From: Tom Rini Date: Mon, 15 Jul 2024 19:35:54 +0000 (-0600) Subject: arm: Remove devkit3250 board X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=26ed58b40f5866c016ea5bc4545ab54a755b419d;p=u-boot.git arm: Remove devkit3250 board This board has not been converted to CONFIG_DM_I2C by the deadline. Remove it. Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig index 185bda41c2..f34c6728f4 100644 --- a/arch/arm/mach-lpc32xx/Kconfig +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -6,9 +6,6 @@ config SYS_SOC choice prompt "NXP LPC32xx board select" -config TARGET_DEVKIT3250 - bool "Timll DevKit3250" - config TARGET_WORK_92105 bool "Work Microwave Work_92105" @@ -17,7 +14,6 @@ config TARGET_EA_LPC3250DEVKITV2 endchoice -source "board/timll/devkit3250/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/ea/ea-lpc3250devkitv2/Kconfig" diff --git a/board/timll/devkit3250/Kconfig b/board/timll/devkit3250/Kconfig deleted file mode 100644 index 5129c2dcae..0000000000 --- a/board/timll/devkit3250/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DEVKIT3250 - -config SYS_BOARD - default "devkit3250" - -config SYS_VENDOR - default "timll" - -config SYS_CONFIG_NAME - default "devkit3250" - -endif diff --git a/board/timll/devkit3250/MAINTAINERS b/board/timll/devkit3250/MAINTAINERS deleted file mode 100644 index cb93563fed..0000000000 --- a/board/timll/devkit3250/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DEVKIT3250 BOARD -M: Vladimir Zapolskiy -S: Maintained -F: board/timll/devkit3250/ -F: include/configs/devkit3250.h -F: configs/devkit3250_defconfig diff --git a/board/timll/devkit3250/Makefile b/board/timll/devkit3250/Makefile deleted file mode 100644 index 056813995e..0000000000 --- a/board/timll/devkit3250/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 by Vladimir Zapolskiy -# Copyright (C) 2008, Guennadi Liakhovetski - -obj-y := devkit3250.o -obj-$(CONFIG_SPL_BUILD) += devkit3250_spl.o diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c deleted file mode 100644 index f0c0f03dee..0000000000 --- a/board/timll/devkit3250/devkit3250.c +++ /dev/null @@ -1,83 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Embest/Timll DevKit3250 board support - * - * Copyright (C) 2011-2015 Vladimir Zapolskiy - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -static struct emc_regs *emc = (struct emc_regs *)EMC_BASE; -static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE; -static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE; - -void reset_periph(void) -{ - /* This function resets peripherals by triggering RESOUT_N */ - setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG); - writel(WDTIM_MCTRL_RESFRC1, &wdt->mctrl); - udelay(300); - - writel(0, &wdt->mctrl); - clrbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG); - - /* Such a long delay is needed to initialize SMSC phy */ - udelay(10000); -} - -int board_early_init_f(void) -{ - lpc32xx_uart_init(CONFIG_CONS_INDEX); - lpc32xx_i2c_init(1); - lpc32xx_i2c_init(2); - lpc32xx_ssp_init(); - lpc32xx_mac_init(); - - /* - * nWP may be controlled by GPO19, but unpopulated by default R23 - * makes no sense to configure this GPIO level, nWP is always high - */ - lpc32xx_slc_nand_init(); - - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_SYS_FLASH_CFI - /* Use 16-bit memory interface for NOR Flash */ - emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT; - - /* Change the NOR timings to optimum value to get maximum bandwidth */ - emc->stat[0].waitwen = EMC_STAT_WAITWEN(1); - emc->stat[0].waitoen = EMC_STAT_WAITOEN(0); - emc->stat[0].waitrd = EMC_STAT_WAITRD(12); - emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12); - emc->stat[0].waitwr = EMC_STAT_WAITWR(5); - emc->stat[0].waitturn = EMC_STAT_WAITTURN(2); -#endif - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE, - CFG_SYS_SDRAM_SIZE); - - return 0; -} diff --git a/board/timll/devkit3250/devkit3250_spl.c b/board/timll/devkit3250/devkit3250_spl.c deleted file mode 100644 index 07a367c3ad..0000000000 --- a/board/timll/devkit3250/devkit3250_spl.c +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Timll DevKit3250 board support, SPL board configuration - * - * (C) Copyright 2015 Vladimir Zapolskiy - */ - -#include -#include -#include -#include -#include -#include - -static struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE; - -/* - * SDRAM K4S561632N-LC60 settings are selected in assumption that - * SDRAM clock may be set up to 166 MHz, however at the moment - * it is 104 MHz. Most delay values are converted to be a multiple of - * base clock, and precise pinned values are not needed here. - */ -struct emc_dram_settings dram_64mb = { - .cmddelay = 0x0001C000, - .config0 = 0x00005682, - .rascas0 = 0x00000302, - .rdconfig = 0x00000011, /* undocumented but crucial value */ - - .trp = 83333333, - .tras = 23809524, - .tsrex = 12500000, - .twr = 83000000, /* tWR = tRDL = 2 CLK */ - .trc = 15384616, - .trfc = 15384616, - .txsr = 12500000, - .trrd = 1, - .tmrd = 1, - .tcdlr = 0, - - .refresh = 130000, /* 800 clock cycles */ - - .mode = 0x00018000, - .emode = 0x02000000, -}; - -void spl_board_init(void) -{ - /* First of all silence buzzer controlled by GPO_20 */ - writel((1 << 20), &gpio->p3_outp_clr); - - lpc32xx_uart_init(CONFIG_CONS_INDEX); - preloader_console_init(); - - ddr_init(&dram_64mb); - - /* - * NAND initialization is done by nand_init(), - * here just enable NAND SLC clocks - */ - lpc32xx_slc_nand_init(); -} - -u32 spl_boot_device(void) -{ - return BOOT_DEVICE_NAND; -} diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig deleted file mode 100644 index 569b156c99..0000000000 --- a/configs/devkit3250_defconfig +++ /dev/null @@ -1,93 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SYS_ICACHE_OFF=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_LPC32XX=y -CONFIG_TEXT_BASE=0x83F00000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f20 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xA0000 -CONFIG_SPL_TEXT_BASE=0x00000000 -CONFIG_SYS_MONITOR_LEN=393216 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK=0xfff8 -CONFIG_SPL=y -CONFIG_SYS_LOAD_ADDR=0x80008000 -CONFIG_BOOTDELAY=1 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200n8" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; setenv bootargs ${bootargs} ${nfsargs} ${userargs}; bootm ${loadaddr} - ${dtbaddr}" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_MAX_SIZE=0x20000 -CONFIG_SPL_NO_BSS_LIMIT=y -CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_NAND_RAW_ONLY=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_SOFTECC=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_SYS_DISABLE_AUTOLOAD=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_VERSION_VARIABLE=y -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y -CONFIG_DMA_LPC32XX=y -CONFIG_LPC32XX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_LPC32XX=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_SHOW_PROGRESS=0 -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_MAX_FLASH_SECT=71 -CONFIG_MTD_RAW_NAND=y -CONFIG_SYS_NAND_USE_FLASH_BBT=y -CONFIG_NAND_LPC32XX_SLC=y -CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 -# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 -CONFIG_PHYLIB=y -CONFIG_PHY_ADDR_ENABLE=y -CONFIG_PHY_ADDR=31 -CONFIG_PHY_SMSC=y -CONFIG_RMII=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_CONS_INDEX=5 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_USB=y -CONFIG_SYS_USB_OHCI_SLOT_NAME="lpc32xx-ohci" -CONFIG_USB_OHCI_LPC32XX=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h deleted file mode 100644 index d85aeaafe5..0000000000 --- a/include/configs/devkit3250.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Embest/Timll DevKit3250 board configuration file - * - * Copyright (C) 2011-2015 Vladimir Zapolskiy - */ - -#ifndef __CONFIG_DEVKIT3250_H__ -#define __CONFIG_DEVKIT3250_H__ - -/* SoC and board defines */ -#include -#include - -/* - * Memory configurations - */ -#define CFG_SYS_SDRAM_BASE EMC_DYCS0_BASE -#define CFG_SYS_SDRAM_SIZE SZ_64M - -/* - * DMA - */ - -/* - * GPIO - */ - -/* - * NOR Flash - */ -#define CFG_SYS_FLASH_BASE EMC_CS0_BASE -#define CFG_SYS_FLASH_SIZE SZ_4M - -/* - * NAND controller - */ -#define CFG_SYS_NAND_BASE SLC_NAND_BASE -#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } - -/* - * NAND chip timings - */ -#define CFG_LPC32XX_NAND_SLC_WDR_CLKS 14 -#define CFG_LPC32XX_NAND_SLC_WWIDTH 66666666 -#define CFG_LPC32XX_NAND_SLC_WHOLD 200000000 -#define CFG_LPC32XX_NAND_SLC_WSETUP 50000000 -#define CFG_LPC32XX_NAND_SLC_RDR_CLKS 14 -#define CFG_LPC32XX_NAND_SLC_RWIDTH 66666666 -#define CFG_LPC32XX_NAND_SLC_RHOLD 200000000 -#define CFG_LPC32XX_NAND_SLC_RSETUP 50000000 - -/* - * USB - */ -#define CFG_USB_ISP1301_I2C_ADDR 0x2d - -/* - * U-Boot General Configurations - */ - -/* - * Pass open firmware flat tree - */ - -/* - * Environment - */ - -#define CFG_EXTRA_ENV_SETTINGS \ - "ethaddr=00:01:90:00:C0:81\0" \ - "dtbaddr=0x81000000\0" \ - "nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0" \ - "tftpdir=vladimir/oe/devkit3250\0" \ - "userargs=oops=panic\0" - -/* - * U-Boot Commands - */ - -/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_TEXT_BASE */ -#define CFG_SYS_NAND_U_BOOT_SIZE 0x60000 - -#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE -#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE - -/* See common/spl/spl.c spl_set_header_raw_uboot() */ - -/* - * Include SoC specific configuration - */ -#include - -#endif /* __CONFIG_DEVKIT3250_H__*/