From: Tom Rini Date: Mon, 15 Jul 2024 19:35:51 +0000 (-0600) Subject: arm: Remove omap4_panda board X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=1104cd616fef3111f851f7058511e45c3081f8cf;p=u-boot.git arm: Remove omap4_panda board This board has not been converted to CONFIG_DM_I2C by the deadline. Remove it. Acked-by: Robert Nelson Signed-off-by: Tom Rini --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a4d95c8306..ff3be954c5 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1013,10 +1013,6 @@ dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb -dtb-$(CONFIG_TARGET_OMAP4_PANDA) += \ - omap4-panda.dtb \ - omap4-panda-es.dtb - dtb-$(CONFIG_TARGET_OMAP4_SDP4430) += \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb diff --git a/arch/arm/dts/omap4-panda-common.dtsi b/arch/arm/dts/omap4-panda-common.dtsi deleted file mode 100644 index 6174fbe280..0000000000 --- a/arch/arm/dts/omap4-panda-common.dtsi +++ /dev/null @@ -1,573 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/ - */ -#include -#include "elpida_ecb240abacn.dtsi" -#include "omap4-mcpdm.dtsi" - -/ { - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &dvi0; - display1 = &hdmi0; - ethernet = ðernet; - }; - - leds: leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = < - &led_wkgpio_pins - >; - - led-heartbeat { - label = "pandaboard::status1"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-mmc { - label = "pandaboard::status2"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - }; - - gpio_keys: gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = < - &button_pins - >; - - buttonS2 { - label = "button S2"; - gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ - linux,code = ; - wakeup-source; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "PandaBoard"; - - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; - - /* HS USB Port 1 Power */ - hsusb1_power: hsusb1_power_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb1_vbus"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */ - startup-delay-us = <70000>; - enable-active-high; - /* - * boot-on is required along with always-on as the - * regulator framework doesn't enable the regulator - * if boot-on is not there. - */ - regulator-always-on; - regulator-boot-on; - }; - - /* HS USB Host PHY on PORT 1 */ - hsusb1_phy: hsusb1_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ - #phy-cells = <0>; - vcc-supply = <&hsusb1_power>; - clocks = <&auxclk3_ck>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - }; - - /* regulator for wl12xx on sdio5 */ - wl12xx_vmmc: wl12xx_vmmc { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_gpio>; - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - startup-delay-us = <70000>; - enable-active-high; - }; - - tfp410: encoder0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - tpd12s015: encoder1 { - compatible = "ti,tpd12s015"; - - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector1 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &dss_dpi_pins - &tfp410_pins - &dss_hdmi_pins - &tpd12s015_pins - &hsusbb1_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ - OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ - >; - }; - - dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ - OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ - OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ - OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ - OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ - OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ - OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ - OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ - OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ - OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ - OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ - - OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ - OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ - OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ - OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ - OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ - OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ - OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ - OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ - OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ - OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ - OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ - OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ - OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ - - OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ - OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ - OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ - >; - }; - - tfp410_pins: pinmux_tfp410_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ - OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ - OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ - >; - }; - - hsusbb1_pins: pinmux_hsusbb1_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ - OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ - OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ - OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ - OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ - OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ - OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ - OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ - OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ - OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ - OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ - >; - }; - - i2c4_pins: pinmux_i2c4_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ - >; - }; - - /* - * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP - * REVISIT: Are the pull-ups needed for GPIO 48 and 49? - */ - wl12xx_gpio: pinmux_wl12xx_gpio { - pinctrl-single,pins = < - OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */ - OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */ - >; - }; - - /* wl12xx GPIO inputs and SDIO pins */ - wl12xx_pins: pinmux_wl12xx_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ - OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ - OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ - OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ - OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ - OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ - >; - }; - - button_pins: pinmux_button_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ - >; - }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* IRQ# = 7 */ - interrupts = ; /* IRQ_SYS_1N cascaded to gic */ - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - #clock-cells = <0>; - reg = <0x4b>; - - pinctrl-names = "default"; - pinctrl-0 = <&twl6040_pins>; - - /* IRQ# = 119 */ - interrupts = ; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - }; -}; - -#include "twl6030.dtsi" -#include "twl6030_omap4.dtsi" - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - clock-frequency = <400000>; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in their EEPROM as EDID data. - * The EEPROM is connected as I2C slave device. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins>; - - clock-frequency = <400000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_pins>; - vmmc-supply = <&wl12xx_vmmc>; - interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core 0x10e>; - non-removable; - bus-width = <4>; - cap-power-off-card; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1271"; - reg = <2>; - /* gpio_53 with gpmc_ncs3 pad as wakeup */ - interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>, - <&omap4_pmx_core 0x3a>; - interrupt-names = "irq", "wakeup"; - ref-clock-frequency = <38400000>; - }; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&mcbsp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp1_pins>; - status = "okay"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -}; - -&uart2 { - interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core OMAP4_UART2_RX>; -}; - -&uart3 { - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core OMAP4_UART3_RX>; -}; - -&uart4 { - interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core OMAP4_UART4_RX>; -}; - -&usb_otg_hs { - interface-type = <1>; - mode = <3>; - power = <50>; -}; - -&usbhshost { - port1-mode = "ehci-phy"; -}; - -&usbhsehci { - phys = <&hsusb1_phy>; - - #address-cells = <1>; - #size-cells = <0>; - - hub@1 { - compatible = "usb424,9514"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - ethernet: ethernet@1 { - compatible = "usb424,ec00"; - reg = <1>; - }; - }; -}; - -&dss { - status = "okay"; - - port { - dpi_out: endpoint { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; - -&dsi2 { - status = "okay"; - vdd-supply = <&vcxio>; -}; - -&hdmi { - status = "okay"; - vdda-supply = <&vdac>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; diff --git a/arch/arm/dts/omap4-panda-es.dts b/arch/arm/dts/omap4-panda-es.dts deleted file mode 100644 index 35e4f345a1..0000000000 --- a/arch/arm/dts/omap4-panda-es.dts +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "omap4460.dtsi" -#include "omap4-panda-common.dtsi" - -/ { - model = "TI OMAP4 PandaBoard-ES"; - compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; -}; - -/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ -&sound { - ti,model = "PandaBoardES"; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "AFML", "Line In", - "AFMR", "Line In"; -}; - -/* PandaboardES has external pullups on SCL & SDA */ -&dss_hdmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ - >; -}; - -&omap4_pmx_core { - led_gpio_pins: gpio_led_pmx { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ - >; - }; - - button_pins: pinmux_button_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ - >; - }; -}; - -&led_wkgpio_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; -}; - -&leds { - pinctrl-0 = < - &led_gpio_pins - &led_wkgpio_pins - >; - - led-heartbeat { - gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; - }; - led-mmc { - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; -}; - -&gpio_keys { - buttonS2 { - gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ - }; -}; - -&gpio1_target { - ti,no-reset-on-init; -}; diff --git a/arch/arm/dts/omap4-panda.dts b/arch/arm/dts/omap4-panda.dts deleted file mode 100644 index 529d5bccea..0000000000 --- a/arch/arm/dts/omap4-panda.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "omap443x.dtsi" -#include "omap4-panda-common.dtsi" - -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; -}; diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig index cdac11c6b6..5c5ac4ff33 100644 --- a/arch/arm/mach-omap2/omap4/Kconfig +++ b/arch/arm/mach-omap2/omap4/Kconfig @@ -4,9 +4,6 @@ choice prompt "OMAP4 board select" optional -config TARGET_OMAP4_PANDA - bool "TI OMAP4 PandaBoard" - config TARGET_OMAP4_SDP4430 bool "TI OMAP4 SDP4430" @@ -15,7 +12,6 @@ endchoice config SYS_SOC default "omap4" -source "board/ti/panda/Kconfig" source "board/ti/sdp4430/Kconfig" endif diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig deleted file mode 100644 index 5912f69bab..0000000000 --- a/board/ti/panda/Kconfig +++ /dev/null @@ -1,14 +0,0 @@ -if TARGET_OMAP4_PANDA - -config SYS_BOARD - default "panda" - -config SYS_VENDOR - default "ti" - -config SYS_CONFIG_NAME - default "omap4_panda" - -source "board/ti/common/Kconfig" - -endif diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS deleted file mode 100644 index 8b8cf7daf6..0000000000 --- a/board/ti/panda/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PANDA BOARD -M: Tom Rini -S: Maintained -F: board/ti/panda/ -F: include/configs/omap4_panda.h -F: configs/omap4_panda_defconfig diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile deleted file mode 100644 index dd2ff33afa..0000000000 --- a/board/ti/panda/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y := panda.o diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c deleted file mode 100644 index e47d3a952d..0000000000 --- a/board/ti/panda/panda.c +++ /dev/null @@ -1,322 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, - * Steve Sakoman - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "panda_mux_data.h" - -#define PANDA_ULPI_PHY_TYPE_GPIO 182 -#define PANDA_BOARD_ID_1_GPIO 101 -#define PANDA_ES_BOARD_ID_1_GPIO 48 -#define PANDA_BOARD_ID_2_GPIO 171 -#define PANDA_ES_BOARD_ID_3_GPIO 3 -#define PANDA_ES_BOARD_ID_4_GPIO 2 - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: OMAP4 Panda\n" -}; - -struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; - -/** - * @brief board_init - * - * Return: 0 - */ -int board_init(void) -{ - gpmc_init(); - - gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA; - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - - return 0; -} - -#if defined(CONFIG_SPL_OS_BOOT) -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - if (serial_tstc() && serial_getc() == 'c') - return 1; - - return 0; -} -#endif /* CONFIG_SPL_OS_BOOT */ - -int board_eth_init(struct bd_info *bis) -{ - return 0; -} - -/* -* Routine: get_board_revision -* Description: Detect if we are running on a panda revision A1-A6, -* or an ES panda board. This can be done by reading -* the level of GPIOs and checking the processor revisions. -* This should result in: -* Panda 4430: -* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5 -* GPIO171, GPIO101, GPIO182: 1 0 1 => A6 -* Panda ES: -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2 -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3 -*/ -int get_board_revision(void) -{ - int board_id0, board_id1, board_id2; - int board_id3, board_id4; - int board_id; - - int processor_rev = omap_revision(); - - /* Setup the mux for the common board ID pins (gpio 171 and 182) */ - writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0); - writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT); - - board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); - board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO); - - if ((processor_rev >= OMAP4460_ES1_0 && - processor_rev <= OMAP4460_ES1_1)) { - /* - * Setup the mux for the ES specific board ID pins (gpio 101, - * 2 and 3. - */ - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - GPMC_A24); - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - UNIPRO_RY0); - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - UNIPRO_RX1); - - board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO); - board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO); - board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO); - -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - env_set("board_name", "panda-es"); -#endif - board_id = ((board_id4 << 4) | (board_id3 << 3) | - (board_id2 << 2) | (board_id1 << 1) | (board_id0)); - } else { - /* Setup the mux for the Ax specific board ID pins (gpio 101) */ - writew((IEN | M3), (*ctrl)->control_padconf_core_base + - FREF_CLK2_OUT); - - board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO); - board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0)); - -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3)) - env_set("board_name", "panda-a4"); -#endif - } - - return board_id; -} - -/** - * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES - * - * - * Detect if we are running on B3 version of ES panda board, - * This can be done by reading the level of GPIO 171 and checking the - * processor revisions. - * GPIO171: 1 => Panda ES Rev B3 - * - * Return : return 1 if Panda ES Rev B3 , else return 0 - */ -u8 is_panda_es_rev_b3(void) -{ - int processor_rev = omap_revision(); - int ret = 0; - - if ((processor_rev >= OMAP4460_ES1_0 && - processor_rev <= OMAP4460_ES1_1)) { - - /* Setup the mux for the common board ID pins (gpio 171) */ - writew((IEN | M3), - (*ctrl)->control_padconf_core_base + UNIPRO_TX0); - - /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */ - ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO); - } - return ret; -} - -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -/* - * emif_get_reg_dump() - emif_get_reg_dump strong function - * - * @emif_nr - emif base - * @regs - reg dump of timing values - * - * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c - */ -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) -{ - u32 omap4_rev = omap_revision(); - - /* Same devices and geometry on both EMIFs */ - if (omap4_rev == OMAP4430_ES1_0) - *regs = &emif_regs_elpida_380_mhz_1cs; - else if (omap4_rev == OMAP4430_ES2_0) - *regs = &emif_regs_elpida_200_mhz_2cs; - else if (omap4_rev == OMAP4430_ES2_3) - *regs = &emif_regs_elpida_400_mhz_1cs; - else if (omap4_rev < OMAP4470_ES1_0) { - if(is_panda_es_rev_b3()) - *regs = &emif_regs_elpida_400_mhz_1cs; - else - *regs = &emif_regs_elpida_400_mhz_2cs; - } - else - *regs = &emif_regs_elpida_400_mhz_1cs; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - u32 omap_rev = omap_revision(); - - if (omap_rev == OMAP4430_ES1_0) - *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; - else if (omap_rev == OMAP4430_ES2_3) - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; - else if (omap_rev < OMAP4460_ES1_0) - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; - else - *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; -} - -#endif - -/** - * @brief misc_init_r - Configure Panda board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * Return: 0 - */ -int misc_init_r(void) -{ - int phy_type; - u32 auxclk, altclksrc; - - /* EHCI is not supported on ES1.0 */ - if (omap_revision() == OMAP4430_ES1_0) - return 0; - - get_board_revision(); - - gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO); - phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); - - if (phy_type == 1) { - /* ULPI PHY supplied by auxclk3 derived from sys_clk */ - debug("ULPI PHY supplied by auxclk3\n"); - - auxclk = readl(&scrm->auxclk3); - /* Select sys_clk */ - auxclk &= ~AUXCLK_SRCSELECT_MASK; - auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT; - /* Set the divisor to 2 */ - auxclk &= ~AUXCLK_CLKDIV_MASK; - auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT; - /* Request auxilary clock #3 */ - auxclk |= AUXCLK_ENABLE_MASK; - - writel(auxclk, &scrm->auxclk3); - } else { - /* ULPI PHY supplied by auxclk1 derived from PER dpll */ - debug("ULPI PHY supplied by auxclk1\n"); - - auxclk = readl(&scrm->auxclk1); - /* Select per DPLL */ - auxclk &= ~AUXCLK_SRCSELECT_MASK; - auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT; - /* Set the divisor to 16 */ - auxclk &= ~AUXCLK_CLKDIV_MASK; - auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT; - /* Request auxilary clock #3 */ - auxclk |= AUXCLK_ENABLE_MASK; - - writel(auxclk, &scrm->auxclk1); - } - - altclksrc = readl(&scrm->altclksrc); - - /* Activate alternate system clock supplier */ - altclksrc &= ~ALTCLKSRC_MODE_MASK; - altclksrc |= ALTCLKSRC_MODE_ACTIVE; - - /* enable clocks */ - altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK; - - writel(altclksrc, &scrm->altclksrc); - - omap_die_id_usbethaddr(); - - return 0; -} - -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - if (omap_revision() >= OMAP4460_ES1_0) - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential_4460, - sizeof(wkup_padconf_array_essential_4460) / - sizeof(struct pad_conf_entry)); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(struct bd_info *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} - -#if !defined(CONFIG_SPL_BUILD) -void board_mmc_power_init(void) -{ - twl6030_power_mmc_init(0); -} -#endif -#endif - -#ifdef CONFIG_REVISION_TAG -/* - * get_board_rev() - get board revision - */ -u32 get_board_rev(void) -{ - return 0x20; -} -#endif diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h deleted file mode 100644 index 3bf6c0146c..0000000000 --- a/board/ti/panda/panda_mux_data.h +++ /dev/null @@ -1,85 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated, - * - * Balaji Krishnamoorthy - * Aneesh V - */ -#ifndef _PANDA_MUX_DATA_H_ -#define _PANDA_MUX_DATA_H_ - -#include - -const struct pad_conf_entry core_padconf_array_essential[] = { - -{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)}, /* uart3_tx */ -{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ -{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ -{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ -{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ -{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ -{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ -{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ -{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ -{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ -{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ -{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ -{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ -{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ -{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ -{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ -{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ -{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */ -{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */ -{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - -{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ -{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ -{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ - -}; - -const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { - -{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */ - -}; - -#endif /* _PANDA_MUX_DATA_H_ */ diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig deleted file mode 100644 index 131056be63..0000000000 --- a/configs/omap4_panda_defconfig +++ /dev/null @@ -1,54 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_L2_PL310=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_MALLOC_F_LEN=0x4000 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030df00 -CONFIG_DEFAULT_DEVICE_TREE="omap4-panda" -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_OMAP44XX=y -CONFIG_TARGET_OMAP4_PANDA=y -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_DEFAULT_FDT_FILE="omap4-panda.dtb" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SPL_MAX_SIZE=0xbc00 -CONFIG_SPL_SYS_MALLOC=y -CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 -# CONFIG_SPL_FS_EXT4 is not set -# CONFIG_SPL_I2C is not set -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_FALCON_BOOT_MMCSD=y -CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 -CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 -CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_VERSION_VARIABLE=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_MMC_OMAP_HS=y -CONFIG_TWL6030_POWER=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OMAP3=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_USB_GADGET=y diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h deleted file mode 100644 index 69749ab630..0000000000 --- a/include/configs/omap4_panda.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated. - * Steve Sakoman - * - * Configuration settings for the TI OMAP4 Panda board. - * See ti_omap4_common.h for OMAP4 common part - */ - -#ifndef __CONFIG_PANDA_H -#define __CONFIG_PANDA_H - -#include - -#endif /* __CONFIG_PANDA_H */