mtd: spi-nor.h: Change spaces to tabs

U-Boot coding convention prefers tabs over spaces.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 4a8e19ee4f9661df46cdd37de160510531c1742c..0c438e9c89019825b7bdae368870ff311b87d2da 100644 (file)
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -48,13 +48,13 @@
 #define SPINOR_OP_READ_1_2_2   0xbb    /* Read data bytes (Dual I/O SPI) */
 #define SPINOR_OP_READ_1_1_4   0x6b    /* Read data bytes (Quad Output SPI) */
 #define SPINOR_OP_READ_1_4_4   0xeb    /* Read data bytes (Quad I/O SPI) */
-#define SPINOR_OP_READ_1_1_8   0x8b    /* Read data bytes (Octal Output SPI) */
-#define SPINOR_OP_READ_1_8_8   0xcb    /* Read data bytes (Octal I/O SPI) */
+#define SPINOR_OP_READ_1_1_8   0x8b    /* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8   0xcb    /* Read data bytes (Octal I/O SPI) */
 #define SPINOR_OP_PP           0x02    /* Page program (up to 256 bytes) */
 #define SPINOR_OP_PP_1_1_4     0x32    /* Quad page program */
 #define SPINOR_OP_PP_1_4_4     0x38    /* Quad page program */
-#define SPINOR_OP_PP_1_1_8     0x82    /* Octal page program */
-#define SPINOR_OP_PP_1_8_8     0xc2    /* Octal page program */
+#define SPINOR_OP_PP_1_1_8     0x82    /* Octal page program */
+#define SPINOR_OP_PP_1_8_8     0xc2    /* Octal page program */
 #define SPINOR_OP_BE_4K                0x20    /* Erase 4KiB block */
 #define SPINOR_OP_BE_4K_PMC    0xd7    /* Erase 4KiB block on PMC chips */
 #define SPINOR_OP_BE_32K       0x52    /* Erase 32KiB block */
@@ -75,13 +75,13 @@
 #define SPINOR_OP_READ_1_2_2_4B        0xbc    /* Read data bytes (Dual I/O SPI) */
 #define SPINOR_OP_READ_1_1_4_4B        0x6c    /* Read data bytes (Quad Output SPI) */
 #define SPINOR_OP_READ_1_4_4_4B        0xec    /* Read data bytes (Quad I/O SPI) */
-#define SPINOR_OP_READ_1_1_8_4B        0x7c    /* Read data bytes (Octal Output SPI) */
-#define SPINOR_OP_READ_1_8_8_4B        0xcc    /* Read data bytes (Octal I/O SPI) */
+#define SPINOR_OP_READ_1_1_8_4B        0x7c    /* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8_4B        0xcc    /* Read data bytes (Octal I/O SPI) */
 #define SPINOR_OP_PP_4B                0x12    /* Page program (up to 256 bytes) */
 #define SPINOR_OP_PP_1_1_4_4B  0x34    /* Quad page program */
 #define SPINOR_OP_PP_1_4_4_4B  0x3e    /* Quad page program */
-#define SPINOR_OP_PP_1_1_8_4B  0x84    /* Octal page program */
-#define SPINOR_OP_PP_1_8_8_4B  0x8e    /* Octal page program */
+#define SPINOR_OP_PP_1_1_8_4B  0x84    /* Octal page program */
+#define SPINOR_OP_PP_1_8_8_4B  0x8e    /* Octal page program */
 #define SPINOR_OP_BE_4K_4B     0x21    /* Erase 4KiB block */
 #define SPINOR_OP_BE_32K_4B    0x5c    /* Erase 32KiB block */
 #define SPINOR_OP_SE_4B                0xdc    /* Sector erase (usually 64KiB) */
@@ -122,8 +122,8 @@
 #define SPINOR_OP_CLSR         0x30    /* Clear status register 1 */
 
 /* Used for Micron flashes only. */
-#define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
-#define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
+#define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
+#define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
 
 /* Status Register bits. */
 #define SR_WIP                 BIT(0)  /* Write in progress */