]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
phy: add nxp tja1103 phy driver
authorRadu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Fri, 18 Jun 2021 18:58:30 +0000 (21:58 +0300)
committerRamon Fried <rfried.dev@gmail.com>
Tue, 6 Jul 2021 02:22:41 +0000 (05:22 +0300)
Add nxp tja1103 phy driver.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
MAINTAINERS
drivers/net/phy/Kconfig
drivers/net/phy/Makefile
drivers/net/phy/nxp-c45-tja11xx.c [new file with mode: 0644]
drivers/net/phy/phy.c
include/phy.h

index 4be95cc8456593851b1d4d5ffae60a6a0abb4dd9..fbe6623d994853e12fbaa6d3bfad1a39b79548ab 100644 (file)
@@ -922,6 +922,11 @@ F: cmd/nvme.c
 F:     include/nvme.h
 F:     doc/develop/driver-model/nvme.rst
 
+NXP C45 TJA11XX PHY DRIVER
+M:     Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
+S:     Maintained
+F:     drivers/net/phy/nxp-c45-tja11xx.c
+
 ONENAND
 #M:    Lukasz Majewski <l.majewski@majess.pl>
 S:     Orphaned (Since 2017-01)
index 070ffa82cb9eb4a92a8d58677ffe809bb79de27c..405bf7675308c4a3e0ff1ec010f030ad9e566271 100644 (file)
@@ -197,6 +197,12 @@ config PHY_MSCC
 config PHY_NATSEMI
        bool "National Semiconductor Ethernet PHYs support"
 
+config PHY_NXP_C45_TJA11XX
+       tristate "NXP C45 TJA11XX PHYs"
+       help
+         Enable support for NXP C45 TJA11XX PHYs.
+         Currently supports only the TJA1103 PHY.
+
 config PHY_REALTEK
        bool "Realtek Ethernet PHYs support"
 
index e967f822016975851549ead5b82fc85cdbe8701f..218b8c7669b9ff48d7e7c286f558e4123300b84c 100644 (file)
@@ -23,6 +23,7 @@ obj-$(CONFIG_PHY_MICREL_KSZ8XXX) += micrel_ksz8xxx.o
 obj-$(CONFIG_PHY_MICREL_KSZ90X1) += micrel_ksz90x1.o
 obj-$(CONFIG_PHY_MESON_GXL) += meson-gxl.o
 obj-$(CONFIG_PHY_NATSEMI) += natsemi.o
+obj-$(CONFIG_PHY_NXP_C45_TJA11XX) += nxp-c45-tja11xx.o
 obj-$(CONFIG_PHY_REALTEK) += realtek.o
 obj-$(CONFIG_PHY_SMSC) += smsc.o
 obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
new file mode 100644 (file)
index 0000000..f86e31f
--- /dev/null
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP C45 PHY driver
+ *
+ * Copyright 2021 NXP
+ * Author: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
+ */
+#include <common.h>
+#include <dm.h>
+#include <dm/devres.h>
+#include <linux/delay.h>
+#include <linux/math64.h>
+#include <linux/mdio.h>
+#include <phy.h>
+
+#define PHY_ID_TJA_1103                        0x001BB010
+
+#define VEND1_DEVICE_CONTROL           0x0040
+#define DEVICE_CONTROL_RESET           BIT(15)
+#define DEVICE_CONTROL_CONFIG_GLOBAL_EN        BIT(14)
+#define DEVICE_CONTROL_CONFIG_ALL_EN   BIT(13)
+
+#define VEND1_PORT_CONTROL             0x8040
+#define PORT_CONTROL_EN                        BIT(14)
+
+#define VEND1_PHY_CONTROL              0x8100
+#define PHY_CONFIG_EN                  BIT(14)
+#define PHY_START_OP                   BIT(0)
+
+#define VEND1_PHY_CONFIG               0x8108
+#define PHY_CONFIG_AUTO                        BIT(0)
+
+#define VEND1_PORT_INFRA_CONTROL       0xAC00
+#define PORT_INFRA_CONTROL_EN          BIT(14)
+
+#define VEND1_RXID                     0xAFCC
+#define VEND1_TXID                     0xAFCD
+#define ID_ENABLE                      BIT(15)
+
+#define VEND1_ABILITIES                        0xAFC4
+#define RGMII_ID_ABILITY               BIT(15)
+#define RGMII_ABILITY                  BIT(14)
+#define RMII_ABILITY                   BIT(10)
+#define REVMII_ABILITY                 BIT(9)
+#define MII_ABILITY                    BIT(8)
+#define SGMII_ABILITY                  BIT(0)
+
+#define VEND1_MII_BASIC_CONFIG         0xAFC6
+#define MII_BASIC_CONFIG_REV           BIT(8)
+#define MII_BASIC_CONFIG_SGMII         0x9
+#define MII_BASIC_CONFIG_RGMII         0x7
+#define MII_BASIC_CONFIG_RMII          0x5
+#define MII_BASIC_CONFIG_MII           0x4
+
+#define RGMII_PERIOD_PS                        8000U
+#define PS_PER_DEGREE                  div_u64(RGMII_PERIOD_PS, 360)
+#define MIN_ID_PS                      1644U
+#define MAX_ID_PS                      2260U
+#define DEFAULT_ID_PS                  2000U
+
+#define RESET_DELAY_MS                 25
+#define CONF_EN_DELAY_US               450
+
+struct nxp_c45_phy {
+       u32 tx_delay;
+       u32 rx_delay;
+};
+
+static int nxp_c45_soft_reset(struct phy_device *phydev)
+{
+       int tries = 10, ret;
+
+       ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL,
+                           DEVICE_CONTROL_RESET);
+       if (ret)
+               return ret;
+
+       do {
+               ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+                                  VEND1_DEVICE_CONTROL);
+               if (!(ret & DEVICE_CONTROL_RESET))
+                       return 0;
+               mdelay(RESET_DELAY_MS);
+       } while (tries--);
+
+       return -EIO;
+}
+
+static int nxp_c45_start_op(struct phy_device *phydev)
+{
+       return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL,
+                            PHY_START_OP);
+}
+
+static int nxp_c45_config_enable(struct phy_device *phydev)
+{
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL,
+                     DEVICE_CONTROL_CONFIG_GLOBAL_EN |
+                     DEVICE_CONTROL_CONFIG_ALL_EN);
+       udelay(CONF_EN_DELAY_US);
+
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_CONTROL,
+                     PORT_CONTROL_EN);
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL,
+                     PHY_CONFIG_EN);
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_INFRA_CONTROL,
+                     PORT_INFRA_CONTROL_EN);
+
+       return 0;
+}
+
+static u64 nxp_c45_get_phase_shift(u64 phase_offset_raw)
+{
+       /* The delay in degree phase is 73.8 + phase_offset_raw * 0.9.
+        * To avoid floating point operations we'll multiply by 10
+        * and get 1 decimal point precision.
+        */
+       phase_offset_raw *= 10;
+       phase_offset_raw -= 738;
+       return div_u64(phase_offset_raw, 9);
+}
+
+static void nxp_c45_disable_delays(struct phy_device *phydev)
+{
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0);
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0);
+}
+
+static int nxp_c45_check_delay(struct phy_device *phydev, u32 delay)
+{
+       if (delay < MIN_ID_PS) {
+               pr_err("%s: delay value smaller than %u\n",
+                      phydev->drv->name, MIN_ID_PS);
+               return -EINVAL;
+       }
+
+       if (delay > MAX_ID_PS) {
+               pr_err("%s: delay value higher than %u\n",
+                      phydev->drv->name, MAX_ID_PS);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int nxp_c45_get_delays(struct phy_device *phydev)
+{
+       struct nxp_c45_phy *priv = phydev->priv;
+       int ret;
+
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+               ret = dev_read_u32(phydev->dev, "tx-internal-delay-ps",
+                                  &priv->tx_delay);
+               if (ret)
+                       priv->tx_delay = DEFAULT_ID_PS;
+
+               ret = nxp_c45_check_delay(phydev, priv->tx_delay);
+               if (ret) {
+                       pr_err("%s: tx-internal-delay-ps invalid value\n",
+                              phydev->drv->name);
+                       return ret;
+               }
+       }
+
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+               ret = dev_read_u32(phydev->dev, "rx-internal-delay-ps",
+                                  &priv->rx_delay);
+               if (ret)
+                       priv->rx_delay = DEFAULT_ID_PS;
+
+               ret = nxp_c45_check_delay(phydev, priv->rx_delay);
+               if (ret) {
+                       pr_err("%s: rx-internal-delay-ps invalid value\n",
+                              phydev->drv->name);
+                       return ret;
+               }
+       }
+
+       return 0;
+}
+
+static void nxp_c45_set_delays(struct phy_device *phydev)
+{
+       struct nxp_c45_phy *priv = phydev->priv;
+       u64 tx_delay = priv->tx_delay;
+       u64 rx_delay = priv->rx_delay;
+       u64 degree;
+
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+               degree = div_u64(tx_delay, PS_PER_DEGREE);
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID,
+                             ID_ENABLE | nxp_c45_get_phase_shift(degree));
+       } else {
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0);
+       }
+
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+               degree = div_u64(rx_delay, PS_PER_DEGREE);
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID,
+                             ID_ENABLE | nxp_c45_get_phase_shift(degree));
+       } else {
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0);
+       }
+}
+
+static int nxp_c45_set_phy_mode(struct phy_device *phydev)
+{
+       int ret;
+
+       ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES);
+       pr_debug("%s: Clause 45 managed PHY abilities 0x%x\n",
+                phydev->drv->name, ret);
+
+       switch (phydev->interface) {
+       case PHY_INTERFACE_MODE_RGMII:
+               if (!(ret & RGMII_ABILITY)) {
+                       pr_err("%s: rgmii mode not supported\n",
+                              phydev->drv->name);
+                       return -EINVAL;
+               }
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+                             MII_BASIC_CONFIG_RGMII);
+               nxp_c45_disable_delays(phydev);
+               break;
+       case PHY_INTERFACE_MODE_RGMII_ID:
+       case PHY_INTERFACE_MODE_RGMII_TXID:
+       case PHY_INTERFACE_MODE_RGMII_RXID:
+               if (!(ret & RGMII_ID_ABILITY)) {
+                       pr_err("%s: rgmii-id, rgmii-txid, rgmii-rxid modes are not supported\n",
+                              phydev->drv->name);
+                       return -EINVAL;
+               }
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+                             MII_BASIC_CONFIG_RGMII);
+               ret = nxp_c45_get_delays(phydev);
+               if (ret)
+                       return ret;
+
+               nxp_c45_set_delays(phydev);
+               break;
+       case PHY_INTERFACE_MODE_MII:
+               if (!(ret & MII_ABILITY)) {
+                       pr_err("%s: mii mode not supported\n",
+                              phydev->drv->name);
+                       return -EINVAL;
+               }
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+                             MII_BASIC_CONFIG_MII);
+               break;
+       case PHY_INTERFACE_MODE_RMII:
+               if (!(ret & RMII_ABILITY)) {
+                       pr_err("%s: rmii mode not supported\n",
+                              phydev->drv->name);
+                       return -EINVAL;
+               }
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+                             MII_BASIC_CONFIG_RMII);
+               break;
+       case PHY_INTERFACE_MODE_SGMII:
+               if (!(ret & SGMII_ABILITY)) {
+                       pr_err("%s: sgmii mode not supported\n",
+                              phydev->drv->name);
+                       return -EINVAL;
+               }
+               phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+                             MII_BASIC_CONFIG_SGMII);
+               break;
+       case PHY_INTERFACE_MODE_INTERNAL:
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int nxp_c45_config(struct phy_device *phydev)
+{
+       int ret;
+
+       ret = nxp_c45_soft_reset(phydev);
+       if (ret)
+               return ret;
+
+       ret = nxp_c45_config_enable(phydev);
+       if (ret) {
+               pr_err("%s: Failed to enable config\n", phydev->drv->name);
+               return ret;
+       }
+
+       phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG,
+                     PHY_CONFIG_AUTO);
+
+       ret = nxp_c45_set_phy_mode(phydev);
+       if (ret) {
+               pr_err("%s: Failed to set phy mode\n", phydev->drv->name);
+               return ret;
+       }
+
+       phydev->autoneg = AUTONEG_DISABLE;
+
+       return nxp_c45_start_op(phydev);
+}
+
+static int nxp_c45_startup(struct phy_device *phydev)
+{
+       u32 reg;
+
+       reg = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1);
+       phydev->link = !!(reg & MDIO_STAT1_LSTATUS);
+       phydev->speed = SPEED_100;
+       phydev->duplex = DUPLEX_FULL;
+       return 0;
+}
+
+static int nxp_c45_probe(struct phy_device *phydev)
+{
+       struct nxp_c45_phy *priv;
+
+       priv = devm_kzalloc(phydev->priv, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       phydev->priv = priv;
+
+       return 0;
+}
+
+static struct phy_driver nxp_tja11xx = {
+       .name = "NXP C45 TJA1103",
+       .uid  = PHY_ID_TJA_1103,
+       .mask = 0xfffff0,
+       .features = PHY_100BT1_FEATURES,
+       .probe = &nxp_c45_probe,
+       .config = &nxp_c45_config,
+       .startup = &nxp_c45_startup,
+       .shutdown = &genphy_shutdown,
+};
+
+int phy_nxp_tja11xx_init(void)
+{
+       phy_register(&nxp_tja11xx);
+       return 0;
+}
index ed197fa46d737593cf65439a00873d30f9b3dc6e..69acb694606193adfc3aeb6559d0df5c8427c639 100644 (file)
@@ -529,6 +529,9 @@ int phy_init(void)
 #ifdef CONFIG_PHY_NATSEMI
        phy_natsemi_init();
 #endif
+#ifdef CONFIG_NXP_C45_TJA11XX_PHY
+       phy_nxp_tja11xx_init();
+#endif
 #ifdef CONFIG_PHY_REALTEK
        phy_realtek_init();
 #endif
index 2754421ed4fb813006b94240df4d46cc8479990c..6b928636b6d7e879b06dec67359c8c9977b61666 100644 (file)
@@ -51,6 +51,10 @@ struct udevice;
                                 PHY_100BT_FEATURES | \
                                 PHY_DEFAULT_FEATURES)
 
+#define PHY_100BT1_FEATURES    (SUPPORTED_TP | \
+                                SUPPORTED_MII | \
+                                SUPPORTED_100baseT_Full)
+
 #define PHY_GBIT_FEATURES      (PHY_BASIC_FEATURES | \
                                 PHY_1000BT_FEATURES)
 
@@ -523,6 +527,7 @@ int phy_micrel_ksz8xxx_init(void);
 int phy_micrel_ksz90x1_init(void);
 int phy_meson_gxl_init(void);
 int phy_natsemi_init(void);
+int phy_nxp_tja11xx_init(void);
 int phy_realtek_init(void);
 int phy_smsc_init(void);
 int phy_teranetics_init(void);