From 4f490402c4acbca5c189db24c445220b10557cee Mon Sep 17 00:00:00 2001
From: "Cooper Jr., Franklin" <fcooper@ti.com>
Date: Fri, 16 Jun 2017 17:25:26 -0500
Subject: [PATCH] ARM: k2g: Use board detection to wrap K2G GP specific calls
Certain peripherals used by K2G GP aren't used on K2G ICE evm. Or
configuration is slightly different. Therefore, use board detection to
deal with these variations.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
board/ti/ks2_evm/board_k2g.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 362231286b..9001255f82 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -208,7 +208,9 @@ int board_mmc_init(bd_t *bis)
return -1;
}
- omap_mmc_init(0, 0, 0, -1, -1);
+ if (board_is_k2g_gp())
+ omap_mmc_init(0, 0, 0, -1, -1);
+
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
@@ -278,11 +280,13 @@ int embedded_dtb_select(void)
k2g_reset_mux_config();
- /* deassert FLASH_HOLD */
- clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
- BIT(9));
- setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
- BIT(9));
+ if (board_is_k2g_gp()) {
+ /* deassert FLASH_HOLD */
+ clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
+ BIT(9));
+ setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
+ BIT(9));
+ }
return 0;
}
--
2.39.5