From: Tom Rini Date: Wed, 10 Feb 2021 17:51:25 +0000 (-0500) Subject: sh: Remove sh7757lcr board X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.Permalink%20%7D%7D?a=commitdiff_plain;h=f0debb2136c5908a5fbf7e3bd7eb15a8984044bc;p=u-boot.git sh: Remove sh7757lcr board This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. As this is the last SH4A board, remove that support as well. Cc: Marek Vasut Signed-off-by: Tom Rini --- diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d8d2a7ffe9..2e9ccf7632 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -4,19 +4,6 @@ menu "SuperH architecture" config CPU_SH4 bool -config CPU_SH4A - bool - select CPU_SH4 - -config SH_32BIT - bool "32bit mode" - depends on CPU_SH4A - default n - help - SH4A has 2 physical memory maps. This use 32bit mode. - And this is board specific. Please check your board if you - want to use this. - choice prompt "Target select" optional @@ -25,10 +12,6 @@ config TARGET_R2DPLUS bool "Renesas R2D-PLUS" select CPU_SH4 -config TARGET_SH7757LCR - bool "SH7757LCR" - select CPU_SH4A - config TARGET_SH7763RDP bool "SH7763RDP" select CPU_SH4 @@ -44,7 +27,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" source "board/renesas/r2dplus/Kconfig" -source "board/renesas/sh7757lcr/Kconfig" source "board/renesas/sh7763rdp/Kconfig" endmenu diff --git a/arch/sh/include/asm/cpu_sh4.h b/arch/sh/include/asm/cpu_sh4.h index 5fc9c962d8..ed7c243b3b 100644 --- a/arch/sh/include/asm/cpu_sh4.h +++ b/arch/sh/include/asm/cpu_sh4.h @@ -46,29 +46,4 @@ # error "Unknown SH4 variant" #endif -#if defined(CONFIG_SH_32BIT) -#define PMB_ADDR_ARRAY 0xf6100000 -#define PMB_ADDR_ENTRY 8 -#define PMB_VPN 24 - -#define PMB_DATA_ARRAY 0xf7100000 -#define PMB_DATA_ENTRY 8 -#define PMB_PPN 24 -#define PMB_UB 9 /* Buffered write */ -#define PMB_V 8 /* Valid */ -#define PMB_SZ1 7 /* Page size (upper bit) */ -#define PMB_SZ0 4 /* Page size (lower bit) */ -#define PMB_C 3 /* Cacheability */ -#define PMB_WT 0 /* Write-through */ - -#define PMB_ADDR_BASE(entry) (PMB_ADDR_ARRAY + (entry << PMB_ADDR_ENTRY)) -#define PMB_DATA_BASE(entry) (PMB_DATA_ARRAY + (entry << PMB_DATA_ENTRY)) -#define mk_pmb_addr_val(vpn) ((vpn << PMB_VPN)) -#define mk_pmb_data_val(ppn, ub, v, sz1, sz0, c, wt) \ - ((ppn << PMB_PPN) | (ub << PMB_UB) | \ - (v << PMB_V) | (sz1 << PMB_SZ1) | \ - (sz0 << PMB_SZ0) | (c << PMB_C) | \ - (wt << PMB_WT)) -#endif - #endif /* _ASM_CPU_SH4_H_ */ diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h index 24b5ce8e30..ccc79b3c91 100644 --- a/arch/sh/include/asm/system.h +++ b/arch/sh/include/asm/system.h @@ -70,18 +70,6 @@ static inline void sched_cacheflush(void) { } -#ifdef CONFIG_CPU_SH4A -#define __icbi() \ -{ \ - unsigned long __addr; \ - __addr = 0xa8000000; \ - __asm__ __volatile__( \ - "icbi %0\n\t" \ - : /* no output */ \ - : "m" (__m(__addr))); \ -} -#endif - static inline unsigned long tas(volatile int *m) { unsigned long retval; @@ -100,25 +88,14 @@ static inline unsigned long tas(volatile int *m) * effect. On newer cores (like the sh4a and sh5) this is accomplished * with icbi. * - * Also note that on sh4a in the icbi case we can forego a synco for the - * write barrier, as it's not necessary for control registers. - * * Historically we have only done this type of barrier for the MMUCR, but * it's also necessary for the CCR, so we make it generic here instead. */ -#ifdef CONFIG_CPU_SH4A -#define mb() __asm__ __volatile__ ("synco": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("synco": : :"memory") -#define ctrl_barrier() __icbi() -#define read_barrier_depends() do { } while(0) -#else #define mb() __asm__ __volatile__ ("": : :"memory") #define rmb() mb() #define wmb() __asm__ __volatile__ ("": : :"memory") #define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") #define read_barrier_depends() do { } while(0) -#endif #ifdef CONFIG_SMP #define smp_mb() mb() diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h deleted file mode 100644 index 9f4dd252c9..0000000000 --- a/arch/sh/include/asm/unaligned-sh4a.h +++ /dev/null @@ -1,258 +0,0 @@ -#ifndef __ASM_SH_UNALIGNED_SH4A_H -#define __ASM_SH_UNALIGNED_SH4A_H - -/* - * SH-4A has support for unaligned 32-bit loads, and 32-bit loads only. - * Support for 64-bit accesses are done through shifting and masking - * relative to the endianness. Unaligned stores are not supported by the - * instruction encoding, so these continue to use the packed - * struct. - * - * The same note as with the movli.l/movco.l pair applies here, as long - * as the load is gauranteed to be inlined, nothing else will hook in to - * r0 and we get the return value for free. - * - * NOTE: Due to the fact we require r0 encoding, care should be taken to - * avoid mixing these heavily with other r0 consumers, such as the atomic - * ops. Failure to adhere to this can result in the compiler running out - * of spill registers and blowing up when building at low optimization - * levels. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34777. - */ -#include -#include - -static __always_inline u32 __get_unaligned_cpu32(const u8 *p) -{ - unsigned long unaligned; - - __asm__ __volatile__ ( - "movua.l @%1, %0\n\t" - : "=z" (unaligned) - : "r" (p) - ); - - return unaligned; -} - -struct __una_u16 { u16 x __attribute__((packed)); }; -struct __una_u32 { u32 x __attribute__((packed)); }; -struct __una_u64 { u64 x __attribute__((packed)); }; - -static inline u16 __get_unaligned_cpu16(const u8 *p) -{ -#ifdef __LITTLE_ENDIAN - return p[0] | p[1] << 8; -#else - return p[0] << 8 | p[1]; -#endif -} - -/* - * Even though movua.l supports auto-increment on the read side, it can - * only store to r0 due to instruction encoding constraints, so just let - * the compiler sort it out on its own. - */ -static inline u64 __get_unaligned_cpu64(const u8 *p) -{ -#ifdef __LITTLE_ENDIAN - return (u64)__get_unaligned_cpu32(p + 4) << 32 | - __get_unaligned_cpu32(p); -#else - return (u64)__get_unaligned_cpu32(p) << 32 | - __get_unaligned_cpu32(p + 4); -#endif -} - -static inline u16 get_unaligned_le16(const void *p) -{ - return le16_to_cpu(__get_unaligned_cpu16(p)); -} - -static inline u32 get_unaligned_le32(const void *p) -{ - return le32_to_cpu(__get_unaligned_cpu32(p)); -} - -static inline u64 get_unaligned_le64(const void *p) -{ - return le64_to_cpu(__get_unaligned_cpu64(p)); -} - -static inline u16 get_unaligned_be16(const void *p) -{ - return be16_to_cpu(__get_unaligned_cpu16(p)); -} - -static inline u32 get_unaligned_be32(const void *p) -{ - return be32_to_cpu(__get_unaligned_cpu32(p)); -} - -static inline u64 get_unaligned_be64(const void *p) -{ - return be64_to_cpu(__get_unaligned_cpu64(p)); -} - -static inline void __put_le16_noalign(u8 *p, u16 val) -{ - *p++ = val; - *p++ = val >> 8; -} - -static inline void __put_le32_noalign(u8 *p, u32 val) -{ - __put_le16_noalign(p, val); - __put_le16_noalign(p + 2, val >> 16); -} - -static inline void __put_le64_noalign(u8 *p, u64 val) -{ - __put_le32_noalign(p, val); - __put_le32_noalign(p + 4, val >> 32); -} - -static inline void __put_be16_noalign(u8 *p, u16 val) -{ - *p++ = val >> 8; - *p++ = val; -} - -static inline void __put_be32_noalign(u8 *p, u32 val) -{ - __put_be16_noalign(p, val >> 16); - __put_be16_noalign(p + 2, val); -} - -static inline void __put_be64_noalign(u8 *p, u64 val) -{ - __put_be32_noalign(p, val >> 32); - __put_be32_noalign(p + 4, val); -} - -static inline void put_unaligned_le16(u16 val, void *p) -{ -#ifdef __LITTLE_ENDIAN - ((struct __una_u16 *)p)->x = val; -#else - __put_le16_noalign(p, val); -#endif -} - -static inline void put_unaligned_le32(u32 val, void *p) -{ -#ifdef __LITTLE_ENDIAN - ((struct __una_u32 *)p)->x = val; -#else - __put_le32_noalign(p, val); -#endif -} - -static inline void put_unaligned_le64(u64 val, void *p) -{ -#ifdef __LITTLE_ENDIAN - ((struct __una_u64 *)p)->x = val; -#else - __put_le64_noalign(p, val); -#endif -} - -static inline void put_unaligned_be16(u16 val, void *p) -{ -#ifdef __BIG_ENDIAN - ((struct __una_u16 *)p)->x = val; -#else - __put_be16_noalign(p, val); -#endif -} - -static inline void put_unaligned_be32(u32 val, void *p) -{ -#ifdef __BIG_ENDIAN - ((struct __una_u32 *)p)->x = val; -#else - __put_be32_noalign(p, val); -#endif -} - -static inline void put_unaligned_be64(u64 val, void *p) -{ -#ifdef __BIG_ENDIAN - ((struct __una_u64 *)p)->x = val; -#else - __put_be64_noalign(p, val); -#endif -} - -/* - * Cause a link-time error if we try an unaligned access other than - * 1,2,4 or 8 bytes long - */ -extern void __bad_unaligned_access_size(void); - -#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({ \ - __builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr), \ - __builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)), \ - __builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)), \ - __builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)), \ - __bad_unaligned_access_size())))); \ - })) - -#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({ \ - __builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr), \ - __builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)), \ - __builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)), \ - __builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)), \ - __bad_unaligned_access_size())))); \ - })) - -#define __put_unaligned_le(val, ptr) ({ \ - void *__gu_p = (ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - *(u8 *)__gu_p = (__force u8)(val); \ - break; \ - case 2: \ - put_unaligned_le16((__force u16)(val), __gu_p); \ - break; \ - case 4: \ - put_unaligned_le32((__force u32)(val), __gu_p); \ - break; \ - case 8: \ - put_unaligned_le64((__force u64)(val), __gu_p); \ - break; \ - default: \ - __bad_unaligned_access_size(); \ - break; \ - } \ - (void)0; }) - -#define __put_unaligned_be(val, ptr) ({ \ - void *__gu_p = (ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - *(u8 *)__gu_p = (__force u8)(val); \ - break; \ - case 2: \ - put_unaligned_be16((__force u16)(val), __gu_p); \ - break; \ - case 4: \ - put_unaligned_be32((__force u32)(val), __gu_p); \ - break; \ - case 8: \ - put_unaligned_be64((__force u64)(val), __gu_p); \ - break; \ - default: \ - __bad_unaligned_access_size(); \ - break; \ - } \ - (void)0; }) - -#ifdef __LITTLE_ENDIAN -# define get_unaligned __get_unaligned_le -# define put_unaligned __put_unaligned_le -#else -# define get_unaligned __get_unaligned_be -# define put_unaligned __put_unaligned_be -#endif - -#endif /* __ASM_SH_UNALIGNED_SH4A_H */ diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h index 06096eeac5..5acf081962 100644 --- a/arch/sh/include/asm/unaligned.h +++ b/arch/sh/include/asm/unaligned.h @@ -3,11 +3,7 @@ /* Copy from linux-kernel. */ -#ifdef CONFIG_CPU_SH4A -/* SH-4A can handle unaligned loads in a relatively neutered fashion. */ -#include -#else -/* Otherwise, SH can't handle unaligned accesses. */ +/* Other than SH4A, SH can't handle unaligned accesses. */ #include #if defined(__BIG_ENDIAN__) #define get_unaligned __get_unaligned_be @@ -20,6 +16,5 @@ #include #include #include -#endif #endif /* _ASM_SH_UNALIGNED_H */ diff --git a/board/renesas/sh7757lcr/Kconfig b/board/renesas/sh7757lcr/Kconfig deleted file mode 100644 index 3fba80ddca..0000000000 --- a/board/renesas/sh7757lcr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7757LCR - -config SYS_BOARD - default "sh7757lcr" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7757lcr" - -endif diff --git a/board/renesas/sh7757lcr/MAINTAINERS b/board/renesas/sh7757lcr/MAINTAINERS deleted file mode 100644 index 20aca678a6..0000000000 --- a/board/renesas/sh7757lcr/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SH7757LCR BOARD -#M: - -S: Maintained -F: board/renesas/sh7757lcr/ -F: include/configs/sh7757lcr.h -F: configs/sh7757lcr_defconfig diff --git a/board/renesas/sh7757lcr/Makefile b/board/renesas/sh7757lcr/Makefile deleted file mode 100644 index ed3be4b6ab..0000000000 --- a/board/renesas/sh7757lcr/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Yoshihiro Shimoda -# - -obj-y := sh7757lcr.o spi-boot.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7757lcr/README.sh7757lcr b/board/renesas/sh7757lcr/README.sh7757lcr deleted file mode 100644 index 9453839d2c..0000000000 --- a/board/renesas/sh7757lcr/README.sh7757lcr +++ /dev/null @@ -1,77 +0,0 @@ -======================================== -Renesas R0P7757LC0030RL board -======================================== - -This board specification: -========================= - -The R0P7757LC0030RL(board config name:sh7757lcr) has the following device: - - - SH7757 (SH-4A) - - DDR3-SDRAM 256MB (with ECC) - - SPI ROM 8MB - - 2D Graphic controller - - Ethernet controller - - eMMC 2GB - - -configuration for This board: -============================= - -You can select the configuration as follows: - - - make sh7757lcr_config - - -This board specific command: -============================ - -This board has the following its specific command: - - - sh_g200 - - write_mac - - -1. sh_g200 - -If we run this command, SH4 can control the G200. -The default setting is that SH4 cannot control the G200. - - -2. write_mac - -You can write MAC address to SPI ROM. - - Usage 1) Write MAC address - - write_mac [ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1] - - For example) - => write_mac 00:00:87:6c:21:80 00:00:87:6c:21:81 00:00:87:6c:21:82 00:00:87:6c:21:83 - *) We have to input the command as a single line - (without carriage return) - *) We have to reset after input the command. - - Usage 2) Show current data - - write_mac - - For example) - => write_mac - ETHERC ch0 = 00:00:87:6c:21:80 - ETHERC ch1 = 00:00:87:6c:21:81 - GETHERC ch0 = 00:00:87:6c:21:82 - GETHERC ch1 = 00:00:87:6c:21:83 - - -Update SPI ROM: -============================ - -1. Copy u-boot image to RAM area. -2. Probe SPI device. - => sf probe 0 - 8192 KiB M25P64 at 0:0 is now current device -3. Erase SPI ROM. - => sf erase 0 80000 -4. Write u-boot image to SPI ROM. - => sf write 0x89000000 0 80000 diff --git a/board/renesas/sh7757lcr/lowlevel_init.S b/board/renesas/sh7757lcr/lowlevel_init.S deleted file mode 100644 index ee288f807f..0000000000 --- a/board/renesas/sh7757lcr/lowlevel_init.S +++ /dev/null @@ -1,544 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Renesas Solutions Corp. - */ - -#include -#include -#include - -.macro or32, addr, data - mov.l \addr, r1 - mov.l \data, r0 - mov.l @r1, r2 - or r2, r0 - mov.l r0, @r1 -.endm - -.macro wait_DBCMD - mov.l DBWAIT_A, r0 - mov.l @r0, r1 -.endm - - .global lowlevel_init - .section .spiboot1.text - .align 2 - -lowlevel_init: - - /*------- GPIO -------*/ - write8 PGDR_A, PGDR_D /* eMMC power off */ - - write16 PACR_A, PACR_D - write16 PBCR_A, PBCR_D - write16 PCCR_A, PCCR_D - write16 PDCR_A, PDCR_D - write16 PECR_A, PECR_D - write16 PFCR_A, PFCR_D - write16 PGCR_A, PGCR_D - write16 PHCR_A, PHCR_D - write16 PICR_A, PICR_D - write16 PJCR_A, PJCR_D - write16 PKCR_A, PKCR_D - write16 PLCR_A, PLCR_D - write16 PMCR_A, PMCR_D - write16 PNCR_A, PNCR_D - write16 POCR_A, POCR_D - write16 PQCR_A, PQCR_D - write16 PRCR_A, PRCR_D - write16 PSCR_A, PSCR_D - write16 PTCR_A, PTCR_D - write16 PUCR_A, PUCR_D - write16 PVCR_A, PVCR_D - write16 PWCR_A, PWCR_D - write16 PXCR_A, PXCR_D - write16 PYCR_A, PYCR_D - write16 PZCR_A, PZCR_D - write16 PSEL0_A, PSEL0_D - write16 PSEL1_A, PSEL1_D - write16 PSEL2_A, PSEL2_D - write16 PSEL3_A, PSEL3_D - write16 PSEL4_A, PSEL4_D - write16 PSEL5_A, PSEL5_D - write16 PSEL6_A, PSEL6_D - write16 PSEL7_A, PSEL7_D - write16 PSEL8_A, PSEL8_D - - bra exit_gpio - nop - - .align 4 - -/*------- GPIO -------*/ -PGDR_A: .long 0xffec0040 -PACR_A: .long 0xffec0000 -PBCR_A: .long 0xffec0002 -PCCR_A: .long 0xffec0004 -PDCR_A: .long 0xffec0006 -PECR_A: .long 0xffec0008 -PFCR_A: .long 0xffec000a -PGCR_A: .long 0xffec000c -PHCR_A: .long 0xffec000e -PICR_A: .long 0xffec0010 -PJCR_A: .long 0xffec0012 -PKCR_A: .long 0xffec0014 -PLCR_A: .long 0xffec0016 -PMCR_A: .long 0xffec0018 -PNCR_A: .long 0xffec001a -POCR_A: .long 0xffec001c -PQCR_A: .long 0xffec0020 -PRCR_A: .long 0xffec0022 -PSCR_A: .long 0xffec0024 -PTCR_A: .long 0xffec0026 -PUCR_A: .long 0xffec0028 -PVCR_A: .long 0xffec002a -PWCR_A: .long 0xffec002c -PXCR_A: .long 0xffec002e -PYCR_A: .long 0xffec0030 -PZCR_A: .long 0xffec0032 -PSEL0_A: .long 0xffec0070 -PSEL1_A: .long 0xffec0072 -PSEL2_A: .long 0xffec0074 -PSEL3_A: .long 0xffec0076 -PSEL4_A: .long 0xffec0078 -PSEL5_A: .long 0xffec007a -PSEL6_A: .long 0xffec007c -PSEL7_A: .long 0xffec0082 -PSEL8_A: .long 0xffec0084 - -PGDR_D: .long 0x80 -PACR_D: .long 0x0000 -PBCR_D: .long 0x0001 -PCCR_D: .long 0x0000 -PDCR_D: .long 0x0000 -PECR_D: .long 0x0000 -PFCR_D: .long 0x0000 -PGCR_D: .long 0x0000 -PHCR_D: .long 0x0000 -PICR_D: .long 0x0000 -PJCR_D: .long 0x0000 -PKCR_D: .long 0x0003 -PLCR_D: .long 0x0000 -PMCR_D: .long 0x0000 -PNCR_D: .long 0x0000 -POCR_D: .long 0x0000 -PQCR_D: .long 0xc000 -PRCR_D: .long 0x0000 -PSCR_D: .long 0x0000 -PTCR_D: .long 0x0000 -#if defined(CONFIG_SH7757_OFFSET_SPI) -PUCR_D: .long 0x0055 -#else -PUCR_D: .long 0x0000 -#endif -PVCR_D: .long 0x0000 -PWCR_D: .long 0x0000 -PXCR_D: .long 0x0000 -PYCR_D: .long 0x0000 -PZCR_D: .long 0x0000 -PSEL0_D: .long 0xfe00 -PSEL1_D: .long 0x0000 -PSEL2_D: .long 0x3000 -PSEL3_D: .long 0xff00 -PSEL4_D: .long 0x771f -PSEL5_D: .long 0x0ffc -PSEL6_D: .long 0x00ff -PSEL7_D: .long 0xfc00 -PSEL8_D: .long 0x0000 - - .align 2 - -exit_gpio: - mov #0, r14 - mova 2f, r0 - mov.l PC_MASK, r1 - tst r0, r1 - bf 2f - - bra exit_pmb - nop - - .align 2 - -/* If CPU runs on SDRAM, PC is 0x8???????. */ -PC_MASK: .long 0x20000000 - -2: - mov #1, r14 - - mov.l EXPEVT_A, r0 - mov.l @r0, r0 - mov.l EXPEVT_POWER_ON_RESET, r1 - cmp/eq r0, r1 - bt 1f - - /* - * If EXPEVT value is manual reset or tlb multipul-hit, - * initialization of DDR3IF is not necessary. - */ - bra exit_ddr - nop - -1: - /* For Core Reset */ - mov.l DBACEN_A, r0 - mov.l @r0, r0 - cmp/eq #0, r0 - bt 3f - - /* - * If DBACEN == 1(DBSC was already enabled), we have to avoid the - * initialization of DDR3-SDRAM. - */ - bra exit_ddr - nop - -3: - /*------- DDR3IF -------*/ - /* oscillation stabilization time */ - wait_timer WAIT_OSC_TIME - - /* step 3 */ - write32 DBCMD_A, DBCMD_RSTL_VAL - wait_timer WAIT_30US - - /* step 4 */ - write32 DBCMD_A, DBCMD_PDEN_VAL - - /* step 5 */ - write32 DBKIND_A, DBKIND_D - - /* step 6 */ - write32 DBCONF_A, DBCONF_D - write32 DBTR0_A, DBTR0_D - write32 DBTR1_A, DBTR1_D - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D - write32 DBTR4_A, DBTR4_D - write32 DBTR5_A, DBTR5_D - write32 DBTR6_A, DBTR6_D - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D - write32 DBTR13_A, DBTR13_D - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D - write32 DBTR17_A, DBTR17_D - write32 DBTR18_A, DBTR18_D - write32 DBTR19_A, DBTR19_D - write32 DBRNK0_A, DBRNK0_D - - /* step 7 */ - write32 DBPDCNT3_A, DBPDCNT3_D - - /* step 8 */ - write32 DBPDCNT1_A, DBPDCNT1_D - write32 DBPDCNT2_A, DBPDCNT2_D - write32 DBPDLCK_A, DBPDLCK_D - write32 DBPDRGA_A, DBPDRGA_D - write32 DBPDRGD_A, DBPDRGD_D - - /* step 9 */ - wait_timer WAIT_30US - - /* step 10 */ - write32 DBPDCNT0_A, DBPDCNT0_D - - /* step 11 */ - wait_timer WAIT_30US - wait_timer WAIT_30US - - /* step 12 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - wait_DBCMD - - /* step 13 */ - write32 DBCMD_A, DBCMD_RSTH_VAL - wait_DBCMD - - /* step 14 */ - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - write32 DBCMD_A, DBCMD_WAIT_VAL - - /* step 15 */ - write32 DBCMD_A, DBCMD_PDXT_VAL - - /* step 16 */ - write32 DBCMD_A, DBCMD_MRS2_VAL - - /* step 17 */ - write32 DBCMD_A, DBCMD_MRS3_VAL - - /* step 18 */ - write32 DBCMD_A, DBCMD_MRS1_VAL - - /* step 19 */ - write32 DBCMD_A, DBCMD_MRS0_VAL - - /* step 20 */ - write32 DBCMD_A, DBCMD_ZQCL_VAL - - write32 DBCMD_A, DBCMD_REF_VAL - write32 DBCMD_A, DBCMD_REF_VAL - wait_DBCMD - - /* step 21 */ - write32 DBADJ0_A, DBADJ0_D - write32 DBADJ1_A, DBADJ1_D - write32 DBADJ2_A, DBADJ2_D - - /* step 22 */ - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D - write32 DBRFCNF2_A, DBRFCNF2_D - - /* step 23 */ - write32 DBCALCNF_A, DBCALCNF_D - - /* step 24 */ - write32 DBRFEN_A, DBRFEN_D - write32 DBCMD_A, DBCMD_SRXT_VAL - - /* step 25 */ - write32 DBACEN_A, DBACEN_D - - /* step 26 */ - wait_DBCMD - -#if defined(CONFIG_SH7757LCR_DDR_ECC) - /* enable DDR-ECC */ - write32 ECD_ECDEN_A, ECD_ECDEN_D - write32 ECD_INTSR_A, ECD_INTSR_D - write32 ECD_SPACER_A, ECD_SPACER_D - write32 ECD_MCR_A, ECD_MCR_D -#endif - bra exit_ddr - nop - - .align 4 - -EXPEVT_A: .long 0xff000024 -EXPEVT_POWER_ON_RESET: .long 0x00000000 - -/*------- DDR3IF -------*/ -DBCMD_A: .long 0xfe800018 -DBKIND_A: .long 0xfe800020 -DBCONF_A: .long 0xfe800024 -DBTR0_A: .long 0xfe800040 -DBTR1_A: .long 0xfe800044 -DBTR2_A: .long 0xfe800048 -DBTR3_A: .long 0xfe800050 -DBTR4_A: .long 0xfe800054 -DBTR5_A: .long 0xfe800058 -DBTR6_A: .long 0xfe80005c -DBTR7_A: .long 0xfe800060 -DBTR8_A: .long 0xfe800064 -DBTR9_A: .long 0xfe800068 -DBTR10_A: .long 0xfe80006c -DBTR11_A: .long 0xfe800070 -DBTR12_A: .long 0xfe800074 -DBTR13_A: .long 0xfe800078 -DBTR14_A: .long 0xfe80007c -DBTR15_A: .long 0xfe800080 -DBTR16_A: .long 0xfe800084 -DBTR17_A: .long 0xfe800088 -DBTR18_A: .long 0xfe80008c -DBTR19_A: .long 0xfe800090 -DBRNK0_A: .long 0xfe800100 -DBPDCNT0_A: .long 0xfe800200 -DBPDCNT1_A: .long 0xfe800204 -DBPDCNT2_A: .long 0xfe800208 -DBPDCNT3_A: .long 0xfe80020c -DBPDLCK_A: .long 0xfe800280 -DBPDRGA_A: .long 0xfe800290 -DBPDRGD_A: .long 0xfe8002a0 -DBADJ0_A: .long 0xfe8000c0 -DBADJ1_A: .long 0xfe8000c4 -DBADJ2_A: .long 0xfe8000c8 -DBRFCNF0_A: .long 0xfe8000e0 -DBRFCNF1_A: .long 0xfe8000e4 -DBRFCNF2_A: .long 0xfe8000e8 -DBCALCNF_A: .long 0xfe8000f4 -DBRFEN_A: .long 0xfe800014 -DBACEN_A: .long 0xfe800010 -DBWAIT_A: .long 0xfe80001c - -WAIT_OSC_TIME: .long 6000 -WAIT_30US: .long 13333 - -DBCMD_RSTL_VAL: .long 0x20000000 -DBCMD_PDEN_VAL: .long 0x1000d73c -DBCMD_WAIT_VAL: .long 0x0000d73c -DBCMD_RSTH_VAL: .long 0x2100d73c -DBCMD_PDXT_VAL: .long 0x110000c8 -DBCMD_MRS0_VAL: .long 0x28000930 -DBCMD_MRS1_VAL: .long 0x29000004 -DBCMD_MRS2_VAL: .long 0x2a000008 -DBCMD_MRS3_VAL: .long 0x2b000000 -DBCMD_ZQCL_VAL: .long 0x03000200 -DBCMD_REF_VAL: .long 0x0c000000 -DBCMD_SRXT_VAL: .long 0x19000000 -DBKIND_D: .long 0x00000007 -DBCONF_D: .long 0x0f030a01 -DBTR0_D: .long 0x00000007 -DBTR1_D: .long 0x00000006 -DBTR2_D: .long 0x00000000 -DBTR3_D: .long 0x00000007 -DBTR4_D: .long 0x00070007 -DBTR5_D: .long 0x0000001b -DBTR6_D: .long 0x00000014 -DBTR7_D: .long 0x00000005 -DBTR8_D: .long 0x00000015 -DBTR9_D: .long 0x00000006 -DBTR10_D: .long 0x00000008 -DBTR11_D: .long 0x00000007 -DBTR12_D: .long 0x0000000e -DBTR13_D: .long 0x00000056 -DBTR14_D: .long 0x00000006 -DBTR15_D: .long 0x00000004 -DBTR16_D: .long 0x00150002 -DBTR17_D: .long 0x000c0017 -DBTR18_D: .long 0x00000200 -DBTR19_D: .long 0x00000040 -DBRNK0_D: .long 0x00000001 -DBPDCNT0_D: .long 0x00000001 -DBPDCNT1_D: .long 0x00000001 -DBPDCNT2_D: .long 0x00000000 -DBPDCNT3_D: .long 0x00004010 -DBPDLCK_D: .long 0x0000a55a -DBPDRGA_D: .long 0x00000028 -DBPDRGD_D: .long 0x00017100 - -DBADJ0_D: .long 0x00000000 -DBADJ1_D: .long 0x00000000 -DBADJ2_D: .long 0x18061806 -DBRFCNF0_D: .long 0x000001ff -DBRFCNF1_D: .long 0x08001000 -DBRFCNF2_D: .long 0x00000000 -DBCALCNF_D: .long 0x0000ffff -DBRFEN_D: .long 0x00000001 -DBACEN_D: .long 0x00000001 - -/*------- DDR-ECC -------*/ -ECD_ECDEN_A: .long 0xffc1012c -ECD_ECDEN_D: .long 0x00000001 -ECD_INTSR_A: .long 0xfe900024 -ECD_INTSR_D: .long 0xffffffff -ECD_SPACER_A: .long 0xfe900018 -ECD_SPACER_D: .long SH7757LCR_SDRAM_ECC_SETTING -ECD_MCR_A: .long 0xfe900010 -ECD_MCR_D: .long 0x00000001 - - .align 2 -exit_ddr: - -#if defined(CONFIG_SH_32BIT) - /*------- set PMB -------*/ - write32 PASCR_A, PASCR_29BIT_D - write32 MMUCR_A, MMUCR_D - - /***************************************************************** - * ent virt phys v sz c wt - * 0 0xa0000000 0x00000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - */ - write32 PMB_ADDR_SPIBOOT_A, PMB_ADDR_SPIBOOT_D - write32 PMB_DATA_SPIBOOT_A, PMB_DATA_SPIBOOT_D - write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D - write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D - write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D - write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D - - write32 PMB_ADDR_ENTRY2, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY3, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY4, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY6, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY7, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY8, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY9, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY10, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY11, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY12, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY13, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY14, PMB_ADDR_NOT_USE_D - write32 PMB_ADDR_ENTRY15, PMB_ADDR_NOT_USE_D - - write32 PASCR_A, PASCR_INIT - mov.l DUMMY_ADDR, r0 - icbi @r0 -#endif /* if defined(CONFIG_SH_32BIT) */ - -exit_pmb: - /* CPU is running on ILRAM? */ - mov r14, r0 - tst #1, r0 - bt 1f - - mov.l _bss_start, r15 - mov.l _spiboot_main, r0 -100: bsrf r0 - nop - - .align 2 -_spiboot_main: .long (spiboot_main - (100b + 4)) -_bss_start: .long bss_start - -1: - - write32 CCR_A, CCR_D - - rts - nop - - .align 4 - -#if defined(CONFIG_SH_32BIT) -/*------- set PMB -------*/ -PMB_ADDR_SPIBOOT_A: .long PMB_ADDR_BASE(0) -PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(1) -PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(5) -PMB_ADDR_ENTRY2: .long PMB_ADDR_BASE(2) -PMB_ADDR_ENTRY3: .long PMB_ADDR_BASE(3) -PMB_ADDR_ENTRY4: .long PMB_ADDR_BASE(4) -PMB_ADDR_ENTRY6: .long PMB_ADDR_BASE(6) -PMB_ADDR_ENTRY7: .long PMB_ADDR_BASE(7) -PMB_ADDR_ENTRY8: .long PMB_ADDR_BASE(8) -PMB_ADDR_ENTRY9: .long PMB_ADDR_BASE(9) -PMB_ADDR_ENTRY10: .long PMB_ADDR_BASE(10) -PMB_ADDR_ENTRY11: .long PMB_ADDR_BASE(11) -PMB_ADDR_ENTRY12: .long PMB_ADDR_BASE(12) -PMB_ADDR_ENTRY13: .long PMB_ADDR_BASE(13) -PMB_ADDR_ENTRY14: .long PMB_ADDR_BASE(14) -PMB_ADDR_ENTRY15: .long PMB_ADDR_BASE(15) - -PMB_ADDR_SPIBOOT_D: .long mk_pmb_addr_val(0xa0) -PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88) -PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8) -PMB_ADDR_NOT_USE_D: .long 0x00000000 - -PMB_DATA_SPIBOOT_A: .long PMB_DATA_BASE(0) -PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(1) -PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(5) - -/* ppn ub v s1 s0 c wt */ -PMB_DATA_SPIBOOT_D: .long mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1) -PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1) - -PASCR_A: .long 0xff000070 -DUMMY_ADDR: .long 0xa0000000 -PASCR_29BIT_D: .long 0x00000000 -PASCR_INIT: .long 0x80000080 -MMUCR_A: .long 0xff000010 -MMUCR_D: .long 0x00000004 /* clear ITLB */ -#endif /* CONFIG_SH_32BIT */ - -CCR_A: .long CCR -CCR_D: .long CCR_CACHE_INIT diff --git a/board/renesas/sh7757lcr/sh7757lcr.c b/board/renesas/sh7757lcr/sh7757lcr.c deleted file mode 100644 index e933e3e730..0000000000 --- a/board/renesas/sh7757lcr/sh7757lcr.c +++ /dev/null @@ -1,433 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011 Renesas Solutions Corp. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int checkboard(void) -{ - puts("BOARD: R0P7757LC0030RL board\n"); - - return 0; -} - -static void init_gctrl(void) -{ - struct gctrl_regs *gctrl = GCTRL_BASE; - unsigned long graofst; - - graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24; - writel(graofst | 0x20000f00, &gctrl->gracr3); -} - -static int init_pcie_bridge_from_spi(void *buf, size_t size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - unsigned long pcie_addr; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe error.\n", __func__); - return 1; - } - - if (is_sh7757_b0()) - pcie_addr = SH7757LCR_PCIEBRG_ADDR_B0; - else - pcie_addr = SH7757LCR_PCIEBRG_ADDR; - - ret = spi_flash_read(spi, pcie_addr, size, buf); - if (ret) { - printf("%s: spi_flash read error.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - return 0; -#else - printf("No SPI support so no PCIe support\n"); - return 1; -#endif -} - -static void init_pcie_bridge(void) -{ - struct pciebrg_regs *pciebrg = PCIEBRG_BASE; - struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE; - int i; - unsigned char *data; - unsigned short tmp; - unsigned long pcie_size; - - if (!(readw(&pciebrg->ctrl_h8s) & 0x0001)) - return; - - if (is_sh7757_b0()) - pcie_size = SH7757LCR_PCIEBRG_SIZE_B0; - else - pcie_size = SH7757LCR_PCIEBRG_SIZE; - - data = malloc(pcie_size); - if (!data) { - printf("%s: malloc error.\n", __func__); - return; - } - if (init_pcie_bridge_from_spi(data, pcie_size)) { - free(data); - return; - } - - if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff && - data[3] == 0xff) { - free(data); - printf("%s: skipped initialization\n", __func__); - return; - } - - writew(0xa501, &pciebrg->ctrl_h8s); /* reset */ - writew(0x0000, &pciebrg->cp_ctrl); - writew(0x0000, &pciebrg->cp_addr); - - for (i = 0; i < pcie_size; i += 2) { - tmp = (data[i] << 8) | data[i + 1]; - writew(tmp, &pciebrg->cp_data); - } - - writew(0xa500, &pciebrg->ctrl_h8s); /* start */ - if (!is_sh7757_b0()) - writel(0x00000001, &pcie_setup->pbictl3); - - free(data); -} - -static void init_usb_phy(void) -{ - struct usb_common_regs *common0 = USB0_COMMON_BASE; - struct usb_common_regs *common1 = USB1_COMMON_BASE; - struct usb0_phy_regs *phy = USB0_PHY_BASE; - struct usb1_port_regs *port = USB1_PORT_BASE; - struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE; - - writew(0x0100, &phy->reset); /* set reset */ - /* port0 = USB0, port1 = USB1 */ - writew(0x0002, &phy->portsel); - writel(0x0001, &port->port1sel); /* port1 = Host */ - writew(0x0111, &phy->reset); /* clear reset */ - - writew(0x4000, &common0->suspmode); - writew(0x4000, &common1->suspmode); - -#if defined(__LITTLE_ENDIAN) - writel(0x00000000, &align->ehcidatac); - writel(0x00000000, &align->ohcidatac); -#endif -} - -static void set_mac_to_sh_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = ETHER0_MAC_BASE; - else - ether = ETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string) -{ - struct ether_mac_regs *ether; - unsigned char mac[6]; - unsigned long val; - - string_to_enetaddr(mac_string, mac); - - if (!channel) - ether = GETHER0_MAC_BASE; - else - ether = GETHER1_MAC_BASE; - - val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3]; - writel(val, ðer->mahr); - val = (mac[4] << 8) | mac[5]; - writel(val, ðer->malr); -} - -/***************************************************************** - * This PMB must be set on this timing. The lowlevel_init is run on - * Area 0(phys 0x00000000), so we have to map it. - * - * The new PMB table is following: - * ent virt phys v sz c wt - * 0 0xa0000000 0x40000000 1 128M 0 1 - * 1 0xa8000000 0x48000000 1 128M 0 1 - * 2 0xb0000000 0x50000000 1 128M 0 1 - * 3 0xb8000000 0x58000000 1 128M 0 1 - * 4 0x80000000 0x40000000 1 128M 1 1 - * 5 0x88000000 0x48000000 1 128M 1 1 - * 6 0x90000000 0x50000000 1 128M 1 1 - * 7 0x98000000 0x58000000 1 128M 1 1 - */ -static void set_pmb_on_board_init(void) -{ - struct mmu_regs *mmu = MMU_BASE; - - /* clear ITLB */ - writel(0x00000004, &mmu->mmucr); - - /* delete PMB for SPIBOOT */ - writel(0, PMB_ADDR_BASE(0)); - writel(0, PMB_DATA_BASE(0)); - - /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ - /* ppn ub v s1 s0 c wt */ - writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0)); - writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0)); - writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2)); - writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2)); - writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3)); - writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3)); - writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4)); - writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4)); - writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6)); - writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6)); - writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7)); - writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7)); -} - -int board_init(void) -{ - struct gether_control_regs *gether = GETHER_CONTROL_BASE; - - set_pmb_on_board_init(); - - /* enable RMII's MDIO (disable GRMII's MDIO) */ - writel(0x00030000, &gether->gbecont); - - init_gctrl(); - init_usb_phy(); - - return 0; -} - -int board_mmc_init(struct bd_info *bis) -{ - return mmcif_mmc_init(); -} - -static int get_sh_eth_mac_raw(unsigned char *buf, int size) -{ -#ifdef CONFIG_DEPRECATED - struct spi_flash *spi; - int ret; - - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (spi == NULL) { - printf("%s: spi_flash probe error.\n", __func__); - return 1; - } - - ret = spi_flash_read(spi, SH7757LCR_ETHERNET_MAC_BASE, size, buf); - if (ret) { - printf("%s: spi_flash read error.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); -#endif - - return 0; -} - -static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf) -{ - memcpy(mac_string, &buf[channel * (SH7757LCR_ETHERNET_MAC_SIZE + 1)], - SH7757LCR_ETHERNET_MAC_SIZE); - mac_string[SH7757LCR_ETHERNET_MAC_SIZE] = 0x00; /* terminate */ - - return 0; -} - -static void init_ethernet_mac(void) -{ - char mac_string[64]; - char env_string[64]; - int i; - unsigned char *buf; - - buf = malloc(256); - if (!buf) { - printf("%s: malloc error.\n", __func__); - return; - } - get_sh_eth_mac_raw(buf, 256); - - /* Fast Ethernet */ - for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i == 0) - env_set("ethaddr", mac_string); - else { - sprintf(env_string, "eth%daddr", i); - env_set(env_string, mac_string); - } - - set_mac_to_sh_eth_register(i, mac_string); - } - - /* Gigabit Ethernet */ - for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) { - get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf); - sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH); - env_set(env_string, mac_string); - - set_mac_to_sh_giga_eth_register(i, mac_string); - } - - free(buf); -} - -static void init_pcie(void) -{ - struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE; - struct pcie_system_bus_regs *pcie_sysbus = PCIE_SYSTEM_BUS_BASE; - - writel(0x00000ff2, &pcie_setup->ladmsk0); - writel(0x00000001, &pcie_setup->barmap); - writel(0xffcaa000, &pcie_setup->lad0); - writel(0x00030000, &pcie_sysbus->endictl0); - writel(0x00000003, &pcie_sysbus->endictl1); - writel(0x00000004, &pcie_setup->pbictl2); -} - -static void finish_spiboot(void) -{ - struct gctrl_regs *gctrl = GCTRL_BASE; - /* - * SH7757 B0 does not use LBSC. - * So if we set SPIBOOTCAN to 1, SH7757 can not access Area0. - * This setting is not cleared by manual reset, So we have to set it - * to 0. - */ - writel(0x00000000, &gctrl->spibootcan); -} - -int board_late_init(void) -{ - init_ethernet_mac(); - init_pcie_bridge(); - init_pcie(); - finish_spiboot(); - - return 0; -} - -int do_sh_g200(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - struct gctrl_regs *gctrl = GCTRL_BASE; - unsigned long graofst; - - writel(0xfedcba98, &gctrl->wprotect); - graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24; - writel(graofst | 0xa0000f00, &gctrl->gracr3); - - return 0; -} - -U_BOOT_CMD( - sh_g200, 1, 1, do_sh_g200, - "enable sh-g200", - "enable SH-G200 bus (disable PCIe-G200)" -); - -#ifdef CONFIG_DEPRECATED -int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - int i, ret; - char mac_string[256]; - struct spi_flash *spi; - unsigned char *buf; - - if (argc != 5) { - buf = malloc(256); - if (!buf) { - printf("%s: malloc error.\n", __func__); - return 1; - } - - get_sh_eth_mac_raw(buf, 256); - - /* print current MAC address */ - for (i = 0; i < 4; i++) { - get_sh_eth_mac(i, mac_string, buf); - if (i < 2) - printf(" ETHERC ch%d = %s\n", i, mac_string); - else - printf("GETHERC ch%d = %s\n", i-2, mac_string); - } - free(buf); - return 0; - } - - /* new setting */ - memset(mac_string, 0xff, sizeof(mac_string)); - sprintf(mac_string, "%s\t%s\t%s\t%s", - argv[1], argv[2], argv[3], argv[4]); - - /* write MAC data to SPI rom */ - spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3); - if (!spi) { - printf("%s: spi_flash probe error.\n", __func__); - return 1; - } - - ret = spi_flash_erase(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI, - SH7757LCR_SPI_SECTOR_SIZE); - if (ret) { - printf("%s: spi_flash erase error.\n", __func__); - return 1; - } - - ret = spi_flash_write(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI, - sizeof(mac_string), mac_string); - if (ret) { - printf("%s: spi_flash write error.\n", __func__); - spi_flash_free(spi); - return 1; - } - spi_flash_free(spi); - - puts("The writing of the MAC address to SPI ROM was completed.\n"); - - return 0; -} - -U_BOOT_CMD( - write_mac, 5, 1, do_write_mac, - "write MAC address for ETHERC/GETHERC", - "[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n" -); -#endif diff --git a/board/renesas/sh7757lcr/spi-boot.c b/board/renesas/sh7757lcr/spi-boot.c deleted file mode 100644 index 71dcf5d445..0000000000 --- a/board/renesas/sh7757lcr/spi-boot.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright (C) 2011 Renesas Solutions Corp. - * - * This file is subject to the terms and conditions of the GNU Lesser - * General Public License. See the file "COPYING.LIB" in the main - * directory of this archive for more details. - */ - -#include - -#define CONFIG_RAM_BOOT_PHYS 0x4ef80000 -#if defined(CONFIG_SH7757_OFFSET_SPI) -#define CONFIG_SPI_ADDR 0x00010000 -#else -#define CONFIG_SPI_ADDR 0x00000000 -#endif -#define CONFIG_SPI_LENGTH 0x00030000 -#define CONFIG_RAM_BOOT 0x8ef80000 - -#define SPIWDMADR 0xFE001018 -#define SPIWDMCNTR 0xFE001020 -#define SPIDMCOR 0xFE001028 -#define SPIDMINTSR 0xFE001188 -#define SPIDMINTMR 0xFE001190 - -#define SPIDMINTSR_DMEND 0x00000004 - -#define TBR 0xFE002000 -#define RBR 0xFE002000 - -#define CR1 0xFE002008 -#define CR2 0xFE002010 -#define CR3 0xFE002018 -#define CR4 0xFE002020 - -/* CR1 */ -#define SPI_TBE 0x80 -#define SPI_TBF 0x40 -#define SPI_RBE 0x20 -#define SPI_RBF 0x10 -#define SPI_PFONRD 0x08 -#define SPI_SSDB 0x04 -#define SPI_SSD 0x02 -#define SPI_SSA 0x01 - -/* CR2 */ -#define SPI_RSTF 0x80 -#define SPI_LOOPBK 0x40 -#define SPI_CPOL 0x20 -#define SPI_CPHA 0x10 -#define SPI_L1M0 0x08 - -/* CR4 */ -#define SPI_TBEI 0x80 -#define SPI_TBFI 0x40 -#define SPI_RBEI 0x20 -#define SPI_RBFI 0x10 -#define SPI_SSS 0x01 - -#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val -#define spi_read(addr) (*(volatile unsigned long *)(addr)) - -/* M25P80 */ -#define M25_READ 0x03 - -#define __uses_spiboot2 __attribute__((section(".spiboot2.text"))) -static void __uses_spiboot2 spi_reset(void) -{ - spi_write(0xfe, CR1); - - spi_write(0, SPIDMCOR); - spi_write(0x00, CR1); - - spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */ - spi_write(spi_read(CR2) & ~SPI_RSTF, CR2); -} - -static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr, - unsigned long len) -{ - spi_write(M25_READ, TBR); - spi_write((addr >> 16) & 0xFF, TBR); - spi_write((addr >> 8) & 0xFF, TBR); - spi_write(addr & 0xFF, TBR); - - spi_write(SPIDMINTSR_DMEND, SPIDMINTSR); - spi_write((unsigned long)buf, SPIWDMADR); - spi_write(len & 0xFFFFFFE0, SPIWDMCNTR); - spi_write(1, SPIDMCOR); - - spi_write(0xff, CR3); - spi_write(spi_read(CR1) | SPI_SSDB, CR1); - spi_write(spi_read(CR1) | SPI_SSA, CR1); - - while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND)) - ; -} - -void __uses_spiboot2 spiboot_main(void) -{ - void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE; - - spi_reset(); - spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, - CONFIG_SPI_LENGTH); - - _start(); -} diff --git a/configs/sh7757lcr_defconfig b/configs/sh7757lcr_defconfig deleted file mode 100644 index 4e5bfea8bb..0000000000 --- a/configs/sh7757lcr_defconfig +++ /dev/null @@ -1,40 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8ef80000 -CONFIG_ENV_SIZE=0x10000 -CONFIG_SH_32BIT=y -CONFIG_TARGET_SH7757LCR=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC2,115200 root=/dev/nfs ip=dhcp" -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -CONFIG_CMD_MD5SUM=y -# CONFIG_CMD_LOADB is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SDRAM=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_SLEEP is not set -CONFIG_CMD_EXT2=y -CONFIG_MAC_PARTITION=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_VERSION_VARIABLE=y -CONFIG_MMC=y -CONFIG_SH_MMCIF=y -CONFIG_BITBANGMII=y -CONFIG_SH_ETHER=y -CONFIG_SCIF_CONSOLE=y -CONFIG_SPI=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index d197dfdc40..520f7f7325 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -18,11 +18,7 @@ #define ADDR_TO_P2(addr) ((((uintptr_t)(addr) & ~0xe0000000) | 0xa0000000)) /* The ethernet controller needs to use physical addresses */ -#if defined(CONFIG_SH_32BIT) -#define ADDR_TO_PHY(addr) ((((uintptr_t)(addr) & ~0xe0000000) | 0x40000000)) -#else #define ADDR_TO_PHY(addr) ((uintptr_t)(addr) & ~0xe0000000) -#endif #elif defined(CONFIG_ARM) #ifndef inl #define inl readl diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h deleted file mode 100644 index 7067ad13bd..0000000000 --- a/include/configs/sh7757lcr.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the sh7757lcr board - * - * Copyright (C) 2011 Renesas Solutions Corp. - */ - -#ifndef __SH7757LCR_H -#define __SH7757LCR_H - -#define CONFIG_CPU_SH7757 1 -#define CONFIG_SH7757LCR_DDR_ECC 1 - -#define CONFIG_DISPLAY_BOARDINFO - -/* MEMORY */ -#define SH7757LCR_SDRAM_BASE (0x80000000) -#define SH7757LCR_SDRAM_SIZE (240 * 1024 * 1024) -#define SH7757LCR_SDRAM_ECC_SETTING 0x0f000000 /* 240MByte */ -#define SH7757LCR_SDRAM_DVC_SIZE (16 * 1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_CONS_SCIF2 1 - -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_SDRAM_BASE (SH7757LCR_SDRAM_BASE) -#define CONFIG_SYS_SDRAM_SIZE (SH7757LCR_SDRAM_SIZE) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 + 16) * 1024 * 1024) - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT 0 -#define CONFIG_SH_ETHER_PHY_ADDR 1 -#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1 -#define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII - -#define SH7757LCR_ETHERNET_MAC_BASE_SPI 0x000b0000 -#define SH7757LCR_SPI_SECTOR_SIZE (64 * 1024) -#define SH7757LCR_ETHERNET_MAC_BASE SH7757LCR_ETHERNET_MAC_BASE_SPI -#define SH7757LCR_ETHERNET_MAC_SIZE 17 -#define SH7757LCR_ETHERNET_NUM_CH 2 - -/* Gigabit Ether */ -#define SH7757LCR_GIGA_ETHERNET_NUM_CH 2 - -/* SPI */ -#define CONFIG_SH_SPI_BASE 0xfe002000 - -/* MMCIF */ -#define CONFIG_SH_MMCIF_ADDR 0xffcb0000 -#define CONFIG_SH_MMCIF_CLK 48000000 - -/* SH7757 board */ -#define SH7757LCR_SDRAM_PHYS_TOP 0x40000000 -#define SH7757LCR_GRA_OFFSET 0x1f000000 -#define SH7757LCR_PCIEBRG_ADDR_B0 0x000a0000 -#define SH7757LCR_PCIEBRG_SIZE_B0 (64 * 1024) -#define SH7757LCR_PCIEBRG_ADDR 0x00090000 -#define SH7757LCR_PCIEBRG_SIZE (96 * 1024) - -/* ENV setting */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netboot=bootp; bootm\0" - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 48000000 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ -#endif /* __SH7757LCR_H */