From: Ashok Reddy Soma Date: Thu, 25 Aug 2022 12:59:03 +0000 (-0600) Subject: spi: zynqmp_gqspi: Add support for IO mode X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.Permalink%20%7D%7D?a=commitdiff_plain;h=d91b0f4a1851f5c7c651c6f6204417035c074a0a;p=u-boot.git spi: zynqmp_gqspi: Add support for IO mode Add support for io-mode transfers. This is necessary for UBIFS to work properly with spi-nor devices. The driver will work in IO mode when "has-io-mode" is passed from device tree instead of DMA. Signed-off-by: Ashok Reddy Soma Link: https://lore.kernel.org/r/20220825125906.11581-4-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek --- diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c index 958432c08d..78a1b48731 100644 --- a/drivers/spi/zynqmp_gqspi.c +++ b/drivers/spi/zynqmp_gqspi.c @@ -166,6 +166,7 @@ struct zynqmp_qspi_plat { struct zynqmp_qspi_dma_regs *dma_regs; u32 frequency; u32 speed_hz; + unsigned int io_mode; }; struct zynqmp_qspi_priv { @@ -174,6 +175,7 @@ struct zynqmp_qspi_priv { const void *tx_buf; void *rx_buf; unsigned int len; + unsigned int io_mode; int bytes_to_transfer; int bytes_to_receive; const struct spi_mem_op *op; @@ -190,6 +192,8 @@ static int zynqmp_qspi_of_to_plat(struct udevice *bus) plat->dma_regs = (struct zynqmp_qspi_dma_regs *) (dev_read_addr(bus) + GQSPI_DMA_REG_OFFSET); + plat->io_mode = dev_read_bool(bus, "has-io-mode"); + return 0; } @@ -209,8 +213,11 @@ static void zynqmp_qspi_init_hw(struct zynqmp_qspi_priv *priv) config_reg = readl(®s->confr); config_reg &= ~(GQSPI_GFIFO_STRT_MODE_MASK | GQSPI_CONFIG_MODE_EN_MASK); - config_reg |= GQSPI_CONFIG_DMA_MODE | GQSPI_GFIFO_WP_HOLD | - GQSPI_DFLT_BAUD_RATE_DIV | GQSPI_GFIFO_STRT_MODE_MASK; + config_reg |= GQSPI_GFIFO_WP_HOLD | GQSPI_DFLT_BAUD_RATE_DIV; + config_reg |= GQSPI_GFIFO_STRT_MODE_MASK; + if (!priv->io_mode) + config_reg |= GQSPI_CONFIG_DMA_MODE; + writel(config_reg, ®s->confr); writel(GQSPI_ENABLE_ENABLE_MASK, ®s->enbr); @@ -388,6 +395,7 @@ static int zynqmp_qspi_probe(struct udevice *bus) priv->regs = plat->regs; priv->dma_regs = plat->dma_regs; + priv->io_mode = plat->io_mode; ret = clk_get_by_index(bus, 0, &clk); if (ret < 0) { @@ -592,6 +600,66 @@ static int zynqmp_qspi_genfifo_fill_tx(struct zynqmp_qspi_priv *priv) return ret; } +static int zynqmp_qspi_start_io(struct zynqmp_qspi_priv *priv, + u32 gen_fifo_cmd, u32 *buf) +{ + u32 len; + u32 actuallen = priv->len; + u32 config_reg, ier, isr; + u32 timeout = GQSPI_TIMEOUT; + struct zynqmp_qspi_regs *regs = priv->regs; + u32 last_bits; + u32 *traverse = buf; + + while (priv->len) { + len = zynqmp_qspi_calc_exp(priv, &gen_fifo_cmd); + /* If exponent bit is set, reset immediate to be 2^len */ + if (gen_fifo_cmd & GQSPI_GFIFO_EXP_MASK) + priv->bytes_to_receive = (1 << len); + else + priv->bytes_to_receive = len; + zynqmp_qspi_fill_gen_fifo(priv, gen_fifo_cmd); + debug("GFIFO_CMD_RX:0x%x\n", gen_fifo_cmd); + /* Manual start */ + config_reg = readl(®s->confr); + config_reg |= GQSPI_STRT_GEN_FIFO; + writel(config_reg, ®s->confr); + /* Enable RX interrupts for IO mode */ + ier = readl(®s->ier); + ier |= GQSPI_IXR_ALL_MASK; + writel(ier, ®s->ier); + while (priv->bytes_to_receive && timeout) { + isr = readl(®s->isr); + if (isr & GQSPI_IXR_RXNEMTY_MASK) { + if (priv->bytes_to_receive >= 4) { + *traverse = readl(®s->drxr); + traverse++; + priv->bytes_to_receive -= 4; + } else { + last_bits = readl(®s->drxr); + memcpy(traverse, &last_bits, + priv->bytes_to_receive); + priv->bytes_to_receive = 0; + } + timeout = GQSPI_TIMEOUT; + } else { + udelay(1); + timeout--; + } + } + + debug("buf:0x%lx, rxbuf:0x%lx, *buf:0x%x len: 0x%x\n", + (unsigned long)buf, (unsigned long)priv->rx_buf, + *buf, actuallen); + if (!timeout) { + printf("IO timeout: %d\n", readl(®s->isr)); + return -1; + } + } + + return 0; +} + static int zynqmp_qspi_start_dma(struct zynqmp_qspi_priv *priv, u32 gen_fifo_cmd, u32 *buf) { @@ -649,10 +717,13 @@ static int zynqmp_qspi_genfifo_fill_rx(struct zynqmp_qspi_priv *priv) * Check if receive buffer is aligned to 4 byte and length * is multiples of four byte as we are using dma to receive. */ - if (!((unsigned long)priv->rx_buf & (GQSPI_DMA_ALIGN - 1)) && - !(actuallen % GQSPI_DMA_ALIGN)) { + if ((!((unsigned long)priv->rx_buf & (GQSPI_DMA_ALIGN - 1)) && + !(actuallen % GQSPI_DMA_ALIGN)) || priv->io_mode) { buf = (u32 *)priv->rx_buf; - return zynqmp_qspi_start_dma(priv, gen_fifo_cmd, buf); + if (priv->io_mode) + return zynqmp_qspi_start_io(priv, gen_fifo_cmd, buf); + else + return zynqmp_qspi_start_dma(priv, gen_fifo_cmd, buf); } ALLOC_CACHE_ALIGN_BUFFER(u8, tmp, roundup(priv->len,