From: Michal Simek Date: Fri, 24 Jun 2022 12:14:59 +0000 (+0200) Subject: microblaze: Switch absolute branches to relative X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.Permalink%20%7D%7D?a=commitdiff_plain;h=7cf236cf1f7d6b6aa2a860a1a80ad99df46b9144;p=u-boot.git microblaze: Switch absolute branches to relative There is no reason to use absolute branches and use just relative. This change helps with moving binary to different location and start it from there. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/83a5103b85c1c2220cd3ab4d5365169c6660e40a.1655299267.git.michal.simek@amd.com --- diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 645f7cb038..9e00eef1f4 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -29,7 +29,7 @@ _start: /* Call board_init_f_alloc_reserve with the current stack pointer as * parameter. */ add r5, r0, r1 - bralid r15, board_init_f_alloc_reserve + brlid r15, board_init_f_alloc_reserve nop /* board_init_f_alloc_reserve returns a pointer to the allocated area @@ -41,20 +41,20 @@ _start: /* Call board_init_f_init_reserve with the address returned by * board_init_f_alloc_reserve as parameter. */ add r5, r0, r3 - bralid r15, board_init_f_init_reserve + brlid r15, board_init_f_init_reserve nop #if !defined(CONFIG_SPL_BUILD) /* Setup vectors with pre-relocation symbols */ or r5, r0, r0 - bralid r15, __setup_exceptions + brlid r15, __setup_exceptions nop #endif /* Flush cache before enable cache */ addik r5, r0, 0 addik r6, r0, XILINX_DCACHE_BYTE_SIZE - bralid r15, flush_cache + brlid r15, flush_cache nop /* enable instruction and data cache */ @@ -75,14 +75,14 @@ clear_bss: bnei r6, 2b 3: /* jumping to board_init */ #ifdef CONFIG_DEBUG_UART - bralid r15, debug_uart_init + brlid r15, debug_uart_init nop #endif #ifndef CONFIG_SPL_BUILD or r5, r0, r0 /* flags - empty */ - brai board_init_f + bri board_init_f #else - brai board_init_r + bri board_init_r #endif 1: bri 1b @@ -289,7 +289,7 @@ relocate_code: /* Setup vectors with post-relocation symbols */ add r5, r0, r23 /* load gd->reloc_off to r5 */ - bralid r15, __setup_exceptions + brlid r15, __setup_exceptions nop /* Check if GOT exist */ @@ -318,7 +318,7 @@ relocate_code: /* Flush caches to ensure consistency */ addik r5, r0, 0 addik r6, r0, XILINX_DCACHE_BYTE_SIZE - bralid r15, flush_cache + brlid r15, flush_cache nop 2: addi r5, r31, 0 /* gd is initialized in board_r.c */