From: Simek, Michal Date: Thu, 18 Apr 2024 08:06:13 +0000 (-1200) Subject: sdhci: zynq: Fix tap delay for SD on Versal NET X-Git-Url: http://git.dujemihanovic.xyz/%7B%7B%20%24style.Permalink%20%7D%7D?a=commitdiff_plain;h=11716acde9a73c24f1d48869ccefcd564044fab0;p=u-boot.git sdhci: zynq: Fix tap delay for SD on Versal NET I can't see any way how tap delays are setup on Versal NET platform because xlnx,versal-8.9a compatible string is also used there but driver is not letting to setup tap delays. Not sure if versal_iclk_phases[] is also valid for Versal NET but the patch is made to investigate it. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/e535cfc1a59b5146a5c9a3ab389dc770de80440c.1713427490.git.michal.simek@amd.com --- diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 898be5a091..8a83adef43 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -865,7 +865,8 @@ static int arasan_sdhci_set_tapdelay(struct sdhci_host *host) ret = sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase); if (ret) return ret; - } else if (IS_ENABLED(CONFIG_ARCH_VERSAL) && + } else if ((IS_ENABLED(CONFIG_ARCH_VERSAL) || + IS_ENABLED(CONFIG_ARCH_VERSAL_NET)) && device_is_compatible(dev, "xlnx,versal-8.9a")) { ret = sdhci_versal_sampleclk_set_phase(host, iclk_phase); if (ret) @@ -941,7 +942,8 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev) } } - if (IS_ENABLED(CONFIG_ARCH_VERSAL) && + if ((IS_ENABLED(CONFIG_ARCH_VERSAL) || + IS_ENABLED(CONFIG_ARCH_VERSAL_NET)) && device_is_compatible(dev, "xlnx,versal-8.9a")) { for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { clk_data->clk_phase_in[i] = versal_iclk_phases[i];