From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 25 May 2016 18:09:35 +0000 (+0200)
Subject: ARM64: zynqmp: Add gpio-keys for zcu102
X-Git-Tag: v2025.01-rc5-pxa1908~8172
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/html/index.html?a=commitdiff_plain;h=e4e7f2f962af2a662a1314a69a58afae6359b66b;p=u-boot.git

ARM64: zynqmp: Add gpio-keys for zcu102

There is gpio push button on MIO22. Add it to DTS to have full board
description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
index d6cee07890..770d98766c 100644
--- a/arch/arm/dts/zynqmp-zcu102.dts
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -12,6 +12,7 @@
 
 #include "zynqmp.dtsi"
 #include "zynqmp-clk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "ZynqMP ZCU102 RevA";
@@ -40,6 +41,20 @@
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		heartbeat_led {