From bd8a9c14c91c61980e1f68ac1e6e1f22632f4c98 Mon Sep 17 00:00:00 2001 From: Adam Ford <aford173@gmail.com> Date: Mon, 11 Jun 2018 19:56:49 -0500 Subject: [PATCH] arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO When CMD_GPIO is enabled the command 'gpio status -a' can cause a hang or reboot if GPIO banks are not enabled, because it scans all banks. This patch enables all GPIO banks so 'gpio status -a' can fully execute. Signed-off-by: Adam Ford <aford173@gmail.com> --- arch/arm/mach-omap2/omap3/clock.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap3/clock.c b/arch/arm/mach-omap2/omap3/clock.c index b9d92c62b1..9a03bfa9d3 100644 --- a/arch/arm/mach-omap2/omap3/clock.c +++ b/arch/arm/mach-omap2/omap3/clock.c @@ -750,23 +750,23 @@ void per_clocks_enable(void) setbits_le32(&prcm_base->iclken_per, 0x00000800); #endif -#ifdef CONFIG_OMAP3_GPIO_2 +#if (CONFIG_IS_ENABLED(OMAP3_GPIO_2) || CONFIG_IS_ENABLED(CMD_GPIO)) setbits_le32(&prcm_base->fclken_per, 0x00002000); setbits_le32(&prcm_base->iclken_per, 0x00002000); #endif -#ifdef CONFIG_OMAP3_GPIO_3 +#if (CONFIG_IS_ENABLED(OMAP3_GPIO_3) || CONFIG_IS_ENABLED(CMD_GPIO)) setbits_le32(&prcm_base->fclken_per, 0x00004000); setbits_le32(&prcm_base->iclken_per, 0x00004000); #endif -#ifdef CONFIG_OMAP3_GPIO_4 +#if (CONFIG_IS_ENABLED(OMAP3_GPIO_4) || CONFIG_IS_ENABLED(CMD_GPIO)) setbits_le32(&prcm_base->fclken_per, 0x00008000); setbits_le32(&prcm_base->iclken_per, 0x00008000); #endif -#ifdef CONFIG_OMAP3_GPIO_5 +#if (CONFIG_IS_ENABLED(OMAP3_GPIO_5) || CONFIG_IS_ENABLED(CMD_GPIO)) setbits_le32(&prcm_base->fclken_per, 0x00010000); setbits_le32(&prcm_base->iclken_per, 0x00010000); #endif -#ifdef CONFIG_OMAP3_GPIO_6 +#if (CONFIG_IS_ENABLED(OMAP3_GPIO_6) || CONFIG_IS_ENABLED(CMD_GPIO)) setbits_le32(&prcm_base->fclken_per, 0x00020000); setbits_le32(&prcm_base->iclken_per, 0x00020000); #endif -- 2.39.5