From bbd94278d15eee93e271c633e15a3b57595563ac Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 18 Aug 2021 23:12:27 -0400 Subject: [PATCH] am335x: Drop non-DM_I2C code On this platform, we have DM_I2C and SPL_DM_I2C always enabled. Remove legacy options. Signed-off-by: Tom Rini --- board/ti/am335x/board.c | 18 ------------------ board/ti/am335x/mux.c | 9 --------- 2 files changed, 27 deletions(-) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 2e4f3d102b..0e209a5a72 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -79,10 +79,6 @@ void do_board_detect(void) { enable_i2c0_pin_mux(); enable_i2c2_pin_mux(); -#if !CONFIG_IS_ENABLED(DM_I2C) - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED2, CONFIG_SYS_OMAP24_I2C_SLAVE2); -#endif if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, CONFIG_EEPROM_CHIP_ADDRESS)) printf("ti_i2c_eeprom_init failed\n"); @@ -339,13 +335,8 @@ static void scale_vcores_bone(int freq) if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4)) return; -#if !CONFIG_IS_ENABLED(DM_I2C) - if (i2c_probe(TPS65217_CHIP_PM)) - return; -#else if (power_tps65217_init(0)) return; -#endif /* @@ -438,13 +429,8 @@ void scale_vcores_generic(int freq) * 1.10V. For MPU voltage we need to switch based on * the frequency we are running at. */ -#if !CONFIG_IS_ENABLED(DM_I2C) - if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) - return; -#else if (power_tps65910_init(0)) return; -#endif /* * Depending on MPU clock and PG we will need a different * VDD to drive at that speed. @@ -472,10 +458,6 @@ void gpi2c_init(void) if (first_time) { enable_i2c0_pin_mux(); -#if !CONFIG_IS_ENABLED(DM_I2C) - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, - CONFIG_SYS_OMAP24_I2C_SLAVE); -#endif first_time = false; } } diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index e450ff64d8..fed737fa09 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -345,14 +345,6 @@ void enable_i2c2_pin_mux(void) static unsigned short detect_daughter_board_profile(void) { unsigned short val; - -#if !CONFIG_IS_ENABLED(DM_I2C) - if (i2c_probe(I2C_CPLD_ADDR)) - return PROFILE_NONE; - - if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2)) - return PROFILE_NONE; -#else struct udevice *dev = NULL; int rc; @@ -362,7 +354,6 @@ static unsigned short detect_daughter_board_profile(void) rc = dm_i2c_read(dev, CFG_REG, (unsigned char *)(&val), 2); if (rc) return PROFILE_NONE; -#endif return (1 << (val & PROFILE_MASK)); } -- 2.39.5