From: Patrice Chotard Date: Tue, 26 Sep 2023 15:09:18 +0000 (+0200) Subject: ARM: dts: stm32mp: alignment with v6.6-rc1 X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=f959118b660ca7545a527179e83f3d4bc38426e1;p=u-boot.git ARM: dts: stm32mp: alignment with v6.6-rc1 Device tree alignment with Linux kernel v6.6.rc1. Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index bd7285053d..215ad9298d 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -33,6 +33,8 @@ optee { method = "smc"; compatible = "linaro,optee-tz"; + interrupt-parent = <&intc>; + interrupts = ; }; scmi: scmi { @@ -50,6 +52,28 @@ reg = <0x16>; #reset-cells = <1>; }; + + scmi_voltd: protocol@17 { + reg = <0x17>; + + scmi_regu: regulators { + #address-cells = <1>; + #size-cells = <0>; + + scmi_reg11: regulator@0 { + reg = ; + regulator-name = "reg11"; + }; + scmi_reg18: regulator@1 { + reg = ; + regulator-name = "reg18"; + }; + scmi_usb33: regulator@2 { + reg = ; + regulator-name = "usb33"; + }; + }; + }; }; }; @@ -76,28 +100,6 @@ always-on; }; - /* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */ - reg11: reg11 { - compatible = "regulator-fixed"; - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - usb33: usb33 { - compatible = "regulator-fixed"; - regulator-name = "usb33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -799,7 +801,7 @@ g-tx-fifo-size = <256 16 16 16 16 16 16 16>; dr_mode = "otg"; otg-rev = <0x200>; - usb33d-supply = <&usb33>; + usb33d-supply = <&scmi_usb33>; status = "disabled"; }; @@ -1337,8 +1339,8 @@ reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; resets = <&rcc USBPHY_R>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; + vdda1v1-supply = <&scmi_reg11>; + vdda1v8-supply = <&scmi_reg18>; status = "disabled"; usbphyc_port0: usb-phy@0 { diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts index f0900ca672..eea740d097 100644 --- a/arch/arm/dts/stm32mp135f-dk.dts +++ b/arch/arm/dts/stm32mp135f-dk.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -65,45 +66,13 @@ default-state = "off"; }; }; - - v3v3_sw: v3v3-sw { - compatible = "regulator-fixed"; - regulator-name = "v3v3_sw"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_adc: vdd-adc { - compatible = "regulator-fixed"; - regulator-name = "vdd_adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd: vdd-sd { - compatible = "regulator-fixed"; - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - - vdd_usb: vdd-usb { - compatible = "regulator-fixed"; - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; }; &adc_1 { pinctrl-names = "default"; pinctrl-0 = <&adc1_usb_cc_pins_a>; - vdda-supply = <&vdd_adc>; - vref-supply = <&vdd_adc>; + vdda-supply = <&scmi_vdd_adc>; + vref-supply = <&scmi_vdd_adc>; status = "okay"; adc1: adc@0 { status = "okay"; @@ -195,6 +164,29 @@ status = "okay"; }; +&scmi_regu { + scmi_vdd_adc: regulator@10 { + reg = ; + regulator-name = "vdd_adc"; + }; + scmi_vdd_usb: regulator@13 { + reg = ; + regulator-name = "vdd_usb"; + }; + scmi_vdd_sd: regulator@14 { + reg = ; + regulator-name = "vdd_sd"; + }; + scmi_v1v8_periph: regulator@15 { + reg = ; + regulator-name = "v1v8_periph"; + }; + scmi_v3v3_sw: regulator@19 { + reg = ; + regulator-name = "v3v3_sw"; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; @@ -204,7 +196,7 @@ disable-wp; st,neg-edge; bus-width = <4>; - vmmc-supply = <&vdd_sd>; + vmmc-supply = <&scmi_vdd_sd>; status = "okay"; }; @@ -321,7 +313,7 @@ hub@1 { compatible = "usb424,2514"; reg = <1>; - vdd-supply = <&v3v3_sw>; + vdd-supply = <&scmi_v3v3_sw>; }; }; @@ -342,7 +334,7 @@ }; &usbphyc_port0 { - phy-supply = <&vdd_usb>; + phy-supply = <&scmi_vdd_usb>; st,current-boost-microamp = <1000>; st,decrease-hs-slew-rate; st,tune-hs-dc-level = <2>; @@ -356,7 +348,7 @@ }; &usbphyc_port1 { - phy-supply = <&vdd_usb>; + phy-supply = <&scmi_vdd_usb>; st,current-boost-microamp = <1000>; st,decrease-hs-slew-rate; st,tune-hs-dc-level = <2>; diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index e86d989dd3..098153ee99 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -6,6 +6,17 @@ #include &pinctrl { + adc1_ain_pins_a: adc1-ain-0 { + pins { + pinmux = , /* ADC1_INP2 */ + , /* ADC1_INP5 */ + , /* ADC1_INP9 */ + , /* ADC1_INP10 */ + , /* ADC1_INP13 */ + ; /* ADC1_INP15 */ + }; + }; + adc1_in6_pins_a: adc1-in6-0 { pins { pinmux = ; @@ -341,6 +352,96 @@ }; }; + ethernet0_rgmii_pins_d: rgmii-3 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_d: rgmii-sleep-3 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + + ethernet0_rgmii_pins_e: rgmii-4 { + pins1 { + pinmux = , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + ; /* ETH_RGMII_TX_CTL */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_e: rgmii-sleep-4 { + pins1 { + pinmux = , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + ethernet0_rmii_pins_a: rmii-0 { pins1 { pinmux = , /* ETH1_RMII_TXD0 */ @@ -1104,6 +1205,20 @@ }; }; + pwm1_pins_c: pwm1-2 { + pins { + pinmux = ; /* TIM1_CH2 */ + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_c: pwm1-sleep-2 { + pins { + pinmux = ; /* TIM1_CH2 */ + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = ; /* TIM2_CH4 */ @@ -1230,6 +1345,26 @@ }; }; + pwm8_pins_b: pwm8-1 { + pins { + pinmux = , /* TIM8_CH1 */ + , /* TIM8_CH2 */ + , /* TIM8_CH3 */ + ; /* TIM8_CH4 */ + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_b: pwm8-sleep-1 { + pins { + pinmux = , /* TIM8_CH1 */ + , /* TIM8_CH2 */ + , /* TIM8_CH3 */ + ; /* TIM8_CH4 */ + }; + }; + pwm12_pins_a: pwm12-0 { pins { pinmux = ; /* TIM12_CH1 */ @@ -1441,6 +1576,30 @@ }; }; + sai2b_pins_d: sai2b-3 { + pins1 { + pinmux = , /* SAI2_SCK_B */ + , /* SAI2_FS_B */ + ; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_d: sai2b-sleep-3 { + pins1 { + pinmux = , /* SAI2_SCK_B */ + , /* SAI2_FS_B */ + , /* SAI2_MCLK_B */ + ; /* SAI2_SD_B */ + }; + }; + sai4a_pins_a: sai4a-0 { pins { pinmux = ; /* SAI4_SD_A */ @@ -1522,6 +1681,60 @@ }; }; + sdmmc1_b4_pins_b: sdmmc1-b4-1 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_b: sdmmc1-b4-od-1 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + ; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_b: sdmmc1-b4-sleep-1 { + pins { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + , /* SDMMC1_CK */ + ; /* SDMMC1_CMD */ + }; + }; + sdmmc1_dir_pins_a: sdmmc1-dir-0 { pins1 { pinmux = , /* SDMMC1_D0DIR */ @@ -1531,7 +1744,7 @@ drive-push-pull; bias-pull-up; }; - pins2{ + pins2 { pinmux = ; /* SDMMC1_CKIN */ bias-pull-up; }; @@ -1566,7 +1779,7 @@ drive-push-pull; bias-pull-up; }; - pins2{ + pins2 { pinmux = ; /* SDMMC1_CKIN */ bias-pull-up; }; @@ -1759,6 +1972,27 @@ }; }; + sdmmc2_d47_pins_e: sdmmc2-d47-4 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_e: sdmmc2-d47-sleep-4 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = , /* SDMMC3_D0 */ @@ -1925,6 +2159,20 @@ }; }; + spi2_pins_c: spi2-2 { + pins1 { + pinmux = , /* SPI2_SCK */ + ; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + }; + + pins2 { + pinmux = ; /* SPI2_MISO */ + bias-pull-down; + }; + }; + spi4_pins_a: spi4-0 { pins { pinmux = , /* SPI4_SCK */ @@ -1939,6 +2187,21 @@ }; }; + spi5_pins_a: spi5-0 { + pins1 { + pinmux = , /* SPI5_SCK */ + ; /* SPI5_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI5_MISO */ + bias-disable; + }; + }; + stusb1600_pins_a: stusb1600-0 { pins { pinmux = ; @@ -2124,6 +2387,33 @@ }; }; + usart1_pins_a: usart1-0 { + pins1 { + pinmux = ; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* USART1_CTS_NSS */ + bias-disable; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = , /* USART1_RTS */ + ; /* USART1_CTS_NSS */ + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = , /* USART1_RTS */ + ; /* USART1_CTS_NSS */ + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = , /* USART2_TX */ @@ -2226,6 +2516,23 @@ }; }; + usart3_idle_pins_a: usart3-idle-0 { + pins1 { + pinmux = ; /* USART3_TX */ + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_a: usart3-sleep-0 { + pins { + pinmux = , /* USART3_TX */ + ; /* USART3_RX */ + }; + }; + usart3_pins_b: usart3-1 { pins1 { pinmux = , /* USART3_TX */ @@ -2385,6 +2692,21 @@ }; }; + usart3_pins_f: usart3-5 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = ; /* OTG_ID */ @@ -2463,4 +2785,42 @@ bias-disable; }; }; + + spi1_sleep_pins_a: spi1-sleep-0 { + pins { + pinmux = , /* SPI1_SCK */ + , /* SPI1_MISO */ + ; /* SPI1_MOSI */ + }; + }; + + usart1_pins_b: usart1-1 { + pins1 { + pinmux = ; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_idle_pins_b: usart1-idle-1 { + pins1 { + pinmux = ; /* USART1_TX */ + }; + pins2 { + pinmux = ; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_sleep_pins_b: usart1-sleep-1 { + pins { + pinmux = , /* USART1_TX */ + ; /* USART1_RX */ + }; + }; }; diff --git a/arch/arm/dts/stm32mp15-scmi.dtsi b/arch/arm/dts/stm32mp15-scmi.dtsi index ad2584213d..dc3b09f2f2 100644 --- a/arch/arm/dts/stm32mp15-scmi.dtsi +++ b/arch/arm/dts/stm32mp15-scmi.dtsi @@ -34,22 +34,21 @@ #address-cells = <1>; #size-cells = <0>; - scmi_reg11: reg11@0 { + scmi_reg11: regulator@0 { reg = <0>; regulator-name = "reg11"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - scmi_reg18: reg18@1 { - voltd-name = "reg18"; + scmi_reg18: regulator@1 { reg = <1>; regulator-name = "reg18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - scmi_usb33: usb33@2 { + scmi_usb33: regulator@2 { reg = <2>; regulator-name = "usb33"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index 21d11be328..e277140d36 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -1111,6 +1111,8 @@ adc1: adc@0 { compatible = "st,stm32mp1-adc"; #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x0>; interrupt-parent = <&adc>; interrupts = <0>; @@ -1122,12 +1124,24 @@ adc2: adc@100 { compatible = "st,stm32mp1-adc"; #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x100>; interrupt-parent = <&adc>; interrupts = <1>; dmas = <&dmamux1 10 0x400 0x01>; dma-names = "rx"; + nvmem-cells = <&vrefint>; + nvmem-cell-names = "vrefint"; status = "disabled"; + channel@13 { + reg = <13>; + label = "vrefint"; + }; + channel@14 { + reg = <14>; + label = "vddcore"; + }; }; }; @@ -1162,14 +1176,6 @@ status = "disabled"; }; - hwspinlock: hwspinlock@4c000000 { - compatible = "st,stm32-hwspinlock"; - #hwlock-cells = <1>; - reg = <0x4c000000 0x400>; - clocks = <&rcc HSEM>; - clock-names = "hwspinlock"; - }; - ipcc: mailbox@4c001000 { compatible = "st,stm32mp1-ipcc"; #mbox-cells = <1>; @@ -1559,11 +1565,6 @@ clock-names = "lcd"; resets = <&rcc LTDC_R>; status = "disabled"; - - port { - #address-cells = <1>; - #size-cells = <0>; - }; }; iwdg2: watchdog@5a002000 { @@ -1650,9 +1651,12 @@ reg = <0x5c005000 0x400>; #address-cells = <1>; #size-cells = <1>; - part_number_otp: part_number_otp@4 { + part_number_otp: part-number-otp@4 { reg = <0x4 0x1>; }; + vrefint: vrefin-cal@52 { + reg = <0x52 0x2>; + }; ts_cal1: calib@5c { reg = <0x5c 0x2>; }; @@ -1853,8 +1857,8 @@ <0x30000000 0x40000>, <0x38000000 0x10000>; resets = <&rcc MCU_R>; + reset-names = "mcu_rst"; st,syscfg-holdboot = <&rcc 0x10C 0x1>; - st,syscfg-tz = <&rcc 0x000 0x1>; st,syscfg-pdds = <&pwr_mcu 0x0 0x1>; st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>; st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>; diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi index 54e73ccea4..6197d87889 100644 --- a/arch/arm/dts/stm32mp157.dtsi +++ b/arch/arm/dts/stm32mp157.dtsi @@ -22,15 +22,26 @@ reg = <0x5a000000 0x800>; clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; clock-names = "pclk", "ref", "px_clk"; + phy-dsi-supply = <®18>; resets = <&rcc DSI_R>; reset-names = "apb"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + }; + }; }; }; }; diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/dts/stm32mp157a-dk1-scmi.dts index e539cc80be..afcd628589 100644 --- a/arch/arm/dts/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/dts/stm32mp157a-dk1-scmi.dts @@ -55,8 +55,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts index fae656edd8..f4a4942985 100644 --- a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts +++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -81,6 +81,9 @@ status = "okay"; port { + #address-cells = <1>; + #size-cells = <0>; + ltdc_ep0_out: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in>; diff --git a/arch/arm/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/dts/stm32mp157c-dk2-scmi.dts index 97e4f94b0a..39358d9020 100644 --- a/arch/arm/dts/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/dts/stm32mp157c-dk2-scmi.dts @@ -61,8 +61,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts index ab13e340f4..510cca5acb 100644 --- a/arch/arm/dts/stm32mp157c-dk2.dts +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -31,24 +31,9 @@ }; &dsi { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; - phy-dsi-supply = <®18>; - - ports { - port@0 { - reg = <0>; - dsi_in: endpoint { - remote-endpoint = <<dc_ep1_out>; - }; - }; - - port@1 { - reg = <1>; - dsi_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; panel@0 { compatible = "orisetech,otm8009a"; @@ -65,6 +50,14 @@ }; }; +&dsi_in { + remote-endpoint = <<dc_ep1_out>; +}; + +&dsi_out { + remote-endpoint = <&panel_in>; +}; + &i2c1 { touchscreen@38 { compatible = "focaltech,ft6236"; @@ -82,6 +75,9 @@ status = "okay"; port { + #address-cells = <1>; + #size-cells = <0>; + ltdc_ep1_out: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in>; diff --git a/arch/arm/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/dts/stm32mp157c-ed1-scmi.dts index 9cf0a44d2f..07ea765a45 100644 --- a/arch/arm/dts/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/dts/stm32mp157c-ed1-scmi.dts @@ -60,8 +60,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 3541a17dce..66ed5f9921 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -103,21 +103,23 @@ vref-supply = <&vdda>; status = "disabled"; adc1: adc@0 { - st,adc-channels = <0 1 6>; - /* 16.5 ck_cycles sampling time */ - st,min-sample-time-nsecs = <400>; status = "okay"; + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <400>; + }; + channel@1 { + reg = <1>; + st,min-sample-time-ns = <400>; + }; + channel@6 { + reg = <6>; + st,min-sample-time-ns = <400>; + }; }; }; -&cpu0{ - cpu-supply = <&vddcore>; -}; - -&cpu1{ - cpu-supply = <&vddcore>; -}; - &crc1 { status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/dts/stm32mp157c-ev1-scmi.dts index 3b9dd6f4cc..813086ec24 100644 --- a/arch/arm/dts/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/dts/stm32mp157c-ev1-scmi.dts @@ -66,8 +66,11 @@ resets = <&scmi_reset RST_SCMI_MDMA>; }; -&mlahb { - resets = <&scmi_reset RST_SCMI_MCU>; +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index ba8e9d9a42..cd9c3ff537 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -100,26 +100,11 @@ }; &dsi { - phy-dsi-supply = <®18>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; - ports { - port@0 { - reg = <0>; - dsi_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - - port@1 { - reg = <1>; - dsi_out: endpoint { - remote-endpoint = <&dsi_panel_in>; - }; - }; - }; - - panel-dsi@0 { + panel@0 { compatible = "raydium,rm68200"; reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; @@ -135,6 +120,14 @@ }; }; +&dsi_in { + remote-endpoint = <<dc_ep0_out>; +}; + +&dsi_out { + remote-endpoint = <&dsi_panel_in>; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; @@ -185,7 +178,9 @@ reg = <0x3c>; clocks = <&clk_ext_camera>; clock-names = "xclk"; + AVDD-supply = <&v2v8>; DOVDD-supply = <&v2v8>; + DVDD-supply = <&v2v8>; powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; @@ -239,8 +234,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&dsi_in>; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index f4de6c0b75..511113f2e3 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -93,28 +93,39 @@ &adc { pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + pinctrl-0 = <&adc12_usb_cc_pins_a>; vdd-supply = <&vdd>; vdda-supply = <&vdd>; vref-supply = <&vrefbuf>; - status = "disabled"; + status = "okay"; adc1: adc@0 { + status = "okay"; /* * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: * 5 * (56 + 47kOhms) * 5pF => 2.5us. * Use arbitrary margin here (e.g. 5us). */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + }; + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + }; }; adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; status = "okay"; + /* USB Type-C CC1 & CC2 */ + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + }; + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + }; }; }; @@ -133,14 +144,6 @@ status = "okay"; }; -&cpu0{ - cpu-supply = <&vddcore>; -}; - -&cpu1{ - cpu-supply = <&vddcore>; -}; - ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; @@ -443,7 +446,7 @@ i2s2_port: port { i2s2_endpoint: endpoint { remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; }; }; @@ -465,8 +468,7 @@ status = "okay"; port { - ltdc_ep0_out: endpoint@0 { - reg = <0>; + ltdc_ep0_out: endpoint { remote-endpoint = <&sii9022_in>; }; }; diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h index 25e8cfd434..0a5324bcdb 100644 --- a/include/dt-bindings/clock/stm32mp1-clks.h +++ b/include/dt-bindings/clock/stm32mp1-clks.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics. diff --git a/include/dt-bindings/clock/stm32mp13-clks.h b/include/dt-bindings/clock/stm32mp13-clks.h index da4cb75674..0bd7b54c65 100644 --- a/include/dt-bindings/clock/stm32mp13-clks.h +++ b/include/dt-bindings/clock/stm32mp13-clks.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later or BSD-3-Clause */ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */ /* * Copyright (C) STMicroelectronics 2020 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics. diff --git a/include/dt-bindings/regulator/st,stm32mp13-regulator.h b/include/dt-bindings/regulator/st,stm32mp13-regulator.h new file mode 100644 index 0000000000..b3a974dfc5 --- /dev/null +++ b/include/dt-bindings/regulator/st,stm32mp13-regulator.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ +/* + * Copyright (C) 2022, STMicroelectronics - All Rights Reserved + */ + +#ifndef __DT_BINDINGS_REGULATOR_ST_STM32MP13_REGULATOR_H +#define __DT_BINDINGS_REGULATOR_ST_STM32MP13_REGULATOR_H + +/* SCMI voltage domains identifiers */ + +/* SOC Internal regulators */ +#define VOLTD_SCMI_REG11 0 +#define VOLTD_SCMI_REG18 1 +#define VOLTD_SCMI_USB33 2 +#define VOLTD_SCMI_SDMMC1_IO 3 +#define VOLTD_SCMI_SDMMC2_IO 4 +#define VOLTD_SCMI_VREFBUF 5 + +/* STPMIC1 regulators */ +#define VOLTD_SCMI_STPMIC1_BUCK1 6 +#define VOLTD_SCMI_STPMIC1_BUCK2 7 +#define VOLTD_SCMI_STPMIC1_BUCK3 8 +#define VOLTD_SCMI_STPMIC1_BUCK4 9 +#define VOLTD_SCMI_STPMIC1_LDO1 10 +#define VOLTD_SCMI_STPMIC1_LDO2 11 +#define VOLTD_SCMI_STPMIC1_LDO3 12 +#define VOLTD_SCMI_STPMIC1_LDO4 13 +#define VOLTD_SCMI_STPMIC1_LDO5 14 +#define VOLTD_SCMI_STPMIC1_LDO6 15 +#define VOLTD_SCMI_STPMIC1_VREFDDR 16 +#define VOLTD_SCMI_STPMIC1_BOOST 17 +#define VOLTD_SCMI_STPMIC1_PWR_SW1 18 +#define VOLTD_SCMI_STPMIC1_PWR_SW2 19 + +/* External regulators */ +#define VOLTD_SCMI_REGU0 20 +#define VOLTD_SCMI_REGU1 21 +#define VOLTD_SCMI_REGU2 22 +#define VOLTD_SCMI_REGU3 23 +#define VOLTD_SCMI_REGU4 24 + +#endif /*__DT_BINDINGS_REGULATOR_ST_STM32MP13_REGULATOR_H */ diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h index 4ffa7c3612..9071f13964 100644 --- a/include/dt-bindings/reset/stm32mp1-resets.h +++ b/include/dt-bindings/reset/stm32mp1-resets.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics. diff --git a/include/dt-bindings/reset/stm32mp13-resets.h b/include/dt-bindings/reset/stm32mp13-resets.h index 1b83a01de8..ecb37c7ddd 100644 --- a/include/dt-bindings/reset/stm32mp13-resets.h +++ b/include/dt-bindings/reset/stm32mp13-resets.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later or BSD-3-Clause */ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */ /* * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Gabriel Fernandez for STMicroelectronics.