From: Xavier Drudis Ferran Date: Mon, 5 Jun 2023 15:05:53 +0000 (+0200) Subject: phy: rockchip-inno-usb2: Add usb2phy clock provider of 480MHz clock X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=e81512ac30c154c320b54036919cd3a6f4cc1516;p=u-boot.git phy: rockchip-inno-usb2: Add usb2phy clock provider of 480MHz clock arch/arm/dts/rk3399.dtsi has a node usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; with clocks: clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, <&u2phy0>; The first 2 refer to nodes with class UCLASS_CLK, but &u2phy0 has class UCLASS_PHY. u2phy0: usb2phy@e450 { compatible = "rockchip,rk3399-usb2phy"; Since clk_get_bulk() only looks for devices with UCLASS_CLK, it fails with -ENODEV and then ehci_usb_probe() aborts. The consequence is peripherals connected to a USB 2 port (e.g. in a Rock Pi 4 the white port, nearer the edge) not being detected. They're detected if CONFIG_USB_OHCI_GENERIC is selected in Kconfig, because ohci_usb_probe() does not abort when one clk_get_by_index() fails, but then they work in USB 1 mode. rk3399.dtsi comes from linux and the u2phy0 was added[1] to the clock list in: commit b5d1c57299734f5b54035ef2e61706b83041f20c Author: William wu Date: Wed Dec 21 18:41:05 2016 +0800 arm64: dts: rockchip: add u2phy clock for ehci and ohci of rk3399 We found that the suspend process was blocked when it run into ehci/ohci module due to clk-480m of usb2-phy was disabled. [...] Suspend concerns don't apply to U-Boot, and the problem with U-Boot failing to probe EHCI doesn't apply to linux, because in linux rockchip_usb2phy_clk480m_register makes u2phy0 a proper clock provider when called by rockchip_usb2phy_probe(). So I can think of a few alternative solutions: 1- Change ehci_usb_probe() to make it more similar to ohci_usb_probe(), and survive failure to get one clock. Looks a little harder, and I don't know whether it could break something if it ignored a clock that was important for something else than suspend. 2- Change rk3399.dtsi effectively reverting the linux commit b5d1c57299734f5b54035ef2e61706b83041f20c. This dealigns the .dtsi from linux and seems fragile at the next synchronisation. 3- Change the clock list in rk3399-u-boot.dtsi or somewhere else. This survives .dts* sync but may survive "too much" and miss some change from linux that we might want. 4- Enable CONFIG_USB_OHCI_GENERIC and use the ports in USB 1 mode. This would need to be made for all boards using rk3399. In a simple test reading one file from USB storage it gave 769.5 KiB/s instead of 20.5 MiB/s with solution 2. 5- Trying to replicate linux and have usb2phy somehow provide a clk, or have a separate clock device for usb2phy in addition to the phy device. This patch tries to implement option 5 as Marek Vasut requested in December 5th. Options 1 and 3 didn't get through [2][3]. It just registers usb2phy as a clock driver (device_bind_driver() didn't work but device_bind_driver_to_node() did), without any specific operations, so that ehci-generic.c finds it and is happy. It worked in my tests on a Rock Pi 4 B+ (rk3399). Link: [1] https://lkml.kernel.org/lkml/1731551.Q6cHK6n5ZM@phil/T/ [2] https://patchwork.ozlabs.org/project/uboot/patch/20220701185959.GC1700@begut/ [3] https://patchwork.ozlabs.org/project/uboot/patch/Y44+ayJfUlI08ptM@localhost/ Cc: Simon Glass Cc: Philipp Tomsich Cc: Kever Yang Cc: Lukasz Majewski Cc: Sean Anderson Cc: Marek Vasut Cc: Christoph Fritz Cc: Jagan Teki Signed-off-by: Xavier Drudis Ferran Reviewed-by: Kever Yang Reviewed-by: Jagan Teki Tested-by: Jagan Teki # rk3399, rk3328, rv1126 --- diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index 22e2797eea..32145afac1 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -7,10 +7,11 @@ */ #include -#include +#include #include #include #include +#include #include #include #include @@ -168,6 +169,9 @@ static struct phy_ops rockchip_usb2phy_ops = { .of_xlate = rockchip_usb2phy_of_xlate, }; +static struct clk_ops rockchip_usb2phy_clk_ops = { +}; + static int rockchip_usb2phy_probe(struct udevice *dev) { struct rockchip_usb2phy *priv = dev_get_priv(dev); @@ -234,7 +238,8 @@ static int rockchip_usb2phy_bind(struct udevice *dev) dev_for_each_subnode(node, dev) { if (!ofnode_valid(node)) { dev_info(dev, "subnode %s not found\n", dev->name); - return -ENXIO; + ret = -ENXIO; + goto bind_fail; } name = ofnode_get_name(node); @@ -245,10 +250,26 @@ static int rockchip_usb2phy_bind(struct udevice *dev) if (ret) { dev_err(dev, "'%s' cannot bind 'rockchip_usb2phy_port'\n", name); - return ret; + goto bind_fail; } } + node = dev_ofnode(dev); + name = ofnode_get_name(node); + dev_dbg(dev, "clk for node %s\n", name); + ret = device_bind_driver_to_node(dev, "rockchip_usb2phy_clock", + name, node, &usb2phy_dev); + if (ret) { + dev_err(dev, + "'%s' cannot bind 'rockchip_usb2phy_clock'\n", name); + goto bind_fail; + } + + return 0; + +bind_fail: + device_chld_unbind(dev, NULL); + return ret; } @@ -422,6 +443,12 @@ U_BOOT_DRIVER(rockchip_usb2phy_port) = { .ops = &rockchip_usb2phy_ops, }; +U_BOOT_DRIVER(rockchip_usb2phy_clock) = { + .name = "rockchip_usb2phy_clock", + .id = UCLASS_CLK, + .ops = &rockchip_usb2phy_clk_ops, +}; + U_BOOT_DRIVER(rockchip_usb2phy) = { .name = "rockchip_usb2phy", .id = UCLASS_PHY,