From: Andrew F. Davis <afd@ti.com>
Date: Mon, 10 Jul 2017 19:45:52 +0000 (-0500)
Subject: arm: mach-omap2: am33xx: Add FDT fixup suport for AM33xx/AM43xx boards
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=ddf013458dd2fa2f269fc03336d617a5c87987b9;p=u-boot.git

arm: mach-omap2: am33xx: Add FDT fixup suport for AM33xx/AM43xx boards

Similar to what is done with OMAP5 class boards we need to
perform fixups common to this SoC class, add support for this here
and add HS fixups.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---

diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile
index b2f8158e73..9d4f83cb75 100644
--- a/arch/arm/mach-omap2/am33xx/Makefile
+++ b/arch/arm/mach-omap2/am33xx/Makefile
@@ -23,6 +23,7 @@ obj-y	+= board.o
 obj-y	+= mux.o
 obj-y	+= prcm-regs.o
 obj-y	+= hw_data.o
+obj-y	+= fdt.o
 
 obj-$(CONFIG_CLOCK_SYNTHESIZER)	+= clk_synthesizer.o
 
diff --git a/arch/arm/mach-omap2/am33xx/fdt.c b/arch/arm/mach-omap2/am33xx/fdt.c
new file mode 100644
index 0000000000..02e8243800
--- /dev/null
+++ b/arch/arm/mach-omap2/am33xx/fdt.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2017 Texas Instruments, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <malloc.h>
+
+#include <asm/omap_common.h>
+#include <asm/arch-am33xx/sys_proto.h>
+
+#ifdef CONFIG_TI_SECURE_DEVICE
+
+static void ft_hs_fixups(void *fdt, bd_t *bd)
+{
+	/* Check we are running on an HS/EMU device type */
+	if (GP_DEVICE != get_device_type()) {
+		if ((ft_hs_disable_rng(fdt, bd) == 0) &&
+		    (ft_hs_fixup_dram(fdt, bd) == 0) &&
+		    (ft_hs_add_tee(fdt, bd) == 0))
+			return;
+	} else {
+		printf("ERROR: Incorrect device type (GP) detected!");
+	}
+	/* Fixup failed or wrong device type */
+	hang();
+}
+#else
+static void ft_hs_fixups(void *fdt, bd_t *bd) { }
+#endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
+
+/*
+ * Place for general cpu/SoC FDT fixups. Board specific
+ * fixups should remain in the board files which is where
+ * this function should be called from.
+ */
+void ft_cpu_setup(void *fdt, bd_t *bd)
+{
+	ft_hs_fixups(fdt, bd);
+}