From: Adam Ford Date: Tue, 30 Apr 2019 12:53:16 +0000 (-0500) Subject: ARM: dts: logicpd-som-lv: Fix MMC1 card detect X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=d66f4fe982719c883e65035a3beb8dc89ea045c8;p=u-boot.git ARM: dts: logicpd-som-lv: Fix MMC1 card detect The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW when reading the state of the CD pin. Without this patch, MMC1 won't be detected. This is the same patch submitted to linux-omap, but I was hoping to get it applied to U-Boot without having to wait for the linux adoption and then backporting. Fixes: 5448ff33f281 ("ARM: DTS: Resync Logic PD SOM-LV 37xx devkit with Linux 4.18-RC4") Signed-off-by: Adam Ford --- diff --git a/arch/arm/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/dts/logicpd-som-lv-baseboard.dtsi index 4990ed90dc..3524766515 100644 --- a/arch/arm/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/dts/logicpd-som-lv-baseboard.dtsi @@ -152,8 +152,8 @@ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ + wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ + cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */ vmmc-supply = <&vmmc1>; bus-width = <4>; cap-power-off-card;