From: Wenyou Yang Date: Fri, 9 Feb 2018 03:34:50 +0000 (+0800) Subject: clk: at91: add USB Host clock driver X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=cb0cb1b0cf20687cf980fbd64c56224f06d566aa;p=u-boot.git clk: at91: add USB Host clock driver Add USB clock driver to configure the input clock and the divider in the PMC_USB register to generate a 48MHz and a 12MHz signal to the USB Host OHCI. Signed-off-by: Wenyou Yang --- diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 08ad1bf2d0..fbda8d5f63 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -233,9 +233,15 @@ typedef struct at91_pmc { #define AT91_PMC_PDIV_1 (0 << 12) #define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_USB_USBS_MASK 0x1 +#define AT91_PMC_USB_USBS_OFFSET 0 +#define AT91_PMC_USB_USBS_(x) (x & 0x1) #define AT91_PMC_USBS_USB_PLLA (0x0) /* USB Clock Input is PLLA */ #define AT91_PMC_USBS_USB_UPLL (0x1) /* USB Clock Input is UPLL */ #define AT91_PMC_USBS_USB_PLLB (0x1) /* USB Clock Input is PLLB, AT91SAM9N12 only */ +#define AT91_PMC_USB_DIV_MASK 0xf +#define AT91_PMC_USB_DIV_OFFSET 8 +#define AT91_PMC_USB_DIV_(x) ((x & 0xf) << 8) #define AT91_PMC_USB_DIV_2 (0x1 << 8) /* USB Clock divided by 2 */ #define AT91_PMC_USBDIV_8 (0x7 << 8) /* USB Clock divided by 8 */ #define AT91_PMC_USBDIV_10 (0x9 << 8) /* USB Clock divided by 10 */ diff --git a/drivers/clk/at91/Kconfig b/drivers/clk/at91/Kconfig index fd56f200b9..8d482a2752 100644 --- a/drivers/clk/at91/Kconfig +++ b/drivers/clk/at91/Kconfig @@ -27,6 +27,14 @@ config AT91_UTMI fast crystal oscillator to meet the frequency accuracy required by USB. +config AT91_USB_CLK + bool "Support USB OHCI Input Clock" + depends on CLK_AT91 + help + This option is used to enable the USB Input Clock, from + the device tree, configure the USBS bit (PLLA or UTMI PLL) + and USBDIV field of the PMC_USB register. + config AT91_H32MX bool "Support H32MX 32-bit Matrix Clock" depends on CLK_AT91 diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index fbe3cb6581..8cac3f9e18 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -7,5 +7,6 @@ obj-y += clk-slow.o clk-main.o clk-plla.o clk-master.o obj-y += clk-system.o clk-peripheral.o obj-$(CONFIG_AT91_UTMI) += clk-utmi.o +obj-$(CONFIG_AT91_USB_CLK) += clk-usb.o obj-$(CONFIG_AT91_H32MX) += clk-h32mx.o obj-$(CONFIG_AT91_GENERIC_CLK) += clk-generated.o diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c new file mode 100644 index 0000000000..36622c09dc --- /dev/null +++ b/drivers/clk/at91/clk-usb.c @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2018 Microhip / Atmel Corporation + * Wenyou.Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include "pmc.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define AT91_USB_CLK_SOURCE_MAX 2 +#define AT91_USB_CLK_MAX_DIV 15 + +struct at91_usb_clk_priv { + u32 num_clksource; +}; + +static ulong at91_usb_clk_get_rate(struct clk *clk) +{ + struct pmc_platdata *plat = dev_get_platdata(clk->dev); + struct at91_pmc *pmc = plat->reg_base; + struct clk source; + u32 tmp, usbdiv; + u8 source_index; + int ret; + + tmp = readl(&pmc->pcr); + source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) & + AT91_PMC_USB_USBS_MASK; + usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK; + + ret = clk_get_by_index(clk->dev, source_index, &source); + if (ret) + return 0; + + return clk_get_rate(&source) / (usbdiv + 1); +} + +static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate) +{ + struct pmc_platdata *plat = dev_get_platdata(clk->dev); + struct at91_pmc *pmc = plat->reg_base; + struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev); + struct clk source, best_source; + ulong tmp_rate, best_rate = rate, source_rate; + int tmp_diff, best_diff = -1; + u32 div, best_div = 0; + u8 best_source_index = 0; + u8 i; + u32 tmp; + int ret; + + for (i = 0; i < priv->num_clksource; i++) { + ret = clk_get_by_index(clk->dev, i, &source); + if (ret) + return ret; + + source_rate = clk_get_rate(&source); + if (IS_ERR_VALUE(source_rate)) + return source_rate; + + for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) { + tmp_rate = DIV_ROUND_CLOSEST(source_rate, div); + tmp_diff = abs(rate - tmp_rate); + + if (best_diff < 0 || best_diff > tmp_diff) { + best_rate = tmp_rate; + best_diff = tmp_diff; + + best_div = div - 1; + best_source = source; + best_source_index = i; + } + + if (!best_diff || tmp_rate < rate) + break; + } + + if (!best_diff) + break; + } + + debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n", + best_source.dev->name, best_rate, best_div); + + ret = clk_enable(&best_source); + if (ret) + return ret; + + tmp = AT91_PMC_USB_USBS_(best_source_index) | + AT91_PMC_USB_DIV_(best_div); + writel(tmp, &pmc->usb); + + return 0; +} + +static struct clk_ops at91_usb_clk_ops = { + .get_rate = at91_usb_clk_get_rate, + .set_rate = at91_usb_clk_set_rate, +}; + +static int at91_usb_clk_ofdata_to_platdata(struct udevice *dev) +{ + struct at91_usb_clk_priv *priv = dev_get_priv(dev); + u32 cells[AT91_USB_CLK_SOURCE_MAX]; + u32 num_clksource; + + num_clksource = fdtdec_get_int_array_count(gd->fdt_blob, + dev_of_offset(dev), + "clocks", cells, + AT91_USB_CLK_SOURCE_MAX); + + if (!num_clksource) + return -1; + + priv->num_clksource = num_clksource; + + return 0; +} + +static int at91_usb_clk_probe(struct udevice *dev) +{ + return at91_pmc_core_probe(dev); +} + +static const struct udevice_id at91_usb_clk_match[] = { + { .compatible = "atmel,at91sam9x5-clk-usb" }, + {} +}; + +U_BOOT_DRIVER(at91_usb_clk) = { + .name = "at91-usb-clk", + .id = UCLASS_CLK, + .of_match = at91_usb_clk_match, + .probe = at91_usb_clk_probe, + .ofdata_to_platdata = at91_usb_clk_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct at91_usb_clk_priv), + .platdata_auto_alloc_size = sizeof(struct pmc_platdata), + .ops = &at91_usb_clk_ops, +};