From: Peter Hoyes <Peter.Hoyes@arm.com>
Date: Wed, 1 May 2024 08:16:32 +0000 (+0100)
Subject: arm: Move sev() and wfe() definitions to common Arm header file
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=b18a3c183d20812933d192d4b0d622b11ef2bf29;p=u-boot.git

arm: Move sev() and wfe() definitions to common Arm header file

The sev() and wfe() asm macros are currently defined only for
mach-exynos. As these are common Arm instructions, move them to the
common asm/system.h header file, for both Armv7 and Armv8, so they
can be used by other machines.

wfe may theoretically trigger a context switch if an interrupt occurs
so add a memory barrier to this call.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara<andre.przywara@arm.com>
---

diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 43f7503571..51123c2968 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -154,6 +154,13 @@ enum dcache_option {
 	"wfi" : : : "memory");		\
 	})
 
+#define wfe()				\
+	({asm volatile(			\
+	"wfe" : : : "memory");		\
+	})
+
+#define sev() asm volatile("sev")
+
 static inline unsigned int current_el(void)
 {
 	unsigned long el;
@@ -369,6 +376,8 @@ void switch_to_hypervisor_ret(void);
 
 #ifdef __ARM_ARCH_7A__
 #define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#define wfe() __asm__ __volatile__ ("wfe" : : : "memory")
+#define sev() __asm__ __volatile__ ("sev")
 #else
 #define wfi()
 #endif
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5d0bebac57..0aed4c3e2b 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -36,25 +36,6 @@ struct exynos5_sysreg {
 
 #define USB20_PHY_CFG_HOST_LINK_EN	(1 << 0)
 
-/*
- * This instruction causes an event to be signaled to all cores
- * within a multiprocessor system. If SEV is implemented,
- * WFE must also be implemented.
- */
-#define sev() __asm__ __volatile__ ("sev\n\t" : : );
-/*
- * If the Event Register is not set, WFE suspends execution until
- * one of the following events occurs:
- * - an IRQ interrupt, unless masked by the CPSR I-bit
- * - an FIQ interrupt, unless masked by the CPSR F-bit
- * - an Imprecise Data abort, unless masked by the CPSR A-bit
- * - a Debug Entry request, if Debug is enabled
- * - an Event signaled by another processor using the SEV instruction.
- * If the Event Register is set, WFE clears it and returns immediately.
- * If WFE is implemented, SEV must also be implemented.
- */
-#define wfe() __asm__ __volatile__ ("wfe\n\t" : : );
-
 /* Move 0xd3 value to CPSR register to enable SVC mode */
 #define svc32_mode_en() __asm__ __volatile__				\
 			("@ I&F disable, Mode: 0x13 - SVC\n\t"		\