From: Abbie Chang Date: Thu, 14 Jan 2021 21:34:12 +0000 (-0800) Subject: net: phy: ca_phy: Add driver for CAxxxx SoCs X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=a70d7b0192333133f8525305cce40f3d30e4281d;p=u-boot.git net: phy: ca_phy: Add driver for CAxxxx SoCs Add phy driver support for MACs embedded inside Cortina Access SoCs Signed-off-by: Abbie Chang Signed-off-by: Alex Nemirovsky CC: Joe Hershberger CC: Tom Rini CC: Aaron Tseng Moved out PHY specific code out of Cortina NI Ethernet driver and into a Cortina Access PHY interface driver --- diff --git a/MAINTAINERS b/MAINTAINERS index 1e5a361a87..6d8c467410 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -202,6 +202,7 @@ F: drivers/mtd/nand/raw/cortina_nand.c F: drivers/mtd/nand/raw/cortina_nand.h F: drivers/net/cortina_ni.c F: drivers/net/cortina_ni.h +F: drivers/net/phy/ca_phy.c F: configs/cortina_presidio-asic-pnand_defconfig ARM/CZ.NIC TURRIS MOX SUPPORT @@ -815,6 +816,7 @@ F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h F: drivers/net/cortina_ni.c F: drivers/net/cortina_ni.h +F: drivers/net/phy/ca_phy.c MIPS MEDIATEK M: Weijie Gao diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 51733dd123..d69503067d 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -131,6 +131,13 @@ config SYS_CORTINA_FW_IN_SPIFLASH endchoice +config PHY_CORTINA_ACCESS + bool "Cortina Access Ethernet PHYs support" + default y + depends on CORTINA_NI_ENET + help + Cortina Access Ethernet PHYs init process + config PHY_DAVICOM bool "Davicom Ethernet PHYs support" diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 6e722331f1..e967f82201 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o obj-$(CONFIG_PHY_ATHEROS) += atheros.o obj-$(CONFIG_PHY_BROADCOM) += broadcom.o obj-$(CONFIG_PHY_CORTINA) += cortina.o +obj-$(CONFIG_PHY_CORTINA_ACCESS) += ca_phy.o obj-$(CONFIG_PHY_DAVICOM) += davicom.o obj-$(CONFIG_PHY_ET1011C) += et1011c.o obj-$(CONFIG_PHY_LXT) += lxt.o diff --git a/drivers/net/phy/ca_phy.c b/drivers/net/phy/ca_phy.c new file mode 100644 index 0000000000..16851a6820 --- /dev/null +++ b/drivers/net/phy/ca_phy.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Cortina CS4315/CS4340 10G PHY drivers + * + * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_ID_RTL8211_EXT 0x001cc910 +#define PHY_ID_RTL8211_INT 0x001cc980 +#define PHY_ID_MASK 0xFFFFFFF0 + +static void __internal_phy_init(struct phy_device *phydev, int reset_phy) +{ + u8 phy_addr; + u16 data; + + /* should initialize 4 GPHYs at once */ + for (phy_addr = 4; phy_addr > 0; phy_addr--) { + phydev->addr = phy_addr; + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0BC6); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x0053); + phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x4003); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x7e01); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0A42); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0A40); + phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x1140); + } + + /* workaround to fix GPHY fail */ + for (phy_addr = 1; phy_addr < 5; phy_addr++) { + /* Clear clock fail interrupt */ + phydev->addr = phy_addr; + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0xB90); + data = phy_read(phydev, MDIO_DEVAD_NONE, 19); + if (data == 0x10) { + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0xB90); + data = phy_read(phydev, MDIO_DEVAD_NONE, 19); + printf("%s: read again.\n", __func__); + } + + printf("%s: phy_addr=%d, read register 19, value=0x%x\n", + __func__, phy_addr, data); + } +} + +static void __external_phy_init(struct phy_device *phydev, int reset_phy) +{ + u16 val; + + /* Disable response PHYAD=0 function of RTL8211 series PHY */ + /* REG31 write 0x0007, set to extension page */ + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0007); + + /* REG30 write 0x002C, set to extension page 44 */ + phy_write(phydev, MDIO_DEVAD_NONE, 30, 0x002C); + + /* + * REG27 write bit[2] = 0 disable response PHYAD = 0 function. + * we should read REG27 and clear bit[2], and write back + */ + val = phy_read(phydev, MDIO_DEVAD_NONE, 27); + val &= ~(1 << 2); + phy_write(phydev, MDIO_DEVAD_NONE, 27, val); + + /* REG31 write 0X0000, back to page0 */ + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000); +} + +static int rtl8211_external_config(struct phy_device *phydev) +{ + __external_phy_init(phydev, 0); + printf("%s: initialize RTL8211 external done.\n", __func__); + return 0; +} + +static int rtl8211_internal_config(struct phy_device *phydev) +{ + struct phy_device phydev_init; + + memcpy(&phydev_init, phydev, sizeof(struct phy_device)); + /* should initialize 4 GPHYs at once */ + __internal_phy_init(&phydev_init, 0); + printf("%s: initialize RTL8211 internal done.\n", __func__); + return 0; +} + +static int rtl8211_probe(struct phy_device *phydev) +{ + /* disable reset behavior */ + phydev->flags = PHY_FLAG_BROKEN_RESET; + return 0; +} + +/* Support for RTL8211 External PHY */ +struct phy_driver rtl8211_external_driver = { + .name = "Cortina RTL8211 External", + .uid = PHY_ID_RTL8211_EXT, + .mask = PHY_ID_MASK, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211_external_config, + .probe = &rtl8211_probe, + .startup = &genphy_startup, +}; + +/* Support for RTL8211 Internal PHY */ +struct phy_driver rtl8211_internal_driver = { + .name = "Cortina RTL8211 Inrernal", + .uid = PHY_ID_RTL8211_INT, + .mask = PHY_ID_MASK, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211_internal_config, + .probe = &rtl8211_probe, + .startup = &genphy_startup, +}; + +int phy_cortina_access_init(void) +{ + phy_register(&rtl8211_external_driver); + phy_register(&rtl8211_internal_driver); + return 0; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 9587e6b9fa..662ea2b98c 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -500,6 +500,9 @@ int phy_init(void) #ifdef CONFIG_PHY_CORTINA phy_cortina_init(); #endif +#ifdef CONFIG_PHY_CORTINA_ACCESS + phy_cortina_access_init(); +#endif #ifdef CONFIG_PHY_DAVICOM phy_davicom_init(); #endif diff --git a/include/phy.h b/include/phy.h index cbdb10d6fc..7750efd8bb 100644 --- a/include/phy.h +++ b/include/phy.h @@ -493,6 +493,7 @@ int phy_aquantia_init(void); int phy_atheros_init(void); int phy_broadcom_init(void); int phy_cortina_init(void); +int phy_cortina_access_init(void); int phy_davicom_init(void); int phy_et1011c_init(void); int phy_lxt_init(void);