From: Janne Grunau <j@jannau.net>
Date: Thu, 4 Apr 2024 06:25:54 +0000 (+0200)
Subject: usb: kbd: Add probe quirk for Apple and Keychron keyboards
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=63f6a449bffe46beca89580d3efa48e5d041025c;p=u-boot.git

usb: kbd: Add probe quirk for Apple and Keychron keyboards

Those keyboards do not return the current device state. Polling will
timeout unless there are key presses. This is not a problem during
operation but the initial device state query during probing will fail.
Skip this step in usb_kbd_probe_dev() to make these devices useable.
Not all Apple keyboards behave like this. A keyboard with USB
vendor/product ID 05ac:0221 is reported to work with the current code.
Unfortunately some Keychron keyboards "re-use" Apple's vendor ID and
show the same behavior (Keychron C2, 05ac:024f for example).

Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
---

diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index b2361bbf18..820f591fc5 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -31,6 +31,10 @@
 #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021	0x029a
 #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021		0x029f
 
+#define USB_VENDOR_ID_KEYCHRON	0x3434
+
+#define USB_HID_QUIRK_POLL_NO_REPORT_IDLE	BIT(0)
+
 /*
  * If overwrite_console returns 1, the stdin, stderr and stdout
  * are switched to the serial port, else the settings in the
@@ -474,6 +478,7 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum)
 	struct usb_interface *iface;
 	struct usb_endpoint_descriptor *ep;
 	struct usb_kbd_pdata *data;
+	unsigned int quirks = 0;
 	int epNum;
 
 	if (dev->descriptor.bNumConfigurations != 1)
@@ -506,6 +511,15 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum)
 
 	debug("USB KBD: found interrupt EP: 0x%x\n", ep->bEndpointAddress);
 
+	switch (dev->descriptor.idVendor) {
+	case USB_VENDOR_ID_APPLE:
+	case USB_VENDOR_ID_KEYCHRON:
+		quirks |= USB_HID_QUIRK_POLL_NO_REPORT_IDLE;
+		break;
+	default:
+		break;
+	}
+
 	data = malloc(sizeof(struct usb_kbd_pdata));
 	if (!data) {
 		printf("USB KBD: Error allocating private data\n");
@@ -546,6 +560,14 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum)
 	usb_set_idle(dev, iface->desc.bInterfaceNumber, 0, 0);
 #endif
 
+	/*
+	 * Apple and Keychron keyboards do not report the device state. Reports
+	 * are only returned during key presses.
+	 */
+	if (quirks & USB_HID_QUIRK_POLL_NO_REPORT_IDLE) {
+		debug("USB KBD: quirk: skip testing device state\n");
+		return 1;
+	}
 	debug("USB KBD: enable interrupt pipe...\n");
 #ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 	data->intq = create_int_queue(dev, data->intpipe, 1,