From: Simon Glass Date: Thu, 22 Aug 2024 13:54:54 +0000 (-0600) Subject: mmc: Use logging instead of printf() X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=3aa8c443b22cab7f943eddb20aac46ff96214339;p=u-boot.git mmc: Use logging instead of printf() The code makes quite a few uses of __func__ which puts the function name into the resulting SPL image. Use the log subsystem instead, to reduce size. The CONFIG_LOGF_FUNC option can be used to enable the function name. Use lower-case hex for the status output in sdhci_transfer_data(), to match sdhci_send_command() Signed-off-by: Simon Glass Reviewed-by: Quentin Schulz --- diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 560b7e889c..4833b5158c 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -32,8 +32,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) { if (timeout == 0) { - printf("%s: Reset 0x%x never completed.\n", - __func__, (int)mask); + log_warning("Reset %#x never completed\n", mask); return; } timeout--; @@ -139,8 +138,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data) do { stat = sdhci_readl(host, SDHCI_INT_STATUS); if (stat & SDHCI_INT_ERROR) { - pr_debug("%s: Error detected in status(0x%X)!\n", - __func__, stat); + log_debug("Error detected in status(%#x)!\n", stat); return -EIO; } if (!transfer_done && (stat & rdy)) { @@ -173,7 +171,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data) if (timeout-- > 0) udelay(10); else { - printf("%s: Transfer data timeout\n", __func__); + log_err("Transfer data timeout\n"); return -ETIMEDOUT; } } while (!(stat & SDHCI_INT_DATA_END)); @@ -232,13 +230,13 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { if (time >= cmd_timeout) { - printf("%s: MMC: %d busy ", __func__, mmc_dev); + log_warning("mmc%d busy ", mmc_dev); if (2 * cmd_timeout <= SDHCI_CMD_MAX_TIMEOUT) { cmd_timeout += cmd_timeout; - printf("timeout increasing to: %u ms.\n", - cmd_timeout); + log_warning("timeout increasing to: %u ms\n", + cmd_timeout); } else { - puts("timeout.\n"); + log_warning("timeout\n"); return -ECOMM; } } @@ -316,8 +314,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, } if (get_timer(start) >= SDHCI_READ_STATUS_TIMEOUT) { - printf("%s: Timeout for status update: %08x %08x\n", - __func__, stat, mask); + log_warning("Timeout for status update: %08x %08x\n", + stat, mask); return -ETIMEDOUT; } } while ((stat & mask) != mask); @@ -358,7 +356,7 @@ static int sdhci_execute_tuning(struct udevice *dev, uint opcode) struct mmc *mmc = mmc_get_mmc_dev(dev); struct sdhci_host *host = mmc->priv; - debug("%s\n", __func__); + log_debug("sdhci tuning\n"); if (host->ops && host->ops->platform_execute_tuning) { err = host->ops->platform_execute_tuning(mmc, opcode); @@ -380,8 +378,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock) while (sdhci_readl(host, SDHCI_PRESENT_STATE) & (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) { if (timeout == 0) { - printf("%s: Timeout to wait cmd & data inhibit\n", - __func__); + log_err("Timeout waiting for cmd & data inhibit\n"); return -EBUSY; } @@ -397,7 +394,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock) if (host->ops && host->ops->set_delay) { ret = host->ops->set_delay(host); if (ret) { - printf("%s: Error while setting tap delay\n", __func__); + log_err("Error while setting tap delay\n"); return ret; } } @@ -405,7 +402,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock) if (host->ops && host->ops->config_dll) { ret = host->ops->config_dll(host, clock, false); if (ret) { - printf("%s: Error while configuring dll\n", __func__); + log_err("Error configuring dll\n"); return ret; } } @@ -456,7 +453,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock) if (host->ops && host->ops->config_dll) { ret = host->ops->config_dll(host, clock, true); if (ret) { - printf("%s: Error while configuring dll\n", __func__); + log_err("Error while configuring dll\n"); return ret; } } @@ -472,8 +469,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock) while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { - printf("%s: Internal clock never stabilised.\n", - __func__); + log_err("Internal clock never stabilised.\n"); return -EBUSY; } timeout--; @@ -738,8 +734,7 @@ static int sdhci_init(struct mmc *mmc) if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) { host->align_buffer = memalign(8, 512 * 1024); if (!host->align_buffer) { - printf("%s: Aligned buffer alloc failed!!!\n", - __func__); + log_err("Aligned buffer alloc failed\n"); return -ENOMEM; } } @@ -881,20 +876,18 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, #else caps = sdhci_readl(host, SDHCI_CAPABILITIES); #endif - debug("%s, caps: 0x%x\n", __func__, caps); + log_debug("caps: %#x\n", caps); #if CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) if ((caps & SDHCI_CAN_DO_SDMA)) { host->flags |= USE_SDMA; } else { - debug("%s: Your controller doesn't support SDMA!!\n", - __func__); + log_debug("Controller doesn't support SDMA\n"); } #endif #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA) if (!(caps & SDHCI_CAN_DO_ADMA2)) { - printf("%s: Your controller doesn't support ADMA!!\n", - __func__); + log_err("Controller doesn't support ADMA\n"); return -EINVAL; } if (!host->adma_desc_table) { @@ -927,7 +920,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, #else caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); #endif - debug("%s, caps_1: 0x%x\n", __func__, caps_1); + log_debug("caps_1: %#x\n", caps_1); host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; @@ -953,8 +946,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host, host->max_clk *= host->clk_mul; } if (host->max_clk == 0) { - printf("%s: Hardware doesn't specify base clock frequency\n", - __func__); + log_err("Hardware doesn't specify base clock frequency\n"); return -EINVAL; } if (f_max && (f_max < host->max_clk)) @@ -1047,7 +1039,7 @@ int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min) host->mmc = mmc_create(&host->cfg, host); if (host->mmc == NULL) { - printf("%s: mmc create fail!\n", __func__); + log_err("mmc create fail\n"); return -ENOMEM; }