From: Sean Anderson Date: Fri, 5 Feb 2021 14:39:01 +0000 (-0500) Subject: doc: Rename k210 partitions anchor X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=1500c79dc3b1c67c492abec14badbb8efc576478;p=u-boot.git doc: Rename k210 partitions anchor This anchor is only for the k210 partition layout, so rename it appropriately. This keeps it from conflicting with the (to be added) anchor for U-Boot partitions in general. Signed-off-by: Sean Anderson Reviewed-by: Simon Glass --- diff --git a/doc/board/sipeed/maix.rst b/doc/board/sipeed/maix.rst index bf945b3458..ef79297ef0 100644 --- a/doc/board/sipeed/maix.rst +++ b/doc/board/sipeed/maix.rst @@ -258,7 +258,7 @@ SPI Flash """"""""" To load an image off of SPI flash, first set up a partition as described in -:ref:`partitions`. Then, use ``mtd`` to load that partition +:ref:`k210_partitions`. Then, use ``mtd`` to load that partition .. code-block:: none @@ -401,7 +401,7 @@ Sipeed MAIX boards typically provide around 16 MiB of SPI NOR flash. U-Boot is stored in the first 1 MiB or so of this flash. U-Boot's environment is stored at the end of flash. -.. _partitions: +.. _k210_partitions: Partitions """"""""""