From: Pali Rohár Date: Tue, 15 Feb 2022 10:34:01 +0000 (+0100) Subject: pci: mvebu: Ensure that root port is always on root zero bus X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=0eebc3dbe5659cc0163fd37ea87727edd8343379;p=u-boot.git pci: mvebu: Ensure that root port is always on root zero bus Writing to the PCI_PRIMARY_BUS register of the root port should not change bus number on which is root port present. Same change and exactly same fix as was done in commit for pci-aardvark.c. Fixes: a7b61ab58d5d ("pci: pci_mvebu: Properly configure and use PCI Bridge (PCIe Root Port)") Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c index d99a99bae9..5a0a59a8b9 100644 --- a/drivers/pci/pci_mvebu.c +++ b/drivers/pci/pci_mvebu.c @@ -78,7 +78,6 @@ struct mvebu_pcie { bool is_x4; int devfn; u32 lane_mask; - int first_busno; int sec_busno; char name[16]; unsigned int mem_target; @@ -140,12 +139,12 @@ static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose) static bool mvebu_pcie_valid_addr(struct mvebu_pcie *pcie, int busno, int dev, int func) { - /* On primary bus is only one PCI Bridge */ - if (busno == pcie->first_busno && (dev != 0 || func != 0)) + /* On the root bus is only one PCI Bridge */ + if (busno == 0 && (dev != 0 || func != 0)) return false; /* Access to other buses is possible when link is up */ - if (busno != pcie->first_busno && !mvebu_pcie_link_up(pcie)) + if (busno != 0 && !mvebu_pcie_link_up(pcie)) return false; /* On secondary bus can be only one PCIe device */ @@ -173,15 +172,15 @@ static int mvebu_pcie_read_config(const struct udevice *bus, pci_dev_t bdf, } /* - * The configuration space of the PCI Bridge on primary (first) bus is + * The configuration space of the PCI Bridge on the root bus (zero) is * of Type 0 but the BAR registers (including ROM BAR) don't have the * same meaning as in the PCIe specification. Therefore do not access * BAR registers and non-common registers (those which have different * meaning for Type 0 and Type 1 config space) of the PCI Bridge and * instead read their content from driver virtual cfgcache[]. */ - if (busno == pcie->first_busno && ((offset >= 0x10 && offset < 0x34) || - (offset >= 0x38 && offset < 0x3c))) { + if (busno == 0 && ((offset >= 0x10 && offset < 0x34) || + (offset >= 0x38 && offset < 0x3c))) { data = pcie->cfgcache[(offset - 0x10) / 4]; debug("(addr,size,val)=(0x%04x, %d, 0x%08x) from cfgcache\n", offset, size, data); @@ -190,10 +189,10 @@ static int mvebu_pcie_read_config(const struct udevice *bus, pci_dev_t bdf, } /* - * PCI bridge is device 0 at primary bus but mvebu has it mapped on - * secondary bus with device number 1. + * PCI bridge is device 0 at the root bus (zero) but mvebu has it + * mapped on secondary bus with device number 1. */ - if (busno == pcie->first_busno) + if (busno == 0) addr = PCI_CONF1_EXT_ADDRESS(pcie->sec_busno, 1, 0, offset); else addr = PCI_CONF1_EXT_ADDRESS(busno, PCI_DEV(bdf), PCI_FUNC(bdf), offset); @@ -216,8 +215,7 @@ static int mvebu_pcie_read_config(const struct udevice *bus, pci_dev_t bdf, return -EINVAL; } - if (busno == pcie->first_busno && - (offset & ~3) == (PCI_HEADER_TYPE & ~3)) { + if (busno == 0 && (offset & ~3) == (PCI_HEADER_TYPE & ~3)) { /* * Change Header Type of PCI Bridge device to Type 1 * (0x01, used by PCI Bridges) because mvebu reports @@ -257,10 +255,10 @@ static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf, * config registers are not available, so we write their content only * into driver virtual cfgcache[]. * And as explained in mvebu_pcie_probe(), mvebu has its own specific - * way for configuring primary and secondary bus numbers. + * way for configuring secondary bus number. */ - if (busno == pcie->first_busno && ((offset >= 0x10 && offset < 0x34) || - (offset >= 0x38 && offset < 0x3c))) { + if (busno == 0 && ((offset >= 0x10 && offset < 0x34) || + (offset >= 0x38 && offset < 0x3c))) { debug("Writing to cfgcache only\n"); data = pcie->cfgcache[(offset - 0x10) / 4]; data = pci_conv_size_to_32(data, value, offset, size); @@ -270,12 +268,6 @@ static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf, (offset & ~3) == PCI_ROM_ADDRESS1) data = 0x0; pcie->cfgcache[(offset - 0x10) / 4] = data; - /* mvebu has its own way how to set PCI primary bus number */ - if (offset == PCI_PRIMARY_BUS) { - pcie->first_busno = data & 0xff; - debug("Primary bus number was changed to %d\n", - pcie->first_busno); - } /* mvebu has its own way how to set PCI secondary bus number */ if (offset == PCI_SECONDARY_BUS || (offset == PCI_PRIMARY_BUS && size != PCI_SIZE_8)) { @@ -288,10 +280,10 @@ static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf, } /* - * PCI bridge is device 0 at primary bus but mvebu has it mapped on - * secondary bus with device number 1. + * PCI bridge is device 0 at the root bus (zero) but mvebu has it + * mapped on secondary bus with device number 1. */ - if (busno == pcie->first_busno) + if (busno == 0) addr = PCI_CONF1_EXT_ADDRESS(pcie->sec_busno, 1, 0, offset); else addr = PCI_CONF1_EXT_ADDRESS(busno, PCI_DEV(bdf), PCI_FUNC(bdf), offset); @@ -473,9 +465,9 @@ static int mvebu_pcie_probe(struct udevice *dev) * target device equals local device number then request is routed to * PCI Bridge which represent local PCIe Root Port. * - * It means that PCI primary and secondary buses shares one bus number + * It means that PCI root and secondary buses shares one bus number * which is configured via local bus number. Determination if config - * request should go to primary or secondary bus is done based on local + * request should go to root or secondary bus is done based on local * device number. * * PCIe is point-to-point bus, so at secondary bus is always exactly one @@ -487,13 +479,13 @@ static int mvebu_pcie_probe(struct udevice *dev) * secondary bus number. Set it to 0 as U-Boot CONFIG_PCI_PNP code will * later configure it via config write requests to the correct value. * mvebu_pcie_write_config() catches config write requests which tries - * to change primary/secondary bus number and correctly updates local - * bus number based on new secondary bus number. + * to change secondary bus number and correctly updates local bus number + * based on new secondary bus number. * * With this configuration is PCI Bridge available at secondary bus as - * device number 1. But it must be available at primary bus as device + * device number 1. But it must be available at root bus (zero) as device * number 0. So in mvebu_pcie_read_config() and mvebu_pcie_write_config() - * functions rewrite address to the real one when accessing primary bus. + * functions rewrite address to the real one when accessing the root bus. */ mvebu_pcie_set_local_bus_nr(pcie, 0); mvebu_pcie_set_local_dev_nr(pcie, 1);