From: Svyatoslav Ryhel Date: Sun, 7 Jan 2024 09:17:47 +0000 (+0200) Subject: board: tegra30: switch to button cmd X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=00d847def6847f7dea22d3d8a3d51e8ff9b5431b;p=u-boot.git board: tegra30: switch to button cmd Use recently added ability to assign commands to buttons via env. Signed-off-by: Svyatoslav Ryhel --- diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig index 00e46f9be6..3230d360ed 100644 --- a/configs/endeavoru_defconfig +++ b/configs/endeavoru_defconfig @@ -14,12 +14,13 @@ CONFIG_TEGRA30=y CONFIG_TARGET_ENDEAVORU=y CONFIG_CMD_EBTUPDATE=y CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_BUTTON_CMD=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;" +CONFIG_BOOTCOMMAND="bootflow scan; poweroff" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig index 05207c8a89..001f5b8804 100644 --- a/configs/grouper_common_defconfig +++ b/configs/grouper_common_defconfig @@ -14,12 +14,13 @@ CONFIG_TEGRA30=y CONFIG_TARGET_GROUPER=y CONFIG_CMD_EBTUPDATE=y CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_BUTTON_CMD=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;" +CONFIG_BOOTCOMMAND="bootflow scan; poweroff" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig index 992625a569..11a552d9b0 100644 --- a/configs/transformer_t30_defconfig +++ b/configs/transformer_t30_defconfig @@ -14,12 +14,13 @@ CONFIG_TEGRA30=y CONFIG_TARGET_TRANSFORMER_T30=y CONFIG_CMD_EBTUPDATE=y CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_BUTTON_CMD=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="setenv skip_boot 0; setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; if test ${skip_boot} -eq 1; then; else setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff; fi" +CONFIG_BOOTCOMMAND="setenv boot_targets usb mmc1 mmc0; bootflow scan; poweroff" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig index 44fa48baae..c489d59ef0 100644 --- a/configs/x3_t30_defconfig +++ b/configs/x3_t30_defconfig @@ -15,12 +15,13 @@ CONFIG_TARGET_X3_T30=y CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_CMD_EBTUPDATE=y CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_BUTTON_CMD=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; bootflow scan; poweroff;" +CONFIG_BOOTCOMMAND="bootflow scan; poweroff" CONFIG_SYS_PBSIZE=2084 CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 diff --git a/include/configs/endeavoru.h b/include/configs/endeavoru.h index 46c582e963..348078f977 100644 --- a/include/configs/endeavoru.h +++ b/include/configs/endeavoru.h @@ -53,7 +53,8 @@ "boot_block_size_r=0x200000\0" \ "boot_block_size=0x1000\0" \ "bootloader_file=u-boot-dtb-tegra.bin\0" \ - "check_button=gpio input 179; test $? -eq 0\0" \ + "button_cmd_0_name=Volume Down\0" \ + "button_cmd_0=bootmenu\0" \ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ ENDEAVORU_BOOTMENU diff --git a/include/configs/grouper.h b/include/configs/grouper.h index 93304ddc6e..8064b88902 100644 --- a/include/configs/grouper.h +++ b/include/configs/grouper.h @@ -49,7 +49,10 @@ "boot_block_size_r=0x200000\0" \ "boot_block_size=0x1000\0" \ "bootloader_file=u-boot-dtb-tegra.bin\0" \ - "check_button=gpio input 131; test $? -eq 0;\0" \ + "button_cmd_0_name=Volume Down\0" \ + "button_cmd_0=bootmenu\0" \ + "button_cmd_1_name=Lid\0" \ + "button_cmd_1=poweroff\0" \ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ GROUPER_BOOTMENU diff --git a/include/configs/transformer-common.h b/include/configs/transformer-common.h index 3b7db0ab14..bb6817c8d2 100644 --- a/include/configs/transformer-common.h +++ b/include/configs/transformer-common.h @@ -71,18 +71,20 @@ "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \ "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \ "bootmenu_3=update bootloader=run flash_uboot\0" \ - "bootmenu_4=enter console=usb start; setenv skip_boot 1; exit\0" \ - "bootmenu_5=reboot RCM=enterrcm\0" \ - "bootmenu_6=reboot=reset\0" \ - "bootmenu_7=power off=poweroff\0" \ + "bootmenu_4=reboot RCM=enterrcm\0" \ + "bootmenu_5=reboot=reset\0" \ + "bootmenu_6=power off=poweroff\0" \ "bootmenu_delay=-1\0" #define BOARD_EXTRA_ENV_SETTINGS \ "spi_size=0x400000\0" \ "boot_block_size_r=0x200000\0" \ "boot_block_size=0x1000\0" \ - "check_button=gpio input ${gpio_button}; test $? -eq 0;\0" \ "bootloader_file=u-boot-dtb-tegra.bin\0" \ + "button_cmd_0_name=Volume Down\0" \ + "button_cmd_0=bootmenu\0" \ + "button_cmd_1_name=Lid sensor\0" \ + "button_cmd_1=poweroff\0" \ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ TRANSFORMER_BOOTMENU diff --git a/include/configs/x3-t30.h b/include/configs/x3-t30.h index 14532542ea..78a2012861 100644 --- a/include/configs/x3-t30.h +++ b/include/configs/x3-t30.h @@ -54,7 +54,8 @@ "boot_block_size_r=0x200000\0" \ "boot_block_size=0x1000\0" \ "bootloader_file=u-boot-dtb-tegra.bin\0" \ - "check_button=gpio input 116; test $? -eq 0\0" \ + "button_cmd_0_name=Volume Down\0" \ + "button_cmd_0=bootmenu\0" \ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ X3_BOOTMENU