eth/r8152: reset bmu after disabling Tx/Rx

Reset bmu after disabling Tx/Rx. This is used to clear the FIFO of
Tx/Rx. The remained data may be transferred after Tx/Rx is re-enabled.
And it results in garbage data.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>

diff --git a/drivers/usb/eth/r8152.c b/drivers/usb/eth/r8152.c
index 1845d957f97379c943e236b4ea2fb4827dc1c466..8cefacbd7ecef3ee8cc163c7aac677248c91f096 100644 (file)
--- a/drivers/usb/eth/r8152.c
+++ b/drivers/usb/eth/r8152.c
@@ -568,6 +568,17 @@ static void r8153_power_cut_en(struct r8152 *tp, bool enable)
        ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
 }
 
+static void rtl_reset_bmu(struct r8152 *tp)
+{
+       u8 ocp_data;
+
+       ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+       ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+       ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+       ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
+       ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+}
+
 static int r8152_read_mac(struct r8152 *tp, unsigned char *macaddr)
 {
        int ret;
@@ -786,6 +797,7 @@ static void r8153_first_init(struct r8152 *tp)
        r8153_hw_phy_cfg(tp);
 
        rtl8152_nic_reset(tp);
+       rtl_reset_bmu(tp);
 
        ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
        ocp_data &= ~NOW_IS_OOB;
@@ -832,6 +844,7 @@ static void r8153_enter_oob(struct r8152 *tp)
        ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 
        rtl_disable(tp);
+       rtl_reset_bmu(tp);
 
        rtl8152_reinit_ll(tp);
 
@@ -873,6 +886,7 @@ static void rtl8153_disable(struct r8152 *tp)
 {
        r8153_disable_aldps(tp);
        rtl_disable(tp);
+       rtl_reset_bmu(tp);
 }
 
 static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)

diff --git a/drivers/usb/eth/r8152.h b/drivers/usb/eth/r8152.h
index 10e0da8eb105ff1b16ceb1b39074781bd4a47b53..4daf4ee87d7828b9aa5c649fc3f7ab469c40d846 100644 (file)
--- a/drivers/usb/eth/r8152.h
+++ b/drivers/usb/eth/r8152.h
@@ -89,9 +89,10 @@
 #define USB_TX_DMA             0xd434
 #define USB_TOLERANCE          0xd490
 #define USB_LPM_CTRL           0xd41a
+#define USB_BMU_RESET          0xd4b0
 #define USB_UPS_CTRL           0xd800
-#define USB_MISC_0             0xd81a
 #define USB_POWER_CUT          0xd80a
+#define USB_MISC_0             0xd81a
 #define USB_AFE_CTRL2          0xd824
 #define USB_WDT11_CTRL         0xe43c
 #define USB_BP_BA              0xfc26
@@ -324,6 +325,10 @@
 #define TEST_MODE_DISABLE      0x00000001
 #define TX_SIZE_ADJUST1                0x00000100
 
+/* USB_BMU_RESET */
+#define BMU_RESET_EP_IN                0x01
+#define BMU_RESET_EP_OUT       0x02
+
 /* USB_UPS_CTRL */
 #define POWER_CUT              0x0100