]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
usb: dwc3: gadget: clear SUSPHY bit before ep cmds
authorFelipe Balbi <felipe.balbi@linux.intel.com>
Fri, 12 Apr 2024 20:26:02 +0000 (22:26 +0200)
committerMattijs Korpershoek <mkorpershoek@baylibre.com>
Thu, 16 May 2024 06:38:24 +0000 (08:38 +0200)
Upstream Linux commit 2b0f11df84bb.

Synopsys Databook 2.60a has a note that if we're
sending an endpoint command we _must_ make sure that
DWC3_GUSB2PHY(n).SUSPHY bit is cleared.

This patch implements that particular detail.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240412202611.3565052-3-alexander.sverdlin@siemens.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
drivers/usb/dwc3/gadget.c

index b4cc238fa1ac2f7526a6ac0a77645a24bf055477..06a29ed8640d66ea37101f7a77f076a5e28495c4 100644 (file)
@@ -301,8 +301,25 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 {
        u32                     timeout = 500;
        u32                     reg;
+
+       int                     susphy = false;
        int                     ret = -EINVAL;
 
+       /*
+        * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
+        * we're issuing an endpoint command, we must check if
+        * GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it.
+        *
+        * We will also set SUSPHY bit to what it was before returning as stated
+        * by the same section on Synopsys databook.
+        */
+       reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+       if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+               susphy = true;
+               reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+               dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+       }
+
        dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
        dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
        dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
@@ -330,6 +347,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
                udelay(1);
        } while (1);
 
+       if (unlikely(susphy)) {
+               reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+               reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+               dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+       }
+
        return ret;
 }