CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x700000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
-CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
CONFIG_SPL_TEXT_BASE=0x2049A000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x400000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
-CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx93-11x11-evk"
CONFIG_SPL_TEXT_BASE=0x2049A000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x700000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
-CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx93-var-som-symphony"
CONFIG_SPL_TEXT_BASE=0x2049A000
CONFIG_TARGET_IMX93_VAR_SOM=y
+CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK=0x20519dd0
CONFIG_SPL=y
CONFIG_CMD_DEKBLOB=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x80400000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x90000000
+CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
-CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=1
+CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTCOMMAND="run bsp_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx93-var-som-symphony.dtb"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x26000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_PROMPT="u-boot=> "
CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_CBSIZE=2048
-CONFIG_SYS_PBSIZE=2074
CONFIG_CMD_ERASEENV=y
CONFIG_CMD_NVEDIT_EFI=y
-CONFIG_CMD_NET=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_EEPROM=y
CONFIG_SYS_I2C_EEPROM_BUS=3
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_WDT=y
CONFIG_BOOTP_PREFER_SERVERIP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
-CONFIG_SYSCON=y
CONFIG_SPL_CLK_IMX93=y
CONFIG_CLK_IMX93=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82800000
-CONFIG_FASTBOOT_BUF_SIZE=0x20000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=1
CONFIG_GPIO_HOG=y
CONFIG_IMX_RGPIO2P=y
CONFIG_DM_PCA953X=y
CONFIG_PHY_ADIN=y
CONFIG_PHY_ATHEROS=y
CONFIG_PHY_REALTEK=y
-CONFIG_DM_ETH=y
CONFIG_DM_ETH_PHY=y
CONFIG_PHY_GIGE=y
CONFIG_DWC_ETH_QOS=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_MIPI_DPHY_HELPERS=y
-CONFIG_PHY_IMX93_MIPI_DPHY=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX93=y
CONFIG_POWER_DOMAIN=y
-CONFIG_IMX93_BLK_CTRL=y
CONFIG_DM_PMIC=y
CONFIG_SPL_DM_PMIC_PCA9450=y
CONFIG_DM_REGULATOR=y
CONFIG_FSL_LPUART=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_TMU=y
-CONFIG_CI_UDC=y
CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
CONFIG_LZO=y
CONFIG_BZIP2=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_WATCHDOG=y
-CONFIG_WDT=y
-CONFIG_CMD_WDT=y
-CONFIG_ETHPRIME="eth0"
-CONFIG_SYS_I2C_SPEED=100000
-CONFIG_IMX_BOOTAUX=y
-CONFIG_CMD_READ=y
-CONFIG_SERIAL_TAG=y
\ No newline at end of file