env: ti: j721e-evm: Update R5 SPL rproc env variables for J7200

The R5 SPL on J7200 SoCs will be limited to booting just the
MCU R5FSS0 R5F core in LockStep-mode at present, so add the
two required environment variables 'addr_mcur5f0_0load' and
'name_mcur5f0_0fw' that are needed by the R5 SPL early-boot
logic. The firmware name used is also different from that on
J721E SoCs.

Signed-off-by: Suman Anna <s-anna@ti.com>

diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index 9988c43641a2a6b35a27c29db8753111ca274a4d..1b47e18b2f9579d200ca8d095aa2cb1587f53cab 100644 (file)
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -84,11 +84,17 @@
        "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
 
 #ifdef CONFIG_SYS_K3_SPL_ATF
+#if defined(CONFIG_TARGET_J721E_R5_EVM)
 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                             \
        "addr_mainr5f0_0load=0x88000000\0"                              \
        "name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0"           \
        "addr_mcur5f0_0load=0x89000000\0"                               \
        "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
+#elif defined(CONFIG_TARGET_J7200_R5_EVM)
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                             \
+       "addr_mcur5f0_0load=0x89000000\0"                               \
+       "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
+#endif /* CONFIG_TARGET_J721E_R5_EVM */
 #else
 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
 #endif /* CONFIG_SYS_K3_SPL_ATF */