ARM: da8xxevm: Add NAND instructions for da850-evm to README

The README.da850 file continues information on how to burn NAND
for the LCDK, but not the DA850-EVM.  This patch adds both the
commands and dip switch instructions for burning and booting
NAND.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/board/davinci/da8xxevm/README.da850 b/board/davinci/da8xxevm/README.da850
index f24e8b534294c2a913bc3358669bf40d1087797d..5775b7d80fd01e2debcf807559dbb6c20e0af79b 100644 (file)
--- a/board/davinci/da8xxevm/README.da850
+++ b/board/davinci/da8xxevm/README.da850
@@ -88,6 +88,14 @@ In this case the commands would be simplified to:
   U-Boot > nand erase.part bootloader
   U-Boot > nand write 0xc0700000 bootloader
 
+On the DA850-EVM, NAND can also be written with SW7:7-8 ON and
+
+  sudo mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 \
+       -flash_noubl -flashType NAND ~/src/u-boot/u-boot.ais
+
+To boot the DA850-EVM from NAND, SW7:5 should be switched on and all others
+off.
+
 Flashing the images to MMC
 ==========================
 If the boot pins are set to boot from mmc, the RBL will try to load the