]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
wdt: aspeed: Add AST2600 watchdog support
authorChia-Wei, Wang <chiawei_wang@aspeedtech.com>
Mon, 14 Dec 2020 05:54:25 +0000 (13:54 +0800)
committerTom Rini <trini@konsulko.com>
Mon, 18 Jan 2021 20:23:05 +0000 (15:23 -0500)
AST2600 has 8 watchdog timers including 8 sets of
32-bit decrement counters, based on 1MHz clock.

A 64-bit reset mask is also supported to specify
which controllers should be reset by the WDT reset.

Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
arch/arm/include/asm/arch-aspeed/wdt_ast2600.h [new file with mode: 0644]
drivers/watchdog/Kconfig
drivers/watchdog/Makefile
drivers/watchdog/ast2600_wdt.c [new file with mode: 0644]

diff --git a/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h b/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
new file mode 100644 (file)
index 0000000..96e8ca0
--- /dev/null
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020 Aspeed Technology Inc.
+ */
+
+#ifndef _ASM_ARCH_WDT_AST2600_H
+#define _ASM_ARCH_WDT_AST2600_H
+
+#define WDT_BASE                       0x1e785000
+
+/*
+ * Special value that needs to be written to counter_restart register to
+ * (re)start the timer
+ */
+#define WDT_COUNTER_RESTART_VAL                0x4755
+
+/* reset mode */
+#define WDT_RESET_MODE_SOC             0
+#define WDT_RESET_MODE_CHIP            1
+#define WDT_RESET_MODE_CPU             2
+
+/* bit-fields of WDT control register */
+#define WDT_CTRL_2ND_BOOT              BIT(7)
+#define WDT_CTRL_RESET_MODE_MASK       GENMASK(6, 5)
+#define WDT_CTRL_RESET_MODE_SHIFT      5
+#define WDT_CTRL_CLK1MHZ               BIT(4)
+#define WDT_CTRL_RESET                 BIT(1)
+#define WDT_CTRL_EN                    BIT(0)
+
+/* bit-fields of WDT reset mask1 register */
+#define WDT_RESET_MASK1_RVAS           BIT(25)
+#define WDT_RESET_MASK1_GPIO1          BIT(24)
+#define WDT_RESET_MASK1_XDMA2          BIT(23)
+#define WDT_RESET_MASK1_XDMA1          BIT(22)
+#define WDT_RESET_MASK1_MCTP2          BIT(21)
+#define WDT_RESET_MASK1_MCTP1          BIT(20)
+#define WDT_RESET_MASK1_JTAG1          BIT(19)
+#define WDT_RESET_MASK1_SD_SDIO1       BIT(18)
+#define WDT_RESET_MASK1_MAC2           BIT(17)
+#define WDT_RESET_MASK1_MAC1           BIT(16)
+#define WDT_RESET_MASK1_GPMCU          BIT(15)
+#define WDT_RESET_MASK1_DPMCU          BIT(14)
+#define WDT_RESET_MASK1_DP             BIT(13)
+#define WDT_RESET_MASK1_HAC            BIT(12)
+#define WDT_RESET_MASK1_VIDEO          BIT(11)
+#define WDT_RESET_MASK1_CRT            BIT(10)
+#define WDT_RESET_MASK1_GCRT           BIT(9)
+#define WDT_RESET_MASK1_USB11_UHCI     BIT(8)
+#define WDT_RESET_MASK1_USB_PORTA      BIT(7)
+#define WDT_RESET_MASK1_USB_PORTB      BIT(6)
+#define WDT_RESET_MASK1_COPROC         BIT(5)
+#define WDT_RESET_MASK1_SOC            BIT(4)
+#define WDT_RESET_MASK1_SLI            BIT(3)
+#define WDT_RESET_MASK1_AHB            BIT(2)
+#define WDT_RESET_MASK1_SDRAM          BIT(1)
+#define WDT_RESET_MASK1_ARM            BIT(0)
+
+/* bit-fields of WDT reset mask2 register */
+#define WDT_RESET_MASK2_ESPI           BIT(26)
+#define WDT_RESET_MASK2_I3C_BUS8       BIT(25)
+#define WDT_RESET_MASK2_I3C_BUS7       BIT(24)
+#define WDT_RESET_MASK2_I3C_BUS6       BIT(23)
+#define WDT_RESET_MASK2_I3C_BUS5       BIT(22)
+#define WDT_RESET_MASK2_I3C_BUS4       BIT(21)
+#define WDT_RESET_MASK2_I3C_BUS3       BIT(20)
+#define WDT_RESET_MASK2_I3C_BUS2       BIT(19)
+#define WDT_RESET_MASK2_I3C_BUS1       BIT(18)
+#define WDT_RESET_MASK2_I3C_GLOBAL     BIT(17)
+#define WDT_RESET_MASK2_I2C            BIT(16)
+#define WDT_RESET_MASK2_FSI            BIT(15)
+#define WDT_RESET_MASK2_ADC            BIT(14)
+#define WDT_RESET_MASK2_PWM            BIT(13)
+#define WDT_RESET_MASK2_PECI           BIT(12)
+#define WDT_RESET_MASK2_LPC            BIT(11)
+#define WDT_RESET_MASK2_MDC_MDIO       BIT(10)
+#define WDT_RESET_MASK2_GPIO2          BIT(9)
+#define WDT_RESET_MASK2_JTAG2          BIT(8)
+#define WDT_RESET_MASK2_SD_SDIO2       BIT(7)
+#define WDT_RESET_MASK2_MAC4           BIT(6)
+#define WDT_RESET_MASK2_MAC3           BIT(5)
+#define WDT_RESET_MASK2_SOC            BIT(4)
+#define WDT_RESET_MASK2_SLI2           BIT(3)
+#define WDT_RESET_MASK2_AHB2           BIT(2)
+#define WDT_RESET_MASK2_SPI1_SPI2      BIT(1)
+#define WDT_RESET_MASK2_ARM            BIT(0)
+
+#define WDT_RESET_MASK1_DEFAULT                                                \
+       (WDT_RESET_MASK1_RVAS | WDT_RESET_MASK1_GPIO1 |                 \
+        WDT_RESET_MASK1_JTAG1 | WDT_RESET_MASK1_SD_SDIO1 |             \
+        WDT_RESET_MASK1_MAC2 | WDT_RESET_MASK1_MAC1 |                  \
+        WDT_RESET_MASK1_HAC | WDT_RESET_MASK1_VIDEO |                  \
+        WDT_RESET_MASK1_CRT | WDT_RESET_MASK1_GCRT |                   \
+        WDT_RESET_MASK1_USB11_UHCI | WDT_RESET_MASK1_USB_PORTA |       \
+        WDT_RESET_MASK1_USB_PORTB | WDT_RESET_MASK1_COPROC |           \
+        WDT_RESET_MASK1_SOC | WDT_RESET_MASK1_ARM)
+
+#define WDT_RESET_MASK2_DEFAULT                                                \
+       (WDT_RESET_MASK2_I3C_BUS8 | WDT_RESET_MASK2_I3C_BUS7 |          \
+        WDT_RESET_MASK2_I3C_BUS6 | WDT_RESET_MASK2_I3C_BUS5 |          \
+        WDT_RESET_MASK2_I3C_BUS4 | WDT_RESET_MASK2_I3C_BUS3 |          \
+        WDT_RESET_MASK2_I3C_BUS2 | WDT_RESET_MASK2_I3C_BUS1 |          \
+        WDT_RESET_MASK2_I3C_GLOBAL | WDT_RESET_MASK2_I2C |             \
+        WDT_RESET_MASK2_FSI | WDT_RESET_MASK2_ADC |                    \
+        WDT_RESET_MASK2_PWM | WDT_RESET_MASK2_PECI |                   \
+        WDT_RESET_MASK2_LPC | WDT_RESET_MASK2_MDC_MDIO |               \
+        WDT_RESET_MASK2_GPIO2 | WDT_RESET_MASK2_JTAG2 |                \
+        WDT_RESET_MASK2_SD_SDIO2 | WDT_RESET_MASK2_MAC4 |              \
+        WDT_RESET_MASK2_MAC3 | WDT_RESET_MASK2_SOC |                   \
+        WDT_RESET_MASK2_ARM)
+
+#ifndef __ASSEMBLY__
+struct ast2600_wdt {
+       u32 counter_status;
+       u32 counter_reload_val;
+       u32 counter_restart;
+       u32 ctrl;
+       u32 timeout_status;
+       u32 clr_timeout_status;
+       u32 reset_width;
+       u32 reset_mask1;
+       u32 reset_mask2;
+       u32 sw_reset_ctrl;
+       u32 sw_reset_mask1;
+       u32 sw_reset_mask2;
+       u32 sw_reset_disable;
+};
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_WDT_AST2600_H */
index 4532a40e4587fdfcaf2386efd015d950b8638e59..d5edabf3effb4b93304fc5bd6062c4242986261d 100644 (file)
@@ -86,6 +86,15 @@ config WDT_ASPEED
          It currently does not support Boot Flash Addressing Mode Detection or
          Second Boot.
 
+config WDT_AST2600
+       bool "Aspeed AST2600 watchdog timer support"
+       depends on WDT
+       default y if ASPEED_AST2600
+       help
+         Select this to enable watchdog timer for Aspeed ast2500/ast2400 devices.
+         The watchdog timer is stopped when initialized. It performs reset, either
+         full SoC reset or CPU or just some peripherals, based on the flags.
+
 config WDT_AT91
        bool "AT91 watchdog timer support"
        depends on WDT
index 01b8231f2bf6262f756cd323e0b69066e73b23bd..cbb6d8407cc5935315b858030e5a21ed94926c65 100644 (file)
@@ -19,6 +19,7 @@ obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
 obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
 obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
 obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
+obj-$(CONFIG_WDT_AST2600) += ast2600_wdt.o
 obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
 obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
 obj-$(CONFIG_WDT_ORION) += orion_wdt.o
diff --git a/drivers/watchdog/ast2600_wdt.c b/drivers/watchdog/ast2600_wdt.c
new file mode 100644 (file)
index 0000000..bc98420
--- /dev/null
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Aspeed Technology, Inc
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <wdt.h>
+#include <asm/io.h>
+#include <asm/arch/wdt_ast2600.h>
+#include <linux/err.h>
+
+struct ast2600_wdt_priv {
+       struct ast2600_wdt *regs;
+};
+
+static int ast2600_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+       struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+       struct ast2600_wdt *wdt = priv->regs;
+
+       /* WDT counts in the 1MHz frequency, namely 1us */
+       writel((u32)(timeout_ms * 1000), &wdt->counter_reload_val);
+       writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+       writel(WDT_CTRL_EN | WDT_CTRL_RESET, &wdt->ctrl);
+
+       return 0;
+}
+
+static int ast2600_wdt_stop(struct udevice *dev)
+{
+       struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+       struct ast2600_wdt *wdt = priv->regs;
+
+       clrbits_le32(&wdt->ctrl, WDT_CTRL_EN);
+
+       writel(WDT_RESET_MASK1_DEFAULT, &wdt->reset_mask1);
+       writel(WDT_RESET_MASK2_DEFAULT, &wdt->reset_mask2);
+
+       return 0;
+}
+
+static int ast2600_wdt_reset(struct udevice *dev)
+{
+       struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+       struct ast2600_wdt *wdt = priv->regs;
+
+       writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+
+       return 0;
+}
+
+static int ast2600_wdt_expire_now(struct udevice *dev, ulong flags)
+{
+       int ret;
+       struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+       struct ast2600_wdt *wdt = priv->regs;
+
+       ret = ast2600_wdt_start(dev, 1, flags);
+       if (ret)
+               return ret;
+
+       while (readl(&wdt->ctrl) & WDT_CTRL_EN)
+               ;
+
+       return ast2600_wdt_stop(dev);
+}
+
+static int ast2600_wdt_of_to_plat(struct udevice *dev)
+{
+       struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+
+       priv->regs = dev_read_addr_ptr(dev);
+       if (!priv->regs)
+               return -EINVAL;
+
+       return 0;
+}
+
+static const struct wdt_ops ast2600_wdt_ops = {
+       .start = ast2600_wdt_start,
+       .reset = ast2600_wdt_reset,
+       .stop = ast2600_wdt_stop,
+       .expire_now = ast2600_wdt_expire_now,
+};
+
+static const struct udevice_id ast2600_wdt_ids[] = {
+       { .compatible = "aspeed,ast2600-wdt" },
+       { }
+};
+
+static int ast2600_wdt_probe(struct udevice *dev)
+{
+       debug("%s() wdt%u\n", __func__, dev_seq(dev));
+       ast2600_wdt_stop(dev);
+
+       return 0;
+}
+
+U_BOOT_DRIVER(ast2600_wdt) = {
+       .name = "ast2600_wdt",
+       .id = UCLASS_WDT,
+       .of_match = ast2600_wdt_ids,
+       .probe = ast2600_wdt_probe,
+       .priv_auto = sizeof(struct ast2600_wdt_priv),
+       .of_to_plat = ast2600_wdt_of_to_plat,
+       .ops = &ast2600_wdt_ops,
+};