]> git.dujemihanovic.xyz Git - u-boot.git/shortlog
u-boot.git
2016-12-19 Marek Vasutserial: 16550: Add Ingenic JZ4780 support
2016-12-19 Marek Vasutserial: 16550: Add port type as driver data
2016-12-19 Marek Vasutserial: 16550: Add getfcr accessor
2016-12-18 Tom RiniMerge branch 'master' of git://www.denx.de/git/u-boot-imx
2016-12-16 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2016-12-16 Tom RiniMerge git://git.denx.de/u-boot-fsl-qoriq
2016-12-16 Jagan Tekiimx6: icorem6_rqs: Add FEC support
2016-12-16 Jagan Tekiarm: dts: imx6qdl-icore-rqs: Add FEC node
2016-12-16 Jagan Tekiimx6: geam6ul: Add FEC support
2016-12-16 Jagan Tekiarm: dts: imx6ul-geam: Add FEC node
2016-12-16 Jagan Tekiimx6: icorem6_rqs: Add I2C support
2016-12-16 Jagan Tekiarm: dts: imx6qdl-icore-rqs: Add I2C node's
2016-12-16 Jagan Tekiimx6: icorem6: Rename engicam icorem6 defconfig files
2016-12-16 Jagan Tekiarm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS...
2016-12-16 Jagan Tekiarm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter...
2016-12-16 Jagan Tekiimx6: geam6ul: Add default mtd nand partition table
2016-12-16 Jagan Tekiimx6: geam6ul: Enable MTD device support
2016-12-16 Jagan Tekiimx6: geam6ul: Add NAND support
2016-12-16 Jagan Tekiimx6: geam6ul: Add I2C support
2016-12-16 Jagan Tekiarm: dts: imx6ul-geam: Add I2C nodes
2016-12-16 Jagan Tekiarm: imx6ul: Add Engicam GEAM6UL Starter Kit initial...
2016-12-16 Jagan Tekiarm: dts: Add devicetree for i.MX6UL
2016-12-16 Jagan Tekiimx6: icorem6: Add I2C support
2016-12-16 Jagan Tekii2c: mxc: Make 'no gpio pinctrl state' print as debug
2016-12-16 Jagan Tekii2c: mxc: Print hex instead of decimal for bus address
2016-12-16 Jagan Tekii2c: Kconfig: Add SYS_I2C_MXC entry
2016-12-16 Jagan Tekiimx6: icorem6: Add custom splashscreen support
2016-12-16 Jagan Tekiimx6: icorem6: Add framebuffer support
2016-12-16 Jagan Tekivideo: Kconfig: Add VIDEO_IPV3 entry
2016-12-16 Jagan Tekiicorem6: Use CONFIG_DM_ETH support
2016-12-16 Jagan TekiARM: dts: imx6qdl-icore: Add FEC support
2016-12-16 Jagan Tekidm: net: fec: Add .read_rom_hwaddr
2016-12-16 Jagan Tekinet: fec_mxc: Driver cleanups
2016-12-16 Jagan Tekinet: fec_mxc: Convert into driver model
2016-12-16 Jagan Tekinet: fec_mxc: Remove unneeded eth_device arg from fec_g...
2016-12-16 Fabio EstevamKconfig: Move USE_ARCH_MEMCPY/MEMSET to Kconfig
2016-12-16 Patrick Bruennarm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
2016-12-16 Peng Fanimx: mx6sllevk: add plugin support
2016-12-16 Peng Fanarm: imx: add i.MX6SLL EVK board support
2016-12-16 Peng Fanarm: dts: add i.MX6SLL device tree
2016-12-16 Peng Fanpinctrl: imx6: support i.MX6SLL
2016-12-16 Peng Fanimx-common: lcdif: update lcdif regs for i.MX6SL/SLL
2016-12-16 Peng FanOCOTP: Update OCOTP driver to support i.MX6SLL
2016-12-16 Peng Fanmx6_common: correct loadaddr and text base for i.MX6SLL
2016-12-16 Peng Fanimx: mx6sll: add Kconfig entry for i.MX6SLL
2016-12-16 Peng Fanimx-common: cache: configure L2 Cache for i.MX6SLL
2016-12-16 Peng Fanimx: mx6sll: add clock support
2016-12-16 Peng Fanimx: clock: gate clk before changing pix clk mux
2016-12-16 Peng Fanimx: mx6sl: add lcdif clock support
2016-12-16 Peng Fanimx: mx6: lcdif: gate clock before changing mux
2016-12-16 Peng Fanimx: mx6: fix mmdc ch0 clk for 6SL
2016-12-16 Peng Fanimx: mx6sll: add iomux settings
2016-12-16 Peng Fanimx-common: timer: add i.MX6SLL support
2016-12-16 Peng Fanimx: mx6sll: update register address
2016-12-16 Peng Fanimx: mx6sll: add pinmux header files
2016-12-16 Peng Fanimx: add i.MX 6SLL CPU type
2016-12-16 Sanchayan Maityconfigs: colibri_vf: Add fdt_fixup environment variable
2016-12-16 Marcin Niestrojboard/liteboard: Add support for liteBoard
2016-12-16 Marcin NiestrojARM: imx6ul: Add support for liteSOM
2016-12-16 Breno Limaudoo_neo: Add Ethernet support
2016-12-16 Breno Limaudoo_neo: Add PFUZE300 PMIC support
2016-12-16 Breno Limapower: pmic: Add Voltage configuration macro
2016-12-16 Breno Limaudoo_neo: Add thermal support
2016-12-16 Breno Limaudoo_neo: Remove console option
2016-12-16 Breno Limaudoo_neo: Remove mmcautodetect option
2016-12-16 Breno Limaudoo_neo: Staticize board_string()
2016-12-16 Breno Limaudoo_neo: Move MX6SX configuration to Kconfig
2016-12-16 Breno Limaudoo_neo: Remove USDHC3 support
2016-12-16 Max Krummenacherarm: imx: initial support for colibri imx6
2016-12-16 Max Krummenacherarm: imx: initial support for apalis imx6
2016-12-16 Stefan AgnerARM: dts: vf: Fix warning about missing reg property
2016-12-16 Stefan Agnercolibri_vf: use same NAND clock as Linux uses
2016-12-16 Stefan Agnercolibri_vf: cleanup USB clock initialization
2016-12-16 Stefan Agnercolibri_vf: use device-tree for MTD partitions
2016-12-16 Stefan Agnertoradex: allow custom fdt board setup in board file
2016-12-16 Stefan Agnertoradex: fix USB Download gadget fixup callback
2016-12-16 Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot
2016-12-15 macro.wave... ARMv8: LS1043A: Enable LS1043A default PSCI support
2016-12-15 macro.wave... ARMv8: Setup PSCI memory and device tree
2016-12-15 macro.wave... ARMv8: Add basic PSCI framework
2016-12-15 macro.wave... ARMv8: Enable SMC instruction
2016-12-15 macro.wave... ARMv8: Add secure sections for PSCI text and data
2016-12-15 macro.wave... ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
2016-12-15 Priyanka Jaindriver: fsl-mc: qbman: Add QBMAN 4.1 support
2016-12-15 Hou Zhiqiangarmv8: ls1043a: dts: Fix the ranges table of IFC node
2016-12-15 Hou Zhiqiangarmv8: ls1043ardb: dts: Fix the unit-address of some...
2016-12-15 Shengzhou Liufsl/board/ddr: optimize board-specific cpo for erratum...
2016-12-15 Shengzhou Liufsl/ddr: Enable erratum-a009942 workaround for B/T...
2016-12-15 Cyrille PitchenRevert "sf: Fix quad bit set for micron devices"
2016-12-15 Phil Edworthysf: Do not force the DT memory map size to exactly...
2016-12-15 Fabien Parentmtd: spi: don't return -1 when scan succeed
2016-12-15 Phil Edworthyspi: cadence_qspi: Move DT prop code to match layout
2016-12-15 Phil Edworthyspi: cadence_qspi: Fix CS timings
2016-12-15 Phil Edworthyspi: cadence_qspi: Remove returns from end of void...
2016-12-15 Phil Edworthyspi: cadence_qspi: Use spi mode at the point it is...
2016-12-15 Phil Edworthyspi: cadence_qspi: Clean up the #define names
2016-12-15 Phil Edworthyspi: cadence_qspi: Use #define for bits instead of...
2016-12-15 Phil Edworthyspi: cadence_qspi: Better debug information on the...
2016-12-15 Phil Edworthyspi: cadence_qspi: Fix baud rate calculation
2016-12-15 Phil Edworthyspi: cadence_qspi: Fix clearing of pol/pha bits
next