From 37bfd9cb50b829be07ebf8e6634bb3b5457b4a79 Mon Sep 17 00:00:00 2001 From: Niel Fourie Date: Thu, 21 Jan 2021 13:19:20 +0100 Subject: [PATCH] PowerPC: keymile: Add support for kmcent2 board Add basic support for the Hitachi Power Grids kmcent2 board, based on the NXP QorIQ T1040 SoC. Signed-off-by: Valentin Longchamp Signed-off-by: Rainer Boschung Signed-off-by: Niel Fourie Cc: Holger Brunck Cc: Heiko Schocher Reviewed-by: Stefan Roese [Fixed blank line at EOF errors] Signed-off-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 4 + arch/powerpc/dts/Makefile | 1 + arch/powerpc/dts/kmcent2-u-boot.dtsi | 97 +++++ board/keymile/Kconfig | 1 + board/keymile/common/ivm.c | 5 + board/keymile/kmcent2/Kconfig | 17 + board/keymile/kmcent2/MAINTAINERS | 8 + board/keymile/kmcent2/Makefile | 14 + board/keymile/kmcent2/ddr.c | 88 +++++ board/keymile/kmcent2/kmcent2.c | 353 ++++++++++++++++++ board/keymile/kmcent2/law.c | 23 ++ board/keymile/kmcent2/tlb.c | 104 ++++++ configs/kmcent2_defconfig | 92 +++++ include/configs/kmcent2.h | 513 +++++++++++++++++++++++++++ 14 files changed, 1320 insertions(+) create mode 100644 arch/powerpc/dts/kmcent2-u-boot.dtsi create mode 100644 board/keymile/kmcent2/Kconfig create mode 100644 board/keymile/kmcent2/MAINTAINERS create mode 100644 board/keymile/kmcent2/Makefile create mode 100644 board/keymile/kmcent2/ddr.c create mode 100644 board/keymile/kmcent2/kmcent2.c create mode 100644 board/keymile/kmcent2/law.c create mode 100644 board/keymile/kmcent2/tlb.c create mode 100644 configs/kmcent2_defconfig create mode 100644 include/configs/kmcent2.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 54c7fd9522..c1a3770671 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -256,6 +256,10 @@ config TARGET_KMP204X bool "Support kmp204x" select VENDOR_KM +config TARGET_KMCENT2 + bool "Support kmcent2" + select VENDOR_KM + config TARGET_XPEDITE520X bool "Support xpedite520x" select ARCH_MPC8548 diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index 266d345f72..3ecda36538 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ +dtb-$(CONFIG_TARGET_KMCENT2) += kmcent2.dtb dtb-$(CONFIG_TARGET_KMCOGE5NE) += kmcoge5ne.dtb dtb-$(CONFIG_TARGET_KMETER1) += kmeter1.dtb dtb-$(CONFIG_TARGET_KMOPTI2) += kmopti2.dtb diff --git a/arch/powerpc/dts/kmcent2-u-boot.dtsi b/arch/powerpc/dts/kmcent2-u-boot.dtsi new file mode 100644 index 0000000000..ab76a9f122 --- /dev/null +++ b/arch/powerpc/dts/kmcent2-u-boot.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2021 Niel Fourie + */ + +#include + +/ { + + aliases { + spi0 = "/soc@ffe000000/spi@110000"; + i2c0 = "/soc@ffe000000/i2c@118000"; + i2c1 = "/soc@ffe000000/i2c@118000/mux@70/i2c@0"; + i2c2 = "/soc@ffe000000/i2c@118000/mux@70/i2c@1"; + i2c3 = "/soc@ffe000000/i2c@118000/mux@70/i2c@7"; + i2c4 = "/soc@ffe000000/i2c@118100"; + /delete-property/ pci1; + /delete-property/ pci2; + /delete-property/ pci3; + }; + + chosen { + stdout-path = "/soc@ffe000000/serial@11c500"; + }; + + soc@ffe000000 { + u-boot,dm-pre-reloc; + spi@110000 { + /* This documents where km_fpgacfg should be appear */ + fpga@0 { + compatible = "keymile,fpga-conf"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + }; + + sdhc@114000 { + status = "okay"; + }; + + i2c@118000 { + u-boot,dm-pre-reloc; + mux@70 { + i2c@1 { /* IVM bus */ + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + serial@11c500 { + u-boot,dm-pre-reloc; + clock-frequency = <200000000>; + }; + + fman@400000 { + ethernet@e0000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + phy-connection-type = "rgmii-id"; + }; + }; + + }; + + pcie@ffe240000 { + compatible = "fsl,pcie-t104x"; + law_trgt_if = <0>; + }; + + binman { + filename = "u-boot-with-dtb.bin"; + skip-at-start = ; + sort-by-offset; + pad-byte = <0xff>; + size = ; + + u-boot-with-ucode-ptr { + offset = ; + optional-ucode; + }; + + u-boot-dtb-with-ucode { + align = <256>; + }; + powerpc-mpc85xx-bootpg-resetvec { + offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>; + }; + }; +}; diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index e5906906f3..6b7377c200 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -114,6 +114,7 @@ config SYS_IVM_EEPROM_PAGE_LEN Page size of inventory in EEPROM. source "board/keymile/km83xx/Kconfig" +source "board/keymile/kmcent2/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/keymile/km_arm/Kconfig" diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index e989bf609f..bc8ffd56e1 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -321,6 +321,11 @@ static int ivm_populate_env(unsigned char *buf, int len, int mac_address_offset) process_mac(valbuf, page2, mac_address_offset, true); env_set((char *)"eth1addr", (char *)valbuf); } + if (IS_ENABLED(CONFIG_TARGET_KMCENT2)) { + /* 3rd ethernet interface */ + process_mac(valbuf, page2, 2, true); + env_set((char *)"eth4addr", (char *)valbuf); + } return 0; } diff --git a/board/keymile/kmcent2/Kconfig b/board/keymile/kmcent2/Kconfig new file mode 100644 index 0000000000..848d230fbd --- /dev/null +++ b/board/keymile/kmcent2/Kconfig @@ -0,0 +1,17 @@ +if TARGET_KMCENT2 + +config SYS_BOARD + default "kmcent2" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmcent2" + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select ARCH_T1040 + select PHYS_64BIT + +endif diff --git a/board/keymile/kmcent2/MAINTAINERS b/board/keymile/kmcent2/MAINTAINERS new file mode 100644 index 0000000000..1426475556 --- /dev/null +++ b/board/keymile/kmcent2/MAINTAINERS @@ -0,0 +1,8 @@ +KMCENT2 BOARD +M: Niel Fourie +S: Maintained +F: board/keymile/kmcent2/ +F: include/configs/kmcent2.h +F: configs/kmcent2_defconfig +F: arch/powerpc/dts/kmcent2.dts +F: arch/powerpc/dts/kmcent2-u-boot.dtsi diff --git a/board/keymile/kmcent2/Makefile b/board/keymile/kmcent2/Makefile new file mode 100644 index 0000000000..6b26e861f6 --- /dev/null +++ b/board/keymile/kmcent2/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2016 Keymile AG +# Rainer Boschung +# +# Copyright 2013 Freescale Semiconductor, Inc. +# + +obj-y += kmcent2.o +obj-y += ddr.o +obj-y += law.o +obj-y += tlb.o +obj-y += ../common/common.o +obj-y += ../common/ivm.o +obj-y += ../common/qrio.o diff --git a/board/keymile/kmcent2/ddr.c b/board/keymile/kmcent2/ddr.c new file mode 100644 index 0000000000..4f778206fe --- /dev/null +++ b/board/keymile/kmcent2/ddr.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Keymile AG + * Rainer Boschung + * + * Copyright 2013 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define DQSn_POS(n) (3 - (((n) - 1) % 4)) * 8 +#define DQSn_START(n, start) ((start) << DQSn_POS(n)) + +void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + if (ctrl_num > 1) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + + /* 1/2 clk delay between wr command and data strobe */ + popts->write_data_delay = 4; + /* clk lauched 1/2 applied cylcle after address command */ + popts->clk_adjust = 4; + /* 1T timing: command/address held for only 1 cycle */ + popts->twot_en = 0; + popts->threet_en = 0; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x3b; + + /* we have only one module, half str should be OK */ + popts->half_strength_driver_enable = 1; + /* + * Write leveling override + */ + /* set for DDR3-1600 */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + popts->wrlvl_start = 0x7; + /* DQS write leveling start time according layout */ + popts->wrlvl_ctl_2 = (DQSn_START(1, 0x06) | + DQSn_START(2, 0x06) | + DQSn_START(3, 0x07) | + DQSn_START(4, 0x07)); + popts->wrlvl_ctl_3 = (DQSn_START(5, 0x07) | + DQSn_START(6, 0x08) | + DQSn_START(7, 0x08) | + DQSn_START(8, 0x08)); + + /* + * rtt and wtt_wr override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +int dram_init(void) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + gd->ram_size = dram_size; + + return 0; +} diff --git a/board/keymile/kmcent2/kmcent2.c b/board/keymile/kmcent2/kmcent2.c new file mode 100644 index 0000000000..4f5164e63c --- /dev/null +++ b/board/keymile/kmcent2/kmcent2.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Keymile AG + * Rainer Boschung + * + * Copyright 2013 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/common.h" +#include "../common/qrio.h" + +DECLARE_GLOBAL_DATA_PTR; + +static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; + +int checkboard(void) +{ + printf("Board: Hitachi Power Grids %s\n", KM_BOARD_NAME); + + return 0; +} + +#define RSTRQSR1_WDT_RR 0x00200000 +#define RSTRQSR1_SW_RR 0x00100000 + +int board_early_init_f(void) +{ + struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + bool cpuwd_flag = false; + + /* board specific IFC configuration: increased bus turnaround time */ + setbits_be32(&ifc.gregs->ifc_gcr, 8 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + + /* configure mode for uP reset request */ + qrio_uprstreq(UPREQ_CORE_RST); + + /* board only uses the DDR_MCK0, so disable the DDR_MCK1 */ + setbits_be32(&gur->ddrclkdr, 0x40000000); + + /* set reset reason according CPU register */ + if ((gur->rstrqsr1 & (RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR)) == + RSTRQSR1_WDT_RR) + cpuwd_flag = true; + + qrio_cpuwd_flag(cpuwd_flag); + /* clear CPU bits by writing 1 */ + setbits_be32(&gur->rstrqsr1, RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR); + + /* configure PRST lines for the application: */ + /* + * ETHSW_DDR_RST: + * reset at power-up and unit reset only and enable WD on it + */ + qrio_prstcfg(KM_ETHSW_DDR_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_ETHSW_DDR_RST, true); + /* + * XES_PHY_RST: + * reset at power-up and unit reset only and enable WD on it + */ + qrio_prstcfg(KM_XES_PHY_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_XES_PHY_RST, true); + /* + * ES_PHY_RST: + * reset at power-up and unit reset only and enable WD on it + */ + qrio_prstcfg(KM_ES_PHY_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_ES_PHY_RST, true); + /* + * EFE_RST: + * reset at power-up and unit reset only and enable WD on it + */ + qrio_prstcfg(KM_EFE_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_EFE_RST, true); + /* + * BFTIC4_RST: + * reset at power-up and unit reset only and enable WD on it + */ + qrio_prstcfg(KM_BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_BFTIC4_RST, true); + /* + * DPAXE_RST: + * reset at power-up and unit reset only and enable WD on it + */ + qrio_prstcfg(KM_DPAXE_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_DPAXE_RST, true); + /* + * PEXSW_RST: + * reset at power-up and unit reset only, deassert reset w/o WD + */ + qrio_prstcfg(KM_PEXSW_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_prst(KM_PEXSW_RST, false, false); + /* + * PEXSW_NT_RST: + * reset at power-up and unit reset only, deassert reset w/o WD + */ + qrio_prstcfg(KM_PEXSW_NT_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_prst(KM_PEXSW_NT_RST, false, false); + /* + * BOBCAT_RST: + * reset at power-up and unit reset only, deassert reset w/o WD + */ + qrio_prstcfg(KM_BOBCAT_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_prst(KM_BOBCAT_RST, false, false); + /* + * FEMT_RST: + * reset at power-up and unit reset only and enable WD + */ + qrio_prstcfg(KM_FEMT_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_FEMT_RST, true); + /* + * FOAM_RST: + * reset at power-up and unit reset only and enable WD + */ + qrio_prstcfg(KM_FOAM_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_FOAM_RST, true); + + return 0; +} + +int board_early_init_r(void) +{ + int ret = 0; + + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + int flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); + setup_qbman_portals(); + + qrio_set_leds(); + + /* enable Application Buffer */ + qrio_enable_app_buffer(); + + return ret; +} + +unsigned long get_serial_clock(unsigned long dummy) +{ + return (gd->bus_clk / 2); +} + +unsigned long get_board_sys_clk(unsigned long dummy) +{ + return 66666666; +} + +int misc_init_f(void) +{ + /* configure QRIO pis for i2c deblocking */ + i2c_deblock_gpio_cfg(); + + /* + * CFE_RST (front phy): + * reset at power-up, unit and core reset, deasset reset w/o WD + */ + qrio_prstcfg(KM_CFE_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + qrio_prst(KM_CFE_RST, false, false); + + /* + * ZL30158_RST (PTP clock generator): + * reset at power-up only, deassert reset and enable WD on it + */ + qrio_prstcfg(KM_ZL30158_RST, PRSTCFG_POWUP_RST); + qrio_prst(KM_ZL30158_RST, false, false); + + /* + * ZL30364_RST (EEC generator): + * reset at power-up only, deassert reset and enable WD on it + */ + qrio_prstcfg(KM_ZL30364_RST, PRSTCFG_POWUP_RST); + qrio_prst(KM_ZL30364_RST, false, false); + + return 0; +} + +#define USED_SRDS_BANK 0 +#define EXPECTED_SRDS_RFCK SRDS_PLLCR0_RFCK_SEL_100 + +#define BRG01_IOCLK12 0x02000000 +#define EC2_GTX_CLK125 0x08000000 + +int misc_init_r(void) +{ + serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_MPC85xx_SCFG; + ccsr_gur_t __iomem *gur = (ccsr_gur_t __iomem *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* check SERDES bank 0 reference clock */ + u32 actual = in_be32(®s->bank[USED_SRDS_BANK].pllcr0); + + if (actual & SRDS_PLLCR0_POFF) + printf("Warning: SERDES bank %u pll is off\n", USED_SRDS_BANK); + if ((actual & SRDS_PLLCR0_RFCK_SEL_MASK) != EXPECTED_SRDS_RFCK) { + printf("Warning: SERDES bank %u expects %sMHz clock, is %sMHz\n", + USED_SRDS_BANK, + serdes_clock_to_string(EXPECTED_SRDS_RFCK), + serdes_clock_to_string(actual)); + } + + /* QE IO clk : BRG01 is used over clk12 for HDLC clk (20 MhZ) */ + out_be32(&scfg->qeioclkcr, + in_be32(&scfg->qeioclkcr) | BRG01_IOCLK12); + + ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN, + CONFIG_PIGGY_MAC_ADDRESS_OFFSET); + + /* Fix polarity of Card Detect and Write Protect */ + out_be32(&gur->sdhcpcr, 0xFFFFFFFF); + + /* + * EC1 is disabled in our design, so we must explicitly set GTXCLKSEL + * to EC2 + */ + out_be32(&scfg->emiiocr, in_be32(&scfg->emiiocr) | EC2_GTX_CLK125); + + return 0; +} + +int hush_init_var(void) +{ + ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); + return 0; +} + +int last_stage_init(void) +{ + const char *kmem; + /* DIP switch support on BFTIC */ + struct bfticu_iomap *bftic4 = + (struct bfticu_iomap *)SYS_BFTIC_BASE; + u8 dip_switch = in_8((u8 *)&bftic4->mswitch) & BFTICU_DIPSWITCH_MASK; + + if (dip_switch != 0) { + /* start bootloader */ + puts("DIP: Enabled\n"); + env_set("actual_bank", "0"); + } + + set_km_env(); + + /* + * bootm_size is used to fixup the FDT memory node + * set it to kernelmem that has the same value + */ + kmem = env_get("kernelmem"); + if (kmem) + env_set("bootm_size", kmem); + + return 0; +} + +void fdt_fixup_fman_mac_addresses(void *blob) +{ + int node, ret; + char path[24]; + unsigned char mac_addr[6]; + + /* + * Just the fm1-mac5 must be set by us, u-boot handle the 2 others, + * get the mac addr from env + */ + if (!eth_env_get_enetaddr_by_index("eth", 4, mac_addr)) { + printf("eth4addr env variable not defined\n"); + return; + } + + /* local management port */ + strcpy(path, "/soc/fman/ethernet@e8000"); + node = fdt_path_offset(blob, path); + if (node < 0) { + printf("no %s\n", path); + return; + } + + ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6); + if (ret) { + printf("%s\n\terror setting local-mac-address property\n", + path); + } +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = env_get_bootm_low(); + size = env_get_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + fdt_fixup_liodn(blob); + + fdt_fixup_fman_mac_addresses(blob); + + if (hwconfig("qe-tdm")) + fdt_del_diu(blob); + return 0; +} + +/* DIC26_SELFTEST GPIO used to start factory test sw */ +#define SELFTEST_PORT QRIO_GPIO_A +#define SELFTEST_PIN 0 + +int post_hotkeys_pressed(void) +{ + qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN); + return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN); +} diff --git a/board/keymile/kmcent2/law.c b/board/keymile/kmcent2/law.c new file mode 100644 index 0000000000..aa0f29f44f --- /dev/null +++ b/board/keymile/kmcent2/law.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Keymile AG + * Rainer Boschung + * + * Copyright 2013 Freescale Semiconductor, Inc. + */ + +#include +#include + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_QRIO_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), + SET_LAW(SYS_LAWAPP_BASE_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_IFC), +/* other application LAW are not used in u-boot */ +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/keymile/kmcent2/tlb.c b/board/keymile/kmcent2/tlb.c new file mode 100644 index 0000000000..dbd3b9b064 --- /dev/null +++ b/board/keymile/kmcent2/tlb.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Keymile AG + * Rainer Boschung + * + * Copyright 2013 Freescale Semiconductor, Inc. + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX | MAS3_SR, MAS2_W | MAS2_G, + 0, 2, BOOKE_PAGESZ_128M, 1), + + /* *I*G* - PCI1 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI1 I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 5, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 6, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 8, BOOKE_PAGESZ_16M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 9, BOOKE_PAGESZ_4M, 1), + + /* *I*G - NAND */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 10, BOOKE_PAGESZ_64K, 1), + /* QRIO */ + SET_TLB_ENTRY(1, CONFIG_SYS_QRIO_BASE, CONFIG_SYS_QRIO_BASE_PHYS, + MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 11, BOOKE_PAGESZ_64K, 1), + /* MRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_MRAM_BASE, SYS_MRAM_BASE_PHYS, + MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 12, BOOKE_PAGESZ_128M, 1), + /* BFTIC */ + SET_TLB_ENTRY(1, SYS_BFTIC_BASE, SYS_BFTIC_BASE_PHYS, + MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 13, BOOKE_PAGESZ_128M, 1), + /* + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so do not use them here!!. + */ + /* PAXE */ + SET_TLB_ENTRY(1, CONFIG_SYS_PAXE_BASE, SYS_PAXE_BASE_PHYS, + MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 16, BOOKE_PAGESZ_128M, 1) +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig new file mode 100644 index 0000000000..a34bb08432 --- /dev/null +++ b/configs/kmcent2_defconfig @@ -0,0 +1,92 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xebf40000 +CONFIG_SYS_MALLOC_F_LEN=0x1000 +CONFIG_KM_DEF_NETDEV="eth2" +CONFIG_KM_IVM_BUS=2 +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020 +CONFIG_DEFAULT_DEVICE_TREE="kmcent2" +CONFIG_MPC85xx=y +CONFIG_TARGET_KMCENT2=y +CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_DM=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_NAND_TRIMFFS=y +# CONFIG_CMD_SATA is not set +CONFIG_CMD_SPI=y +CONFIG_CMD_PING=y +CONFIG_CMD_ETHSW=y +CONFIG_MP=y +CONFIG_CMD_CRAMFS=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=ffa000000.flash" +CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:128k(RCW),128k(fman),128k(QE),128k(zarlink),512k(res),62m(ubi0),128k(envred),128k(env),768k(u-boot);ffa000000.flash:-(ubi1);" +CONFIG_CMD_UBI=y +# CONFIG_CMD_UBIFS is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_ENV_ADDR=0xebf20000 +CONFIG_ENV_ADDR_REDUND=0xebf00000 +CONFIG_DM=y +# CONFIG_FSL_SATA is not set +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_FSL_CAAM=y +CONFIG_SYS_FSL_DDR3=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_FSL=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_CFI_FLASH=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_MTD_RAW_NAND=y +CONFIG_PHYLIB=y +CONFIG_PHYLIB_10G=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_FMAN_ENET=y +CONFIG_RGMII=y +CONFIG_MII=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCI_REGION_MULTI_ENTRY=y +CONFIG_PCIE_FSL=y +CONFIG_U_QE=y +CONFIG_SYS_QE_FMAN_FW_IN_NOR=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SPI_MEM=y +CONFIG_FSL_ESPI=y +CONFIG_WATCHDOG=y +CONFIG_FS_CRAMFS=y +CONFIG_BCH=y +CONFIG_PANIC_HANG=y +CONFIG_LZO=y diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h new file mode 100644 index 0000000000..51a01d860f --- /dev/null +++ b/include/configs/kmcent2.h @@ -0,0 +1,513 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2016 Keymile AG + * Rainer Boschung + * + */ + +#ifndef __KMCENT2_H +#define __KMCENT2_H + +#define CONFIG_HOSTNAME "kmcent2" +#define KM_BOARD_NAME CONFIG_HOSTNAME + +/* + * The Linux fsl_fman driver needs to be able to process frames with more + * than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot + * parameters + */ +#define CONFIG_KM_DEF_BOOT_ARGS_CPU "fsl_dpaa_fman.fsl_fm_max_frm=1558" + +#include "km/keymile-common.h" + +/* Application IFC chip selects */ +#define SYS_LAWAPP_BASE 0xc0000000 +#define SYS_LAWAPP_BASE_PHYS (0xf00000000ull | SYS_LAWAPP_BASE) + +/* Application IFC CS4 MRAM */ +#define CONFIG_SYS_MRAM_BASE SYS_LAWAPP_BASE +#define SYS_MRAM_BASE_PHYS SYS_LAWAPP_BASE_PHYS +#define SYS_MRAM_CSPR_EXT (0x0f) +#define SYS_MRAM_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_MRAM_BASE) | \ + CSPR_PORT_SIZE_8 | /* 8 bit */ \ + CSPR_MSEL_GPCM | /* msel = gpcm */ \ + CSPR_V /* bank is valid */) +#define SYS_MRAM_AMASK IFC_AMASK(2 * 1024 * 1024) /* 2 MiB */ +#define SYS_MRAM_CSOR CSOR_GPCM_TRHZ_40 +/* MRAM Timing parameters for IFC CS4 */ +#define SYS_MRAM_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ + FTIM0_GPCM_TEADC(0x8) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define SYS_MRAM_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0xe)) +#define SYS_MRAM_FTIM2 (FTIM2_GPCM_TCS(0x2) | \ + FTIM2_GPCM_TCH(0x2) | \ + FTIM2_GPCM_TWP(0x8)) +#define SYS_MRAM_FTIM3 0x04000000 +#define CONFIG_SYS_CSPR4_EXT SYS_MRAM_CSPR_EXT +#define CONFIG_SYS_CSPR4 SYS_MRAM_CSPR +#define CONFIG_SYS_AMASK4 SYS_MRAM_AMASK +#define CONFIG_SYS_CSOR4 SYS_MRAM_CSOR +#define CONFIG_SYS_CS4_FTIM0 SYS_MRAM_FTIM0 +#define CONFIG_SYS_CS4_FTIM1 SYS_MRAM_FTIM1 +#define CONFIG_SYS_CS4_FTIM2 SYS_MRAM_FTIM2 +#define CONFIG_SYS_CS4_FTIM3 SYS_MRAM_FTIM3 + +/* Application IFC CS6: BFTIC */ +#define SYS_BFTIC_BASE 0xd0000000 +#define SYS_BFTIC_BASE_PHYS (0xf00000000ull | SYS_BFTIC_BASE) +#define SYS_BFTIC_CSPR_EXT (0x0f) +#define SYS_BFTIC_CSPR (CSPR_PHYS_ADDR(SYS_BFTIC_BASE) | \ + CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ + CSPR_MSEL_GPCM | /* MSEL = GPCM */\ + CSPR_V) /* valid */ +#define SYS_BFTIC_AMASK IFC_AMASK(64 * 1024) /* 64kB */ +#define SYS_BFTIC_CSOR CSOR_GPCM_TRHZ_40 +/* BFTIC Timing parameters for IFC CS6 */ +#define SYS_BFTIC_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ + FTIM0_GPCM_TEADC(0x8) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define SYS_BFTIC_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0x12)) +#define SYS_BFTIC_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ + FTIM2_GPCM_TCH(0x1) | \ + FTIM2_GPCM_TWP(0x12)) +#define SYS_BFTIC_FTIM3 0x04000000 +#define CONFIG_SYS_CSPR6_EXT SYS_BFTIC_CSPR_EXT +#define CONFIG_SYS_CSPR6 SYS_BFTIC_CSPR +#define CONFIG_SYS_AMASK6 SYS_BFTIC_AMASK +#define CONFIG_SYS_CSOR6 SYS_BFTIC_CSOR +#define CONFIG_SYS_CS6_FTIM0 SYS_BFTIC_FTIM0 +#define CONFIG_SYS_CS6_FTIM1 SYS_BFTIC_FTIM1 +#define CONFIG_SYS_CS6_FTIM2 SYS_BFTIC_FTIM2 +#define CONFIG_SYS_CS6_FTIM3 SYS_BFTIC_FTIM3 + +/* Application IFC CS7 PAXE */ +#define CONFIG_SYS_PAXE_BASE 0xd8000000 +#define SYS_PAXE_BASE_PHYS (0xf00000000ull | CONFIG_SYS_PAXE_BASE) +#define SYS_PAXE_CSPR_EXT (0x0f) +#define SYS_PAXE_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_PAXE_BASE) | \ + CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ + CSPR_MSEL_GPCM | /* MSEL = GPCM */\ + CSPR_V) /* valid */ +#define SYS_PAXE_AMASK IFC_AMASK(64 * 1024) /* 64kB */ +#define SYS_PAXE_CSOR CSOR_GPCM_TRHZ_40 +/* PAXE Timing parameters for IFC CS7 */ +#define SYS_PAXE_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ + FTIM0_GPCM_TEADC(0x8) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define SYS_PAXE_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0x12)) +#define SYS_PAXE_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ + FTIM2_GPCM_TCH(0x1) | \ + FTIM2_GPCM_TWP(0x12)) +#define SYS_PAXE_FTIM3 0x04000000 +#define CONFIG_SYS_CSPR7_EXT SYS_PAXE_CSPR_EXT +#define CONFIG_SYS_CSPR7 SYS_PAXE_CSPR +#define CONFIG_SYS_AMASK7 SYS_PAXE_AMASK +#define CONFIG_SYS_CSOR7 SYS_PAXE_CSOR +#define CONFIG_SYS_CS7_FTIM0 SYS_PAXE_FTIM0 +#define CONFIG_SYS_CS7_FTIM1 SYS_PAXE_FTIM1 +#define CONFIG_SYS_CS7_FTIM2 SYS_PAXE_FTIM2 +#define CONFIG_SYS_CS7_FTIM3 SYS_PAXE_FTIM3 + +/* PRST */ +#define KM_BFTIC4_RST 0 +#define KM_DPAXE_RST 1 +#define KM_FEMT_RST 3 +#define KM_FOAM_RST 4 +#define KM_EFE_RST 5 +#define KM_ES_PHY_RST 6 +#define KM_XES_PHY_RST 7 +#define KM_ZL30158_RST 8 +#define KM_ZL30364_RST 9 +#define KM_BOBCAT_RST 10 +#define KM_ETHSW_DDR_RST 12 +#define KM_CFE_RST 13 +#define KM_PEXSW_RST 14 +#define KM_PEXSW_NT_RST 15 + +/* QRIO GPIOs used for deblocking */ +#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A +#define KM_I2C_DEBLOCK_SCL 20 +#define KM_I2C_DEBLOCK_SDA 21 + +/* High Level Configuration Options */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ + +#define CONFIG_RESET_VECTOR_ADDRESS 0xebfffffc + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +/* Environment in parallel NOR-Flash */ +#define CONFIG_ENV_TOTAL_SIZE 0x040000 +#define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/ + +#define CONFIG_SYS_CLK_FREQ 66666666 + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ENABLE_36BIT_PHYS + +/* POST memory regions test */ +#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CONFIG_SYS_L3_SIZE 256 << 10 + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_DDR_CLK_FREQ 66666666 + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR CONFIG_SYS_IVM_EEPROM_ADR +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/****************************************************************************** + * (PRAM usage) + * ... ------------------------------------------------------- + * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM + * ... |<------------------- pram -------------------------->| + * ... ------------------------------------------------------- + * @END_OF_RAM: + * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose + * @CONFIG_KM_PHRAM: address for /var + * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) + * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM + */ + +/* size of rootfs in RAM */ +#define CONFIG_KM_ROOTFSSIZE 0x0 +/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable + * is not valid yet, which is the case for when u-boot copies itself to RAM + */ +#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10) + +/* + * IFC Definitions + */ +/* NOR flash on IFC CS0 */ +#define CONFIG_SYS_FLASH_BASE 0xe8000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | \ + CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_NOR_CSPR_EXT (0x0f) +#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ + CSPR_PORT_SIZE_16 | /* Port size = 16 bit */\ + 0x00000010 | /* drive TE high */\ + CSPR_MSEL_NOR | /* MSEL = NOR */\ + CSPR_V) /* valid */ +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024) /* 64MB */ +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | /* AVD toggle */\ + CSOR_NOR_TRHZ_20 | \ + CSOR_NOR_BCTLD) + +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x7) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x21) | \ + FTIM1_NOR_TSEQRAD_NOR(0x21)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCH(0x1) | \ + FTIM2_NOR_TCS(0x1) | \ + FTIM2_NOR_TWP(0xb) | \ + FTIM2_NOR_TWPH(0x6)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + +/* More NOR Flash params */ +#define CONFIG_SYS_FLASH_QUIET_TEST + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} + +/* NAND Flash on IFC CS1*/ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xfa000000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0f) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \ + CSPR_PORT_SIZE_8 | /* Port Size = 8 bit */\ + 0x00000010 | /* drive TE high */\ + CSPR_MSEL_NAND | /* MSEL = NAND */\ + CSPR_V) /* valid */ +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) /* 64kB */ + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN | /* ECC encoder on */ \ + CSOR_NAND_ECC_DEC_EN | /* ECC decoder on */ \ + CSOR_NAND_ECC_MODE_4 | /* 4-bit ECC */ \ + CSOR_NAND_RAL_3 | /* RAL = 3Bytes */ \ + CSOR_NAND_PGS_2K | /* Page size = 2K */ \ + CSOR_NAND_SPRZ_128 | /* Spare size = 128 */ \ + CSOR_NAND_PB(64) | /* 64 Pages/Block */ \ + CSOR_NAND_TRHZ_40 | /**/ \ + CSOR_NAND_BCTLD) /**/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \ + FTIM0_NAND_TWP(0x8) | \ + FTIM0_NAND_TWCHT(0x3) | \ + FTIM0_NAND_TWH(0x5)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \ + FTIM1_NAND_TWBE(0x1e) | \ + FTIM1_NAND_TRR(0x6) | \ + FTIM1_NAND_TRP(0x8)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \ + FTIM2_NAND_TREH(0x5) | \ + FTIM2_NAND_TWHRE(0x3c)) +#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e)) + +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + +/* More NAND Flash Params */ +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* QRIO on IFC CS2 */ +#define CONFIG_SYS_QRIO_BASE 0xfb000000 +#define CONFIG_SYS_QRIO_BASE_PHYS (0xf00000000ull | CONFIG_SYS_QRIO_BASE) +#define SYS_QRIO_CSPR_EXT (0x0f) +#define SYS_QRIO_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \ + CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ + 0x00000010 | /* drive TE high */\ + CSPR_MSEL_GPCM | /* MSEL = GPCM */\ + CSPR_V) /* valid */ +#define SYS_QRIO_AMASK IFC_AMASK(64 * 1024) /* 64kB */ +#define SYS_QRIO_CSOR (CSOR_GPCM_TRHZ_20 |\ + CSOR_GPCM_BCTLD) +/* QRIO Timing parameters for IFC CS2 */ +#define SYS_QRIO_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \ + FTIM0_GPCM_TEADC(0x8) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define SYS_QRIO_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0x6)) +#define SYS_QRIO_FTIM2 (FTIM2_GPCM_TCS(0x1) | \ + FTIM2_GPCM_TCH(0x1) | \ + FTIM2_GPCM_TWP(0x7)) +#define SYS_QRIO_FTIM3 0x04000000 +#define CONFIG_SYS_CSPR2_EXT SYS_QRIO_CSPR_EXT +#define CONFIG_SYS_CSPR2 SYS_QRIO_CSPR +#define CONFIG_SYS_AMASK2 SYS_QRIO_AMASK +#define CONFIG_SYS_CSOR2 SYS_QRIO_CSOR +#define CONFIG_SYS_CS2_FTIM0 SYS_QRIO_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 SYS_QRIO_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3 + +#define CONFIG_MISC_INIT_F +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_LEN 0xc0000 /* 768k */ + +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* + * Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + * Retain non-DM serial port for debug purposes. + */ +#if !defined(CONFIG_DM_SERIAL) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x11C500) +#endif + +#ifndef __ASSEMBLY__ +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#endif + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +/* controller 1 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull + +#define CONFIG_SYS_BMAN_NUM_PORTALS 10 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ + CONFIG_SYS_BMAN_CENA_SIZE) +#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CONFIG_SYS_QMAN_NUM_PORTALS 10 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ + CONFIG_SYS_QMAN_CENA_SIZE) +#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME + +/* Default address of microcode for the Linux Fman driver */ +#define CONFIG_SYS_FMAN_FW_ADDR 0xE8020000 +#define CONFIG_SYS_QE_FW_ADDR 0xE8040000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + +/* Qman / Bman */ +/* RGMII (FM1@DTESC5) is local managemant interface */ +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x11 +#define CONFIG_ETHPRIME "fm1-mac5" + +/* + * Hardware Watchdog + */ +#define CONFIG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) ~10min */ +#define CONFIG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV +#endif + +#define __USB_PHY_TYPE utmi + +#define CONFIG_KM_DEF_ENV_CPU \ + "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ + "cramfsloadfdt=" \ + "cramfsload ${fdt_addr_r} " \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ + "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ + "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize} && " \ + "erase " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize} && " \ + "cp.b ${load_addr_r} " \ + __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ + "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize}\0" \ + "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \ + " +${filesize} && " \ + "erase " __stringify(CONFIG_SYS_FLASH_BASE) \ + " +${filesize} && " \ + "cp.b ${load_addr_r} " \ + __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \ + "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0" \ + "set_fdthigh=true\0" \ + "checkfdt=true\0" \ + "fpgacfg=true\0" \ + "" + +#define CONFIG_HW_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ + "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ + "usb_dr_mode=host\0" + +#define CONFIG_KM_NEW_ENV \ + "newenv=protect off " __stringify(ENV_DEL_ADDR) \ + " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ + "erase " __stringify(ENV_DEL_ADDR) \ + " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ + "protect on " __stringify(ENV_DEL_ADDR) \ + " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0" + +/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ +#ifndef CONFIG_KM_DEF_ARCH +#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + CONFIG_KM_DEF_ARCH \ + CONFIG_KM_NEW_ENV \ + CONFIG_HW_ENV_SETTINGS \ + "EEprom_ivm=pca9547:70:9\0" \ + "" + +#endif /* __KMCENT2_H */ -- 2.39.5