From 2798e4a5b449deab3ccba067f4adce839b814cd9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 14 Aug 2024 15:28:44 -0300 Subject: [PATCH] tqma6_mba6: Remove unused defines The PAD_CTRL definitions are not used anywhere. Remove them to make the code cleaner. Signed-off-by: Fabio Estevam --- board/tq/tqma6/tqma6_mba6.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/board/tq/tqma6/tqma6_mba6.c b/board/tq/tqma6/tqma6_mba6.c index 877539e359..7267d812e7 100644 --- a/board/tq/tqma6/tqma6_mba6.c +++ b/board/tq/tqma6/tqma6_mba6.c @@ -34,25 +34,6 @@ #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define GPIO_OUT_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define GPIO_IN_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - #if defined(CONFIG_TQMA6Q) #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII 0x02e0790 -- 2.39.5