From: Marek Mojík Date: Tue, 19 Dec 2023 09:55:55 +0000 (+0100) Subject: arm: mvebu: turris_omnia: Enable networking via ethernet switch X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=f56591d326f11b35321c19495bf97049fd26fd8c;p=u-boot.git arm: mvebu: turris_omnia: Enable networking via ethernet switch The Turris Omnia contains the Marvell 88E6176 ethernet switch. Add config options and device tree to enable the support. Signed-off-by: Marek Mojík Signed-off-by: Marek Behún --- diff --git a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi index 509d6ca69c..c63a331d69 100644 --- a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi +++ b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi @@ -35,6 +35,57 @@ }; }; +&mdio { + switch@10 { + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + ports { + ports@0 { + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + }; + ports@1 { + phy-handle = <&sw_phy1>; + phy-mode = "internal"; + }; + ports@2 { + phy-handle = <&sw_phy2>; + phy-mode = "internal"; + }; + ports@3 { + phy-handle = <&sw_phy3>; + phy-mode = "internal"; + }; + ports@4 { + phy-handle = <&sw_phy4>; + phy-mode = "internal"; + }; + }; + }; +}; + #ifdef CONFIG_ENV_IS_IN_SPI_FLASH &spi0 { flash@0 { diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index f045dd7430..29148402a1 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -95,7 +95,9 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y CONFIG_PHY_MARVELL=y CONFIG_PHY_FIXED=y +CONFIG_DM_DSA=y CONFIG_PHY_GIGE=y +CONFIG_MV88E6XXX=y CONFIG_MVNETA=y CONFIG_MII=y CONFIG_MVMDIO=y