From: Mattijs Korpershoek Date: Wed, 10 Jul 2024 08:40:06 +0000 (+0200) Subject: bootstd: Add test for bootmeth_android X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=c2a2a06e01651ed814f8fae0c21fc49dc72b5af1;p=u-boot.git bootstd: Add test for bootmeth_android Add a unit test for testing the Android bootmethod. This requires another mmc image (mmc7) to contain the following partitions: - misc: contains the Bootloader Control Block (BCB) - boot_a: contains a fake generic kernel image - vendor_boot_a: contains a fake vendor_boot image Also add BOOTMETH_ANDROID as a dependency on sandbox so that we can test this with: $ ./test/py/test.py --bd sandbox --build -k test_ut # build the mmc7.img $ ./test/py/test.py --bd sandbox --build -k bootflow_android Signed-off-by: Mattijs Korpershoek Reviewed-by: Julien Masson Reviewed-by: Guillaume La Roque Reviewed-by: Simon Glass --- diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index a012f5c4c9..5fb5eac862 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -43,6 +43,7 @@ mmc4 = "/mmc4"; mmc5 = "/mmc5"; mmc6 = "/mmc6"; + mmc7 = "/mmc7"; pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; @@ -1129,6 +1130,13 @@ filename = "mmc6.img"; }; + /* This is used for Android tests */ + mmc7 { + status = "disabled"; + compatible = "sandbox,mmc"; + filename = "mmc7.img"; + }; + pch { compatible = "sandbox,pch"; }; diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index da8c1976d7..36e43e0e21 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -15,6 +15,7 @@ CONFIG_FIT=y CONFIG_FIT_RSASSA_PSS=y CONFIG_FIT_CIPHER=y CONFIG_FIT_VERBOSE=y +CONFIG_BOOTMETH_ANDROID=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_MEASURED_BOOT=y CONFIG_BOOTSTAGE=y @@ -40,7 +41,6 @@ CONFIG_LOG_MAX_LEVEL=9 CONFIG_LOG_DEFAULT_LEVEL=6 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_STACKPROTECTOR=y -CONFIG_ANDROID_AB=y CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y CONFIG_CMD_SMBIOS=y diff --git a/test/boot/bootflow.c b/test/boot/bootflow.c index 4511cfa7f9..8b46256fa4 100644 --- a/test/boot/bootflow.c +++ b/test/boot/bootflow.c @@ -27,6 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; +extern U_BOOT_DRIVER(bootmeth_android); extern U_BOOT_DRIVER(bootmeth_cros); extern U_BOOT_DRIVER(bootmeth_2script); @@ -518,12 +519,12 @@ BOOTSTD_TEST(bootflow_cmd_boot, UT_TESTF_DM | UT_TESTF_SCAN_FDT); * @uts: Unit test state * @mmc_dev: MMC device to use, e.g. "mmc4". Note that this must remain valid * in the caller until - * @bind_cros: true to bind the ChromiumOS bootmeth + * @bind_cros: true to bind the ChromiumOS and Android bootmeths * @old_orderp: Returns the original bootdev order, which must be restored * Returns 0 on success, -ve on failure */ static int prep_mmc_bootdev(struct unit_test_state *uts, const char *mmc_dev, - bool bind_cros, const char ***old_orderp) + bool bind_cros_android, const char ***old_orderp) { static const char *order[] = {"mmc2", "mmc1", NULL, NULL}; struct udevice *dev, *bootstd; @@ -545,12 +546,19 @@ static int prep_mmc_bootdev(struct unit_test_state *uts, const char *mmc_dev, "bootmeth_script", 0, ofnode_null(), &dev)); /* Enable the cros bootmeth if needed */ - if (IS_ENABLED(CONFIG_BOOTMETH_CROS) && bind_cros) { + if (IS_ENABLED(CONFIG_BOOTMETH_CROS) && bind_cros_android) { ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd)); ut_assertok(device_bind(bootstd, DM_DRIVER_REF(bootmeth_cros), "cros", 0, ofnode_null(), &dev)); } + /* Enable the android bootmeths if needed */ + if (IS_ENABLED(CONFIG_BOOTMETH_ANDROID) && bind_cros_android) { + ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd)); + ut_assertok(device_bind(bootstd, DM_DRIVER_REF(bootmeth_android), + "android", 0, ofnode_null(), &dev)); + } + /* Change the order to include the device */ std = dev_get_priv(bootstd); old_order = std->bootdev_order; @@ -589,6 +597,37 @@ static int scan_mmc_bootdev(struct unit_test_state *uts, const char *mmc_dev, return 0; } +/** + * scan_mmc_android_bootdev() - Set up an mmc bootdev so we can access other + * distros. Android bootflow might print "ANDROID:*" while scanning + * + * @uts: Unit test state + * @mmc_dev: MMC device to use, e.g. "mmc4" + * Returns 0 on success, -ve on failure + */ +static int scan_mmc_android_bootdev(struct unit_test_state *uts, const char *mmc_dev) +{ + struct bootstd_priv *std; + struct udevice *bootstd; + const char **old_order; + + ut_assertok(prep_mmc_bootdev(uts, mmc_dev, true, &old_order)); + + console_record_reset_enable(); + ut_assertok(run_command("bootflow scan", 0)); + /* Android bootflow might print one or two 'ANDROID:*' logs */ + ut_check_skipline(uts); + ut_check_skipline(uts); + ut_assert_console_end(); + + /* Restore the order used by the device tree */ + ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd)); + std = dev_get_priv(bootstd); + std->bootdev_order = old_order; + + return 0; +} + /** * scan_mmc4_bootdev() - Set up the mmc4 bootdev so we can access a fake Armbian * @@ -1160,3 +1199,26 @@ static int bootflow_cros(struct unit_test_state *uts) return 0; } BOOTSTD_TEST(bootflow_cros, 0); + +/* Test Android bootmeth */ +static int bootflow_android(struct unit_test_state *uts) +{ + if (!IS_ENABLED(CONFIG_BOOTMETH_ANDROID)) + return -EAGAIN; + + ut_assertok(scan_mmc_android_bootdev(uts, "mmc7")); + ut_assertok(run_command("bootflow list", 0)); + + ut_assert_nextlinen("Showing all"); + ut_assert_nextlinen("Seq"); + ut_assert_nextlinen("---"); + ut_assert_nextlinen(" 0 extlinux"); + ut_assert_nextlinen(" 1 android ready mmc 0 mmc7.bootdev.whole "); + ut_assert_nextlinen("---"); + ut_assert_skip_to_line("(2 bootflows, 2 valid)"); + + ut_assert_console_end(); + + return 0; +} +BOOTSTD_TEST(bootflow_android, 0); diff --git a/test/py/tests/test_ut.py b/test/py/tests/test_ut.py index 58205066ec..05e1583059 100644 --- a/test/py/tests/test_ut.py +++ b/test/py/tests/test_ut.py @@ -11,6 +11,7 @@ import pytest import u_boot_utils # pylint: disable=E0611 from tests import fs_helper +from test_android import test_abootimg def mkdir_cond(dirname): """Create a directory if it doesn't already exist @@ -423,6 +424,83 @@ def setup_cros_image(cons): return fname +def setup_android_image(cons): + """Create a 20MB disk image with Android partitions""" + Partition = collections.namedtuple('part', 'start,size,name') + parts = {} + disk_data = None + + def set_part_data(partnum, data): + """Set the contents of a disk partition + + This updates disk_data by putting data in the right place + + Args: + partnum (int): Partition number to set + data (bytes): Data for that partition + """ + nonlocal disk_data + + start = parts[partnum].start * sect_size + disk_data = disk_data[:start] + data + disk_data[start + len(data):] + + mmc_dev = 7 + fname = os.path.join(cons.config.source_dir, f'mmc{mmc_dev}.img') + u_boot_utils.run_and_log(cons, 'qemu-img create %s 20M' % fname) + u_boot_utils.run_and_log(cons, f'cgpt create {fname}') + + ptr = 40 + + # Number of sectors in 1MB + sect_size = 512 + sect_1mb = (1 << 20) // sect_size + + required_parts = [ + {'num': 1, 'label':'misc', 'size': '1M'}, + {'num': 2, 'label':'boot_a', 'size': '4M'}, + {'num': 3, 'label':'boot_b', 'size': '4M'}, + {'num': 4, 'label':'vendor_boot_a', 'size': '4M'}, + {'num': 5, 'label':'vendor_boot_b', 'size': '4M'}, + ] + + for part in required_parts: + size_str = part['size'] + if 'M' in size_str: + size = int(size_str[:-1]) * sect_1mb + else: + size = int(size_str) + u_boot_utils.run_and_log( + cons, + f"cgpt add -i {part['num']} -b {ptr} -s {size} -l {part['label']} -t basicdata {fname}") + ptr += size + + u_boot_utils.run_and_log(cons, f'cgpt boot -p {fname}') + out = u_boot_utils.run_and_log(cons, f'cgpt show -q {fname}') + + # Create a dict (indexed by partition number) containing the above info + for line in out.splitlines(): + start, size, num, name = line.split(maxsplit=3) + parts[int(num)] = Partition(int(start), int(size), name) + + with open(fname, 'rb') as inf: + disk_data = inf.read() + + test_abootimg.AbootimgTestDiskImage(cons, 'bootv4.img', test_abootimg.boot_img_hex) + boot_img = os.path.join(cons.config.result_dir, 'bootv4.img') + with open(boot_img, 'rb') as inf: + set_part_data(2, inf.read()) + + test_abootimg.AbootimgTestDiskImage(cons, 'vendor_boot.img', test_abootimg.vboot_img_hex) + vendor_boot_img = os.path.join(cons.config.result_dir, 'vendor_boot.img') + with open(vendor_boot_img, 'rb') as inf: + set_part_data(4, inf.read()) + + with open(fname, 'wb') as outf: + outf.write(disk_data) + + print('wrote to {}'.format(fname)) + + return fname def setup_cedit_file(cons): infname = os.path.join(cons.config.source_dir, @@ -478,6 +556,7 @@ def test_ut_dm_init_bootstd(u_boot_console): setup_bootmenu_image(u_boot_console) setup_cedit_file(u_boot_console) setup_cros_image(u_boot_console) + setup_android_image(u_boot_console) # Restart so that the new mmc1.img is picked up u_boot_console.restart_uboot()