From: Ondrej Jirman <megi@xff.cz>
Date: Thu, 25 May 2023 12:18:17 +0000 (+0200)
Subject: i2c: rockchip: De-initialize the bus after start bit failure
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=ba5b9203f55bae1ef3566a84648cad46c6949270;p=u-boot.git

i2c: rockchip: De-initialize the bus after start bit failure

Failure can happen when i2c is used without initializing pinctrl properly,
which U-Boot happily allows in SPL. Without this fix, further I2C access would
fail, even after proper pinctrl initialization.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
---

diff --git a/drivers/i2c/rk_i2c.c b/drivers/i2c/rk_i2c.c
index f8fac45b6c..9927af94a8 100644
--- a/drivers/i2c/rk_i2c.c
+++ b/drivers/i2c/rk_i2c.c
@@ -342,7 +342,7 @@ static int rockchip_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
 			     int nmsgs)
 {
 	struct rk_i2c *i2c = dev_get_priv(bus);
-	int ret;
+	int ret = 0;
 
 	debug("i2c_xfer: %d messages\n", nmsgs);
 	for (; nmsgs > 0; nmsgs--, msg++) {
@@ -356,14 +356,15 @@ static int rockchip_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
 		}
 		if (ret) {
 			debug("i2c_write: error sending\n");
-			return -EREMOTEIO;
+			ret = -EREMOTEIO;
+			break;
 		}
 	}
 
 	rk_i2c_send_stop_bit(i2c);
 	rk_i2c_disable(i2c);
 
-	return 0;
+	return ret;
 }
 
 int rockchip_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)