From: Phil Sutter <phil@nwl.cc>
Date: Sun, 3 Jan 2021 22:06:44 +0000 (+0100)
Subject: arm: mvebu: ds414: Config header mini-review
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=7d3c6c6e9ff431669d22d5f46bc8ad4b963a905a;p=u-boot.git

arm: mvebu: ds414: Config header mini-review

A few minor changes:

* Get rid of leftover comments, other commits removed the defines they
  referred to.

* CONFIG_SYS_NETA_INTERFACE_TYPE is not used anymore since commit
  e3b9c98a23ca9 ("net: mvneta: Convert to driver model").

* Drop CONFIG_USB_MAX_CONTROLLER_COUNT: it is per-HCI type, so XHCI and
  EHCI could still both work be used.

* Unconditionally define CONFIG_EHCI_IS_TDI: it has no effect on XHCI so
  that conditional doesn't make any sense.

* Define a larger PHY_ANEG_TIMEOUT: In my test bed, the NIC is directly
  connected to some RTL8111 and the default 8s timeout was often too
  short.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
---

diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index a92e788a38..8aa2d47bec 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -24,31 +24,13 @@
 #define CONFIG_SYS_I2C_SLAVE		0x0
 #define CONFIG_SYS_I2C_SPEED		100000
 
-/* Environment in SPI NOR flash */
-
-#define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII
-
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
 /* USB/EHCI/XHCI configuration */
-
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-
-/* FIXME: broken XHCI support
- * Below defines should enable support for the two rear USB3 ports. Sadly, this
- * does not work because:
- * - xhci-pci seems to not support DM_USB, so with that enabled it is not
- *   found.
- * - USB init fails, controller does not respond in time */
-
-#if !defined(CONFIG_USB_XHCI_HCD)
 #define CONFIG_EHCI_IS_TDI
-#endif
-
-/* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -95,4 +77,7 @@
 #define CONFIG_BOOTCOMMAND	"sf read ${loadaddr} 0xd0000 0x700000; bootm"
 #define CONFIG_LOADADDR		0x80000
 
+/* increase autoneg timeout, my NIC sucks */
+#define PHY_ANEG_TIMEOUT	16000
+
 #endif /* _CONFIG_SYNOLOGY_DS414_H */