From: Michael Walle Date: Wed, 17 Aug 2022 19:38:04 +0000 (+0200) Subject: board: lsxl: convert to DM_GPIO X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=7c9bd92eeaa1ad4abacd5bd64fea20f75bc3d1e5;p=u-boot.git board: lsxl: convert to DM_GPIO Use the new mvebu GPIO driver and convert all the function calls to the former kirkwood GPIO driver. This means that we are now using the LED uclass and the regulator uclass. Unfortunately, the GPIO LED doesn't offer a blinking method. Thus we are now stuck with solid on and off states, which makes debugging a bit harder. Also, there is no GPIO fan driver for now. Signed-off-by: Michael Walle Reviewed-by: Stefan Roese --- diff --git a/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi b/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi new file mode 100644 index 0000000000..208b02c9da --- /dev/null +++ b/arch/arm/dts/kirkwood-lschlv2-u-boot.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ + +&hdd_power { + /delete-property/ regulator-always-on; +}; + +&usb_power { + /delete-property/ regulator-always-on; +}; diff --git a/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi b/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi new file mode 100644 index 0000000000..208b02c9da --- /dev/null +++ b/arch/arm/dts/kirkwood-lsxhl-u-boot.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ + +&hdd_power { + /delete-property/ regulator-always-on; +}; + +&usb_power { + /delete-property/ regulator-always-on; +}; diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index 7fab5fbe44..6a866b5470 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -9,16 +9,18 @@ #include #include +#include #include #include #include +#include +#include #include #include -#include #include #include -#include #include +#include #include #include "lsxl.h" @@ -118,48 +120,43 @@ int board_early_init_f(void) return 0; } -#define LED_OFF 0 -#define LED_ALARM_ON 1 -#define LED_ALARM_BLINKING 2 -#define LED_POWER_ON 3 -#define LED_POWER_BLINKING 4 -#define LED_INFO_ON 5 -#define LED_INFO_BLINKING 6 +enum { + LSXL_LED_OFF, + LSXL_LED_ALARM, + LSXL_LED_POWER, + LSXL_LED_INFO, +}; -static void __set_led(int blink_alarm, int blink_info, int blink_power, - int value_alarm, int value_info, int value_power) +static void __set_led(int alarm, int info, int power) { - kw_gpio_set_blink(GPIO_ALARM_LED, blink_alarm); - kw_gpio_set_blink(GPIO_INFO_LED, blink_info); - kw_gpio_set_blink(GPIO_POWER_LED, blink_power); - kw_gpio_set_value(GPIO_ALARM_LED, value_alarm); - kw_gpio_set_value(GPIO_INFO_LED, value_info); - kw_gpio_set_value(GPIO_POWER_LED, value_power); + struct udevice *led; + int ret; + + ret = led_get_by_label("lsxl:red:alarm", &led); + if (!ret) + led_set_state(led, alarm); + ret = led_get_by_label("lsxl:amber:info", &led); + if (!ret) + led_set_state(led, info); + ret = led_get_by_label("lsxl:blue:power", &led); + if (!ret) + led_set_state(led, power); } static void set_led(int state) { switch (state) { - case LED_OFF: - __set_led(0, 0, 0, 1, 1, 1); + case LSXL_LED_OFF: + __set_led(0, 0, 0); break; - case LED_ALARM_ON: - __set_led(0, 0, 0, 0, 1, 1); + case LSXL_LED_ALARM: + __set_led(1, 0, 0); break; - case LED_ALARM_BLINKING: - __set_led(1, 0, 0, 1, 1, 1); + case LSXL_LED_INFO: + __set_led(0, 1, 0); break; - case LED_INFO_ON: - __set_led(0, 0, 0, 1, 0, 1); - break; - case LED_INFO_BLINKING: - __set_led(0, 1, 0, 1, 1, 1); - break; - case LED_POWER_ON: - __set_led(0, 0, 0, 1, 1, 0); - break; - case LED_POWER_BLINKING: - __set_led(0, 0, 1, 1, 1, 1); + case LSXL_LED_POWER: + __set_led(0, 0, 1); break; } } @@ -169,32 +166,56 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - set_led(LED_POWER_BLINKING); + set_led(LSXL_LED_POWER); return 0; } static void check_power_switch(void) { - if (kw_gpio_get_value(GPIO_POWER_SWITCH)) { - /* turn off fan, HDD and USB power */ - kw_gpio_set_value(GPIO_HDD_POWER, 0); - kw_gpio_set_value(GPIO_USB_VBUS, 0); - kw_gpio_set_value(GPIO_FAN_HIGH, 1); - kw_gpio_set_value(GPIO_FAN_LOW, 1); - set_led(LED_OFF); + struct udevice *power_button, *hdd_power, *usb_power; + int ret; + + ret = button_get_by_label("Power-on Switch", &power_button); + if (ret) + goto err; + + ret = regulator_get_by_platname("HDD Power", &hdd_power); + if (ret) + goto err; + + ret = regulator_get_by_platname("USB Power", &usb_power); + if (ret) + goto err; + + if (button_get_state(power_button) == BUTTON_OFF) { + ret = regulator_set_enable(hdd_power, false); + if (ret) + goto err; + ret = regulator_set_enable(usb_power, false); + if (ret) + goto err; + /* TODO: fan off */ + set_led(LSXL_LED_OFF); /* loop until released */ - while (kw_gpio_get_value(GPIO_POWER_SWITCH)) + while (button_get_state(power_button) == BUTTON_OFF) ; /* turn power on again */ - kw_gpio_set_value(GPIO_HDD_POWER, 1); - kw_gpio_set_value(GPIO_USB_VBUS, 1); - kw_gpio_set_value(GPIO_FAN_HIGH, 0); - kw_gpio_set_value(GPIO_FAN_LOW, 0); - set_led(LED_POWER_BLINKING); - } + ret = regulator_set_enable(hdd_power, true); + if (ret) + goto err; + ret = regulator_set_enable(usb_power, true); + if (ret) + goto err; + /* TODO: fan on */ + set_led(LSXL_LED_POWER); + }; + + return; +err: + printf("error in %s\n", __func__); } void check_enetaddr(void) @@ -203,7 +224,7 @@ void check_enetaddr(void) if (!eth_env_get_enetaddr("ethaddr", enetaddr)) { /* signal unset/invalid ethaddr to user */ - set_led(LED_INFO_BLINKING); + set_led(LSXL_LED_INFO); } } @@ -231,17 +252,24 @@ static void rescue_mode(void) static void check_push_button(void) { + struct udevice *func_button; int i = 0; - while (!kw_gpio_get_value(GPIO_FUNC_BUTTON)) { + int ret; + + ret = button_get_by_label("Function Button", &func_button); + if (ret) + goto err; + + while (button_get_state(func_button) == BUTTON_ON) { udelay(100000); i++; if (i == 10) - set_led(LED_INFO_ON); + set_led(LSXL_LED_INFO); if (i >= 100) { - set_led(LED_INFO_BLINKING); + set_led(LSXL_LED_ALARM); break; } } @@ -250,6 +278,10 @@ static void check_push_button(void) erase_environment(); else if (i >= 10) force_rescue_mode = true; + + return; +err: + printf("error in %s\n", __func__); } int board_early_init_r(void) @@ -279,6 +311,6 @@ void show_boot_progress(int progress) if (progress == -BOOTSTAGE_ID_NET_LOADED) return; - set_led(LED_ALARM_BLINKING); + set_led(LSXL_LED_ALARM); } #endif diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index b3ad20c4db..2146a33276 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -14,6 +14,7 @@ CONFIG_TARGET_LSXL=y CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lschlv2" CONFIG_IDENT_STRING=" LS-CHLv2" CONFIG_SYS_LOAD_ADDR=0x800000 @@ -37,6 +38,9 @@ CONFIG_CMD_SATA=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_BUTTON is not set +# CONFIG_CMD_LED is not set +CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y @@ -48,7 +52,10 @@ CONFIG_SATA_MV=y CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_LBA48=y CONFIG_SYS_64BIT_LBA=y -CONFIG_KIRKWOOD_GPIO=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_LED=y +CONFIG_LED_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y @@ -56,6 +63,8 @@ CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_MVGBE=y CONFIG_MII=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 747a224999..d8953128e0 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -15,6 +15,7 @@ CONFIG_LSXHL=y CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x70000 CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lsxhl" CONFIG_IDENT_STRING=" LS-XHL" CONFIG_SYS_LOAD_ADDR=0x800000 @@ -38,6 +39,9 @@ CONFIG_CMD_SATA=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_BUTTON is not set +# CONFIG_CMD_LED is not set +CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y @@ -49,7 +53,10 @@ CONFIG_SATA_MV=y CONFIG_SYS_SATA_MAX_DEVICE=1 CONFIG_LBA48=y CONFIG_SYS_64BIT_LBA=y -CONFIG_KIRKWOOD_GPIO=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_LED=y +CONFIG_LED_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y @@ -57,6 +64,8 @@ CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_MVGBE=y CONFIG_MII=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y