From: Dave Aldridge Date: Thu, 1 Sep 2011 22:47:14 +0000 (+0000) Subject: ns16550: change to allow 32 bit access to registers X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=79df1208ee6984aa63468673c042667d121bb0bc;p=u-boot.git ns16550: change to allow 32 bit access to registers If CONFIG_SYS_NS16550_MEM32 is defined then 32 bit memory mapped access will be used to read/write the uart registers. This is especially useful for SoC devices that implement 16550 compatible uarts but that have peripheral access width constraints. Signed-off-by: Dave Aldridge --- diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 8eeb48fb2a..0174744dfe 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -19,6 +19,12 @@ #ifdef CONFIG_SYS_NS16550_PORT_MAPPED #define serial_out(x,y) outb(x,(ulong)y) #define serial_in(y) inb((ulong)y) +#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) +#define serial_out(x,y) out_be32(y,x) +#define serial_in(y) in_be32(y) +#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) +#define serial_out(x,y) out_le32(y,x) +#define serial_in(y) in_le32(y) #else #define serial_out(x,y) writeb(x,y) #define serial_in(y) readb(y) diff --git a/include/ns16550.h b/include/ns16550.h index 9ea81e9463..51f1c17b31 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -21,8 +21,12 @@ * will not allocate storage for arrays of size 0 */ +#include + #if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) #error "Please define NS16550 registers size." +#elif defined(CONFIG_SYS_NS16550_MEM32) +#define UART_REG(x) u32 x #elif (CONFIG_SYS_NS16550_REG_SIZE > 0) #define UART_REG(x) \ unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \