From: Christophe Leroy Date: Fri, 14 Oct 2022 07:14:44 +0000 (+0200) Subject: spi, mpc8xx: Add support for chipselect via GPIO and fixups X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=773ad4ebb1d6;p=u-boot.git spi, mpc8xx: Add support for chipselect via GPIO and fixups This patch fixes the mpc8xx SPI driver: - A stub callbacks for mode and speed, - Use chip selects defined as GPIOs, - Write proper value to disable relocation, other it fails on mpc885, - Don't modify ports setup, ports can be different from one board to another and are already set by board_early_init_r(). This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy Reviewed-by: FRANJOU Stephane --- diff --git a/drivers/spi/mpc8xx_spi.c b/drivers/spi/mpc8xx_spi.c index 0026ad23e3..d84d7aea88 100644 --- a/drivers/spi/mpc8xx_spi.c +++ b/drivers/spi/mpc8xx_spi.c @@ -24,12 +24,29 @@ #include #include +#include #define CPM_SPI_BASE_RX CPM_SPI_BASE #define CPM_SPI_BASE_TX (CPM_SPI_BASE + sizeof(cbd_t)) #define MAX_BUFFER 0x104 +struct mpc8xx_priv { + spi_t __iomem *spi; + struct gpio_desc gpios[16]; + int max_cs; +}; + +static int mpc8xx_spi_set_mode(struct udevice *dev, uint mod) +{ + return 0; +} + +static int mpc8xx_spi_set_speed(struct udevice *dev, uint speed) +{ + return 0; +} + static int mpc8xx_spi_probe(struct udevice *dev) { immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; @@ -38,42 +55,9 @@ static int mpc8xx_spi_probe(struct udevice *dev) cbd_t __iomem *tbdf, *rbdf; /* Disable relocation */ - out_be16(&spi->spi_rpbase, 0); + out_be16(&spi->spi_rpbase, 0x1d80); /* 1 */ - /* ------------------------------------------------ - * Initialize Port B SPI pins -> page 34-8 MPC860UM - * (we are only in Master Mode !) - * ------------------------------------------------ */ - - /* -------------------------------------------- - * GPIO or per. Function - * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO) - * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI) - * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK) - * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM) - * -------------------------------------------- */ - clrsetbits_be32(&cp->cp_pbpar, 0x00000001, 0x0000000E); /* set bits */ - - /* ---------------------------------------------- - * In/Out or per. Function 0/1 - * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO - * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI - * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK - * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM - * ---------------------------------------------- */ - setbits_be32(&cp->cp_pbdir, 0x0000000F); - - /* ---------------------------------------------- - * open drain or active output - * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO - * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI - * PBODR[30] = 0 [0x00000002] -> active output: SPICLK - * PBODR[31] = 0 [0x00000001] -> active output GPIO OUT: CS for PCUE/CCM - * ---------------------------------------------- */ - - clrsetbits_be16(&cp->cp_pbodr, 0x00000007, 0x00000008); - /* Initialize the parameter ram. * We need to make sure many things are initialized to zero */ @@ -143,6 +127,22 @@ static int mpc8xx_spi_probe(struct udevice *dev) return 0; } +static void mpc8xx_spi_cs_activate(struct udevice *dev) +{ + struct mpc8xx_priv *priv = dev_get_priv(dev->parent); + struct dm_spi_slave_plat *platdata = dev_get_parent_plat(dev); + + dm_gpio_set_value(&priv->gpios[platdata->cs], 1); +} + +static void mpc8xx_spi_cs_deactivate(struct udevice *dev) +{ + struct mpc8xx_priv *priv = dev_get_priv(dev->parent); + struct dm_spi_slave_plat *platdata = dev_get_parent_plat(dev); + + dm_gpio_set_value(&priv->gpios[platdata->cs], 0); +} + static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { @@ -159,7 +159,8 @@ static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen, rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX]; /* Set CS for device */ - clrbits_be32(&cp->cp_pbdat, 0x0001); + if (flags & SPI_XFER_BEGIN) + mpc8xx_spi_cs_activate(dev); /* Setting tx bd status and data length */ out_be32(&tbdf->cbd_bufaddr, (ulong)dout); @@ -186,21 +187,40 @@ static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen, for (tm = 0; tm < 1000; ++tm) { if (in_8(&cp->cp_spie) & SPI_TXB) /* Tx Buffer Empty */ break; + if ((in_be16(&tbdf->cbd_sc) & BD_SC_READY) == 0) break; udelay(1000); } + if (tm >= 1000) printf("*** spi_xfer: Time out while xferring to/from SPI!\n"); /* Clear CS for device */ - setbits_be32(&cp->cp_pbdat, 0x0001); + if (flags & SPI_XFER_END) + mpc8xx_spi_cs_deactivate(dev); - return count; + return 0; } +static int mpc8xx_spi_ofdata_to_platdata(struct udevice *dev) +{ + struct mpc8xx_priv *priv = dev_get_priv(dev); + int ret; + + ret = gpio_request_list_by_name(dev, "gpios", priv->gpios, + ARRAY_SIZE(priv->gpios), GPIOD_IS_OUT); + if (ret < 0) + return ret; + + priv->max_cs = ret; + + return 0; +} static const struct dm_spi_ops mpc8xx_spi_ops = { .xfer = mpc8xx_spi_xfer, + .set_speed = mpc8xx_spi_set_speed, + .set_mode = mpc8xx_spi_set_mode, }; static const struct udevice_id mpc8xx_spi_ids[] = { @@ -212,6 +232,8 @@ U_BOOT_DRIVER(mpc8xx_spi) = { .name = "mpc8xx_spi", .id = UCLASS_SPI, .of_match = mpc8xx_spi_ids, + .of_to_plat = mpc8xx_spi_ofdata_to_platdata, .ops = &mpc8xx_spi_ops, .probe = mpc8xx_spi_probe, + .priv_auto = sizeof(struct mpc8xx_priv), };