From: Tom Rini <trini@konsulko.com>
Date: Mon, 20 May 2024 15:54:58 +0000 (-0600)
Subject: Squashed 'dts/upstream/' changes from b35b9bd1d4ee..7e08733c96c8
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=6bb92fcf7d2fea2314d616e5e2391a8bf2b0fdfa;p=u-boot.git

Squashed 'dts/upstream/' changes from b35b9bd1d4ee..7e08733c96c8

7e08733c96c8 Merge tag 'v6.9-dts-raw'
ccdce3340fc5 Merge tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
cb4ccb79bf49 dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
6bd14595bb37 Merge tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
a6d12fb4ba6f Merge tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
71c2fe626e53 Merge tag 'v6.9-rc7-dts-raw'
62d74bd1c58f Merge tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
bdc631c5b7eb arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node
9818a367c6b8 Merge tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
c861ae2b0770 Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
c9551dbd4ea4 Merge tag 'v6.9-rc6-dts-raw'
17c632b49122 Merge tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
a1bf8545a7b4 Merge tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
d13e05c0fe9b Merge tag 'arc-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
83b7bf1bdd47 Merge tag 'imx-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into for-next
3a940d011934 Merge tag 'mtk-dts64-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next
6eeb1be299fc Merge tag 'at91-fixes-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into for-next
733db5273cb7 Merge tag 'qcom-arm64-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into for-next
76a235f6ef02 Merge branch 'v6.9-armsoc/dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into for-next
a4916498fb4a Merge tag 'at24-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
6ee8c2d34ea8 ARM: dts: imx6ull-tarragon: fix USB over-current polarity
c3ee365cb940 Merge tag 'iio-fixes-for-6.9a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
bb3b0f6bb688 Merge tag 'v6.9-rc5-dts-raw'
ca2b45c908c0 arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
b91b30ccdb82 Merge tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
9e347843c73f ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
a6e3d2cb9d6d ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
01c2febb3cdb arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
460856d18366 arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
e91f447c8573 Merge tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
b362458a0941 dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
4c77f098d193 ARC: [plat-hsdk]: Remove misplaced interrupt-cells property
bc5665bd550f dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property
bdb049c4d14f Merge tag 'v6.9-rc4-dts-raw'
ea20dda12f5b Merge tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
c43f5bbe57fe arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
09bbdcd84ac2 arm64: dts: qcom: sm8650: Fix the msi-map entries
864783541376 arm64: dts: qcom: sm8550: Fix the msi-map entries
ddedda592d70 arm64: dts: qcom: sm8450: Fix the msi-map entries
960336e0e880 arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
eb57b8e07fd7 arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
64b22344a08d arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
3d4da9353d8a Merge tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel
94d5ae8ffd5b Merge tag 'drm-msm-next-2024-04-11' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
45ab49b70c99 LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET
e5f2765cdef5 LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI
65d54f215c81 LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC
05bddcf85f2c LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC
e32b794a9062 arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
cf90790de0b2 dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
ad6402eb7acc arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
ace753017ab4 arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
24eae3d76a2b arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
6ddbc8e4f612 arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
7d1e92c191e5 arm64: dts: rockchip: Designate the system power controller on QuartzPro64
b2f8ee07aa8e ASoC: dt-bindings: rt5645: add cbj sleeve gpio property
39841e784daa MAINTAINERS: mailmap: update Richard Genoud's email address
10c6631c86d1 Merge tag 'v6.9-rc3-dts-raw'
4ea847a91dd6 Merge tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
446b3564a952 arm64: dts: mediatek: mt2712: fix validation errors
65d0eb62f0f1 arm64: dts: mediatek: mt7986: prefix BPI-R3 cooling maps with "map-"
a2ac24e9a4dc arm64: dts: mediatek: mt7986: drop invalid thermal block clock
7d65b24f6c7b arm64: dts: mediatek: mt7986: drop "#reset-cells" from Ethernet controller
6674a5ba09ef arm64: dts: mediatek: mt7986: drop invalid properties from ethsys
fb0a8e849646 dt-bindings: timer: narrow regex for unit address to hex numbers
cb1b6952348f dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
27c8017d28c8 dt-bindings: remoteproc: ti,davinci: remove unstable remark
9095a10d281f dt-bindings: clock: ti: remove unstable remark
3f61301c1488 dt-bindings: clock: keystone: remove unstable remark
31b1ce263042 arm64: dts: imx8qm-ss-dma: fix can lpcg indices
743b20b5d4db arm64: dts: imx8-ss-dma: fix can lpcg indices
d8f0818c58bc arm64: dts: imx8-ss-dma: fix adc lpcg indices
2349133feee2 arm64: dts: imx8-ss-dma: fix pwm lpcg indices
a18420af419e arm64: dts: imx8-ss-dma: fix spi lpcg indices
d6d2add292ae arm64: dts: imx8-ss-conn: fix usb lpcg indices
fc19a9596662 arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
64a1c4a72a08 arm64: dts: mediatek: mt7622: drop "reset-names" from thermal block
f91467bb0e7c arm64: dts: mediatek: mt7622: fix ethernet controller "compatible"
8e632e3e98df arm64: dts: mediatek: mt7622: fix IR nodename
1472eb8a5653 arm64: dts: mediatek: mt7622: fix clock controllers
5802f95e74db arm64: dts: mediatek: mt8186-corsola: Update min voltage constraint for Vgpu
6cb73d686d58 arm64: dts: mediatek: mt8183-kukui: Use default min voltage for MT6358
cd3a14e0479e arm64: dts: mediatek: mt8195-cherry: Update min voltage constraint for MT6315
2814659a8a80 arm64: dts: mediatek: mt8192-asurada: Update min voltage constraint for MT6315
3ea180fa00c5 arm64: dts: mediatek: cherry: Describe CPU supplies
c452106eb835 arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex1
5893bd804364 arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex
ad1660ce46c3 arm64: dts: mediatek: mt8195: Add missing gce-client-reg to vpp/vdosys
744724419d4c arm64: dts: mediatek: mt8192: Add missing gce-client-reg to mutex
902cad91425f arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg
7b49bc388147 ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
bd5623d08b6c ARM: dts: imx7-mba7: Use 'no-mmc' property
51b8028c7925 arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
6beeed742637 dt-bindings: display/msm: sm8150-mdss: add DP node
954f369b81da ARC: Fix typos
3d2c4d764916 arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
fa6ab1a0c8a1 arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
7f80622495d4 arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken
92953647265f dt-bindings: bluetooth: add 'qcom,local-bd-address-broken'
6421f94d75f4 arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
4bb321df9164 arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
f37161a9cf0c dt-bindings: ufs: qcom: document SM6125 UFS
b2a26b71ae7d dt-bindings: ufs: qcom: document SC7180 UFS
1cb1e2605d33 dt-bindings: ufs: qcom: document SC8180X UFS
6bd77a407d2e dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
2639a0e2fdbd Merge tag 'v6.9-rc1-dts-raw'
15eca7b21493 docs: dt-bindings: add missing address/size-cells to example
9ace491cae40 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
d8bdab44b3fe arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou
1331876fe9c8 arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
57878497676a arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
a9686a9d2878 arm64: dts: rockchip: fix alphabetical ordering RK3399 puma
6125abd98f94 arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma
e51b8871e6a8 arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
8c7a1135d13d dt-bindings: iio: health: maxim,max30102: fix compatible check
7eea89692b5a Merge tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
665795c05a77 Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
9497bb8a116e Merge tag 'spi-fix-v6.9-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
6aef9b1ef737 Merge tag 'sound-fix2-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
17cde028ffcc Merge tag 'i2c-for-6.9-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
7bbd20ac15d0 Merge tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
b2bb86451efb Merge tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
203aa834e5f2 Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
9125147fa946 Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
e5738ce51174 Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
d4a1391985cc Merge tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
b3632b121e0d Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
4a7dcd8c3a18 dt-bindings: i2c: qcom,i2c-cci: Fix OV7251 'data-lanes' entries
f76fa412f9a8 Merge tag 'i2c-host-6.9-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
8cd35b85c4b0 Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
f6c32d4a4ede Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
6630f47c5f9a spi: Merge up v6.8 release
ec2e44a038f5 Merge tag 'timers-v6.9-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
ef0c6b10c2da Merge tag 'i3c/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
6defc064e93e Merge tag 'linux-watchdog-6.9-rc1' of git://www.linux-watchdog.org/linux-watchdog
72fe2cde7b8a Merge tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
a546e7273d2d Merge tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
3972e256bfa2 Merge tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
a355cc2d4dcb Merge tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
aefedca6e1b1 Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
8eb838e35ade Merge tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
7497080a0eda Merge tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
571f27ef129d Merge tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
fb60e6d58b2d dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema
34598dab4724 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
9d67b3ce96cb Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
3fe3426bca72 dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
7311bc58c158 Merge tag 'nand/for-6.9' into mtd/next
146d9a6f3ded dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
e2a5c7c3959b arm64: dts: broadcom: bcmbca: Update router boards
1bd13f3b7695 arm64: dts: broadcom: bcmbca: Add NAND controller node
cc519333e3cf ARM: dts: broadcom: bcmbca: Add NAND controller node
c1e4264b6d55 Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
6371c24fe180 Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
98c06b3a9483 Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
7fa73443a89b Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
e76bc30ffbd6 Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
19186d59b259 Merge tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
75c5518e62b1 Merge tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
099699809967 Merge tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
8e49bd3cbb58 Merge tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
a775511def90 Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel
4d3acb15ed8a Merge tag 'spi-nor/for-6.9' into mtd/next
51591c70d1ca Merge branches 'clk-samsung', 'clk-imx', 'clk-rockchip', 'clk-clkdev' and 'clk-rate-exclusive' into clk-next
0c05d2bca0f7 Merge tag 'thermal-v6.9-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
a55648d846e7 Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and 'clk-microchip' into clk-next
749f625e4547 Merge branches 'clk-aspeed', 'clk-keystone', 'clk-mobileye' and 'clk-allwinner' into clk-next
82d0f90167fc Merge branches 'clk-renesas', 'clk-cleanup', 'clk-hisilicon', 'clk-mediatek' and 'clk-bulk' into clk-next
6526c4a4b4e5 Merge tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
1da1a2503cbc Merge tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
cecb3b4fdac3 Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
49c8db52641c Merge tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
b15efb2ec6a3 Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
51da5c0be9f6 ASoC: Merge up release
82088fb378a1 Merge tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
08aa0ae1911b Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
4a3bf9f36d1e Merge tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
c77ca2066932 Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
c5d224537c1b Merge tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
4915b8cd98b1 Merge tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
087aaa6a3b72 Merge tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
8a195fe51ba1 Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
80731b204b02 Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
ba13a7bc46d2 Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
8bdef0681554 Merge branch 'pci/controller/qcom'
5ad36cd7e767 riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
8ecbb51f81c3 dt-bindings: riscv: Add Andes PMU extension description
9b464e19669d riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
7d51e7e2e08f dt-bindings: riscv: Add Andes interrupt controller compatible string
9ff0305a8ca8 ASoC: dt-bindings: cirrus,cs42l43: Fix 'gpio-ranges' schema
9527f40e46b6 Input: allocate keycode for Display refresh rate toggle
62e63d55bebc Merge tag 'i2c-host-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
9570e92757ae dt-bindings: tpm: Add compatible string atmel,attpm20p
7cfac8b79d64 Merge tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
432d7edb5952 dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
338820b14493 dt-bindings: thermal-zones: Don't require polling-delay(-passive)
586ddb37a9a4 dt-bindings: thermal: sun8i: Add H616 THS controller
167b4b5a2247 dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
97f8ab2a1af7 Merge tag 'opp-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm
6478cc89c8f9 Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ac6125bb95c2 mips: dts: ralink: mt7621: add cell count properties to usb
c5bb691ccc3e mips: dts: ralink: mt7621: add serial1 and serial2 nodes
7b09814959b2 mips: dts: ralink: mt7621: reorder serial0 properties
ec836787ded4 mips: dts: ralink: mt7621: associate uart1_pins with serial0
7d9359e47208 Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
078fe0b4bda8 Merge tag 'arm-soc/for-6.9/drivers' of https://github.com/Broadcom/stblinux into soc/late
a851536f7d1f Merge tag 'arm-soc/for-6.9/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/late
63fbbfa8e739 dt-bindings: opp: drop maxItems from inner items
54c13b3c325d dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
4950062963d6 dt-bindings: input: imagis: Document touch keys
cfb6e7e4aab8 dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
c779c938fb22 dt-bindings: pinctrl: qcom: update compatible name for match with driver
98b8ca8bcb74 dt-bindings: input: atmel,captouch: convert bindings to YAML
f4627ef4c35c dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example
e6a7453cf514 Merge tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
826587e76776 dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
e776ecb01509 dt-bindings: PCI: qcom: Allow 'required-opps'
41c94df7b508 dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
51ec88485bd0 dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
4a0688c342c5 dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
09ed5b86a7c0 Merge branches 'arm/mediatek', 'arm/renesas', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next
1ca49df08091 dt-bindings: net: dp83822: change ti,rmii-mode description
9e691f2ca146 Merge tag 'drm-msm-next-2024-03-07' of https://gitlab.freedesktop.org/drm/msm into drm-next
cfe04ff5f8c9 dt-bindings: serial: stm32: add power-domains property
b072a75f7faf dt-bindings: nvmem: add common definition of nvmem-cell-cells
be64edb74cf7 dt-bindings: nvmem: Convert xlnx,zynqmp-nvmem.txt to yaml
baca151add1c nvmem: fixed-cell: Simplify nested if/then schema
1c0b231f57e0 dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
a0c034ed370f dt-bindings: hwmon: fan: Add fan binding to schema
5f3df8a26d1e dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
ea5fd00e7566 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
1cd0ddec1f0e dt-bindings: timer: mediatek: Convert to json-schema
4a513c9ee434 ASoC: codecs: ES8326: change support for ES8326
9428855666bf dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
ded680d1011e dt-bindings: leds: Add NCP5623 multi-LED Controller
36c053ec1940 dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
86d79b6e9034 dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
0d9351b5397b dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
00b899276322 dt-bindings: leds: Add FUNCTION defines for per-band WLANs
0d85184c07f6 dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
b4ab63101636 Merge branches 'ib-qcom-leds-6.9' and 'ib-leds-backlight-6.9' into ibs-for-leds-merged
3555e8d0b9fc dt-bindings: backlight: Add Kinetic KTD2801 binding
a8c949969077 Merge branch 'ib-nomadik-gpio' into devel
62c3262f7fe3 dt-bindings: net: renesas,etheravb: Add support for R-Car V4M
918ae23afab4 dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
e53ec66488c1 Merge tag 'icc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
1f0e4fc46ee7 Merge tag 'qcom-arm64-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
ea75705aeacc Merge tag 'riscv-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/late
584c83fce20d dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP
c04e94fc3b79 dt-bindings: remoteproc: do not override firmware-name $ref
4b39a7e1c39f dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label
e6ec88170ffc dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
fc76e2ec0af9 spi: dt-bindings: introduce FIFO depth properties
649423f8a081 ASoC: dt-bindings: rt1015: Convert to dtschema
7a4e8175bafb riscv: dts: starfive: jh7100: fix root clock names
eed1e7dce0c5 Merge tag 'ath-next-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
b77c6d6ecd26 Merge tag 'v6.8-rc7' into gpio/for-next
b6f4257e837d dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label
ab13fd756619 dt-bindings: fsl-imx-sdma: fix HDMI audio index
8183e8af3de8 dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
364eb93f21bc dt-bindings: soc: imx: fsl,imx-anatop: add binding
0d6b9633b62c dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
e24d180df3e3 dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
c6cb9528755c Merge tag 'v6.9-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
1541b5f7169a dt-bindings: usb: typec-tcpci: add tcpci fallback binding
30cfb408e45f dt-bindings: usb: Add downstream facing ports to realtek binding
ba19f225f401 dt-bindings: usb: Add binding for TI USB8020B hub controller
c3251302f8d3 dt-bindings: usb: analogix,anx7411: drop redundant connector properties
c6425032f69e dt-bindings: usb: add hisilicon,hi3798mv200-dwc3
a1bd84637b96 dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding
7fc53b04c1ea dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML
f1338ec7ac44 dt-bindings: i2c: mpc: use proper binding for transfer timeouts
78ad26b5f48f dt-bindings: interrupt-controller: Convert Atmel AIC to json-schema
99d17f43c09c Merge tag 'reset-for-v6.9' of git://git.pengutronix.de/pza/linux into soc/late
14c572ddf1f9 Merge tag 'omap-for-v6.9/dt-warnings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/late
04cdefa63030 Merge tag 'vexpress-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
8100aecad25e ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
44ffff36c17a Merge tag 'ti-keystone-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
38d2af77456f Merge tag 'memory-controller-drv-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
4b3d3727fe21 Merge tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
1390bca92db4 spi: dt-bindings: samsung: make dma properties not required
f3f062800bf5 dt-bindings: perf: starfive: Add JH8100 StarLink PMU
8ade2ed03067 dt-bindings: usb: qcom,pmic-typec: add support for the PM4125 block
ffd54b03300e dt-bindings: leds: pwm-multicolour: re-allow active-low
2bd3e3e38b19 dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string
a1a33ad5df89 dt-bindings: imx6q-pcie: Add imx95 pcie compatible string
d5b3866ee39c dt-bindings: imx6q-pcie: Restruct reg and reg-name
17964120885e dt-bindings: imx6q-pcie: Clean up duplicate clocks check
b2e87666166c Merge tag 'qcom-arm32-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
d6f0d6fbd771 Merge tag 'v6.9-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
9beae6e4f5b2 Merge tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
bfa16e672f23 Merge tag 'riscv-sophgo-dt-for-v6.9' of https://github.com/sophgo/linux into soc/dt
b9a523277cff Merge tag 'mvebu-dt64-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
472acadc4b85 Merge tag 'mvebu-dt-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
a1c9c09fe4c6 Merge tag 'renesas-dt-bindings-for-v6.9-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
ed9768f823d1 Merge tag 'stm32-dt-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
a93afb6c68a1 arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
c1d25c9b315c arm64: dts: qcom: sm8650: Fix SPMI channels size
f203c283f5bb arm64: dts: qcom: sm8550: Fix SPMI channels size
6b3cdc5e247c Merge tag 'drm-misc-next-2024-02-29' into msm-next
0ccaa0050371 dt-bindings: input/touchscreen: imagis: add compatible for IST3032C
f4cd9022dce6 dt-bindings: input/touchscreen: Add compatible for IST3038B
147eff3c7cff dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
3a9200687cf7 dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
cbe08f41aa59 dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
be02d67086d9 dt-bindings: watchdog: arm,sp805: document the reset signal
201c69876dc6 dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
653594df87d5 dt-bindings: serial: convert st,asc to DT schema
1a0b7e8acef8 powerpc: dts: akebono: Harmonize EHCI/OHCI DT nodes name
8d179c0b54fb dt-bindings: usb: qcom,dwc3: fix a typo in interrupts' description
c630e9b5a72f arm64: dts: qcom: pm6150: define USB-C related blocks
da1d13674619 dt-bindings: usb: qcom,pmic-typec: Add support for the PM6150 PMIC
d3864961a639 Merge tag 'w1-drv-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into tty-next
8f130bd54c7b Merge tag 'iio-for-6.9b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
20d54e06e2a3 Merge tag 'coresight-next-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
c326cc675c68 arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
3965a283125e dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
d397107f4e3a dt-bindings: pwm: amlogic: fix s4 bindings
6d25cc8fd5da dt-bindings: i2c: Remove obsolete i2c.txt
59488a1b3652 dt-bindings: arm: syna: remove unstable remark
1d325ff1ed92 dt-bindings: net: bluetooth: qualcomm: Fix bouncing @codeaurora
9f1d679268ba dt-bindings: watchdog: drop obsolete brcm,bcm2835-pm-wdt bindings
090fc268fac4 dt-bindings: watchdog: qcom-wdt: Update maintainer to Rajendra Nayak
0451b0796a61 dt-bindings: hwmon: lm75: use common hwmon schema
371142306400 Merge tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
0e7fe10bc9e6 Merge tag 'amlogic-arm-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
d0cb807cfef4 Merge tag 'omap-for-v6.9/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
3578f1b6dbed Merge tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
d68c28418b67 riscv: dts: starfive: jh7110: Add camera subsystem nodes
aa86c303373a arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
ae315320f5d1 arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
6330d58dd4fe dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
1a4325f9d215 Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
6d23cfa8897b Merge tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
7632a364f33e Merge tag 'zynqmp-dt-for-6.9' of https://github.com/Xilinx/linux-xlnx into soc/dt
02eba1b4512a Merge tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
c0d63be31667 Merge tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
0d1bd814646e Merge tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
fcd3ba0ec7e6 Merge tag 'imx-bindings-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
911a0e5da311 Merge tag 'socfpga_dts_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
fec957a967a1 dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
f25a9445fef8 dt-bindings: crypto: add sam9x7 in Atmel TDES
8790f16edade dt-bindings: crypto: add sam9x7 in Atmel SHA
44266f1d25b2 dt-bindings: crypto: add sam9x7 in Atmel AES
2b1ebc6d769d Merge tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
43a56bf3bdaf Merge tag 'sunxi-dt-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
e19434848bd8 Merge tag 'drm-msm-next-2024-02-29' of https://gitlab.freedesktop.org/drm/msm into drm-next
01321d44f1ec dt-bindings: net: brcm,asp-v2.0: Add asp-v2.2
d5a543a359ce dt-bindings: net: brcm,unimac-mdio: Add asp-v2.2
089e8a0b0394 dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
925e183d1d3e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
c44ea78dc972 dt-bindings: rtc: abx80x: convert to yaml
3a25f24b71ce dt-bindings: at91rm9260-rtt: add sam9x7 compatible
6ae5f27fcef7 dt-bindings: rtc: convert MT7622 RTC to the json-schema
8e6eb376128e dt-bindings: rtc: convert MT2717 RTC to the json-schema
dffd03e7b3c3 Merge branch 'icc-sm7150' into icc-next
f8afb1ebc676 dt-bindings: interconnect: Add Qualcomm SM7150 DT bindings
253a470f5420 dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
f689de1b40f9 dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
a029ec8c35c4 Merge tag 'tegra-for-6.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
cbda1f9ca478 Merge tag 'tegra-for-6.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
061a7ef8ce88 Merge tag 'tegra-for-6.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
2788cdbbf836 Merge tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
af467f28aa2e Merge tag 'renesas-dt-bindings-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
e422e34ebe7a Merge tag 'v6.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
15643f4b8b71 Merge tag 'v6.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
3b71bcf355d9 Merge tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
d73cece0601b Merge tag 'gemini-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
d5e822510e6a Merge tag 'mtk-dts64-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
88c6586d8ddc Merge tag 'dt-cleanup-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
485c27391cf2 Merge tag 'samsung-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
9a55de21e5e8 Merge tag 'samsung-dt64-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
7fe0c3cf50e7 Merge tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
a28ccc2c8a1e Merge tag 'renesas-dt-bindings-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
3a1d10b8a7ea dt-bindings: pinctrl: at91: add sam9x7
25fa45a7091a arm64: dts: st: add video encoder support to stm32mp255
374df3f7a69d arm64: dts: st: add video decoder support to stm32mp255
f1523e3d07c3 dt-bindings: gpio: nomadik: add optional reset property
7c456af0e520 dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible
6412671654fb dt-bindings: gpio: nomadik: add optional ngpios property
33796ff4220d dt-bindings: gpio: nomadik: convert into yaml format
e5443d45c0ec ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
fdf13e6831f2 ARM: dts: stm32: enable CRC on stm32mp135f-dk
b5c98471fd1a ARM: dts: stm32: add CRC on stm32mp131
f454b7a85920 dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings
e03c12f18d62 ARM: dts: add stm32f769-disco-mb1166-reva09
690f4c3b681a ARM: dts: stm32: add display support on stm32f769-disco
4cb81b91ac87 ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
82d1ed24df95 ARM: dts: stm32: add DSI support on stm32f769
c8114c09da2c dt-bindings: mfd: stm32f7: Add binding definition for DSI
363d4a9715e5 dt-bindings: nt35510: document 'port' property
9059c18b6d10 dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency
ebcb39d7a66e dt-bindings: iio: adc: imx93: drop the 4th interrupt
2f1ec66e6c94 dt-bindings: iio: adc: drop redundant type from label
d24619ffe43c dt-bindings: iio: ti,tmp117: add optional label property
633fffb7c377 dt-bindings: iio: magnetometer: Add Voltafield AF8133J
a36a9e62abdf dt-bindings: vendor-prefix: Add prefix for Voltafield
2ef6443e1743 dt-bindings: iio: light: vishay,veml6075: make vdd-supply required
c9c055c5470f dt-bindings: iio: adc: adding support for PAC193X
a288cab1e5a6 dt-bindings: iio: hmc425a: add entry for LTC6373
43172d694644 dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
42707bcbabe0 dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
49676274cbd7 dt-bindings: iio: ti,tmp117: add vcc supply binding
6dafe28e7298 dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
620fcff9d53c spi: dt-bindings: atmel,at91rm9200-spi: remove 9x60 compatible from list
22502bd8725d dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state
a3da0bec1dd6 arm64: dts: rockchip: Add basic support for QNAP TS-433
e5d58e2bc9d5 dt-bindings: arm: rockchip: Add QNAP TS-433
78b9bf1a6128 arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
2ffa10c5e5ad arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
7009dfbb88d7 dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
2516daa7bde5 arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
fc876128d301 dt-bindings: net: ethernet-controller: drop redundant type from label
13ab34ef0793 arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
883bb3a0ffc9 arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
eec8be52f681 arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
103ec967103c dt-bindings: net: dsa: realtek: add reset controller
3018a826c97d dt-bindings: net: dsa: realtek: reset-gpios is not required
6dc9f167486c dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
a181bc600877 arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
cc35d14ce704 ARM: dts: rockchip: Wifi improvements for Sonoff iHost
d3e564c6f34a ARM: dts: rockchip: mmc aliases for Sonoff iHost
ca5df862ea65 arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
ed51c83e418c arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
cff456e5f266 dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
3522950a8c39 dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
82a17c8827d1 arm64: dts: rockchip: Add HDMI0 PHY to rk3588
e66d1e81aed1 arm64: dts: armada-ap807: update thermal compatible
1d32f2a19cc3 arm64: dts: marvell: reorder crypto interrupts on Armada SoCs
35290ca22165 arm64: dts: ac5: add mmc node and clock
f5ba7df64a26 arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios
a64c072c8b1d arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically
57a80269cb6c arm: dts: marvell: clearfog-gtr: add board-specific compatible strings
9f7d319ef30b arm: dts: marvell: clearfog: add pro variant compatible in legacy dts
ee29a2404550 dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards
a94644e247d1 dt-bindings: marvell: a38x: add kobol helios-4 board
977f211a8ee3 dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards
6fe97bf74341 dt-bindings: marvell: a38x: convert soc compatibles to yaml
313957b8c112 Merge branch 'v6.9-shared/clkids' into v6.9-armsoc/dts64
e0f54133c394 dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
e32d677022ca dt-bindings: clock: rk3588: drop CLK_NR_CLKS
4b58a7ccfd97 Merge tag 'mt76-for-kvalo-2024-02-22' of https://github.com/nbd168/wireless
479c5ca5c8ae dt-bindings: arm: amlogic: add Neil, Martin and Jerome as maintainers
39d812837cdd dt-bindings: arm: amlogic: remove unstable remark
54469d99a2af dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support
f4bffe85d2e7 dt-bindings: arm: qcom,coresight-tpdm: Rename qcom,dsb-element-size
7c2c6922effb dt-bindings: memory-controller: st,stm32: add MP25 support
b3f6be88f1f5 Merge 6.8-rc6 into tty-next
f4288db518a8 dt-bindings: net: cdns,macb: add sam9x7 ethernet interface
5315d5ea1db7 dt-bindings: i2c: at91: Add sam9x7 compatible string
b99dd7ccd5b8 dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
d377e1b8336c Convert some regulator drivers to GPIO descriptors
d5220c4662fe dt-bindings: auxdisplay: Add Maxim MAX6958/6959
2f25ffe9d998 dt-bindings: arm-smmu: Document SM8650 GPU SMMU
b4c3aaf580d9 dt-bindings: arm-smmu: fix SM8[45]50 GPU SMMU if condition
0abc1ff2be4e dt-bindings: display/msm/gmu: Document Adreno 750 GMU
ec4f0c02c1ec dt-bindings: display/msm: gpu: Allow multiple digits for patchid
49915776f063 dt-bindings: lcdif: Do not require power-domains for i.MX6ULL
a2a81ebc850d dt-bindings: timer: Add support for cadence TTC PWM
0a54c5eb5a02 Merge tag 'renesas-pinctrl-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
f12177200edc dt-bindings: interrupt-controller: Add starfive,jh8100-intc
99b3211ce73c regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
ca5cca640867 ARM: dts: omap4-panda-common: Enable powering off the device
6b4a8eca637d ARM: dts: omap-embt2ws: system-power-controller for bt200
87c4cebd8708 ARM: dts: omap: Switch over to https:// url
80adf5afe7f6 ARM: dts: ti: omap: add missing abb_{mpu,ivahd,dspeve,gpu} unit addresses for dra7 SoC
a446d52725b5 ARM: dts: ti: omap: add missing sys_32k_ck unit address for dra7 SoC
4d96b742cb3e ARM: dts: ti: omap: add missing phy_gmii_sel unit address for dra7 SoC
7f22c5d06f8d dt-bindings: net: dp83822: support configuring RMII master/slave mode
5a411c0575cc ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
43768eba3fa4 ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
0f8d14846135 Merge v6.8-rc6 into drm-next
5ac99b57e27a dt-bindings: mtd: brcmnand: Add ecc strap property
d973f6e60329 dt-bindings: mtd: brcmnand: Add WP pin connection property
e8cf96a62e99 dt-bindings: mtd: brcmnand: Updates for bcmbca SoCs
4284b95c3a7d dt-bindings: mtd: st,stm32: add MP25 support
5ffc0c6588e1 dt-bindings: mtd: update references from partition.txt to mtd.yaml
079feabfa500 arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
77aac4df148c arm64: dts: add description for solidrun am642 som and evaluation board
bab419b95c2c dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
bc85817742eb dt-bindings: mtd: spi-nor: add optional interrupts property
201ac0128678 dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
c0aae9685a91 dt-bindings: riscv: cpus: reg matches hart ID
8e0b9c610742 dt-bindings: bus: imx-weim: convert to YAML
c622150ed65c Merge v6.8-rc6 into usb-next
09994ac519e2 arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
c8b82b8dd480 arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
20cdb2916423 ARM: dts: nxp: imx: fix weim node name
064185347fff ARM: dts: nxp: imx6ul: fix touchscreen node name
42a236fd930d ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
d9725dc952ee ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
6cc27853e1c4 ARM: dts: imx6ull: fix pinctrl node name
c23b15b18c81 ARM: dts: imx1-apf9328: Fix Ethernet node name
7c8b8cf4dd15 ARM: dts: imx28-evk: Use 'eeprom' as the node name
102744f8003d ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
4822eab2af53 Merge branch 'icc-cleanup' into icc-next
0b20018b1dbc dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM
5d1f49b1b6b0 dt-bindings: mtd: add basic bindings for UBI
9a35e12f4b1a dt-bindings: hwmon: reference common hwmon schema
3d36f23ac624 dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
798f72d666b8 dt-bindings: hwmon: adi,adm1275: use common hwmon schema
809baabdec34 dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
42d06958b709 dt-bindings: hwmon: add common properties
f567e7a0ce93 regulator: dt-bindings: promote infineon buck converters to their own binding
b1715c2bbc33 dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
0c5601d53cce dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
fb5eada36609 dt-bindings: trivial-devices: add Astera Labs PT5161L
7d3134823476 dt-bindings: vendor-prefixes: add asteralabs
c75f1a591ccd dt-bindings: hwmon: Add Amphenol ChipCap 2
737f7b7c7c23 dt-bindings: vendor-prefixes: add Amphenol
380e45011084 dt-bindings: Add MPQ8785 voltage regulator device
adb144c788f3 dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1
77ced3f45487 dt-bindings: arm: add UNI-T UTi260B
521023b8972b dt-bindings: vendor-prefixes: add UNI-T
10a08d63eb50 arm64: dts: imx8mp-evk: Fix hdmi@3d node
96099eef1a2c arm64: dts: imx93-var-som: Remove phy-supply from eqos
0ee187cdb35f Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
9aa0ba8c3e6a arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
195bcec93c44 arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
adb0eb622cec arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
8032acfdf1a8 arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
9ffab265f1ac arm64: dts: imx8mm-evk: Add spdif sound card support
3f1b2e8d9e29 arm64: dts: mba8xx: Add missing #interrupt-cells
dd5af1f60a28 arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
f461418b3107 ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
dbaddd2cc383 ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
6a28d56cd75a arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
68f02dd7e55f arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
06e63f07db24 arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
65f27cc9ca1b arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
ec091103f662 arm64: dts: imx8mn: Slow default video_pll clock rate
f3ed68d12445 arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
825a35212289 arm64: dts: imx8mp-beacon: Enable Bluetooth
e32a570a61aa ARM: dts: imx6ul: Set macaddress location in ocotp
48b05a3282bd arm64: dts: freescale: minor whitespace cleanup
4b0cf920e774 arm64: dts: allwinner: h616: Add thermal sensor and zones
d0665f60cec0 ARM: dts: sun8i: Open FETA40i-C regulator aldo1
f0c099b60ae3 arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
01ae6c03a880 dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
c763b1cf0ca7 arm64: dts: allwinner: h616: minor whitespace cleanup
fba9e58bbd03 arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX
c6b7cf5d4b69 arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
13d73fcac8c9 arm64: dts: allwinner: h616: Add 32K fanout pin
05bdbb1eb3fd arm64: dts: allwinner: Add Jide Remix Mini PC support
0df51b232403 dt-bindings: arm: sunxi: document Remix Mini PC name
898b36322bb2 dt-bindings: vendor-prefixes: add Jide
70e735bb236e arm64: dts: allwinner: h616: Add SPDIF device node
10969c04cb6e arm64: dts: allwinner: h616: Add DMA controller and DMA channels
c5182cdc0aa8 arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
e31d5ca612d6 dt-bindings: sram: narrow regex for unit address to hex numbers
013b1096017d ARM: dts: microchip: sama7g5: add sama7g5 compatible
782f527e1b30 ARM: dts: microchip: sam9x60: align dmas to the opening '<'
d08950521775 ARM: dts: microchip: sama7g5: align dmas to the opening '<'
c9cdb533541e ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
28a13f689e75 ARM: dts: microchip: sama7g5: Add flexcom 10 node
57fb3296fc2d ASoC: dt-bindings: microchip: add sam9x7
81a8f19d991d ASoC: dt-bindings: atmel-classd: add sam9x7 compatible
c1e8427eb3df dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
708077cf30a4 arm64: tegra: Remove Jetson Orin NX and Jetson Orin Nano DTSI
14b1c490371e arm64: tegra: Add audio support for Jetson Orin NX and Jetson Orin Nano
5bdc0a8fed68 arm64: tegra: Define missing IO ports
8ff1bf770a0c arm64: tegra: Move AHUB ports to SoC DTSI
9fd53de0ed30 arm64: tegra: Add USB Type-C controller for Jetson AGX Xavier
6c9a92242095 arm64: tegra: Add USB device support for Jetson AGX Xavier
495a87da7a47 arm64: tegra: Add current monitors for Jetson Xavier
426c1ddbd76b arm64: tegra: Add AXI configuration for Tegra234 MGBE
134b7a20eea2 dt-bindings: mfd: Convert atmel-flexcom to json-schema
7268c6969288 dt-bindings: mfd: cros-ec: Add properties for GPIO controller
a5c0c33c25f1 dt-bindings: mfd: ti,twl: Document system-power-controller
507cf9210c91 dt-bindings: net: wireless: qcom: Update maintainers
a9219f105d93 dt-bindings: mfd: syscon: Add ti,am654-serdes-ctrl compatible
37c3dbbbca5d dt-bindings: mfd: syscon: Add ti,j784s4-pcie-ctrl compatible
ef9712ce90c9 dt-bindings: mfd: atmel,hlcdc: Convert to DT schema format
fc3911fb624f dt-bindings: mfd: qcom,tcsr: Add compatibles for QCM2290 and SM6115
bcc7a549de96 dt-bindings: mfd: iqs62x: Do not override firmware-name $ref
e3889bfdf9d5 dt-bindings: media: rkisp1: Add i.MX8MP ISP to compatible
e7d16b884c9d dt-bindings: timer: add Ralink SoCs system tick counter
f4535baea464 dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema
169fa31aecaa dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema
9a6e22b46113 dt-bindings: PCI: qcom,pcie-sc8180x: Move SC8180X to dedicated schema
e114fb24a186 dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema
88e9e05efe99 dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema
977832dca6ab dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema
53908f6ff54c dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema
96931e6b08ab dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema
3c9f28bcffc2 dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema
c2f1d4a9447a arm64: dts: renesas: rzg2l-smarc: Enable DU and link with DSI
b39f9a0e920d arm64: dts: renesas: r9a07g054: Add DU node
3ecd2f1980c9 arm64: dts: renesas: r9a07g044: Add DU node
93d319ea783c arm64: dts: lx2160a: Fix DTS for full PL011 UART
8365edf2f65e arm64: dts: ls1088a: Add the PME interrupt for PCIe EP node
084a47a95058 arm64: dts: imx8qm: add i2c1 for imx8qm-mek board
d84b45a3c712 arm64: dts: imx8qm: add i2c4 and i2c4_lpcg node
9d3bb1c53622 ASoC: Revert "ASoC: dt-bindings: Update example for enabling USB offload on SM8250"
7ada2cb724f2 riscv: dts: add resets property for uart node
a034d20d33af riscv: dts: add reset generator for Sophgo SG2042 SoC
b312f7c28451 ARM: dts: imx53-qsb: add support for the HDMI expander
65d763356aad arm64: dts: imx8mp: Enable SAI audio on Data Modul i.MX8M Plus eDM SBC
c3b757a52529 arm64: dts: imx8: Fix lpuart DMA channel order
a9c570888e1c arm64: dts: freescale: imx8-ss-dma: Fix edma3's location
1880684dfc18 arm64: dts: imx8dxl update edma0 information
95a51114540e arm64: dts: imx8dxl: add fsl-dma.h dt-binding header file
87cc839ce871 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
595539769055 dt-bindings: vendor-prefixes: Add missing prefixes used in compatibles
2b8f61f2af78 dt-bindings: display: convert Atmel's HLCDC to DT schema
d4e9fb508b98 dt-bindings: display/msm: Document MDSS on X1E80100
26ae54a934e7 dt-bindings: display/msm: Document the DPU for X1E80100
eec4611e4fa5 dt-bindings: arm-smmu: Document SM8650 GPU SMMU
011fc2593f52 dt-bindings: arm-smmu: Fix SM8[45]50 GPU SMMU 'if' condition
f45f80911a1e ARM: tegra: Add device-tree for LG Optimus 4X HD (P880)
c99ab6147bdd ARM: tegra: Add device-tree for LG Optimus Vu (P895)
9668ead0c4a9 ARM: tegra: nexus7: Add missing clock binding into sound node
1a7c7ca1209d dt-bindings: arm: tegra: Add LG Optimus Vu P895 and Optimus 4X P880
55fa85648879 arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
3040579f9058 dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
ac30a4ade02e dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts
cf713971ea71 dt-bindings: arm-smmu: Add QCM2290 GPU SMMU
cfbcf932a683 arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support
7b0d1d64e101 arm64: dts: renesas: r8a779h0: Add RPC node
cf8ea631a9d7 arm64: dts: renesas: r8a779h0: Add DMA support
44de0122e321 arm64: dts: renesas: gray-hawk-single: Add eMMC support
697c226a4355 arm64: dts: renesas: r8a779h0: Add SD/MMC node
bc3ce3810946 ARM: dts: renesas: r8a7778: Add missing reg-names to sound node
59d2898af1c8 arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support
e4684cc943fe arm64: dts: renesas: gray-hawk-single: Add Ethernet support
08896ba8e650 arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support
fe2d22e4ae91 arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes
4c2e92819772 arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes
d857aea85b27 arm64: dts: renesas: r9a08g045: Add PSCI support
ac45f97b1f9c arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs
aef97a58051b arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node
68b5a3b20687 arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes
5a4108c215f6 arm64: dts: renesas: r8a779h0: Add CA76 operating points
bd25260cfef9 arm64: dts: renesas: r8a779h0: Add CPU core clocks
291552f30777 arm64: dts: renesas: r8a779h0: Add CPUIdle support
20170eff3c40 arm64: dts: renesas: r8a779h0: Add secondary CA76 CPU cores
4c3851d7302a arm64: dts: renesas: r8a779h0: Add L3 cache controller
149125c48481 arm64: dts: renesas: r8a779h0: Add GPIO nodes
e6842397bea1 arm64: dts: renesas: gray-hawk-single: Add I2C0 and EEPROMs
4ab7a0fae505 arm64: dts: renesas: r8a779h0: Add I2C nodes
4f678406736f arm64: dts: renesas: ulcb-kf: Adapt sound 5v regulator to schematics
ab5123a5fcbb arm64: dts: renesas: ulcb-kf: Adapt 1.8V HDMI regulator to schematics
36bd3f79100c arm64: dts: renesas: ulcb-kf: Add regulators for PCIe ch1
d79c233e5296 arm64: dts: renesas: gray-hawk-single: Add serial console pin control
adb055f45503 arm64: dts: renesas: r8a779h0: Add pinctrl device node
393149daa9ec dt-bindings: net: wireless: mt76: allow all 4 interrupts for MT7981
abc93201d108 dt-bindings: net: wireless: mt76: add interrupts description for MT7986
6ff46183ee46 dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
caaf33bab010 dt-bindings: reset: mobileye,eyeq5-reset: add bindings
d627a28b5d6f dt-bindings: clock: mobileye,eyeq5-clk: add bindings
ebd3bcd073ce dt-bindings: clock: ast2600: Add FSI clock
d19d06cdbb21 dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs
f907dd749888 dt-bindings: clock: mediatek: convert SSUSBSYS to the json-schema clock
77f559281267 dt-bindings: clock: mediatek: convert PCIESYS to the json-schema clock
5776acd8f40b dt-bindings: clock: mediatek: convert hifsys to the json-schema clock
2b71a4051c65 dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
d5d9be3159cd ARM: dts: integrator: Fix up VGA connector
e7ff0fa9dc10 ARM: dts: versatile: Fix up VGA connector
5cc0ca358e86 ARM: dts: arm: realview: Fix development chip ROM compatible value
17690d898c6b arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
1a04d9e2ea04 arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node
037f82133c88 arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
b9b4934fd72d arm64: dts: ti: k3-am69-sk: Add support for OSPI flash
54bdd26cd110 arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board
5ddb529be866 arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
2bc64591456d arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
fb6e8cb37b07 arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
4a664d32a079 arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
0a3c08b6205b arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1
6d9068d2f3e7 arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl
8f04b7849578 arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux
c3982938ea86 dt-bindings: display: renesas,rzg2l-du: Document RZ/V2L DU bindings
62d59754ec63 dt-bindings: display: Document Renesas RZ/G2L DU bindings
b9138e8af159 arm64: tegra: Use consistent SD/MMC aliases on Tegra234
dcff839661ba arm64: dts: amlogic: add fbx8am DT overlays
0d16b6bd5803 ARM: dts: gemini: Fix switch node names on Vitesse switches
81e1d1cfd2f9 ARM: dts: gemini: Map reset keys to KEY_RESTART
915ebb1bf1e0 ARM: dts: gemini: Fix wiligear compatible strings
d8869f38c863 ARM: dts: gemini: Fix switch node names in the DIR-685
4466332a360b ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
8d8332ce62c5 dt-bindings: reset: sophgo: support SG2042
357d5bbac5af ASoC: Intel: avs: Fixes and new platforms support
ed4851e1d924 regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
bcf5ae8600f6 regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
90ad8fbfa7f9 Merge tag 'memory-controller-drv-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
6a8fb7b89e73 arm64: dts: qcom: sm6115: fix USB PHY configuration
0dc3ecab7183 Merge tag 'linux-can-next-for-6.9-20240220' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
f923d17647b5 MIPS: mobileye: Add EPM5 device tree
885d1e731299 MIPS: mobileye: Add EyeQ5 dtsi
7fb9ce7c1dde dt-bindings: mips: Add bindings for Mobileye SoCs
e3797e6a3708 dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core
9a705909b63d dt-bindings: mips: cpus: Sort the entries
e0340332869b dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd.
011bf078c7bc dt-bindings: pinctrl: renesas,pfc: Document R-Car V4M support
49888873d596 dt-bindings: net: fec: add iommus property
80733980e6ba dt-bindings: iio: adc: ti-ads1298: Add bindings
26a3005ca5c0 dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
d64846638639 dt-bindings: adc: axi-adc: update bindings for backend framework
a3fc6ec1428b dt-bindings: adc: ad9467: add new io-backend property
c0d436471a5f regulator: Merge up v6.8-rc5
52dcafce5828 dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM6150 compatible
66f7b7966dfc arm64: dts: ti: Add common1 register space for AM62A SoC
6b911cea73bb arm64: dts: ti: Add common1 register space for AM62x SoC
bb6e999b30ab arm64: dts: ti: Add common1 register space for AM65x SoC
2a98a4ff884d arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
b5c66885729f dt-bindings: display: simple: Add boe,bp082wx1-100 8.2" panel
0b9a359a81b7 dt-bindings: display: ti,am65x-dss: Add support for common1 region
0033e16adcd4 dt-bindings: renesas: Document preferred compatible naming
1771fa16d31e dt-bindings: ata: convert MediaTek controller to the json-schema
127ae13f4e5e arm64: dts: mt7986: add port@5 as CPU port
57f255ff84ed arm64: dts: mt7622: add port@5 as CPU port
1e471beb8eea ARM: dts: meson8b: fix &hwrng node compatible string
320da6153b8a ARM: dts: meson8: fix &hwrng node compatible string
9625cfa0c727 ARM: dts: meson: fix bus node names
f496b04c1652 arm64: dts: amlogic: add fbx8am board
686e2be425fd dt-bindings: arm: amlogic: add fbx8am binding
48371b0670ac dt-bindings: vendor-prefixes: add freebox
471f9b9dd5e2 arm64: dts: amlogic: replace underscores in node names
6e0fb3cc9b68 arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port
7526121625ee dt-bindings: interconnect: qcom,rpmh: Fix bouncing @codeaurora address
fcda7c3e7ef7 Merge 6.8-rc5 into usb-next
670cbcdfbb09 arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support
cea3277e3b5e arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes
eb0aea3a7c5a Merge 6.8-rc5 into tty-next
c07c11c8be59 arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node
59d465b82cb4 arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes
16af8c673aff arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes
87f154491e63 arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs
722bd88c8fab arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC
18c8263c1ec1 arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC
73f1cbbcb198 arm64: dts: ti: k3-am62a7-sk: Enable eMMC support
973681d9002a arm64: dts: ti: k3-am62a-main: Add sdhci2 instance
4430a5c5a0ec arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
be340f86aaf1 arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
49cf8bb8b63f arm64: dts: qcom: replace underscores in node names
8f9d0aa368d0 ARM: dts: qcom: samsung-matisse-common: Add UART
ce30f2d31d9c ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
afbdd6233c4a ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
6a80ca4b242a dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
3cef33d6916c dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
e4d2d663cf96 arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0
d43ac341179d arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0
80e20b3b69c9 arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0
35877fcaea3a arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0
cac67785c0a6 arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219
b1d7814ca372 arm64: dts: ti: k3-j784s4-main: Add CSI2RX capture nodes
b6b2d86e2411 arm64: dts: ti: k3-j721s2-main: Add CSI2RX capture nodes
58403c60add6 arm64: dts: ti: k3-j721e-main: Add CSI2RX capture nodes
4796014c5f92 arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux
b599ef1ba8ff arm64: dts: ti: k3-am69-sk: Enable camera peripherals
248c870c7bd6 arm64: dts: ti: k3-am68-sk-base-board: Enable camera peripherals
a5f6b550f77b arm64: dts: ti: k3-j784s4-evm: Enable camera peripherals
f70c4ae50ecf arm64: dts: ti: k3-j721s2-common-proc-board: Enable camera peripherals
4141c6b09a96 dt-bindings: i3c: drop "master" node name suffix
f3ca3a16bd19 dt-bindings: timer: nxp,sysctr-timer: support i.MX95
19b1a141c8dd dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block
15c348192cc2 dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632
3c201cdbc89a dt-bindings: iio: humidity: hdc3020: add interrupt bindings in example
0fc77339f456 dt-bindings: iio: afe: voltage-divider: Add io-channel-cells
7adf6f669393 dt-bindings: iio: imu: st_lsm6dsx: add asm330lhhxg1
bd37e5428ced dt-bindings: iio: frequency: add admfm2000
f6c7124a3d91 dt-bindings: usb/ti,am62-usb.yaml: Add PHY2 register space
3102faf7d698 dt-bindings: usb: microchip,usb5744: Remove peer-hub as requirement
d403cb0d5128 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMIC GLINK
7ab947b60396 dt-bindings: usb: dwc3: drop 'snps,host-vbus-glitches-quirk'
e007ca0c7920 ASoC: dt-bindings: Update example for enabling USB offload on SM8250
14bd5c629408 ASoC: dt-bindings: Add Q6USB backend
86b2f37571d9 arm64: dts: ti: Add reserved memory for watchdog
0ffb30594139 arm64: dts: qcom: pm4125: define USB-C related blocks
437f7c2c748a arm64: dts: qcom: sa8540p-ride: disable pcie2a node
ddc97b021a4f arm64: dts: qcom: sc7280: add slimbus DT node
174b19d0a453 dt-bindings: display: ltk500hd1829: add variant compatible for ltk101b4029w
9990fd362767 dt-bindings: display: panel-lvds: Add compatible for admatec 9904370 panel
3a9936a295c2 dt-bindings: vendor-prefixes: add prefix for admatec GmbH
11b2a690403f arm64: dts: qcom: sc7280: Add capacity and DPC properties
23437543023d ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices
cabc075cf325 ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
484c003d94ab ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
6445cb8886be ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
98ba5545146c ARM: dts: qcom: msm8960: declare SAW2 regulators
b54dea12770f ARM: dts: qcom: apq8064: declare SAW2 regulators
4dce2cf9f83d ARM: dts: qcom: ipq8064: rename SAW nodes to power-manager
5b13a9611268 ARM: dts: qcom: ipq4019: rename SAW nodes to power-manager
0ec0f547bc86 ARM: dts: qcom: msm8974: rename SAW nodes to power-manager
9c6828f9c895 ARM: dts: qcom: msm8960: rename SAW nodes to power-manager
d5acf25ed148 ARM: dts: qcom: apq8084: rename SAW nodes to power-manager
643db1cecca9 ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
4de620145e88 ARM: dts: qcom: ipq8064: use SoC-specific compatibles for SAW2 devices
c44fb47e47a5 ARM: dts: qcom: ipq4019: use SoC-specific compatibles for SAW2 devices
5e99522aa387 ARM: dts: qcom: msm8960: use SoC-specific compatibles for SAW2 devices
75a6d010f715 ARM: dts: qcom: msm8974: use new compat string for L2 SAW2 unit
9eb4395e3cbc ARM: dts: qcom: apq8084: use new compat string for L2 SAW2 unit
0cc21b045573 arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
adaff156bd89 arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
567a4e2c1bfd arm64: dts: qcom: sm8150: correct PCIe wake-gpios
aff4851c71af arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
d12e2e81b378 dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
87cb0efb080c dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings
78779d5162e9 dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
90689200835c arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
49fc8baa3dd8 arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
3bb88ee4bafc dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
08488eb0c95c arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
9230383364ef arm64: dts: qcom: sm6350: Add interconnect for MDSS
93d1070a237b dt-bindings: can: xilinx_can: Add 'xlnx,has-ecc' optional property
09c2905a6449 dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
8500691f667d dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
7b382eea018b arm64: tegra: Enable cros-ec-spi as wake source
73f09474de21 ARM: tegra: Enable cros-ec-spi as wake source
9c3c23577ad9 dt-bindings: tegra: pmc: Update scratch as an optional aperture
296aea7e0f2a dt-bindings: display: panel: Add Himax HX83112A
5b0ce634f06d dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema
01f41446bb7f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
87dd58b7c6ca dt-bindings: mmc: renesas,sdhi: Document R-Car V4M support
ec136bb18fcc arm64: dts: ti: Add support for TI J722S Evaluation Module
4dd9e11aa40f arm64: dts: ti: Introduce J722S family of SoCs
1339c374a4c1 dt-bindings: arm: ti: Add bindings for J722S SoCs
723c10f0bd63 arm64: dts: ti: iot2050: Support IOT2050-SM variant
4a95da5a5df9 arm64: dts: ti: iot2050: Annotate LED nodes
a2119b7f92bd arm64: dts: ti: iot2050: Factor out DP related bits
a3f672abd86f arm64: dts: ti: iot2050: Factor out enabling of USB3 support
0f7fd425cef9 arm64: dts: ti: iot2050: Factor out arduino connector bits
326a69a3e459 arm64: dts: ti: iot2050: Disable R5 lockstep for all PG2 boards
9f6227cced13 dt-bindings: arm: ti: Add binding for Siemens IOT2050 SM variant
4c8ad6e37e97 arm64: dts: ti: k3-am62-main: disable usb lpm
58003d5a29e5 arm64: dts: ti: verdin-am62: Set VDD CORE minimum voltage to 0.75V
09148e5825bc arm64: dts: ti: k3-am62-wakeup: Configure ti-sysc for wkup_uart0
8d7152a47403 arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan
16c636f5b152 arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number
2932b4306805 arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number
f6c375e9f85d arm64: dts: ti: verdin-am62: add support for Verdin USB1 interface
309045be68da arm64: dts: ti: Add DT overlay for PCIe + USB3.0 SERDES personality card
2979217a850f arm64: dts: ti: Add DT overlay for PCIe + USB2.0 SERDES personality card
b70ff6a5d411 dt-bindings: w1: UART 1-Wire bus
21e00d907bfb dt-bindings: serial: allow onewire as child node
1f162c88f711 dt-bindings: pwm: mediatek,mt2712: add compatible for MT7988
b69225cd6653 dt-bindings: atmel,hlcdc: convert pwm bindings to json-schema
4fc4f31db241 dt-bindings: pxa-pwm: Convert to YAML
61f4ac7c5c90 ARM: dts: vexpress: Set stdout-path to serial0 in the chosen node
199bf4b635e6 arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
73d46717fb3d ARM: dts: qcom: msm8226: Add watchdog node
01815a93d9ab dt-bindings: auxdisplay: hit,hd44780: use defines for GPIO flags
41e657a00f9c dt-bindings: auxdisplay: adjust example indentation and use generic node names
81b0dd090434 arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
3fa556edfd69 arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
8761bb9477f3 arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
3419b50ca541 arm64: dts: qcom: minor whitespace cleanup
1a30651d27f6 arm64: dts: qcom: ssm7125-xiaomi: drop incorrect UFS phy max current
8f644a3c370b arm64: dts: qcom: x1e80100-crd: add sound card
22e29ff5c4c3 arm64: dts: x1e80100: correct DMIC2 and DMIC3 pin config node names
b32ccff427b3 arm64: dts: sm8650: correct DMIC2 and DMIC3 pin config node names
8b41c24a5900 arm64: dts: sm8550: correct DMIC2 and DMIC3 pin config node names
d0bad83ec278 arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names
736ebb0686f6 arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
33ef3b7fb778 dt-bindings: can: tcan4x5x: Document the wakeup-source flag
11322433ed0f dt-bindings: net: dp83826: support TX data voltage tuning
a745442704dd ARM: dts: stm32: lxa-tac: reduce RGMII interface drive strength
bdbd2fbe2a1f arm64: dts: mediatek: replace underscores in node names
bb7b4de1613f pmdomain: Merge branch dt into next
20b8bae8b8eb arm64: dts: ti: k3-am62a: Make the main_conf node a simple-bus
e42f80bc5bcf arm64: dts: ti: k3-am62: Make the main_conf node a simple-bus
8ba7dd15abdd arm64: dts: ti: k3-j7200: Make the FSS node a simple-bus
42ed47d60a80 arm64: dts: ti: k3-j721s2: Convert serdes_ln_ctrl node into reg-mux
bf6f8e6f98e5 arm64: dts: ti: k3-j721s2: Convert usb_serdes_mux node into reg-mux
0167a788d9c5 arm64: dts: ti: k3-j721e: Convert usb_serdes_mux node into reg-mux
124c59a52517 arm64: dts: ti: k3-j721e: Convert serdes_ln_ctrl node into reg-mux
ebb5990bd126 arm64: dts: ti: k3-j7200: Convert usb_serdes_mux node into reg-mux
c0c92c3b24bd arm64: dts: ti: k3-j7200: Convert serdes_ln_ctrl node into reg-mux
8c7e27a256ed arm64: dts: ti: k3-am64: Convert serdes_ln_ctrl node into reg-mux
ecaaf99dee6f arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers
546dd2b71775 arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains
845392fb2a8c ARM: dts: qcom: msm8960: expressatt: Add mXT224S touchscreen
a5fc0fcda8d3 ARM: dts: qcom: msm8960: Add gsbi3 node
e5357a45e304 ARM: dts: qcom: msm8226: Add CPU and SAW/ACC nodes
df98c13b52f1 ARM: dts: qcom: msm8226: Sort and clean up nodes
4250f1c8ff79 ARM: dts: qcom: msm8974: correct qfprom node size
7d8cff577be7 dt-bindings: arm: qcom,ids: Add IDs for SM8475 family
ee8caed03c87 arm64: dts: qcom: sdm845: Enable cros-ec-spi as wake source
6eef1cbc79c9 arm64: dts: qcom: sc7280: Enable cros-ec-spi as wake source
097f3128d091 arm64: dts: qcom: sc7180: Enable cros-ec-spi as wake source
1a1c9101358c arm64: dts: qcom: sdm845: Use the Low Power Island CX/MX for SLPI
292108e317ec arm64: dts: qcom: msm8996: Define UFS UniPro clock limits
71aab956985a arm64: dts: qcom: qcs6490-rb3gen2: Declare GCC clocks protected
5a7b32324b50 arm64: dts: qcom: sc8280xp-pmics: Define adc for temp-alarms
c7cdefde3890 arm64: dts: qcom: sc8280xp-crd: Add PMIC die-temp vadc channels
fc4657cf641c dt-bindings: net: qca,ar9331: convert to DT schema
f8930a53d1df arm64: dts: rockchip: Add USB3.0 to Indiedroid Nova
5e1a3b5538e5 arm64: dts: rockchip: adjust phy-handle name on rock-pi-e
67a655c02d0c arm64: dts: rockchip: fix rk3399 hdmi ports node
1ce4f570403a arm64: dts: rockchip: fix rk3328 hdmi ports node
fe75fb3e4156 ARM: dts: rockchip: fix rk322x hdmi ports node
d8715fea4366 ARM: dts: rockchip: fix rk3288 hdmi ports node
3693fdfce256 dt-bindings: display: rockchip,dw-hdmi: add power-domains property
a3f511793cc1 dt-bindings: display: rockchip: rockchip,dw-hdmi: remove port property
fdad3ea0d962 arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes
1619cbd3e975 arm64: dts: rockchip: add rs485 support on uart5 of px30-ringneck-haikou
2134fa3eaa7f arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou
7a4285c5d69e arm64: dts: rockchip: Add Powkiddy RGB10MAX3
b9b257004011 dt-bindings: arm: rockchip: Add Powkiddy RGB10MAX3
a3adfa889806 arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3
8c24e7309a68 dt-bindings: display: rocktech,jh057n00900: Document panel rotation
46ed672258f7 dt-bindings: display: Add Powkiddy RGB10MAX3 panel
01125f93dff3 dt-bindings: soc: rockchip: add rk3588 USB3 syscon
f12733bf8794 dt-bindings: soc: rockchip: add clock to RK3588 VO grf
94e3c5a3f928 docs: dt: writing-schema: document expectations on example DTS
fe91d6f4b5e3 docs: dt: writing-schema: explain additional/unevaluatedProperties
4a3d3359c02d docs: dt: writing-schema: clarify that schema should describe hardware
d91bf686801b dt-bindings: use capital "OR" for multiple licenses in SPDX
496c29b2e9a6 dt-bindings: vendor-prefixes: add smartrg
24ffa3c14c93 dt-bindings: misc: qcom,fastrpc: Compute callbacks can be DMA coherent
0723544f32df dt-bindings: soc: renesas: Preserve the order of SoCs based on their part numbers
a6d969083d23 clk: renesas: r8a779g0: Correct PFC/GPIO parent clocks
1c22386104aa ASoC: dt-bindings: fsl,imx-asrc: convert to YAML
0a4520722599 dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
82515ffc20b0 dt-bindings: mmc: fsl-imx-esdhc: add iommus property
54b4d099b066 dt-bindings: mmc: fsl-imx-esdhc: add i.MX95 compatible string
878060d5ab93 dt-bindings: power: rpmpd: Add MSM8974 power domains
ba7f2dd56d71 arm64: dts: amlogic: t7: minor whitespace cleanup
0e3777330164 Merge tag 'renesas-pinctrl-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
2b637c08d90d arm64: dts: amlogic: axg: initialize default SoC capacitance
56b8815ee298 arm64: dts: amlogic: axg: move cpu cooling-cells to common dtsi
38e9d49495a7 arch: arm64: dts: meson: a1: add assigned-clocks for usb node
04303030d8a7 arm64: dts: amlogic: meson-g12-common: Set the rates of the clocks for the NPU
96f1514933cd arm64: dts: amlogic: add reset controller for Amlogic C3 SoC
b6cee0d8e50c dt-bindings: i2c: mux: i2c-demux-pinctrl: Define "i2c-parent" constraints
cbcbd116c3bb dt-bindings: i2c: mux: i2c-demux-pinctrl: Drop i2c-mux.yaml reference
d21de1b0f205 dt-bindings: can: fsl,flexcan: add i.MX95 compatible string
18dd617a729c ASoC: dt-bindings: cs35l45: Add interrupts
d649337cab0d ASoC: dt-bindings: qcom,sm8250: Allow up to 8 codec DAIs
168cf4050131 arm64: dts: fsd: Add fifosize for UART in Device Tree
c49f54ab8258 arm64: dts: exynos: gs101: minor whitespace cleanup
761c7555e3a6 arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes
feb82cd75ca1 arm64: dts: mediatek: mt7986: reorder nodes
afeb2b683c6a arm64: dts: mediatek: mt7986: reorder properties
1f41c46b7784 arm64: dts: mediatek: Add Acelink EW-7886CAX
a9e4cb01cbbd dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point
a0d0e301bacb dt-bindings: vendor-prefixes: add acelink
6355f4d21fe2 arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board
ad8297de07f0 dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible
c878dc2878b8 arm64: dts: mediatek: mt8186: Add video decoder device nodes
86ae11dcbfb0 arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB
a1bccd014f43 arm64: dts: mediatek: Add MT8186 Magneton Chromebooks
f06a044c7c87 arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty
3d00e9da10ee arm64: dts: mediatek: Introduce MT8186 Steelix
2047c128ed63 arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool
0526f7bc6fb8 dt-bindings: arm: mediatek: Add MT8186 Magneton Chromebooks
089e49677706 dt-bindings: arm: mediatek: Add MT8186 Rusty Chromebook
f9d037124e77 dt-bindings: arm: mediatek: Add MT8186 Steelix Chromebook
f5956f4a6314 dt-bindings: arm: mediatek: Add MT8186 Tentacruel / Tentacool Chromebooks
38bba08bb5f5 dt-bindings: arm: mediatek: Sort entries by SoC then board compatibles
ae447c85bffd arm64: dts: mediatek: mt8186: Add jpgenc node
2ee45888f0f1 dt-bindings: media: mediatek-jpeg-encoder: change max iommus count
9dd1d78b9108 arm64: dts: mediatek: mt8186: Add venc node
928e533f64ce arm64: dts: mediatek: mt8186: fix VENC power domain clocks
10ccafc6dfc8 dt-bindings: media: mtk-vcodec-encoder: add compatible for mt8186
a26c81acaef4 arm64: dts: mediatek: mt8192: fix vencoder clock name
6d5ecd0c0bf1 dt-bindings: media: mtk-vcodec-encoder: fix non-vp8 clock name
44858bf6309d arm64: dts: mediatek: Add socinfo efuses to MT8173/83/96/92/95 SoCs
87674b38b34a arm64: dts: mediatek: mt8195: Enable cros-ec-spi as wake source
a5e0493deb44 arm64: dts: mediatek: mt8192: Enable cros-ec-spi as wake source
d8de0db07270 arm64: dts: mediatek: mt8183: Enable cros-ec-spi as wake source
e62bf57bf4ce arm64: dts: mediatek: mt8173: Enable cros-ec-spi as wake source
80f419da8e71 arm64: dts: mediatek: mt7988: add clock controllers
0da54052e647 arm64: dts: mediatek: Add initial MT7988A and BPI-R4
17df9b07965f dt-bindings: arm64: mediatek: Add MT7988A and BPI-R4
58b0724c52ef arm64: dts: mediatek: Add initial MT7981B and Xiaomi AX3000T
f2654823e7da dt-bindings: arm64: mediatek: Add MT7981B and Xiaomi AX3000T
ec60c59a2f5a arm64: dts: mediatek: mt8192-asurada: Remove CrosEC base detection node
4cc812e03139 arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg
a70fe7a32743 arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM
08e6a51e82bf arm64: dts: mediatek: mt7986: fix SPI nodename
0ce82b652753 arm64: dts: mediatek: mt7986: fix SPI bus width properties
1654679b7b86 arm64: dts: mediatek: mt7986: drop crypto's unneeded/invalid clock name
0db4b3814808 arm64: dts: mediatek: mt7986: fix reference to PWM in fan node
e14ff64a492a arm64: dts: mt8183: Move CrosEC base detection node to kukui-based DTs
5af22a48d387 dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for sa8775p
f0efaf410576 dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
a31e6ce97f3b dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
42aa700e6b6a Merge tag 'v6.8-rc4' into gpio/for-next
28ff43a9c5cf dt-bindings: hwmon: Add LTC4282 bindings
946976867e95 dt-bindings: hwmon: ina2xx: Describe ina260 chip
60a5255306fa dt-bindings: hwmon: ina2xx: Describe #io-channel-cells property
ccda6b1eb4cb dt-bindings: hwmon: ina2xx: Add label property
29abc2d8cf78 dt-bindings: display: msm: sm8650-mdss: Add missing explicit "additionalProperties"
ca193aa48798 dt-bindings: msm: qcom, mdss: Include ommited fam-b compatible
fb87bba01a93 dt-bindings: dsi-controller-main: Document missing msm8976 compatible
6e32138572e8 dt-bindings: net: Document Qcom QCA807x PHY package
d65891d631e7 dt-bindings: net: document ethernet PHY package nodes
05327165c680 arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
c48cf2ca774b arm64: dts: qcom: sm6115: drop pipe clock selection
0529c70be68e arm64: dts: qcom: pmi632: define USB-C related blocks
8f3c2d458408 arm64: dts: qcom: qcs6490-rb3gen2: Correct the voltage setting for vph_pwr
f077c9e8cdcc arm64: dts: qcom: qcm6490-idp: Correct the voltage setting for vph_pwr
ed36b9e79976 dt-bindings/perf: Add Arm CoreSight PMU
6bea5f945518 dt-bindings: pinctrl: cy8c95x0: Update gpio-reserved-ranges
ff6ea0429974 dt-bindings: pinctrl: nvidia,tegra234-pinmux: Restructure common schema
f8a5525e9f69 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
b64c0f80d53a spi: get rid of some legacy macros
adfae82db04a spi: dt-bindings: samsung: add google,gs101-spi compatible
7d4159bca342 dt-bindings: mfd: dlg,da9063: Convert da9062 to json-schema
84465d53e06e dt-bindings: mfd: dlg,da9063: Sort child devices
a5d5c9ca95f6 dt-bindings: thermal: Convert da906{1,2} thermal to json-schema
9491d890e23c dt-bindings: input: Convert da906{1,2,3} onkey to json-schema
bf94a53ad831 dt-bindings: mfd: dlg,da9063: Update watchdog child node
5d2f1ff23c1f dt-bindings: mfd: da9062: Update watchdog description
6d63119dedee dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
eadfdbf7cfd7 dt-bindings: i2c: renesas,rcar-i2c: Add r8a779h0 support
506140c4b36b dt-bindings: i2c: pca954x: Add custom properties for MAX7357
a3cf64f59235 arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole
66fd6a721305 arm64: dts: exynos: gs101: define USI12 with I2C configuration
bc3a8ffe73f6 arm64: dts: exynos: gs101: enable cmu-peric1 clock controller
85f5d68af4a0 Merge tag 'samsung-dt-bindings-clk-6.9-3' into next/dt64
eff597e8d6d7 Merge branch '20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org' into clk-for-6.9
9d58463252f8 Merge branch '20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz' into clk-for-6.9
53156f9a9b8b dt-bindings: samsung: exynos-sysreg: gs101-peric0/1 require a clock
f0fc02f810bc Merge tag 'samsung-dt-bindings-clk-6.9-3' into next/clk
3a17e325742d dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit
f8f976624cd6 ASoC: dt-bindings: atmel,asoc-wm8904: Convert to json-schema
e07e6605bd92 ARM: dts: samsung: exynos5420-galaxy-tab-common: add wifi node
833d20d41eff dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
0aff1be67191 dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200
61354e32b738 dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1
0ed441cb60fc Merge drm/drm-next into drm-misc-next
fa4e28b76a28 dt-bindings: phy: qmp-ufs: Fix PHY clocks
edf14e92f825 dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
db56af9d1adc dt-bindings: mmp-dma: convert to YAML
69f5e9afcf9a arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
d34aa18b328e arm64: dts: qcom: sm8550-hdk: correct WCD9385 route and port mapping
c5ac3bf2b9e9 arm64: dts: qcom: sm8650: Fix UFS PHY clocks
960dc14fb417 arm64: dts: qcom: sm8550: Fix UFS PHY clocks
5b487a71e59a arm64: dts: qcom: sm8350: Fix UFS PHY clocks
1019d3b3dd76 arm64: dts: qcom: sc8280xp: Fix UFS PHY clocks
d909cc2c57f0 arm64: dts: qcom: sc8180x: Fix UFS PHY clocks
32798a824479 Merge branch '20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org' into HEAD
647fc2ed0999 dt-bindings: trivial-devices: sort entries alphanumerically
d87ada5ab8a5 arm64: dts: qcom: sm8250: Fix UFS PHY clocks
71ea2327fa6f arm64: dts: qcom: sm8150: Fix UFS PHY clocks
64da7648e2cd arm64: dts: qcom: sm6350: Fix UFS PHY clocks
fd0f61fefaf5 arm64: dts: qcom: sm6125: Fix UFS PHY clocks
4d7ec8559332 arm64: dts: qcom: sm6115: Fix UFS PHY clocks
1b77533e4915 arm64: dts: qcom: sdm845: Fix UFS PHY clocks
18872b4ddd5f arm64: dts: qcom: msm8998: Fix UFS PHY clocks
9a197a6489bc arm64: dts: qcom: msm8996: Fix UFS PHY clocks
1c92660aee2a dt-bindings: clock: qcom: Add missing UFS QREF clocks
a20d2718cc23 arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
6ed4e54f3d0a arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
1816222d14d0 arm64: dts: qcom: msm8953: Add GPU
289d949a2fa0 arm64: dts: qcom: msm8953: Add GPU IOMMU
d8789c7d4887 arm64: dts: qcom: msm8953: add reset for display subsystem
e3e73e0578cb Merge branch '20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz' into arm64-for-6.9
6beb0be6d4fc dt-bindings: clock: gcc-msm8953: add more resets
f84a5b88e932 arm64: dts: qcom: sm8650-mtp: add Audio sound card node
92c1bbcc400a arm64: dts: qcom: sm8650-qrd: add Audio nodes
b0e0830701c8 arm64: dts: qcom: sm8650: Add dma-coherent property
d16840039a98 arm64: dts: qcom: sm8550: Add dma-coherent property
f515a57656b3 arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
03371084ea86 arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
a5d205597cdb arm64: dts: qcom: ipq6018: add thermal zones
a536a392c199 arm64: dts: qcom: ipq6018: add tsens node
93475982136a arm64: dts: qcom: sm8550-mtp: add correct analogue microphones
94d226438171 arm64: dts: qcom: sm8550-qrd: add correct analogue microphones
da9e6dd17060 arm64: dts: qcom: sm8550-mtp: correct WCD9385 TX port mapping
19f3548ab2ee arm64: dts: qcom: sm8550-qrd: correct WCD9385 TX port mapping
70387c1a6e20 arm64: dts: qcom: sm6350: Add tsens thermal zones
14a45c7e6691 arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
62ceca9a978f arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
1243c8cd7c3d arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
41b532e3d8fb arm64: dts: qcom: sc7280: Update domain-idle-states for cluster sleep
9067770d28da arm64: dts: qcom: sdm630-nile: Enable and configure PM660L WLED
59950318f199 dt-bindings: arm: qcom: drop the superfluous device compatibility schema
5906b6dbb4b8 arm64: dts: qcom: sm8650: add missing qlink_logging reserved memory for mpss
1a5594201259 arm64: dts: qcom: ipq9574: Enable Inline Crypto Engine for MMC
6c5dcfe50eeb arm64: dts: qcom: x1e80100-crd: add WSA8845 speakers
641aa52f01a1 arm64: dts: qcom: x1e80100-crd: add WCD9385 Audio Codec
adad71a77e32 arm64: dts: qcom: x1e80100: add Soundwire controllers
fcb540f3e31d arm64: dts: qcom: x1e80100: add ADSP audio codec macros
fe7149ac0fe1 arm64: dts: qcom: x1e80100: add LPASS LPI pin controller
89656eaec676 arm64: dts: qcom: x1e80100: add ADSP GPR
a24c8ba00dac dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
552c8b9c51bd riscv: dts: microchip: add specific compatible for mpfs pdma
0359a2873d27 arm64: dts: qcom: ipq6018: add QUP5 I2C node
2109082a047e arm64: dts: qcom: x1e80100-qcp: Fix supplies for LDOs 3E and 2J
ad5e70a893a6 arm64: dts: qcom: x1e80100-qcp: Enable more support
70e1e5caf55a arm64: dts: qcom: x1e80100-crd: Enable more support
e7f823deb502 arm64: dts: qcom: x1e80100: Add display nodes
09888df4cabf arm64: dts: qcom: x1e80100: Add PCIe nodes
113e1447c4b7 arm64: dts: qcom: x1e80100: Add USB nodes
d042016c875e arm64: dts: qcom: x1e80100: Add TCSR node
1e12a915f76a arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes
21784a99d799 arm64: dts: qcom: x1e80100: Add QMP AOSS node
adac34e54b92 arm64: dts: qcom: x1e80100: Add SMP2P nodes
f6ae972c7d7a arm64: dts: qcom: x1e80100: Add IPCC node
f858f5571e59 Merge branch '20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org' into arm64-for-6.9
16f9c84b0c9a Merge branch '20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org' into clk-for-6.9
77ff05b89311 dt-bindings: clock: qcom: Document the X1E80100 Camera Clock Controller
9b09558a4d02 dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock Controller
009188ad89c1 dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller
619f14d3ee00 dt-bindings: clock: qcom: Document the X1E80100 Display Clock Controller
5c691ea9dfde dt-bindings: clock: Drop the SM8650 DISPCC dedicated schema
fd99a9349fc8 dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible
3de725e88fb0 arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
62872aebbbd8 dt-bindings: soc: imx: add missing clock and power-domains to imx8mp-hdmi-blk-ctrl
4ff28e3e2d94 ASoC: dt-bindings: atmel,sam9x5-wm8731: Convert to json-schema
906cab843596 riscv: dts: microchip: add missing CAN bus clocks
70bee5f22413 dt-bindings: can: mpfs: add missing required clock
91d53111ca13 dt-bindings: clock: mpfs: add more MSSPLL output definitions
7564dfecdf9e Revert "media: ov08x40: Reduce start streaming time"
230eabe62cac arm64: dts: ti: iot2050*: Clarify GPL-2.0 as GPL-2.0-only
81c25598663e arm64: dts: ti: phycore*: Add MIT license along with GPL-2.0
49ad241d7ba0 arm64: dts: ti: beagle*: Add MIT license along with GPL-2.0
af13011bc32a arm64: dts: ti: k3-serdes: Add MIT license along with GPL-2.0
97f615d94c52 arm64: dts: ti: k3-pinctrl: Add MIT license along with GPL-2.0
fb7c92cfa0d7 arm64: dts: ti: k3-j784s4: Add MIT license along with GPL-2.0
ef720a09d820 arm64: dts: ti: k3-j721s2: Add MIT license along with GPL-2.0
b5d3132ac896 arm64: dts: ti: k3-j721e: Add MIT license along with GPL-2.0
a08b6e3c500d arm64: dts: ti: k3-j7200: Add MIT license along with GPL-2.0
67b92cb4a9b8 arm64: dts: ti: k3-am65: Add MIT license along with GPL-2.0
4270ef124316 arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0
6bbb88ff7998 arm64: dts: ti: k3-am62p: Add MIT license along with GPL-2.0
0ffeaa9662f1 arm64: dts: ti: k3-am625: Add MIT license along with GPL-2.0
5db4fd731c54 arm64: dts: ti: k3-am62a7: Add MIT license along with GPL-2.0
99e9047746eb arm64: dts: ti: Use https for urls
3fa55a728a3d arm64: dts: imx8mn-evk: Add PDM micphone sound card support
8d8a62fd968d arm64: dts: imx8mm-evk: Add PDM micphone sound card support
151935e24c16 arm64: dts: imx8qm: add smmu stream id information
7ca27214673d arm64: dts: imx8qm: add smmu node
b9f9b709c278 arm64: dts: imx8dxl-evk: add flexcan2 and flecan3
f42aa20f9119 arm64: dts: imx8dxl-evk: add i2c3 and its children nodes
93d6366b8356 arm64: dts: imx8dxl: update flexcan[1-3] interrupt number
c5d90c61def2 arm64: dts: imx8mp-phyboard-pollux-rdk: add etml panel support
16c8d47dc262 arm64: dts: imx8mn-rve-gateway: remove redundant company name
b08765c243bb dt-bindings: arm: fsl: remove redundant company name
65cffffa0551 ARM: dts: samsung: exynos5420-galaxy-tab: decrease available memory
d01b22a61768 dt-bindings: ata: atmel: remove at91 compact flash documentation
d242043d9d60 arm64: dts: renesas: gray-hawk-single: Enable watchdog timer
2e8d8e405f93 arm64: dts: renesas: r8a779h0: Add RWDT node
35665cd38eb8 arm64: dts: renesas: Improve TMU interrupt descriptions
6c5ee3279bcd ARM: dts: renesas: Improve TMU interrupt descriptions
78e358d25cba ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
f53c235dce4f arm64: dts: freescale: imx8qm: add apalis eval v1.2 carrier board
c6a20bf4953d dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board
4a2797e6299b dt-bindings: display: imx: add binding for i.MX8MP HDMI TX
46daefc82714 arm64: dts: exynos: Add SPI nodes for Exynos850
864d0966e626 ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
ab38fa94e38c dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board
79c6446e27a7 ARM: dts: imx6: skov: add aliases for all ethernet nodes
00cba1b18156 arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support
ee42eae10f7a dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
1dcb02c43ac3 arm64: dts: imx8mp: Enable PCIe to Data Modul i.MX8M Plus eDM SBC
c35148dd66cc dt-bindings: firmware: xilinx: Describe soc-nvmem subnode
e4d158a009f2 arm64: dts: ls1012a: fix DWC3 USB VBUS glitch issue
2cc69dbdcc3b arm64: dts: ls1012a: add gpio for i2c bus recovery
86f029cb9916 arm64: dts: ls1012a: add big-endian property for PCIe nodes
1344dd97c94d arm64: dts: ls1012a: correct the size of dcfg block
eebf4e8a4de5 arm64: dts: ti: k3-j7200: use ti,j7200-padconf compatible
b2c927e92eb5 arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes
1ed877819eca arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP
b2e13a92bcd3 dt-bindings: drm/bridge: ti-sn65dsi86: Fix bouncing @codeaurora address
5aafe0eb29a5 dt-bindings: mux: restrict node name suffixes
959645b1cb6f ARM: dts: keystone: Replace http urls with https
9c307f485cc5 arm64: dts: ti: k3-am62a7-sk: Add HDMI support
33aa21cb5f84 arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS)
e197413922a3 arm64: dts: ti: phycore-am64: Add ADC
cbb614f03fe0 arm64: dts: ti: k3-j784s4: Fix power domain for VTM node
4979495296af arm64: dts: ti: k3-j721s2: Fix power domain for VTM node
66f98925474a arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node
8af95677c0a4 arm64: dts: ti: k3-j7200: Add support for multiple CAN instances
3416ecb8c84b arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain
b190cdb39a78 arm64: dts: ti: k3-j7200: Add support for CAN nodes
049925dbe4ef arm64: dts: ti: verdin-am62: mallow: add TPM device
d18d4a279eac arm64: dts: ti: k3-am64: Remove PCIe endpoint node
45e8e613d391 arm64: dts: ti: k3-am65: Remove PCIe endpoint nodes
9482566d8484 arm64: dts: ti: k3-j7200: Remove PCIe endpoint node
f2db5b44a21b arm64: dts: ti: k3-j7200: Enable PCIe nodes at the board level
1b1b2953ae47 arm64: dts: ti: k3-j721s2-som-p0: Do not split single items
1ab381b19847 arm64: dts: ti: k3-j721e-som-p0: Do not split single items
3bbf314c8e51 arm64: dts: ti: k3-j721e-sk: Do not split single items
9982ca1fa62d arm64: dts: ti: k3-j721e-beagleboneai64: Do not split single items
685e4624960e arm64: dts: ti: k3-j7200-som-p0: Do not split single items
bb743de0d3fe arm64: dts: ti: k3-am69-sk: Do not split single items
6081c21a3e9b arm64: dts: ti: k3-am68-sk-som: Do not split single items
7aebe586ccdc arm64: dts: ti: k3-am654-base-board: Do not split single items
756750059f96 arm64: dts: ti: iot2050: Do not split single items
83cac2593e26 arm64: dts: ti: k3-am642-sk: Do not split single items
c266381d0608 arm64: dts: ti: k3-am642-evm: Do not split single items
ff6e034104fc arm64: dts: ti: k3-am642-phyboard-electra: Add TPM support
986edbf094b5 arm64: dts: ti: Disable clock output of the ethernet PHY
140c5468b668 arm64: dts: ti: Add phase tags for memory node on J784S4 EVM and AM69 SK
fb6ffd10b764 arm64: dts: ti: k3-am625-beagleplay: Use the builtin mdio bus
abed090f1e99 arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0
0424a17ecb7a arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0
ac8143f3b013 dt-bindings: mtd: avoid automatically select from mtd.yaml
828b9467f60f media: dt-bindings: techwell,tw9900: Fix port schema ref
2b2619e4c6c5 dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI
141f2102cc12 ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
ffe7dc298435 arm64: dts: imx93: drop "master" I3C node name suffix
99af7a0dae65 ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
ff6929d462c4 dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
d3413ad34a12 arm64: dts: freescale: tqma9352: Update I2C eeprom compatible
ad2d1ba26a13 arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M
3b589ade448f dt-bindings: gpio: pca9570: Add label property
11eb3d98d38b dt-bindings: gpio: mvebu: Fix "unevaluatedProperties" to be false
9c0a4b40a3ac ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
fee43501308a arm64: dts: imx8mp-verdin: Label ldo5 and link to usdhc2
b8d7d5f3690b arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
188a8bb94d35 dt-bindings: arm: fsl: Add VAR-SOM-MX93 with Symphony
fecb422bac6a arm64: dts: ls1046a: Remove big-endian from thermal
78343d7acd50 ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
e57037e98946 ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
31d9e29f0d8e Merge tag 'drm-misc-next-2024-01-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
e6d71526460e dt-bindings: misc: xlnx,sd-fec: convert bindings to yaml
01b5de94aa82 Merge 6.8-rc3 into tty-next
7030aa5067b6 Merge 6.8-rc3 into usb-next
5f856030cc8b arm64: dts: rockchip: Add devicetree for Pine64 PineTab2
c87344c32c61 dt-bindings: arm64: rockchip: Add Pine64 PineTab2
6944e5df2f35 arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
9a90efccd7ee ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
9a2b5d99e0ff ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port
7051d52cf5b9 arm64: dts: imx8mp-venice-gw71xx: add TPM device
4ecbc5946cc5 arm64: dts: imx8mm-venice-gw71xx: add TPM device
3c805459dfd7 arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
af9118771e3c arm64: dts: imx8mm-venice-gw7901: add TPM device
bcc4aff9ee00 arm64: dts: imx8mm-venice-gw7901: add digital I/O direction control GPIO's
6ea0c6a49b64 ARM: dts: imx7-tqma7: Fix PMIC v33 rail voltage range
2482c75bff8e ARM: dts: imx7-mba7: Add missing vcc supply to i2c devices
4d19ec066c6b ARM: dts: imx7-tqma7: Add missing vcc supply to i2c eeproms
fda2672c8e68 ARM: dts: imx7d-mba7: Remove USB OTG related properties on USB node
f71b70123d20 ARM: dts: imx7-tqma7: rename node for SE97BTP
56382af8168e ARM: dts: imx7-tqma7: mark system data eeprom as read-only
59c9c040a0db ARM: dts: imx7-tqma7: remove superfluous status property
ac9f05a3b8ee ARM: dts: imx7-tqma7: restrict usdhc interface modes
54b93adb1393 ARM: dts: imx7-mba7: restrict usdhc interface modes
6980af2d9f17 ARM: dts: imx7-tqma7: Fix iomuxc node names
efad19cdde77 ARM: dts: imx7-mba7: Fix iomuxc node names
fe330835b74e ARM: dts: imx7-tqma7: fix EEPROM compatible for SE97BTP
77f6e05fdfa1 ARM: dts: imx7-mba7: Add i2c bus recovery
8f9993282d52 ARM: dts: imx7-tqma7: Add i2c bus recovery
4065cdaa82bd ARM: dts: imx7-mba7: Add SPI1_SS0 as chip select 3
10cde7452d93 ARM: dts: imx7-mba7: Add RTC aliases
67c6d0e81520 ARM: dts: imx7-mba7: Enable SNVS power key
2ccae767cb74 ARM: dts: imx7-mba7: Mark gpio-buttons as wakeup-source
235e861d016e ARM: dts: imx7[d]-mba7: hog Mini PCIe signals
cd553893ac90 ARM: dts: imx7[d]-mba7: disable PCIe interface
2faa76d25aef ARM: dts: imx7[d]-mba7: disable USB OC on USB host and USB OTG2
f9152233518d ARM: dts: imx7[d]-mba7: Move ethernet PHY reset into PHY node
0d8f0cba144c ARM: dts: imx7-tqma7/mba7: convert fsl,pins to uint32-matrix
c09e630c5912 arm64: dts: qcom: qcm6490-idp: Include PM7250B
edd0bc8b8d0b arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
4fe52e68f13c arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
cc592e051541 arm64: dts: qcom: sm8650-qrd: add USB-C Altmode Support
b789944a89fc arm64: dts: qcom: sm8550-qrd: enable Touchscreen
200b0b3875ef dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
5eaa8712fb96 dt-bindings: visionox-rm69299: Update maintainers
ae0b823f0536 dt-bindings: gpio: renesas,rcar-gpio: Add r8a779h0 support
d4458c6492e6 dt-bindings: net: ti: Update maintainers list
a3fa7f3f82f7 dt-bindings: net: ipq4019-mdio: document now supported clock-frequency
9c3280cd3020 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
19adc3b90590 Merge branch '20240201204421.16992-2-quic_amelende@quicinc.com' into drivers-for-6.9
b5c560279d08 dt-bindings: soc: qcom: Add qcom,pbs bindings
08d014730db7 regulator: dt-bindings: microchip,mcp16502: convert to YAML
bdef327947f5 arm64: dts: intel: agilex5: drop "master" I3C node name suffix
1c0d4ea255ee media: ov08x40: Reduce start streaming time
7d92af412d2e arm64: dts: exynos: Add PDMA node for Exynos850
1868ee800d4c arm64: dts: exynos: gs101: use correct clocks for usi_uart
5d5769f28954 arm64: dts: exynos: gs101: use correct clocks for usi8
dc00c7274ea6 dt-bindings: net: dsa: Add KSZ8567 switch support
58475bd50ec5 media: arm64: dts: st: add video encoder support to stm32mp255
380408454fb2 media: arm64: dts: st: add video decoder support to stm32mp255
4eea1b53e82e media: dt-bindings: media: Document STM32MP25 VDEC & VENC video codecs
39ecce7ee54a arm64: dts: imx8qxp: add GPU nodes
b206b48e8a91 arm64: dts: imx8qm: Correct edma3 power-domains and interrupt numbers
7a74326b4893 arm64: dts: imx8qm: Align edma3 power-domains resources indentation
0be926d25dbc arm64: dts: imx8qxp: mba8xx: Add analog audio output on MBa8Xx
43aab34e5e0c arm64: dts: imx8qxp: Add mclkout clock gates
8c7666d283be arm64: dts: imx8qxp: Add audio SAI nodes
a12fa3d0c150 arm64: dts: imx8qxp: Add audio clock mux node
6c44f7583fd5 arm64: dts: imx8qxp: Add ACM input clock gates
cf7ea553fe5a arm64: dts: freescale: add initial device tree for TQMa8Xx
98de130e34e4 dt-bindings: arm: add TQMa8Xx boards
dc089f5f4bb0 arm64: dts: imx: add imx8dxp support
a5a40554f207 dt-bindings: net: qcom,ipa: do not override firmware-name $ref
927f00767ef5 arm64: dts: imx8mm-kontron: Refactor devicetree for OSM-S module and board
dc0c1bca1831 arm64: dts: imx8mm-kontron: Add I2C EEPROM on OSM-S Kontron i.MX8MM
071edd561a01 arm64: dts: imx8mm-kontron: Remove useless trickle-diode-disable from RTC node
bc9a25d78a35 arm64: dts: imx8mm-kontron: Disable uneffective PUE bit in SDIO IOMUX
48e6dc42724c arm64: dts: imx8mm-kontron: Fix OSM-S devicetrees to match latest hardware
1749a50ca797 arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM module
6985d8cd5c40 arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL board
688fff06ac4e arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL OSM-S board
4b8efdb73a46 arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL board
123efe05e212 arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL OSM-S board
9f02292756b9 arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL i.MX8MM
928dc77f0003 arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S i.MX8MM
c2b4ecb58452 dt-bindings: fpga: Convert fpga-region binding to yaml
85d6c583d5f5 MAINTAINERS: Drop my "+dt" sub-address
0f6ed4032e99 dt-bindings: timer: renesas,tmu: Document input capture interrupt
05c9f46083ba arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes
aa403cfc2a6c arm64: dts: renesas: Add Gray Hawk Single board support
82a8a0a3e608 arm64: dts: renesas: Add Renesas R8A779H0 SoC support
356004f72bd0 Merge tag 'renesas-r8a779h0-dt-binding-defs-tag' into renesas-dts-for-v6.9
1200029387ce arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface
d58eb8846937 arm64: dts: renesas: r9a08g045: Add watchdog node
b1de14ce277c arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2
fe98cda6e099 dt-bindings: soc: renesas: Document R-Car V4M Gray Hawk Single
bcdc951ea508 dt-bindings: reset: renesas,rst: Document R-Car V4M support
55647b66aba2 pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
fc9d9f1cfef8 dt-bindings: interconnect: Remove bogus interconnect nodes
47509af4504a soundwire/SOF: add SoundWire Interface support for
f521b204bcd2 dt-bindings: interconnect: Add Qualcomm MSM8909 DT bindings
72ececa06e31 riscv: dts: starfive: beaglev-starlight: Setup phy reset gpio
0279da4a6715 riscv: dts: starfive: visionfive-v1: Setup ethernet phy
19f7725fe372 riscv: dts: starfive: jh7100-common: Setup pinmux and enable gmac
d05053a8b239 riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes
921e5e1327ef dt-bindings: net: starfive,jh7110-dwmac: Add JH7100 SoC compatible
7020ebc26757 dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
35d633af4efc dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support
1de76ced2497 dt-bindings: soc: xilinx: Add support for KV260 CC
c9aeb5c33863 dt-bindings: soc: xilinx: Add support for K26 rev2 SOMs
e36f379d8c82 dt-bindings: pinctr: pinctrl-zynq: Fix compatible string
c7a574ba2a6c dt-bindings: pinctrl: nuvoton,npcm845: Drop redundant type for "slew-rate"
da1b37add707 dt-bindings: pinctrl: Unify "input-debounce" schema
234d836b6a1a dt-bindings: input: document Goodix Berlin Touchscreen IC
8df2aa5a1297 arm64: dts: qcom: Add support for Xiaomi Redmi Note 9S
5c09bd2b6ce1 arm64: dts: qcom: sm7125-xiaomi-common: Add UFS nodes
5c38e796a3a1 arm64: dts: qcom: sc7180: Add UFS nodes
307cdcc3f9c2 dt-bindings: arm: qcom: Add Xiaomi Redmi Note 9S
d9eda103eb64 ARM: dts: qcom: apq8026-lg-lenok: Add vibrator support
2590e420cf2c ARM: dts: qcom: msm8960: expressatt: Add gpio-keys
9d906fe262e0 arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
6b10b59bd1db arm64: dts: qcom: sdm630: add USB QMP PHY support
329fb714e840 arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
ca14c11bb9a4 arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
5ce7895c7b2b dt-bindings: clock: qcom: Allow VDD_GFX supply to GX
3a9a9247f661 arm64: dts: qcom: sa8295p-adp: Enable GPU
08f93d65d530 arm64: dts: qcom: sa8295p-adp: add max20411
1129eea99cc1 arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc
14bc12ecdfe3 dt-bindings: interrupt-controller: convert MediaTek sysirq to the json-schema
77a4323bd64f dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatible for H616
82bf0037e8d8 dt-bindings: power: Add r8a779h0 SYSC power domain definitions
d98d5e6ce56e dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support
5ee26dab625b dt-bindings: bus: Document Broadcom GISB arbiter 74165 compatible
c6234d82a072 arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells
bc4ef25abdc1 arm64: dts: broadcom: bcmbca: bcm4908: use NVMEM layout for Asus GT-AC5300
b6e08822ed8c arm64: dts: renesas: r8a779g2: Add White Hawk Single support
7e3862db4c62 arm64: dts: renesas: Add Renesas R8A779G2 SoC support
51fc2376ba1d arm64: dts: renesas: white-hawk: Factor out common parts
a248c1746935 arm64: dts: renesas: white-hawk-cpu: Factor out common parts
fdea5d785497 arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
a77e323e0dc2 arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
3e8f05b2b81d arm64: dts: renesas: white-hawk-cpu: Restore sort order
e90ffb9d53b7 arm64: dts: renesas: r8a779g0: Add standalone White Hawk CPU support
eccddc31dfa9 arm64: dts: renesas: ulcb-kf: Add node for GNSS
3d3e628e12d6 arm64: dts: renesas: ulcb-kf: Drop duplicate 3.3v regulators
bf721e67a7fb Merge drm/drm-next into drm-misc-next
351548ba8841 dt-bindings: soc: renesas: Document R-Car V4H White Hawk Single
ad352af0d46f dt-bindings: nfc: ti,trf7970a: fix usage example
d4d212c5cf34 dt-bindings: display: panel-simple: add ETML1010G3DRA
6aee668021fc arm64: dts: qcom: sm7225-fairphone-fp4: Switch firmware ext to .mbn
aa54779772ae arm64: dts: qcom: rename PM2250 to PM4125
dbcb19ed3275 arm64: dts: qcom: qcm6490-fairphone-fp5: Add PMIC GLINK
dc376fa4a27c arm64: dts: qcom: sdm845-oneplus-common: improve DAI node naming
048423deb9a5 arm64: dts: qcom: qcm6490-fairphone-fp5: Add missing reserved-memory
b4d0c1c61afa arm64: dts: qcom: sc7280: Add static properties to cryptobam
f3f780c01899 arm64: dts: qcom: sa8775p: enable safety IRQ
fd61cbbd53a9 dt-bindings: clock: qcom,gcc-sm8150: Add gcc video resets for sm8150
30e2fa95b585 dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
27f4e6aa609c dt-bindings: Add reference to rs485.yaml
5e11848e4c98 dt-bindings: serial: renesas,hscif: Document r8a779h0 bindings
c7aaa6160c61 dt-bindings: serial: fsl-lpuart: support i.MX95
3ee8c19304d9 dt-bindings: serial: samsung: do not allow reg-io-width for gs101
d70fdb79f945 arm64: dts: qcom: apq8016-sbc-d3-camera: Use more generic node names
95830229bcb5 ARM: dts: qcom: msm8960: drop 2nd clock frequency from timer
4f433e3e9a04 ARM: dts: qcom: ipq4019-ap.dk01.1: align flash node with bindings
39065990752b ARM: dts: qcom: ipq4019-ap.dk01.1: use existing labels for nodes
a6106c8748a7 arm64: dts: qcom: split PCIe interrupt-names entries per lines
f1ac2340280d arm64: dts: qcom: sm8650: describe all PCI MSI interrupts
653638c9dceb arm64: dts: qcom: sm8550: describe all PCI MSI interrupts
90840a974369 arm64: dts: qcom: sm8450: describe all PCI MSI interrupts
c681c8ad796c arm64: dts: qcom: sm8350: describe all PCI MSI interrupts
9186fa649278 arm64: dts: qcom: sm8250: describe all PCI MSI interrupts
a2e5b5e27b91 arm64: dts: qcom: sm8150: describe all PCI MSI interrupts
ed0b4f3e69ba ARM: dts: qcom: msm8926-htc-memul: Add rmtfs memory node
3556e0895e7a dt-bindings: usb: dwc3: Add snps,host-vbus-glitches-quirk avoid vbus glitch
75bae0c78ef3 dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
20e5fb946959 dt-bindings: usb: mtu3: Add MT8195 MTU3 ip-sleep support
0145e6824861 dt-bindings: usb: Clean-up "usb-phy" constraints
eb9bdcaff280 dt-bindings: usb: add common Type-C USB Switch schema
a67690a90fb9 dt-bindings: usb: Add Marvell ac5
59434babb8e4 arm64: dts: qcom: sm8450: Add missing interconnects to serial
6b60607aa5cc dt-bindings: usb: Introduce ITE IT5205 Alt. Mode Passive MUX
fe0ce9c54778 dt-bindings: pinctrl: amlogic: narrow regex for unit address to hex numbers
8c58779baca1 dt-bindings: qcom: Document new msm8916-samsung devices
1438aadecf94 arm64: dts: qcom: sm8450-hdk: correct AMIC4 and AMIC5 microphones
b4d502118ad4 arm64: dts: qcom: sm8150: add necessary ref clock to PCIe
018a13d36a57 arm64: dts: qcom: sdm630: Hook up GPU cooling device
2b51fa0934c8 arm64: dts: qcom: sm8550: Hook up GPU cooling device
15018cdc0470 arm64: dts: qcom: sm8450: Hook up GPU cooling device
f5906fc26422 arm64: dts: qcom: sm8350: Hook up GPU cooling device
9df3c73a8511 arm64: dts: qcom: sm8250: Hook up GPU cooling device
257e0300ca3a arm64: dts: qcom: sm8150: Hook up GPU cooling device
b16301e27866 arm64: dts: qcom: sm6115: Mark GPU @ 125C critical
ccc769ffd9fa arm64: dts: qcom: sm6115: Hook up GPU cooling device
cf4e80b514f2 arm64: dts: qcom: sdm845: Hook up GPU cooling device
6ddaa894ac00 arm64: dts: qcom: sc8180x: Hook up GPU cooling device
1a13cc6e08c9 arm64: dts: qcom: msm8939: Hook up GPU cooling device
04962e8ee80d arm64: dts: qcom: msm8916: Hook up GPU cooling device
de58665d5a86 arm64: dts: qcom: x1e80100: Flush RSC sleep & wake votes
5792135ff692 arm64: dts: qcom: x1e80100: Add missing system-wide PSCI power domain
7dddf3cf2c2d dt-bindings: soc/qcom: Add size constraints on "qcom,rpm-msg-ram"
f3e26b603762 arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332
d2eb087d6a3f arm64: dts: qcom: Fix hs_phy_irq for SDM670/SDM845/SM6350
e912f5a885bc arm64: dts: qcom: Fix hs_phy_irq for non-QUSB2 targets
cc58f6b02229 arm64: dts: qcom: Fix hs_phy_irq for QUSB2 targets
ed2747597b2e arm64: dts: qcom: sm8550: add support for the SM8550-HDK board
0beb12a79761 dt-bindings: arm: qcom: Document the HDK8550 board
1182dc50de01 dt-bindings: net: Document QCA808x PHYs
8869fe2b8c59 dt-bindings: net: phy: Document LED inactive high impedance mode
8a5d470f446f dt-bindings: net: phy: Make LED active-low property common
ee170c770dce ASoC: dt-bindings: audio-graph-port: Drop type from "clocks"
52dc7498eed1 ASoC: dt-bindings: samsung,tm2: Correct "audio-codec" constraints
2294f77ec0a5 ARM: dts: sti: minor whitespace cleanup around '='
e8f034522bd8 arm64: dts: exynos: gs101: sysreg_peric0 needs a clock
d7849025c947 ARM: dts: da850: add MMD SDIO interrupts
f831c925b07a ARM: dts: marvell: dove-cubox: fix si5351 node names
70e16db126d5 arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
29fba2976ec3 dt-bindings: crypto: ice: Document SC7180 inline crypto engine
3d331a17e8c9 dt-bindings: qcom-qce: Add compatible for SM6350
4fd1499f0d02 arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU
459e64009a83 ARM: dts: DRA7xx: Add device tree entry for SGX GPU
33828a263695 ARM: dts: AM437x: Add device tree entry for SGX GPU
b812a94b3a14 ARM: dts: AM33xx: Add device tree entry for SGX GPU
a43b7f4412c3 ARM: dts: omap5: Add device tree entry for SGX GPU
26a571cb3312 ARM: dts: omap4: Add device tree entry for SGX GPU
0590991057c3 ARM: dts: omap3: Add device tree entry for SGX GPU
6cfc912186fd dt-bindings: gpu: Add PowerVR Series5 SGX GPUs
ecd5e84cb911 dt-bindings: gpu: Rename img,powervr to img,powervr-rogue
674fba836cdb arm64: dts: rockchip: fix nanopc-t6 sdmmc regulator
33b030710624 arm64: dts: rockchip: remove duplicate SPI aliases for helios64
7c0fd87b35a8 arm64: dts: rockchip: add spi controller aliases on rk3399
774db835de8a arm64: dts: rockchip: Add support for NanoPi R6C
245ed9f66edb arm64: dts: rockchip: Add support for NanoPi R6S
7ed25d8d0d24 dt-bindings: arm: rockchip: Add NanoPi R6 series boards
4fc6e0686faf arm64: dts: rockchip: Increase maximum frequency of SPI flash for ROCK Pi 4A/B/C
47aafd8512e1 arm64: dts: rockchip: add sdmmc card detect to the nanopc-t6
5bdf0ecf003d arm64: dts: rockchip: Add cache information to the SoC dtsi for RK3399
3d67b6c2a2af ARM: dts: rockchip: Enable HDMI output for XPI-3128
8ac6f9cf696a ARM: dts: rockchip: Add HDMI node for RK3128
06cbcacf56ad ARM: dts: rockchip: Add display subsystem for RK3128
9a9dc5b9e06a arm64: dts: rockchip: add rfkill node for M.2 Key E WiFi on rock-5b
c7f1c6bb420a arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power
9604142e6a0d arm64: dts: rockchip: Add LED_GREEN for edgeble-neu6a
cbd461ded362 arm64: dts: rockchip: Add Edgeble NCM6A-IO USB2
051aa218e679 arm64: dts: rockchip: Add Edgeble NCM6A-IO M.2 B-Key, E-Key
e24b6c90f78b arm64: dts: rockchip: Add Edgeble NCM6A-IO M.2 M-Key
c04566174738 arm64: dts: rockchip: Add Edgeble NCM6A-IO 2.5G ETH
1696541973b9 arm64: dts: rockchip: Add vdd_cpu_big reg to rk3588-edgeble-ncm6
fed4b47f48ac arm64: dts: rockchip: Add Edgeble NCM6A WiFi6 Overlay
648060033a16 arm64: dts: rockchip: Add common DT for edgeble-neu6b-io
14b26b2835cb arm64: dts: rockchip: Add edgeble-neu6a-common DT
8360c7a53f95 arm64: dts: rockchip: Drop edgeble-neu6b dcdc-reg4 regulator-init-microvolt
e497dc0158dd arm64: dts: rockchip: add missing definition of pmu io domains 1 and 2 on ringneck
f1cb710d9302 arm64: dts: rockchip: add Anbernic RG-ARC S and RG-ARC D
351c26e7934f dt-bindings: arm: rockchip: Add Anbernic RG-Arc
294dd835c5d0 arm64: dts: rockchip: Move device specific properties
e8f6b6072ce6 dt-bindings: soc: rockchip: Add rk3588 hdptxphy syscon
663d347eb7a7 ARM: dts: stm32: fix DSI peripheral clock on stm32mp15 boards
6e307e6bd72d dt-bindings: memory-controllers: narrow regex for unit address to hex numbers
ef93727c9def spi: dt-bindings: samsung: Add Exynos850 SPI
c714a4c1273b ARM: dts: qcom: use defines for interrupts
7f37d45ff70d ARM: dts: qcom: apq8026-samsung-matissewifi: Configure touch keys
cf76727f86a3 ARM: dts: stm32: lxa-tac: drive powerboard lines as open-drain
19fee3189355 dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHYs
899bb26cef2c dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
09065a127e3c dt-bindings: input: melfas,mms114: add MMS252 compatible
ef76ae751c3c dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support SDM660
97fd9e67ede2 dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: add TCSR registers
25bfbe442a13 dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
6ec985dff442 dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: split from sc8280xp PHY schema
8b41b5f06d8a arm64: dts: exynos: gs101: enable eeprom on gs101-oriole
eb43c96a2716 arm64: dts: exynos: gs101: define USI8 with I2C configuration
688d19a4c1d5 arm64: dts: exynos: gs101: update USI UART to use peric0 clocks
c8631c01c9d5 arm64: dts: exynos: gs101: enable cmu-peric0 clock controller
7f078f4efe48 arm64: dts: exynos: gs101: remove reg-io-width from serial
dfa299ac5670 arm64: dts: exynos: gs101: define Multi Core Timer (MCT) node
dd8d6cdb498f dt-bindings: clock: tesla,fsd: Fix spelling mistake
2a50cd8b4cad Merge tag 'samsung-dt-bindings-clk-6.9-2' into next/clk
1308a1709db2 dt-bindings: clock: exynos850: Add PDMA clocks
5f252cf1954d dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit
b7045107b13d dt-bindings: phy: Add QMP UFS PHY compatible for SC7180
806828c18886 arm64: dts: qcom: sc8180x: Add RPMh sleep stats
8bfa57f18d67 arm64: dts: qcom: sc8180x: Shrink aoss_qmp register space size
39124f597a6a arm64: dts: qcom: sc8180x: Add missing CPU<->MDP_CFG path
076044c5542f arm64: dts: qcom: sc8180x: Require LOW_SVS vote for MMCX if DISPCC is on
76f855a9dca6 arm64: dts: qcom: sc8180x: Don't hold MDP core clock at FMAX
37f3285d146b arm64: dts: qcom: sc8180x: Fix eDP PHY power-domains
5e5b25b16167 arm64: dts: qcom: sc8180x: Add missing CPU off state
a971a001fe6a arm64: dts: qcom: sc8180x: Fix up big CPU idle state entry latency
d43c023044f1 arm64: dts: qcom: sc8180x: Hook up VDD_CX as GCC parent domain
0a90e0fc5c4b dt-bindings: clock: gcc-sc8180x: Add the missing CX power domain
7d930fbfa6d1 riscv: dts: starfive: jh7110: Add PWM node and pins configuration
98729d5d619d riscv: dts: starfive: jh7100: Add PWM node and pins configuration
2613a64bdc5e dt-bindings: spi: nxp-fspi: support i.MX93 and i.MX95
36d4b81404af dt-bindings: spi: fsl-lpspi: support i.MX95 LPSPI
3ff4d525b9f7 ASoC: dt-bindings: fsl-sai: Support Rx-only SAI
fc98068e41fe ASoC: dt-bindings: fsl-sai: Add power-domains
7e4487f7e723 ASoC: Support SAI and MICFIL on i.MX95 platform
170639843215 dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add spi bus
e06b0404e4ef dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml add pressure-triplet
cb500c9133ee dt-bindings: iio: pressure: honeywell,mprls0025pa.yaml improvements
0c9fbdab661d dt-bindings: iio: light: as73211: add support for as7331
668faa4c00b6 ARM: dts: qcom: ipq4019: correct clock order in DWC3 node
01f571222843 ARM: dts: qcom: sdx65: correct clock order in DWC3 node
f0606dbf1b06 ARM: dts: qcom: ipq8064: drop unused reset-names from DWC3 node
638f430aa2c5 arm64: dts: qcom: qcm6490-fairphone-fp5: Enable venus node
2bf14ff2de89 arm64: dts: qcom: sc7280: Move video-firmware to chrome-common
e694053a2504 arm64: dts: qcom: x1e80100: drop qcom,drv-count
ae0bc4781d25 arm64: dts: qcom: sc7280: Add additional MSI interrupts
fbc40e8570be dt-bindings: pwm: Add bindings for OpenCores PWM Controller
f86a5abc5095 ASoC: codecs: add support for WCD939x Codec
0023860e3cd8 dt-bindings: Add DPS310 as trivial device
4d5cba356b2e docs: dt: submitting-patches: add commit subject prefix in reversed format
86c6d04414f3 docs: dt: submitting-patches: drop outdated points to TXT format
20fea215870b dt-bindings: Turn on undocumented compatible checks
c15bd0d0ea0d arm64: zynqmp: Align usb clock nodes with binding
506404184883 arm64: zynqmp: Comment all smmu entries
702fb0df1a8d arm64: zynqmp: Rename i2c?-gpio to i2c?-gpio-grp
8dae08d3ef0c arm64: zynqmp: Disable Tri-state for MIO38 Pin
08cee7c9acca arm64: zynqmp: Remove incorrect comment from kv260s
c28bc39bcbe4 arm64: zynqmp: Introduce u-boot options node with bootscr-address
346b5266ae26 arm64: zynqmp: Fix comment to be aligned with board name.
69a088e616d5 arm64: zynqmp: Update ECAM size to discover up to 256 buses
c78a834d7d85 arm64: zynqmp: Describe assigned-clocks for uarts
aab3209386cd arm64: zynqmp: Setup default si570 frequency to 156.25MHz
70d8c607c90e arm64: zynqmp: Add resets property for CAN nodes
1e662bbad32e arm64: zynqmp: Add an OP-TEE node to the device tree
b97de3d1f0f1 arm64: zynqmp: Add output-enable pins to SOMs
5149181eb2a0 arm64: zynqmp: Rename zynqmp-power node to power-management
4bbdddd5f137 dt-bindings: firmware: xilinx: Sort node names (clock-controller)
bbe26a5d3a74 dt-bindings: firmware: xilinx: Describe missing child nodes
3bb58ba1f178 dt-bindings: firmware: xilinx: Fix versal-fpga node name
552578beff16 dt-bindings: firmware: versal: add versal-net compatible string
a1e42c2d1feb dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
793923947260 dt-bindings: i2c: exynos5: add google,gs101-hsi2c compatible
e40d0f28e904 ARM: dts: samsung: exynos4412-p4note: add accelerometer and gyro to p4note
b0f7ebf9ebb5 ARM: dts: samsung: exynos5800-peach: Enable cros-ec-spi as wake source
7fb70f62fdc1 ARM: dts: samsung: exynos5420-peach: Enable cros-ec-spi as wake source
69ffe89c1f09 ARM: dts: samsung: exynos5422-odroidxu3: disable thermal polling
efc6740c2555 arm64: dts: renesas: r8a779g0: Restore sort order
4d29837048f1 ARM: dts: renesas: r8a73a4: Fix thermal parent clock
b3b5e2c31a6a ARM: dts: renesas: r8a73a4: Add cp clock
0355cc519d58 ARM: dts: renesas: r8a73a4: Fix external clocks and clock rate
c7faddebe0f9 arm64: dts: renesas: rzg3s-smarc: Add gpio keys
cf58f575cc98 dt-bindings: regulator: Convert ti,tps65132 to YAML
fc588d5d53ae ASoC: dt-bindings: Do not override firmware-name $ref
81002cf24ea5 ASoC: dt-bindings: document WCD939x Audio Codec
f47aa77e7a94 ASoC: dt-bindings: qcom,wcd938x: move out common properties
d7f07526a034 ASoC: dt-bindings: fsl,micfil: Add compatible string for i.MX95 platform
e4fa9d184d78 ASoC: dt-bindings: fsl,sai: Add compatible string for i.MX95 platform
6d65dad20b03 dt-bindings: input: touchscreen: goodix: clarify irq-gpios misleading text
1f08757666ca dt-bindings: input: silead,gsl1680: do not override firmware-name $ref
ffc68c88254b dt-bindings: display: panel: Add Novatek NT36672E LCD DSI
22dafcaa7945 dt-bindings: display: panel: Add BOE TH101MB31IG002-28A panel
29e394c3abcd dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
c378224488e5 dt-bindings: display: Add SSD133x OLED controllers
d4d009fba537 dt-bindings: display: ssd132x: Add vendor prefix to width and height
b74c86bcffbc dt-bindings: display: ssd1307fb: Add vendor prefix to width and height
140b66753a95 dt-bindings: panel: lvds: Append edt,etml0700z9ndha in panel-lvds

git-subtree-dir: dts/upstream
git-subtree-split: 7e08733c96c84eb323f47e9b248c924e2ac6272a
---

diff --git a/Bindings/Makefile b/Bindings/Makefile
index 129cf698fa..5e08e3a6a9 100644
--- a/Bindings/Makefile
+++ b/Bindings/Makefile
@@ -64,9 +64,6 @@ override DTC_FLAGS := \
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 
-# Disable undocumented compatible checks until warning free
-override DT_CHECKER_FLAGS ?=
-
 $(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
 	$(call if_changed_rule,chkdt)
 
diff --git a/Bindings/arm/amlogic.yaml b/Bindings/arm/amlogic.yaml
index caab7ceeda..949537cea6 100644
--- a/Bindings/arm/amlogic.yaml
+++ b/Bindings/arm/amlogic.yaml
@@ -7,19 +7,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Amlogic SoC based Platforms
 
 maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+  - Jerome Brunet <jbrunet@baylibre.com>
   - Kevin Hilman <khilman@baylibre.com>
 
-description: |+
-  Work in progress statement:
-
-  Device tree files and bindings applying to Amlogic SoCs and boards are
-  considered "unstable". Any Amlogic device tree binding may change at
-  any time. Be sure to use a device tree binary and a kernel image
-  generated from the same source tree.
-
-  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-  stable binding/ABI.
-
 properties:
   $nodename:
     const: '/'
@@ -146,6 +138,7 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - freebox,fbx8am
               - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
diff --git a/Bindings/arm/arm,realview.yaml b/Bindings/arm/arm,realview.yaml
index d1bdee98f9..3c5f1688db 100644
--- a/Bindings/arm/arm,realview.yaml
+++ b/Bindings/arm/arm,realview.yaml
@@ -10,9 +10,9 @@ maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 description: |+
-  The ARM RealView series of reference designs were built to explore the ARM
-  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
-  the earlier CPUs such as TrustZone and multicore (MPCore).
+  The ARM RealView series of reference designs were built to explore the Arm11,
+  Cortex-A8, and Cortex-A9 CPUs. This included new features compared to the
+  earlier CPUs such as TrustZone and multicore (MPCore).
 
 properties:
   $nodename:
diff --git a/Bindings/arm/atmel-at91.yaml b/Bindings/arm/atmel-at91.yaml
index 89d75fbb1d..82f37328cc 100644
--- a/Bindings/arm/atmel-at91.yaml
+++ b/Bindings/arm/atmel-at91.yaml
@@ -179,6 +179,12 @@ properties:
           - const: microchip,sama7g5
           - const: microchip,sama7
 
+      - description: Microchip SAMA7G54 Curiosity Board
+        items:
+          - const: microchip,sama7g54-curiosity
+          - const: microchip,sama7g5
+          - const: microchip,sama7
+
       - description: Microchip LAN9662 Evaluation Boards.
         items:
           - enum:
diff --git a/Bindings/arm/fsl.yaml b/Bindings/arm/fsl.yaml
index 228dcc5c7d..0027201e19 100644
--- a/Bindings/arm/fsl.yaml
+++ b/Bindings/arm/fsl.yaml
@@ -384,7 +384,8 @@ properties:
               - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
               - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
               - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
-              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.0/v1.1
+              - toradex,apalis_imx6q-eval-v1.2  # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
 
@@ -469,6 +470,7 @@ properties:
               - prt,prtvt7                # Protonic VT7 board
               - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
               - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - sielaff,imx6dl-board      # Sielaff i.MX6 Solo Board
               - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
               - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
               - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
@@ -708,6 +710,7 @@ properties:
               - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
               - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
               - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
+              - uni-t,uti260b             # UNI-T UTi260B Thermal Camera
           - const: fsl,imx6ull
 
       - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -1026,7 +1029,7 @@ properties:
         items:
           - enum:
               - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
-              - rve,rve-gateway # i.MX8MN RVE Gateway Board
+              - rve,gateway # i.MX8MN RVE Gateway Board
               - variscite,var-som-mx8mn-symphony
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
@@ -1194,7 +1197,8 @@ properties:
       - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
         items:
           - enum:
-              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation Board
+              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
+              - toradex,apalis-imx8-eval-v1.2       # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
               - toradex,apalis-imx8-ixora-v1.1      # Apalis iMX8 Module on Ixora V1.1 Carrier Board
           - const: toradex,apalis-imx8
           - const: fsl,imx8qm
@@ -1202,7 +1206,8 @@ properties:
       - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
         items:
           - enum:
-              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
+              - toradex,apalis-imx8-v1.1-eval-v1.2  # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
               - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
               - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
           - const: toradex,apalis-imx8-v1.1
@@ -1232,6 +1237,22 @@ properties:
           - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
+      - description:
+          TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip
+          variants. It is designed to be clicked on different carrier boards
+          MBa8Xx is the starterkit
+        oneOf:
+          - items:
+              - enum:
+                  - tq,imx8dxp-tqma8xdp-mba8xx # TQ-Systems GmbH TQMa8XDP SOM on MBa8Xx
+              - const: tq,imx8dxp-tqma8xdp     # TQ-Systems GmbH TQMa8XDP SOM (with i.MX8DXP)
+              - const: fsl,imx8dxp
+          - items:
+              - enum:
+                  - tq,imx8qxp-tqma8xqp-mba8xx # TQ-Systems GmbH TQMa8XQP SOM on MBa8Xx
+              - const: tq,imx8qxp-tqma8xqp     # TQ-Systems GmbH TQMa8XQP SOM (with i.MX8QXP)
+              - const: fsl,imx8qxp
+
       - description: i.MX8ULP based Boards
         items:
           - enum:
@@ -1275,6 +1296,18 @@ properties:
           - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
           - const: fsl,imx93
 
+      - description: PHYTEC phyCORE-i.MX93 SoM based boards
+        items:
+          - const: phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93
+          - const: phytec,imx93-phycore-som    # phyCORE-i.MX93 SoM
+          - const: fsl,imx93
+
+      - description: Variscite VAR-SOM-MX93 based boards
+        items:
+          - const: variscite,var-som-mx93-symphony
+          - const: variscite,var-som-mx93
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
diff --git a/Bindings/arm/marvell/armada-38x.txt b/Bindings/arm/marvell/armada-38x.txt
deleted file mode 100644
index 202953f188..0000000000
--- a/Bindings/arm/marvell/armada-38x.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell Armada 38x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 38x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada380"
-
-In addition, boards using the Marvell Armada 385 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada385"
-
-In addition, boards using the Marvell Armada 388 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada388"
-
-Example:
-
-compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Bindings/arm/marvell/armada-38x.yaml b/Bindings/arm/marvell/armada-38x.yaml
new file mode 100644
index 0000000000..cdf805b5db
--- /dev/null
+++ b/Bindings/arm/marvell/armada-38x.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-38x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 38x Platforms
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description:
+          Netgear Armada 380 GS110EM Managed Switch.
+        items:
+          - const: netgear,gs110emx
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 385 Development Boards.
+        items:
+          - enum:
+              - marvell,a385-db-amc
+              - marvell,a385-db-ap
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 385 based single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-gtr-l8
+              - solidrun,clearfog-gtr-s4
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Kobol Armada 388 based Helios-4 NAS.
+        items:
+          - const: kobol,helios4
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 388 Development Boards.
+        items:
+          - enum:
+              - marvell,a388-gp
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 388 clearfog family single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-base-a1
+              - solidrun,clearfog-pro-a1
+          - const: solidrun,clearfog-a1
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+additionalProperties: true
diff --git a/Bindings/arm/mediatek.yaml b/Bindings/arm/mediatek.yaml
index 6f2f64ae76..09f9ffd3ff 100644
--- a/Bindings/arm/mediatek.yaml
+++ b/Bindings/arm/mediatek.yaml
@@ -17,6 +17,7 @@ properties:
     const: '/'
   compatible:
     oneOf:
+      # Sort by SoC (last) compatible, then board compatible
       - items:
           - enum:
               - mediatek,mt2701-evb
@@ -84,6 +85,11 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - xiaomi,ax3000t
+          - const: mediatek,mt7981b
+      - items:
+          - enum:
+              - acelink,ew-7886cax
               - bananapi,bpi-r3
               - mediatek,mt7986a-rfb
           - const: mediatek,mt7986a
@@ -91,6 +97,10 @@ properties:
           - enum:
               - mediatek,mt7986b-rfb
           - const: mediatek,mt7986b
+      - items:
+          - enum:
+              - bananapi,bpi-r4
+          - const: mediatek,mt7988a
       - items:
           - enum:
               - mediatek,mt8127-moose
@@ -129,75 +139,10 @@ properties:
           - enum:
               - mediatek,mt8173-evb
           - const: mediatek,mt8173
-      - items:
-          - enum:
-              - mediatek,mt8183-evb
-          - const: mediatek,mt8183
-      - description: Google Hayato rev5
-        items:
-          - const: google,hayato-rev5-sku2
-          - const: google,hayato-sku2
-          - const: google,hayato
-          - const: mediatek,mt8192
-      - description: Google Hayato
-        items:
-          - const: google,hayato-rev1
-          - const: google,hayato
-          - const: mediatek,mt8192
-      - description: Google Spherion rev4 (Acer Chromebook 514)
-        items:
-          - const: google,spherion-rev4
-          - const: google,spherion
-          - const: mediatek,mt8192
-      - description: Google Spherion (Acer Chromebook 514)
-        items:
-          - const: google,spherion-rev3
-          - const: google,spherion-rev2
-          - const: google,spherion-rev1
-          - const: google,spherion-rev0
-          - const: google,spherion
-          - const: mediatek,mt8192
-      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
-        items:
-          - enum:
-              - google,tomato-rev2
-              - google,tomato-rev1
-          - const: google,tomato
-          - const: mediatek,mt8195
-      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
-        items:
-          - const: google,tomato-rev4
-          - const: google,tomato-rev3
-          - const: google,tomato
-          - const: mediatek,mt8195
-      - items:
-          - enum:
-              - mediatek,mt8186-evb
-          - const: mediatek,mt8186
-      - items:
-          - enum:
-              - mediatek,mt8188-evb
-          - const: mediatek,mt8188
-      - items:
-          - enum:
-              - mediatek,mt8192-evb
-          - const: mediatek,mt8192
-      - items:
-          - enum:
-              - mediatek,mt8195-demo
-              - mediatek,mt8195-evb
-          - const: mediatek,mt8195
       - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
         items:
           - const: google,burnet
           - const: mediatek,mt8183
-      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
-        items:
-          - enum:
-              - google,krane-sku0
-              - google,krane-sku176
-          - const: google,krane
-          - const: mediatek,mt8183
       - description: Google Cozmo (Acer Chromebook 314)
         items:
           - const: google,cozmo
@@ -255,6 +200,13 @@ properties:
               - google,kodama-sku32
           - const: google,kodama
           - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - enum:
+              - google,krane-sku0
+              - google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
       - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
         items:
           - enum:
@@ -276,10 +228,125 @@ properties:
               - google,willow-sku1
           - const: google,willow
           - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8183-evb
+          - const: mediatek,mt8183
       - items:
           - enum:
               - mediatek,mt8183-pumpkin
           - const: mediatek,mt8183
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393219
+          - const: google,steelix-sku393216
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393220
+          - const: google,steelix-sku393217
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393221
+          - const: google,steelix-sku393218
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Rusty (Lenovo 100e Chromebook Gen 4)
+        items:
+          - const: google,steelix-sku196609
+          - const: google,steelix-sku196608
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
+        items:
+          - enum:
+              - google,steelix-sku131072
+              - google,steelix-sku131073
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262147
+          - const: google,tentacruel-sku262146
+          - const: google,tentacruel-sku262145
+          - const: google,tentacruel-sku262144
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262151
+          - const: google,tentacruel-sku262150
+          - const: google,tentacruel-sku262149
+          - const: google,tentacruel-sku262148
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327681
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327683
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8188-evb
+          - const: mediatek,mt8188
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Hayato rev5
+        items:
+          - const: google,hayato-rev5-sku2
+          - const: google,hayato-sku2
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Google Spherion rev4 (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev4
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
       - items:
           - enum:
               - mediatek,mt8365-evk
@@ -287,6 +354,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8395-evk
+              - radxa,nio-12l
           - const: mediatek,mt8395
           - const: mediatek,mt8195
       - items:
diff --git a/Bindings/arm/mediatek/mediatek,hifsys.txt b/Bindings/arm/mediatek/mediatek,hifsys.txt
deleted file mode 100644
index 323905af82..0000000000
--- a/Bindings/arm/mediatek/mediatek,hifsys.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Mediatek hifsys controller
-============================
-
-The Mediatek hifsys controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-hifsys", "syscon"
-	- "mediatek,mt7622-hifsys", "syscon"
-	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
-- #clock-cells: Must be 1
-
-The hifsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-hifsys: clock-controller@1a000000 {
-	compatible = "mediatek,mt2701-hifsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Bindings/arm/mediatek/mediatek,pciesys.txt b/Bindings/arm/mediatek/mediatek,pciesys.txt
deleted file mode 100644
index d179a61536..0000000000
--- a/Bindings/arm/mediatek/mediatek,pciesys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek PCIESYS controller
-============================
-
-The MediaTek PCIESYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-pciesys", "syscon"
-	- "mediatek,mt7629-pciesys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The PCIESYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-pciesys: pciesys@1a100800 {
-	compatible = "mediatek,mt7622-pciesys", "syscon";
-	reg = <0 0x1a100800 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Bindings/arm/mediatek/mediatek,ssusbsys.txt b/Bindings/arm/mediatek/mediatek,ssusbsys.txt
deleted file mode 100644
index 7cb02c9306..0000000000
--- a/Bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek SSUSBSYS controller
-============================
-
-The MediaTek SSUSBSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-ssusbsys", "syscon"
-	- "mediatek,mt7629-ssusbsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The SSUSBSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ssusbsys: ssusbsys@1a000000 {
-	compatible = "mediatek,mt7622-ssusbsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Bindings/arm/msm/qcom,saw2.txt b/Bindings/arm/msm/qcom,saw2.txt
deleted file mode 100644
index c0e3c3a42b..0000000000
--- a/Bindings/arm/msm/qcom,saw2.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SPM AVS Wrapper 2 (SAW2)
-
-The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
-Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
-power-controller that transitions a piece of hardware (like a processor or
-subsystem) into and out of low power modes via a direct connection to
-the PMIC. It can also be wired up to interact with other processors in the
-system, notifying them when a low power state is entered or exited.
-
-Multiple revisions of the SAW hardware are supported using these Device Nodes.
-SAW2 revisions differ in the register offset and configuration data. Also, the
-same revision of the SAW in different SoCs may have different configuration
-data due the differences in hardware capabilities. Hence the SoC name, the
-version of the SAW hardware in that SoC and the distinction between cpu (big
-or Little) or cache, may be needed to uniquely identify the SAW register
-configuration and initialization data. The compatible string is used to
-indicate this parameter.
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Must have
-			"qcom,saw2"
-		    A more specific value could be one of:
-			"qcom,apq8064-saw2-v1.1-cpu"
-			"qcom,msm8226-saw2-v2.1-cpu"
-			"qcom,msm8974-saw2-v2.1-cpu"
-			"qcom,apq8084-saw2-v2.1-cpu"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first element specifies the base address and size of
-		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
-
-- regulator:
-	Usage: optional
-	Value type: boolean
-	Definition: Indicates that this SPM device acts as a regulator device
-			device for the core (CPU or Cache) the SPM is attached
-			to.
-
-Example 1:
-
-	power-controller@2099000 {
-		compatible = "qcom,saw2";
-		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-		regulator;
-	};
-
-Example 2:
-	saw0: power-controller@f9089000 {
-		compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-		reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-	};
diff --git a/Bindings/arm/qcom,coresight-tpdm.yaml b/Bindings/arm/qcom,coresight-tpdm.yaml
index 61ddc3b5b2..8eec07d9d4 100644
--- a/Bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Bindings/arm/qcom,coresight-tpdm.yaml
@@ -44,14 +44,21 @@ properties:
     minItems: 1
     maxItems: 2
 
-  qcom,dsb-element-size:
+  qcom,dsb-element-bits:
     description:
       Specifies the DSB(Discrete Single Bit) element size supported by
       the monitor. The associated aggregator will read this size before it
       is enabled. DSB element size currently only supports 32-bit and 64-bit.
-    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [32, 64]
 
+  qcom,cmb-element-bits:
+    description:
+      Specifies the CMB(Continuous Multi-Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. CMB element size currently only supports 8-bit, 32-bit
+      and 64-bit.
+    enum: [8, 32, 64]
+
   qcom,dsb-msrs-num:
     description:
       Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
@@ -61,6 +68,15 @@ properties:
     minimum: 0
     maximum: 32
 
+  qcom,cmb-msrs-num:
+    description:
+      Specifies the number of CMB MSR(mux select register) registers supported
+      by the monitor. If this property is not configured or set to 0, it means
+      this TPDM doesn't support CMB MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -94,7 +110,7 @@ examples:
       compatible = "qcom,coresight-tpdm", "arm,primecell";
       reg = <0x0684c000 0x1000>;
 
-      qcom,dsb-element-size = /bits/ 8 <32>;
+      qcom,dsb-element-bits = <32>;
       qcom,dsb-msrs-num = <16>;
 
       clocks = <&aoss_qmp>;
@@ -110,4 +126,22 @@ examples:
       };
     };
 
+    tpdm@6c29000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x06c29000 0x1000>;
+
+      qcom,cmb-element-bits = <64>;
+      qcom,cmb-msrs-num = <32>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_ipcc_out_funnel_center: endpoint {
+            remote-endpoint = <&funnel_center_in_tpdm_ipcc>;
+          };
+        };
+      };
+    };
 ...
diff --git a/Bindings/arm/qcom.yaml b/Bindings/arm/qcom.yaml
index 1a5fb889a4..66beaac60e 100644
--- a/Bindings/arm/qcom.yaml
+++ b/Bindings/arm/qcom.yaml
@@ -10,17 +10,10 @@ maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Some qcom based bootloaders identify the dtb blob based on a set of
-  device properties like SoC and platform and revisions of those components.
-  To support this scheme, we encode this information into the board compatible
-  string.
-
-  Each board must specify a top-level board compatible string with the following
-  format:
-
-  	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
-
-  The 'SoC' and 'board' elements are required. All other elements are optional.
+  For devices using the Qualcomm SoC the "compatible" properties consists of
+  one or several "manufacturer,model" strings, describing the device itself,
+  followed by one or several "qcom,<SoC>" strings, describing the SoC used in
+  the device.
 
   The 'SoC' element must be one of the following strings:
 
@@ -90,43 +83,9 @@ description: |
         sm8650
         x1e80100
 
-  The 'board' element must be one of the following strings:
-
-        adp
-        cdp
-        dragonboard
-        idp
-        liquid
-        mtp
-        qcp
-        qrd
-        rb2
-        ride
-        sbc
-        x100
-
-  The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
-  where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
-  as v1. If all versions of the 'board_version' elements match, then a
-  wildcard '*' should be used, e.g. 'v*'.
-
-  The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
-
-  Examples:
-
-  	"qcom,msm8916-v1-cdp-pm8916-v2.1"
-
-  A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
-  2.1.
-
-  	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
-
-  A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
-  foundry 2.
-
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
-  OS. These devices do not use the scheme described above. For details, see:
+  OS. These devices use the bootflow explained at
   https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
@@ -187,6 +146,7 @@ properties:
               - microsoft,superman-lte
               - microsoft,tesla
               - motorola,peregrine
+              - samsung,matisselte
           - const: qcom,msm8926
           - const: qcom,msm8226
 
@@ -244,11 +204,15 @@ properties:
               - samsung,a5u-eur
               - samsung,e5
               - samsung,e7
+              - samsung,fortuna3g
+              - samsung,gprimeltecan
               - samsung,grandmax
+              - samsung,grandprimelte
               - samsung,gt510
               - samsung,gt58
               - samsung,j5
               - samsung,j5x
+              - samsung,rossa
               - samsung,serranove
               - thwc,uf896
               - thwc,ufi001c
@@ -988,6 +952,7 @@ properties:
 
       - items:
           - enum:
+              - xiaomi,curtana
               - xiaomi,joyeuse
           - const: qcom,sm7125
 
@@ -1035,6 +1000,7 @@ properties:
 
       - items:
           - enum:
+              - qcom,sm8550-hdk
               - qcom,sm8550-mtp
               - qcom,sm8550-qrd
           - const: qcom,sm8550
diff --git a/Bindings/arm/rockchip.yaml b/Bindings/arm/rockchip.yaml
index 5cf5cbef2c..fcf7316ecd 100644
--- a/Bindings/arm/rockchip.yaml
+++ b/Bindings/arm/rockchip.yaml
@@ -37,29 +37,16 @@ properties:
               - anbernic,rg351v
           - const: rockchip,rk3326
 
-      - description: Anbernic RG353P
+      - description: Anbernic RK3566 Handheld Gaming Console
         items:
-          - const: anbernic,rg353p
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353PS
-        items:
-          - const: anbernic,rg353ps
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353V
-        items:
-          - const: anbernic,rg353v
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353VS
-        items:
-          - const: anbernic,rg353vs
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG503
-        items:
-          - const: anbernic,rg503
+          - enum:
+              - anbernic,rg353p
+              - anbernic,rg353ps
+              - anbernic,rg353v
+              - anbernic,rg353vs
+              - anbernic,rg503
+              - anbernic,rg-arc-d
+              - anbernic,rg-arc-s
           - const: rockchip,rk3566
 
       - description: Asus Tinker board
@@ -237,6 +224,13 @@ properties:
               - friendlyarm,nanopi-r5s
           - const: rockchip,rk3568
 
+      - description: FriendlyElec NanoPi R6 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r6c
+              - friendlyarm,nanopi-r6s
+          - const: rockchip,rk3588s
+
       - description: FriendlyElec NanoPC T6
         items:
           - const: friendlyarm,nanopc-t6
@@ -626,9 +620,9 @@ properties:
           - const: openailab,eaidk-610
           - const: rockchip,rk3399
 
-      - description: Orange Pi RK3399 board
+      - description: Xunlong Orange Pi RK3399 board
         items:
-          - const: rockchip,rk3399-orangepi
+          - const: xunlong,rk3399-orangepi
           - const: rockchip,rk3399
 
       - description: Phytec phyCORE-RK3288 Rapid Development Kit
@@ -655,6 +649,14 @@ properties:
           - const: pine64,pinephone-pro
           - const: rockchip,rk3399
 
+      - description: Pine64 PineTab2
+        items:
+          - enum:
+              - pine64,pinetab2-v0.1
+              - pine64,pinetab2-v2.0
+          - const: pine64,pinetab2
+          - const: rockchip,rk3566
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -692,11 +694,17 @@ properties:
       - description: Powkiddy RK3566 Handheld Gaming Console
         items:
           - enum:
+              - powkiddy,rgb10max3
               - powkiddy,rgb30
               - powkiddy,rk2023
               - powkiddy,x55
           - const: rockchip,rk3566
 
+      - description: QNAP TS-433-4G 4-Bay NAS
+        items:
+          - const: qnap,ts433
+          - const: rockchip,rk3568
+
       - description: Radxa Compute Module 3(CM3)
         items:
           - enum:
@@ -878,6 +886,11 @@ properties:
           - const: rockchip,rv1108-evb
           - const: rockchip,rv1108
 
+      - description: Rockchip Toybrick TB-RK3588X board
+        items:
+          - const: rockchip,rk3588-toybrick-x0
+          - const: rockchip,rk3588
+
       - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
         items:
           - const: tsd,px30-ringneck-haikou
@@ -898,6 +911,12 @@ properties:
           - const: tsd,rk3588-jaguar
           - const: rockchip,rk3588
 
+      - description: Theobroma Systems RK3588-Q7 with Haikou baseboard
+        items:
+          - const: tsd,rk3588-tiger-haikou
+          - const: tsd,rk3588-tiger
+          - const: rockchip,rk3588
+
       - description: Tronsmart Orion R68 Meta
         items:
           - const: tronsmart,orion-r68-meta
@@ -940,9 +959,9 @@ properties:
           - const: rockchip,rk3568-evb1-v10
           - const: rockchip,rk3568
 
-      - description: Rockchip RK3568 Banana Pi R2 Pro
+      - description: Sinovoip RK3568 Banana Pi R2 Pro
         items:
-          - const: rockchip,rk3568-bpi-r2pro
+          - const: sinovoip,rk3568-bpi-r2pro
           - const: rockchip,rk3568
 
       - description: Sonoff iHost Smart Home Hub
diff --git a/Bindings/arm/sunxi.yaml b/Bindings/arm/sunxi.yaml
index a9d8e85565..09d835db6d 100644
--- a/Bindings/arm/sunxi.yaml
+++ b/Bindings/arm/sunxi.yaml
@@ -815,6 +815,12 @@ properties:
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: Remix Mini PC
+        items:
+          - const: jide,remix-mini-pc
+          - const: allwinner,sun50i-h64
+          - const: allwinner,sun50i-a64
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk
@@ -835,6 +841,12 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: Sipeed Longan Pi 3H board for the Sipeed Longan Module 3H
+        items:
+          - const: sipeed,longan-pi-3h
+          - const: sipeed,longan-module-3h
+          - const: allwinner,sun50i-h618
+
       - description: SourceParts PopStick v1.1
         items:
           - const: sourceparts,popstick-v1.1
diff --git a/Bindings/arm/syna.txt b/Bindings/arm/syna.txt
index 851f48ead9..f53c430f64 100644
--- a/Bindings/arm/syna.txt
+++ b/Bindings/arm/syna.txt
@@ -6,18 +6,6 @@ berlin SoCs are now Synaptics' SoCs now.
 
 ---------------------------------------------------------------
 
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Bindings/arm/tegra.yaml b/Bindings/arm/tegra.yaml
index fcf9564061..8fb4923517 100644
--- a/Bindings/arm/tegra.yaml
+++ b/Bindings/arm/tegra.yaml
@@ -64,6 +64,14 @@ properties:
       - items:
           - const: asus,tf700t
           - const: nvidia,tegra30
+      - description: LG Optimus 4X P880
+        items:
+          - const: lg,p880
+          - const: nvidia,tegra30
+      - description: LG Optimus Vu P895
+        items:
+          - const: lg,p895
+          - const: nvidia,tegra30
       - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
diff --git a/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
index 0faa403f68..ea4fbf6552 100644
--- a/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
+++ b/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -27,7 +27,7 @@ properties:
       - const: pmc
       - const: wake
       - const: aotag
-      - const: scratch
+      - enum: [ scratch, misc ]
       - const: misc
 
   interrupt-controller: true
@@ -41,25 +41,43 @@ properties:
     description: If present, inverts the PMU interrupt signal.
     $ref: /schemas/types.yaml#/definitions/flag
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: nvidia,tegra186-pmc
-then:
-  properties:
-    reg:
-      maxItems: 4
-
-    reg-names:
-      maxItems: 4
-else:
-  properties:
-    reg:
-      minItems: 5
-
-    reg-names:
-      minItems: 5
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-pmc
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+          contains:
+            const: scratch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra194-pmc
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-pmc
+    then:
+      properties:
+        reg-names:
+          contains:
+            const: misc
 
 patternProperties:
   "^[a-z0-9]+-[a-z0-9]+$":
diff --git a/Bindings/arm/ti/k3.yaml b/Bindings/arm/ti/k3.yaml
index c6506bccfe..52b51fd704 100644
--- a/Bindings/arm/ti/k3.yaml
+++ b/Bindings/arm/ti/k3.yaml
@@ -87,12 +87,20 @@ properties:
           - const: tq,am642-tqma6442l
           - const: ti,am642
 
+      - description: K3 AM642 SoC SolidRun SoM based boards
+        items:
+          - enum:
+              - solidrun,am642-hummingboard-t
+          - const: solidrun,am642-sr-som
+          - const: ti,am642
+
       - description: K3 AM654 SoC
         items:
           - enum:
               - siemens,iot2050-advanced
               - siemens,iot2050-advanced-m2
               - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-advanced-sm
               - siemens,iot2050-basic
               - siemens,iot2050-basic-pg2
               - ti,am654-evm
@@ -123,6 +131,12 @@ properties:
               - ti,j721s2-evm
           - const: ti,j721s2
 
+      - description: K3 J722S SoC and Boards
+        items:
+          - enum:
+              - ti,j722s-evm
+          - const: ti,j722s
+
       - description: K3 J784s4 SoC
         items:
           - enum:
diff --git a/Bindings/ata/ahci-mtk.txt b/Bindings/ata/ahci-mtk.txt
deleted file mode 100644
index d2aa696b16..0000000000
--- a/Bindings/ata/ahci-mtk.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-MediaTek Serial ATA controller
-
-Required properties:
- - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
-		     When using "mediatek,mtk-ahci" compatible strings, you
-		     need SoC specific ones in addition, one of:
-		     - "mediatek,mt7622-ahci"
- - reg		   : Physical base addresses and length of register sets.
- - interrupts	   : Interrupt associated with the SATA device.
- - interrupt-names : Associated name must be: "hostc".
- - clocks	   : A list of phandle and clock specifier pairs, one for each
-		     entry in clock-names.
- - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
- - phys		   : A phandle and PHY specifier pair for the PHY port.
- - phy-names	   : Associated name must be: "sata-phy".
- - ports-implemented : See ./ahci-platform.txt for details.
-
-Optional properties:
- - power-domains   : A phandle and power domain specifier pair to the power
-		     domain which is responsible for collapsing and restoring
-		     power to the peripheral.
- - resets	   : Must contain an entry for each entry in reset-names.
-		     See ../reset/reset.txt for details.
- - reset-names	   : Associated names must be: "axi", "sw", "reg".
- - mediatek,phy-mode : A phandle to the system controller, used to enable
-		       SATA function.
-
-Example:
-
-	sata: sata@1a200000 {
-		compatible = "mediatek,mt7622-ahci",
-			     "mediatek,mtk-ahci";
-		reg = <0 0x1a200000 0 0x1100>;
-		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hostc";
-		clocks = <&pciesys CLK_SATA_AHB_EN>,
-			 <&pciesys CLK_SATA_AXI_EN>,
-			 <&pciesys CLK_SATA_ASIC_EN>,
-			 <&pciesys CLK_SATA_RBC_EN>,
-			 <&pciesys CLK_SATA_PM_EN>;
-		clock-names = "ahb", "axi", "asic", "rbc", "pm";
-		phys = <&u3port1 PHY_TYPE_SATA>;
-		phy-names = "sata-phy";
-		ports-implemented = <0x1>;
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
-			 <&pciesys MT7622_SATA_PHY_SW_RST>,
-			 <&pciesys MT7622_SATA_PHY_REG_RST>;
-		reset-names = "axi", "sw", "reg";
-		mediatek,phy-mode = <&pciesys>;
-	};
diff --git a/Bindings/ata/atmel-at91_cf.txt b/Bindings/ata/atmel-at91_cf.txt
deleted file mode 100644
index c1d22b3ae1..0000000000
--- a/Bindings/ata/atmel-at91_cf.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Atmel AT91RM9200 CompactFlash
-
-Required properties:
-- compatible : "atmel,at91rm9200-cf".
-- reg : should specify localbus address and size used.
-- gpios : specifies the gpio pins to control the CF device. Detect
-  and reset gpio's are mandatory while irq and vcc gpio's are
-  optional and may be set to 0 if not present.
-
-Example:
-compact-flash@50000000 {
-	compatible = "atmel,at91rm9200-cf";
-	reg = <0x50000000 0x30000000>;
-	gpios = <&pioC 13 0	/* irq */
-		 &pioC 15 0 	/* detect */
-		 0		/* vcc */
-		 &pioC  5 0	/* reset */
-		>;
-};
diff --git a/Bindings/ata/mediatek,mtk-ahci.yaml b/Bindings/ata/mediatek,mtk-ahci.yaml
new file mode 100644
index 0000000000..a34bd2e9c3
--- /dev/null
+++ b/Bindings/ata/mediatek,mtk-ahci.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Serial ATA controller
+
+maintainers:
+  - Ryder Lee <ryder.lee@mediatek.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-ahci
+      - const: mediatek,mtk-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: hostc
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: asic
+      - const: rbc
+      - const: pm
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: sw
+      - const: reg
+
+  mediatek,phy-mode:
+    description: System controller phandle, used to enable SATA function
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt7622-power.h>
+    #include <dt-bindings/reset/mt7622-reset.h>
+
+    sata@1a200000 {
+        compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci";
+        reg = <0x1a200000 0x1100>;
+        interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "hostc";
+        clocks = <&pciesys CLK_SATA_AHB_EN>,
+                 <&pciesys CLK_SATA_AXI_EN>,
+                 <&pciesys CLK_SATA_ASIC_EN>,
+                 <&pciesys CLK_SATA_RBC_EN>,
+                 <&pciesys CLK_SATA_PM_EN>;
+        clock-names = "ahb", "axi", "asic", "rbc", "pm";
+        phys = <&u3port1 PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        ports-implemented = <0x1>;
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+        resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+                 <&pciesys MT7622_SATA_PHY_SW_RST>,
+                 <&pciesys MT7622_SATA_PHY_REG_RST>;
+        reset-names = "axi", "sw", "reg";
+        mediatek,phy-mode = <&pciesys>;
+    };
diff --git a/Bindings/auxdisplay/arm,versatile-lcd.yaml b/Bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd032a..439f7b811a 100644
--- a/Bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@ additionalProperties: false
 examples:
   - |
     lcd@10008000 {
-            compatible = "arm,versatile-lcd";
-            reg = <0x10008000 0x1000>;
+        compatible = "arm,versatile-lcd";
+        reg = <0x10008000 0x1000>;
     };
diff --git a/Bindings/auxdisplay/gpio-7-segment.yaml b/Bindings/auxdisplay/gpio-7-segment.yaml
new file mode 100644
index 0000000000..328954893c
--- /dev/null
+++ b/Bindings/auxdisplay/gpio-7-segment.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO based LED segment display
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: gpio-7-segment
+
+  segment-gpios:
+    description: |
+      An array of GPIOs one per segment. The first GPIO corresponds to the A
+      segment, the seventh GPIO corresponds to the G segment. Some LED blocks
+      also have a decimal point which can be specified as an optional eighth
+      segment.
+
+               -a-
+              |   |
+              f   b
+              |   |
+               -g-
+              |   |
+              e   c
+              |   |
+               -d-  dp
+
+    minItems: 7
+    maxItems: 8
+
+required:
+  - segment-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+
+    led-7seg {
+        compatible = "gpio-7-segment";
+        segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                        <&gpio 1 GPIO_ACTIVE_LOW>,
+                        <&gpio 2 GPIO_ACTIVE_LOW>,
+                        <&gpio 3 GPIO_ACTIVE_LOW>,
+                        <&gpio 4 GPIO_ACTIVE_LOW>,
+                        <&gpio 5 GPIO_ACTIVE_LOW>,
+                        <&gpio 6 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Bindings/auxdisplay/hit,hd44780.yaml b/Bindings/auxdisplay/hit,hd44780.yaml
index 406a922a71..3ca0e9863d 100644
--- a/Bindings/auxdisplay/hit,hd44780.yaml
+++ b/Bindings/auxdisplay/hit,hd44780.yaml
@@ -84,42 +84,44 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    auxdisplay {
-            compatible = "hit,hd44780";
-
-            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-                         <&hc595 1 GPIO_ACTIVE_HIGH>,
-                         <&hc595 2 GPIO_ACTIVE_HIGH>,
-                         <&hc595 3 GPIO_ACTIVE_HIGH>;
-            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-
-            display-height-chars = <2>;
-            display-width-chars = <16>;
+    display-controller {
+        compatible = "hit,hd44780";
+
+        data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                     <&hc595 1 GPIO_ACTIVE_HIGH>,
+                     <&hc595 2 GPIO_ACTIVE_HIGH>,
+                     <&hc595 3 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+        display-height-chars = <2>;
+        display-width-chars = <16>;
     };
+
   - |
     #include <dt-bindings/gpio/gpio.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            pcf8574: pcf8574@27 {
-                    compatible = "nxp,pcf8574";
-                    reg = <0x27>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcf8574: gpio-expander@27 {
+            compatible = "nxp,pcf8574";
+            reg = <0x27>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
     };
-    hd44780 {
-            compatible = "hit,hd44780";
-            display-height-chars = <2>;
-            display-width-chars = <16>;
-            data-gpios = <&pcf8574 4 0>,
-                         <&pcf8574 5 0>,
-                         <&pcf8574 6 0>,
-                         <&pcf8574 7 0>;
-            enable-gpios = <&pcf8574 2 0>;
-            rs-gpios = <&pcf8574 0 0>;
-            rw-gpios = <&pcf8574 1 0>;
-            backlight-gpios = <&pcf8574 3 0>;
+
+    display-controller {
+        compatible = "hit,hd44780";
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+        data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 5 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 6 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 7 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>;
+        rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>;
+        backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>;
     };
diff --git a/Bindings/auxdisplay/holtek,ht16k33.yaml b/Bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b..b90eec2077 100644
--- a/Bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Bindings/auxdisplay/holtek,ht16k33.yaml
@@ -74,31 +74,31 @@ examples:
     #include <dt-bindings/input/input.h>
     #include <dt-bindings/leds/common.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            ht16k33: ht16k33@70 {
-                    compatible = "holtek,ht16k33";
-                    reg = <0x70>;
-                    refresh-rate-hz = <20>;
-                    interrupt-parent = <&gpio4>;
-                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-                    debounce-delay-ms = <50>;
-                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
-                                   <MATRIX_KEY(3, 0, KEY_F8)>,
-                                   <MATRIX_KEY(4, 0, KEY_F10)>,
-                                   <MATRIX_KEY(5, 0, KEY_F4)>,
-                                   <MATRIX_KEY(6, 0, KEY_F2)>,
-                                   <MATRIX_KEY(2, 1, KEY_F5)>,
-                                   <MATRIX_KEY(3, 1, KEY_F7)>,
-                                   <MATRIX_KEY(4, 1, KEY_F9)>,
-                                   <MATRIX_KEY(5, 1, KEY_F3)>,
-                                   <MATRIX_KEY(6, 1, KEY_F1)>;
-
-                    led {
-                            color = <LED_COLOR_ID_RED>;
-                            function = LED_FUNCTION_BACKLIGHT;
-                            linux,default-trigger = "backlight";
-                    };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@70 {
+            compatible = "holtek,ht16k33";
+            reg = <0x70>;
+            refresh-rate-hz = <20>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+            debounce-delay-ms = <50>;
+            linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                           <MATRIX_KEY(3, 0, KEY_F8)>,
+                           <MATRIX_KEY(4, 0, KEY_F10)>,
+                           <MATRIX_KEY(5, 0, KEY_F4)>,
+                           <MATRIX_KEY(6, 0, KEY_F2)>,
+                           <MATRIX_KEY(2, 1, KEY_F5)>,
+                           <MATRIX_KEY(3, 1, KEY_F7)>,
+                           <MATRIX_KEY(4, 1, KEY_F9)>,
+                           <MATRIX_KEY(5, 1, KEY_F3)>,
+                           <MATRIX_KEY(6, 1, KEY_F1)>;
+
+            led {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_BACKLIGHT;
+                linux,default-trigger = "backlight";
             };
-      };
+        };
+    };
diff --git a/Bindings/auxdisplay/img,ascii-lcd.yaml b/Bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23de7..55e9831b3f 100644
--- a/Bindings/auxdisplay/img,ascii-lcd.yaml
+++ b/Bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@ additionalProperties: false
 examples:
   - |
     lcd: lcd@17fff000 {
-            compatible = "img,boston-lcd";
-            reg = <0x17fff000 0x8>;
+        compatible = "img,boston-lcd";
+        reg = <0x17fff000 0x8>;
     };
diff --git a/Bindings/auxdisplay/maxim,max6959.yaml b/Bindings/auxdisplay/maxim,max6959.yaml
new file mode 100644
index 0000000000..20dd9e8c81
--- /dev/null
+++ b/Bindings/auxdisplay/maxim,max6959.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX6958/6959 7-segment LED display controller
+
+maintainers:
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+description:
+  The Maxim MAX6958/6959 7-segment LED display controller provides
+  an I2C interface to up to four 7-segment LED digits. The MAX6959,
+  in comparison to MAX6958, adds input support. Type of the chip can
+  be autodetected via specific register read, and hence the features
+  may be enabled in the driver at run-time, in case they are requested
+  via Device Tree. A given hardware is simple and does not provide
+  any additional pins, such as reset or power enable.
+
+properties:
+  compatible:
+    const: maxim,max6959
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@38 {
+            compatible = "maxim,max6959";
+            reg = <0x38>;
+        };
+    };
diff --git a/Bindings/bus/brcm,gisb-arb.yaml b/Bindings/bus/brcm,gisb-arb.yaml
index 3aaefdbe36..9017c5a3f3 100644
--- a/Bindings/bus/brcm,gisb-arb.yaml
+++ b/Bindings/bus/brcm,gisb-arb.yaml
@@ -18,6 +18,7 @@ properties:
           - const: brcm,gisb-arb
       - items:
           - enum:
+              - brcm,bcm74165-gisb-arb  # for V7 new style 16nm chips
               - brcm,bcm7278-gisb-arb  # for V7 28nm chips
               - brcm,bcm7435-gisb-arb  # for newer 40nm chips
               - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
diff --git a/Bindings/bus/imx-weim.txt b/Bindings/bus/imx-weim.txt
deleted file mode 100644
index e7f502070d..0000000000
--- a/Bindings/bus/imx-weim.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-Device tree bindings for i.MX Wireless External Interface Module (WEIM)
-
-The term "wireless" does not imply that the WEIM is literally an interface
-without wires. It simply means that this module was originally designed for
-wireless and mobile applications that use low-power technology.
-
-The actual devices are instantiated from the child nodes of a WEIM node.
-
-Required properties:
-
- - compatible:		Should contain one of the following:
-			  "fsl,imx1-weim"
-			  "fsl,imx27-weim"
-			  "fsl,imx51-weim"
-			  "fsl,imx50-weim"
-			  "fsl,imx6q-weim"
- - reg:			A resource specifier for the register space
-			(see the example below)
- - clocks:		the clock, see the example below.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-Optional properties:
-
- - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, it should be the phandle to the system General
-			Purpose Register controller that contains WEIM CS GPR
-			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
-			should be set up as one of the following 4 possible
-			values depending on the CS space configuration.
-
-			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
-			---------------------------------------------
-				05	    128M     0M     0M     0M
-				033          64M    64M     0M     0M
-				0113         64M    32M    32M     0M
-				01111        32M    32M    32M    32M
-
-			In case that the property is absent, the reset value or
-			what bootloader sets up in IOMUXC_GPR1[11:0] will be
-			used.
-
- - fsl,burst-clk-enable	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, the presence of this property indicates that
-			the weim bus should operate in Burst Clock Mode.
-
- - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
-			Without this option Burst Clock will output clock
-			only when necessary. This takes effect only if
-			"fsl,burst-clk-enable" is set.
-
-Timing property for child nodes. It is mandatory, not optional.
-
- - fsl,weim-cs-timing:	The timing array, contains timing values for the
-			child node. We get the CS indexes from the address
-			ranges in the child node's "reg" property.
-			The number of registers depends on the selected chip:
-			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
-			registers: CSxU, CSxL.
-			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
-			there are three registers: CSCRxU, CSCRxL, CSCRxA.
-			For i.MX50, i.MX53 ("fsl,imx50-weim"),
-			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
-			there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
-			CSxRCR2, CSxWCR1, CSxWCR2.
-
-Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x08000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		nor@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-					0x0000c000 0x1404a38e 0x00000000>;
-		};
-	};
-
-Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
-
-In this case, both chip select 0 and 1 will be configured with the same timing
-array values.
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x02000000
-			  1 0 0x0a000000 0x02000000
-			  2 0 0x0c000000 0x02000000
-			  3 0 0x0e000000 0x02000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		acme@0 {
-			compatible = "acme,whatever";
-			reg = <0 0 0x100>, <0 0x400000 0x800>,
-				<1 0x400000 0x800>;
-			fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
-				0x00000000 0xa0000240 0x00000000>;
-		};
-	};
diff --git a/Bindings/clock/google,gs101-clock.yaml b/Bindings/clock/google,gs101-clock.yaml
index ca7fdada3f..1d2bcea41c 100644
--- a/Bindings/clock/google,gs101-clock.yaml
+++ b/Bindings/clock/google,gs101-clock.yaml
@@ -30,14 +30,16 @@ properties:
       - google,gs101-cmu-top
       - google,gs101-cmu-apm
       - google,gs101-cmu-misc
+      - google,gs101-cmu-peric0
+      - google,gs101-cmu-peric1
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   clock-names:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   "#clock-cells":
     const: 1
@@ -88,6 +90,28 @@ allOf:
             - const: bus
             - const: sss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-peric0
+              - google,gs101-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: Connectivity Peripheral 0/1 bus clock (from CMU_TOP)
+            - description: Connectivity Peripheral 0/1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: ip
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/clock/keystone-gate.txt b/Bindings/clock/keystone-gate.txt
index c5aa187026..43f6fb6c93 100644
--- a/Bindings/clock/keystone-gate.txt
+++ b/Bindings/clock/keystone-gate.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for Keystone gate control driver which uses PSC controller IP.
 
 This binding uses the common clock binding[1].
diff --git a/Bindings/clock/keystone-pll.txt b/Bindings/clock/keystone-pll.txt
index 9a3fbc6656..69b0eb7c03 100644
--- a/Bindings/clock/keystone-pll.txt
+++ b/Bindings/clock/keystone-pll.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for keystone PLLs. The main PLL IP typically has a multiplier,
 a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
 and PAPLL are controlled by the memory mapped register where as the Main
diff --git a/Bindings/clock/mediatek,mt2701-hifsys.yaml b/Bindings/clock/mediatek,mt2701-hifsys.yaml
new file mode 100644
index 0000000000..9e7c725093
--- /dev/null
+++ b/Bindings/clock/mediatek,mt2701-hifsys.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt2701-hifsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek HIFSYS clock and reset controller
+
+description:
+  The MediaTek HIFSYS controller provides various clocks and reset outputs to
+  the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-hifsys
+          - mediatek,mt7622-hifsys
+      - items:
+          - enum:
+              - mediatek,mt7623-hifsys
+          - const: mediatek,mt2701-hifsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt2701-hifsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt7622-pciesys.yaml b/Bindings/clock/mediatek,mt7622-pciesys.yaml
new file mode 100644
index 0000000000..c77111d10f
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7622-pciesys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-pciesys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIESYS clock and reset controller
+
+description:
+  The MediaTek PCIESYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-pciesys
+      - mediatek,mt7629-pciesys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a100800 {
+        compatible = "mediatek,mt7622-pciesys";
+        reg = <0x1a100800 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt7622-ssusbsys.yaml b/Bindings/clock/mediatek,mt7622-ssusbsys.yaml
new file mode 100644
index 0000000000..da93eccdcf
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7622-ssusbsys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-ssusbsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SSUSBSYS clock and reset controller
+
+description:
+  The MediaTek SSUSBSYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-ssusbsys
+      - mediatek,mt7629-ssusbsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt7622-ssusbsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mobileye,eyeq5-clk.yaml b/Bindings/clock/mobileye,eyeq5-clk.yaml
new file mode 100644
index 0000000000..2d4f2cde1e
--- /dev/null
+++ b/Bindings/clock/mobileye,eyeq5-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 clock controller
+
+description:
+  The EyeQ5 clock controller handles 10 read-only PLLs derived from the main
+  crystal clock. It also exposes one divider clock, a child of one of the PLLs.
+  Its registers live in a shared region called OLB.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+properties:
+  compatible:
+    const: mobileye,eyeq5-clk
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: plls
+      - const: ospi
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    items:
+      - const: ref
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
diff --git a/Bindings/clock/qcom,gcc-sc8180x.yaml b/Bindings/clock/qcom,gcc-sc8180x.yaml
index 6c4846b34e..a1085ef4fd 100644
--- a/Bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/Bindings/clock/qcom,gcc-sc8180x.yaml
@@ -31,10 +31,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
+  power-domains:
+    items:
+      - description: CX domain
+
 required:
   - compatible
   - clocks
   - clock-names
+  - power-domains
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -44,6 +49,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sc8180x";
       reg = <0x00100000 0x1f0000>;
@@ -51,6 +57,7 @@ examples:
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC8180X_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Bindings/clock/qcom,gpucc.yaml b/Bindings/clock/qcom,gpucc.yaml
index f369fa34e0..f57aceddac 100644
--- a/Bindings/clock/qcom,gpucc.yaml
+++ b/Bindings/clock/qcom,gpucc.yaml
@@ -53,6 +53,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  vdd-gfx-supply:
+    description: Regulator supply for the VDD_GFX pads
+
   '#clock-cells':
     const: 1
 
@@ -74,6 +77,12 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+# Require that power-domains and vdd-gfx-supply are not both present
+not:
+  required:
+    - power-domains
+    - vdd-gfx-supply
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/clock/qcom,q6sstopcc.yaml b/Bindings/clock/qcom,q6sstopcc.yaml
index 03fa30fe92..e0f4d69272 100644
--- a/Bindings/clock/qcom,q6sstopcc.yaml
+++ b/Bindings/clock/qcom,q6sstopcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Q6SSTOP clock Controller
 
 maintainers:
-  - Govind Singh <govinds@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 properties:
   compatible:
diff --git a/Bindings/clock/qcom,sc7180-mss.yaml b/Bindings/clock/qcom,sc7180-mss.yaml
deleted file mode 100644
index 873a2f918b..0000000000
--- a/Bindings/clock/qcom,sc7180-mss.yaml
+++ /dev/null
@@ -1,61 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Modem Clock Controller on SC7180
-
-maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
-
-description: |
-  Qualcomm modem clock control module provides the clocks on SC7180.
-
-  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
-
-properties:
-  compatible:
-    const: qcom,sc7180-mss
-
-  clocks:
-    items:
-      - description: gcc_mss_mfab_axi clock from GCC
-      - description: gcc_mss_nav_axi clock from GCC
-      - description: gcc_mss_cfg_ahb clock from GCC
-
-  clock-names:
-    items:
-      - const: gcc_mss_mfab_axis
-      - const: gcc_mss_nav_axi
-      - const: cfg_ahb
-
-  '#clock-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    clock-controller@41a8000 {
-      compatible = "qcom,sc7180-mss";
-      reg = <0x041a8000 0x8000>;
-      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-               <&gcc GCC_MSS_NAV_AXI_CLK>,
-               <&gcc GCC_MSS_CFG_AHB_CLK>;
-      clock-names = "gcc_mss_mfab_axis",
-                    "gcc_mss_nav_axi",
-                    "cfg_ahb";
-      #clock-cells = <1>;
-    };
-...
diff --git a/Bindings/clock/qcom,sm8450-camcc.yaml b/Bindings/clock/qcom,sm8450-camcc.yaml
index 48986460f9..fa0e5b6b02 100644
--- a/Bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Bindings/clock/qcom,sm8450-camcc.yaml
@@ -17,6 +17,7 @@ description: |
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
     include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+    include/dt-bindings/clock/qcom,x1e80100-camcc.h
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -27,6 +28,7 @@ properties:
       - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
+      - qcom,x1e80100-camcc
 
   clocks:
     items:
diff --git a/Bindings/clock/qcom,sm8450-gpucc.yaml b/Bindings/clock/qcom,sm8450-gpucc.yaml
index 1a384e8532..36974309cf 100644
--- a/Bindings/clock/qcom,sm8450-gpucc.yaml
+++ b/Bindings/clock/qcom,sm8450-gpucc.yaml
@@ -18,6 +18,7 @@ description: |
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
     include/dt-bindings/reset/qcom,sm8650-gpucc.h
+    include/dt-bindings/reset/qcom,x1e80100-gpucc.h
 
 properties:
   compatible:
@@ -25,6 +26,7 @@ properties:
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
       - qcom,sm8650-gpucc
+      - qcom,x1e80100-gpucc
 
   clocks:
     items:
diff --git a/Bindings/clock/qcom,sm8550-dispcc.yaml b/Bindings/clock/qcom,sm8550-dispcc.yaml
index c129f8c16b..bad0260764 100644
--- a/Bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Bindings/clock/qcom,sm8550-dispcc.yaml
@@ -14,12 +14,17 @@ description: |
   Qualcomm display clock control module provides the clocks, resets and power
   domains on SM8550.
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8650-dispcc.h
+  - include/dt-bindings/clock/qcom,x1e80100-dispcc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8550-dispcc
+      - qcom,sm8650-dispcc
+      - qcom,x1e80100-dispcc
 
   clocks:
     items:
diff --git a/Bindings/clock/qcom,sm8550-tcsr.yaml b/Bindings/clock/qcom,sm8550-tcsr.yaml
index af16b05eac..48fdd562d7 100644
--- a/Bindings/clock/qcom,sm8550-tcsr.yaml
+++ b/Bindings/clock/qcom,sm8550-tcsr.yaml
@@ -23,6 +23,7 @@ properties:
       - enum:
           - qcom,sm8550-tcsr
           - qcom,sm8650-tcsr
+          - qcom,x1e80100-tcsr
       - const: syscon
 
   clocks:
diff --git a/Bindings/clock/qcom,sm8650-dispcc.yaml b/Bindings/clock/qcom,sm8650-dispcc.yaml
deleted file mode 100644
index 5e0c45c380..0000000000
--- a/Bindings/clock/qcom,sm8650-dispcc.yaml
+++ /dev/null
@@ -1,106 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display Clock & Reset Controller for SM8650
-
-maintainers:
-  - Bjorn Andersson <andersson@kernel.org>
-  - Neil Armstrong <neil.armstrong@linaro.org>
-
-description: |
-  Qualcomm display clock control module provides the clocks, resets and power
-  domains on SM8650.
-
-  See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
-
-properties:
-  compatible:
-    enum:
-      - qcom,sm8650-dispcc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: Board Always On XO source
-      - description: Display's AHB clock
-      - description: sleep clock
-      - description: Byte clock from DSI PHY0
-      - description: Pixel clock from DSI PHY0
-      - description: Byte clock from DSI PHY1
-      - description: Pixel clock from DSI PHY1
-      - description: Link clock from DP PHY0
-      - description: VCO DIV clock from DP PHY0
-      - description: Link clock from DP PHY1
-      - description: VCO DIV clock from DP PHY1
-      - description: Link clock from DP PHY2
-      - description: VCO DIV clock from DP PHY2
-      - description: Link clock from DP PHY3
-      - description: VCO DIV clock from DP PHY3
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  power-domains:
-    description:
-      A phandle and PM domain specifier for the MMCX power domain.
-    maxItems: 1
-
-  required-opps:
-    description:
-      A phandle to an OPP node describing required MMCX performance point.
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-    #include <dt-bindings/power/qcom,rpmhpd.h>
-    clock-controller@af00000 {
-      compatible = "qcom,sm8650-dispcc";
-      reg = <0x0af00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&gcc GCC_DISP_AHB_CLK>,
-               <&sleep_clk>,
-               <&dsi0_phy 0>,
-               <&dsi0_phy 1>,
-               <&dsi1_phy 0>,
-               <&dsi1_phy 1>,
-               <&dp0_phy 0>,
-               <&dp0_phy 1>,
-               <&dp1_phy 0>,
-               <&dp1_phy 1>,
-               <&dp2_phy 0>,
-               <&dp2_phy 1>,
-               <&dp3_phy 0>,
-               <&dp3_phy 1>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      power-domains = <&rpmhpd RPMHPD_MMCX>;
-      required-opps = <&rpmhpd_opp_low_svs>;
-    };
-...
diff --git a/Bindings/clock/renesas,cpg-mssr.yaml b/Bindings/clock/renesas,cpg-mssr.yaml
index 9c3dc6c4fa..084259d302 100644
--- a/Bindings/clock/renesas,cpg-mssr.yaml
+++ b/Bindings/clock/renesas,cpg-mssr.yaml
@@ -50,6 +50,7 @@ properties:
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
       - renesas,r8a779f0-cpg-mssr # R-Car S4-8
       - renesas,r8a779g0-cpg-mssr # R-Car V4H
+      - renesas,r8a779h0-cpg-mssr # R-Car V4M
 
   reg:
     maxItems: 1
diff --git a/Bindings/clock/samsung,exynos850-clock.yaml b/Bindings/clock/samsung,exynos850-clock.yaml
index c752c8985a..cdc5ded59f 100644
--- a/Bindings/clock/samsung,exynos850-clock.yaml
+++ b/Bindings/clock/samsung,exynos850-clock.yaml
@@ -36,6 +36,8 @@ properties:
       - samsung,exynos850-cmu-aud
       - samsung,exynos850-cmu-cmgp
       - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-cpucl0
+      - samsung,exynos850-cmu-cpucl1
       - samsung,exynos850-cmu-dpu
       - samsung,exynos850-cmu-g3d
       - samsung,exynos850-cmu-hsi
@@ -152,6 +154,46 @@ allOf:
             - const: dout_core_mmc_embd
             - const: dout_core_sss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cpucl0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL0 switch clock (from CMU_TOP)
+            - description: CPUCL0 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl0_switch
+            - const: dout_cpucl0_dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cpucl1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL1 switch clock (from CMU_TOP)
+            - description: CPUCL1 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl1_switch
+            - const: dout_cpucl1_dbg
+
   - if:
       properties:
         compatible:
diff --git a/Bindings/clock/tesla,fsd-clock.yaml b/Bindings/clock/tesla,fsd-clock.yaml
index dc808e2f83..b370a10a23 100644
--- a/Bindings/clock/tesla,fsd-clock.yaml
+++ b/Bindings/clock/tesla,fsd-clock.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 description: |
   FSD clock controller consist of several clock management unit
-  (CMU), which generates clocks for various inteernal SoC blocks.
+  (CMU), which generates clocks for various internal SoC blocks.
   The root clock comes from external OSC clock (24 MHz).
 
   All available clocks are defined as preprocessor macros in
diff --git a/Bindings/clock/ti/adpll.txt b/Bindings/clock/ti/adpll.txt
index 4c8a2ce2cd..3122360adc 100644
--- a/Bindings/clock/ti/adpll.txt
+++ b/Bindings/clock/ti/adpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments ADPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped ADPLL with two to three selectable input clocks
 and three to four children.
diff --git a/Bindings/clock/ti/apll.txt b/Bindings/clock/ti/apll.txt
index ade4dd4c30..bbd505c119 100644
--- a/Bindings/clock/ti/apll.txt
+++ b/Bindings/clock/ti/apll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments APLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped APLL with usually two selectable input clocks
 (reference clock and bypass clock), with analog phase locked
diff --git a/Bindings/clock/ti/autoidle.txt b/Bindings/clock/ti/autoidle.txt
index 7c735dde9f..05645a10a9 100644
--- a/Bindings/clock/ti/autoidle.txt
+++ b/Bindings/clock/ti/autoidle.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments autoidle clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a register mapped
 clock which can be put to idle automatically by hardware based on the usage
 and a configuration bit setting. Autoidle clock is never an individual
diff --git a/Bindings/clock/ti/clockdomain.txt b/Bindings/clock/ti/clockdomain.txt
index 9c6199249c..edf0b5d427 100644
--- a/Bindings/clock/ti/clockdomain.txt
+++ b/Bindings/clock/ti/clockdomain.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments clockdomain.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1] in consumer role.
 Every clock on TI SoC belongs to one clockdomain, but software
 only needs this information for specific clocks which require
diff --git a/Bindings/clock/ti/composite.txt b/Bindings/clock/ti/composite.txt
index 33ac7c9ad0..6f7e1331b5 100644
--- a/Bindings/clock/ti/composite.txt
+++ b/Bindings/clock/ti/composite.txt
@@ -1,7 +1,5 @@
 Binding for TI composite clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped composite clock with multiple different sub-types;
 
diff --git a/Bindings/clock/ti/divider.txt b/Bindings/clock/ti/divider.txt
index 9b13b32974..4d7c76f0b3 100644
--- a/Bindings/clock/ti/divider.txt
+++ b/Bindings/clock/ti/divider.txt
@@ -1,7 +1,5 @@
 Binding for TI divider clock
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped adjustable clock rate divider that does not gate and has
 only one input clock or parent.  By default the value programmed into
diff --git a/Bindings/clock/ti/dpll.txt b/Bindings/clock/ti/dpll.txt
index 37a7cb6ad0..14a1b72c2e 100644
--- a/Bindings/clock/ti/dpll.txt
+++ b/Bindings/clock/ti/dpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments DPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped DPLL with usually two selectable input clocks
 (reference clock and bypass clock), with digital phase locked
diff --git a/Bindings/clock/ti/fapll.txt b/Bindings/clock/ti/fapll.txt
index c19b3f253b..88986ef39d 100644
--- a/Bindings/clock/ti/fapll.txt
+++ b/Bindings/clock/ti/fapll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments FAPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped FAPLL with usually two selectable input clocks
 (reference clock and bypass clock), and one or more child
diff --git a/Bindings/clock/ti/fixed-factor-clock.txt b/Bindings/clock/ti/fixed-factor-clock.txt
index 518e3c1422..dc69477b6e 100644
--- a/Bindings/clock/ti/fixed-factor-clock.txt
+++ b/Bindings/clock/ti/fixed-factor-clock.txt
@@ -1,7 +1,5 @@
 Binding for TI fixed factor rate clock sources.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1], and also uses the autoidle
 support from TI autoidle clock [2].
 
diff --git a/Bindings/clock/ti/gate.txt b/Bindings/clock/ti/gate.txt
index 4982615c01..a8e0335b00 100644
--- a/Bindings/clock/ti/gate.txt
+++ b/Bindings/clock/ti/gate.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments gate clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features. If no register
diff --git a/Bindings/clock/ti/interface.txt b/Bindings/clock/ti/interface.txt
index d3eb5ca92a..85fb1f2d2d 100644
--- a/Bindings/clock/ti/interface.txt
+++ b/Bindings/clock/ti/interface.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments interface clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features, including
diff --git a/Bindings/clock/ti/mux.txt b/Bindings/clock/ti/mux.txt
index b33f641f10..cd56d3c1c0 100644
--- a/Bindings/clock/ti/mux.txt
+++ b/Bindings/clock/ti/mux.txt
@@ -1,7 +1,5 @@
 Binding for TI mux clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped multiplexer with multiple input clock signals or
 parents, one of which can be selected as output.  This clock does not
diff --git a/Bindings/crypto/atmel,at91sam9g46-aes.yaml b/Bindings/crypto/atmel,at91sam9g46-aes.yaml
index 0b7383b310..7dc0748444 100644
--- a/Bindings/crypto/atmel,at91sam9g46-aes.yaml
+++ b/Bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-aes
+    oneOf:
+      - const: atmel,at91sam9g46-aes
+      - items:
+          - const: microchip,sam9x7-aes
+          - const: atmel,at91sam9g46-aes
 
   reg:
     maxItems: 1
diff --git a/Bindings/crypto/atmel,at91sam9g46-sha.yaml b/Bindings/crypto/atmel,at91sam9g46-sha.yaml
index ee2ffb0343..d378c53314 100644
--- a/Bindings/crypto/atmel,at91sam9g46-sha.yaml
+++ b/Bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-sha
+    oneOf:
+      - const: atmel,at91sam9g46-sha
+      - items:
+          - const: microchip,sam9x7-sha
+          - const: atmel,at91sam9g46-sha
 
   reg:
     maxItems: 1
diff --git a/Bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Bindings/crypto/atmel,at91sam9g46-tdes.yaml
index 3d6ed24b1b..6a441f79ef 100644
--- a/Bindings/crypto/atmel,at91sam9g46-tdes.yaml
+++ b/Bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-tdes
+    oneOf:
+      - const: atmel,at91sam9g46-tdes
+      - items:
+          - const: microchip,sam9x7-tdes
+          - const: atmel,at91sam9g46-tdes
 
   reg:
     maxItems: 1
diff --git a/Bindings/crypto/qcom,inline-crypto-engine.yaml b/Bindings/crypto/qcom,inline-crypto-engine.yaml
index 09e43157cc..e91bc7dc6a 100644
--- a/Bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - qcom,sa8775p-inline-crypto-engine
+          - qcom,sc7180-inline-crypto-engine
           - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
           - qcom,sm8650-inline-crypto-engine
diff --git a/Bindings/crypto/qcom-qce.yaml b/Bindings/crypto/qcom-qce.yaml
index a48bd38106..e285e382d4 100644
--- a/Bindings/crypto/qcom-qce.yaml
+++ b/Bindings/crypto/qcom-qce.yaml
@@ -45,6 +45,7 @@ properties:
       - items:
           - enum:
               - qcom,sc7280-qce
+              - qcom,sm6350-qce
               - qcom,sm8250-qce
               - qcom,sm8350-qce
               - qcom,sm8450-qce
diff --git a/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 0000000000..29ed42485d
--- /dev/null
+++ b/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git a/Bindings/display/atmel/hlcdc-dc.txt b/Bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 923aea2534..0000000000
--- a/Bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph representation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git a/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
new file mode 100644
index 0000000000..3791c9f4eb
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMI transmitter is a Synopsys DesignWare
+  HDMI 2.0a TX controller IP.
+
+allOf:
+  - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-tx
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iahb
+      - const: isfr
+      - const: cec
+      - const: pix
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi-tx";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+        ports {
+           #address-cells = <1>;
+           #size-cells = <0>;
+           port@0 {
+             reg = <0>;
+
+             hdmi_tx_from_pvi: endpoint {
+               remote-endpoint = <&pvi_to_hdmi_tx>;
+             };
+          };
+
+          port@1 {
+            reg = <1>;
+              hdmi_tx_out: endpoint {
+                remote-endpoint = <&hdmi0_con>;
+              };
+          };
+        };
+    };
diff --git a/Bindings/display/bridge/ti,sn65dsi86.yaml b/Bindings/display/bridge/ti,sn65dsi86.yaml
index 6ec6d287bf..c93878b6d7 100644
--- a/Bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Bindings/display/bridge/ti,sn65dsi86.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SN65DSI86 DSI to eDP bridge chip
 
 maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
 
 description: |
   The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
diff --git a/Bindings/display/fsl,lcdif.yaml b/Bindings/display/fsl,lcdif.yaml
index 1c2be8d6f6..0681fc49aa 100644
--- a/Bindings/display/fsl,lcdif.yaml
+++ b/Bindings/display/fsl,lcdif.yaml
@@ -120,13 +120,19 @@ allOf:
           maxItems: 1
         clock-names:
           maxItems: 1
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx6sx-lcdif
+    then:
+      required:
+        - power-domains
   - if:
       properties:
         compatible:
           contains:
             enum:
               - fsl,imx6sl-lcdif
-              - fsl,imx6sx-lcdif
               - fsl,imx8mm-lcdif
               - fsl,imx8mn-lcdif
               - fsl,imx8mp-lcdif
diff --git a/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 0000000000..56da163601
--- /dev/null
+++ b/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The HDMI parallel video interface is a timing and sync generator block in the
+  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pvi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from the LCDIF controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the HDMI TX controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    display-bridge@32fc4000 {
+        compatible = "fsl,imx8mp-hdmi-pvi";
+        reg = <0x32fc4000 0x44>;
+        interrupt-parent = <&irqsteer_hdmi>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                pvi_from_lcdif3: endpoint {
+                    remote-endpoint = <&lcdif3_to_pvi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                pvi_to_hdmi_tx: endpoint {
+                    remote-endpoint = <&hdmi_tx_from_pvi>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/display/msm/dsi-controller-main.yaml b/Bindings/display/msm/dsi-controller-main.yaml
index 4219936eda..1fa28e9765 100644
--- a/Bindings/display/msm/dsi-controller-main.yaml
+++ b/Bindings/display/msm/dsi-controller-main.yaml
@@ -19,6 +19,7 @@ properties:
               - qcom,msm8916-dsi-ctrl
               - qcom,msm8953-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
@@ -248,6 +249,7 @@ allOf:
           contains:
             enum:
               - qcom,msm8953-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
     then:
       properties:
         clocks:
diff --git a/Bindings/display/msm/gmu.yaml b/Bindings/display/msm/gmu.yaml
index 4e1c25b429..b3837368a2 100644
--- a/Bindings/display/msm/gmu.yaml
+++ b/Bindings/display/msm/gmu.yaml
@@ -224,6 +224,7 @@ allOf:
             enum:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
+              - qcom,adreno-gmu-750.1
     then:
       properties:
         reg:
diff --git a/Bindings/display/msm/gpu.yaml b/Bindings/display/msm/gpu.yaml
index b019db9547..40b5c6bd11 100644
--- a/Bindings/display/msm/gpu.yaml
+++ b/Bindings/display/msm/gpu.yaml
@@ -23,7 +23,7 @@ properties:
           The driver is parsing the compat string for Adreno to
           figure out the gpu-id and patch level.
         items:
-          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$'
+          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Imageon to
@@ -127,7 +127,7 @@ allOf:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$'
 
     then:
       properties:
@@ -203,7 +203,7 @@ allOf:
         properties:
           compatible:
             contains:
-              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$'
+              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
 
       then: # Starting with A6xx, the clocks are usually defined in the GMU node
         properties:
diff --git a/Bindings/display/msm/qcom,mdss.yaml b/Bindings/display/msm/qcom,mdss.yaml
index 0999ea07f4..e4576546bf 100644
--- a/Bindings/display/msm/qcom,mdss.yaml
+++ b/Bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@ patternProperties:
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git a/Bindings/display/msm/qcom,sm8150-mdss.yaml b/Bindings/display/msm/qcom,sm8150-mdss.yaml
index c0d6a4fdff..e6dc5494ba 100644
--- a/Bindings/display/msm/qcom,sm8150-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -53,6 +53,15 @@ patternProperties:
       compatible:
         const: qcom,sm8150-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8150-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true
diff --git a/Bindings/display/msm/qcom,sm8650-dpu.yaml b/Bindings/display/msm/qcom,sm8650-dpu.yaml
index a01d15a033..c4087cc5ab 100644
--- a/Bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sm8650-dpu
+    enum:
+      - qcom,sm8650-dpu
+      - qcom,x1e80100-dpu
 
   reg:
     items:
diff --git a/Bindings/display/msm/qcom,sm8650-mdss.yaml b/Bindings/display/msm/qcom,sm8650-mdss.yaml
index bd11119dc9..24cece1e88 100644
--- a/Bindings/display/msm/qcom,sm8650-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8650-mdss.yaml
@@ -37,18 +37,21 @@ properties:
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dpu
 
   "^displayport-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dp
 
   "^dsi@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         items:
@@ -57,6 +60,7 @@ patternProperties:
 
   "^phy@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dsi-phy-4nm
diff --git a/Bindings/display/msm/qcom,x1e80100-mdss.yaml b/Bindings/display/msm/qcom,x1e80100-mdss.yaml
new file mode 100644
index 0000000000..3b01a0e473
--- /dev/null
+++ b/Bindings/display/msm/qcom,x1e80100-mdss.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,x1e80100-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,x1e80100-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,x1e80100-dp";
+            reg = <0 0xae90000 0 0x200>,
+                  <0 0xae90200 0 0x200>,
+                  <0 0xae90400 0 0x600>,
+                  <0 0xae91000 0 0x400>,
+                  <0 0xae91400 0 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+               <&dispcc_dptx0_aux_clk>,
+               <&dispcc_dptx0_link_clk>,
+               <&dispcc_dptx0_link_intf_clk>,
+               <&dispcc_dptx0_pixel0_clk>;
+            clock-names = "core_iface", "core_aux",
+                    "ctrl_link",
+                    "ctrl_link_iface",
+                    "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                  <&dispcc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                  <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            operating-points-v2 = <&mdss_dp0_opp_table>;
+
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                  reg = <0>;
+
+                  mdss_dp0_in: endpoint {
+                    remote-endpoint = <&mdss_intf0_out>;
+                  };
+              };
+
+              port@1 {
+                  reg = <1>;
+
+                  mdss_dp0_out: endpoint {
+                  };
+              };
+            };
+
+            mdss_dp0_opp_table: opp-table {
+              compatible = "operating-points-v2";
+
+              opp-160000000 {
+                 opp-hz = /bits/ 64 <160000000>;
+                 required-opps = <&rpmhpd_opp_low_svs>;
+              };
+
+              opp-270000000 {
+                 opp-hz = /bits/ 64 <270000000>;
+                 required-opps = <&rpmhpd_opp_svs>;
+              };
+
+              opp-540000000 {
+                 opp-hz = /bits/ 64 <540000000>;
+                 required-opps = <&rpmhpd_opp_svs_l1>;
+              };
+
+              opp-810000000 {
+                 opp-hz = /bits/ 64 <810000000>;
+                 required-opps = <&rpmhpd_opp_nom>;
+              };
+            };
+        };
+    };
+...
diff --git a/Bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 0000000000..32df26cbfe
--- /dev/null
+++ b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+
+  reg: true
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/panel/himax,hx83112a.yaml b/Bindings/display/panel/himax,hx83112a.yaml
new file mode 100644
index 0000000000..174661d138
--- /dev/null
+++ b/Bindings/display/panel/himax,hx83112a.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112A-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  The Himax HX83112A is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,9a-3r063-1102b
+
+  vdd1-supply:
+    description: Digital voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+  reg: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd1-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,9a-3r063-1102b";
+            reg = <0>;
+
+            backlight = <&pm6150l_wled>;
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            vdd1-supply = <&vreg_l1e>;
+            vsn-supply = <&pm6150l_lcdb_ncp>;
+            vsp-supply = <&pm6150l_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index c5944b4d63..d589f16772 100644
--- a/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: leadtek,ltk500hd1829
+    enum:
+      - leadtek,ltk101b4029w
+      - leadtek,ltk500hd1829
   reg: true
   backlight: true
   reset-gpios: true
diff --git a/Bindings/display/panel/novatek,nt35510.yaml b/Bindings/display/panel/novatek,nt35510.yaml
index bc92928c80..91921f4b0e 100644
--- a/Bindings/display/panel/novatek,nt35510.yaml
+++ b/Bindings/display/panel/novatek,nt35510.yaml
@@ -15,7 +15,9 @@ allOf:
 properties:
   compatible:
     items:
-      - const: hydis,hva40wv1
+      - enum:
+          - frida,frd400b25025
+          - hydis,hva40wv1
       - const: novatek,nt35510
     description: This indicates the panel manufacturer of the panel
       that is in turn using the NT35510 panel driver. The compatible
@@ -29,6 +31,7 @@ properties:
   vddi-supply:
     description: regulator that supplies the vddi voltage
   backlight: true
+  port: true
 
 required:
   - compatible
diff --git a/Bindings/display/panel/novatek,nt36672e.yaml b/Bindings/display/panel/novatek,nt36672e.yaml
new file mode 100644
index 0000000000..dc4672f3d0
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36672e.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672E LCD DSI Panel
+
+maintainers:
+  - Ritesh Kumar <quic_riteshk@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt36672e
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply: true
+  avdd-supply: true
+  avee-supply: true
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "novatek,nt36672e";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+            vddi-supply = <&vreg_l8c_1p8>;
+            avdd-supply = <&disp_avdd>;
+            avee-supply = <&disp_avee>;
+
+            backlight = <&pwm_backlight>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Bindings/display/panel/panel-lvds.yaml b/Bindings/display/panel/panel-lvds.yaml
index 9f1016551e..155d8ffa8f 100644
--- a/Bindings/display/panel/panel-lvds.yaml
+++ b/Bindings/display/panel/panel-lvds.yaml
@@ -39,9 +39,13 @@ properties:
   compatible:
     items:
       - enum:
+          # Admatec 9904379 10.1" 1024x600 LVDS panel
+          - admatec,9904379
           - auo,b101ew05
           # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
           - chunghwa,claa070wp03xg
+          # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel
+          - edt,etml0700z9ndha
           # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
           - hannstar,hsd101pww2
           # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
index 634a10c6f2..a95445f408 100644
--- a/Bindings/display/panel/panel-simple.yaml
+++ b/Bindings/display/panel/panel-simple.yaml
@@ -73,6 +73,8 @@ properties:
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel
+      - boe,bp082wx1-100
         # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
       - boe,bp101wx1-100
         # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
@@ -141,6 +143,8 @@ properties:
       - edt,etm0700g0edh6
         # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
       - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch
+      - edt,etml1010g3dra
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
diff --git a/Bindings/display/panel/rocktech,jh057n00900.yaml b/Bindings/display/panel/rocktech,jh057n00900.yaml
index 97cccd8a84..6ec471284f 100644
--- a/Bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Bindings/display/panel/rocktech,jh057n00900.yaml
@@ -22,6 +22,8 @@ properties:
     enum:
       # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
       - anbernic,rg353v-panel-v2
+      # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
+      - powkiddy,rgb10max3-panel
       # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
       - powkiddy,rgb30-panel
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
@@ -43,6 +45,7 @@ properties:
   reset-gpios: true
 
   backlight: true
+  rotation: true
 
 required:
   - compatible
diff --git a/Bindings/display/panel/visionox,r66451.yaml b/Bindings/display/panel/visionox,r66451.yaml
index 6ba3236839..187840bb76 100644
--- a/Bindings/display/panel/visionox,r66451.yaml
+++ b/Bindings/display/panel/visionox,r66451.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
diff --git a/Bindings/display/panel/visionox,rm69299.yaml b/Bindings/display/panel/visionox,rm69299.yaml
index fa745a6f44..7723990675 100644
--- a/Bindings/display/panel/visionox,rm69299.yaml
+++ b/Bindings/display/panel/visionox,rm69299.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Visionox model RM69299 Panels
 
 maintainers:
-  - Harigovindan P <harigovi@codeaurora.org>
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
 
 description: |
   This binding is for display panels using a Visionox RM692999 panel.
diff --git a/Bindings/display/renesas,rzg2l-du.yaml b/Bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 0000000000..08e5b94780
--- /dev/null
+++ b/Bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+  and RZ/V2L SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-du # RZ/G2{L,LC}
+      - items:
+          - enum:
+              - renesas,r9a07g054-du    # RZ/V2L
+          - const: renesas,r9a07g044-du # RZ/G2L fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings. The number of ports and their assignment are
+      model-dependent. Each port shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  renesas,vsps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - ports
+  - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # RZ/G2L DU
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@10890000 {
+        compatible = "renesas,r9a07g044-du";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+        clock-names = "aclk", "pclk", "vclk";
+        resets = <&cpg R9A07G044_LCDC_RESET_N>;
+        power-domains = <&cpg>;
+
+        renesas,vsps = <&vspd0 0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 7e59dee15a..af638b6c0d 100644
--- a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -94,11 +94,14 @@ properties:
       - const: default
       - const: unwedge
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    patternProperties:
-      "^port(@0)?$":
+    properties:
+      port@0:
         $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
         properties:
@@ -108,11 +111,14 @@ properties:
             description: Connection to the VOPB
           endpoint@1:
             description: Connection to the VOPL
-    properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: Output of the DWC HDMI TX
 
+    required:
+      - port@0
+      - port@1
+
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -135,19 +141,25 @@ examples:
     #include <dt-bindings/clock/rk3288-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
 
     hdmi: hdmi@ff980000 {
         compatible = "rockchip,rk3288-dw-hdmi";
         reg = <0xff980000 0x20000>;
         reg-io-width = <4>;
-        ddc-i2c-bus = <&i2c5>;
-        rockchip,grf = <&grf>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
         clock-names = "iahb", "isfr";
+        ddc-i2c-bus = <&i2c5>;
+        power-domains = <&power RK3288_PD_VIO>;
+        rockchip,grf = <&grf>;
 
         ports {
-            port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
                 #address-cells = <1>;
                 #size-cells = <0>;
 
@@ -155,11 +167,20 @@ examples:
                     reg = <0>;
                     remote-endpoint = <&vopb_out_hdmi>;
                 };
+
                 hdmi_in_vopl: endpoint@1 {
                     reg = <1>;
                     remote-endpoint = <&vopl_out_hdmi>;
                 };
             };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
         };
     };
 
diff --git a/Bindings/display/solomon,ssd1307fb.yaml b/Bindings/display/solomon,ssd1307fb.yaml
index 3afbb52d1b..153ff86fb4 100644
--- a/Bindings/display/solomon,ssd1307fb.yaml
+++ b/Bindings/display/solomon,ssd1307fb.yaml
@@ -131,9 +131,9 @@ allOf:
             const: sinowealth,sh1106
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -149,9 +149,9 @@ allOf:
               - solomon,ssd1305
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -167,9 +167,9 @@ allOf:
               - solomon,ssd1306
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -185,9 +185,9 @@ allOf:
               - solomon,ssd1307
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 39
         solomon,dclk-div:
           default: 2
@@ -205,9 +205,9 @@ allOf:
               - solomon,ssd1309
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
diff --git a/Bindings/display/solomon,ssd132x.yaml b/Bindings/display/solomon,ssd132x.yaml
index 37975ee61c..dd7939989c 100644
--- a/Bindings/display/solomon,ssd132x.yaml
+++ b/Bindings/display/solomon,ssd132x.yaml
@@ -30,9 +30,9 @@ allOf:
             const: solomon,ssd1322
     then:
       properties:
-        width:
+        solomon,width:
           default: 480
-        height:
+        solomon,height:
           default: 128
 
   - if:
@@ -42,9 +42,9 @@ allOf:
             const: solomon,ssd1325
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 80
 
   - if:
@@ -54,9 +54,9 @@ allOf:
             const: solomon,ssd1327
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 128
 
 unevaluatedProperties: false
diff --git a/Bindings/display/solomon,ssd133x.yaml b/Bindings/display/solomon,ssd133x.yaml
new file mode 100644
index 0000000000..b7780038a3
--- /dev/null
+++ b/Bindings/display/solomon,ssd133x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD133x OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1331
+
+  solomon,width:
+    default: 96
+
+  solomon,height:
+    default: 64
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        oled@0 {
+            compatible = "solomon,ssd1331";
+            reg = <0x0>;
+            reset-gpios = <&gpio2 7>;
+            dc-gpios = <&gpio2 8>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git a/Bindings/display/ti/ti,am65x-dss.yaml b/Bindings/display/ti/ti,am65x-dss.yaml
index b6767ef0d2..55e3e490d0 100644
--- a/Bindings/display/ti/ti,am65x-dss.yaml
+++ b/Bindings/display/ti/ti,am65x-dss.yaml
@@ -37,6 +37,7 @@ properties:
       - description: OVR2 overlay manager for vp2
       - description: VP1 video port 1
       - description: VP2 video port 2
+      - description: common1 DSS register area
 
   reg-names:
     items:
@@ -47,6 +48,7 @@ properties:
       - const: ovr2
       - const: vp1
       - const: vp2
+      - const: common1
 
   clocks:
     items:
@@ -147,9 +149,10 @@ examples:
                     <0x04a07000 0x1000>, /* ovr1 */
                     <0x04a08000 0x1000>, /* ovr2 */
                     <0x04a0a000 0x1000>, /* vp1 */
-                    <0x04a0b000 0x1000>; /* vp2 */
+                    <0x04a0b000 0x1000>, /* vp2 */
+                    <0x04a01000 0x1000>; /* common1 */
             reg-names = "common", "vidl1", "vid",
-                    "ovr1", "ovr2", "vp1", "vp2";
+                    "ovr1", "ovr2", "vp1", "vp2", "common1";
             ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
             power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
             clocks =        <&k3_clks 67 1>,
diff --git a/Bindings/dma/allwinner,sun50i-a64-dma.yaml b/Bindings/dma/allwinner,sun50i-a64-dma.yaml
index ec2d7a789f..0f2501f72c 100644
--- a/Bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -28,6 +28,9 @@ properties:
       - items:
           - const: allwinner,sun8i-r40-dma
           - const: allwinner,sun50i-a64-dma
+      - items:
+          - const: allwinner,sun50i-h616-dma
+          - const: allwinner,sun50i-a100-dma
 
   reg:
     maxItems: 1
@@ -59,10 +62,11 @@ required:
 if:
   properties:
     compatible:
-      enum:
-        - allwinner,sun20i-d1-dma
-        - allwinner,sun50i-a100-dma
-        - allwinner,sun50i-h6-dma
+      contains:
+        enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
 
 then:
   properties:
diff --git a/Bindings/dma/fsl,edma.yaml b/Bindings/dma/fsl,edma.yaml
index 437db0c623..aa51d278cb 100644
--- a/Bindings/dma/fsl,edma.yaml
+++ b/Bindings/dma/fsl,edma.yaml
@@ -25,6 +25,7 @@ properties:
           - fsl,imx8qm-edma
           - fsl,imx93-edma3
           - fsl,imx93-edma4
+          - fsl,imx95-edma5
       - items:
           - const: fsl,ls1028a-edma
           - const: fsl,vf610-edma
@@ -83,6 +84,7 @@ allOf:
               - fsl,imx8qm-edma
               - fsl,imx93-edma3
               - fsl,imx93-edma4
+              - fsl,imx95-edma5
     then:
       properties:
         "#dma-cells":
diff --git a/Bindings/dma/fsl,imx-sdma.yaml b/Bindings/dma/fsl,imx-sdma.yaml
index b95dd8db5a..37135fa024 100644
--- a/Bindings/dma/fsl,imx-sdma.yaml
+++ b/Bindings/dma/fsl,imx-sdma.yaml
@@ -92,7 +92,8 @@ properties:
               description: needs firmware more than ver 2
           - Shared ASRC: 23
           - SAI: 24
-          - HDMI Audio: 25
+          - Multi SAI: 25
+          - HDMI Audio: 26
 
        The third cell: transfer priority ID
          enum:
diff --git a/Bindings/dma/marvell,mmp-dma.yaml b/Bindings/dma/marvell,mmp-dma.yaml
new file mode 100644
index 0000000000..d447d5207b
--- /dev/null
+++ b/Bindings/dma/marvell,mmp-dma.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP DMA controller
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description:
+  Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pdma-1.0
+      - marvell,adma-1.0
+      - marvell,pxa910-squ
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for the controller, may be shared or one per DMA channel
+    minItems: 1
+
+  asram:
+    description:
+      A phandle to the SRAM pool
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#dma-channels':
+    deprecated: true
+
+  '#dma-requests':
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#dma-cells'
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,pdma-1.0
+    then:
+      properties:
+        asram: false
+    else:
+      required:
+        - asram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@d4000000 {
+        compatible = "marvell,pdma-1.0";
+        reg = <0xd4000000 0x10000>;
+        interrupts = <47>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
diff --git a/Bindings/dma/mediatek,mt7622-hsdma.yaml b/Bindings/dma/mediatek,mt7622-hsdma.yaml
new file mode 100644
index 0000000000..3f1e120e40
--- /dev/null
+++ b/Bindings/dma/mediatek,mt7622-hsdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,mt7622-hsdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High-Speed DMA Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-hsdma
+      - mediatek,mt7623-hsdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hsdma
+
+  power-domains:
+    maxItems: 1
+
+  "#dma-cells":
+    description: Channel number
+    const: 1
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    dma-controller@1b007000 {
+        compatible = "mediatek,mt7623-hsdma";
+        reg = <0x1b007000 0x1000>;
+        interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+        clock-names = "hsdma";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+        #dma-cells = <1>;
+    };
diff --git a/Bindings/dma/mmp-dma.txt b/Bindings/dma/mmp-dma.txt
deleted file mode 100644
index ec18bf0a80..0000000000
--- a/Bindings/dma/mmp-dma.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MARVELL MMP DMA controller
-
-Marvell Peripheral DMA Controller
-Used platforms: pxa688, pxa910, pxa3xx, etc
-
-Required properties:
-- compatible: Should be "marvell,pdma-1.0"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for pdma device
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller (defaults
-  to 32 when not specified)
-- #dma-channels: deprecated
-- dma-requests: Number of DMA requestor lines supported by the controller
-  (defaults to 32 when not specified)
-- #dma-requests: deprecated
-
-"marvell,pdma-1.0"
-Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-
-Examples:
-
-/*
- * Each channel has specific irq
- * ICU parse out irq channel from ICU register,
- * while DMA controller may not able to distinguish the irq channel
- * Using this method, interrupt-parent is required as demuxer
- * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
- * 18~21 is ADMA irq
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-	      interrupt-parent = <&intcmux32>;
-	      dma-channels = <16>;
-      };
-
-/*
- * One irq for all channels
- * Dmaengine driver (DMA controller) distinguish irq channel via
- * parsing internal register
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <47>;
-	      dma-channels = <16>;
-      };
-
-
-Marvell Two Channel DMA Controller used specifically for audio
-Used platforms: pxa688, pxa910
-
-Required properties:
-- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for dma device
-
-"marvell,adma-1.0" used on pxa688
-"marvell,pxa910-squ" used on pxa910
-
-Examples:
-
-/* each channel has specific irq */
-adma0: dma-controller@d42a0800 {
-	      compatible = "marvell,adma-1.0";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <18 19>;
-	      interrupt-parent = <&intcmux32>;
-      };
-
-/* One irq for all channels */
-squ: dma-controller@d42a0800 {
-	      compatible = "marvell,pxa910-squ";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <46>;
-      };
diff --git a/Bindings/dma/mtk-hsdma.txt b/Bindings/dma/mtk-hsdma.txt
deleted file mode 100644
index 4bb317359d..0000000000
--- a/Bindings/dma/mtk-hsdma.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-MediaTek High-Speed DMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:	Must be one of
-		  "mediatek,mt7622-hsdma": for MT7622 SoC
-		  "mediatek,mt7623-hsdma": for MT7623 SoC
-- reg:		Should contain the register's base address and length.
-- interrupts:	Should contain a reference to the interrupt used by this
-		device.
-- clocks:	Should be the clock specifiers corresponding to the entry in
-		clock-names property.
-- clock-names:	Should contain "hsdma" entries.
-- power-domains: Phandle to the power domain that the device is part of
-- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
-		in dmas property of a client device represents the channel
-		number.
-Example:
-
-        hsdma: dma-controller@1b007000 {
-		compatible = "mediatek,mt7623-hsdma";
-		reg = <0 0x1b007000 0 0x1000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
-		clock-names = "hsdma";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		#dma-cells = <1>;
-	};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Bindings/dma/renesas,rcar-dmac.yaml b/Bindings/dma/renesas,rcar-dmac.yaml
index 03aa067b12..04fc4a99a7 100644
--- a/Bindings/dma/renesas,rcar-dmac.yaml
+++ b/Bindings/dma/renesas,rcar-dmac.yaml
@@ -46,6 +46,7 @@ properties:
               - renesas,dmac-r8a779a0     # R-Car V3U
               - renesas,dmac-r8a779f0     # R-Car S4-8
               - renesas,dmac-r8a779g0     # R-Car V4H
+              - renesas,dmac-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-dmac # R-Car Gen4
 
   reg: true
diff --git a/Bindings/dts-coding-style.rst b/Bindings/dts-coding-style.rst
index a9bdd2b59d..8a68331075 100644
--- a/Bindings/dts-coding-style.rst
+++ b/Bindings/dts-coding-style.rst
@@ -144,6 +144,8 @@ Example::
 		#dma-cells = <1>;
 		clocks = <&clock_controller 0>, <&clock_controller 1>;
 		clock-names = "bus", "host";
+		#address-cells = <1>;
+		#size-cells = <1>;
 		vendor,custom-property = <2>;
 		status = "disabled";
 
diff --git a/Bindings/eeprom/at24.yaml b/Bindings/eeprom/at24.yaml
index 1812ef31d5..3c36cd0510 100644
--- a/Bindings/eeprom/at24.yaml
+++ b/Bindings/eeprom/at24.yaml
@@ -68,14 +68,10 @@ properties:
                   pattern: cs16$
               - items:
                   pattern: c32$
-              - items:
-                  pattern: c32d-wl$
               - items:
                   pattern: cs32$
               - items:
                   pattern: c64$
-              - items:
-                  pattern: c64d-wl$
               - items:
                   pattern: cs64$
               - items:
@@ -136,6 +132,7 @@ properties:
               - renesas,r1ex24128
               - samsung,s524ad0xd1
           - const: atmel,24c128
+      - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st
 
   label:
     description: Descriptive name of the EEPROM.
diff --git a/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 8e584857dd..ab8f32c440 100644
--- a/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -26,6 +26,12 @@ properties:
       - description: For implementations complying for Versal.
         const: xlnx,versal-firmware
 
+      - description: For implementations complying for Versal NET.
+        items:
+          - enum:
+              - xlnx,versal-net-firmware
+          - const: xlnx,versal-firmware
+
   method:
     description: |
                  The method of calling the PM-API firmware layer.
@@ -41,7 +47,53 @@ properties:
   "#power-domain-cells":
     const: 1
 
-  versal_fpga:
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+  gpio:
+    $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+    description: The gpio node describes connect to PS_MODE pins via firmware
+      interface.
+    type: object
+
+  soc-nvmem:
+    $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+    description: The ZynqMP MPSoC provides access to the hardware related data
+      like SOC revision, IDCODE and specific purpose efuses.
+    type: object
+
+  pcap:
+    $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
+    description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+      configure the Programmable Logic (PL). The configuration uses the
+      firmware interface.
+    type: object
+
+  pinctrl:
+    $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+    description: The pinctrl node provides access to pinconfig and pincontrol
+      functionality available in firmware.
+    type: object
+
+  power-management:
+    $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml#
+    description: The zynqmp-power node describes the power management
+      configurations. It will control remote suspend/shutdown interfaces.
+    type: object
+
+  reset-controller:
+    $ref: /schemas/reset/xlnx,zynqmp-reset.yaml#
+    description: The reset-controller node describes connection to the reset
+      functionality via firmware interface.
+    type: object
+
+  versal-fpga:
     $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
     description: Compatible of the FPGA device.
     type: object
@@ -53,15 +105,6 @@ properties:
       vector.
     type: object
 
-  clock-controller:
-    $ref: /schemas/clock/xlnx,versal-clk.yaml#
-    description: The clock controller is a hardware block of Xilinx versal
-      clock tree. It reads required input clock frequencies from the devicetree
-      and acts as clock provider for all clock consumers of PS clocks.list of
-      clock specifiers which are external input clocks to the given clock
-      controller.
-    type: object
-
 required:
   - compatible
 
@@ -73,7 +116,38 @@ examples:
     firmware {
       zynqmp_firmware: zynqmp-firmware {
         #power-domain-cells = <1>;
+        soc-nvmem {
+          compatible = "xlnx,zynqmp-nvmem-fw";
+          nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+          };
+        };
+        gpio {
+          compatible = "xlnx,zynqmp-gpio-modepin";
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+        pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
         };
+        pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+        };
+        power-management {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+        reset-controller {
+          compatible = "xlnx,zynqmp-reset";
+          #reset-cells = <1>;
+        };
+      };
     };
 
     sata {
@@ -84,7 +158,7 @@ examples:
       compatible = "xlnx,versal-firmware";
       method = "smc";
 
-      versal_fpga: versal_fpga {
+      versal_fpga: versal-fpga {
         compatible = "xlnx,versal-fpga";
       };
 
diff --git a/Bindings/fpga/fpga-region.txt b/Bindings/fpga/fpga-region.txt
deleted file mode 100644
index 528df8a0e6..0000000000
--- a/Bindings/fpga/fpga-region.txt
+++ /dev/null
@@ -1,479 +0,0 @@
-FPGA Region Device Tree Binding
-
-Alan Tull 2016
-
- CONTENTS
- - Introduction
- - Terminology
- - Sequence
- - FPGA Region
- - Supported Use Models
- - Device Tree Examples
- - Constraints
-
-
-Introduction
-============
-
-FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
-the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
-control.
-
-This device tree binding document hits some of the high points of FPGA usage and
-attempts to include terminology used by both major FPGA manufacturers.  This
-document isn't a replacement for any manufacturers specifications for FPGA
-usage.
-
-
-Terminology
-===========
-
-Full Reconfiguration
- * The entire FPGA is programmed.
-
-Partial Reconfiguration (PR)
- * A section of an FPGA is reprogrammed while the rest of the FPGA is not
-   affected.
- * Not all FPGA's support PR.
-
-Partial Reconfiguration Region (PRR)
- * Also called a "reconfigurable partition"
- * A PRR is a specific section of an FPGA reserved for reconfiguration.
- * A base (or static) FPGA image may create a set of PRR's that later may
-   be independently reprogrammed many times.
- * The size and specific location of each PRR is fixed.
- * The connections at the edge of each PRR are fixed.  The image that is loaded
-   into a PRR must fit and must use a subset of the region's connections.
- * The busses within the FPGA are split such that each region gets its own
-   branch that may be gated independently.
-
-Persona
- * Also called a "partial bit stream"
- * An FPGA image that is designed to be loaded into a PRR.  There may be
-   any number of personas designed to fit into a PRR, but only one at at time
-   may be loaded.
- * A persona may create more regions.
-
-FPGA Bridge
- * FPGA Bridges gate bus signals between a host and FPGA.
- * FPGA Bridges should be disabled while the FPGA is being programmed to
-   prevent spurious signals on the cpu bus and to the soft logic.
- * FPGA bridges may be actual hardware or soft logic on an FPGA.
- * During Full Reconfiguration, hardware bridges between the host and FPGA
-   will be disabled.
- * During Partial Reconfiguration of a specific region, that region's bridge
-   will be used to gate the busses.  Traffic to other regions is not affected.
- * In some implementations, the FPGA Manager transparently handles gating the
-   buses, eliminating the need to show the hardware FPGA bridges in the
-   device tree.
- * An FPGA image may create a set of reprogrammable regions, each having its
-   own bridge and its own split of the busses in the FPGA.
-
-FPGA Manager
- * An FPGA Manager is a hardware block that programs an FPGA under the control
-   of a host processor.
-
-Base Image
- * Also called the "static image"
- * An FPGA image that is designed to do full reconfiguration of the FPGA.
- * A base image may set up a set of partial reconfiguration regions that may
-   later be reprogrammed.
-
-    ----------------       ----------------------------------
-    |  Host CPU    |       |             FPGA               |
-    |              |       |                                |
-    |          ----|       |       -----------    --------  |
-    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
-    |          | W |       |   |   -----------    --------  |
-    |          |   |       |   |                            |
-    |          | B |<=====>|<==|   -----------    --------  |
-    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
-    |          | I |       |   |   -----------    --------  |
-    |          | D |       |   |                            |
-    |          | G |       |   |   -----------    --------  |
-    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
-    |          ----|       |       -----------    --------  |
-    |              |       |                                |
-    ----------------       ----------------------------------
-
-Figure 1: An FPGA set up with a base image that created three regions.  Each
-region (PRR0-2) gets its own split of the busses that is independently gated by
-a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
-reprogrammed independently while the rest of the system continues to function.
-
-
-Sequence
-========
-
-When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
-do the following:
-
- 1. Disable appropriate FPGA bridges.
- 2. Program the FPGA using the FPGA manager.
- 3. Enable the FPGA bridges.
- 4. The Device Tree overlay is accepted into the live tree.
- 5. Child devices are populated.
-
-When the overlay is removed, the child nodes will be removed and the FPGA Region
-will disable the bridges.
-
-
-FPGA Region
-===========
-
-FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
-Region brings together the elements needed to program on a running system and
-add the child devices:
-
- * FPGA Manager
- * FPGA Bridges
- * image-specific information needed to to the programming.
- * child nodes
-
-The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
-FPGA while an operating system is running.
-
-An FPGA Region that exists in the live Device Tree reflects the current state.
-If the live tree shows a "firmware-name" property or child nodes under an FPGA
-Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
-and adds the "firmware-name" property is taken as a request to reprogram the
-FPGA.  After reprogramming is successful, the overlay is accepted into the live
-tree.
-
-The base FPGA Region in the device tree represents the FPGA and supports full
-reconfiguration.  It must include a phandle to an FPGA Manager.  The base
-FPGA region will be the child of one of the hardware bridges (the bridge that
-allows register access) between the cpu and the FPGA.  If there are more than
-one bridge to control during FPGA programming, the region will also contain a
-list of phandles to the additional hardware FPGA Bridges.
-
-For partial reconfiguration (PR), each PR region will have an FPGA Region.
-These FPGA regions are children of FPGA bridges which are then children of the
-base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
-this.
-
-If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
-Manager specified by its ancestor FPGA Region.  This supports both the case
-where the same FPGA Manager is used for all of an FPGA as well the case where
-a different FPGA Manager is used for each region.
-
-FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
-shutting down bridges that are upstream from the other active regions while one
-region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
-hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
-within the static image of the FPGA.
-
-Required properties:
-- compatible : should contain "fpga-region"
-- fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
-	inherit this property from their ancestor regions.  An fpga-mgr property
-	in a region will override any inherited FPGA manager.
-- #address-cells, #size-cells, ranges : must be present to handle address space
-	mapping for child nodes.
-
-Optional properties:
-- firmware-name : should contain the name of an FPGA image file located on the
-	firmware search path.  If this property shows up in a live device tree
-	it indicates that the FPGA has already been programmed with this image.
-	If this property is in an overlay targeting an FPGA region, it is a
-	request to program the FPGA with that image.
-- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
-	controlled during FPGA programming along with the parent FPGA bridge.
-	This property is optional if the FPGA Manager handles the bridges.
-        If the fpga-region is  the child of an fpga-bridge, the list should not
-        contain the parent bridge.
-- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
-	otherwise full reconfiguration is done.
-- external-fpga-config : boolean, set if the FPGA has already been configured
-	prior to OS boot up.
-- encrypted-fpga-config : boolean, set if the bitstream is encrypted
-- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become enabled after the region has been
-	programmed.
-- region-freeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become disabled before the region has been
-	programmed.
-- config-complete-timeout-us : The maximum time in microseconds time for the
-	FPGA to go to operating mode after the region has been programmed.
-- child nodes : devices in the FPGA after programming.
-
-In the example below, when an overlay is applied targeting fpga-region0,
-fpga_mgr is used to program the FPGA.  Two bridges are controlled during
-programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
-the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
-fpga-bridges property.  During programming, these bridges are disabled, the
-firmware specified in the overlay is loaded to the FPGA using the FPGA manager
-specified in the region.  If FPGA programming succeeds, the bridges are
-reenabled and the overlay makes it into the live device tree.  The child devices
-are then populated.  If FPGA programming fails, the bridges are left disabled
-and the overlay is rejected.  The overlay's ranges property maps the lwhps
-bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
-the two child devices.
-
-Example:
-Base tree contains:
-
-	fpga_mgr: fpga-mgr@ff706000 {
-		compatible = "altr,socfpga-fpga-mgr";
-		reg = <0xff706000 0x1000
-		       0xffb90000 0x20>;
-		interrupts = <0 175 4>;
-	};
-
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fpga_region0: fpga-region0 {
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-	};
-
-Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_system.rbf";
-	fpga-bridges = <&fpga_bridge1>;
-	ranges = <0x20000 0xff200000 0x100000>,
-		 <0x0 0xc0000000 0x20000000>;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		altr,ngpio = <4>;
-		#gpio-cells = <2>;
-		clocks = <2>;
-		gpio-controller;
-	};
-
-	onchip-memory {
-		device_type = "memory";
-		compatible = "altr,onchipmem-15.1";
-		reg = <0x0 0x10000>;
-	};
-};
-
-
-Supported Use Models
-====================
-
-In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
-a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
-uses are specific to an FPGA device.
-
- * No FPGA Bridges
-   In this case, the FPGA Manager which programs the FPGA also handles the
-   bridges behind the scenes.  No FPGA Bridge devices are needed for full
-   reconfiguration.
-
- * Full reconfiguration with hardware bridges
-   In this case, there are hardware bridges between the processor and FPGA that
-   need to be controlled during full reconfiguration.  Before the overlay is
-   applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
-   FPGA Region.  The FPGA Region is the child of the bridge that allows
-   register access to the FPGA.  Additional bridges may be listed in a
-   fpga-bridges property in the FPGA region or in the device tree overlay.
-
- * Partial reconfiguration with bridges in the FPGA
-   In this case, the FPGA will have one or more PRR's that may be programmed
-   separately while the rest of the FPGA can remain active.  To manage this,
-   bridges need to exist in the FPGA that can gate the buses going to each FPGA
-   region while the buses are enabled for other sections.  Before any partial
-   reconfiguration can be done, a base FPGA image must be loaded which includes
-   PRR's with FPGA bridges.  The device tree should have an FPGA region for each
-   PRR.
-
-Device Tree Examples
-====================
-
-The intention of this section is to give some simple examples, focusing on
-the placement of the elements detailed above, especially:
- * FPGA Manager
- * FPGA Bridges
- * FPGA Region
- * ranges
- * target-path or target
-
-For the purposes of this section, I'm dividing the Device Tree into two parts,
-each with its own requirements.  The two parts are:
- * The live DT prior to the overlay being added
- * The DT overlay
-
-The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
-Bridges.  The FPGA Region's "fpga-mgr" property specifies the manager by phandle
-to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
-Region, the parent's FPGA Manager is used.  If FPGA Bridges need to be involved,
-they are specified in the FPGA Region by the "fpga-bridges" property.  During
-FPGA programming, the FPGA Region will disable the bridges that are in its
-"fpga-bridges" list and will re-enable them after FPGA programming has
-succeeded.
-
-The Device Tree Overlay will contain:
- * "target-path" or "target"
-   The insertion point where the contents of the overlay will go into the
-   live tree.  target-path is a full path, while target is a phandle.
- * "ranges"
-    The address space mapping from processor to FPGA bus(ses).
- * "firmware-name"
-   Specifies the name of the FPGA image file on the firmware search
-   path.  The search path is described in the firmware class documentation.
- * "partial-fpga-config"
-   This binding is a boolean and should be present if partial reconfiguration
-   is to be done.
- * child nodes corresponding to hardware that will be loaded in this region of
-   the FPGA.
-
-Device Tree Example: Full Reconfiguration without Bridges
-=========================================================
-
-Live Device Tree contains:
-	fpga_mgr0: fpga-mgr@f8007000 {
-		compatible = "xlnx,zynq-devcfg-1.0";
-		reg = <0xf8007000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 8 4>;
-		clocks = <&clkc 12>;
-		clock-names = "ref_clk";
-		syscon = <&slcr>;
-	};
-
-	fpga_region0: fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&fpga_mgr0>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-	};
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "zynq-gpio.bin";
-
-	gpio1: gpio@40000000 {
-		compatible = "xlnx,xps-gpio-1.00.a";
-		reg = <0x40000000 0x10000>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-		xlnx,gpio-width= <0x6>;
-	};
-};
-
-Device Tree Example: Full Reconfiguration to add PRR's
-======================================================
-
-The base FPGA Region is specified similar to the first example above.
-
-This example programs the FPGA to have two regions that can later be partially
-configured.  Each region has its own bridge in the FPGA fabric.
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "base.rbf";
-
-	fpga-bridge@4400 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4400 0x10>;
-
-		fpga_region1: fpga-region1 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-
-	fpga-bridge@4420 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4420 0x10>;
-
-		fpga_region2: fpga-region2 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-};
-
-Device Tree Example: Partial Reconfiguration
-============================================
-
-This example reprograms one of the PRR's set up in the previous example.
-
-The sequence that occurs when this overlay is similar to the above, the only
-differences are that the FPGA is partially reconfigured due to the
-"partial-fpga-config" boolean and the only bridge that is controlled during
-programming is the FPGA based bridge of fpga_region1.
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region1 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_image2.rbf";
-	partial-fpga-config;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		clocks = <0x2>;
-		altr,ngpio = <0x4>;
-		#gpio-cells = <0x2>;
-		gpio-controller;
-	};
-};
-
-Constraints
-===========
-
-It is beyond the scope of this document to fully describe all the FPGA design
-constraints required to make partial reconfiguration work[1] [2] [3], but a few
-deserve quick mention.
-
-A persona must have boundary connections that line up with those of the partition
-or region it is designed to go into.
-
-During programming, transactions through those connections must be stopped and
-the connections must be held at a fixed logic level.  This can be achieved by
-FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
-
---
-[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
-[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
-[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git a/Bindings/fpga/fpga-region.yaml b/Bindings/fpga/fpga-region.yaml
new file mode 100644
index 0000000000..77554885a6
--- /dev/null
+++ b/Bindings/fpga/fpga-region.yaml
@@ -0,0 +1,358 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Region
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  CONTENTS
+   - Introduction
+   - Terminology
+   - Sequence
+   - FPGA Region
+   - Supported Use Models
+   - Constraints
+
+
+  Introduction
+  ============
+
+  FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+  the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
+  control.
+
+  The documentation hits some of the high points of FPGA usage and
+  attempts to include terminology used by both major FPGA manufacturers.  This
+  document isn't a replacement for any manufacturers specifications for FPGA
+  usage.
+
+
+  Terminology
+  ===========
+
+  Full Reconfiguration
+   * The entire FPGA is programmed.
+
+  Partial Reconfiguration (PR)
+   * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+     affected.
+   * Not all FPGA's support PR.
+
+  Partial Reconfiguration Region (PRR)
+   * Also called a "reconfigurable partition"
+   * A PRR is a specific section of an FPGA reserved for reconfiguration.
+   * A base (or static) FPGA image may create a set of PRR's that later may
+     be independently reprogrammed many times.
+   * The size and specific location of each PRR is fixed.
+   * The connections at the edge of each PRR are fixed.  The image that is loaded
+     into a PRR must fit and must use a subset of the region's connections.
+   * The busses within the FPGA are split such that each region gets its own
+     branch that may be gated independently.
+
+  Persona
+   * Also called a "partial bit stream"
+   * An FPGA image that is designed to be loaded into a PRR.  There may be
+     any number of personas designed to fit into a PRR, but only one at a time
+     may be loaded.
+   * A persona may create more regions.
+
+  FPGA Bridge
+   * FPGA Bridges gate bus signals between a host and FPGA.
+   * FPGA Bridges should be disabled while the FPGA is being programmed to
+     prevent spurious signals on the cpu bus and to the soft logic.
+   * FPGA bridges may be actual hardware or soft logic on an FPGA.
+   * During Full Reconfiguration, hardware bridges between the host and FPGA
+     will be disabled.
+   * During Partial Reconfiguration of a specific region, that region's bridge
+     will be used to gate the busses.  Traffic to other regions is not affected.
+   * In some implementations, the FPGA Manager transparently handles gating the
+     buses, eliminating the need to show the hardware FPGA bridges in the
+     device tree.
+   * An FPGA image may create a set of reprogrammable regions, each having its
+     own bridge and its own split of the busses in the FPGA.
+
+  FPGA Manager
+   * An FPGA Manager is a hardware block that programs an FPGA under the control
+     of a host processor.
+
+  Base Image
+   * Also called the "static image"
+   * An FPGA image that is designed to do full reconfiguration of the FPGA.
+   * A base image may set up a set of partial reconfiguration regions that may
+     later be reprogrammed.
+
+      ----------------       ----------------------------------
+      |  Host CPU    |       |             FPGA               |
+      |              |       |                                |
+      |          ----|       |       -----------    --------  |
+      |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
+      |          | W |       |   |   -----------    --------  |
+      |          |   |       |   |                            |
+      |          | B |<=====>|<==|   -----------    --------  |
+      |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
+      |          | I |       |   |   -----------    --------  |
+      |          | D |       |   |                            |
+      |          | G |       |   |   -----------    --------  |
+      |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
+      |          ----|       |       -----------    --------  |
+      |              |       |                                |
+      ----------------       ----------------------------------
+
+  Figure 1: An FPGA set up with a base image that created three regions.  Each
+  region (PRR0-2) gets its own split of the busses that is independently gated by
+  a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
+  reprogrammed independently while the rest of the system continues to function.
+
+
+  Sequence
+  ========
+
+  When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
+  do the following:
+
+   1. Disable appropriate FPGA bridges.
+   2. Program the FPGA using the FPGA manager.
+   3. Enable the FPGA bridges.
+   4. The Device Tree overlay is accepted into the live tree.
+   5. Child devices are populated.
+
+  When the overlay is removed, the child nodes will be removed and the FPGA Region
+  will disable the bridges.
+
+
+  FPGA Region
+  ===========
+
+  FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
+  Region brings together the elements needed to program on a running system and
+  add the child devices:
+
+   * FPGA Manager
+   * FPGA Bridges
+   * image-specific information needed to the programming.
+   * child nodes
+
+  The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+  FPGA while an operating system is running.
+
+  An FPGA Region that exists in the live Device Tree reflects the current state.
+  If the live tree shows a "firmware-name" property or child nodes under an FPGA
+  Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
+  and adds the "firmware-name" property is taken as a request to reprogram the
+  FPGA.  After reprogramming is successful, the overlay is accepted into the live
+  tree.
+
+  The base FPGA Region in the device tree represents the FPGA and supports full
+  reconfiguration.  It must include a phandle to an FPGA Manager.  The base
+  FPGA region will be the child of one of the hardware bridges (the bridge that
+  allows register access) between the cpu and the FPGA.  If there are more than
+  one bridge to control during FPGA programming, the region will also contain a
+  list of phandles to the additional hardware FPGA Bridges.
+
+  For partial reconfiguration (PR), each PR region will have an FPGA Region.
+  These FPGA regions are children of FPGA bridges which are then children of the
+  base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
+  this.
+
+  If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
+  Manager specified by its ancestor FPGA Region.  This supports both the case
+  where the same FPGA Manager is used for all of an FPGA as well the case where
+  a different FPGA Manager is used for each region.
+
+  FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
+  shutting down bridges that are upstream from the other active regions while one
+  region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
+  hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
+  within the static image of the FPGA.
+
+
+  Supported Use Models
+  ====================
+
+  In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+  a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
+  uses are specific to an FPGA device.
+
+   * No FPGA Bridges
+     In this case, the FPGA Manager which programs the FPGA also handles the
+     bridges behind the scenes.  No FPGA Bridge devices are needed for full
+     reconfiguration.
+
+   * Full reconfiguration with hardware bridges
+     In this case, there are hardware bridges between the processor and FPGA that
+     need to be controlled during full reconfiguration.  Before the overlay is
+     applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+     FPGA Region.  The FPGA Region is the child of the bridge that allows
+     register access to the FPGA.  Additional bridges may be listed in a
+     fpga-bridges property in the FPGA region or in the device tree overlay.
+
+   * Partial reconfiguration with bridges in the FPGA
+     In this case, the FPGA will have one or more PRR's that may be programmed
+     separately while the rest of the FPGA can remain active.  To manage this,
+     bridges need to exist in the FPGA that can gate the buses going to each FPGA
+     region while the buses are enabled for other sections.  Before any partial
+     reconfiguration can be done, a base FPGA image must be loaded which includes
+     PRR's with FPGA bridges.  The device tree should have an FPGA region for each
+     PRR.
+
+  Constraints
+  ===========
+
+  It is beyond the scope of this document to fully describe all the FPGA design
+  constraints required to make partial reconfiguration work[1] [2] [3], but a few
+  deserve quick mention.
+
+  A persona must have boundary connections that line up with those of the partition
+  or region it is designed to go into.
+
+  During programming, transactions through those connections must be stopped and
+  the connections must be held at a fixed logic level.  This can be achieved by
+  FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+  --
+  [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+  [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+  [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
+
+properties:
+  $nodename:
+    pattern: "^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  compatible:
+    const: fpga-region
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+  "#address-cells": true
+  "#size-cells": true
+
+  config-complete-timeout-us:
+    description:
+      The maximum time in microseconds time for the FPGA to go to operating
+      mode after the region has been programmed.
+
+  encrypted-fpga-config:
+    type: boolean
+    description:
+      Set if the bitstream is encrypted.
+
+  external-fpga-config:
+    type: boolean
+    description:
+      Set if the FPGA has already been configured prior to OS boot up.
+
+  firmware-name:
+    maxItems: 1
+    description:
+      Should contain the name of an FPGA image file located on the firmware
+      search path. If this property shows up in a live device tree it indicates
+      that the FPGA has already been programmed with this image.
+      If this property is in an overlay targeting an FPGA region, it is
+      a request to program the FPGA with that image.
+
+  fpga-bridges:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles to FPGA Bridges that must be
+      controlled during FPGA programming along with the parent FPGA bridge.
+      This property is optional if the FPGA Manager handles the bridges.
+      If the fpga-region is  the child of an fpga-bridge, the list should not
+      contain the parent bridge.
+
+  fpga-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should contain a phandle to an FPGA Manager.  Child FPGA Regions
+      inherit this property from their ancestor regions.  An fpga-mgr property
+      in a region will override any inherited FPGA manager.
+
+  partial-fpga-config:
+    type: boolean
+    description:
+      Set if partial reconfiguration is to be done, otherwise full
+      reconfiguration is done.
+
+  region-freeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become disabled before the region has been programmed.
+
+  region-unfreeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become enabled after the region has been programmed.
+
+required:
+  - compatible
+  - fpga-mgr
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /*
+     * Full Reconfiguration without Bridges with DT overlay
+     */
+    fpga_region0: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr0>;
+      ranges = <0x10000000 0x20000000 0x10000000>;
+
+      /* DT Overlay contains: &fpga_region0 */
+      firmware-name = "zynq-gpio.bin";
+      gpio@40000000 {
+        compatible = "xlnx,xps-gpio-1.00.a";
+        reg = <0x40000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+      };
+    };
+
+  - |
+    /*
+     * Partial reconfiguration with bridge
+     */
+    fpga_region1: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      ranges;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr1>;
+      fpga-bridges = <&fpga_bridge1>;
+      partial-fpga-config;
+
+      /* DT Overlay contains: &fpga_region1 */
+      firmware-name = "zynq-gpio-partial.bin";
+      clk: clock {
+        compatible = "fixed-factor-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        clock-div = <2>;
+        clock-mult = <1>;
+      };
+      axi {
+        compatible = "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        gpio@40000000 {
+          compatible = "xlnx,xps-gpio-1.00.a";
+          reg = <0x40000000 0x10000>;
+          #gpio-cells = <2>;
+          gpio-controller;
+          clocks = <&clk>;
+        };
+      };
+    };
diff --git a/Bindings/fpga/xlnx,versal-fpga.yaml b/Bindings/fpga/xlnx,versal-fpga.yaml
index 26f18834ca..80833462f6 100644
--- a/Bindings/fpga/xlnx,versal-fpga.yaml
+++ b/Bindings/fpga/xlnx,versal-fpga.yaml
@@ -26,7 +26,7 @@ additionalProperties: false
 
 examples:
   - |
-    versal_fpga: versal_fpga {
+    versal_fpga: versal-fpga {
          compatible = "xlnx,versal-fpga";
     };
 
diff --git a/Bindings/gpio/aspeed,ast2400-gpio.yaml b/Bindings/gpio/aspeed,ast2400-gpio.yaml
new file mode 100644
index 0000000000..cf11aa7ec8
--- /dev/null
+++ b/Bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed GPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-gpio
+      - aspeed,ast2500-gpio
+      - aspeed,ast2600-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: The clock to use for debounce timings
+
+  gpio-controller: true
+  gpio-line-names:
+    minItems: 36
+    maxItems: 232
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ngpios:
+    minimum: 36
+    maximum: 232
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2400-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 220
+          maxItems: 220
+        ngpios:
+          const: 220
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2500-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 232
+          maxItems: 232
+        ngpios:
+          const: 232
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 208
+        ngpios:
+          enum: [ 36, 208 ]
+      required:
+        - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1e780000 {
+        compatible = "aspeed,ast2400-gpio";
+        reg = <0x1e780000 0x1000>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+  - |
+    gpio: gpio@1e780000 {
+        compatible = "aspeed,ast2500-gpio";
+        reg = <0x1e780000 0x200>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 232>;
+    };
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio@1e780000 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780000 0x400>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 208>;
+        ngpios = <208>;
+    };
+    gpio1: gpio@1e780800 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780800 0x800>;
+        clocks = <&syscon ASPEED_CLK_APB1>;
+        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 208 36>;
+        ngpios = <36>;
+    };
diff --git a/Bindings/gpio/gateworks,pld-gpio.txt b/Bindings/gpio/gateworks,pld-gpio.txt
index 6e81f8b755..d543fd1b8b 100644
--- a/Bindings/gpio/gateworks,pld-gpio.txt
+++ b/Bindings/gpio/gateworks,pld-gpio.txt
@@ -1,7 +1,6 @@
 Gateworks PLD GPIO controller bindings
 
-The GPIO controller should be a child node on an I2C bus,
-see: i2c/i2c.txt for details.
+The GPIO controller should be a child node on an I2C bus.
 
 Required properties:
 - compatible: Should be "gateworks,pld-gpio"
diff --git a/Bindings/gpio/gpio-aspeed.txt b/Bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc3a7..0000000000
--- a/Bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio@1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};
diff --git a/Bindings/gpio/gpio-mvebu.yaml b/Bindings/gpio/gpio-mvebu.yaml
index f1bd1e6b2e..33d4e47165 100644
--- a/Bindings/gpio/gpio-mvebu.yaml
+++ b/Bindings/gpio/gpio-mvebu.yaml
@@ -115,7 +115,7 @@ allOf:
       required:
         - reg
 
-unevaluatedProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/gpio/gpio-nmk.txt b/Bindings/gpio/gpio-nmk.txt
deleted file mode 100644
index 8315ac7780..0000000000
--- a/Bindings/gpio/gpio-nmk.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Nomadik GPIO controller
-
-Required properties:
-- compatible            : Should be "st,nomadik-gpio".
-- reg                   : Physical base address and length of the controller's registers.
-- interrupts            : The interrupt outputs from the controller.
-- #gpio-cells           : Should be two:
-                            The first cell is the pin number.
-                            The second cell is used to specify optional parameters:
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered.
-                                  2 = high-to-low edge triggered.
-                                  4 = active high level-sensitive.
-                                  8 = active low level-sensitive.
-- gpio-controller       : Marks the device node as a GPIO controller.
-- interrupt-controller  : Marks the device node as an interrupt controller.
-- gpio-bank             : Specifies which bank a controller owns.
-- st,supports-sleepmode : Specifies whether controller can sleep or not
-
-Example:
-
-                gpio1: gpio@8012e080 {
-                        compatible = "st,nomadik-gpio";
-                        reg =  <0x8012e080 0x80>;
-                        interrupts = <0 120 0x4>;
-                        #gpio-cells = <2>;
-                        gpio-controller;
-                        interrupt-controller;
-                        st,supports-sleepmode;
-                        gpio-bank = <1>;
-                };
diff --git a/Bindings/gpio/gpio-pca9570.yaml b/Bindings/gpio/gpio-pca9570.yaml
index 452f8972a9..6f73961001 100644
--- a/Bindings/gpio/gpio-pca9570.yaml
+++ b/Bindings/gpio/gpio-pca9570.yaml
@@ -28,6 +28,9 @@ properties:
     minItems: 4
     maxItems: 8
 
+  label:
+    description: A descriptive name for this device.
+
 required:
   - compatible
   - reg
diff --git a/Bindings/gpio/mrvl-gpio.yaml b/Bindings/gpio/mrvl-gpio.yaml
index 9cf6137dd5..65155bb701 100644
--- a/Bindings/gpio/mrvl-gpio.yaml
+++ b/Bindings/gpio/mrvl-gpio.yaml
@@ -9,7 +9,7 @@ title: Marvell PXA GPIO controller
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - if:
diff --git a/Bindings/gpio/renesas,rcar-gpio.yaml b/Bindings/gpio/renesas,rcar-gpio.yaml
index aa424e2b95..cc7a950a60 100644
--- a/Bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Bindings/gpio/renesas,rcar-gpio.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,gpio-r8a779a0     # R-Car V3U
               - renesas,gpio-r8a779f0     # R-Car S4-8
               - renesas,gpio-r8a779g0     # R-Car V4H
+              - renesas,gpio-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
diff --git a/Bindings/gpio/st,nomadik-gpio.yaml b/Bindings/gpio/st,nomadik-gpio.yaml
new file mode 100644
index 0000000000..38d37d8f72
--- /dev/null
+++ b/Bindings/gpio/st,nomadik-gpio.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nomadik GPIO controller
+
+description:
+  The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also
+  been called ST STA2X11. On the Nomadik platform, this driver is intertwined
+  with pinctrl-nomadik.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-bank:
+    description: System-wide GPIO bank index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st,supports-sleepmode:
+    description: Whether the controller can sleep or not.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  clocks:
+    maxItems: 1
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - interrupt-controller
+  - gpio-bank
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-gpio
+    then:
+      properties:
+        st,supports-sleepmode: false
+
+examples:
+  - |
+    gpio@8012e080 {
+        compatible = "st,nomadik-gpio";
+        reg =  <0x8012e080 0x80>;
+        interrupts = <0 120 0x4>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        st,supports-sleepmode;
+        gpio-bank = <1>;
+    };
diff --git a/Bindings/gpu/img,powervr.yaml b/Bindings/gpu/img,powervr-rogue.yaml
similarity index 91%
rename from Bindings/gpu/img,powervr.yaml
rename to Bindings/gpu/img,powervr-rogue.yaml
index a13298f1a1..256e252f80 100644
--- a/Bindings/gpu/img,powervr.yaml
+++ b/Bindings/gpu/img,powervr-rogue.yaml
@@ -2,10 +2,10 @@
 # Copyright (c) 2023 Imagination Technologies Ltd.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/gpu/img,powervr.yaml#
+$id: http://devicetree.org/schemas/gpu/img,powervr-rogue.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Imagination Technologies PowerVR and IMG GPU
+title: Imagination Technologies PowerVR and IMG Rogue GPUs
 
 maintainers:
   - Frank Binns <frank.binns@imgtec.com>
diff --git a/Bindings/gpu/img,powervr-sgx.yaml b/Bindings/gpu/img,powervr-sgx.yaml
new file mode 100644
index 0000000000..f5898b0438
--- /dev/null
+++ b/Bindings/gpu/img,powervr-sgx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+# Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr-sgx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR SGX GPUs
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,omap3430-gpu # Rev 121
+              - ti,omap3630-gpu # Rev 125
+          - const: img,powervr-sgx530
+      - items:
+          - enum:
+              - ingenic,jz4780-gpu # Rev 130
+              - ti,omap4430-gpu # Rev 120
+          - const: img,powervr-sgx540
+      - items:
+          - enum:
+              - allwinner,sun6i-a31-gpu # MP2 Rev 115
+              - ti,omap4470-gpu # MP1 Rev 112
+              - ti,omap5432-gpu # MP2 Rev 105
+              - ti,am5728-gpu # MP2 Rev 116
+              - ti,am6548-gpu # MP1 Rev 117
+          - const: img,powervr-sgx544
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am6548-gpu
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-gpu
+              - ingenic,jz4780-gpu
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-gpu
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ingenic,jz4780-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@7000000 {
+        compatible = "ti,am6548-gpu", "img,powervr-sgx544";
+        reg = <0x7000000 0x10000>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@1c40000 {
+        compatible = "allwinner,sun6i-a31-gpu", "img,powervr-sgx544";
+        reg = <0x01c40000 0x10000>;
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu 1>, <&ccu 2>;
+        clock-names = "core", "mem";
+    };
diff --git a/Bindings/hwmon/adi,adm1177.yaml b/Bindings/hwmon/adi,adm1177.yaml
index 2e45364d05..be7e9e91a3 100644
--- a/Bindings/hwmon/adi,adm1177.yaml
+++ b/Bindings/hwmon/adi,adm1177.yaml
@@ -46,7 +46,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/adi,adm1275.yaml b/Bindings/hwmon/adi,adm1275.yaml
index ab87f51c5a..b680612949 100644
--- a/Bindings/hwmon/adi,adm1275.yaml
+++ b/Bindings/hwmon/adi,adm1275.yaml
@@ -33,10 +33,6 @@ properties:
   reg:
     maxItems: 1
 
-  shunt-resistor-micro-ohms:
-    description:
-      Shunt resistor value in micro-Ohm.
-
   adi,volt-curr-sample-average:
     description: |
       Number of samples to be used to report voltage and current values.
@@ -50,6 +46,7 @@ properties:
     enum: [1, 2, 4, 8, 16, 32, 64, 128]
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +104,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/adi,ltc2945.yaml b/Bindings/hwmon/adi,ltc2945.yaml
index 5cb66e97e8..6401b0a9af 100644
--- a/Bindings/hwmon/adi,ltc2945.yaml
+++ b/Bindings/hwmon/adi,ltc2945.yaml
@@ -31,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/adi,ltc4282.yaml b/Bindings/hwmon/adi,ltc4282.yaml
new file mode 100644
index 0000000000..4854b95a93
--- /dev/null
+++ b/Bindings/hwmon/adi,ltc4282.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc4282
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,rsense-nano-ohms:
+    description: Value of the sense resistor.
+
+  adi,vin-mode-microvolt:
+    description:
+      Selects operating range for the Undervoltage, Overvoltage and Foldback
+      pins. Also for the ADC. Should be set to the nominal input voltage.
+    enum: [3300000, 5000000, 12000000, 24000000]
+    default: 12000000
+
+  adi,fet-bad-timeout-ms:
+    description:
+      From the moment a FET bad conditions is present, this property selects the
+      wait time/timeout for a FET-bad fault to be signaled. Setting this to 0,
+      disables FET bad faults to be reported.
+    default: 255
+    maximum: 255
+
+  adi,overvoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,undervoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,current-limit-sense-microvolt:
+    description:
+      The current limit sense voltage of the chip is adjustable between
+      12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current
+      on the load.
+    enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375]
+    default: 25000
+
+  adi,overcurrent-retry:
+    description:
+      If set, enables the chip to auto-retry 256 timer cycles after an
+      Overcurrent fault.
+    type: boolean
+
+  adi,overvoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Overvoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,undervoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Undervoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,fault-log-enable:
+    description:
+      If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written
+      to the EEPROM when a fault bit transitions high and hence, will be
+      available after a power cycle (the chip loads the contents of
+      the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot).
+    type: boolean
+
+  adi,gpio1-mode:
+    description: Defines the function of the Pin. It can indicate that power is
+      good (PULL the pin low when power is not good) or that power is bad (Go
+      into high-z when power is not good).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [power_bad, power_good]
+    default: power_good
+
+  adi,gpio2-mode:
+    description: Defines the function of the Pin. It can be set as the input for
+      the ADC or indicating that the MOSFET is in stress (dissipating power).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [adc_input, stress_fet]
+    default: adc_input
+
+  adi,gpio3-monitor-enable:
+    description: If set, gpio3 is set as input for the ADC instead of gpio2.
+    type: boolean
+
+allOf:
+  - if:
+      required:
+        - adi,gpio3-monitor-enable
+    then:
+      properties:
+        adi,gpio2-mode:
+          const: stress_fet
+
+required:
+  - compatible
+  - reg
+  - adi,rsense-nano-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@50 {
+            compatible = "adi,ltc4282";
+            reg = <0x50>;
+            adi,rsense-nano-ohms = <500>;
+
+            adi,gpio1-mode = "power_good";
+            adi,gpio2-mode = "adc_input";
+        };
+    };
+...
diff --git a/Bindings/hwmon/amphenol,chipcap2.yaml b/Bindings/hwmon/amphenol,chipcap2.yaml
new file mode 100644
index 0000000000..17351fdbef
--- /dev/null
+++ b/Bindings/hwmon/amphenol,chipcap2.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipCap 2 humidity and temperature iio sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  Relative humidity and temperature sensor on I2C bus.
+
+  Datasheets:
+    https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+properties:
+  compatible:
+    oneOf:
+      - const: amphenol,cc2d23
+      - items:
+          - enum:
+              - amphenol,cc2d23s
+              - amphenol,cc2d25
+              - amphenol,cc2d25s
+              - amphenol,cc2d33
+              - amphenol,cc2d33s
+              - amphenol,cc2d35
+              - amphenol,cc2d35s
+          - const: amphenol,cc2d23
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: measurement ready indicator
+      - description: low humidity alarm
+      - description: high humidity alarm
+
+  interrupt-names:
+    items:
+      - const: ready
+      - const: low
+      - const: high
+
+  vdd-supply:
+    description:
+      Dedicated, controllable supply-regulator to reset the device and
+      enter in command mode.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@28 {
+            compatible = "amphenol,cc2d23s", "amphenol,cc2d23";
+            reg = <0x28>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>,
+                         <5 IRQ_TYPE_EDGE_RISING>,
+                         <6 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "ready", "low", "high";
+            vdd-supply = <&reg_vdd>;
+        };
+    };
diff --git a/Bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Bindings/hwmon/aspeed,g6-pwm-tach.yaml
new file mode 100644
index 0000000000..9e5ed901ae
--- /dev/null
+++ b/Bindings/hwmon/aspeed,g6-pwm-tach.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2023 Aspeed, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED G6 PWM and Fan Tach controller
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  The ASPEED PWM controller can support up to 16 PWM outputs.
+  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
+  They are independent hardware blocks, which are different from the
+  previous version of the ASPEED chip.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-pwm-tach
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - tach-ch
+
+required:
+  - reg
+  - clocks
+  - resets
+  - "#pwm-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    pwm_tach: pwm-tach-controller@1e610000 {
+      compatible = "aspeed,ast2600-pwm-tach";
+      reg = <0x1e610000 0x100>;
+      clocks = <&syscon ASPEED_CLK_AHB>;
+      resets = <&syscon ASPEED_RESET_PWM>;
+      #pwm-cells = <3>;
+
+      fan-0 {
+        tach-ch = /bits/ 8 <0x0>;
+        pwms = <&pwm_tach 0 40000 0>;
+      };
+
+      fan-1 {
+        tach-ch = /bits/ 8 <0x1 0x2>;
+        pwms = <&pwm_tach 1 40000 0>;
+      };
+    };
diff --git a/Bindings/hwmon/fan-common.yaml b/Bindings/hwmon/fan-common.yaml
new file mode 100644
index 0000000000..0fb7380816
--- /dev/null
+++ b/Bindings/hwmon/fan-common.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+properties:
+  max-rpm:
+    description:
+      Max RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100000
+
+  min-rpm:
+    description:
+      Min RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1000
+
+  pulses-per-revolution:
+    description:
+      The number of pulse from fan sensor per revolution.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4
+
+  tach-div:
+    description:
+      Divisor for the tach sampling clock, which determines the sensitivity of the tach pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  target-rpm:
+    description:
+      The default desired fan speed in RPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fan-driving-mode:
+    description:
+      Select the driving mode of the fan.(DC, PWM and so on)
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ dc, pwm ]
+
+  pwms:
+    description:
+      PWM provider.
+    maxItems: 1
+
+  "#cooling-cells":
+    const: 2
+
+  cooling-levels:
+    description:
+      The control value which correspond to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  tach-ch:
+    description:
+      The tach channel used for the fan.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  label:
+    description:
+      Optional fan label
+
+  fan-supply:
+    description:
+      Power supply for fan.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Bindings/hwmon/hwmon-common.yaml b/Bindings/hwmon/hwmon-common.yaml
new file mode 100644
index 0000000000..dc86b5c72c
--- /dev/null
+++ b/Bindings/hwmon/hwmon-common.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware Monitoring Devices Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  label:
+    description: A descriptive name for this device.
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor.
+
+additionalProperties: true
diff --git a/Bindings/hwmon/lltc,ltc4151.yaml b/Bindings/hwmon/lltc,ltc4151.yaml
index e62aff6704..8f0095bb7f 100644
--- a/Bindings/hwmon/lltc,ltc4151.yaml
+++ b/Bindings/hwmon/lltc,ltc4151.yaml
@@ -25,7 +25,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/lltc,ltc4286.yaml b/Bindings/hwmon/lltc,ltc4286.yaml
index 98ca163d34..853df9fef6 100644
--- a/Bindings/hwmon/lltc,ltc4286.yaml
+++ b/Bindings/hwmon/lltc,ltc4286.yaml
@@ -25,15 +25,14 @@ properties:
       The default is 102.4 volts.
     type: boolean
 
-  shunt-resistor-micro-ohms:
-    description:
-      Resistor value micro-ohms.
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/lm75.yaml b/Bindings/hwmon/lm75.yaml
index ed269e428a..29bd7460cc 100644
--- a/Bindings/hwmon/lm75.yaml
+++ b/Bindings/hwmon/lm75.yaml
@@ -57,6 +57,7 @@ required:
   - reg
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       not:
         properties:
@@ -71,7 +72,7 @@ allOf:
       properties:
         interrupts: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/nuvoton,nct6775.yaml b/Bindings/hwmon/nuvoton,nct6775.yaml
index 358b262431..e3db642878 100644
--- a/Bindings/hwmon/nuvoton,nct6775.yaml
+++ b/Bindings/hwmon/nuvoton,nct6775.yaml
@@ -25,6 +25,7 @@ properties:
       - nuvoton,nct6796
       - nuvoton,nct6797
       - nuvoton,nct6798
+      - nuvoton,nct6799
 
   reg:
     maxItems: 1
diff --git a/Bindings/hwmon/pmbus/infineon,tda38640.yaml b/Bindings/hwmon/pmbus/infineon,tda38640.yaml
index ded1c11576..5c4e52b472 100644
--- a/Bindings/hwmon/pmbus/infineon,tda38640.yaml
+++ b/Bindings/hwmon/pmbus/infineon,tda38640.yaml
@@ -30,6 +30,23 @@ properties:
       unconnected(has internal pull-down).
     type: boolean
 
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -38,6 +55,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,5 +63,15 @@ examples:
         tda38640@40 {
             compatible = "infineon,tda38640";
             reg = <0x40>;
+
+            interrupt-parent = <&smb_pex_cpu0_event>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                pvnn_main_cpu0: vout {
+                    regulator-name = "pvnn_main_cpu0";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
         };
     };
diff --git a/Bindings/hwmon/pmbus/ti,lm25066.yaml b/Bindings/hwmon/pmbus/ti,lm25066.yaml
index da8292bc32..a20f140dc7 100644
--- a/Bindings/hwmon/pmbus/ti,lm25066.yaml
+++ b/Bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -34,11 +34,26 @@ properties:
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/hwmon/hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/ti,ina2xx.yaml b/Bindings/hwmon/ti,ina2xx.yaml
index 378d1f6aee..df86c2c920 100644
--- a/Bindings/hwmon/ti,ina2xx.yaml
+++ b/Bindings/hwmon/ti,ina2xx.yaml
@@ -28,10 +28,14 @@ properties:
       - ti,ina231
       - ti,ina237
       - ti,ina238
+      - ti,ina260
 
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   shunt-resistor:
     description:
       Shunt resistor value in micro-Ohm.
@@ -66,7 +70,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -77,6 +84,8 @@ examples:
         power-sensor@44 {
             compatible = "ti,ina220";
             reg = <0x44>;
+            #io-channel-cells = <1>;
+            label = "vdd_3v0";
             shunt-resistor = <1000>;
             vs-supply = <&vdd_3v0>;
         };
diff --git a/Bindings/hwmon/ti,tmp513.yaml b/Bindings/hwmon/ti,tmp513.yaml
index cdd1489e0c..227858e760 100644
--- a/Bindings/hwmon/ti,tmp513.yaml
+++ b/Bindings/hwmon/ti,tmp513.yaml
@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/ti,tps23861.yaml b/Bindings/hwmon/ti,tps23861.yaml
index ebc8d466c1..f58248c29e 100644
--- a/Bindings/hwmon/ti,tps23861.yaml
+++ b/Bindings/hwmon/ti,tps23861.yaml
@@ -35,7 +35,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/i2c/atmel,at91sam-i2c.yaml b/Bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3ec3..b1c13bab24 100644
--- a/Bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Bindings/i2c/atmel,at91sam-i2c.yaml
@@ -25,7 +25,9 @@ properties:
               - atmel,sama5d2-i2c
               - microchip,sam9x60-i2c
       - items:
-          - const: microchip,sama7g5-i2c
+          - enum:
+              - microchip,sama7g5-i2c
+              - microchip,sam9x7-i2c
           - const: microchip,sam9x60-i2c
 
   reg:
diff --git a/Bindings/i2c/i2c-demux-pinctrl.yaml b/Bindings/i2c/i2c-demux-pinctrl.yaml
index 2c08f2a7cf..b813f6d481 100644
--- a/Bindings/i2c/i2c-demux-pinctrl.yaml
+++ b/Bindings/i2c/i2c-demux-pinctrl.yaml
@@ -32,7 +32,6 @@ description: |
       +-------------------------------+
 
 allOf:
-  - $ref: i2c-mux.yaml
   - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
@@ -41,6 +40,8 @@ properties:
 
   i2c-parent:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       List of phandles of I2C masters available for selection.  The first one
       will be used as default.
diff --git a/Bindings/i2c/i2c-exynos5.yaml b/Bindings/i2c/i2c-exynos5.yaml
index df9c57bca2..cc8bba5537 100644
--- a/Bindings/i2c/i2c-exynos5.yaml
+++ b/Bindings/i2c/i2c-exynos5.yaml
@@ -33,6 +33,7 @@ properties:
           - const: samsung,exynos7-hsi2c
       - items:
           - enum:
+              - google,gs101-hsi2c
               - samsung,exynos850-hsi2c
           - const: samsung,exynosautov9-hsi2c
       - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
diff --git a/Bindings/i2c/i2c-imx-lpi2c.yaml b/Bindings/i2c/i2c-imx-lpi2c.yaml
index 4656f5112b..54d500be6a 100644
--- a/Bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Bindings/i2c/i2c-imx-lpi2c.yaml
@@ -24,6 +24,7 @@ properties:
               - fsl,imx8qm-lpi2c
               - fsl,imx8ulp-lpi2c
               - fsl,imx93-lpi2c
+              - fsl,imx95-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
diff --git a/Bindings/i2c/i2c-mpc.yaml b/Bindings/i2c/i2c-mpc.yaml
index 70fb69b923..b1d7d14c0b 100644
--- a/Bindings/i2c/i2c-mpc.yaml
+++ b/Bindings/i2c/i2c-mpc.yaml
@@ -96,6 +96,6 @@ examples:
         interrupts = <43 2>;
         interrupt-parent = <&mpic>;
         clock-frequency = <400000>;
-        i2c-scl-clk-low-timeout-us = <10000>;
+        i2c-transfer-timeout-us = <10000>;
     };
 ...
diff --git a/Bindings/i2c/i2c-mux-pca954x.yaml b/Bindings/i2c/i2c-mux-pca954x.yaml
index 2d7bb998b0..9aa0585200 100644
--- a/Bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Bindings/i2c/i2c-mux-pca954x.yaml
@@ -71,6 +71,23 @@ properties:
     description: A voltage regulator supplying power to the chip. On PCA9846
       the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
 
+  maxim,isolate-stuck-channel:
+    type: boolean
+    description: Allows to use non faulty channels while a stuck channel is
+      isolated from the upstream bus. If not set all channels are isolated from
+      the upstream bus until the fault is cleared.
+
+  maxim,send-flush-out-sequence:
+    type: boolean
+    description: Send a flush-out sequence to stuck auxiliary buses
+      automatically after a stuck channel is being detected.
+
+  maxim,preconnection-wiggle-test-enable:
+    type: boolean
+    description: Send a STOP condition to the auxiliary buses when the switch
+      register activates a channel to detect a stuck high fault. On fault the
+      channel is isolated from the upstream bus.
+
 required:
   - compatible
   - reg
@@ -95,6 +112,19 @@ allOf:
         "#interrupt-cells": false
         interrupt-controller: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7357
+    then:
+      properties:
+        maxim,isolate-stuck-channel: false
+        maxim,send-flush-out-sequence: false
+        maxim,preconnection-wiggle-test-enable: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/i2c/i2c-pxa.yaml b/Bindings/i2c/i2c-pxa.yaml
index 31386a8d76..e89ee36174 100644
--- a/Bindings/i2c/i2c-pxa.yaml
+++ b/Bindings/i2c/i2c-pxa.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Marvell MMP I2C controller
 
 maintainers:
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Bindings/i2c/i2c.txt b/Bindings/i2c/i2c.txt
deleted file mode 100644
index fc3dd7ec04..0000000000
--- a/Bindings/i2c/i2c.txt
+++ /dev/null
@@ -1,151 +0,0 @@
-Generic device tree bindings for I2C busses
-===========================================
-
-This document describes generic bindings which can be used to describe I2C
-busses and their child devices in a device tree.
-
-Required properties (per bus)
------------------------------
-
-- #address-cells  - should be <1>. Read more about addresses below.
-- #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller
-
-For other required properties e.g. to describe register sets,
-clocks, etc. check the binding documentation of the specific driver.
-
-The cells properties above define that an address of children of an I2C bus
-are described by a single value.
-
-Optional properties (per bus)
------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- clock-frequency
-	frequency of bus clock in Hz.
-
-- i2c-bus
-	For I2C adapters that have child nodes that are a mixture of both I2C
-	devices and non-I2C devices, the 'i2c-bus' subnode can be used for
-	populating I2C devices. If the 'i2c-bus' subnode is present, only
-	subnodes of this will be considered as I2C slaves. The properties,
-	'#address-cells' and '#size-cells' must be defined under this subnode
-	if present.
-
-- i2c-scl-falling-time-ns
-	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-scl-internal-delay-ns
-	Number of nanoseconds the IP core additionally needs to setup SCL.
-
-- i2c-scl-rising-time-ns
-	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
-	specification.
-
-- i2c-sda-falling-time-ns
-	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-analog-filter
-	Enable analog filter for i2c lines.
-
-- i2c-digital-filter
-	Enable digital filter for i2c lines.
-
-- i2c-digital-filter-width-ns
-	Width of spikes which can be filtered by digital filter
-	(i2c-digital-filter). This width is specified in nanoseconds.
-
-- i2c-analog-filter-cutoff-frequency
-	Frequency that the analog filter (i2c-analog-filter) uses to distinguish
-	which signal to filter. Signal with higher frequency than specified will
-	be filtered out. Only lower frequency will pass (this is applicable to
-	a low-pass analog filter). Typical value should be above the normal
-	i2c bus clock frequency (clock-frequency).
-	Specified in Hz.
-
-- multi-master
-	states that there is another master active on this bus. The OS can use
-	this information to adapt power management to keep the arbitration awake
-	all the time, for example. Can not be combined with 'single-master'.
-
-- pinctrl
-	add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
-	recovery, call it "gpio" or "recovery" (deprecated) state
-
-- scl-gpios
-	specify the gpio related to SCL pin. Used for GPIO bus recovery.
-
-- sda-gpios
-	specify the gpio related to SDA pin. Optional for GPIO bus recovery.
-
-- single-master
-	states that there is no other master active on this bus. The OS can use
-	this information to detect a stalled bus more reliably, for example.
-	Can not be combined with 'multi-master'.
-
-- smbus
-	states that additional SMBus restrictions and features apply to this bus.
-	An example of feature is SMBusHostNotify. Examples of restrictions are
-	more reserved addresses and timeout definitions.
-
-- smbus-alert
-	states that the optional SMBus-Alert feature apply to this bus.
-
-- mctp-controller
-	indicates that the system is accessible via this bus as an endpoint for
-	MCTP over I2C transport.
-
-Required properties (per child device)
---------------------------------------
-
-- compatible
-	name of I2C slave device
-
-- reg
-	One or many I2C slave addresses. These are usually a 7 bit addresses.
-	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
-	used to mark a 10 bit address. It is needed to avoid the ambiguity
-	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
-	which, in theory, can be on the same bus.
-	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
-	listen to be devices ourselves.
-
-Optional properties (per child device)
---------------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- reg-names
-	Names of map programmable addresses.
-	It can contain any map needing another address than default one.
-
-- wakeup-source
-	device can be used as a wakeup source.
-
-Binding may contain optional "interrupts" property, describing interrupts
-used by the device. I2C core will assign "irq" interrupt (or the very first
-interrupt if not using interrupt names) as primary interrupt for the slave.
-
-Alternatively, devices supporting SMBus Host Notify, and connected to
-adapters that support this feature, may use "host-notify" property. I2C
-core will create a virtual interrupt for Host Notify and assign it as
-primary interrupt for the slave.
-
-Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
-interrupt for the device. If "wakeup" interrupt name is not present in the
-binding, then primary interrupt will be used as wakeup interrupt.
diff --git a/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
index b8319dcf3d..8676335e9e 100644
--- a/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
+++ b/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -21,8 +21,7 @@ description: |
   See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
   binding.
 
-  This node represents an I2C controller. See ../i2c/i2c.txt for details
-  of the core I2C binding.
+  This node represents an I2C controller.
 
 properties:
   compatible:
diff --git a/Bindings/i2c/qcom,i2c-cci.yaml b/Bindings/i2c/qcom,i2c-cci.yaml
index 8386cfe215..f0eabff863 100644
--- a/Bindings/i2c/qcom,i2c-cci.yaml
+++ b/Bindings/i2c/qcom,i2c-cci.yaml
@@ -270,7 +270,7 @@ examples:
 
                 port {
                     ov7251_ep: endpoint {
-                        data-lanes = <0 1>;
+                        data-lanes = <0>;
                         link-frequencies = /bits/ 64 <240000000 319200000>;
                         remote-endpoint = <&csiphy3_ep>;
                     };
diff --git a/Bindings/i2c/renesas,rcar-i2c.yaml b/Bindings/i2c/renesas,rcar-i2c.yaml
index c4ace5585e..51b220da46 100644
--- a/Bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Bindings/i2c/renesas,rcar-i2c.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,i2c-r8a779a0     # R-Car V3U
               - renesas,i2c-r8a779f0     # R-Car S4-8
               - renesas,i2c-r8a779g0     # R-Car V4H
+              - renesas,i2c-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-i2c # R-Car Gen4
 
   reg:
diff --git a/Bindings/i2c/st,nomadik-i2c.yaml b/Bindings/i2c/st,nomadik-i2c.yaml
index 16024415a4..44c54b162b 100644
--- a/Bindings/i2c/st,nomadik-i2c.yaml
+++ b/Bindings/i2c/st,nomadik-i2c.yaml
@@ -14,9 +14,6 @@ description: The Nomadik I2C host controller began its life in the ST
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
 select:
   properties:
@@ -24,21 +21,23 @@ select:
       contains:
         enum:
           - st,nomadik-i2c
+          - mobileye,eyeq5-i2c
   required:
     - compatible
 
 properties:
   compatible:
     oneOf:
-      # The variant found in STn8815
       - items:
           - const: st,nomadik-i2c
           - const: arm,primecell
-      # The variant found in DB8500
       - items:
           - const: stericsson,db8500-i2c
           - const: st,nomadik-i2c
           - const: arm,primecell
+      - items:
+          - const: mobileye,eyeq5-i2c
+          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -55,7 +54,7 @@ properties:
       - items:
           - const: mclk
           - const: apb_pclk
-      # Clock name in DB8500
+      # Clock name in DB8500 or EyeQ5
       - items:
           - const: i2cclk
           - const: apb_pclk
@@ -70,6 +69,16 @@ properties:
     minimum: 1
     maximum: 400000
 
+  mobileye,olb:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to OLB system controller node.
+          - description: Platform-wide controller ID (integer starting from zero).
+    description:
+      The phandle pointing to OLB system controller node, with the I2C
+      controller index.
+
 required:
   - compatible
   - reg
@@ -79,6 +88,20 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-i2c
+    then:
+      required:
+        - mobileye,olb
+    else:
+      properties:
+        mobileye,olb: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -111,5 +134,19 @@ examples:
       clocks = <&i2c0clk>, <&pclki2c0>;
       clock-names = "mclk", "apb_pclk";
     };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    i2c@300000 {
+      compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+      reg = <0x300000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c_ser_clk>, <&i2c_clk>;
+      clock-names = "i2cclk", "apb_pclk";
+      mobileye,olb = <&olb 0>;
+    };
 
 ...
diff --git a/Bindings/i3c/aspeed,ast2600-i3c.yaml b/Bindings/i3c/aspeed,ast2600-i3c.yaml
index fcc3dbff9c..47be5d9a32 100644
--- a/Bindings/i3c/aspeed,ast2600-i3c.yaml
+++ b/Bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -57,7 +57,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    i3c-master@2000 {
+    i3c@2000 {
         compatible = "aspeed,ast2600-i3c";
         reg = <0x2000 0x1000>;
         #address-cells = <3>;
diff --git a/Bindings/i3c/cdns,i3c-master.yaml b/Bindings/i3c/cdns,i3c-master.yaml
index cc40d25358..cad6d53d0e 100644
--- a/Bindings/i3c/cdns,i3c-master.yaml
+++ b/Bindings/i3c/cdns,i3c-master.yaml
@@ -41,7 +41,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@d040000 {
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
diff --git a/Bindings/i3c/i3c.yaml b/Bindings/i3c/i3c.yaml
index c816e295d5..113957ebe9 100644
--- a/Bindings/i3c/i3c.yaml
+++ b/Bindings/i3c/i3c.yaml
@@ -17,7 +17,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^i3c-master@[0-9a-f]+$"
+    pattern: "^i3c@[0-9a-f]+$"
 
   "#address-cells":
     const: 3
@@ -71,7 +71,7 @@ patternProperties:
     description: |
       I2C child, should be named: <device-type>@<i2c-address>
 
-      All properties described in Documentation/devicetree/bindings/i2c/i2c.txt
+      All properties described in dtschema schemas/i2c/i2c-controller.yaml
       are valid here, except the reg property whose content is changed.
 
     properties:
@@ -153,7 +153,7 @@ additionalProperties: true
 
 examples:
   - |
-    i3c-master@d040000 {
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
diff --git a/Bindings/i3c/mipi-i3c-hci.yaml b/Bindings/i3c/mipi-i3c-hci.yaml
index 5dda8cb44c..39bb1a1784 100644
--- a/Bindings/i3c/mipi-i3c-hci.yaml
+++ b/Bindings/i3c/mipi-i3c-hci.yaml
@@ -43,7 +43,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
       compatible = "mipi-i3c-hci";
       reg = <0xa0000000 0x2000>;
       interrupts = <89>;
diff --git a/Bindings/i3c/silvaco,i3c-master.yaml b/Bindings/i3c/silvaco,i3c-master.yaml
index 133855f11b..c56ff77677 100644
--- a/Bindings/i3c/silvaco,i3c-master.yaml
+++ b/Bindings/i3c/silvaco,i3c-master.yaml
@@ -48,7 +48,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
         compatible = "silvaco,i3c-master-v1";
         clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
         clock-names = "pclk", "fast_clk", "slow_clk";
diff --git a/Bindings/i3c/snps,dw-i3c-master.yaml b/Bindings/i3c/snps,dw-i3c-master.yaml
index 7a76fd3296..c0e805e531 100644
--- a/Bindings/i3c/snps,dw-i3c-master.yaml
+++ b/Bindings/i3c/snps,dw-i3c-master.yaml
@@ -35,7 +35,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@2000 {
+    i3c@2000 {
         compatible = "snps,dw-i3c-master-1.00a";
         #address-cells = <3>;
         #size-cells = <0>;
diff --git a/Bindings/iio/adc/adc.yaml b/Bindings/iio/adc/adc.yaml
index 2616017297..36775f8f71 100644
--- a/Bindings/iio/adc/adc.yaml
+++ b/Bindings/iio/adc/adc.yaml
@@ -22,7 +22,6 @@ properties:
     maxItems: 1
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Unique name to identify which channel this is.
 
   bipolar:
diff --git a/Bindings/iio/adc/adi,ad9467.yaml b/Bindings/iio/adc/adi,ad9467.yaml
index 7aa748d6b7..eecd5fbab6 100644
--- a/Bindings/iio/adc/adi,ad9467.yaml
+++ b/Bindings/iio/adc/adi,ad9467.yaml
@@ -44,6 +44,9 @@ properties:
       Pin that controls the powerdown mode of the device.
     maxItems: 1
 
+  io-backends:
+    maxItems: 1
+
   reset-gpios:
     description:
       Reset pin for the device.
@@ -68,6 +71,7 @@ examples:
             reg = <0>;
             clocks = <&adc_clk>;
             clock-names = "adc-clk";
+            io-backends = <&iio_backend>;
         };
     };
 ...
diff --git a/Bindings/iio/adc/adi,axi-adc.yaml b/Bindings/iio/adc/adi,axi-adc.yaml
index 9996dd93f8..3d49d21ad3 100644
--- a/Bindings/iio/adc/adi,axi-adc.yaml
+++ b/Bindings/iio/adc/adi,axi-adc.yaml
@@ -39,12 +39,15 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
 
 additionalProperties: false
 
@@ -55,7 +58,6 @@ examples:
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git a/Bindings/iio/adc/microchip,pac1934.yaml b/Bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 0000000000..47a11a9ac9
--- /dev/null
+++ b/Bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/iio/adc/nxp,imx93-adc.yaml b/Bindings/iio/adc/nxp,imx93-adc.yaml
index dacc526dc6..dfc3f51291 100644
--- a/Bindings/iio/adc/nxp,imx93-adc.yaml
+++ b/Bindings/iio/adc/nxp,imx93-adc.yaml
@@ -31,7 +31,6 @@ properties:
       - description: normal conversion, include EOC (End of Conversion),
           ECH (End of Chain), JEOC (End of Injected Conversion) and
           JECH (End of injected Chain).
-      - description: Self-testing Interrupts.
 
   clocks:
     maxItems: 1
@@ -70,8 +69,7 @@ examples:
             reg = <0x44530000 0x10000>;
             interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&clk IMX93_CLK_ADC1_GATE>;
             clock-names = "ipg";
             vref-supply = <&reg_vref_1v8>;
diff --git a/Bindings/iio/adc/qcom,spmi-vadc.yaml b/Bindings/iio/adc/qcom,spmi-vadc.yaml
index 40fa0710f1..c28db0d635 100644
--- a/Bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -75,7 +75,6 @@ patternProperties:
           in the PMIC-specific files in include/dt-bindings/iio/.
 
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: |
             ADC input of the platform as seen in the schematics.
             For thermistor inputs connected to generic AMUX or GPIO inputs
diff --git a/Bindings/iio/adc/richtek,rtq6056.yaml b/Bindings/iio/adc/richtek,rtq6056.yaml
index 88e008629e..af2c3a67f8 100644
--- a/Bindings/iio/adc/richtek,rtq6056.yaml
+++ b/Bindings/iio/adc/richtek,rtq6056.yaml
@@ -25,7 +25,14 @@ description: |
 
 properties:
   compatible:
-    const: richtek,rtq6056
+    oneOf:
+      - enum:
+          - richtek,rtq6056
+          - richtek,rtq6059
+      - items:
+          - enum:
+              - richtek,rtq6053
+          - const: richtek,rtq6056
 
   reg:
     maxItems: 1
diff --git a/Bindings/iio/adc/ti,ads1298.yaml b/Bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 0000000000..bf5a43a81d
--- /dev/null
+++ b/Bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+description: |
+  Datasheet at: https://www.ti.com/product/ADS1298
+  Bindings for this chip aren't complete.
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1298
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog power supply, voltage between AVDD and AVSS. When providing a
+      symmetric +/- 2.5V, the regulator should report 5V.
+
+  vref-supply:
+    description:
+      Optional reference voltage. If omitted, internal reference is used,
+      which is 2.4V when analog supply is below 4.4V, 4V otherwise.
+
+  clocks:
+    description: Optional 2.048 MHz external source clock on CLK pin
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt on DRDY pin, triggers on falling edge
+    maxItems: 1
+
+  label: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1 {
+          reg = <1>;
+          compatible = "ti,ads1298";
+          label = "ads1298-1-ecg";
+          avdd-supply = <&reg_iso_5v_a>;
+          clocks = <&clk_ads1298>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+          spi-max-frequency = <20000000>;
+          spi-cpha;
+        };
+    };
+...
diff --git a/Bindings/iio/afe/voltage-divider.yaml b/Bindings/iio/afe/voltage-divider.yaml
index dddf97b505..4151f99b42 100644
--- a/Bindings/iio/afe/voltage-divider.yaml
+++ b/Bindings/iio/afe/voltage-divider.yaml
@@ -39,6 +39,17 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  '#io-channel-cells':
+    description:
+      In addition to consuming the measurement services of a voltage
+      output channel, the voltage divider can act as a provider of
+      measurement services to other devices. This is particularly
+      useful in scenarios wherein an ADC has an analog frontend,
+      such as a voltage divider, and then consuming its raw value
+      isn't interesting. In this case, the voltage before the divider
+      is desired.
+    const: 1
+
   output-ohms:
     description:
       Resistance Rout over which the output voltage is measured. See full-ohms.
diff --git a/Bindings/iio/amplifiers/adi,hmc425a.yaml b/Bindings/iio/amplifiers/adi,hmc425a.yaml
index 67de9d4e3a..3a470459b9 100644
--- a/Bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -21,6 +21,8 @@ description: |
   HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
 
+  LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf
 
 properties:
   compatible:
@@ -28,16 +30,55 @@ properties:
       - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
+      - adi,ltc6373
 
   vcc-supply: true
 
   ctrl-gpios:
     description:
-      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
-      connected to the control pins V1-V6.
-    minItems: 6
+      Must contain an array of GPIO specifiers, referring to the GPIO pins
+      connected to the control pins.
+        ADRF5740  - 4 GPIO connected to D2-D5
+        HMC540S   - 4 GPIO connected to V1-V4
+        HMC425A   - 6 GPIO connected to V1-V6
+        LTC6373   - 3 GPIO connected to A0-A2
+    minItems: 1
     maxItems: 6
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,hmc425a
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 6
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,adrf5740
+              - const: adi,hmc540s
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 4
+          maxItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ltc6373
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 3
+          maxItems: 3
+
 required:
   - compatible
   - ctrl-gpios
diff --git a/Bindings/iio/frequency/adi,admfm2000.yaml b/Bindings/iio/frequency/adi,admfm2000.yaml
new file mode 100644
index 0000000000..2bcf4bbc12
--- /dev/null
+++ b/Bindings/iio/frequency/adi,admfm2000.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMFM2000 Dual Microwave Down Converter
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+  Dual microwave down converter module with input RF and LO frequency ranges
+  from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz.
+  It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down
+  conversion path.
+
+properties:
+  compatible:
+    enum:
+      - adi,admfm2000
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of the device.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 1
+
+      adi,mixer-mode:
+        description:
+          Enable mixer mode for the channel. It downconverts RF between 5 GHz
+          and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel
+          is in direct IF mode which bypasses the mixer and downconverts RF
+          between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz.
+        type: boolean
+
+      switch-gpios:
+        description: |
+          GPIOs to select the RF path for the channel. The same state of CTRL-A
+          and CTRL-B GPIOs is not permitted.
+          CTRL-A   CTRL-B    CH1 Status        CH2 Status
+          1        0         Direct IF mode    Mixer mode
+          0        1         Mixer mode        Direct IF mode
+
+        items:
+          - description: CTRL-A GPIO
+          - description: CTRL-B GPIO
+
+      attenuation-gpios:
+        description: |
+          Choice of attenuation:
+          DSA-V4  DSA-V3  DSA-V2  DSA-V1  DSA-V0
+          1       1       1       1       1        0 dB
+          1       1       1       1       0        -1 dB
+          1       1       1       0       1        -2 dB
+          1       1       0       1       1        -4 dB
+          1       0       1       1       1        -8 dB
+          0       1       1       1       1        -16 dB
+          0       0       0       0       0        -31 dB
+
+        items:
+          - description: DSA-V0 GPIO
+          - description: DSA-V1 GPIO
+          - description: DSA-V2 GPIO
+          - description: DSA-V3 GPIO
+          - description: DSA-V4 GPIO
+
+    required:
+      - reg
+      - switch-gpios
+      - attenuation-gpios
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    converter {
+      compatible = "adi,admfm2000";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+        switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>,
+                       <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>,
+                            <&gpio 22 GPIO_ACTIVE_LOW>,
+                            <&gpio 23 GPIO_ACTIVE_LOW>,
+                            <&gpio 24 GPIO_ACTIVE_LOW>,
+                            <&gpio 25 GPIO_ACTIVE_LOW>;
+      };
+
+      channel@1 {
+        reg = <1>;
+        adi,mixer-mode;
+        switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>,
+                       <&gpio 4 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                            <&gpio 5 GPIO_ACTIVE_LOW>,
+                            <&gpio 6 GPIO_ACTIVE_LOW>,
+                            <&gpio 16 GPIO_ACTIVE_LOW>,
+                            <&gpio 26 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Bindings/iio/gyroscope/bosch,bmg160.yaml b/Bindings/iio/gyroscope/bosch,bmg160.yaml
index 1414ba9977..3c6fe74af0 100644
--- a/Bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -22,6 +22,9 @@ properties:
   vdd-supply: true
   vddio-supply: true
 
+  spi-max-frequency:
+    maximum: 10000000
+
   interrupts:
     minItems: 1
     maxItems: 2
@@ -33,7 +36,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/iio/health/maxim,max30102.yaml b/Bindings/iio/health/maxim,max30102.yaml
index c13c10c8d6..eed0df9d3a 100644
--- a/Bindings/iio/health/maxim,max30102.yaml
+++ b/Bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git a/Bindings/iio/humidity/ti,hdc2010.yaml b/Bindings/iio/humidity/ti,hdc2010.yaml
index 79e75a8675..e3eca89175 100644
--- a/Bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Bindings/iio/humidity/ti,hdc2010.yaml
@@ -27,6 +27,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/iio/humidity/ti,hdc3020.yaml b/Bindings/iio/humidity/ti,hdc3020.yaml
index 7f6d0f9edc..8b5dedd1a5 100644
--- a/Bindings/iio/humidity/ti,hdc3020.yaml
+++ b/Bindings/iio/humidity/ti,hdc3020.yaml
@@ -43,6 +43,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -51,5 +52,7 @@ examples:
             compatible = "ti,hdc3021", "ti,hdc3020";
             reg = <0x47>;
             vdd-supply = <&vcc_3v3>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
         };
     };
diff --git a/Bindings/iio/imu/st,lsm6dsx.yaml b/Bindings/iio/imu/st,lsm6dsx.yaml
index 28b667a9cb..c48a96d17f 100644
--- a/Bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Bindings/iio/imu/st,lsm6dsx.yaml
@@ -35,7 +35,9 @@ properties:
           - st,lsm6dsv
           - st,lsm6dso16is
       - items:
-          - const: st,asm330lhhx
+          - enum:
+              - st,asm330lhhx
+              - st,asm330lhhxg1
           - const: st,lsm6dsr
       - items:
           - const: st,lsm6dstx
diff --git a/Bindings/iio/light/ams,as73211.yaml b/Bindings/iio/light/ams,as73211.yaml
index 0e8cd02759..062a038aa0 100644
--- a/Bindings/iio/light/ams,as73211.yaml
+++ b/Bindings/iio/light/ams,as73211.yaml
@@ -4,19 +4,22 @@
 $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor
 
 maintainers:
   - Christian Eggers <ceggers@arri.de>
 
 description: |
-  XYZ True Color Sensor with I2C Interface
+  AMS AS73211 XYZ True Color Sensor with I2C Interface
   https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+  AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface
+  https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf
 
 properties:
   compatible:
     enum:
       - ams,as73211
+      - ams,as7331
 
   reg:
     description:
diff --git a/Bindings/iio/light/vishay,veml6075.yaml b/Bindings/iio/light/vishay,veml6075.yaml
index abee04cd12..91c318746b 100644
--- a/Bindings/iio/light/vishay,veml6075.yaml
+++ b/Bindings/iio/light/vishay,veml6075.yaml
@@ -21,6 +21,7 @@ properties:
 required:
   - compatible
   - reg
+  - vdd-supply
 
 additionalProperties: false
 
diff --git a/Bindings/iio/magnetometer/voltafield,af8133j.yaml b/Bindings/iio/magnetometer/voltafield,af8133j.yaml
new file mode 100644
index 0000000000..b6ab01a691
--- /dev/null
+++ b/Bindings/iio/magnetometer/voltafield,af8133j.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltafield AF8133J magnetometer sensor
+
+maintainers:
+  - Ondřej Jirman <megi@xff.cz>
+
+properties:
+  compatible:
+    const: voltafield,af8133j
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A signal for active low reset input of the sensor. (optional; if not
+      used, software reset over I2C will be used instead)
+
+  avdd-supply:
+    description:
+      A regulator that provides AVDD power (Working power, usually 3.3V) to
+      the sensor.
+
+  dvdd-supply:
+    description:
+      A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD)
+      to the sensor.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@1c {
+            compatible = "voltafield,af8133j";
+            reg = <0x1c>;
+            avdd-supply = <&reg_dldo1>;
+            dvdd-supply = <&reg_dldo1>;
+            reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Bindings/iio/pressure/honeywell,hsc030pa.yaml b/Bindings/iio/pressure/honeywell,hsc030pa.yaml
index 65a24ed67b..89977b9f01 100644
--- a/Bindings/iio/pressure/honeywell,hsc030pa.yaml
+++ b/Bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -99,6 +99,9 @@ required:
   - honeywell,transfer-function
   - honeywell,pressure-triplet
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
 additionalProperties: false
 
 dependentSchemas:
diff --git a/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
index d9e903fbfd..6994b30015 100644
--- a/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ b/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
 
 description: |
   Honeywell pressure sensor of model mprls0025pa.
 
-  This sensor has an I2C and SPI interface. Only the I2C interface is
-  implemented.
+  This sensor has an I2C and SPI interface.
 
   There are many models with different pressure ranges available. The vendor
   calls them "mpr series". All of them have the identical programming model and
   differ in the pressure range, unit and transfer function.
 
-  To support different models one need to specify the pressure range as well as
-  the transfer function. Pressure range needs to be converted from its unit to
-  pascal.
+  To support different models one need to specify its pressure triplet as well
+  as the transfer function.
+
+  For custom silicon chips not covered by the Honeywell MPR series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+  The minimal range value stands for the minimum pressure and the maximum value
+  also for the maximum pressure with linear relation inside the range.
 
   The transfer function defines the ranges of numerical values delivered by the
-  sensor. The minimal range value stands for the minimum pressure and the
-  maximum value also for the maximum pressure with linear relation inside the
-  range.
+  sensor.
 
   Specifications about the devices can be found at:
     https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
@@ -42,6 +45,10 @@ properties:
     maxItems: 1
 
   interrupts:
+    description:
+      Optional interrupt for indicating End-of-conversion.
+      If not present, the driver loops for a while until the received status
+      byte indicates correct measurement.
     maxItems: 1
 
   reset-gpios:
@@ -50,14 +57,6 @@ properties:
       If not present the device is not reset during the probe.
     maxItems: 1
 
-  honeywell,pmin-pascal:
-    description:
-      Minimum pressure value the sensor can measure in pascal.
-
-  honeywell,pmax-pascal:
-    description:
-      Maximum pressure value the sensor can measure in pascal.
-
   honeywell,transfer-function:
     description: |
       Transfer function which defines the range of valid values delivered by the
@@ -65,19 +64,57 @@ properties:
       1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
       2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
       3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    enum: [1, 2, 3]
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+
+  spi-max-frequency:
+    maximum: 800000
+
   vdd-supply:
     description: provide VDD power to the sensor.
 
 required:
   - compatible
   - reg
-  - honeywell,pmin-pascal
-  - honeywell,pmax-pascal
   - honeywell,transfer-function
   - vdd-supply
 
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
 additionalProperties: false
 
 examples:
@@ -93,10 +130,29 @@ examples:
             reg = <0x18>;
             reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
             interrupt-parent = <&gpio3>;
-            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
-            honeywell,pmin-pascal = <0>;
-            honeywell,pmax-pascal = <172369>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0025PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
             honeywell,transfer-function = <1>;
             vdd-supply = <&vcc_3v3>;
         };
     };
+...
diff --git a/Bindings/iio/temperature/ti,tmp117.yaml b/Bindings/iio/temperature/ti,tmp117.yaml
index 8c6d7735e8..58aa154277 100644
--- a/Bindings/iio/temperature/ti,tmp117.yaml
+++ b/Bindings/iio/temperature/ti,tmp117.yaml
@@ -24,9 +24,16 @@ properties:
   reg:
     maxItems: 1
 
+  vcc-supply:
+    description: provide VCC power to the sensor.
+
+  label:
+    description: Unique name to identify which device this is.
+
 required:
   - compatible
   - reg
+  - vcc-supply
 
 additionalProperties: false
 
@@ -39,5 +46,6 @@ examples:
         tmp117@48 {
              compatible = "ti,tmp117";
              reg = <0x48>;
+             vcc-supply = <&pmic_reg_3v3>;
         };
     };
diff --git a/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5efceb3138..c384bf0bb2 100644
--- a/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -49,7 +49,6 @@ patternProperties:
     $ref: input.yaml#
     properties:
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
       linux,code: true
diff --git a/Bindings/input/atmel,captouch.txt b/Bindings/input/atmel,captouch.txt
deleted file mode 100644
index fe9ee5c53b..0000000000
--- a/Bindings/input/atmel,captouch.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device tree bindings for Atmel capacitive touch device, typically
-an Atmel touch sensor connected to AtmegaXX MCU running firmware
-based on Qtouch library.
-
-The node for this device must be a child of a I2C controller node, as the
-device communicates via I2C.
-
-Required properties:
-
-	compatible:	Must be "atmel,captouch".
-	reg:		The I2C slave address of the device.
-	interrupts:	Property describing the interrupt line the device
-			is connected to. The device only has one interrupt
-			source.
-	linux,keycodes:	Specifies an array of numeric keycode values to
-			be used for reporting button presses. The array can
-			contain up to 8 entries.
-
-Optional properties:
-
-	autorepeat:	Enables the Linux input system's autorepeat
-			feature on the input device.
-
-Example:
-
-	atmel-captouch@51 {
-		compatible = "atmel,captouch";
-		reg = <0x51>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-		linux,keycodes = <BTN_0>, <BTN_1>,
-			<BTN_2>, <BTN_3>,
-			<BTN_4>, <BTN_5>,
-			<BTN_6>, <BTN_7>;
-		autorepeat;
-	};
diff --git a/Bindings/input/atmel,captouch.yaml b/Bindings/input/atmel,captouch.yaml
new file mode 100644
index 0000000000..f7477091d5
--- /dev/null
+++ b/Bindings/input/atmel,captouch.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,captouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel capacitive touch device
+
+maintainers:
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  Atmel capacitive touch device, typically an Atmel touch sensor connected to
+  AtmegaXX MCU running firmware based on Qtouch library.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: atmel,captouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - linux,keycodes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touch@51 {
+        compatible = "atmel,captouch";
+        reg = <0x51>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+        linux,keycodes = <BTN_0>, <BTN_1>,
+                         <BTN_2>, <BTN_3>,
+                         <BTN_4>, <BTN_5>,
+                         <BTN_6>, <BTN_7>;
+        autorepeat;
+      };
+    };
diff --git a/Bindings/input/da9062-onkey.txt b/Bindings/input/da9062-onkey.txt
deleted file mode 100644
index e5eef59a93..0000000000
--- a/Bindings/input/da9062-onkey.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Dialog DA9061/62/63 OnKey Module
-
-This module is part of the DA9061/DA9062/DA9063. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
-
-This module provides the KEY_POWER event.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-	"dlg,da9061-onkey", "dlg,da9062-onkey"
-	"dlg,da9062-onkey"
-	"dlg,da9063-onkey"
-
-Optional properties:
-
-- dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press when triggered using a long press of the OnKey.
-
-Example: DA9063
-
-	pmic0: da9063@58 {
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		onkey {
-			compatible = "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		onkey {
-			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
diff --git a/Bindings/input/dlg,da9062-onkey.yaml b/Bindings/input/dlg,da9062-onkey.yaml
new file mode 100644
index 0000000000..1480d95421
--- /dev/null
+++ b/Bindings/input/dlg,da9062-onkey.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9061/62/63 OnKey Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062/DA9063. For more details about entire
+  DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  This module provides the KEY_POWER event.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dlg,da9062-onkey
+          - dlg,da9063-onkey
+      - items:
+          - const: dlg,da9061-onkey
+          - const: dlg,da9062-onkey
+
+  dlg,disable-key-power:
+    type: boolean
+    description:
+      Disable power-down using a long key-press. If this entry exists
+      the OnKey driver will remove support for the KEY_POWER key press
+      when triggered using a long press of the OnKey.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/input/samsung,s3c6410-keypad.yaml b/Bindings/input/samsung,s3c6410-keypad.yaml
new file mode 100644
index 0000000000..a53569aa0e
--- /dev/null
+++ b/Bindings/input/samsung,s3c6410-keypad.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series Keypad Controller
+
+description:
+  Samsung SoC Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-keypad
+      - samsung,s5pv210-keypad
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: keypad
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  linux,input-no-autorepeat:
+    type: boolean
+    description:
+      Do no enable autorepeat feature.
+
+  linux,input-wakeup:
+    type: boolean
+    deprecated: true
+
+  samsung,keypad-num-columns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of column lines connected to the keypad controller.
+
+  samsung,keypad-num-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of row lines connected to the keypad controller.
+
+patternProperties:
+  '^key-[0-9a-z]+$':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each key connected to the keypad controller is represented as a child
+      node to the keypad controller device node.
+
+    properties:
+      keypad,column:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The column number to which the key is connected.
+
+      keypad,row:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The row number to which the key is connected.
+
+      linux,code: true
+
+    required:
+      - keypad,column
+      - keypad,row
+      - linux,code
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - samsung,keypad-num-columns
+  - samsung,keypad-num-rows
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    keypad@100a0000 {
+        compatible = "samsung,s5pv210-keypad";
+        reg = <0x100a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_KEYIF>;
+        clock-names = "keypad";
+
+        samsung,keypad-num-rows = <2>;
+        samsung,keypad-num-columns = <8>;
+        linux,input-no-autorepeat;
+        wakeup-source;
+
+        key-1 {
+            keypad,row = <0>;
+            keypad,column = <3>;
+            linux,code = <2>;
+        };
+
+        key-2 {
+            keypad,row = <0>;
+            keypad,column = <4>;
+            linux,code = <3>;
+        };
+    };
diff --git a/Bindings/input/samsung-keypad.txt b/Bindings/input/samsung-keypad.txt
deleted file mode 100644
index 4c5c0a8258..0000000000
--- a/Bindings/input/samsung-keypad.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung's Keypad Controller device tree bindings
-
-Samsung's Keypad controller is used to interface a SoC with a matrix-type
-keypad device. The keypad controller supports multiple row and column lines.
-A key can be placed at each intersection of a unique row and a unique column.
-The keypad controller can sense a key-press and key-release and report the
-event using a interrupt to the cpu.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
-    controller.
-  - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
-    controller.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- interrupts: The interrupt number to the cpu.
-
-Required Board Specific Properties:
-- samsung,keypad-num-rows: Number of row lines connected to the keypad
-  controller.
-
-- samsung,keypad-num-columns: Number of column lines connected to the
-  keypad controller.
-
-- Keys represented as child nodes: Each key connected to the keypad
-  controller is represented as a child node to the keypad controller
-  device node and should include the following properties.
-  - keypad,row: the row number to which the key is connected.
-  - keypad,column: the column number to which the key is connected.
-  - linux,code: the key-code to be reported when the key is pressed
-    and released.
-
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Optional Properties:
-- wakeup-source: use any event on keypad as wakeup event.
-		 (Legacy property supported: "linux,input-wakeup")
-
-Optional Properties specific to linux:
-- linux,keypad-no-autorepeat: do no enable autorepeat feature.
-
-
-Example:
-	keypad@100a0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <173>;
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,input-no-autorepeat;
-		wakeup-source;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_columns>;
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-	};
diff --git a/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
new file mode 100644
index 0000000000..678756ad0f
--- /dev/null
+++ b/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6UL Touch Controller
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-tsc
+
+  reg:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  interrupts:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tsc
+      - const: adc
+
+  xnur-gpios:
+    maxItems: 1
+    description:
+      The X- gpio this controller connect to. This xnur-gpio returns to
+      low once the finger leave the touch screen (The last touch event
+      the touch controller capture).
+
+  measure-delay-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The value of measure delay time. Before X-axis or Y-axis measurement,
+      the screen need some time before even potential distribution ready.
+    default: 0xffff
+    minimum: 0
+    maximum: 0xffffff
+
+  pre-charge-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The touch screen need some time to precharge.
+    default: 0xfff
+    minimum: 0
+    maximum: 0xffffffff
+
+  touchscreen-average-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of data samples which are averaged for each read.
+    enum: [ 1, 4, 8, 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - xnur-gpios
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    touchscreen@2040000 {
+        compatible = "fsl,imx6ul-tsc";
+        reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6UL_CLK_IPG>,
+                 <&clks IMX6UL_CLK_ADC2>;
+        clock-names = "tsc", "adc";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_tsc>;
+        xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+        measure-delay-time = <0xfff>;
+        pre-charge-time = <0xffff>;
+        touchscreen-average-samples = <32>;
+    };
diff --git a/Bindings/input/touchscreen/goodix,gt9916.yaml b/Bindings/input/touchscreen/goodix,gt9916.yaml
new file mode 100644
index 0000000000..d90f045ac0
--- /dev/null
+++ b/Bindings/input/touchscreen/goodix,gt9916.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix Berlin series touchscreen controller
+
+description: The Goodix Berlin series of touchscreen controllers
+  be connected to either I2C or SPI buses.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt9916
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply regulator on AVDD pin
+
+  vddio-supply:
+    description: power supply regulator on VDDIO pin
+
+  spi-max-frequency: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@5d {
+        compatible = "goodix,gt9916";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      touchscreen@0 {
+        compatible = "goodix,gt9916";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        spi-max-frequency = <1000000>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+
+...
diff --git a/Bindings/input/touchscreen/goodix.yaml b/Bindings/input/touchscreen/goodix.yaml
index 3d016b87c8..2a2d86cfd1 100644
--- a/Bindings/input/touchscreen/goodix.yaml
+++ b/Bindings/input/touchscreen/goodix.yaml
@@ -37,8 +37,9 @@ properties:
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
-      as output to reset the device.
+    description: GPIO pin used for IRQ input. Additionally, this line is
+      sampled by the device on reset deassertion to select the I2C client
+      address, thus it can be driven by the host during the reset sequence.
     maxItems: 1
 
   reset-gpios:
diff --git a/Bindings/input/touchscreen/imagis,ist3038c.yaml b/Bindings/input/touchscreen/imagis,ist3038c.yaml
index 0d6b033fd5..77ba280b3b 100644
--- a/Bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/Bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -9,15 +9,14 @@ title: Imagis IST30XXC family touchscreen controller
 maintainers:
   - Markuss Broks <markuss.broks@gmail.com>
 
-allOf:
-  - $ref: touchscreen.yaml#
-
 properties:
   $nodename:
     pattern: "^touchscreen@[0-9a-f]+$"
 
   compatible:
     enum:
+      - imagis,ist3032c
+      - imagis,ist3038b
       - imagis,ist3038c
 
   reg:
@@ -32,6 +31,10 @@ properties:
   vddio-supply:
     description: Power supply regulator for the I2C bus
 
+  linux,keycodes:
+    description: Keycodes for the touch keys
+    maxItems: 5
+
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-fuzz-x: true
@@ -42,6 +45,18 @@ properties:
 
 additionalProperties: false
 
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: imagis,ist3032c
+    then:
+      properties:
+        linux,keycodes: false
+
 required:
   - compatible
   - reg
diff --git a/Bindings/input/touchscreen/imx6ul_tsc.txt b/Bindings/input/touchscreen/imx6ul_tsc.txt
deleted file mode 100644
index 1649150044..0000000000
--- a/Bindings/input/touchscreen/imx6ul_tsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale i.MX6UL Touch Controller
-
-Required properties:
-- compatible: must be "fsl,imx6ul-tsc".
-- reg: this touch controller address and the ADC2 address.
-- interrupts: the interrupt of this touch controller and ADC2.
-- clocks: the root clock of touch controller and ADC2.
-- clock-names; must be "tsc" and "adc".
-- xnur-gpio: the X- gpio this controller connect to.
-  This xnur-gpio returns to low once the finger leave the touch screen (The
-  last touch event the touch controller capture).
-
-Optional properties:
-- measure-delay-time: the value of measure delay time.
-  Before X-axis or Y-axis measurement, the screen need some time before
-  even potential distribution ready.
-  This value depends on the touch screen.
-- pre-charge-time: the touch screen need some time to precharge.
-  This value depends on the touch screen.
-- touchscreen-average-samples: Number of data samples which are averaged for
-  each read. Valid values are 1, 4, 8, 16 and 32.
-
-Example:
-	tsc: tsc@2040000 {
-		compatible = "fsl,imx6ul-tsc";
-		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6UL_CLK_IPG>,
-			 <&clks IMX6UL_CLK_ADC2>;
-		clock-names = "tsc", "adc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc>;
-		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		measure-delay-time = <0xfff>;
-		pre-charge-time = <0xffff>;
-		touchscreen-average-samples = <32>;
-	};
diff --git a/Bindings/input/touchscreen/melfas,mms114.yaml b/Bindings/input/touchscreen/melfas,mms114.yaml
index 07f9dd6b1c..90ebd4f835 100644
--- a/Bindings/input/touchscreen/melfas,mms114.yaml
+++ b/Bindings/input/touchscreen/melfas,mms114.yaml
@@ -17,13 +17,17 @@ properties:
     pattern: "^touchscreen(@.*)?$"
 
   compatible:
-    items:
+    oneOf:
       - enum:
           - melfas,mms114
           - melfas,mms134s
           - melfas,mms136
           - melfas,mms152
           - melfas,mms345l
+      - items:
+          - enum:
+              - melfas,mms252
+          - const: melfas,mms114
 
   reg:
     description: I2C address
diff --git a/Bindings/input/touchscreen/silead,gsl1680.yaml b/Bindings/input/touchscreen/silead,gsl1680.yaml
index 95b554be25..5381a96f49 100644
--- a/Bindings/input/touchscreen/silead,gsl1680.yaml
+++ b/Bindings/input/touchscreen/silead,gsl1680.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: >
       File basename for board specific firmware
 
diff --git a/Bindings/interconnect/qcom,rpm.yaml b/Bindings/interconnect/qcom,rpm.yaml
index 08c1c6b9d7..5aaa92a7ce 100644
--- a/Bindings/interconnect/qcom,rpm.yaml
+++ b/Bindings/interconnect/qcom,rpm.yaml
@@ -23,6 +23,9 @@ properties:
 
   compatible:
     enum:
+      - qcom,msm8909-bimc
+      - qcom,msm8909-pcnoc
+      - qcom,msm8909-snoc
       - qcom,msm8916-bimc
       - qcom,msm8916-pcnoc
       - qcom,msm8916-snoc
diff --git a/Bindings/interconnect/qcom,rpmh.yaml b/Bindings/interconnect/qcom,rpmh.yaml
index 74ab080249..9318b845ec 100644
--- a/Bindings/interconnect/qcom,rpmh.yaml
+++ b/Bindings/interconnect/qcom,rpmh.yaml
@@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
-  - Odelu Kukatla <okukatla@codeaurora.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
 
 description: |
    RPMh interconnect providers support system bandwidth requirements through
diff --git a/Bindings/interconnect/qcom,sm7150-rpmh.yaml b/Bindings/interconnect/qcom,sm7150-rpmh.yaml
new file mode 100644
index 0000000000..b565d1a382
--- /dev/null
+++ b/Bindings/interconnect/qcom,sm7150-rpmh.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm7150-aggre1-noc
+      - qcom,sm7150-aggre2-noc
+      - qcom,sm7150-compute-noc
+      - qcom,sm7150-config-noc
+      - qcom,sm7150-dc-noc
+      - qcom,sm7150-gem-noc
+      - qcom,sm7150-mc-virt
+      - qcom,sm7150-mmss-noc
+      - qcom,sm7150-system-noc
+
+  reg:
+    maxItems: 1
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm7150-camnoc-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mc_virt: interconnect@1380000 {
+        compatible = "qcom,sm7150-mc-virt";
+        reg = <0x01380000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm7150-system-noc";
+        reg = <0x01620000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        camnoc_virt: interconnect-0 {
+            compatible = "qcom,sm7150-camnoc-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
index 3d06db98e9..a937447637 100644
--- a/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
+++ b/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -36,6 +36,7 @@ properties:
               - amlogic,meson-a1-gpio-intc
               - amlogic,meson-s4-gpio-intc
               - amlogic,c3-gpio-intc
+              - amlogic,t7-gpio-intc
           - const: amlogic,meson-gpio-intc
 
   reg:
diff --git a/Bindings/interrupt-controller/atmel,aic.txt b/Bindings/interrupt-controller/atmel,aic.txt
deleted file mode 100644
index 7079d44bf3..0000000000
--- a/Bindings/interrupt-controller/atmel,aic.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Advanced Interrupt Controller (AIC)
-
-Required properties:
-- compatible: Should be:
-    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
-      "sama5d3" or "sama5d4"
-    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
-
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
-  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-      Default flag for internal sources should be set to 4 (active high).
-  The third cell is used to specify the irq priority from 0 (lowest) to 7
-  (highest).
-- reg: Should contain AIC registers location and length
-- atmel,external-irqs: u32 array of external irqs.
-
-Examples:
-	/*
-	 * AIC
-	 */
-	aic: interrupt-controller@fffff000 {
-		compatible = "atmel,at91rm9200-aic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xfffff000 0x200>;
-	};
-
-	/*
-	 * An interrupt generating device that is wired to an AIC.
-	 */
-	dma: dma-controller@ffffec00 {
-		compatible = "atmel,at91sam9g45-dma";
-		reg = <0xffffec00 0x200>;
-		interrupts = <21 4 5>;
-	};
diff --git a/Bindings/interrupt-controller/atmel,aic.yaml b/Bindings/interrupt-controller/atmel,aic.yaml
new file mode 100644
index 0000000000..d4658fe386
--- /dev/null
+++ b/Bindings/interrupt-controller/atmel,aic.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advanced Interrupt Controller (AIC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Advanced Interrupt Controller (AIC) is an 8-level priority, individually
+  maskable, vectored interrupt controller providing handling of up to one
+  hundred and twenty-eight interrupt sources.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-aic
+      - atmel,sama5d2-aic
+      - atmel,sama5d3-aic
+      - atmel,sama5d4-aic
+      - microchip,sam9x60-aic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the IRQ number (Peripheral IDentifier on datasheet).
+      The 2nd cell specifies flags:
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+        Valid combinations: 1, 2, 3, 4, 8.
+        Default for internal sources: 4 (active high).
+      The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest).
+
+  interrupts:
+    maxItems: 1
+
+  atmel,external-irqs:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: u32 array of external irqs.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91rm9200-aic
+    then:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 7
+    else:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - atmel,external-irqs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@fffff000 {
+      compatible = "atmel,at91rm9200-aic";
+      reg = <0xfffff000 0x200>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      atmel,external-irqs = <31>;
+    };
+...
diff --git a/Bindings/interrupt-controller/fsl,intmux.yaml b/Bindings/interrupt-controller/fsl,intmux.yaml
index 985bfa4f6f..78baa0a571 100644
--- a/Bindings/interrupt-controller/fsl,intmux.yaml
+++ b/Bindings/interrupt-controller/fsl,intmux.yaml
@@ -37,6 +37,9 @@ properties:
   clock-names:
     const: ipg
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
new file mode 100644
index 0000000000..e1a379c052
--- /dev/null
+++ b/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mt6577-sysirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek sysirq
+
+description:
+  MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
+  interrupt.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-sysirq
+      - items:
+          - enum:
+              - mediatek,mt2701-sysirq
+              - mediatek,mt2712-sysirq
+              - mediatek,mt6580-sysirq
+              - mediatek,mt6582-sysirq
+              - mediatek,mt6589-sysirq
+              - mediatek,mt6592-sysirq
+              - mediatek,mt6755-sysirq
+              - mediatek,mt6765-sysirq
+              - mediatek,mt6779-sysirq
+              - mediatek,mt6795-sysirq
+              - mediatek,mt6797-sysirq
+              - mediatek,mt7622-sysirq
+              - mediatek,mt7623-sysirq
+              - mediatek,mt7629-sysirq
+              - mediatek,mt8127-sysirq
+              - mediatek,mt8135-sysirq
+              - mediatek,mt8173-sysirq
+              - mediatek,mt8183-sysirq
+              - mediatek,mt8365-sysirq
+              - mediatek,mt8516-sysirq
+          - const: mediatek,mt6577-sysirq
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    $ref: "arm,gic.yaml#/properties/#interrupt-cells"
+
+required:
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6797-sysirq
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@10200620 {
+        compatible = "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq";
+        reg = <0x10220620 0x20>,
+              <0x10220690 0x10>;
+        interrupt-parent = <&gic>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git a/Bindings/interrupt-controller/mediatek,sysirq.txt b/Bindings/interrupt-controller/mediatek,sysirq.txt
deleted file mode 100644
index 3ffc60184e..0000000000
--- a/Bindings/interrupt-controller/mediatek,sysirq.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-MediaTek sysirq
-
-MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
-interrupt.
-
-Required properties:
-- compatible: should be
-	"mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
-	"mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
-	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
-	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
-	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
-	"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
-	"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
-	"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
-	"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
-	"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
-	"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
-	"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
-	"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
-	"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
-	"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
-	"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
-	"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
-	"mediatek,mt6577-sysirq": for MT6577
-	"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
-	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
-	"mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the intpol registers and length of memory
-  mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
-  need 1.
-
-Example:
-	sysirq: intpol-controller@10200620 {
-		compatible = "mediatek,mt6797-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10220620 0 0x20>,
-		      <0 0x10220690 0 0x10>;
-	};
diff --git a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index d3b5aec0a3..daef4ee06f 100644
--- a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -44,7 +44,7 @@ properties:
     maxItems: 1
 
   interrupts:
-    minItems: 41
+    minItems: 45
     items:
       - description: NMI interrupt
       - description: IRQ0 interrupt
@@ -88,9 +88,15 @@ properties:
       - description: GPIO interrupt, TINT30
       - description: GPIO interrupt, TINT31
       - description: Bus error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt
+      - description: ECCRAM1 1bit error interrupt
+      - description: ECCRAM1 2bit error interrupt
+      - description: ECCRAM1 error overflow interrupt
 
   interrupt-names:
-    minItems: 41
+    minItems: 45
     items:
       - const: nmi
       - const: irq0
@@ -134,6 +140,12 @@ properties:
       - const: tint30
       - const: tint31
       - const: bus-err
+      - const: ec7tie1-0
+      - const: ec7tie2-0
+      - const: ec7tiovf-0
+      - const: ec7tie1-1
+      - const: ec7tie2-1
+      - const: ec7tiovf-1
 
   clocks:
     maxItems: 2
@@ -156,6 +168,7 @@ required:
   - interrupt-controller
   - reg
   - interrupts
+  - interrupt-names
   - clocks
   - clock-names
   - power-domains
@@ -169,16 +182,19 @@ allOf:
         compatible:
           contains:
             enum:
-              - renesas,r9a07g043u-irqc
               - renesas,r9a08g045-irqc
     then:
       properties:
         interrupts:
-          minItems: 42
+          maxItems: 45
         interrupt-names:
-          minItems: 42
-      required:
-        - interrupt-names
+          maxItems: 45
+    else:
+      properties:
+        interrupts:
+          minItems: 48
+        interrupt-names:
+          minItems: 48
 
 unevaluatedProperties: false
 
@@ -233,7 +249,14 @@ examples:
                      <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
         interrupt-names = "nmi",
                           "irq0", "irq1", "irq2", "irq3",
                           "irq4", "irq5", "irq6", "irq7",
@@ -244,7 +267,10 @@ examples:
                           "tint16", "tint17", "tint18", "tint19",
                           "tint20", "tint21", "tint22", "tint23",
                           "tint24", "tint25", "tint26", "tint27",
-                          "tint28", "tint29", "tint30", "tint31";
+                          "tint28", "tint29", "tint30", "tint31",
+                          "bus-err", "ec7tie1-0", "ec7tie2-0",
+                          "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+                          "ec7tiovf-1";
         clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
                  <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
         clock-names = "clk", "pclk";
diff --git a/Bindings/interrupt-controller/starfive,jh8100-intc.yaml b/Bindings/interrupt-controller/starfive,jh8100-intc.yaml
new file mode 100644
index 0000000000..ada5788602
--- /dev/null
+++ b/Bindings/interrupt-controller/starfive,jh8100-intc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/starfive,jh8100-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive External Interrupt Controller
+
+description:
+  StarFive SoC JH8100 contain a external interrupt controller. It can be used
+  to handle high-level input interrupt signals. It also send the output
+  interrupt signal to RISC-V PLIC.
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh8100-intc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: APB clock for the interrupt controller
+    maxItems: 1
+
+  resets:
+    description: APB reset for the interrupt controller
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@12260000 {
+      compatible = "starfive,jh8100-intc";
+      reg = <0x12260000 0x10000>;
+      clocks = <&syscrg_ne 76>;
+      resets = <&syscrg_ne 13>;
+      interrupts = <45>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Bindings/iommu/arm,smmu.yaml b/Bindings/iommu/arm,smmu.yaml
index a4042ae247..5c130cf06a 100644
--- a/Bindings/iommu/arm,smmu.yaml
+++ b/Bindings/iommu/arm,smmu.yaml
@@ -83,6 +83,7 @@ properties:
       - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
+              - qcom,qcm2290-smmu-500
               - qcom,sa8775p-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8280xp-smmu-500
@@ -93,6 +94,7 @@ properties:
               - qcom,sm8350-smmu-500
               - qcom,sm8450-smmu-500
               - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
           - const: qcom,adreno-smmu
           - const: qcom,smmu-500
           - const: arm,mmu-500
@@ -462,6 +464,7 @@ allOf:
         compatible:
           items:
             - enum:
+                - qcom,qcm2290-smmu-500
                 - qcom,sm6115-smmu-500
                 - qcom,sm6125-smmu-500
             - const: qcom,adreno-smmu
@@ -484,7 +487,12 @@ allOf:
   - if:
       properties:
         compatible:
-          const: qcom,sm8450-smmu-500
+          items:
+            - const: qcom,sm8450-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+
     then:
       properties:
         clock-names:
@@ -508,7 +516,13 @@ allOf:
   - if:
       properties:
         compatible:
-          const: qcom,sm8550-smmu-500
+          items:
+            - enum:
+                - qcom,sm8550-smmu-500
+                - qcom,sm8650-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
     then:
       properties:
         clock-names:
@@ -534,7 +548,6 @@ allOf:
               - cavium,smmu-v2
               - marvell,ap806-smmu-500
               - nvidia,smmu-500
-              - qcom,qcm2290-smmu-500
               - qcom,qdu1000-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc8180x-smmu-500
@@ -544,7 +557,6 @@ allOf:
               - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
-              - qcom,sm8650-smmu-500
               - qcom,x1e80100-smmu-500
     then:
       properties:
diff --git a/Bindings/leds/backlight/kinetic,ktd2801.yaml b/Bindings/leds/backlight/kinetic,ktd2801.yaml
new file mode 100644
index 0000000000..b005065e0f
--- /dev/null
+++ b/Bindings/leds/backlight/kinetic,ktd2801.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD2801 one-wire backlight
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The Kinetic Technologies KTD2801 is a LED backlight driver controlled
+  by a single GPIO line. The driver can be controlled with a PWM signal
+  or by pulsing the GPIO line to set the backlight level. This is called
+  "ExpressWire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd2801
+
+  ctrl-gpios:
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktd2801";
+        ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+        max-brightness = <210>;
+        default-brightness = <100>;
+    };
diff --git a/Bindings/leds/backlight/qcom-wled.yaml b/Bindings/leds/backlight/qcom-wled.yaml
index 5f1849bdab..a849078101 100644
--- a/Bindings/leds/backlight/qcom-wled.yaml
+++ b/Bindings/leds/backlight/qcom-wled.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Kiran Gunda <kgunda@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
+  - Kiran Gunda <quic_kgunda@quicinc.com>
 
 description: |
   WLED (White Light Emitting Diode) driver is used for controlling display
diff --git a/Bindings/leds/common.yaml b/Bindings/leds/common.yaml
index 55a8d1385e..8a3c2398b1 100644
--- a/Bindings/leds/common.yaml
+++ b/Bindings/leds/common.yaml
@@ -200,6 +200,18 @@ properties:
       #trigger-source-cells property in the source node.
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  active-low:
+    type: boolean
+    description:
+      Makes LED active low. To turn the LED ON, line needs to be
+      set to low voltage instead of high.
+
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
diff --git a/Bindings/leds/leds-bcm63138.yaml b/Bindings/leds/leds-bcm63138.yaml
index 52252fb6bb..bb20394fca 100644
--- a/Bindings/leds/leds-bcm63138.yaml
+++ b/Bindings/leds/leds-bcm63138.yaml
@@ -52,10 +52,6 @@ patternProperties:
         maxItems: 1
         description: LED pin number
 
-      active-low:
-        type: boolean
-        description: Makes LED active low
-
     required:
       - reg
 
diff --git a/Bindings/leds/leds-bcm6328.yaml b/Bindings/leds/leds-bcm6328.yaml
index 51cc0d82c1..f3a3ef9929 100644
--- a/Bindings/leds/leds-bcm6328.yaml
+++ b/Bindings/leds/leds-bcm6328.yaml
@@ -78,10 +78,6 @@ patternProperties:
           - maximum: 23
         description: LED pin number (only LEDs 0 to 23 are valid).
 
-      active-low:
-        type: boolean
-        description: Makes LED active low.
-
       brcm,hardware-controlled:
         type: boolean
         description: Makes this LED hardware controlled.
diff --git a/Bindings/leds/leds-bcm6358.txt b/Bindings/leds/leds-bcm6358.txt
index 6e51c6b91e..211ffc3c4a 100644
--- a/Bindings/leds/leds-bcm6358.txt
+++ b/Bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@ LED sub-node required properties:
 
 LED sub-node optional properties:
   - label : see Documentation/devicetree/bindings/leds/common.txt
-  - active-low : Boolean, makes LED active low.
-    Default : false
   - default-state : see
     Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
diff --git a/Bindings/leds/leds-pwm-multicolor.yaml b/Bindings/leds/leds-pwm-multicolor.yaml
index bd6ec04a87..a31a202afe 100644
--- a/Bindings/leds/leds-pwm-multicolor.yaml
+++ b/Bindings/leds/leds-pwm-multicolor.yaml
@@ -41,9 +41,7 @@ properties:
 
           pwm-names: true
 
-          active-low:
-            description: For PWMs where the LED is wired to supply rather than ground.
-            type: boolean
+          active-low: true
 
           color: true
 
diff --git a/Bindings/leds/leds-pwm.yaml b/Bindings/leds/leds-pwm.yaml
index 7de6da58be..113b7c2183 100644
--- a/Bindings/leds/leds-pwm.yaml
+++ b/Bindings/leds/leds-pwm.yaml
@@ -34,11 +34,6 @@ patternProperties:
           Maximum brightness possible for the LED
         $ref: /schemas/types.yaml#/definitions/uint32
 
-      active-low:
-        description:
-          For PWMs where the LED is wired to supply rather than ground.
-        type: boolean
-
     required:
       - pwms
       - max-brightness
diff --git a/Bindings/leds/leds-qcom-lpg.yaml b/Bindings/leds/leds-qcom-lpg.yaml
index ea84ad426d..54a428d3d4 100644
--- a/Bindings/leds/leds-qcom-lpg.yaml
+++ b/Bindings/leds/leds-qcom-lpg.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: >
   The Qualcomm Light Pulse Generator consists of three different hardware blocks;
-  a ramp generator with lookup table, the light pulse generator and a three
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
   channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
 
 properties:
@@ -63,6 +63,29 @@ properties:
         - description: dtest line to attach
         - description: flags for the attachment
 
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    items:
+      - const: lpg_chan_sdam
+      - const: lut_sdam
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
   multi-led:
     type: object
     $ref: leds-class-multicolor.yaml#
@@ -106,6 +129,52 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-lpg
+              - qcom,pm8150b-lpg
+              - qcom,pm8150l-lpg
+              - qcom,pm8916-pwm
+              - qcom,pm8941-lpg
+              - qcom,pm8994-lpg
+              - qcom,pmc8180c-lpg
+              - qcom,pmi8994-lpg
+              - qcom,pmi8998-lpg
+              - qcom,pmk8550-pwm
+    then:
+      properties:
+        nvmem: false
+        nvmem-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          minItems: 2
+
 examples:
   - |
     #include <dt-bindings/leds/common.h>
@@ -191,4 +260,35 @@ examples:
       compatible = "qcom,pm8916-pwm";
       #pwm-cells = <2>;
     };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
+
 ...
diff --git a/Bindings/leds/onnn,ncp5623.yaml b/Bindings/leds/onnn,ncp5623.yaml
new file mode 100644
index 0000000000..9c9f3a682b
--- /dev/null
+++ b/Bindings/leds/onnn,ncp5623.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NCP5623 multi-LED Driver
+
+maintainers:
+  - Abdel Alkuor <alkuor@gmail.com>
+
+description:
+  NCP5623 Triple Output I2C Controlled LED Driver.
+  https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+
+properties:
+  compatible:
+    enum:
+      - onnn,ncp5623
+
+  reg:
+    const: 0x38
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 2
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - multi-led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+            compatible = "onnn,ncp5623";
+            reg = <0x38>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/mailbox/fsl,mu.yaml b/Bindings/mailbox/fsl,mu.yaml
index 12e7a7d536..00631afcd5 100644
--- a/Bindings/mailbox/fsl,mu.yaml
+++ b/Bindings/mailbox/fsl,mu.yaml
@@ -29,8 +29,11 @@ properties:
       - const: fsl,imx8ulp-mu
       - const: fsl,imx8-mu-scu
       - const: fsl,imx8-mu-seco
-      - const: fsl,imx93-mu-s4
       - const: fsl,imx8ulp-mu-s4
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx95-mu
+      - const: fsl,imx95-mu-ele
+      - const: fsl,imx95-mu-v2x
       - items:
           - const: fsl,imx93-mu
           - const: fsl,imx8ulp-mu
@@ -95,6 +98,19 @@ properties:
   power-domains:
     maxItems: 1
 
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^sram@[a-f0-9]+":
+    $ref: /schemas/sram/sram.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -122,6 +138,15 @@ allOf:
         required:
           - interrupt-names
 
+  - if:
+      not:
+        properties:
+          compatible:
+            const: fsl,imx95-mu
+    then:
+      patternProperties:
+        "^sram@[a-f0-9]+": false
+
 additionalProperties: false
 
 examples:
@@ -134,3 +159,34 @@ examples:
         interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
         #mbox-cells = <2>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@445b0000 {
+        compatible = "fsl,imx95-mu";
+        reg = <0x445b0000 0x10000>;
+        ranges;
+        interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #mbox-cells = <2>;
+
+        sram@445b1000 {
+            compatible = "mmio-sram";
+            reg = <0x445b1000 0x400>;
+            ranges = <0x0 0x445b1000 0x400>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            scmi-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+
+            scmi-sram-section@80 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x80 0x80>;
+            };
+        };
+    };
diff --git a/Bindings/media/i2c/techwell,tw9900.yaml b/Bindings/media/i2c/techwell,tw9900.yaml
index e37317f810..c9673391af 100644
--- a/Bindings/media/i2c/techwell,tw9900.yaml
+++ b/Bindings/media/i2c/techwell,tw9900.yaml
@@ -36,7 +36,7 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: Analog input port
 
         properties:
diff --git a/Bindings/media/mediatek,vcodec-encoder.yaml b/Bindings/media/mediatek,vcodec-encoder.yaml
index a2051b31fa..b45743d0a9 100644
--- a/Bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Bindings/media/mediatek,vcodec-encoder.yaml
@@ -16,14 +16,18 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8173-vcodec-enc-vp8
-      - mediatek,mt8173-vcodec-enc
-      - mediatek,mt8183-vcodec-enc
-      - mediatek,mt8188-vcodec-enc
-      - mediatek,mt8192-vcodec-enc
-      - mediatek,mt8195-vcodec-enc
-
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+      - items:
+          - const: mediatek,mt8186-vcodec-enc
+          - const: mediatek,mt8183-vcodec-enc
   reg:
     maxItems: 1
 
@@ -109,10 +113,7 @@ allOf:
       properties:
         compatible:
           enum:
-            - mediatek,mt8173-vcodec-enc
-            - mediatek,mt8188-vcodec-enc
-            - mediatek,mt8192-vcodec-enc
-            - mediatek,mt8195-vcodec-enc
+            - mediatek,mt8173-vcodec-enc-vp8
 
     then:
       properties:
@@ -122,8 +123,8 @@ allOf:
             maxItems: 1
         clock-names:
           items:
-            - const: venc_sel
-    else:  # for vp8 hw encoder
+            - const: venc_lt_sel
+    else:
       properties:
         clock:
           items:
@@ -131,7 +132,7 @@ allOf:
             maxItems: 1
         clock-names:
           items:
-            - const: venc_lt_sel
+            - const: venc_sel
 
 additionalProperties: false
 
diff --git a/Bindings/media/mediatek-jpeg-encoder.yaml b/Bindings/media/mediatek-jpeg-encoder.yaml
index 37800e1908..83c020a673 100644
--- a/Bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Bindings/media/mediatek-jpeg-encoder.yaml
@@ -38,7 +38,8 @@ properties:
     maxItems: 1
 
   iommus:
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
     description: |
       Points to the respective IOMMU block with master port as argument, see
       Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
diff --git a/Bindings/media/rockchip-isp1.yaml b/Bindings/media/rockchip-isp1.yaml
index afcaa427d4..6be00aca41 100644
--- a/Bindings/media/rockchip-isp1.yaml
+++ b/Bindings/media/rockchip-isp1.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx8mp-isp
       - rockchip,px30-cif-isp
       - rockchip,rk3399-cif-isp
 
@@ -36,9 +37,9 @@ properties:
     minItems: 3
     items:
       # isp0 and isp1
-      - description: ISP clock
-      - description: ISP AXI clock
-      - description: ISP AHB clock
+      - description: ISP clock (for imx8mp, clk)
+      - description: ISP AXI clock (for imx8mp, m_hclk)
+      - description: ISP AHB clock (for imx8mp, hclk)
       # only for isp1
       - description: ISP Pixel clock
 
@@ -52,6 +53,13 @@ properties:
       # only for isp1
       - const: pclk
 
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to the media block control for the ISP, followed by a cell
+      containing the index of the gasket.
+
   iommus:
     maxItems: 1
 
@@ -113,9 +121,6 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - iommus
-  - phys
-  - phy-names
   - power-domains
   - ports
 
@@ -143,6 +148,26 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isp
+    then:
+      properties:
+        iommus: false
+        phys: false
+        phy-names: false
+      required:
+        - fsl,blk-ctrl
+    else:
+      properties:
+        fsl,blk-ctrl: false
+      required:
+        - iommus
+        - phys
+        - phy-names
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/media/st,stm32mp25-video-codec.yaml b/Bindings/media/st,stm32mp25-video-codec.yaml
new file mode 100644
index 0000000000..b8611bc875
--- /dev/null
+++ b/Bindings/media/st,stm32mp25-video-codec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+
+description:
+  The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware
+  decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1)
+  and a VENC video hardware encoder peripheral based on Verisilicon
+  VC8000NanoE IP (former Hantro H1).
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-vdec
+      - st,stm32mp25-venc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    video-codec@580d0000 {
+        compatible = "st,stm32mp25-vdec";
+        reg = <0x580d0000 0x3c8>;
+        interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ck_icn_p_vdec>;
+    };
diff --git a/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml b/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
new file mode 100644
index 0000000000..82fc5f4a1e
--- /dev/null
+++ b/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX WEIM Bus Peripheral Nodes
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This binding is meant for the child nodes of the WEIM node. The node
+  represents any device connected to the WEIM bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the WEIM settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+  fsl,weim-cs-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Timing values for the child node.
+    minItems: 2
+    maxItems: 6
+
+# the WEIM child will have its own native properties
+additionalProperties: true
diff --git a/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml b/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml
new file mode 100644
index 0000000000..3f40ca5b13
--- /dev/null
+++ b/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX Wireless External Interface Module (WEIM)
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  The term "wireless" does not imply that the WEIM is literally an interface
+  without wires. It simply means that this module was originally designed for
+  wireless and mobile applications that use low-power technology. The actual
+  devices are instantiated from the child nodes of a WEIM node.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-weim
+          - fsl,imx27-weim
+          - fsl,imx50-weim
+          - fsl,imx51-weim
+          - fsl,imx6q-weim
+      - items:
+          - enum:
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+          - const: fsl,imx27-weim
+      - items:
+          - enum:
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+          - const: fsl,imx6q-weim
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+  fsl,weim-cs-gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system General Purpose Register controller that contains
+      WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
+      should be set up as one of the following 4 possible values depending on
+      the CS space configuration.
+
+      IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+      ---------------------------------------------
+              05          128M     0M     0M     0M
+              033          64M    64M     0M     0M
+              0113         64M    32M    32M     0M
+              01111        32M    32M    32M    32M
+
+      In case that the property is absent, the reset value or what bootloader
+      sets up in IOMUXC_GPR1[11:0] will be used.
+
+  fsl,burst-clk-enable:
+    type: boolean
+    description:
+      The presence of this property indicates that the weim bus should operate
+      in Burst Clock Mode.
+
+  fsl,continuous-burst-clk:
+    type: boolean
+    description:
+      Make Burst Clock to output continuous clock. Without this option Burst
+      Clock will output clock only when necessary.
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    type: object
+    description: Devices attached to chip selects are represented as subnodes.
+    $ref: fsl,imx-weim-peripherals.yaml
+    additionalProperties: true
+    required:
+      - fsl,weim-cs-timing
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx50-weim
+                - fsl,imx6q-weim
+    then:
+      properties:
+        fsl,weim-cs-gpr: false
+        fsl,burst-clk-enable: false
+  - if:
+      not:
+        required:
+          - fsl,burst-clk-enable
+    then:
+      properties:
+        fsl,continuous-burst-clk: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx1-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSxU
+                  - description: CSxL
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx27-weim
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSCRxU
+                  - description: CSCRxL
+                  - description: CSCRxA
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx50-weim
+              - fsl,imx51-weim
+              - fsl,imx6q-weim
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSxGCR1
+                  - description: CSxGCR2
+                  - description: CSxRCR1
+                  - description: CSxRCR2
+                  - description: CSxWCR1
+                  - description: CSxWCR2
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@21b8000 {
+        compatible = "fsl,imx6q-weim";
+        reg = <0x021b8000 0x4000>;
+        clocks = <&clks 196>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x08000000 0x08000000>;
+        fsl,weim-cs-gpr = <&gpr>;
+
+        flash@0,0 {
+            compatible = "cfi-flash";
+            reg = <0 0 0x02000000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            bank-width = <2>;
+            fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+                                  0x0000c000 0x1404a38e 0x00000000>;
+        };
+    };
diff --git a/Bindings/memory-controllers/mc-peripheral-props.yaml b/Bindings/memory-controllers/mc-peripheral-props.yaml
index 8d9dae15ad..00deeb09f8 100644
--- a/Bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Bindings/memory-controllers/mc-peripheral-props.yaml
@@ -37,5 +37,6 @@ allOf:
   - $ref: ingenic,nemc-peripherals.yaml#
   - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
   - $ref: ti,gpmc-child.yaml#
+  - $ref: fsl/fsl,imx-weim-peripherals.yaml
 
 additionalProperties: true
diff --git a/Bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Bindings/memory-controllers/nvidia,tegra20-emc.yaml
index f54e553e6c..71896cb106 100644
--- a/Bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -145,7 +145,7 @@ patternProperties:
   "^emc-table@[0-9]+$":
     $ref: "#/$defs/emc-table"
 
-  "^emc-tables@[a-z0-9-]+$":
+  "^emc-tables@[a-f0-9-]+$":
     type: object
     properties:
       reg:
diff --git a/Bindings/memory-controllers/renesas,rpc-if.yaml b/Bindings/memory-controllers/renesas,rpc-if.yaml
index 25f3bb9890..d7745dd53b 100644
--- a/Bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Bindings/memory-controllers/renesas,rpc-if.yaml
@@ -45,6 +45,7 @@ properties:
       - items:
           - enum:
               - renesas,r8a779g0-rpc-if       # R-Car V4H
+              - renesas,r8a779h0-rpc-if       # R-Car V4M
           - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
 
       - items:
diff --git a/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 14f1833d37..84ac6f50a6 100644
--- a/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -23,7 +23,9 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32mp1-fmc2-ebi
+    enum:
+      - st,stm32mp1-fmc2-ebi
+      - st,stm32mp25-fmc2-ebi
 
   reg:
     maxItems: 1
@@ -34,6 +36,9 @@ properties:
   resets:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   "#address-cells":
     const: 2
 
diff --git a/Bindings/mfd/atmel,hlcdc.yaml b/Bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 0000000000..4aa36903e7
--- /dev/null
+++ b/Bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };
diff --git a/Bindings/mfd/atmel,sama5d2-flexcom.yaml b/Bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 0000000000..0dc6a40b63
--- /dev/null
+++ b/Bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sam9x7-flexcom
+          - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sama7g5-flexcom
+          - const: atmel,sama5d2-flexcom
+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...
diff --git a/Bindings/mfd/atmel-flexcom.txt b/Bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index af692e8833..0000000000
--- a/Bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
-			or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
-- reg:			Should be the offset/length value for Flexcom dedicated
-			I/O registers (without USART, TWI or SPI registers).
-- clocks:		Should be the Flexcom peripheral clock from PMC.
-- #address-cells:	Should be <1>
-- #size-cells:		Should be <1>
-- ranges:		Should be one range for the full I/O register region
-			(including USART, TWI and SPI registers).
-- atmel,flexcom-mode:	Should be one of the following values:
-			- <1> for USART
-			- <2> for SPI
-			- <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
-	compatible = "atmel,sama5d2-flexcom";
-	reg = <0xf8034000 0x200>;
-	clocks = <&flx0_clk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0xf8034000 0x800>;
-	atmel,flexcom-mode = <2>;
-
-	spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&flx0_clk>;
-		clock-names = "spi_clk";
-		atmel,fifo-size = <32>;
-
-		flash@0 {
-			compatible = "atmel,at25f512b";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-};
diff --git a/Bindings/mfd/atmel-hlcdc.txt b/Bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 7de696eefa..0000000000
--- a/Bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,at91sam9n12-hlcdc"
-   "atmel,at91sam9x5-hlcdc"
-   "atmel,sama5d2-hlcdc"
-   "atmel,sama5d3-hlcdc"
-   "atmel,sama5d4-hlcdc"
-   "microchip,sam9x60-hlcdc"
-   "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
-   Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git a/Bindings/mfd/da9062.txt b/Bindings/mfd/da9062.txt
deleted file mode 100644
index e4eedd3bd2..0000000000
--- a/Bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-wdt.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Bindings/mfd/dlg,da9063.yaml b/Bindings/mfd/dlg,da9063.yaml
index c5a7e10d7d..51612dc227 100644
--- a/Bindings/mfd/dlg,da9063.yaml
+++ b/Bindings/mfd/dlg,da9063.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -17,10 +17,17 @@ description: |
   moment where all voltage monitors are disabled. Next, as da9063 only supports
   UV *and* OV monitoring, both must be set to the same severity and value
   (0: disable, 1: enable).
+  Product information for the DA906{3L,3,2,1} devices can be found here:
+  - https://www.dialog-semiconductor.com/products/da9063l
+  - https://www.dialog-semiconductor.com/products/da9063
+  - https://www.dialog-semiconductor.com/products/da9062
+  - https://www.dialog-semiconductor.com/products/da9061
 
 properties:
   compatible:
     enum:
+      - dlg,da9061
+      - dlg,da9062
       - dlg,da9063
       - dlg,da9063l
 
@@ -35,20 +42,28 @@ properties:
   "#interrupt-cells":
     const: 2
 
-  dlg,use-sw-pm:
-    type: boolean
-    description:
-      Disable the watchdog during suspend.
-      Only use this option if you can't use the watchdog automatic suspend
-      function during a suspend (see register CONTROL_B).
+  gpio-controller: true
 
-  watchdog:
+  "#gpio-cells":
+    const: 2
+
+  gpio:
     type: object
-    $ref: /schemas/watchdog/watchdog.yaml#
-    unevaluatedProperties: false
+    additionalProperties: false
     properties:
       compatible:
-        const: dlg,da9063-watchdog
+        const: dlg,da9062-gpio
+
+  onkey:
+    $ref: /schemas/input/dlg,da9062-onkey.yaml
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
 
   rtc:
     type: object
@@ -56,37 +71,86 @@ properties:
     unevaluatedProperties: false
     properties:
       compatible:
-        const: dlg,da9063-rtc
+        enum:
+          - dlg,da9062-rtc
+          - dlg,da9063-rtc
 
-  onkey:
-    type: object
-    $ref: /schemas/input/input.yaml#
-    unevaluatedProperties: false
-    properties:
-      compatible:
-        const: dlg,da9063-onkey
+  thermal:
+    $ref: /schemas/thermal/dlg,da9062-thermal.yaml
 
-      dlg,disable-key-power:
-        type: boolean
-        description: |
-          Disable power-down using a long key-press.
-          If this entry does not exist then by default the key-press triggered
-          power down is enabled and the OnKey will support both KEY_POWER and
-          KEY_SLEEP.
+  watchdog:
+    $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
 
-  regulators:
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
     type: object
-    additionalProperties: false
-    patternProperties:
-      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
-        $ref: /schemas/regulator/regulator.yaml
-        unevaluatedProperties: false
+
+    required:
+      - gpio-hog
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9063
+              - dlg,da9063l
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^buck[1-4]$": false
+        thermal: false
+      required:
+        - interrupts
+        - interrupt-controller
+        - '#interrupt-cells'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9062
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+      required:
+        - gpio
+        - onkey
+        - rtc
+        - thermal
+        - watchdog
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9061
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+        rtc: false
+      required:
+        - onkey
+        - thermal
+        - watchdog
 
 additionalProperties: false
 
@@ -99,10 +163,10 @@ examples:
       pmic@58 {
         compatible = "dlg,da9063";
         reg = <0x58>;
-        #interrupt-cells = <2>;
         interrupt-parent = <&gpio6>;
         interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         interrupt-controller;
+        #interrupt-cells = <2>;
 
         rtc {
           compatible = "dlg,da9063-rtc";
@@ -143,4 +207,121 @@ examples:
         };
       };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9062";
+        reg = <0x58>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        sd0-pwr-sel-hog {
+          gpio-hog;
+          gpios = <1 0>;
+          input;
+          line-name = "SD0_PWR_SEL";
+        };
+
+        sd1-pwr-sel-hog {
+          gpio-hog;
+          gpios = <2 0>;
+          input;
+          line-name = "SD1_PWR_SEL";
+        };
+
+        sw-et0-en-hog {
+          gpio-hog;
+          gpios = <3 0>;
+          input;
+          line-name = "SW_ET0_EN#";
+        };
+
+        pmic-good-hog {
+          gpio-hog;
+          gpios = <4 0>;
+          output-high;
+          line-name = "PMIC_PGOOD";
+        };
+
+        gpio {
+          compatible = "dlg,da9062-gpio";
+        };
+
+        onkey {
+          compatible = "dlg,da9062-onkey";
+        };
+
+        regulators {
+          buck1 {
+            regulator-name = "vdd_arm";
+            regulator-min-microvolt = <925000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck2 {
+            regulator-name = "vdd_soc";
+            regulator-min-microvolt = <1150000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "vdd_ddr3";
+            regulator-min-microvolt = <1500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "vdd_eth";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          ldo1 {
+            regulator-name = "vdd_snvs";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo2 {
+            regulator-name = "vdd_high";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo3 {
+            regulator-name = "vdd_eth_io";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+          ldo4 {
+            regulator-name = "vdd_emmc";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+
+        rtc {
+          compatible = "dlg,da9062-rtc";
+        };
+
+        thermal {
+          compatible = "dlg,da9062-thermal";
+        };
+
+        watchdog {
+          compatible = "dlg,da9062-watchdog";
+          dlg,use-sw-pm;
+        };
+      };
+    };
 ...
diff --git a/Bindings/mfd/google,cros-ec.yaml b/Bindings/mfd/google,cros-ec.yaml
index e1ca4f297c..aac8819bd0 100644
--- a/Bindings/mfd/google,cros-ec.yaml
+++ b/Bindings/mfd/google,cros-ec.yaml
@@ -93,6 +93,11 @@ properties:
   '#size-cells':
     const: 0
 
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
   typec:
     $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
@@ -275,6 +280,8 @@ examples:
             interrupts = <99 0>;
             interrupt-parent = <&gpio7>;
             spi-max-frequency = <5000000>;
+            #gpio-cells = <2>;
+            gpio-controller;
 
             proximity {
                 compatible = "google,cros-ec-mkbp-proximity";
diff --git a/Bindings/mfd/iqs62x.yaml b/Bindings/mfd/iqs62x.yaml
index 044cd7542c..f438c23749 100644
--- a/Bindings/mfd/iqs62x.yaml
+++ b/Bindings/mfd/iqs62x.yaml
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Specifies the name of the calibration and configuration file selected by
       the driver. If this property is omitted, the name is chosen based on the
diff --git a/Bindings/mfd/qcom,tcsr.yaml b/Bindings/mfd/qcom,tcsr.yaml
index 798705ab6a..b97d770153 100644
--- a/Bindings/mfd/qcom,tcsr.yaml
+++ b/Bindings/mfd/qcom,tcsr.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,msm8976-tcsr
           - qcom,msm8998-tcsr
+          - qcom,qcm2290-tcsr
           - qcom,qcs404-tcsr
           - qcom,sc7180-tcsr
           - qcom,sc7280-tcsr
@@ -28,6 +29,7 @@ properties:
           - qcom,sdx55-tcsr
           - qcom,sdx65-tcsr
           - qcom,sm4450-tcsr
+          - qcom,sm6115-tcsr
           - qcom,sm8150-tcsr
           - qcom,sm8250-tcsr
           - qcom,sm8350-tcsr
diff --git a/Bindings/mfd/syscon.yaml b/Bindings/mfd/syscon.yaml
index 084b5c2a2a..9d55bee155 100644
--- a/Bindings/mfd/syscon.yaml
+++ b/Bindings/mfd/syscon.yaml
@@ -72,7 +72,10 @@ properties:
               - rockchip,rk3588-qos
               - rockchip,rv1126-qos
               - starfive,jh7100-sysmain
+              - ti,am62-usb-phy-ctrl
               - ti,am654-dss-oldi-io-ctrl
+              - ti,am654-serdes-ctrl
+              - ti,j784s4-pcie-ctrl
 
           - const: syscon
 
diff --git a/Bindings/mfd/ti,twl.yaml b/Bindings/mfd/ti,twl.yaml
index c04d57ba22..52ed228fb1 100644
--- a/Bindings/mfd/ti,twl.yaml
+++ b/Bindings/mfd/ti,twl.yaml
@@ -34,6 +34,8 @@ properties:
 
   interrupt-controller: true
 
+  system-power-controller: true
+
   "#interrupt-cells":
     const: 1
 
diff --git a/Bindings/mips/cpus.yaml b/Bindings/mips/cpus.yaml
index cf382dea39..a85137add6 100644
--- a/Bindings/mips/cpus.yaml
+++ b/Bindings/mips/cpus.yaml
@@ -23,22 +23,23 @@ properties:
       - brcm,bmips4380
       - brcm,bmips5000
       - brcm,bmips5200
-      - ingenic,xburst-mxu1.0
+      - img,i6500
       - ingenic,xburst-fpu1.0-mxu1.1
       - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst-mxu1.0
       - ingenic,xburst2-fpu2.1-mxu2.1-smt
       - loongson,gs264
       - mips,m14Kc
-      - mips,mips4Kc
-      - mips,mips4KEc
-      - mips,mips24Kc
+      - mips,mips1004Kc
       - mips,mips24KEc
+      - mips,mips24Kc
+      - mips,mips4KEc
+      - mips,mips4Kc
       - mips,mips74Kc
-      - mips,mips1004Kc
       - mti,interaptiv
-      - mti,mips24KEc
       - mti,mips14KEc
       - mti,mips14Kc
+      - mti,mips24KEc
 
   reg:
     maxItems: 1
diff --git a/Bindings/mips/mobileye.yaml b/Bindings/mips/mobileye.yaml
new file mode 100644
index 0000000000..831975f6b4
--- /dev/null
+++ b/Bindings/mips/mobileye.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2023 Mobileye Vision Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/mobileye.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye SoC series
+
+maintainers:
+  - Vladimir Kondratiev <vladimir.kondratiev@intel.com>
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+
+description:
+  Boards with a Mobileye SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Boards with Mobileye EyeQ5 SoC
+        items:
+          - enum:
+              - mobileye,eyeq5-epm5
+          - const: mobileye,eyeq5
+
+additionalProperties: true
+
+...
diff --git a/Bindings/misc/qcom,fastrpc.yaml b/Bindings/misc/qcom,fastrpc.yaml
index 2dc3e245fa..c27a8f33d8 100644
--- a/Bindings/misc/qcom,fastrpc.yaml
+++ b/Bindings/misc/qcom,fastrpc.yaml
@@ -77,6 +77,8 @@ patternProperties:
       reg:
         maxItems: 1
 
+      dma-coherent: true
+
       iommus:
         minItems: 1
         maxItems: 3
diff --git a/Bindings/misc/xlnx,sd-fec.txt b/Bindings/misc/xlnx,sd-fec.txt
deleted file mode 100644
index e3289634fa..0000000000
--- a/Bindings/misc/xlnx,sd-fec.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Xilinx SDFEC(16nm) IP *
-
-The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
-which provides high-throughput LDPC and Turbo Code implementations.
-The LDPC decode & encode functionality is capable of covering a range of
-customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
-principally covers codes used by LTE. The FEC Engine offers significant
-power and area savings versus implementations done in the FPGA fabric.
-
-
-Required properties:
-- compatible: Must be "xlnx,sd-fec-1.1"
-- clock-names : List of input clock names from the following:
-    - "core_clk", Main processing clock for processing core (required)
-    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
-    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
-    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
-    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
-    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
-    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
-    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
-- clocks : Clock phandles (see clock_bindings.txt for details).
-- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
-  location and length.
-- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
-  being used.
-- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DIN_WORDS to be block based, while a value of 2 configures the
-  DIN_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DOUT_WORDS to be block based, while a value of 2 configures the
-  DOUT_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-Optional properties:
-- interrupts: should contain SDFEC interrupt number
-
-Example
----------------------------------------
-	sd_fec_0: sd-fec@a0040000 {
-		compatible = "xlnx,sd-fec-1.1";
-		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
-		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
-		reg = <0x0 0xa0040000 0x0 0x40000>;
-		interrupt-parent = <&axi_intc>;
-		interrupts = <1 0>;
-		xlnx,sdfec-code = "ldpc";
-		xlnx,sdfec-din-words = <0>;
-		xlnx,sdfec-din-width = <2>;
-		xlnx,sdfec-dout-words = <0>;
-		xlnx,sdfec-dout-width = <1>;
-	};
diff --git a/Bindings/misc/xlnx,sd-fec.yaml b/Bindings/misc/xlnx,sd-fec.yaml
new file mode 100644
index 0000000000..9bd2103374
--- /dev/null
+++ b/Bindings/misc/xlnx,sd-fec.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SDFEC(16nm) IP
+
+maintainers:
+  - Cvetic, Dragan <dragan.cvetic@amd.com>
+  - Erim, Salih <salih.erim@amd.com>
+
+description:
+  The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+  which provides high-throughput LDPC and Turbo Code implementations.
+  The LDPC decode & encode functionality is capable of covering a range of
+  customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+  principally covers codes used by LTE. The FEC Engine offers significant
+  power and area savings versus implementations done in the FPGA fabric.
+
+properties:
+  compatible:
+    const: xlnx,sd-fec-1.1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 8
+    additionalItems: true
+    items:
+      - description: Main processing clock for processing core
+      - description: AXI4-Lite memory-mapped slave interface clock
+      - description: Control input AXI4-Stream Slave interface clock
+      - description: DIN AXI4-Stream Slave interface clock
+      - description: Status output AXI4-Stream Master interface clock
+      - description: DOUT AXI4-Stream Master interface clock
+      - description: DIN_WORDS AXI4-Stream Slave interface clock
+      - description: DOUT_WORDS AXI4-Stream Master interface clock
+
+  clock-names:
+    allOf:
+      - minItems: 2
+        maxItems: 8
+        additionalItems: true
+        items:
+          - const: core_clk
+          - const: s_axi_aclk
+      - items:
+          enum:
+            - core_clk
+            - s_axi_aclk
+            - s_axis_ctrl_aclk
+            - s_axis_din_aclk
+            - m_axis_status_aclk
+            - m_axis_dout_aclk
+            - s_axis_din_words_aclk
+            - m_axis_dout_words_aclk
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,sdfec-code:
+    description:
+      The SD-FEC integrated block supports Low Density Parity Check (LDPC)
+      decoding and encoding and Turbo code decoding. The LDPC codes used are
+      highly configurable, and the specific code used can be specified on
+      a codeword-by-codeword basis. The Turbo code decoding is required by LTE
+      standard.
+    $ref: /schemas/types.yaml#/definitions/string
+    items:
+      enum: [ ldpc, turbo ]
+
+  xlnx,sdfec-din-width:
+    description:
+      Configures the DIN AXI stream where a value of 1
+      configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+      of "4x128b".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  xlnx,sdfec-din-words:
+    description:
+      A value 0 indicates that the DIN_WORDS interface is
+      driven with a fixed value and is not present on the device, a value of 1
+      configures the DIN_WORDS to be block based, while a value of 2 configures the
+      DIN_WORDS input to be supplied for each AXI transaction.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  xlnx,sdfec-dout-width:
+    description:
+      Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b",
+      2 a width of "2x128b" and 4 configures a width of "4x128b".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  xlnx,sdfec-dout-words:
+    description:
+      A value 0 indicates that the DOUT_WORDS interface is
+      driven with a fixed value and is not present on the device, a value of 1
+      configures the DOUT_WORDS to be block based, while a value of 2 configures the
+      DOUT_WORDS input to be supplied for each AXI transaction.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - xlnx,sdfec-code
+  - xlnx,sdfec-din-width
+  - xlnx,sdfec-din-words
+  - xlnx,sdfec-dout-width
+  - xlnx,sdfec-dout-words
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    sd-fec@a0040000 {
+        compatible = "xlnx,sd-fec-1.1";
+        reg = <0xa0040000 0x40000>;
+        clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>,
+                 <&misc_clk_1>, <&misc_clk_1>;
+        clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk",
+                      "s_axis_din_aclk", "m_axis_status_aclk",
+                      "m_axis_dout_aclk";
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,sdfec-code = "ldpc";
+        xlnx,sdfec-din-width = <2>;
+        xlnx,sdfec-din-words = <0>;
+        xlnx,sdfec-dout-width = <1>;
+        xlnx,sdfec-dout-words = <0>;
+    };
+
diff --git a/Bindings/mmc/fsl-imx-esdhc.yaml b/Bindings/mmc/fsl-imx-esdhc.yaml
index 82eb7a24c8..82f7ee8702 100644
--- a/Bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Bindings/mmc/fsl-imx-esdhc.yaml
@@ -55,8 +55,9 @@ properties:
           - enum:
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
-              - fsl,imx93-usdhc
               - fsl,imx8ulp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx95-usdhc
           - const: fsl,imx8mm-usdhc
       - items:
           - enum:
@@ -162,6 +163,9 @@ properties:
       - const: ahb
       - const: per
 
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
@@ -173,6 +177,11 @@ properties:
           - const: state_100mhz
           - const: state_200mhz
           - const: sleep
+      - minItems: 2
+        items:
+          - const: default
+          - const: state_100mhz
+          - const: sleep
       - minItems: 1
         items:
           - const: default
diff --git a/Bindings/mmc/fsl-imx-mmc.yaml b/Bindings/mmc/fsl-imx-mmc.yaml
index 221f5bc047..7911316fbd 100644
--- a/Bindings/mmc/fsl-imx-mmc.yaml
+++ b/Bindings/mmc/fsl-imx-mmc.yaml
@@ -24,6 +24,14 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
   interrupts:
     maxItems: 1
 
@@ -34,6 +42,8 @@ properties:
     const: rx-tx
 
 required:
+  - clocks
+  - clock-names
   - compatible
   - reg
   - interrupts
@@ -46,6 +56,8 @@ examples:
         compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
         reg = <0x10014000 0x1000>;
         interrupts = <11>;
+        clocks = <&clks 29>, <&clks 60>;
+        clock-names = "ipg", "per";
         dmas = <&dma 7>;
         dma-names = "rx-tx";
         bus-width = <4>;
diff --git a/Bindings/mmc/hi3798cv200-dw-mshc.txt b/Bindings/mmc/hi3798cv200-dw-mshc.txt
deleted file mode 100644
index a0693b7145..0000000000
--- a/Bindings/mmc/hi3798cv200-dw-mshc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-Read synopsys-dw-mshc.txt for more details
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200
-specific extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc".
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-  in clock-names.
-- clock-names: Should contain the following:
-	"ciu" - The ciu clock described in synopsys-dw-mshc.txt.
-	"biu" - The biu clock described in synopsys-dw-mshc.txt.
-	"ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling.
-	"ciu-drive"  - Hi3798CV200 extended phase clock for ciu driving.
-
-Example:
-
-	emmc: mmc@9830000 {
-		compatible = "hisilicon,hi3798cv200-dw-mshc";
-		reg = <0x9830000 0x10000>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&crg HISTB_MMC_CIU_CLK>,
-			 <&crg HISTB_MMC_BIU_CLK>,
-			 <&crg HISTB_MMC_SAMPLE_CLK>,
-			 <&crg HISTB_MMC_DRV_CLK>;
-		clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
-		fifo-depth = <256>;
-		clock-frequency = <200000000>;
-		cap-mmc-highspeed;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		non-removable;
-		bus-width = <8>;
-	};
diff --git a/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml b/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml
new file mode 100644
index 0000000000..41c9b22523
--- /dev/null
+++ b/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/hisilicon,hi3798cv200-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiSTB SoCs specific extensions to the Synopsys DWMMC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hi3798cv200-dw-mshc
+      - hisilicon,hi3798mv200-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bus interface unit clock
+      - description: card interface unit clock
+      - description: card input sample phase clock
+      - description: controller output drive phase clock
+
+  clock-names:
+    items:
+      - const: ciu
+      - const: biu
+      - const: ciu-sample
+      - const: ciu-drive
+
+  hisilicon,sap-dll-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      DWMMC core on Hi3798MV2x SoCs has a delay-locked-loop(DLL) attached to card data input path.
+      It is integrated into CRG core on the SoC and has to be controlled during tuning.
+    items:
+      - description: A phandle pointed to the CRG syscon node
+      - description: Sample DLL register offset in CRG address space
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: hisilicon,hi3798mv200-dw-mshc
+    then:
+      required:
+        - hisilicon,sap-dll-reg
+    else:
+      properties:
+        hisilicon,sap-dll-reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/histb-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@9830000 {
+        compatible = "hisilicon,hi3798cv200-dw-mshc";
+        reg = <0x9830000 0x10000>;
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg HISTB_MMC_CIU_CLK>,
+                 <&crg HISTB_MMC_BIU_CLK>,
+                 <&crg HISTB_MMC_SAMPLE_CLK>,
+                 <&crg HISTB_MMC_DRV_CLK>;
+        clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+        resets = <&crg 0xa0 4>;
+        reset-names = "reset";
+        pinctrl-names = "default";
+        pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+                     &emmc_pins_3 &emmc_pins_4>;
+        fifo-depth = <256>;
+        clock-frequency = <200000000>;
+        cap-mmc-highspeed;
+        mmc-ddr-1_8v;
+        mmc-hs200-1_8v;
+        non-removable;
+        bus-width = <8>;
+    };
diff --git a/Bindings/mmc/renesas,sdhi.yaml b/Bindings/mmc/renesas,sdhi.yaml
index f7a4c6bc70..29f2400247 100644
--- a/Bindings/mmc/renesas,sdhi.yaml
+++ b/Bindings/mmc/renesas,sdhi.yaml
@@ -67,6 +67,7 @@ properties:
               - renesas,sdhi-r8a779a0  # R-Car V3U
               - renesas,sdhi-r8a779f0  # R-Car S4-8
               - renesas,sdhi-r8a779g0  # R-Car V4H
+              - renesas,sdhi-r8a779h0  # R-Car V4M
           - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
diff --git a/Bindings/mmc/snps,dwcmshc-sdhci.yaml b/Bindings/mmc/snps,dwcmshc-sdhci.yaml
index 42804d9552..4d3031d996 100644
--- a/Bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -19,6 +19,8 @@ properties:
       - rockchip,rk3568-dwcmshc
       - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
+      - sophgo,cv1800b-dwcmshc
+      - sophgo,sg2002-dwcmshc
       - thead,th1520-dwcmshc
 
   reg:
diff --git a/Bindings/mtd/atmel-nand.txt b/Bindings/mtd/atmel-nand.txt
index 50645828ac..4598930851 100644
--- a/Bindings/mtd/atmel-nand.txt
+++ b/Bindings/mtd/atmel-nand.txt
@@ -56,6 +56,7 @@ Required properties:
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
 	"microchip,sam9x60-pmecc"
+	"microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 
diff --git a/Bindings/mtd/brcm,brcmnand.yaml b/Bindings/mtd/brcm,brcmnand.yaml
index f57e96374e..064e840aea 100644
--- a/Bindings/mtd/brcm,brcmnand.yaml
+++ b/Bindings/mtd/brcm,brcmnand.yaml
@@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller
 maintainers:
   - Brian Norris <computersforpeace@gmail.com>
   - Kamal Dasu <kdasu.kdev@gmail.com>
+  - William Zhang <william.zhang@broadcom.com>
 
 description: |
   The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
@@ -18,9 +19,10 @@ description: |
   supports basic PROGRAM and READ functions, among other features.
 
   This controller was originally designed for STB SoCs (BCM7xxx) but is now
-  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
-  iProc/Cygnus. Its history includes several similar (but not fully register
-  compatible) versions.
+  available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based
+  Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus.
+  Its history includes several similar (but not fully register compatible)
+  versions.
 
   -- Additional SoC-specific NAND controller properties --
 
@@ -53,7 +55,7 @@ properties:
               - brcm,brcmnand-v7.2
               - brcm,brcmnand-v7.3
           - const: brcm,brcmnand
-      - description: BCM63138 SoC-specific NAND controller
+      - description: BCMBCA SoC-specific NAND controller
         items:
           - const: brcm,nand-bcm63138
           - enum:
@@ -111,6 +113,13 @@ properties:
       earlier versions of this core that include WP
     type: boolean
 
+  brcm,wp-not-connected:
+    description:
+      Use this property when WP pin is not physically wired to the NAND chip.
+      Write protection feature cannot be used. By default, controller assumes
+      the pin is connected and feature is used.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -137,6 +146,15 @@ patternProperties:
           layout.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      brcm,nand-ecc-use-strap:
+        description:
+          This property requires the host system to get the ECC related
+          settings from the SoC NAND boot strap configuration instead of
+          the generic NAND ECC settings. This is a common hardware design
+          on BCMBCA based boards. This strap ECC option and generic NAND
+          ECC option can not be specified at the same time.
+        $ref: /schemas/types.yaml#/definitions/flag
+
     unevaluatedProperties: false
 
 allOf:
@@ -177,6 +195,8 @@ allOf:
             - const: iproc-idm
             - const: iproc-ext
   - if:
+      required:
+        - interrupts
       properties:
         interrupts:
           minItems: 2
@@ -184,12 +204,26 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          required:
+            - brcm,nand-ecc-use-strap
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength: false
+            nand-ecc-step-size: false
+            nand-ecc-maximize: false
+            nand-ecc-algo: false
+            brcm,nand-oob-sector-size: false
+
 unevaluatedProperties: false
 
 required:
   - reg
   - reg-names
-  - interrupts
 
 examples:
   - |
diff --git a/Bindings/mtd/davinci-nand.txt b/Bindings/mtd/davinci-nand.txt
index edebeae1f5..eb8e2ff4db 100644
--- a/Bindings/mtd/davinci-nand.txt
+++ b/Bindings/mtd/davinci-nand.txt
@@ -68,7 +68,7 @@ Deprecated properties:
 				false.
 
 Nand device bindings may contain additional sub-nodes describing partitions of
-the address space. See partition.txt for more detail. The NAND Flash timing
+the address space. See mtd.yaml for more detail. The NAND Flash timing
 values must be programmed in the chip select’s node of AEMIF
 memory-controller (see Documentation/devicetree/bindings/memory-controllers/
 davinci-aemif.txt).
diff --git a/Bindings/mtd/flctl-nand.txt b/Bindings/mtd/flctl-nand.txt
index 427f46dc60..51518399d7 100644
--- a/Bindings/mtd/flctl-nand.txt
+++ b/Bindings/mtd/flctl-nand.txt
@@ -15,7 +15,7 @@ The DMA fields are not used yet in the driver but are listed here for
 completing the bindings.
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/fsl-upm-nand.txt b/Bindings/mtd/fsl-upm-nand.txt
index 25f07c1f9e..530c017e01 100644
--- a/Bindings/mtd/fsl-upm-nand.txt
+++ b/Bindings/mtd/fsl-upm-nand.txt
@@ -22,7 +22,7 @@ Deprecated properties:
 	(R/B# pins not connected).
 
 Each flash chip described may optionally contain additional sub-nodes
-describing partitions of the address space. See partition.txt for more
+describing partitions of the address space. See mtd.yaml for more
 detail.
 
 Examples:
diff --git a/Bindings/mtd/gpio-control-nand.txt b/Bindings/mtd/gpio-control-nand.txt
index 486a17d533..0edf55d47e 100644
--- a/Bindings/mtd/gpio-control-nand.txt
+++ b/Bindings/mtd/gpio-control-nand.txt
@@ -26,7 +26,7 @@ Optional properties:
   read to ensure that the GPIO accesses have completed.
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Examples:
 
diff --git a/Bindings/mtd/gpmi-nand.yaml b/Bindings/mtd/gpmi-nand.yaml
index ba086c3462..021c0da0b0 100644
--- a/Bindings/mtd/gpmi-nand.yaml
+++ b/Bindings/mtd/gpmi-nand.yaml
@@ -12,7 +12,7 @@ maintainers:
 description: |
   The GPMI nand controller provides an interface to control the NAND
   flash chips. The device tree may optionally contain sub-nodes
-  describing partitions of the address space. See partition.txt for
+  describing partitions of the address space. See mtd.yaml for
   more detail.
 
 properties:
diff --git a/Bindings/mtd/hisi504-nand.txt b/Bindings/mtd/hisi504-nand.txt
index 8963983ae7..362203e7d5 100644
--- a/Bindings/mtd/hisi504-nand.txt
+++ b/Bindings/mtd/hisi504-nand.txt
@@ -22,7 +22,7 @@ The following ECC strength and step size are currently supported:
  - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
 
 Flash chip may optionally contain additional sub-nodes describing partitions of
-the address space. See partition.txt for more detail.
+the address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/jedec,spi-nor.yaml b/Bindings/mtd/jedec,spi-nor.yaml
index 58f0cea160..6e3afb4292 100644
--- a/Bindings/mtd/jedec,spi-nor.yaml
+++ b/Bindings/mtd/jedec,spi-nor.yaml
@@ -52,6 +52,9 @@ properties:
     minItems: 1
     maxItems: 2
 
+  interrupts:
+    maxItems: 1
+
   m25p,fast-read:
     type: boolean
     description:
diff --git a/Bindings/mtd/mtd.yaml b/Bindings/mtd/mtd.yaml
index f322290ee5..ee442ecb11 100644
--- a/Bindings/mtd/mtd.yaml
+++ b/Bindings/mtd/mtd.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
   - Richard Weinberger <richard@nod.at>
 
+select: false
+
 properties:
   $nodename:
     pattern: "^(flash|.*sram|nand)(@.*)?$"
diff --git a/Bindings/mtd/nvidia-tegra20-nand.txt b/Bindings/mtd/nvidia-tegra20-nand.txt
index e737e5beb7..4a00ec2b25 100644
--- a/Bindings/mtd/nvidia-tegra20-nand.txt
+++ b/Bindings/mtd/nvidia-tegra20-nand.txt
@@ -39,7 +39,7 @@ Optional children node properties:
 - wp-gpios: GPIO specifier for the write protect pin.
 
 Optional child node of NAND chip nodes:
-Partitions: see partition.txt
+Partitions: see mtd.yaml
 
   Example:
 	nand-controller@70008000 {
diff --git a/Bindings/mtd/orion-nand.txt b/Bindings/mtd/orion-nand.txt
index 2d6ab660e6..b9997b1f13 100644
--- a/Bindings/mtd/orion-nand.txt
+++ b/Bindings/mtd/orion-nand.txt
@@ -13,7 +13,7 @@ Optional properties:
                registers in usecs
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/partitions/linux,ubi.yaml b/Bindings/mtd/partitions/linux,ubi.yaml
new file mode 100644
index 0000000000..27e1ac1f25
--- /dev/null
+++ b/Bindings/mtd/partitions/linux,ubi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unsorted Block Images
+
+description: |
+  UBI ("Unsorted Block Images") is a volume management system for raw
+  flash devices which manages multiple logical volumes on a single
+  physical flash device and spreads the I/O load (i.e wear-leveling)
+  across the whole flash chip.
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    const: linux,ubi
+
+  volumes:
+    type: object
+    description: UBI Volumes
+
+    patternProperties:
+      "^ubi-volume-.*$":
+        $ref: /schemas/mtd/partitions/ubi-volume.yaml#
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x100000>;
+            label = "bootloader";
+            read-only;
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "ubi";
+            compatible = "linux,ubi";
+
+            volumes {
+                ubi-volume-caldata {
+                    volid = <2>;
+                    volname = "rf";
+
+                    nvmem-layout {
+                        compatible = "fixed-layout";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+
+                        eeprom@0 {
+                            reg = <0x0 0x1000>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Bindings/mtd/partitions/ubi-volume.yaml b/Bindings/mtd/partitions/ubi-volume.yaml
new file mode 100644
index 0000000000..19736b2605
--- /dev/null
+++ b/Bindings/mtd/partitions/ubi-volume.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UBI volume
+
+description: |
+  This binding describes a single UBI volume. Volumes can be matches either
+  by their ID or their name, or both.
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+properties:
+  volid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Match UBI volume ID
+
+  volname:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Match UBI volume ID
+
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
+    description:
+      This container may reference an NVMEM layout parser.
+
+anyOf:
+  - required:
+      - volid
+
+  - required:
+      - volname
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git a/Bindings/mtd/samsung-s3c2410.txt b/Bindings/mtd/samsung-s3c2410.txt
index 09815c40fc..6354553506 100644
--- a/Bindings/mtd/samsung-s3c2410.txt
+++ b/Bindings/mtd/samsung-s3c2410.txt
@@ -19,7 +19,7 @@ Optional child properties:
 
 Each child device node may optionally contain a 'partitions' sub-node,
 which further contains sub-nodes describing the flash partition mapping.
-See partition.txt for more detail.
+See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/st,stm32-fmc2-nand.yaml b/Bindings/mtd/st,stm32-fmc2-nand.yaml
index e72cb5baca..b8ef9ba88e 100644
--- a/Bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -14,10 +14,11 @@ properties:
     enum:
       - st,stm32mp15-fmc2
       - st,stm32mp1-fmc2-nfc
+      - st,stm32mp25-fmc2-nfc
 
   reg:
     minItems: 6
-    maxItems: 7
+    maxItems: 12
 
   interrupts:
     maxItems: 1
@@ -92,6 +93,28 @@ allOf:
             - description: Chip select 1 command
             - description: Chip select 1 address space
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp25-fmc2-nfc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+            - description: Chip select 2 data
+            - description: Chip select 2 command
+            - description: Chip select 2 address space
+            - description: Chip select 3 data
+            - description: Chip select 3 command
+            - description: Chip select 3 address space
+
 required:
   - compatible
   - reg
diff --git a/Bindings/mux/mux-controller.yaml b/Bindings/mux/mux-controller.yaml
index 8b943082a2..571ad9e13e 100644
--- a/Bindings/mux/mux-controller.yaml
+++ b/Bindings/mux/mux-controller.yaml
@@ -74,7 +74,7 @@ select:
 
 properties:
   $nodename:
-    pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+    pattern: '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$'
 
   '#mux-control-cells':
     enum: [ 0, 1 ]
diff --git a/Bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
index eba2f3026a..055a335188 100644
--- a/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Bluetooth Chips
 
 maintainers:
-  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
-  - Rocky Liao <rjliao@codeaurora.org>
+  - Balakrishna Godavarthi <quic_bgodavar@quicinc.com>
+  - Rocky Liao <quic_rjliao@quicinc.com>
 
 description:
   This binding describes Qualcomm UART-attached bluetooth chips.
@@ -94,6 +94,10 @@ properties:
 
   local-bd-address: true
 
+  qcom,local-bd-address-broken:
+    type: boolean
+    description:
+      boot firmware is incorrectly passing the address in big-endian order
 
 required:
   - compatible
diff --git a/Bindings/net/brcm,asp-v2.0.yaml b/Bindings/net/brcm,asp-v2.0.yaml
index 75d8138298..660e2ca42d 100644
--- a/Bindings/net/brcm,asp-v2.0.yaml
+++ b/Bindings/net/brcm,asp-v2.0.yaml
@@ -15,6 +15,10 @@ description: Broadcom Ethernet controller first introduced with 72165
 properties:
   compatible:
     oneOf:
+      - items:
+          - enum:
+              - brcm,bcm74165b0-asp
+          - const: brcm,asp-v2.2
       - items:
           - enum:
               - brcm,bcm74165-asp
diff --git a/Bindings/net/brcm,unimac-mdio.yaml b/Bindings/net/brcm,unimac-mdio.yaml
index 6684810fcb..23dfe0838d 100644
--- a/Bindings/net/brcm,unimac-mdio.yaml
+++ b/Bindings/net/brcm,unimac-mdio.yaml
@@ -24,6 +24,7 @@ properties:
       - brcm,genet-mdio-v5
       - brcm,asp-v2.0-mdio
       - brcm,asp-v2.1-mdio
+      - brcm,asp-v2.2-mdio
       - brcm,unimac-mdio
 
   reg:
diff --git a/Bindings/net/can/fsl,flexcan.yaml b/Bindings/net/can/fsl,flexcan.yaml
index 4162469c3c..f197d9b516 100644
--- a/Bindings/net/can/fsl,flexcan.yaml
+++ b/Bindings/net/can/fsl,flexcan.yaml
@@ -38,6 +38,9 @@ properties:
               - fsl,imx6ul-flexcan
               - fsl,imx6sx-flexcan
           - const: fsl,imx6q-flexcan
+      - items:
+          - const: fsl,imx95-flexcan
+          - const: fsl,imx93-flexcan
       - items:
           - enum:
               - fsl,ls1028ar1-flexcan
diff --git a/Bindings/net/can/microchip,mpfs-can.yaml b/Bindings/net/can/microchip,mpfs-can.yaml
index 45aa3de7cf..01e4d4a54d 100644
--- a/Bindings/net/can/microchip,mpfs-can.yaml
+++ b/Bindings/net/can/microchip,mpfs-can.yaml
@@ -24,7 +24,9 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    items:
+      - description: AHB peripheral clock
+      - description: CAN bus clock
 
 required:
   - compatible
@@ -39,7 +41,7 @@ examples:
     can@2010c000 {
         compatible = "microchip,mpfs-can";
         reg = <0x2010c000 0x1000>;
-        clocks = <&clkcfg 17>;
+        clocks = <&clkcfg 17>, <&clkcfg 37>;
         interrupt-parent = <&plic>;
         interrupts = <56>;
     };
diff --git a/Bindings/net/can/tcan4x5x.txt b/Bindings/net/can/tcan4x5x.txt
index 170e23f061..20c0572c98 100644
--- a/Bindings/net/can/tcan4x5x.txt
+++ b/Bindings/net/can/tcan4x5x.txt
@@ -28,6 +28,8 @@ Optional properties:
 			      available with tcan4552/4553.
 	- device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
 			     available with tcan4552/4553.
+	- wakeup-source: Leave the chip running when suspended, and configure
+			 the RX interrupt to wake up the device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
@@ -42,4 +44,5 @@ tcan4x5x: tcan4x5x@0 {
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 };
diff --git a/Bindings/net/can/xilinx,can.yaml b/Bindings/net/can/xilinx,can.yaml
index 64d57c343e..8d4e5af6fd 100644
--- a/Bindings/net/can/xilinx,can.yaml
+++ b/Bindings/net/can/xilinx,can.yaml
@@ -49,6 +49,10 @@ properties:
   resets:
     maxItems: 1
 
+  xlnx,has-ecc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN)
+
 required:
   - compatible
   - reg
@@ -137,6 +141,7 @@ examples:
         interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
         tx-fifo-depth = <0x40>;
         rx-fifo-depth = <0x40>;
+        xlnx,has-ecc;
     };
 
   - |
diff --git a/Bindings/net/cdns,macb.yaml b/Bindings/net/cdns,macb.yaml
index bf8894a025..2c71e2cf3a 100644
--- a/Bindings/net/cdns,macb.yaml
+++ b/Bindings/net/cdns,macb.yaml
@@ -59,6 +59,11 @@ properties:
           - cdns,gem                  # Generic
           - cdns,macb                 # Generic
 
+      - items:
+          - enum:
+              - microchip,sam9x7-gem     # Microchip SAM9X7 gigabit ethernet interface
+          - const: microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
+
   reg:
     minItems: 1
     items:
diff --git a/Bindings/net/dsa/ar9331.txt b/Bindings/net/dsa/ar9331.txt
deleted file mode 100644
index f824fdae0d..0000000000
--- a/Bindings/net/dsa/ar9331.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Atheros AR9331 built-in switch
-=============================
-
-It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
-MDIO bus. All PHYs are built-in as well.
-
-Required properties:
-
- - compatible: should be: "qca,ar9331-switch"
- - reg: Address on the MII bus for the switch.
- - resets : Must contain an entry for each entry in reset-names.
- - reset-names : Must include the following entries: "switch"
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the switch
- - interrupt-controller: Indicates the switch is itself an interrupt
-   controller. This is used for the PHY interrupts.
- - #interrupt-cells: must be 1
- - mdio: Container of PHY and devices on the switches MDIO bus.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-Examples:
-
-eth0: ethernet@19000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x19000000 0x200>;
-	interrupts = <4>;
-
-	resets = <&rst 9>, <&rst 22>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "mii";
-	phy-handle = <&phy_port4>;
-};
-
-eth1: ethernet@1a000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x1a000000 0x200>;
-	interrupts = <5>;
-	resets = <&rst 13>, <&rst 23>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "gmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch10: switch@10 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			compatible = "qca,ar9331-switch";
-			reg = <0x10>;
-			resets = <&rst 8>;
-			reset-names = "switch";
-
-			interrupt-parent = <&miscintc>;
-			interrupts = <12>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch_port0: port@0 {
-					reg = <0x0>;
-					ethernet = <&eth1>;
-
-					phy-mode = "gmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				switch_port1: port@1 {
-					reg = <0x1>;
-					phy-handle = <&phy_port0>;
-					phy-mode = "internal";
-				};
-
-				switch_port2: port@2 {
-					reg = <0x2>;
-					phy-handle = <&phy_port1>;
-					phy-mode = "internal";
-				};
-
-				switch_port3: port@3 {
-					reg = <0x3>;
-					phy-handle = <&phy_port2>;
-					phy-mode = "internal";
-				};
-
-				switch_port4: port@4 {
-					reg = <0x4>;
-					phy-handle = <&phy_port3>;
-					phy-mode = "internal";
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				interrupt-parent = <&switch10>;
-
-				phy_port0: phy@0 {
-					reg = <0x0>;
-					interrupts = <0>;
-				};
-
-				phy_port1: phy@1 {
-					reg = <0x1>;
-					interrupts = <0>;
-				};
-
-				phy_port2: phy@2 {
-					reg = <0x2>;
-					interrupts = <0>;
-				};
-
-				phy_port3: phy@3 {
-					reg = <0x3>;
-					interrupts = <0>;
-				};
-
-				phy_port4: phy@4 {
-					reg = <0x4>;
-					interrupts = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/Bindings/net/dsa/microchip,ksz.yaml b/Bindings/net/dsa/microchip,ksz.yaml
index c963dc09e8..52acc15ebc 100644
--- a/Bindings/net/dsa/microchip,ksz.yaml
+++ b/Bindings/net/dsa/microchip,ksz.yaml
@@ -31,6 +31,7 @@ properties:
       - microchip,ksz9893
       - microchip,ksz9563
       - microchip,ksz8563
+      - microchip,ksz8567
 
   reset-gpios:
     description:
diff --git a/Bindings/net/dsa/qca,ar9331.yaml b/Bindings/net/dsa/qca,ar9331.yaml
new file mode 100644
index 0000000000..fd9ddc59d3
--- /dev/null
+++ b/Bindings/net/dsa/qca,ar9331.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9331 built-in switch
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+  Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and
+  addressable over internal MDIO bus. All PHYs are built-in as well.
+
+properties:
+  compatible:
+    const: qca,ar9331-switch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    properties:
+      interrupt-parent: true
+
+    patternProperties:
+      '(ethernet-)?phy@[0-4]+$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          reg: true
+          interrupts:
+            maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: switch
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - mdio
+  - ports
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch10: switch@10 {
+            compatible = "qca,ar9331-switch";
+            reg = <0x10>;
+
+            interrupt-parent = <&miscintc>;
+            interrupts = <12>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            resets = <&rst 8>;
+            reset-names = "switch";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0x0>;
+                    ethernet = <&eth1>;
+
+                    phy-mode = "gmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <0x1>;
+                    phy-handle = <&phy_port0>;
+                    phy-mode = "internal";
+                };
+
+                port@2 {
+                    reg = <0x2>;
+                    phy-handle = <&phy_port1>;
+                    phy-mode = "internal";
+                };
+
+                port@3 {
+                    reg = <0x3>;
+                    phy-handle = <&phy_port2>;
+                    phy-mode = "internal";
+                };
+
+                port@4 {
+                    reg = <0x4>;
+                    phy-handle = <&phy_port3>;
+                    phy-mode = "internal";
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                interrupt-parent = <&switch10>;
+
+                phy_port0: ethernet-phy@0 {
+                    reg = <0x0>;
+                    interrupts = <0>;
+                };
+
+                phy_port1: ethernet-phy@1 {
+                    reg = <0x1>;
+                    interrupts = <0>;
+                };
+
+                phy_port2: ethernet-phy@2 {
+                    reg = <0x2>;
+                    interrupts = <0>;
+                };
+
+                phy_port3: ethernet-phy@3 {
+                    reg = <0x3>;
+                    interrupts = <0>;
+                };
+
+                phy_port4: ethernet-phy@4 {
+                    reg = <0x4>;
+                    interrupts = <0>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/net/dsa/realtek.yaml b/Bindings/net/dsa/realtek.yaml
index cce692f57b..70b6bda3cf 100644
--- a/Bindings/net/dsa/realtek.yaml
+++ b/Bindings/net/dsa/realtek.yaml
@@ -59,6 +59,9 @@ properties:
     description: GPIO to be used to reset the whole device
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   realtek,disable-leds:
     type: boolean
     description: |
@@ -127,7 +130,6 @@ else:
     - mdc-gpios
     - mdio-gpios
     - mdio
-    - reset-gpios
 
 required:
   - compatible
diff --git a/Bindings/net/ethernet-controller.yaml b/Bindings/net/ethernet-controller.yaml
index d14d123ad7..b2785b0313 100644
--- a/Bindings/net/ethernet-controller.yaml
+++ b/Bindings/net/ethernet-controller.yaml
@@ -14,7 +14,6 @@ properties:
     pattern: "^ethernet(@.*)?$"
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Human readable label on a port of a box.
 
   local-mac-address:
diff --git a/Bindings/net/ethernet-phy-package.yaml b/Bindings/net/ethernet-phy-package.yaml
new file mode 100644
index 0000000000..e567101e6f
--- /dev/null
+++ b/Bindings/net/ethernet-phy-package.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Package Common Properties
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  PHY packages are multi-port Ethernet PHY of the same family
+  and each Ethernet PHY is affected by the global configuration
+  of the PHY package.
+
+  Each reg of the PHYs defined in the PHY package node is
+  absolute and describe the real address of the Ethernet PHY on
+  the MDIO bus.
+
+properties:
+  $nodename:
+    pattern: "^ethernet-phy-package@[a-f0-9]+$"
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description:
+      The base ID number for the PHY package.
+      Commonly the ID of the first PHY in the PHY package.
+
+      Some PHY in the PHY package might be not defined but
+      still occupy ID on the device (just not attached to
+      anything) hence the PHY package reg might correspond
+      to a not attached PHY (offset 0).
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: true
diff --git a/Bindings/net/fsl,fec.yaml b/Bindings/net/fsl,fec.yaml
index 8948a11c99..5536c06139 100644
--- a/Bindings/net/fsl,fec.yaml
+++ b/Bindings/net/fsl,fec.yaml
@@ -224,6 +224,9 @@ properties:
       Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
       Other delays are invalid.
 
+  iommus:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/net/mediatek,net.yaml b/Bindings/net/mediatek,net.yaml
index e74502a0af..3202dc7967 100644
--- a/Bindings/net/mediatek,net.yaml
+++ b/Bindings/net/mediatek,net.yaml
@@ -337,8 +337,8 @@ allOf:
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@ allOf:
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@ allOf:
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object
diff --git a/Bindings/net/nfc/ti,trf7970a.yaml b/Bindings/net/nfc/ti,trf7970a.yaml
index 9cc236ec42..d0332eb76a 100644
--- a/Bindings/net/nfc/ti,trf7970a.yaml
+++ b/Bindings/net/nfc/ti,trf7970a.yaml
@@ -73,7 +73,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Bindings/net/qca,qca808x.yaml b/Bindings/net/qca,qca808x.yaml
new file mode 100644
index 0000000000..e255265590
--- /dev/null
+++ b/Bindings/net/qca,qca808x.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,qca808x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA808X PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  QCA808X PHYs can have up to 3 LEDs attached.
+  All 3 LEDs are disabled by default.
+  2 LEDs have dedicated pins with the 3rd LED having the
+  double function of Interrupt LEDs/GPIO or additional LED.
+
+  By default this special PIN is set to LED function.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id004d.d101
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id004d.d101";
+            reg = <0>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_WAN;
+                    default-state = "keep";
+                };
+            };
+        };
+    };
diff --git a/Bindings/net/qcom,ethqos.yaml b/Bindings/net/qcom,ethqos.yaml
index 7bdb412a01..69a337c7e3 100644
--- a/Bindings/net/qcom,ethqos.yaml
+++ b/Bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@ properties:
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - const: eth_lpi
+      - enum: [eth_lpi, sfty]
+      - const: sfty
 
   clocks:
     maxItems: 4
@@ -89,8 +91,9 @@ examples:
                <&gcc GCC_ETH_PTP_CLK>,
                <&gcc GCC_ETH_RGMII_CLK>;
       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-names = "macirq", "eth_lpi";
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi", "sfty";
 
       rx-fifo-depth = <4096>;
       tx-fifo-depth = <4096>;
diff --git a/Bindings/net/qcom,ipa.yaml b/Bindings/net/qcom,ipa.yaml
index c30218684c..53cae71d99 100644
--- a/Bindings/net/qcom,ipa.yaml
+++ b/Bindings/net/qcom,ipa.yaml
@@ -159,7 +159,7 @@ properties:
       when the AP (not the modem) performs early initialization.
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       If present, name (or relative path) of the file within the
       firmware search path containing the firmware image used when
diff --git a/Bindings/net/qcom,ipq4019-mdio.yaml b/Bindings/net/qcom,ipq4019-mdio.yaml
index 3407e909e8..0029e197a8 100644
--- a/Bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Bindings/net/qcom,ipq4019-mdio.yaml
@@ -44,6 +44,21 @@ properties:
     items:
       - const: gcc_mdio_ahb_clk
 
+  clock-frequency:
+    description:
+      The MDIO bus clock that must be output by the MDIO bus hardware, if
+      absent, the default hardware values are used.
+
+      MDC rate is feed by an external clock (fixed 100MHz) and is divider
+      internally. The default divider is /256 resulting in the default rate
+      applied of 390KHz.
+
+      To follow 802.3 standard that instruct up to 2.5MHz by default, if
+      this property is not declared and the divider is set to /256, by
+      default 1.5625Mhz is select.
+    enum: [ 390625, 781250, 1562500, 3125000, 6250000, 12500000 ]
+    default: 1562500
+
 required:
   - compatible
   - reg
diff --git a/Bindings/net/qcom,qca807x.yaml b/Bindings/net/qcom,qca807x.yaml
new file mode 100644
index 0000000000..7290024024
--- /dev/null
+++ b/Bindings/net/qcom,qca807x.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA807x Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm QCA8072/5 Ethernet PHY is PHY package of 2 or 5
+  IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
+  1000BASE-T PHY-s.
+
+  They feature 2 SerDes, one for PSGMII or QSGMII connection with
+  MAC, while second one is SGMII for connection to MAC or fiber.
+
+  Both models have a combo port that supports 1000BASE-X and
+  100BASE-FX fiber.
+
+  Each PHY inside of QCA807x series has 4 digitally controlled
+  output only pins that natively drive LED-s for up to 2 attached
+  LEDs. Some vendor also use these 4 output for GPIO usage without
+  attaching LEDs.
+
+  Note that output pins can be set to drive LEDs OR GPIO, mixed
+  definition are not accepted.
+
+$ref: ethernet-phy-package.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca8072-package
+      - qcom,qca8075-package
+
+  qcom,package-mode:
+    description: |
+      PHY package can be configured in 3 mode following this table:
+
+                    First Serdes mode       Second Serdes mode
+      Option 1      PSGMII for copper       Disabled
+                    ports 0-4
+      Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
+                    ports 0-4
+      Option 3      QSGMII for copper       SGMII for
+                    ports 0-3               copper port 4
+
+      PSGMII mode (option 1 or 2) is configured dynamically based on
+      the presence of a connected SFP device.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - qsgmii
+      - psgmii
+    default: psgmii
+
+  qcom,tx-drive-strength-milliwatt:
+    description: set the TX Amplifier value in mv.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [140, 160, 180, 200, 220,
+           240, 260, 280, 300, 320,
+           400, 500, 600]
+    default: 600
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      qcom,dac-full-amplitude:
+        description:
+          Set Analog MDI driver amplitude to FULL.
+
+          With this not defined, amplitude is set to DSP.
+          (amplitude is adjusted based on cable length)
+
+          With this enabled and qcom,dac-full-bias-current
+          and qcom,dac-disable-bias-current-tweak disabled,
+          bias current is half.
+        type: boolean
+
+      qcom,dac-full-bias-current:
+        description:
+          Set Analog MDI driver bias current to FULL.
+
+          With this not defined, bias current is set to DSP.
+          (bias current is adjusted based on cable length)
+
+          Actual bias current might be different with
+          qcom,dac-disable-bias-current-tweak disabled.
+        type: boolean
+
+      qcom,dac-disable-bias-current-tweak:
+        description: |
+          Set Analog MDI driver bias current to disable tweak
+          to bias current.
+
+          With this not defined, bias current tweak are enabled
+          by default.
+
+          With this enabled the following tweak are NOT applied:
+          - With both FULL amplitude and FULL bias current: bias current
+            is set to half.
+          - With only DSP amplitude: bias current is set to half and
+            is set to 1/4 with cable < 10m.
+          - With DSP bias current (included both DSP amplitude and
+            DSP bias current): bias current is half the detected current
+            with cable < 10m.
+        type: boolean
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+    if:
+      required:
+        - gpio-controller
+    then:
+      properties:
+        leds: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy-package@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "qcom,qca8075-package";
+            reg = <0>;
+
+            qcom,package-mode = "qsgmii";
+
+            ethernet-phy@0 {
+                reg = <0>;
+
+                leds {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_GREEN>;
+                        function = LED_FUNCTION_LAN;
+                        default-state = "keep";
+                    };
+                };
+            };
+
+            ethernet-phy@1 {
+                reg = <1>;
+            };
+
+            ethernet-phy@2 {
+                reg = <2>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            ethernet-phy@3 {
+                reg = <3>;
+            };
+
+            ethernet-phy@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Bindings/net/renesas,etheravb.yaml b/Bindings/net/renesas,etheravb.yaml
index 890f7858d0..de7ba7f345 100644
--- a/Bindings/net/renesas,etheravb.yaml
+++ b/Bindings/net/renesas,etheravb.yaml
@@ -46,6 +46,7 @@ properties:
           - enum:
               - renesas,etheravb-r8a779a0     # R-Car V3U
               - renesas,etheravb-r8a779g0     # R-Car V4H
+              - renesas,etheravb-r8a779h0     # R-Car V4M
           - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
 
       - items:
diff --git a/Bindings/net/snps,dwmac.yaml b/Bindings/net/snps,dwmac.yaml
index 5c2769dc68..6b0341a8e0 100644
--- a/Bindings/net/snps,dwmac.yaml
+++ b/Bindings/net/snps,dwmac.yaml
@@ -95,6 +95,7 @@ properties:
         - snps,dwmac-5.20
         - snps,dwxgmac
         - snps,dwxgmac-2.10
+        - starfive,jh7100-dwmac
         - starfive,jh7110-dwmac
 
   reg:
@@ -107,13 +108,15 @@ properties:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - enum: [eth_wake_irq, eth_lpi]
-      - const: eth_lpi
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
 
   clocks:
     minItems: 1
@@ -144,10 +147,12 @@ properties:
       - description: AHB reset
 
   reset-names:
-    minItems: 1
-    items:
-      - const: stmmaceth
-      - const: ahb
+    oneOf:
+      - items:
+          - enum: [stmmaceth, ahb]
+      - items:
+          - const: stmmaceth
+          - const: ahb
 
   power-domains:
     maxItems: 1
diff --git a/Bindings/net/starfive,jh7110-dwmac.yaml b/Bindings/net/starfive,jh7110-dwmac.yaml
index 5e7cfbbebc..0d1962980f 100644
--- a/Bindings/net/starfive,jh7110-dwmac.yaml
+++ b/Bindings/net/starfive,jh7110-dwmac.yaml
@@ -16,16 +16,20 @@ select:
     compatible:
       contains:
         enum:
+          - starfive,jh7100-dwmac
           - starfive,jh7110-dwmac
   required:
     - compatible
 
 properties:
   compatible:
-    items:
-      - enum:
-          - starfive,jh7110-dwmac
-      - const: snps,dwmac-5.20
+    oneOf:
+      - items:
+          - const: starfive,jh7100-dwmac
+          - const: snps,dwmac
+      - items:
+          - const: starfive,jh7110-dwmac
+          - const: snps,dwmac-5.20
 
   reg:
     maxItems: 1
@@ -46,24 +50,6 @@ properties:
       - const: tx
       - const: gtx
 
-  interrupts:
-    minItems: 3
-    maxItems: 3
-
-  interrupt-names:
-    minItems: 3
-    maxItems: 3
-
-  resets:
-    items:
-      - description: MAC Reset signal.
-      - description: AHB Reset signal.
-
-  reset-names:
-    items:
-      - const: stmmaceth
-      - const: ahb
-
   starfive,tx-use-rgmii-clk:
     description:
       Tx clock is provided by external rgmii clock.
@@ -94,6 +80,48 @@ required:
 allOf:
   - $ref: snps,dwmac.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7100-dwmac
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          const: ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-dwmac
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
+        resets:
+          minItems: 2
+
+        reset-names:
+          minItems: 2
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/net/ti,cpsw-switch.yaml b/Bindings/net/ti,cpsw-switch.yaml
index f07ae3173b..d5bd93ee4d 100644
--- a/Bindings/net/ti,cpsw-switch.yaml
+++ b/Bindings/net/ti,cpsw-switch.yaml
@@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI SoC Ethernet Switch Controller (CPSW)
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description:
   The 3-port switch gigabit ethernet subsystem provides ethernet packet
diff --git a/Bindings/net/ti,dp83822.yaml b/Bindings/net/ti,dp83822.yaml
index db74474207..784866ea39 100644
--- a/Bindings/net/ti,dp83822.yaml
+++ b/Bindings/net/ti,dp83822.yaml
@@ -62,6 +62,40 @@ properties:
        for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
        to transmit data.
 
+  ti,cfg-dac-minus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level -1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,cfg-dac-plus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level +1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,rmii-mode:
+    description: |
+       If present, select the RMII operation mode. Two modes are
+       available:
+         - RMII master, where the PHY outputs a 50MHz reference clock which can
+         be connected to the MAC.
+         - RMII slave, where the PHY expects a 50MHz reference clock input
+         shared with the MAC.
+       The RMII operation mode can also be configured by its straps.
+       If the strap pin is not set correctly or not set at all, then this can be
+       used to configure it.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - master
+      - slave
+
 required:
   - reg
 
diff --git a/Bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
index c9c25132d1..73ed5951d2 100644
--- a/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description:
   The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
diff --git a/Bindings/net/ti,k3-am654-cpts.yaml b/Bindings/net/ti,k3-am654-cpts.yaml
index 3e910d3b24..b1c8753257 100644
--- a/Bindings/net/ti,k3-am654-cpts.yaml
+++ b/Bindings/net/ti,k3-am654-cpts.yaml
@@ -7,8 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description: |+
   The TI AM654x/J721E CPTS module is used to facilitate host control of time
diff --git a/Bindings/net/wireless/mediatek,mt76.yaml b/Bindings/net/wireless/mediatek,mt76.yaml
index 252207adbc..eabceb8495 100644
--- a/Bindings/net/wireless/mediatek,mt76.yaml
+++ b/Bindings/net/wireless/mediatek,mt76.yaml
@@ -19,9 +19,6 @@ description: |
   Alternatively, it can specify the wireless part of the MT7628/MT7688
   or MT7622/MT7986 SoC.
 
-allOf:
-  - $ref: ieee80211.yaml#
-
 properties:
   compatible:
     enum:
@@ -38,7 +35,12 @@ properties:
       MT7986 should contain 3 regions consys, dcm, and sku, in this order.
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: major interrupt for rings
+      - description: additional interrupt for ring 19
+      - description: additional interrupt for ring 4
+      - description: additional interrupt for ring 5
 
   power-domains:
     maxItems: 1
@@ -217,6 +219,24 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: ieee80211.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7981-wmac
+              - mediatek,mt7986-wmac
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
@@ -293,7 +313,10 @@ examples:
         reg = <0x18000000 0x1000000>,
               <0x10003000 0x1000>,
               <0x11d10000 0x1000>;
-        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&topckgen 50>,
                  <&topckgen 62>;
         clock-names = "mcu", "ap2conn";
diff --git a/Bindings/net/wireless/qcom,ath10k.yaml b/Bindings/net/wireless/qcom,ath10k.yaml
index 7758a55dd3..9b3ef4bc37 100644
--- a/Bindings/net/wireless/qcom,ath10k.yaml
+++ b/Bindings/net/wireless/qcom,ath10k.yaml
@@ -8,6 +8,7 @@ title: Qualcomm Technologies ath10k wireless devices
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description:
   Qualcomm Technologies, Inc. IEEE 802.11ac devices.
diff --git a/Bindings/net/wireless/qcom,ath11k-pci.yaml b/Bindings/net/wireless/qcom,ath11k-pci.yaml
index 817f02a8b4..41d023797d 100644
--- a/Bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/Bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -9,6 +9,7 @@ title: Qualcomm Technologies ath11k wireless devices (PCIe)
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description: |
   Qualcomm Technologies IEEE 802.11ax PCIe devices
diff --git a/Bindings/net/wireless/qcom,ath11k.yaml b/Bindings/net/wireless/qcom,ath11k.yaml
index 7d5f982a3d..672282cdfc 100644
--- a/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/Bindings/net/wireless/qcom,ath11k.yaml
@@ -9,6 +9,7 @@ title: Qualcomm Technologies ath11k wireless devices
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
diff --git a/Bindings/nvmem/layouts/fixed-cell.yaml b/Bindings/nvmem/layouts/fixed-cell.yaml
index ac2381e660..8b3826243d 100644
--- a/Bindings/nvmem/layouts/fixed-cell.yaml
+++ b/Bindings/nvmem/layouts/fixed-cell.yaml
@@ -36,20 +36,18 @@ properties:
 
 allOf:
   - if:
+      properties:
+        compatible:
+          contains:
+            const: mac-base
       required: [ compatible ]
     then:
-      if:
-        properties:
-          compatible:
-            contains:
-              const: mac-base
-      then:
-        properties:
-          "#nvmem-cell-cells":
-            description: The first argument is a MAC address offset.
-            const: 1
-        required:
-          - "#nvmem-cell-cells"
+      properties:
+        "#nvmem-cell-cells":
+          description: The first argument is a MAC address offset.
+          const: 1
+      required:
+        - "#nvmem-cell-cells"
 
 required:
   - reg
diff --git a/Bindings/nvmem/nvmem-provider.yaml b/Bindings/nvmem/nvmem-provider.yaml
new file mode 100644
index 0000000000..4009a9a038
--- /dev/null
+++ b/Bindings/nvmem/nvmem-provider.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
+
+title: NVMEM (Non Volatile Memory) Provider
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+select: true
+
+properties:
+  '#nvmem-cell-cells':
+    enum: [0, 1]
+
+additionalProperties: true
diff --git a/Bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Bindings/nvmem/xlnx,zynqmp-nvmem.txt
deleted file mode 100644
index 4881561b3a..0000000000
--- a/Bindings/nvmem/xlnx,zynqmp-nvmem.txt
+++ /dev/null
@@ -1,46 +0,0 @@
---------------------------------------------------------------------------
-=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
---------------------------------------------------------------------------
-The nvmem_firmware node provides access to the hardware related data
-like soc revision, IDCODE... etc, By using the firmware interface.
-
-Required properties:
-- compatible: should be "xlnx,zynqmp-nvmem-fw"
-
-= Data cells =
-Are child nodes of silicon id, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
--------
- Example
--------
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		nvmem_firmware {
-			compatible = "xlnx,zynqmp-nvmem-fw";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* Data cells */
-			soc_revision: soc_revision {
-				reg = <0x0 0x4>;
-			};
-		};
-	};
-};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-	pcap {
-		...
-
-		nvmem-cells = <&soc_revision>;
-		nvmem-cell-names = "soc_revision";
-
-		...
-	};
diff --git a/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
new file mode 100644
index 0000000000..917c40d5c3
--- /dev/null
+++ b/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC Non Volatile Memory interface
+
+description: |
+    The ZynqMP MPSoC provides access to the hardware related data
+    like SOC revision, IDCODE and specific purpose efuses.
+
+maintainers:
+  - Kalyani Akula <kalyani.akula@amd.com>
+  - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-nvmem-fw
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nvmem {
+        compatible = "xlnx,zynqmp-nvmem-fw";
+        nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+        };
+    };
diff --git a/Bindings/opp/opp-v2-base.yaml b/Bindings/opp/opp-v2-base.yaml
index e2f8f7af3c..b1bb87c865 100644
--- a/Bindings/opp/opp-v2-base.yaml
+++ b/Bindings/opp/opp-v2-base.yaml
@@ -57,8 +57,6 @@ patternProperties:
           specific binding.
         minItems: 1
         maxItems: 32
-        items:
-          maxItems: 1
 
       opp-microvolt:
         description: |
diff --git a/Bindings/pci/fsl,imx6q-pcie-common.yaml b/Bindings/pci/fsl,imx6q-pcie-common.yaml
index d91b639ae7..a8b34f58f8 100644
--- a/Bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -150,22 +150,6 @@ allOf:
             - {}
             - const: pcie_phy
             - const: pcie_aux
-  - if:
-      properties:
-        compatible:
-          not:
-            contains:
-              enum:
-                - fsl,imx6sx-pcie
-                - fsl,imx8mq-pcie
-                - fsl,imx6sx-pcie-ep
-                - fsl,imx8mq-pcie-ep
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          maxItems: 3
 
   - if:
       properties:
@@ -223,6 +207,7 @@ allOf:
                 - fsl,imx6sx-pcie
                 - fsl,imx6q-pcie
                 - fsl,imx6qp-pcie
+                - fsl,imx95-pcie
                 - fsl,imx6sx-pcie-ep
                 - fsl,imx6q-pcie-ep
                 - fsl,imx6qp-pcie-ep
diff --git a/Bindings/pci/fsl,imx6q-pcie-ep.yaml b/Bindings/pci/fsl,imx6q-pcie-ep.yaml
index ee155ed5f1..a06f75df84 100644
--- a/Bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ b/Bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -22,14 +22,7 @@ properties:
       - fsl,imx8mm-pcie-ep
       - fsl,imx8mq-pcie-ep
       - fsl,imx8mp-pcie-ep
-
-  reg:
-    minItems: 2
-
-  reg-names:
-    items:
-      - const: dbi
-      - const: addr_space
+      - fsl,imx95-pcie-ep
 
   clocks:
     minItems: 3
@@ -62,11 +55,48 @@ required:
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
   - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie-ep
+            - fsl,imx8mq-pcie-ep
+            - fsl,imx8mp-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: addr_space
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 6
+        reg-names:
+          items:
+            - const: dbi
+            - const: atu
+            - const: dbi2
+            - const: app
+            - const: dma
+            - const: addr_space
+
   - if:
       properties:
         compatible:
           enum:
             - fsl,imx8mq-pcie-ep
+            - fsl,imx95-pcie-ep
     then:
       properties:
         clocks:
diff --git a/Bindings/pci/fsl,imx6q-pcie.yaml b/Bindings/pci/fsl,imx6q-pcie.yaml
index 81bbb8728f..8b8d77b115 100644
--- a/Bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Bindings/pci/fsl,imx6q-pcie.yaml
@@ -29,16 +29,7 @@ properties:
       - fsl,imx8mq-pcie
       - fsl,imx8mm-pcie
       - fsl,imx8mp-pcie
-
-  reg:
-    items:
-      - description: Data Bus Interface (DBI) registers.
-      - description: PCIe configuration space region.
-
-  reg-names:
-    items:
-      - const: dbi
-      - const: config
+      - fsl,imx95-pcie
 
   clocks:
     minItems: 3
@@ -90,6 +81,43 @@ required:
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie.yaml#
   - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6q-pcie
+            - fsl,imx6sx-pcie
+            - fsl,imx6qp-pcie
+            - fsl,imx7d-pcie
+            - fsl,imx8mq-pcie
+            - fsl,imx8mm-pcie
+            - fsl,imx8mp-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: config
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi
+            - const: config
+            - const: atu
+            - const: app
+
   - if:
       properties:
         compatible:
@@ -111,6 +139,7 @@ allOf:
         compatible:
           enum:
             - fsl,imx8mq-pcie
+            - fsl,imx95-pcie
     then:
       properties:
         clocks:
diff --git a/Bindings/pci/qcom,pcie-common.yaml b/Bindings/pci/qcom,pcie-common.yaml
new file mode 100644
index 0000000000..0d1b23523f
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-common.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI Express Root Complex Common Properties
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  reg:
+    minItems: 4
+    maxItems: 6
+
+  reg-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  reset-names:
+    minItems: 1
+    maxItems: 12
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - reg
+  - reg-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+additionalProperties: true
diff --git a/Bindings/pci/qcom,pcie-sa8775p.yaml b/Bindings/pci/qcom,pcie-sa8775p.yaml
new file mode 100644
index 0000000000..efde49d1be
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sa8775p.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775p PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sa8775p
+
+  reg:
+    minItems: 6
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 5
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+required:
+  - interconnects
+  - interconnect-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sa8775p";
+            reg = <0x0 0x01c00000 0x0 0x3000>,
+                  <0x0 0x40000000 0x0 0xf20>,
+                  <0x0 0x40000f20 0x0 0xa8>,
+                  <0x0 0x40001000 0x0 0x4000>,
+                  <0x0 0x40100000 0x0 0x100000>,
+                  <0x0 0x01c03000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                              "msi1",
+                              "msi2",
+                              "msi3",
+                              "msi4",
+                              "msi5",
+                              "msi6",
+                              "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+            interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+                        <0x100 &pcie_smmu 0x0001 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sc7280.yaml b/Bindings/pci/qcom,pcie-sc7280.yaml
new file mode 100644
index 0000000000..634da24ec3
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sc7280.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sc7280
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 13
+    maxItems: 13
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+  vddpe-3v3-supply:
+    description: PCIe endpoint power supply
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-sc7280";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x40000000 0 0xf1d>,
+                  <0 0x40000f20 0 0xa8>,
+                  <0 0x40001000 0 0x1000>,
+                  <0 0x40100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <1>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+                     <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+                     <&pcie1_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_1_AUX_CLK>,
+                     <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+                        <0x100 &apps_smmu 0x1c81 0x1>;
+
+            phys = <&pcie1_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie1_clkreq_n>;
+
+            power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+            resets = <&gcc GCC_PCIE_1_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            vddpe-3v3-supply = <&pp3300_ssd>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sc8180x.yaml b/Bindings/pci/qcom,pcie-sc8180x.yaml
new file mode 100644
index 0000000000..baf1813ec0
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sc8180x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180x PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sc8180x
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ref # REFERENCE clock
+      - const: tbu # PCIe TBU clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sc8180x";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf",
+                        "dbi",
+                        "elbi",
+                        "atu",
+                        "config";
+            ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_CLKREF_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ref",
+                          "tbu";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                          "msi1",
+                          "msi2",
+                          "msi3",
+                          "msi4",
+                          "msi5",
+                          "msi6",
+                          "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
+                            <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+                        <0x100 &apps_smmu 0x1d81 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sc8280xp.yaml b/Bindings/pci/qcom,pcie-sc8280xp.yaml
new file mode 100644
index 0000000000..25c9f13ae9
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sa8540p
+      - qcom,pcie-sc8280xp
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: noc_aggr_4 # NoC aggregate 4 clock
+      - const: noc_aggr_south_sf # NoC aggregate South SF clock
+      - const: cnoc_qx # Configuration NoC QX clock
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+required:
+  - interconnects
+  - interconnect-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c20000 {
+            compatible = "qcom,pcie-sc8280xp";
+            reg = <0x0 0x01c20000 0x0 0x3000>,
+                  <0x0 0x3c000000 0x0 0xf1d>,
+                  <0x0 0x3c000f20 0x0 0xa8>,
+                  <0x0 0x3c001000 0x0 0x1000>,
+                  <0x0 0x3c100000 0x0 0x100000>,
+                  <0x0 0x01c23000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            num-lanes = <4>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+            clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+                     <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "noc_aggr_4",
+                          "noc_aggr_south_sf";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+            interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            phys = <&pcie2a_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie2a_default>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_2A_GDSC>;
+
+            resets = <&gcc GCC_PCIE_2A_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+            vddpe-3v3-supply = <&vreg_nvme>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8150.yaml b/Bindings/pci/qcom,pcie-sm8150.yaml
new file mode 100644
index 0000000000..9d569644fd
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8150.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8150
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ref # REFERENCE clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8150";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ref";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+                        <0x100 &apps_smmu 0x1d81 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8250.yaml b/Bindings/pci/qcom,pcie-sm8250.yaml
new file mode 100644
index 0000000000..4d060bce6f
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8250.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8250
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    # Unfortunately the "optional" ref clock is used in the middle of the list
+    oneOf:
+      - items:
+          - const: pipe # PIPE clock
+          - const: aux # Auxiliary clock
+          - const: cfg # Configuration clock
+          - const: bus_master # Master AXI clock
+          - const: bus_slave # Slave AXI clock
+          - const: slave_q2a # Slave Q2A clock
+          - const: ref # REFERENCE clock
+          - const: tbu # PCIe TBU clock
+          - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - items:
+          - const: pipe # PIPE clock
+          - const: aux # Auxiliary clock
+          - const: cfg # Configuration clock
+          - const: bus_master # Master AXI clock
+          - const: bus_slave # Slave AXI clock
+          - const: slave_q2a # Slave Q2A clock
+          - const: tbu # PCIe TBU clock
+          - const: ddrss_sf_tbu # PCIe SF TBU clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8250";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>,
+                  <0 0x01c03000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8350.yaml b/Bindings/pci/qcom,pcie-sm8350.yaml
new file mode 100644
index 0000000000..9eb6e457b0
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8350.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8350
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+      - const: aggre0 # Aggre NoC PCIe0 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+oneOf:
+  - properties:
+      interrupts:
+        maxItems: 1
+      interrupt-names:
+        items:
+          - const: msi
+
+  - properties:
+      interrupts:
+        minItems: 8
+      interrupt-names:
+        items:
+          - const: msi0
+          - const: msi1
+          - const: msi2
+          - const: msi3
+          - const: msi4
+          - const: msi5
+          - const: msi6
+          - const: msi7
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8350";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu",
+                          "aggre1",
+                          "aggre0";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8450.yaml b/Bindings/pci/qcom,pcie-sm8450.yaml
new file mode 100644
index 0000000000..1496d6993a
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8450.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 11
+    maxItems: 12
+
+  clock-names:
+    minItems: 11
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8450-pcie0";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            max-link-speed = <2>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+                     <&pcie0_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+            msi-map = <0x0 &gic_its 0x5981 0x1>,
+                      <0x100 &gic_its 0x5980 0x1>;
+            msi-map-mask = <0xff00>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8550.yaml b/Bindings/pci/qcom,pcie-sm8550.yaml
new file mode 100644
index 0000000000..24cb386735
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8550.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,pcie-sm8550
+      - items:
+          - enum:
+              - qcom,pcie-sm8650
+          - const: qcom,pcie-sm8550
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8550";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "noc_aggr";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-x1e80100.yaml b/Bindings/pci/qcom,pcie-x1e80100.yaml
new file mode 100644
index 0000000000..1074310a8e
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-x1e80100.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-x1e80100
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-x1e80100";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x7c000000 0 0xf1d>,
+                  <0 0x7c000f40 0 0xa8>,
+                  <0 0x7c001000 0 0x1000>,
+                  <0 0x7c100000 0 0x100000>,
+                  <0 0x01c0b000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "noc_aggr",
+                          "cnoc_sf_axi";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie4_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+            resets = <&gcc GCC_PCIE_4_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie.yaml b/Bindings/pci/qcom,pcie.yaml
index a93ab3b540..cf9a6910b5 100644
--- a/Bindings/pci/qcom,pcie.yaml
+++ b/Bindings/pci/qcom,pcie.yaml
@@ -28,23 +28,8 @@ properties:
           - qcom,pcie-ipq8074-gen3
           - qcom,pcie-msm8996
           - qcom,pcie-qcs404
-          - qcom,pcie-sa8540p
-          - qcom,pcie-sa8775p
-          - qcom,pcie-sc7280
-          - qcom,pcie-sc8180x
-          - qcom,pcie-sc8280xp
           - qcom,pcie-sdm845
           - qcom,pcie-sdx55
-          - qcom,pcie-sm8150
-          - qcom,pcie-sm8250
-          - qcom,pcie-sm8350
-          - qcom,pcie-sm8450-pcie0
-          - qcom,pcie-sm8450-pcie1
-          - qcom,pcie-sm8550
-      - items:
-          - enum:
-              - qcom,pcie-sm8650
-          - const: qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -106,9 +91,6 @@ properties:
   vdda_refclk-supply:
     description: A phandle to the core analog power supply for IC which generates reference clock
 
-  vddpe-3v3-supply:
-    description: A phandle to the PCIe endpoint power supply
-
   phys:
     maxItems: 1
 
@@ -123,6 +105,9 @@ properties:
     description: GPIO controlled connection to PERST# signal
     maxItems: 1
 
+  required-opps:
+    maxItems: 1
+
   wake-gpios:
     description: GPIO controlled connection to WAKE# signal
     maxItems: 1
@@ -143,7 +128,6 @@ anyOf:
       - "#interrupt-cells"
   - required:
       - msi-map
-      - msi-map-mask
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
@@ -217,16 +201,7 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc7280
-              - qcom,pcie-sc8180x
-              - qcom,pcie-sc8280xp
               - qcom,pcie-sdx55
-              - qcom,pcie-sm8250
-              - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
-              - qcom,pcie-sm8550
     then:
       properties:
         reg:
@@ -451,65 +426,6 @@ allOf:
             - const: pwr # PWR reset
             - const: ahb # AHB reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc7280
-    then:
-      properties:
-        clocks:
-          minItems: 13
-          maxItems: 13
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc8180x
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 8
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ref # REFERENCE clock
-            - const: tbu # PCIe TBU clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       properties:
         compatible:
@@ -553,229 +469,6 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8150
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 8
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ref # REFERENCE clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8250
-    then:
-      oneOf:
-          # Unfortunately the "optional" ref clock is used in the middle of the list
-        - properties:
-            clocks:
-              minItems: 9
-              maxItems: 9
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: ref # REFERENCE clock
-                - const: tbu # PCIe TBU clock
-                - const: ddrss_sf_tbu # PCIe SF TBU clock
-        - properties:
-            clocks:
-              minItems: 8
-              maxItems: 8
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: tbu # PCIe TBU clock
-                - const: ddrss_sf_tbu # PCIe SF TBU clock
-      properties:
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8350
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 9
-        clock-names:
-          minItems: 8
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie0
-    then:
-      properties:
-        clocks:
-          minItems: 12
-          maxItems: 12
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie1
-    then:
-      properties:
-        clocks:
-          minItems: 11
-          maxItems: 11
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8550
-    then:
-      properties:
-        clocks:
-          minItems: 7
-          maxItems: 8
-        clock-names:
-          minItems: 7
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: noc_aggr # Aggre NoC PCIe AXI clock
-            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
-        resets:
-          minItems: 1
-          maxItems: 2
-        reset-names:
-          minItems: 1
-          items:
-            - const: pci # PCIe core reset
-            - const: link_down # PCIe link down reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8540p
-              - qcom,pcie-sc8280xp
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 9
-        clock-names:
-          minItems: 8
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: noc_aggr_4 # NoC aggregate 4 clock
-            - const: noc_aggr_south_sf # NoC aggregate South SF clock
-            - const: cnoc_qx # Configuration NoC QX clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       properties:
         compatible:
@@ -802,43 +495,6 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8775p
-    then:
-      properties:
-        clocks:
-          minItems: 5
-          maxItems: 5
-        clock-names:
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8540p
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc8280xp
-    then:
-      required:
-        - interconnects
-        - interconnect-names
-
   - if:
       not:
         properties:
@@ -874,16 +530,7 @@ allOf:
           contains:
             enum:
               - qcom,pcie-msm8996
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc7280
-              - qcom,pcie-sc8180x
               - qcom,pcie-sdm845
-              - qcom,pcie-sm8150
-              - qcom,pcie-sm8250
-              - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
-              - qcom,pcie-sm8550
     then:
       oneOf:
         - properties:
@@ -906,24 +553,6 @@ allOf:
                 - const: msi6
                 - const: msi7
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc8280xp
-    then:
-      properties:
-        interrupts:
-          minItems: 4
-          maxItems: 4
-        interrupt-names:
-          items:
-            - const: msi0
-            - const: msi1
-            - const: msi2
-            - const: msi3
-
   - if:
       properties:
         compatible:
@@ -938,7 +567,6 @@ allOf:
               - qcom,pcie-ipq8074
               - qcom,pcie-ipq8074-gen3
               - qcom,pcie-qcs404
-              - qcom,pcie-sa8540p
     then:
       properties:
         interrupts:
diff --git a/Bindings/perf/arm,coresight-pmu.yaml b/Bindings/perf/arm,coresight-pmu.yaml
new file mode 100644
index 0000000000..985b62990f
--- /dev/null
+++ b/Bindings/perf/arm,coresight-pmu.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,coresight-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Performance Monitoring Unit Architecture
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    const: arm,coresight-pmu
+
+  reg:
+    items:
+      - description: Register page 0
+      - description: Register page 1, if the PMU implements the dual-page extension
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: Overflow interrupt
+
+  cpus:
+    description: If the PMU is associated with a particular CPU or subset of CPUs,
+      array of phandles to the appropriate CPU node(s)
+
+  reg-io-width:
+    description: Granularity at which PMU register accesses are single-copy atomic
+    default: 4
+    enum: [4, 8]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/Bindings/perf/starfive,jh8100-starlink-pmu.yaml b/Bindings/perf/starfive,jh8100-starlink-pmu.yaml
new file mode 100644
index 0000000000..915c6b8140
--- /dev/null
+++ b/Bindings/perf/starfive,jh8100-starlink-pmu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH8100 StarLink PMU
+
+maintainers:
+  - Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
+
+description:
+  StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a
+  shared L3 memory system. The PMU support overflow interrupt, up to
+  16 programmable 64bit event counters, and an independent 64bit cycle
+  counter. StarFive's JH8100 StarLink PMU is accessed via MMIO.
+
+properties:
+  compatible:
+    const: starfive,jh8100-starlink-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@12900000 {
+            compatible = "starfive,jh8100-starlink-pmu";
+            reg = <0x0 0x12900000 0x0 0x10000>;
+            interrupts = <34>;
+        };
+    };
diff --git a/Bindings/phy/mediatek,mt8365-csi-rx.yaml b/Bindings/phy/mediatek,mt8365-csi-rx.yaml
new file mode 100644
index 0000000000..2127a5732f
--- /dev/null
+++ b/Bindings/phy/mediatek,mt8365-csi-rx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Sensor Interface MIPI CSI CD-PHY
+
+maintainers:
+  - Julien Stephan <jstephan@baylibre.com>
+  - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+  The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
+  receivers. The number of PHYs depends on the SoC model.
+  Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
+  capable.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8365-csi-rx
+
+  reg:
+    maxItems: 1
+
+  num-lanes:
+    enum: [2, 3, 4]
+
+  '#phy-cells':
+    enum: [0, 1]
+    description: |
+      If the PHY doesn't support mode selection then #phy-cells must be 0 and
+      PHY mode is described using phy-type property.
+      If the PHY supports mode selection, then #phy-cells must be 1 and mode
+      is set in the PHY cells. Supported modes are:
+        - PHY_TYPE_DPHY
+        - PHY_TYPE_CPHY
+      See include/dt-bindings/phy/phy.h for constants.
+
+  phy-type:
+    description:
+      If the PHY doesn't support mode selection then this set the operating mode.
+      See include/dt-bindings/phy/phy.h for constants.
+    const: 10
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - num-lanes
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      csi0_rx: phy@11c10000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c10000 0 0x2000>;
+        num-lanes = <2>;
+        #phy-cells = <1>;
+      };
+
+      csi1_rx: phy@11c12000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c12000 0 0x2000>;
+        phy-type = <PHY_TYPE_DPHY>;
+        num-lanes = <2>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git a/Bindings/phy/phy-cadence-torrent.yaml b/Bindings/phy/phy-cadence-torrent.yaml
index dfb31314fa..15dc8efe6f 100644
--- a/Bindings/phy/phy-cadence-torrent.yaml
+++ b/Bindings/phy/phy-cadence-torrent.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - cdns,torrent-phy
+      - ti,j7200-serdes-10g
       - ti,j721e-serdes-10g
 
   '#address-cells':
@@ -35,14 +36,18 @@ properties:
     minItems: 1
     maxItems: 2
     description:
-      PHY reference clock for 1 item. Must contain an entry in clock-names.
-      Optional Parent to enable output reference clock.
+      PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1).
+      pll1_refclk is optional and used for multi-protocol configurations requiring
+      separate reference clock for each protocol.
+      Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used.
+      Optional parent clock (phy_en_refclk) to enable a reference clock output feature
+      on some platforms to output either derived or received reference clock.
 
   clock-names:
     minItems: 1
     items:
       - const: refclk
-      - const: phy_en_refclk
+      - enum: [ pll1_refclk, phy_en_refclk ]
 
   reg:
     minItems: 1
diff --git a/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
new file mode 100644
index 0000000000..f1f4e4f833
--- /dev/null
+++ b/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, MSM8998)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for USB-C on
+  several Qualcomm chipsets.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sdm660-qmp-usb3-phy
+      - qcom,sm6115-qmp-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  qcom,tcsr-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the VLS CLAMP register
+    description: Clamp register present in the TCSR
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+  - qcom,tcsr-reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdm660-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@c010000 {
+      compatible = "qcom,msm8998-qmp-usb3-phy";
+      reg = <0x0c010000 0x1000>;
+
+      clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_CLKREF_CLK>,
+               <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+               <&gcc GCC_USB3_PHY_PIPE_CLK>;
+      clock-names = "aux",
+                    "ref",
+                    "cfg_ahb",
+                    "pipe";
+      clock-output-names = "usb3_phy_pipe_clk_src";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      resets = <&gcc GCC_USB3_PHY_BCR>,
+               <&gcc GCC_USB3PHY_PHY_BCR>;
+      reset-names = "phy",
+                    "phy_phy";
+
+      vdda-phy-supply = <&vreg_l1a_0p875>;
+      vdda-pll-supply = <&vreg_l2a_1p2>;
+
+      orientation-switch;
+
+      qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          endpoint {
+            remote-endpoint = <&pmic_typec_mux_in>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          endpoint {
+            remote-endpoint = <&usb_dwc3_ss>;
+          };
+        };
+      };
+    };
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 6c03f2d5fc..ba966a78a1 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -38,6 +38,8 @@ properties:
       - qcom,sm8550-qmp-gen4x2-pcie-phy
       - qcom,sm8650-qmp-gen3x2-pcie-phy
       - qcom,sm8650-qmp-gen4x2-pcie-phy
+      - qcom,x1e80100-qmp-gen3x2-pcie-phy
+      - qcom,x1e80100-qmp-gen4x2-pcie-phy
 
   reg:
     minItems: 1
@@ -151,6 +153,8 @@ allOf:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen3x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -194,6 +198,8 @@ allOf:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         resets:
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 8474eef8d0..91a6cc38ff 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -19,6 +19,7 @@ properties:
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,sa8775p-qmp-ufs-phy
+      - qcom,sc7180-qmp-ufs-phy
       - qcom,sc7280-qmp-ufs-phy
       - qcom,sc8180x-qmp-ufs-phy
       - qcom,sc8280xp-qmp-ufs-phy
@@ -38,15 +39,12 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 1
+    minItems: 2
     maxItems: 3
 
   clock-names:
-    minItems: 1
-    items:
-      - const: ref
-      - const: ref_aux
-      - const: qref
+    minItems: 2
+    maxItems: 3
 
   power-domains:
     maxItems: 1
@@ -86,22 +84,9 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8998-qmp-ufs-phy
               - qcom,sa8775p-qmp-ufs-phy
               - qcom,sc7280-qmp-ufs-phy
-              - qcom,sm8450-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          minItems: 3
-        clock-names:
-          minItems: 3
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
               - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
@@ -112,14 +97,19 @@ allOf:
               - qcom,sm8150-qmp-ufs-phy
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
               - qcom,sm8650-qmp-ufs-phy
     then:
       properties:
         clocks:
-          maxItems: 2
+          minItems: 3
+          maxItems: 3
         clock-names:
-          maxItems: 2
+          items:
+            - const: ref
+            - const: ref_aux
+            - const: qref
 
   - if:
       properties:
@@ -130,22 +120,28 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 1
+          minItems: 2
+          maxItems: 2
         clock-names:
-          maxItems: 1
+          items:
+            - const: ref
+            - const: qref
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
     ufs_mem_phy: phy@1d87000 {
         compatible = "qcom,sc8280xp-qmp-ufs-phy";
         reg = <0x01d87000 0x1000>;
 
-        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-        clock-names = "ref", "ref_aux";
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+                 <&gcc GCC_UFS_REF_CLKREF_CLK>;
+
+        clock-names = "ref", "ref_aux", "qref";
 
         power-domains = <&gcc UFS_PHY_GDSC>;
 
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 15d82c67f1..1e2d4ddc53 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,15 +20,12 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
-      - qcom,msm8998-qmp-usb3-phy
-      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
       - qcom,sdx75-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-usb3-uni-phy
@@ -93,7 +90,6 @@ allOf:
               - qcom,ipq8074-qmp-usb3-phy
               - qcom,ipq9574-qmp-usb3-phy
               - qcom,msm8996-qmp-usb3-phy
-              - qcom,msm8998-qmp-usb3-phy
               - qcom,sdx55-qmp-usb3-uni-phy
               - qcom,sdx65-qmp-usb3-uni-phy
               - qcom,sdx75-qmp-usb3-uni-phy
@@ -108,24 +104,6 @@ allOf:
             - const: cfg_ahb
             - const: pipe
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,qcm2290-qmp-usb3-phy
-              - qcom,sm6115-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 4
-        clock-names:
-          items:
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-            - const: pipe
-
   - if:
       properties:
         compatible:
diff --git a/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml b/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml
new file mode 100644
index 0000000000..54e822c715
--- /dev/null
+++ b/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3588-hdptx-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC HDMI/eDP Transmitter Combo PHY
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-hdptx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock
+      - description: APB clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: apb
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    items:
+      - description: PHY reset line
+      - description: APB reset line
+      - description: INIT reset line
+      - description: CMN reset line
+      - description: LANE reset line
+      - description: ROPLL reset line
+      - description: LCPLL reset line
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: init
+      - const: cmn
+      - const: lane
+      - const: ropll
+      - const: lcpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Some PHY related data is accessed through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - resets
+  - reset-names
+  - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      phy@fed60000 {
+        compatible = "rockchip,rk3588-hdptx-phy";
+        reg = <0x0 0xfed60000 0x0 0x2000>;
+        clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
+        clock-names = "ref", "apb";
+        #phy-cells = <0>;
+        resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
+                 <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
+                 <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>,
+                 <&cru SRST_HDPTX0_LCPLL>;
+        reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", "lcpll";
+        rockchip,grf = <&hdptxphy_grf>;
+      };
+    };
diff --git a/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
index c7df4cd341..d9e0b2c48e 100644
--- a/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
+++ b/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -24,7 +24,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
index 0942ea60c6..108719bde0 100644
--- a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
+++ b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
@@ -21,7 +21,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
index e3c8bde305..dc277f2e2e 100644
--- a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
+++ b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
@@ -21,7 +21,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
index c1b03147e8..add83c6763 100644
--- a/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
+++ b/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
@@ -29,7 +29,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
index 4ec85b8248..412bbcc276 100644
--- a/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
+++ b/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -29,7 +29,7 @@ required:
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/atmel,at91-pinctrl.txt b/Bindings/pinctrl/atmel,at91-pinctrl.txt
index e8abbdad7b..0aa1a53012 100644
--- a/Bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -20,6 +20,7 @@ such as pull-up, multi drive, etc.
 Required properties for iomux controller:
 - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
 		or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
+		or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl"
 - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
   configured in this periph mode. All the periph and bank need to be describe.
 
@@ -120,6 +121,7 @@ Some requirements for using atmel,at91rm9200-pinctrl binding:
 For each bank the required properties are:
 - compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
   "microchip,sam9x60-gpio"
+  or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"
 - reg: physical base address and length of the controller's registers
 - interrupts: interrupt outputs from the controller
 - interrupt-controller: marks the device node as an interrupt controller
diff --git a/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml
new file mode 100644
index 0000000000..98c310a3c6
--- /dev/null
+++ b/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW9523/AW9523B I2C GPIO Expander
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function
+  I/O, 256 steps PWM mode and interrupt support.
+
+properties:
+  compatible:
+    const: awinic,aw9523-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    description: |
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Specifies the INTN pin IRQ.
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-5])$"
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the
+          specified pins.
+
+        enum: [ gpio, pwm ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-open-drain: true
+      drive-push-pull: true
+      input-enable: true
+      input-disable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  # Example configuration to drive pins for a keyboard matrix
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        aw9523: gpio-expander@58 {
+                compatible = "awinic,aw9523-pinctrl";
+                reg = <0x58>;
+                interrupt-parent = <&tlmm>;
+                interrupts = <50 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 16>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+
+                keyboard-matrix-col-pins {
+                        pins = "gpio8", "gpio9", "gpio10", "gpio11",
+                               "gpio12", "gpio13", "gpio14", "gpio15";
+                        function = "gpio";
+                        input-disable;
+                        output-low;
+                };
+
+                keyboard-matrix-row-pins {
+                        pins = "gpio0", "gpio1", "gpio2", "gpio3",
+                               "gpio4", "gpio5", "gpio6", "gpio7";
+                        function = "gpio";
+                        bias-pull-up;
+                        drive-open-drain;
+                        input-enable;
+                };
+        };
+    };
diff --git a/Bindings/pinctrl/cirrus,madera.yaml b/Bindings/pinctrl/cirrus,madera.yaml
index bb61a30321..482acda88e 100644
--- a/Bindings/pinctrl/cirrus,madera.yaml
+++ b/Bindings/pinctrl/cirrus,madera.yaml
@@ -93,7 +93,8 @@ properties:
 
           input-schmitt-disable: true
 
-          input-debounce: true
+          input-debounce:
+            maxItems: 1
 
           output-low: true
 
diff --git a/Bindings/pinctrl/cypress,cy8c95x0.yaml b/Bindings/pinctrl/cypress,cy8c95x0.yaml
index 7f30ec2f1e..700ac86c26 100644
--- a/Bindings/pinctrl/cypress,cy8c95x0.yaml
+++ b/Bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -45,7 +45,8 @@ properties:
     maxItems: 1
 
   gpio-reserved-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 60
 
   vdd-supply:
     description:
@@ -85,6 +86,8 @@ patternProperties:
 
       bias-disable: true
 
+      input-enable: true
+
       output-high: true
 
       output-low: true
@@ -133,6 +136,23 @@ examples:
         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
         interrupt-controller;
         vdd-supply = <&p3v3>;
-        gpio-reserved-ranges = <5 1>;
+        gpio-reserved-ranges = <1 2>, <6 1>, <10 1>, <15 1>;
+
+        pinctrl-0 = <&U62160_pins>, <&U62160_ipins>;
+        pinctrl-names = "default";
+
+        U62160_pins: cfg-pins {
+          pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
+
+        U62160_ipins: icfg-pins {
+          pins = "gp04", "gp17", "gp21", "gp52", "gp53";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
       };
     };
diff --git a/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt
deleted file mode 100644
index 7ca4f6118d..0000000000
--- a/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Freescale i.MX6 UltraLite IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or
-  "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller.
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX6 UltraLite
-  Reference Manual for detailed CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (0 << 6)
-PAD_CTL_SPEED_MED               (1 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_260ohm              (1 << 3)
-PAD_CTL_DSE_130ohm              (2 << 3)
-PAD_CTL_DSE_87ohm               (3 << 3)
-PAD_CTL_DSE_65ohm               (4 << 3)
-PAD_CTL_DSE_52ohm               (5 << 3)
-PAD_CTL_DSE_43ohm               (6 << 3)
-PAD_CTL_DSE_37ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml b/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
new file mode 100644
index 0000000000..906b264a9e
--- /dev/null
+++ b/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX6UL IOMUX Controller
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6ul-iomuxc
+      - fsl,imx6ull-iomuxc-snvs
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer
+          CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX6UL Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied:
+                  PAD_CTL_HYS                     (1 << 16)
+                  PAD_CTL_PUS_100K_DOWN           (0 << 14)
+                  PAD_CTL_PUS_47K_UP              (1 << 14)
+                  PAD_CTL_PUS_100K_UP             (2 << 14)
+                  PAD_CTL_PUS_22K_UP              (3 << 14)
+                  PAD_CTL_PUE                     (1 << 13)
+                  PAD_CTL_PKE                     (1 << 12)
+                  PAD_CTL_ODE                     (1 << 11)
+                  PAD_CTL_SPEED_LOW               (0 << 6)
+                  PAD_CTL_SPEED_MED               (1 << 6)
+                  PAD_CTL_SPEED_HIGH              (3 << 6)
+                  PAD_CTL_DSE_DISABLE             (0 << 3)
+                  PAD_CTL_DSE_260ohm              (1 << 3)
+                  PAD_CTL_DSE_130ohm              (2 << 3)
+                  PAD_CTL_DSE_87ohm               (3 << 3)
+                  PAD_CTL_DSE_65ohm               (4 << 3)
+                  PAD_CTL_DSE_52ohm               (5 << 3)
+                  PAD_CTL_DSE_43ohm               (6 << 3)
+                  PAD_CTL_DSE_37ohm               (7 << 3)
+                  PAD_CTL_SRE_FAST                (1 << 0)
+                  PAD_CTL_SRE_SLOW                (0 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: pinctrl@20e0000 {
+      compatible = "fsl,imx6ul-iomuxc";
+      reg = <0x020e0000 0x4000>;
+
+      mux_uart: uartgrp {
+        fsl,pins = <
+          0x0084 0x0310 0x0000 0 0 0x1b0b1
+          0x0088 0x0314 0x0624 0 3 0x1b0b1
+        >;
+      };
+    };
+  - |
+    iomuxc_snvs: pinctrl@2290000 {
+      compatible = "fsl,imx6ull-iomuxc-snvs";
+      reg = <0x02290000 0x4000>;
+
+      pinctrl_snvs_usbc_det: snvsusbcdetgrp {
+        fsl,pins = <
+          0x0010 0x0054 0x0000 0x5 0x0 0x130b0
+        >;
+      };
+    };
diff --git a/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
new file mode 100644
index 0000000000..5f00604bf4
--- /dev/null
+++ b/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 pin controller
+
+description: >
+  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
+  to a system-controller block called OLB.
+
+  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
+  muxing supports two functions for each pin: first is GPIO, second is
+  pin-dependent.
+
+  Pins and groups are bijective.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+$ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mobileye,eyeq5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "-pins?$":
+    type: object
+    description: Pin muxing configuration.
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index 3e84728988..b55d9c3166 100644
--- a/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ b/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -152,7 +152,6 @@ patternProperties:
         description:
           Debouncing periods in microseconds, one period per interrupt
           bank found in the controller
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 4
 
@@ -160,7 +159,6 @@ patternProperties:
         description: |
           0: Low rate
           1: High rate
-        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
       drive-strength:
diff --git a/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
index 7b7f840ffc..08442c880f 100644
--- a/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
+++ b/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -103,7 +103,8 @@ patternProperties:
         items:
           pattern: "^gpio1?[0-9]{1,2}$"
 
-      input-debounce: true
+      input-debounce:
+        maxItems: 1
 
     additionalProperties: false
 
diff --git a/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
index f3deda9f71..db8224dfba 100644
--- a/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
+++ b/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -10,18 +10,21 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-$ref: nvidia,tegra234-pinmux-common.yaml
-
 properties:
   compatible:
     const: nvidia,tegra234-pinmux-aon
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^pinmux(-[a-z0-9-]+)?$":
     type: object
 
     # pin groups
     additionalProperties:
+      $ref: nvidia,tegra234-pinmux-common.yaml
+
       properties:
         nvidia,pins:
           items:
diff --git a/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
index 4f9de78085..8cf9e4c915 100644
--- a/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
+++ b/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -10,57 +10,43 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-properties:
-  reg:
-    items:
-      - description: pinmux registers
-
-patternProperties:
-  "^pinmux(-[a-z0-9-]+)?$":
-    type: object
-
-    # pin groups
-    additionalProperties:
-      $ref: nvidia,tegra-pinmux-common.yaml
-      # We would typically use unevaluatedProperties here but that has the
-      # downside that all the properties in the common bindings become valid
-      # for all chip generations. In this case, however, we want the per-SoC
-      # bindings to be able to override which of the common properties are
-      # allowed, since not all pinmux generations support the same sets of
-      # properties. This way, the common bindings define the format of the
-      # properties but the per-SoC bindings define which of them apply to a
-      # given chip.
-      additionalProperties: false
-      properties:
-        nvidia,function:
-          enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
-                  eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
-                  pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
-                  sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
-                  usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
-                  i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
-                  dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
-                  ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
-                  displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
-                  tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+$ref: nvidia,tegra-pinmux-common.yaml
 
-        # out of the common properties, only these are allowed for Tegra234
-        nvidia,pins: true
-        nvidia,pull: true
-        nvidia,tristate: true
-        nvidia,schmitt: true
-        nvidia,enable-input: true
-        nvidia,open-drain: true
-        nvidia,lock: true
-        nvidia,drive-type: true
-        nvidia,io-hv: true
-
-      required:
-        - nvidia,pins
+properties:
+  nvidia,function:
+    enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+            eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+            pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+            sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+            usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+            i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+            dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+            ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+            displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+            tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+  # out of the common properties, only these are allowed for Tegra234
+  nvidia,pins: true
+  nvidia,pull: true
+  nvidia,tristate: true
+  nvidia,schmitt: true
+  nvidia,enable-input: true
+  nvidia,open-drain: true
+  nvidia,lock: true
+  nvidia,drive-type: true
+  nvidia,io-hv: true
 
 required:
-  - compatible
-  - reg
+  - nvidia,pins
+
+# We would typically use unevaluatedProperties here but that has the
+# downside that all the properties in the common bindings become valid
+# for all chip generations. In this case, however, we want the per-SoC
+# bindings to be able to override which of the common properties are
+# allowed, since not all pinmux generations support the same sets of
+# properties. This way, the common bindings define the format of the
+# properties but the per-SoC bindings define which of them apply to a
+# given chip.
+additionalProperties: false
 
-additionalProperties: true
 ...
diff --git a/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml
index 17b865ecfc..f5a3a881de 100644
--- a/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml
+++ b/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -10,18 +10,21 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-$ref: nvidia,tegra234-pinmux-common.yaml
-
 properties:
   compatible:
     const: nvidia,tegra234-pinmux
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^pinmux(-[a-z0-9-]+)?$":
     type: object
 
     # pin groups
     additionalProperties:
+      $ref: nvidia,tegra234-pinmux-common.yaml
+
       properties:
         nvidia,pins:
           items:
diff --git a/Bindings/pinctrl/pincfg-node.yaml b/Bindings/pinctrl/pincfg-node.yaml
index be81ed22a0..d0af21a564 100644
--- a/Bindings/pinctrl/pincfg-node.yaml
+++ b/Bindings/pinctrl/pincfg-node.yaml
@@ -97,7 +97,7 @@ properties:
     description: disable schmitt-trigger mode
 
   input-debounce:
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Takes the debounce time in usec as argument or 0 to disable
       debouncing
 
diff --git a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb08ca5a15..bb675c8ec2 100644
--- a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -17,7 +17,7 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,sm4450-pinctrl
+    const: qcom,sm4450-tlmm
 
   reg:
     maxItems: 1
diff --git a/Bindings/pinctrl/renesas,pfc.yaml b/Bindings/pinctrl/renesas,pfc.yaml
index 181cd1676c..5d84364d13 100644
--- a/Bindings/pinctrl/renesas,pfc.yaml
+++ b/Bindings/pinctrl/renesas,pfc.yaml
@@ -46,6 +46,7 @@ properties:
       - renesas,pfc-r8a779a0    # R-Car V3U
       - renesas,pfc-r8a779f0    # R-Car S4-8
       - renesas,pfc-r8a779g0    # R-Car V4H
+      - renesas,pfc-r8a779h0    # R-Car V4M
       - renesas,pfc-sh73a0      # SH-Mobile AG5
 
   reg:
diff --git a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index d476de82e5..4d5a957fa2 100644
--- a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -120,7 +120,9 @@ additionalProperties:
         slew-rate: true
         gpio-hog: true
         gpios: true
+        input: true
         input-enable: true
+        output-enable: true
         output-high: true
         output-low: true
         line-name: true
diff --git a/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Bindings/pinctrl/xlnx,pinctrl-zynq.yaml
similarity index 98%
rename from Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
rename to Bindings/pinctrl/xlnx,pinctrl-zynq.yaml
index d2676f92ef..de6c10ba36 100644
--- a/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Bindings/pinctrl/xlnx,pinctrl-zynq.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/xlnx,pinctrl-zynq.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xilinx Zynq Pinctrl
@@ -28,7 +28,7 @@ description: |
 
 properties:
   compatible:
-    const: xlnx,zynq-pinctrl
+    const: xlnx,pinctrl-zynq
 
   reg:
     description: Specifies the base address and size of the SLCR space.
@@ -181,7 +181,7 @@ examples:
   - |
     #include <dt-bindings/pinctrl/pinctrl-zynq.h>
     pinctrl0: pinctrl@700 {
-       compatible = "xlnx,zynq-pinctrl";
+       compatible = "xlnx,pinctrl-zynq";
        reg = <0x700 0x200>;
        syscon = <&slcr>;
 
diff --git a/Bindings/power/qcom,rpmpd.yaml b/Bindings/power/qcom,rpmpd.yaml
index 2ff246cf8b..929b7ef9c1 100644
--- a/Bindings/power/qcom,rpmpd.yaml
+++ b/Bindings/power/qcom,rpmpd.yaml
@@ -24,6 +24,8 @@ properties:
           - qcom,msm8917-rpmpd
           - qcom,msm8939-rpmpd
           - qcom,msm8953-rpmpd
+          - qcom,msm8974-rpmpd
+          - qcom,msm8974pro-pma8084-rpmpd
           - qcom,msm8976-rpmpd
           - qcom,msm8994-rpmpd
           - qcom,msm8996-rpmpd
diff --git a/Bindings/power/renesas,rcar-sysc.yaml b/Bindings/power/renesas,rcar-sysc.yaml
index 0720b54881..e76fb27349 100644
--- a/Bindings/power/renesas,rcar-sysc.yaml
+++ b/Bindings/power/renesas,rcar-sysc.yaml
@@ -45,6 +45,7 @@ properties:
       - renesas,r8a779a0-sysc # R-Car V3U
       - renesas,r8a779f0-sysc # R-Car S4-8
       - renesas,r8a779g0-sysc # R-Car V4H
+      - renesas,r8a779h0-sysc # R-Car V4M
 
   reg:
     maxItems: 1
diff --git a/Bindings/power/wakeup-source.txt b/Bindings/power/wakeup-source.txt
index 75bc20b956..a6c8978964 100644
--- a/Bindings/power/wakeup-source.txt
+++ b/Bindings/power/wakeup-source.txt
@@ -27,7 +27,7 @@ List of legacy properties and respective binding document
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
-5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
 6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
 
 Examples
diff --git a/Bindings/pwm/atmel,hlcdc-pwm.yaml b/Bindings/pwm/atmel,hlcdc-pwm.yaml
new file mode 100644
index 0000000000..0e92868a2b
--- /dev/null
+++ b/Bindings/pwm/atmel,hlcdc-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCDC's PWM controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block
+  generates the LCD contrast control signal (LCD_PWM) that controls the
+  display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be
+  converted to an analog voltage with a simple passive filter. LCD display
+  panels have different backlight specifications in terms of minimum/maximum
+  values for PWM frequency. If the LCDC PWM frequency range does not match the
+  LCD display panel, it is possible to use the standalone PWM Controller to
+  drive the backlight.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-pwm
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - "#pwm-cells"
+
+additionalProperties: false
diff --git a/Bindings/pwm/atmel-hlcdc-pwm.txt b/Bindings/pwm/atmel-hlcdc-pwm.txt
deleted file mode 100644
index afa501bf7f..0000000000
--- a/Bindings/pwm/atmel-hlcdc-pwm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
-
-The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
-See ../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,hlcdc-pwm"
- - pinctr-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the pinctrl states described by pinctrl
-   default.
- - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
-   bindings defined in pwm.yaml in this directory.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git a/Bindings/pwm/marvell,pxa-pwm.yaml b/Bindings/pwm/marvell,pxa-pwm.yaml
new file mode 100644
index 0000000000..ba6325575e
--- /dev/null
+++ b/Bindings/pwm/marvell,pxa-pwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA PWM
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa250-pwm
+      - marvell,pxa270-pwm
+      - marvell,pxa168-pwm
+      - marvell,pxa910-pwm
+
+  reg:
+    # Length should be 0x10
+    maxItems: 1
+
+  "#pwm-cells":
+    # Used for specifying the period length in nanoseconds
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/pxa-clock.h>
+
+    pwm0: pwm@40b00000 {
+      compatible = "marvell,pxa250-pwm";
+      reg = <0x40b00000 0x10>;
+      #pwm-cells = <1>;
+      clocks = <&clks CLK_PWM0>;
+    };
diff --git a/Bindings/pwm/mediatek,mt2712-pwm.yaml b/Bindings/pwm/mediatek,mt2712-pwm.yaml
index 0fbe8a6469..a5c3088016 100644
--- a/Bindings/pwm/mediatek,mt2712-pwm.yaml
+++ b/Bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -24,6 +24,7 @@ properties:
           - mediatek,mt7629-pwm
           - mediatek,mt7981-pwm
           - mediatek,mt7986-pwm
+          - mediatek,mt7988-pwm
           - mediatek,mt8183-pwm
           - mediatek,mt8365-pwm
           - mediatek,mt8516-pwm
diff --git a/Bindings/pwm/mediatek,pwm-disp.yaml b/Bindings/pwm/mediatek,pwm-disp.yaml
index afcdeed4e8..bc813fe74f 100644
--- a/Bindings/pwm/mediatek,pwm-disp.yaml
+++ b/Bindings/pwm/mediatek,pwm-disp.yaml
@@ -52,6 +52,9 @@ properties:
       - const: main
       - const: mm
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/pwm/opencores,pwm.yaml b/Bindings/pwm/opencores,pwm.yaml
new file mode 100644
index 0000000000..52a59d245c
--- /dev/null
+++ b/Bindings/pwm/opencores,pwm.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores PWM controller
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+description:
+  The OpenCores PTC ip core contains a PWM controller. When operating in PWM
+  mode, the PTC core generates binary signal with user-programmable low and
+  high periods. All PTC counters and registers are 32-bit.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7100-pwm
+          - starfive,jh7110-pwm
+          - starfive,jh8100-pwm
+      - const: opencores,pwm-v1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@12490000 {
+        compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+        reg = <0x12490000 0x10000>;
+        clocks = <&clkgen 181>;
+        resets = <&rstgen 109>;
+        #pwm-cells = <3>;
+    };
diff --git a/Bindings/pwm/pwm-amlogic.yaml b/Bindings/pwm/pwm-amlogic.yaml
index 527864a4d8..1d71d4f8f3 100644
--- a/Bindings/pwm/pwm-amlogic.yaml
+++ b/Bindings/pwm/pwm-amlogic.yaml
@@ -9,9 +9,6 @@ title: Amlogic PWM
 maintainers:
   - Heiner Kallweit <hkallweit1@gmail.com>
 
-allOf:
-  - $ref: pwm.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -24,31 +21,40 @@ properties:
           - amlogic,meson-g12a-ee-pwm
           - amlogic,meson-g12a-ao-pwm-ab
           - amlogic,meson-g12a-ao-pwm-cd
-          - amlogic,meson-s4-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson-gx-pwm
           - const: amlogic,meson-gxbb-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson-gx-ao-pwm
           - const: amlogic,meson-gxbb-ao-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson8-pwm
           - const: amlogic,meson8b-pwm
+        deprecated: true
+      - enum:
+          - amlogic,meson8-pwm-v2
+          - amlogic,meson-s4-pwm
+      - items:
+          - enum:
+              - amlogic,meson8b-pwm-v2
+              - amlogic,meson-gxbb-pwm-v2
+              - amlogic,meson-axg-pwm-v2
+              - amlogic,meson-g12-pwm-v2
+          - const: amlogic,meson8-pwm-v2
 
   reg:
     maxItems: 1
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 4
 
   clock-names:
-    oneOf:
-      - items:
-          - enum: [clkin0, clkin1]
-      - items:
-          - const: clkin0
-          - const: clkin1
+    minItems: 1
+    maxItems: 2
 
   "#pwm-cells":
     const: 3
@@ -57,6 +63,79 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-pwm
+              - amlogic,meson8b-pwm
+              - amlogic,meson-gxbb-pwm
+              - amlogic,meson-gxbb-ao-pwm
+              - amlogic,meson-axg-ee-pwm
+              - amlogic,meson-axg-ao-pwm
+              - amlogic,meson-g12a-ee-pwm
+              - amlogic,meson-g12a-ao-pwm-ab
+              - amlogic,meson-g12a-ao-pwm-cd
+    then:
+      # Obsolete historic bindings tied to the driver implementation
+      # The clocks provided here are meant to be matched with the input
+      # known (hard-coded) in the driver and used to select pwm clock
+      # source. Currently, the linux driver ignores this.
+      # This is kept to maintain ABI backward compatibility.
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          oneOf:
+            - items:
+                - enum: [clkin0, clkin1]
+            - items:
+                - const: clkin0
+                - const: clkin1
+
+  # Newer binding where clock describe the actual clock inputs of the pwm
+  # block. These are necessary but some inputs may be grounded.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-pwm-v2
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: input clock 0 of the pwm block
+            - description: input clock 1 of the pwm block
+            - description: input clock 2 of the pwm block
+            - description: input clock 3 of the pwm block
+        clock-names: false
+      required:
+        - clocks
+
+  # Newer IP block take a single input per channel, instead of 4 inputs
+  # for both channels
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-s4-pwm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: input clock of PWM channel A
+            - description: input clock of PWM channel B
+        clock-names: false
+      required:
+        - clocks
+
 additionalProperties: false
 
 examples:
@@ -68,3 +147,17 @@ examples:
       clock-names = "clkin0", "clkin1";
       #pwm-cells = <3>;
     };
+  - |
+    pwm@2000 {
+      compatible = "amlogic,meson8-pwm-v2";
+      reg = <0x1000 0x10>;
+      clocks = <&xtal>, <0>, <&fdiv4>, <&fdiv5>;
+      #pwm-cells = <3>;
+    };
+  - |
+    pwm@1000 {
+      compatible = "amlogic,meson-s4-pwm";
+      reg = <0x1000 0x10>;
+      clocks = <&pwm_src_a>, <&pwm_src_b>;
+      #pwm-cells = <3>;
+    };
diff --git a/Bindings/pwm/pxa-pwm.txt b/Bindings/pwm/pxa-pwm.txt
deleted file mode 100644
index 5ae9f1e3c3..0000000000
--- a/Bindings/pwm/pxa-pwm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Marvell PWM controller
-
-Required properties:
-- compatible: should be one or more of:
-  - "marvell,pxa250-pwm"
-  - "marvell,pxa270-pwm"
-  - "marvell,pxa168-pwm"
-  - "marvell,pxa910-pwm"
-- reg: Physical base address and length of the registers used by the PWM channel
-  Note that one device instance must be created for each PWM that is used, so the
-  length covers only the register window for one PWM output, not that of the
-  entire PWM controller.  Currently length is 0x10 for all supported devices.
-- #pwm-cells: Should be 1.  This cell is used to specify the period in
-  nanoseconds.
-
-Example PWM device node:
-
-pwm0: pwm@40b00000 {
-	compatible = "marvell,pxa250-pwm";
-	reg = <0x40b00000 0x10>;
-	#pwm-cells = <1>;
-};
-
-Example PWM client node:
-
-backlight {
-	compatible = "pwm-backlight";
-	pwms = <&pwm0 5000000>;
-	...
-}
diff --git a/Bindings/regulator/gpio-regulator.yaml b/Bindings/regulator/gpio-regulator.yaml
index f4c1f36e52..a34e857546 100644
--- a/Bindings/regulator/gpio-regulator.yaml
+++ b/Bindings/regulator/gpio-regulator.yaml
@@ -47,6 +47,7 @@ properties:
         1: HIGH
       Default is LOW if nothing else is specified.
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
     maxItems: 8
     items:
       enum: [0, 1]
@@ -57,7 +58,8 @@ properties:
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
-    maxItems: 8
+    minItems: 2
+    maxItems: 256
     items:
       items:
         - description: Voltage in microvolts
diff --git a/Bindings/regulator/infineon,ir38060.yaml b/Bindings/regulator/infineon,ir38060.yaml
new file mode 100644
index 0000000000..e6ffbc2a22
--- /dev/null
+++ b/Bindings/regulator/infineon,ir38060.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon Buck Regulators with PMBUS interfaces
+
+maintainers:
+  - Not Me.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - infineon,ir38060
+      - infineon,ir38064
+      - infineon,ir38164
+      - infineon,ir38263
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@34 {
+        compatible = "infineon,ir38060";
+        reg = <0x34>;
+
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+      };
+    };
diff --git a/Bindings/regulator/mcp16502-regulator.txt b/Bindings/regulator/mcp16502-regulator.txt
deleted file mode 100644
index 451cc4e86b..0000000000
--- a/Bindings/regulator/mcp16502-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-MCP16502 PMIC
-
-Required properties:
-- compatible: "microchip,mcp16502"
-- reg: I2C slave address
-- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
-	     property is optional;
-- regulators: A node that houses a sub-node for each regulator within
-              the device. Each sub-node is identified using the node's
-              name. The content of each sub-node is defined by the
-              standard binding for regulators; see regulator.txt.
-
-Regulators of MCP16502 PMIC:
-1) VDD_IO	- Buck (1.2 - 3.7 V)
-2) VDD_DDR	- Buck (0.6 - 1.85 V)
-3) VDD_CORE	- Buck (0.6 - 1.85 V)
-4) VDD_OTHER	- BUCK (0.6 - 1.85 V)
-5) LDO1		- LDO  (1.2 - 3.7 V)
-6) LDO2		- LDO  (1.2 - 3.7 V)
-
-Regulator modes:
-2 - FPWM: higher precision, higher consumption
-4 - AutoPFM: lower precision, lower consumption
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-mcp16502@5b {
-	compatible = "microchip,mcp16502";
-	reg = <0x5b>;
-	status = "okay";
-	lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
-
-	regulators {
-		VDD_IO {
-			regulator-name = "VDD_IO";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_DDR {
-			regulator-name = "VDD_DDR";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_CORE {
-			regulator-name = "VDD_CORE";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_OTHER {
-			regulator-name = "VDD_OTHER";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-	};
-};
diff --git a/Bindings/regulator/microchip,mcp16502.yaml b/Bindings/regulator/microchip,mcp16502.yaml
new file mode 100644
index 0000000000..1aca364678
--- /dev/null
+++ b/Bindings/regulator/microchip,mcp16502.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCP16502 - High-Performance PMIC
+
+maintainers:
+  - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+  The MCP16502 is an optimally integrated PMIC compatible
+  with Microchip's eMPUs(Embedded Microprocessor Units),
+  requiring Dynamic Voltage Scaling (DVS) with the use
+  of High-Performance mode (HPM).
+
+properties:
+  compatible:
+    const: microchip,mcp16502
+
+  lpm-gpios:
+    maxItems: 1
+    description: GPIO for LPM pin.
+      Note that this GPIO must remain high during
+      suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: List of regulators and its properties.
+
+    patternProperties:
+      "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-initial-mode:
+            enum: [2, 4]
+            default: 2
+            description: Initial operating mode
+
+          regulator-allowed-modes:
+            items:
+              enum: [2, 4]
+            description: Supported modes
+              2 - FPWM higher precision, higher consumption
+              4 - AutoPFM lower precision, lower consumption
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@5b {
+            compatible = "microchip,mcp16502";
+            reg = <0x5b>;
+
+            regulators {
+                VDD_IO {
+                    regulator-name = "VDD_IO";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_DDR {
+                    regulator-name = "VDD_DDR";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_CORE {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <1150000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_OTHER {
+                    regulator-name = "VDD_OTHER";
+                    regulator-min-microvolt = <1050000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3700000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/Bindings/regulator/qcom,usb-vbus-regulator.yaml
index 534f87e987..33ae1f7868 100644
--- a/Bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -19,8 +19,15 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-vbus-reg
+    oneOf:
+      - enum:
+          - qcom,pm8150b-vbus-reg
+      - items:
+          - enum:
+              - qcom,pm4125-vbus-reg
+              - qcom,pm6150-vbus-reg
+              - qcom,pmi632-vbus-reg
+          - const: qcom,pm8150b-vbus-reg
 
   reg:
     maxItems: 1
diff --git a/Bindings/regulator/ti,tps65132.yaml b/Bindings/regulator/ti,tps65132.yaml
new file mode 100644
index 0000000000..6a6d1a3d6f
--- /dev/null
+++ b/Bindings/regulator/ti,tps65132.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65132 Dual Output Power Regulators
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+description: |
+  The TPS65132 is designed to supply positive/negative driven applications.
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps65132
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65132
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+      active-discharge-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to actively discharge the delay mechanism.
+
+      ti,active-discharge-time-us:
+        description: Regulator active discharge time in microseconds.
+
+    dependencies:
+      active-discharge-gpios: [ 'ti,active-discharge-time-us' ]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "ti,tps65132";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                regulator-active-discharge = <0>;
+                enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
+            };
+        };
+    };
diff --git a/Bindings/regulator/tps65132-regulator.txt b/Bindings/regulator/tps65132-regulator.txt
deleted file mode 100644
index 3a3505520c..0000000000
--- a/Bindings/regulator/tps65132-regulator.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-TPS65132 regulators
-
-Required properties:
-- compatible: "ti,tps65132"
-- reg: I2C slave address
-
-Optional Subnode:
-Device supports two regulators OUTP and OUTN. A sub node within the
-   device node describe the properties of these regulators. The sub-node
-   names must be as follows:
-	-For regulator outp, the sub node name should be "outp".
-	-For regulator outn, the sub node name should be "outn".
-
--enable-gpios:(active high, output) Regulators are controlled by the input pins.
-   If it is connected to GPIO through host system then provide the
-   gpio number as per gpio.txt.
--active-discharge-gpios: (active high, output) Some configurations use delay mechanisms
-  on the enable pin, to keep the regulator enabled for some time after
-  the enable signal goes low. This GPIO is used to actively discharge
-  the delay mechanism. Requires specification of ti,active-discharge-time-us
--ti,active-discharge-time-us: how long the active discharge gpio should be
-  asserted for during active discharge, in microseconds.
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-	tps65132@3e {
-		compatible = "ti,tps65132";
-		reg = <0x3e>;
-
-		outp {
-			regulator-name = "outp";
-			regulator-boot-on;
-			regulator-always-on;
-			enable-gpios = <&gpio 23 0>;
-		};
-
-		outn {
-			regulator-name = "outn";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-active-discharge = <0>;
-			enable-gpios = <&gpio 40 0>;
-		};
-	};
diff --git a/Bindings/remoteproc/mtk,scp.yaml b/Bindings/remoteproc/mtk,scp.yaml
index 09102dda49..507f98f73d 100644
--- a/Bindings/remoteproc/mtk,scp.yaml
+++ b/Bindings/remoteproc/mtk,scp.yaml
@@ -47,7 +47,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       If present, name (or relative path) of the file within the
       firmware search path containing the firmware image used when
@@ -115,7 +115,7 @@ patternProperties:
         maxItems: 1
 
       firmware-name:
-        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
         description:
           If present, name (or relative path) of the file within the
           firmware search path containing the firmware image used when
diff --git a/Bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Bindings/remoteproc/qcom,glink-rpm-edge.yaml
index 884158bccd..3766d4513b 100644
--- a/Bindings/remoteproc/qcom,glink-rpm-edge.yaml
+++ b/Bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -18,7 +18,6 @@ properties:
     const: qcom,glink-rpm
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description:
       Name of the edge, used for debugging and identification purposes. The
       node name will be used if this is not present.
diff --git a/Bindings/remoteproc/qcom,qcs404-pas.yaml b/Bindings/remoteproc/qcom,qcs404-pas.yaml
index eb868a7ff4..ad45fd00ae 100644
--- a/Bindings/remoteproc/qcom,qcs404-pas.yaml
+++ b/Bindings/remoteproc/qcom,qcs404-pas.yaml
@@ -46,7 +46,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sc7180-pas.yaml b/Bindings/remoteproc/qcom,sc7180-pas.yaml
index c054b84fdc..66b455d0a8 100644
--- a/Bindings/remoteproc/qcom,sc7180-pas.yaml
+++ b/Bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -45,7 +45,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index b6bd334385..9381c7022f 100644
--- a/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -80,7 +80,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       The name of the firmware which should be loaded for this remote
       processor.
diff --git a/Bindings/remoteproc/qcom,sc8180x-pas.yaml b/Bindings/remoteproc/qcom,sc8180x-pas.yaml
index 4744a37b2b..45ee9fbe09 100644
--- a/Bindings/remoteproc/qcom,sc8180x-pas.yaml
+++ b/Bindings/remoteproc/qcom,sc8180x-pas.yaml
@@ -42,7 +42,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm6115-pas.yaml b/Bindings/remoteproc/qcom,sm6115-pas.yaml
index 0282872359..758adb06c8 100644
--- a/Bindings/remoteproc/qcom,sm6115-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm6115-pas.yaml
@@ -47,7 +47,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm6350-pas.yaml b/Bindings/remoteproc/qcom,sm6350-pas.yaml
index f7e40fb166..c1a3cc308b 100644
--- a/Bindings/remoteproc/qcom,sm6350-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm6350-pas.yaml
@@ -42,7 +42,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm6375-pas.yaml b/Bindings/remoteproc/qcom,sm6375-pas.yaml
index 3e4a03eb45..7286b2baa1 100644
--- a/Bindings/remoteproc/qcom,sm6375-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm6375-pas.yaml
@@ -36,7 +36,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
   smd-edge: false
diff --git a/Bindings/remoteproc/qcom,sm8150-pas.yaml b/Bindings/remoteproc/qcom,sm8150-pas.yaml
index 238c6e5e67..d67386c50f 100644
--- a/Bindings/remoteproc/qcom,sm8150-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm8150-pas.yaml
@@ -46,7 +46,7 @@ properties:
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm8350-pas.yaml b/Bindings/remoteproc/qcom,sm8350-pas.yaml
index 53cea8e53a..4b9fb74fb9 100644
--- a/Bindings/remoteproc/qcom,sm8350-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -47,7 +47,7 @@ properties:
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm8550-pas.yaml b/Bindings/remoteproc/qcom,sm8550-pas.yaml
index 58120829fb..73fda7565c 100644
--- a/Bindings/remoteproc/qcom,sm8550-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -19,6 +19,11 @@ properties:
       - qcom,sm8550-adsp-pas
       - qcom,sm8550-cdsp-pas
       - qcom,sm8550-mpss-pas
+      - qcom,sm8650-adsp-pas
+      - qcom,sm8650-cdsp-pas
+      - qcom,sm8650-mpss-pas
+      - qcom,x1e80100-adsp-pas
+      - qcom,x1e80100-cdsp-pas
 
   reg:
     maxItems: 1
@@ -49,6 +54,8 @@ properties:
       - description: Memory region for main Firmware authentication
       - description: Memory region for Devicetree Firmware authentication
       - description: DSM Memory region
+      - description: DSM Memory region 2
+      - description: Memory region for Qlink Logging
 
 required:
   - compatible
@@ -63,6 +70,9 @@ allOf:
           enum:
             - qcom,sm8550-adsp-pas
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-adsp-pas
+            - qcom,x1e80100-adsp-pas
+            - qcom,x1e80100-cdsp-pas
     then:
       properties:
         interrupts:
@@ -71,7 +81,26 @@ allOf:
           maxItems: 5
         memory-region:
           maxItems: 2
-    else:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-mpss-pas
+    then:
       properties:
         interrupts:
           minItems: 6
@@ -79,12 +108,29 @@ allOf:
           minItems: 6
         memory-region:
           minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-mpss-pas
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          minItems: 5
+          maxItems: 5
 
   - if:
       properties:
         compatible:
           enum:
             - qcom,sm8550-adsp-pas
+            - qcom,sm8650-adsp-pas
+            - qcom,x1e80100-adsp-pas
     then:
       properties:
         power-domains:
@@ -101,6 +147,7 @@ allOf:
         compatible:
           enum:
             - qcom,sm8550-mpss-pas
+            - qcom,sm8650-mpss-pas
     then:
       properties:
         power-domains:
@@ -116,6 +163,8 @@ allOf:
         compatible:
           enum:
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-cdsp-pas
+            - qcom,x1e80100-cdsp-pas
     then:
       properties:
         power-domains:
diff --git a/Bindings/remoteproc/qcom,wcnss-pil.yaml b/Bindings/remoteproc/qcom,wcnss-pil.yaml
index 45eb42bd3c..8e033b22d2 100644
--- a/Bindings/remoteproc/qcom,wcnss-pil.yaml
+++ b/Bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -51,7 +51,7 @@ properties:
       - const: stop-ack
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Relative firmware image path for the WCNSS core. Defaults to
       "wcnss.mdt".
diff --git a/Bindings/remoteproc/ti,davinci-rproc.txt b/Bindings/remoteproc/ti,davinci-rproc.txt
index 25f8658e21..48a49c516b 100644
--- a/Bindings/remoteproc/ti,davinci-rproc.txt
+++ b/Bindings/remoteproc/ti,davinci-rproc.txt
@@ -1,9 +1,6 @@
 TI Davinci DSP devices
 =======================
 
-Binding status: Unstable - Subject to changes for DT representation of clocks
-			   and resets
-
 The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
 is used to offload some of the processor-intensive tasks or algorithms, for
 achieving various system level goals.
diff --git a/Bindings/reset/mobileye,eyeq5-reset.yaml b/Bindings/reset/mobileye,eyeq5-reset.yaml
new file mode 100644
index 0000000000..062b451834
--- /dev/null
+++ b/Bindings/reset/mobileye,eyeq5-reset.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 reset controller
+
+description:
+  The EyeQ5 reset driver handles three reset domains. Its registers live in a
+  shared region called OLB.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+properties:
+  compatible:
+    const: mobileye,eyeq5-reset
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: d0
+      - const: d1
+      - const: d2
+
+  "#reset-cells":
+    const: 2
+    description:
+      The first cell is the domain (0 to 2 inclusive) and the second one is the
+      reset index inside that domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+
+additionalProperties: false
diff --git a/Bindings/reset/renesas,rst.yaml b/Bindings/reset/renesas,rst.yaml
index e7e4872477..58b4a45d33 100644
--- a/Bindings/reset/renesas,rst.yaml
+++ b/Bindings/reset/renesas,rst.yaml
@@ -50,6 +50,7 @@ properties:
       - renesas,r8a779a0-rst      # R-Car V3U
       - renesas,r8a779f0-rst      # R-Car S4-8
       - renesas,r8a779g0-rst      # R-Car V4H
+      - renesas,r8a779h0-rst      # R-Car V4M
 
   reg:
     maxItems: 1
diff --git a/Bindings/reset/sophgo,sg2042-reset.yaml b/Bindings/reset/sophgo,sg2042-reset.yaml
new file mode 100644
index 0000000000..76e1931f09
--- /dev/null
+++ b/Bindings/reset/sophgo,sg2042-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 SoC Reset Controller
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstgen: reset-controller@c00 {
+        compatible = "sophgo,sg2042-reset";
+        reg = <0xc00 0xc>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/riscv/cpus.yaml b/Bindings/riscv/cpus.yaml
index 9d8670c00e..d87dd50f1a 100644
--- a/Bindings/riscv/cpus.yaml
+++ b/Bindings/riscv/cpus.yaml
@@ -75,6 +75,10 @@ properties:
       - riscv,sv57
       - riscv,none
 
+  reg:
+    description:
+      The hart ID of this CPU node.
+
   riscv,cbom-block-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -106,7 +110,11 @@ properties:
         const: 1
 
       compatible:
-        const: riscv,cpu-intc
+        oneOf:
+          - items:
+              - const: andestech,cpu-intc
+              - const: riscv,cpu-intc
+          - const: riscv,cpu-intc
 
       interrupt-controller: true
 
diff --git a/Bindings/riscv/extensions.yaml b/Bindings/riscv/extensions.yaml
index 63d81dc895..468c646247 100644
--- a/Bindings/riscv/extensions.yaml
+++ b/Bindings/riscv/extensions.yaml
@@ -477,5 +477,12 @@ properties:
             latency, as ratified in commit 56ed795 ("Update
             riscv-crypto-spec-vector.adoc") of riscv-crypto.
 
+        - const: xandespmu
+          description:
+            The Andes Technology performance monitor extension for counter overflow
+            and privilege mode filtering. For more details, see Counter Related
+            Registers in the AX45MP datasheet.
+            https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
+
 additionalProperties: true
 ...
diff --git a/Bindings/rng/atmel,at91-trng.yaml b/Bindings/rng/atmel,at91-trng.yaml
index 3ce45456d8..b38f825234 100644
--- a/Bindings/rng/atmel,at91-trng.yaml
+++ b/Bindings/rng/atmel,at91-trng.yaml
@@ -21,6 +21,10 @@ properties:
           - enum:
               - microchip,sama7g5-trng
           - const: atmel,at91sam9g45-trng
+      - items:
+          - enum:
+              - microchip,sam9x7-trng
+          - const: microchip,sam9x60-trng
 
   clocks:
     maxItems: 1
diff --git a/Bindings/rtc/abracon,abx80x.txt b/Bindings/rtc/abracon,abx80x.txt
deleted file mode 100644
index 2405e35a1b..0000000000
--- a/Bindings/rtc/abracon,abx80x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
-        "abracon,abx80x"
-        "abracon,ab0801"
-        "abracon,ab0803"
-        "abracon,ab0804"
-        "abracon,ab0805"
-        "abracon,ab1801"
-        "abracon,ab1803"
-        "abracon,ab1804"
-        "abracon,ab1805"
-        "microcrystal,rv1805"
-	Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
-                          resistor, the other values are in kOhm.
diff --git a/Bindings/rtc/abracon,abx80x.yaml b/Bindings/rtc/abracon,abx80x.yaml
new file mode 100644
index 0000000000..355b059841
--- /dev/null
+++ b/Bindings/rtc/abracon,abx80x.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers:
+  - linux-rtc@vger.kernel.org
+
+properties:
+  compatible:
+    description:
+      The wildcard 'abracon,abx80x' may be used to support a mix
+      of different abracon rtc`s. In this case the driver
+      must perform auto-detection from ID register.
+    enum:
+      - abracon,abx80x
+      - abracon,ab0801
+      - abracon,ab0803
+      - abracon,ab0804
+      - abracon,ab0805
+      - abracon,ab1801
+      - abracon,ab1803
+      - abracon,ab1804
+      - abracon,ab1805
+      - microcrystal,rv1805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  abracon,tc-diode:
+    description:
+      Trickle-charge diode type.
+      Required to enable charging backup battery.
+
+      Supported are 'standard' diodes with a 0.6V drop
+      and 'schottky' diodes with a 0.3V drop.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - standard
+      - schottky
+
+  abracon,tc-resistor:
+    description:
+      Trickle-charge resistor value in kOhm.
+      Required to enable charging backup battery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 3, 6, 11]
+
+dependentRequired:
+  abracon,tc-diode: ["abracon,tc-resistor"]
+  abracon,tc-resistor: ["abracon,tc-diode"]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - abracon,abx80x
+                - abracon,ab0804
+                - abracon,ab1804
+                - abracon,ab0805
+                - abracon,ab1805
+    then:
+      properties:
+        abracon,tc-diode: false
+        abracon,tc-resistor: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@69 {
+            compatible = "abracon,abx80x";
+            reg = <0x69>;
+            abracon,tc-diode = "schottky";
+            abracon,tc-resistor = <3>;
+            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Bindings/rtc/atmel,at91sam9260-rtt.yaml b/Bindings/rtc/atmel,at91sam9260-rtt.yaml
index b80b85c394..a7f6c1d1a0 100644
--- a/Bindings/rtc/atmel,at91sam9260-rtt.yaml
+++ b/Bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -19,7 +19,9 @@ properties:
       - items:
           - const: atmel,at91sam9260-rtt
       - items:
-          - const: microchip,sam9x60-rtt
+          - enum:
+              - microchip,sam9x60-rtt
+              - microchip,sam9x7-rtt
           - const: atmel,at91sam9260-rtt
       - items:
           - const: microchip,sama7g5-rtt
diff --git a/Bindings/rtc/mediatek,mt2712-rtc.yaml b/Bindings/rtc/mediatek,mt2712-rtc.yaml
new file mode 100644
index 0000000000..75624ddf6d
--- /dev/null
+++ b/Bindings/rtc/mediatek,mt2712-rtc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2712 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Ran Bi <ran.bi@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt2712-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10011000 {
+        compatible = "mediatek,mt2712-rtc";
+        reg = <0x10011000 0x1000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Bindings/rtc/mediatek,mt7622-rtc.yaml b/Bindings/rtc/mediatek,mt7622-rtc.yaml
new file mode 100644
index 0000000000..e74dfc161c
--- /dev/null
+++ b/Bindings/rtc/mediatek,mt7622-rtc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7622 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7622-rtc
+      - const: mediatek,soc-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10212800 {
+        compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc";
+        reg = <0x10212800 0x200>;
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RTC>;
+        clock-names = "rtc";
+    };
diff --git a/Bindings/rtc/rtc-mt2712.txt b/Bindings/rtc/rtc-mt2712.txt
deleted file mode 100644
index c33d87e5e7..0000000000
--- a/Bindings/rtc/rtc-mt2712.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-
-Example:
-
-rtc: rtc@10011000 {
-	compatible = "mediatek,mt2712-rtc";
-	reg = <0 0x10011000 0 0x1000>;
-	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/Bindings/rtc/rtc-mt7622.txt b/Bindings/rtc/rtc-mt7622.txt
deleted file mode 100644
index 09fe8f5147..0000000000
--- a/Bindings/rtc/rtc-mt7622.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-- clocks	    : Specifies list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : Should contain "rtc" entries
-
-Example:
-
-rtc: rtc@10212800 {
-	compatible = "mediatek,mt7622-rtc",
-		     "mediatek,soc-rtc";
-	reg = <0 0x10212800 0 0x200>;
-	interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&topckgen CLK_TOP_RTC>;
-	clock-names = "rtc";
-};
diff --git a/Bindings/rtc/sa1100-rtc.yaml b/Bindings/rtc/sa1100-rtc.yaml
index a16c355dcd..fcf52d2cac 100644
--- a/Bindings/rtc/sa1100-rtc.yaml
+++ b/Bindings/rtc/sa1100-rtc.yaml
@@ -12,7 +12,7 @@ allOf:
 maintainers:
   - Alessandro Zummo <a.zummo@towertech.it>
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   compatible:
diff --git a/Bindings/rtc/xlnx,zynqmp-rtc.yaml b/Bindings/rtc/xlnx,zynqmp-rtc.yaml
index d1f5eb996d..01cc90fee8 100644
--- a/Bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -18,7 +18,13 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,zynqmp-rtc
+    oneOf:
+      - const: xlnx,zynqmp-rtc
+      - items:
+          - enum:
+              - xlnx,versal-rtc
+              - xlnx,versal-net-rtc
+          - const: xlnx,zynqmp-rtc
 
   reg:
     maxItems: 1
@@ -48,6 +54,9 @@ properties:
     default: 0x198233
     deprecated: true
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/serial/atmel,at91-usart.yaml b/Bindings/serial/atmel,at91-usart.yaml
index 65cb2e5c5e..eb2992a447 100644
--- a/Bindings/serial/atmel,at91-usart.yaml
+++ b/Bindings/serial/atmel,at91-usart.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 maintainers:
-  - Richard Genoud <richard.genoud@gmail.com>
+  - Richard Genoud <richard.genoud@bootlin.com>
 
 properties:
   compatible:
diff --git a/Bindings/serial/cdns,uart.yaml b/Bindings/serial/cdns,uart.yaml
index e35ad1109e..2129247d7c 100644
--- a/Bindings/serial/cdns,uart.yaml
+++ b/Bindings/serial/cdns,uart.yaml
@@ -55,6 +55,7 @@ required:
 
 allOf:
   - $ref: serial.yaml#
+  - $ref: rs485.yaml#
   - if:
       properties:
         compatible:
diff --git a/Bindings/serial/fsl-lpuart.yaml b/Bindings/serial/fsl-lpuart.yaml
index 3a5b59f5d3..3f9ace89de 100644
--- a/Bindings/serial/fsl-lpuart.yaml
+++ b/Bindings/serial/fsl-lpuart.yaml
@@ -30,6 +30,7 @@ properties:
       - items:
           - enum:
               - fsl,imx93-lpuart
+              - fsl,imx95-lpuart
           - const: fsl,imx8ulp-lpuart
           - const: fsl,imx7ulp-lpuart
       - items:
diff --git a/Bindings/serial/renesas,hscif.yaml b/Bindings/serial/renesas,hscif.yaml
index 2046e2dc0a..9480ed3091 100644
--- a/Bindings/serial/renesas,hscif.yaml
+++ b/Bindings/serial/renesas,hscif.yaml
@@ -59,6 +59,7 @@ properties:
               - renesas,hscif-r8a779a0     # R-Car V3U
               - renesas,hscif-r8a779f0     # R-Car S4-8
               - renesas,hscif-r8a779g0     # R-Car V4H
+              - renesas,hscif-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-hscif # R-Car Gen4
           - const: renesas,hscif           # generic HSCIF compatible UART
 
diff --git a/Bindings/serial/samsung_uart.yaml b/Bindings/serial/samsung_uart.yaml
index 133259ed3a..0f01310269 100644
--- a/Bindings/serial/samsung_uart.yaml
+++ b/Bindings/serial/samsung_uart.yaml
@@ -143,6 +143,8 @@ allOf:
     then:
       required:
         - samsung,uart-fifosize
+      properties:
+        reg-io-width: false
 
 unevaluatedProperties: false
 
diff --git a/Bindings/serial/serial.yaml b/Bindings/serial/serial.yaml
index 65804ca274..ffc9198ae2 100644
--- a/Bindings/serial/serial.yaml
+++ b/Bindings/serial/serial.yaml
@@ -88,7 +88,7 @@ properties:
       TX FIFO threshold configuration (in bytes).
 
 patternProperties:
-  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$":
+  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
     if:
       type: object
     then:
diff --git a/Bindings/serial/st,asc.yaml b/Bindings/serial/st,asc.yaml
new file mode 100644
index 0000000000..f2083388f3
--- /dev/null
+++ b/Bindings/serial/st,asc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SoCs Serial Port
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: st,asc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  st,hw-flow-ctrl:
+    description: When set, enable hardware flow control.
+    type: boolean
+
+  st,force-m1:
+    description: When set, force asc to be in Mode-1. This is recommended for
+      high bit rates above 19.2K.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stih407-clks.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    serial@9830000 {
+        compatible = "st,asc";
+        reg = <0x9830000 0x2c>;
+        interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+    };
+...
diff --git a/Bindings/serial/st,stm32-uart.yaml b/Bindings/serial/st,stm32-uart.yaml
index 1df8ffe95f..62f97da1b2 100644
--- a/Bindings/serial/st,stm32-uart.yaml
+++ b/Bindings/serial/st,stm32-uart.yaml
@@ -58,6 +58,9 @@ properties:
 
   wakeup-source: true
 
+  power-domains:
+    maxItems: 1
+
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
diff --git a/Bindings/serial/st-asc.txt b/Bindings/serial/st-asc.txt
deleted file mode 100644
index a1b9b6f349..0000000000
--- a/Bindings/serial/st-asc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-*st-asc(Serial Port)
-
-Required properties:
-- compatible : Should be "st,asc".
-- reg, reg-names, interrupts, interrupt-names	: Standard way to define device
-			resources with names. look in
-			Documentation/devicetree/bindings/resource-names.txt
-
-Optional properties:
-- st,hw-flow-ctrl	bool flag to enable hardware flow control.
-- st,force-m1		bool flat to force asc to be in Mode-1 recommended
-			for high bit rates (above 19.2K)
-Example:
-serial@fe440000{
-    compatible    = "st,asc";
-    reg         = <0xfe440000 0x2c>;
-    interrupts     =  <0 209 0>;
-};
diff --git a/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
index 397f75909b..ce1a6505eb 100644
--- a/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
+++ b/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -51,7 +51,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^clock-controller@[0-9a-z]+$":
+  "^clock-controller@[0-9a-f]+$":
     $ref: /schemas/clock/fsl,flexspi-clock.yaml#
 
 required:
diff --git a/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
index 8d088b5fe8..a6a511b00a 100644
--- a/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
+++ b/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -41,7 +41,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^interrupt-controller@[a-z0-9]+$":
+  "^interrupt-controller@[a-f0-9]+$":
     $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
 
 required:
diff --git a/Bindings/soc/imx/fsl,imx-anatop.yaml b/Bindings/soc/imx/fsl,imx-anatop.yaml
new file mode 100644
index 0000000000..c4ae4f2842
--- /dev/null
+++ b/Bindings/soc/imx/fsl,imx-anatop.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ANATOP register
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sl-anatop
+              - fsl,imx6sll-anatop
+              - fsl,imx6sx-anatop
+              - fsl,imx6ul-anatop
+              - fsl,imx7d-anatop
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Temperature sensor event
+      - description: Brown-out event on either of the support regulators
+      - description: Brown-out event on either the core, gpu or soc regulators
+
+  tempmon:
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/thermal/imx-thermal.yaml
+
+patternProperties:
+  "regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/anatop-regulator.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    anatop: anatop@20c8000 {
+        compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+                     "syscon", "simple-mfd";
+        reg = <0x020c8000 0x1000>;
+        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+        reg_3p0: regulator-3p0 {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vdd3p0";
+            regulator-min-microvolt = <2625000>;
+            regulator-max-microvolt = <3400000>;
+            anatop-reg-offset = <0x120>;
+            anatop-vol-bit-shift = <8>;
+            anatop-vol-bit-width = <5>;
+            anatop-min-bit-val = <0>;
+            anatop-min-voltage = <2625000>;
+            anatop-max-voltage = <3400000>;
+            anatop-enable-bit = <0>;
+        };
+
+        reg_arm: regulator-vddcore {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "cpu";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <0>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <24>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        reg_soc: regulator-vddsoc {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vddsoc";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <18>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <28>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        tempmon: tempmon {
+            compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+            interrupt-parent = <&gpc>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,tempmon = <&anatop>;
+            nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+            nvmem-cell-names = "calib", "temp_grade";
+            clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
index 1da1b758b4..8451cb4dd8 100644
--- a/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
+++ b/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
@@ -17,7 +17,23 @@ properties:
   compatible:
     oneOf:
       - items:
-          - const: fsl,imx8mq-iomuxc-gpr
+          - enum:
+              - fsl,imx6q-iomuxc-gpr
+              - fsl,imx8mq-iomuxc-gpr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - fsl,imx6sl-iomuxc-gpr
+              - fsl,imx6sll-iomuxc-gpr
+              - fsl,imx6ul-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx6sx-iomuxc-gpr
+              - fsl,imx7d-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
           - const: syscon
           - const: simple-mfd
       - items:
diff --git a/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
index 1be4ce2a45..bd1cdaa4f5 100644
--- a/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
+++ b/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -27,8 +27,8 @@ properties:
     const: 1
 
   power-domains:
-    minItems: 8
-    maxItems: 8
+    minItems: 10
+    maxItems: 10
 
   power-domain-names:
     items:
@@ -40,10 +40,12 @@ properties:
       - const: trng
       - const: hdmi-tx
       - const: hdmi-tx-phy
+      - const: hdcp
+      - const: hrv
 
   clocks:
-    minItems: 4
-    maxItems: 4
+    minItems: 5
+    maxItems: 5
 
   clock-names:
     items:
@@ -51,6 +53,7 @@ properties:
       - const: axi
       - const: ref_266m
       - const: ref_24m
+      - const: fdcc
 
   interconnects:
     maxItems: 3
@@ -82,12 +85,15 @@ examples:
         clocks = <&clk IMX8MP_CLK_HDMI_APB>,
                  <&clk IMX8MP_CLK_HDMI_ROOT>,
                  <&clk IMX8MP_CLK_HDMI_REF_266M>,
-                 <&clk IMX8MP_CLK_HDMI_24M>;
-        clock-names = "apb", "axi", "ref_266m", "ref_24m";
+                 <&clk IMX8MP_CLK_HDMI_24M>,
+                 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
         power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
                         <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
-                        <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>;
         power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
-                             "hdmi-tx", "hdmi-tx-phy";
+                             "hdmi-tx", "hdmi-tx-phy",
+                             "hdcp", "hrv";
         #power-domain-cells = <1>;
     };
diff --git a/Bindings/soc/qcom/qcom,pbs.yaml b/Bindings/soc/qcom/qcom,pbs.yaml
new file mode 100644
index 0000000000..b502ca7226
--- /dev/null
+++ b/Bindings/soc/qcom/qcom,pbs.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pbs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Programmable Boot Sequencer
+
+maintainers:
+  - Anjelique Melendez <quic_amelende@quicinc.com>
+
+description: |
+  The Qualcomm Technologies, Inc. Programmable Boot Sequencer (PBS)
+  supports triggering power up and power down sequences for clients
+  upon request.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pmi632-pbs
+      - const: qcom,pbs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+      reg = <0x0 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pbs@7400 {
+        compatible = "qcom,pmi632-pbs", "qcom,pbs";
+        reg = <0x7400>;
+      };
+    };
diff --git a/Bindings/soc/qcom/qcom,pmic-glink.yaml b/Bindings/soc/qcom/qcom,pmic-glink.yaml
index 61df97ffe1..4310bae6c5 100644
--- a/Bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -23,6 +23,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,qcm6490-pmic-glink
               - qcom,sc8180x-pmic-glink
               - qcom,sc8280xp-pmic-glink
               - qcom,sm8350-pmic-glink
@@ -32,6 +33,7 @@ properties:
       - items:
           - enum:
               - qcom,sm8650-pmic-glink
+              - qcom,x1e80100-pmic-glink
           - const: qcom,sm8550-pmic-glink
           - const: qcom,pmic-glink
 
@@ -65,6 +67,7 @@ allOf:
               enum:
                 - qcom,sm8450-pmic-glink
                 - qcom,sm8550-pmic-glink
+                - qcom,x1e80100-pmic-glink
     then:
       properties:
         orientation-gpios: false
diff --git a/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
index 031800985b..9410404f87 100644
--- a/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
+++ b/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -35,6 +35,8 @@ properties:
     description: Phandle to an RPM MSG RAM slice containing the master stats
     minItems: 1
     maxItems: 5
+    items:
+      maxItems: 1
 
   qcom,master-names:
     $ref: /schemas/types.yaml#/definitions/string-array
diff --git a/Bindings/soc/qcom/qcom,spm.yaml b/Bindings/soc/qcom/qcom,saw2.yaml
similarity index 53%
rename from Bindings/soc/qcom/qcom,spm.yaml
rename to Bindings/soc/qcom/qcom,saw2.yaml
index 20c8cd38ff..ca4bce8172 100644
--- a/Bindings/soc/qcom/qcom,spm.yaml
+++ b/Bindings/soc/qcom/qcom,saw2.yaml
@@ -1,23 +1,33 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#
+$id: http://devicetree.org/schemas/soc/qcom/qcom,saw2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Subsystem Power Manager
+title: Qualcomm Subsystem Power Manager / SPM AVS Wrapper 2 (SAW2)
 
 maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  This binding describes the Qualcomm Subsystem Power Manager, used to control
-  the peripheral logic surrounding the application cores in Qualcomm platforms.
+  The Qualcomm Subsystem Power Manager is used to control the peripheral logic
+  surrounding the application cores in Qualcomm platforms.
+
+  The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+  Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+  power-controller that transitions a piece of hardware (like a processor or
+  subsystem) into and out of low power modes via a direct connection to
+  the PMIC. It can also be wired up to interact with other processors in the
+  system, notifying them when a low power state is entered or exited.
 
 properties:
   compatible:
     items:
       - enum:
+          - qcom,ipq4019-saw2-cpu
+          - qcom,ipq4019-saw2-l2
+          - qcom,ipq8064-saw2-cpu
           - qcom,sdm660-gold-saw2-v4.1-l2
           - qcom,sdm660-silver-saw2-v4.1-l2
           - qcom,msm8998-gold-saw2-v4.1-l2
@@ -26,16 +36,27 @@ properties:
           - qcom,msm8916-saw2-v3.0-cpu
           - qcom,msm8939-saw2-v3.0-cpu
           - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8226-saw2-v2.1-l2
+          - qcom,msm8960-saw2-cpu
           - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-l2
           - qcom,msm8976-gold-saw2-v2.3-l2
           - qcom,msm8976-silver-saw2-v2.3-l2
           - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8084-saw2-v2.1-l2
           - qcom,apq8064-saw2-v1.1-cpu
       - const: qcom,saw2
 
   reg:
-    description: Base address and size of the SPM register region
-    maxItems: 1
+    items:
+      - description: Base address and size of the SPM register region
+      - description: Base address and size of the alias register region
+    minItems: 1
+
+  regulator:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: Indicates that this SPM device acts as a regulator device
+      device for the core (CPU or Cache) the SPM is attached to.
 
 required:
   - compatible
@@ -82,4 +103,17 @@ examples:
         reg = <0x17912000 0x1000>;
     };
 
+  - |
+    /*
+     * Example 3: SAW2 with the bundled regulator definition.
+     */
+    power-manager@2089000 {
+        compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+        reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+
+        regulator {
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <1300000>;
+        };
+    };
 ...
diff --git a/Bindings/soc/renesas/renesas-soc.yaml b/Bindings/soc/renesas/renesas-soc.yaml
new file mode 100644
index 0000000000..5ddd31f30f
--- /dev/null
+++ b/Bindings/soc/renesas/renesas-soc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SoC compatibles naming convention
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    renesas,SoC-IP
+
+  For example::
+   renesas,r8a77965-csi2
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: "^renesas,.+-.+$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    minItems: 1
+    maxItems: 4
+    items:
+      anyOf:
+        # Preferred naming style for compatibles of SoC components
+        - pattern: "^renesas,(emev2|r(7s|8a|9a)[a-z0-9]+|rcar|rmobile|rz[a-z0-9]*|sh(7[a-z0-9]+)?|mobile)-[a-z0-9-]+$"
+        - pattern: "^renesas,(condor|falcon|gr-peach|gray-hawk|salvator|sk-rz|smar(c(2)?)?|spider|white-hawk)(.*)?$"
+
+        # Legacy compatibles
+        #
+        # New compatibles are not allowed.
+        - pattern: "^renesas,(can|cpg|dmac|du|(g)?ether(avb)?|gpio|hscif|(r)?i[i2]c|imr|intc|ipmmu|irqc|jpu|mmcif|msiof|mtu2|pci(e)?|pfc|pwm|[rq]spi|rcar_sound|sata|scif[ab]*|sdhi|thermal|tmu|tpu|usb(2|hs)?|vin|xhci)-[a-z0-9-]+$"
+        - pattern: "^renesas,(d|s)?bsc(3)?-(r8a73a4|r8a7740|sh73a0)$"
+        - pattern: "^renesas,em-(gio|sti|uart)$"
+        - pattern: "^renesas,fsi2-(r8a7740|sh73a0)$"
+        - pattern: "^renesas,hspi-r8a777[89]$"
+        - pattern: "^renesas,sysc-(r8a73a4|r8a7740|rmobile|sh73a0)$"
+        - enum:
+            - renesas,imr-lx4
+            - renesas,mtu2-r7s72100
+
+        # None SoC component compatibles
+        #
+        # Compatibles with the Renesas vendor prefix that do not relate to any SoC
+        # component are OK. New compatibles are allowed.
+        - enum:
+            - renesas,smp-sram
+
+        # Do not fail compatibles not matching the select pattern
+        #
+        # Some SoC components in addition to a Renesas compatible list
+        # compatibles not related to Renesas. The select pattern for this
+        # schema hits all compatibles that have at lest one Renesas compatible
+        # and try to validate all values in that compatible array, allow all
+        # that don't match the schema select pattern. For example,
+        #
+        #   compatible = "renesas,r9a07g044-mali", "arm,mali-bifrost";
+        - pattern: "^(?!renesas,.+-.+).+$"
+
+additionalProperties: true
diff --git a/Bindings/soc/renesas/renesas.yaml b/Bindings/soc/renesas/renesas.yaml
index 16ca3ff7b1..c1ce4da2dc 100644
--- a/Bindings/soc/renesas/renesas.yaml
+++ b/Bindings/soc/renesas/renesas.yaml
@@ -348,12 +348,25 @@ properties:
               - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
           - const: renesas,r8a779g0
 
+      - description: R-Car V4H (R8A779G2)
+        items:
+          - enum:
+              - renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001)
+          - const: renesas,r8a779g2
+          - const: renesas,r8a779g0
+
       - items:
           - enum:
               - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
           - const: renesas,white-hawk-cpu
           - const: renesas,r8a779g0
 
+      - description: R-Car V4M (R8A779H0)
+        items:
+          - enum:
+              - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S)
+          - const: renesas,r8a779h0
+
       - description: R-Car H3e (R8A779M0)
         items:
           - enum:
@@ -475,12 +488,6 @@ properties:
               - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
           - const: renesas,r9a07g054
 
-      - description: RZ/V2M (R9A09G011)
-        items:
-          - enum:
-              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
-          - const: renesas,r9a09g011
-
       - description: RZ/G3S (R9A08G045)
         items:
           - enum:
@@ -500,6 +507,12 @@ properties:
           - const: renesas,r9a08g045s33 # PCIe support
           - const: renesas,r9a08g045
 
+      - description: RZ/V2M (R9A09G011)
+        items:
+          - enum:
+              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
+          - const: renesas,r9a09g011
+
 additionalProperties: true
 
 ...
diff --git a/Bindings/soc/rockchip/grf.yaml b/Bindings/soc/rockchip/grf.yaml
index 9793ea6f0f..79798c7474 100644
--- a/Bindings/soc/rockchip/grf.yaml
+++ b/Bindings/soc/rockchip/grf.yaml
@@ -22,12 +22,15 @@ properties:
               - rockchip,rk3568-usb2phy-grf
               - rockchip,rk3588-bigcore0-grf
               - rockchip,rk3588-bigcore1-grf
+              - rockchip,rk3588-hdptxphy-grf
               - rockchip,rk3588-ioc
               - rockchip,rk3588-php-grf
               - rockchip,rk3588-pipe-phy-grf
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rk3588-usb-grf
+              - rockchip,rk3588-usbdpphy-grf
               - rockchip,rk3588-vo-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
@@ -66,6 +69,9 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -165,6 +171,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
@@ -248,6 +255,22 @@ allOf:
 
           unevaluatedProperties: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-vo-grf
+
+    then:
+      required:
+        - clocks
+
+    else:
+      properties:
+        clocks: false
+
+
 examples:
   - |
     #include <dt-bindings/clock/rk3399-cru.h>
diff --git a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
index 1794e3799f..c0c6ce8fc7 100644
--- a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
@@ -72,6 +72,8 @@ allOf:
         compatible:
           contains:
             enum:
+              - google,gs101-peric0-sysreg
+              - google,gs101-peric1-sysreg
               - samsung,exynos850-cmgp-sysreg
               - samsung,exynos850-peri-sysreg
               - samsung,exynos850-sysreg
diff --git a/Bindings/soc/xilinx/xilinx.yaml b/Bindings/soc/xilinx/xilinx.yaml
index d4c0fe1fe4..131aba5ed9 100644
--- a/Bindings/soc/xilinx/xilinx.yaml
+++ b/Bindings/soc/xilinx/xilinx.yaml
@@ -117,20 +117,70 @@ properties:
           - const: xlnx,zynqmp
 
       - description: Xilinx Kria SOMs
+        minItems: 3
         items:
-          - const: xlnx,zynqmp-sm-k26-rev1
-          - const: xlnx,zynqmp-sm-k26-revB
-          - const: xlnx,zynqmp-sm-k26-revA
-          - const: xlnx,zynqmp-sm-k26
-          - const: xlnx,zynqmp
+          enum:
+            - xlnx,zynqmp-sm-k26-rev2
+            - xlnx,zynqmp-sm-k26-rev1
+            - xlnx,zynqmp-sm-k26-revB
+            - xlnx,zynqmp-sm-k26-revA
+            - xlnx,zynqmp-sm-k26
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp
+          - contains:
+              const: xlnx,zynqmp-sm-k26
 
       - description: Xilinx Kria SOMs (starter)
+        minItems: 3
         items:
-          - const: xlnx,zynqmp-smk-k26-rev1
-          - const: xlnx,zynqmp-smk-k26-revB
-          - const: xlnx,zynqmp-smk-k26-revA
-          - const: xlnx,zynqmp-smk-k26
-          - const: xlnx,zynqmp
+          enum:
+            - xlnx,zynqmp-smk-k26-rev2
+            - xlnx,zynqmp-smk-k26-rev1
+            - xlnx,zynqmp-smk-k26-revB
+            - xlnx,zynqmp-smk-k26-revA
+            - xlnx,zynqmp-smk-k26
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp
+          - contains:
+              const: xlnx,zynqmp-smk-k26
+
+      - description: Xilinx Kria SOM KV260 revA/Y/Z
+        minItems: 3
+        items:
+          enum:
+            - xlnx,zynqmp-sk-kv260-revA
+            - xlnx,zynqmp-sk-kv260-revY
+            - xlnx,zynqmp-sk-kv260-revZ
+            - xlnx,zynqmp-sk-kv260
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp-sk-kv260-revA
+          - contains:
+              const: xlnx,zynqmp-sk-kv260
+          - contains:
+              const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOM KV260 rev2/1/B
+        minItems: 3
+        items:
+          enum:
+            - xlnx,zynqmp-sk-kv260-rev2
+            - xlnx,zynqmp-sk-kv260-rev1
+            - xlnx,zynqmp-sk-kv260-revB
+            - xlnx,zynqmp-sk-kv260
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp-sk-kv260-revB
+          - contains:
+              const: xlnx,zynqmp-sk-kv260
+          - contains:
+              const: xlnx,zynqmp
 
       - description: AMD MicroBlaze V (QEMU)
         items:
diff --git a/Bindings/sound/atmel,asoc-wm8904.yaml b/Bindings/sound/atmel,asoc-wm8904.yaml
new file mode 100644
index 0000000000..89a67f8e33
--- /dev/null
+++ b/Bindings/sound/atmel,asoc-wm8904.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel wm8904 audio codec complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The ASoC audio complex configuration for Atmel with WM8904 audio codec.
+
+properties:
+  compatible:
+    const: atmel,asoc-wm8904
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+        - Mic
+        # WM8904 CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - MICBIAS
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,audio-routing
+  - atmel,ssc-controller
+  - atmel,audio-codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,asoc-wm8904";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+        atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "HPOUTL",
+                "Headphone Jack", "HPOUTR",
+                "IN2L", "Line In Jack",
+                "IN2R", "Line In Jack",
+                "Mic", "MICBIAS",
+                "IN1L", "Mic";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8904>;
+    };
diff --git a/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml b/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml
new file mode 100644
index 0000000000..33717b728f
--- /dev/null
+++ b/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel at91sam9x5ek wm8731 audio complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec.
+
+properties:
+  compatible:
+    const: atmel,sam9x5-wm8731-audio
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+
+        # CODEC Pins
+        - LOUT
+        - ROUT
+        - LHPOUT
+        - RHPOUT
+        - LLINEIN
+        - RLINEIN
+        - MICIN
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,ssc-controller
+  - atmel,audio-codec
+  - atmel,audio-routing
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,sam9x5-wm8731-audio";
+
+        atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "RHPOUT",
+                "Headphone Jack", "LHPOUT",
+                "LLINEIN", "Line In Jack",
+                "RLINEIN", "Line In Jack";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8731>;
+    };
diff --git a/Bindings/sound/atmel,sama5d2-classd.yaml b/Bindings/sound/atmel,sama5d2-classd.yaml
index 43d04702ac..ae3162fcfe 100644
--- a/Bindings/sound/atmel,sama5d2-classd.yaml
+++ b/Bindings/sound/atmel,sama5d2-classd.yaml
@@ -18,7 +18,12 @@ description:
 
 properties:
   compatible:
-    const: atmel,sama5d2-classd
+    oneOf:
+      - items:
+          - const: atmel,sama5d2-classd
+      - items:
+          - const: microchip,sam9x7-classd
+          - const: atmel,sama5d2-classd
 
   reg:
     maxItems: 1
diff --git a/Bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Bindings/sound/atmel-sam9x5-wm8731-audio.txt
deleted file mode 100644
index 8facbce53d..0000000000
--- a/Bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Atmel at91sam9x5ek wm8731 audio complex
-
-Required properties:
-  - compatible: "atmel,sam9x5-wm8731-audio"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8731 audio codec
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source.
-
-Available audio endpoints for the audio-routing table:
-
-Board connectors:
- * Headphone Jack
- * Line In Jack
-
-wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
-
-Example:
-sound {
-	compatible = "atmel,sam9x5-wm8731-audio";
-
-	atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "RHPOUT",
-		"Headphone Jack", "LHPOUT",
-		"LLINEIN", "Line In Jack",
-		"RLINEIN", "Line In Jack";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8731>;
-};
diff --git a/Bindings/sound/atmel-wm8904.txt b/Bindings/sound/atmel-wm8904.txt
deleted file mode 100644
index 8bbe50c884..0000000000
--- a/Bindings/sound/atmel-wm8904.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Atmel ASoC driver with wm8904 audio codec complex
-
-Required properties:
-  - compatible: "atmel,asoc-wm8904"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source. Valid names for sources and
-    sinks are the WM8904's pins, and the jacks on the board:
-
-    WM8904 pins:
-
-    * IN1L
-    * IN1R
-    * IN2L
-    * IN2R
-    * IN3L
-    * IN3R
-    * HPOUTL
-    * HPOUTR
-    * LINEOUTL
-    * LINEOUTR
-    * MICBIAS
-
-    Board connectors:
-
-    * Headphone Jack
-    * Line In Jack
-    * Mic
-
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8904 audio codec
-
-Optional properties:
-  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
-
-Example:
-sound {
-	compatible = "atmel,asoc-wm8904";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-	atmel,model = "wm8904 @ AT91SAM9N12EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "HPOUTL",
-		"Headphone Jack", "HPOUTR",
-		"IN2L", "Line In Jack",
-		"IN2R", "Line In Jack",
-		"Mic", "MICBIAS",
-		"IN1L", "Mic";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8904>;
-};
diff --git a/Bindings/sound/audio-graph-port.yaml b/Bindings/sound/audio-graph-port.yaml
index b13c08de50..28b27e7e45 100644
--- a/Bindings/sound/audio-graph-port.yaml
+++ b/Bindings/sound/audio-graph-port.yaml
@@ -51,7 +51,7 @@ definitions:
           - $ref: /schemas/types.yaml#/definitions/phandle
       clocks:
         description: Indicates system clock
-        $ref: /schemas/types.yaml#/definitions/phandle
+        maxItems: 1
       system-clock-frequency:
         $ref: simple-card.yaml#/definitions/system-clock-frequency
       system-clock-direction-out:
diff --git a/Bindings/sound/cirrus,cs35l45.yaml b/Bindings/sound/cirrus,cs35l45.yaml
index 4c9acb8d4c..70f6c62aed 100644
--- a/Bindings/sound/cirrus,cs35l45.yaml
+++ b/Bindings/sound/cirrus,cs35l45.yaml
@@ -25,6 +25,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 1
 
diff --git a/Bindings/sound/cirrus,cs42l43.yaml b/Bindings/sound/cirrus,cs42l43.yaml
index 7f9d8c7a63..99a536601c 100644
--- a/Bindings/sound/cirrus,cs42l43.yaml
+++ b/Bindings/sound/cirrus,cs42l43.yaml
@@ -185,11 +185,12 @@ properties:
 
       gpio-ranges:
         items:
-          - description: A phandle to the CODEC pinctrl node
-            minimum: 0
-          - const: 0
-          - const: 0
-          - const: 3
+          - items:
+              - description: A phandle to the CODEC pinctrl node
+                minimum: 0
+              - const: 0
+              - const: 0
+              - const: 3
 
     patternProperties:
       "-state$":
diff --git a/Bindings/sound/cs4341.txt b/Bindings/sound/cs4341.txt
index 12b4aa8ef0..c1d5c8ad1a 100644
--- a/Bindings/sound/cs4341.txt
+++ b/Bindings/sound/cs4341.txt
@@ -9,7 +9,7 @@ Required properties:
           number for SPI.
 
 For required properties on I2C-bus, please consult
-Documentation/devicetree/bindings/i2c/i2c.txt
+dtschema schemas/i2c/i2c-controller.yaml
 For required properties on SPI-bus, please consult
 Documentation/devicetree/bindings/spi/spi-bus.txt
 
diff --git a/Bindings/sound/everest,es8326.yaml b/Bindings/sound/everest,es8326.yaml
index 07781408e7..8c82d47375 100644
--- a/Bindings/sound/everest,es8326.yaml
+++ b/Bindings/sound/everest,es8326.yaml
@@ -38,6 +38,7 @@ properties:
     default: 0x0f
 
   everest,mic1-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset plugged.
@@ -46,6 +47,7 @@ properties:
     default: 0x22
 
   everest,mic2-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset unplugged.
@@ -87,7 +89,7 @@ properties:
        0 means the chip detect jack type again after button released.
     minimum: 0
     maximum: 0x7f
-    default: 0x45
+    default: 0x00
 
 required:
   - compatible
@@ -107,10 +109,8 @@ examples:
         clocks = <&clks 10>;
         clock-names = "mclk";
         #sound-dai-cells = <0>;
-        everest,mic1-src = [22];
-        everest,mic2-src = [44];
         everest,jack-pol = [0e];
         everest,interrupt-src = [08];
-        everest,interrupt-clk = [45];
+        everest,interrupt-clk = [00];
       };
     };
diff --git a/Bindings/sound/fsl,asrc.txt b/Bindings/sound/fsl,asrc.txt
deleted file mode 100644
index 998b4c8a7f..0000000000
--- a/Bindings/sound/fsl,asrc.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Freescale Asynchronous Sample Rate Converter (ASRC) Controller
-
-The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
-signal associated with an input clock into a signal associated with a different
-output clock. The driver currently works as a Front End of DPCM with other Back
-Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
-three substreams within totally 10 channels.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-asrc",
-			  "fsl,imx53-asrc",
-			  "fsl,imx8qm-asrc",
-			  "fsl,imx8qxp-asrc",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Contains the following entries
-	"mem"		  Peripheral access clock to access registers.
-	"ipg"		  Peripheral clock to driver module.
-	"asrck_<0-f>"	  Clock sources for input and output clock.
-	"spba"		  The spba clock is required when ASRC is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
-
-   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
-
-   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
-			  by imx8qm/imx8qxp platform
-			  <0> - select the map for asrc0 in imx8qm/imx8qxp
-			  <1> - select the map for asrc1 in imx8qm/imx8qxp
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the little endian mode
-			  will be in use as default. Otherwise, the big endian
-			  mode will be in use for all the device registers.
-
-   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
-			  Ends, which can replace the fsl,asrc-width.
-			  The value is 2 (S16_LE), or 6 (S24_LE).
-
-Example:
-
-asrc: asrc@2034000 {
-	compatible = "fsl,imx53-asrc";
-	reg = <0x02034000 0x4000>;
-	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 107>, <&clks 0>, <&clks 0>;
-	clock-names = "mem", "ipg", "asrck0",
-		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-		"asrck_d", "asrck_e", "asrck_f";
-	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-	dma-names = "rxa", "rxb", "rxc",
-		"txa", "txb", "txc";
-	fsl,asrc-rate  = <48000>;
-	fsl,asrc-width = <16>;
-};
diff --git a/Bindings/sound/fsl,easrc.yaml b/Bindings/sound/fsl,easrc.yaml
index a680d7aff2..0782f3f994 100644
--- a/Bindings/sound/fsl,easrc.yaml
+++ b/Bindings/sound/fsl,easrc.yaml
@@ -51,8 +51,8 @@ properties:
       - const: ctx3_tx
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
-    const: imx/easrc/easrc-imx8mn.bin
+    items:
+      - const: imx/easrc/easrc-imx8mn.bin
     description: The coefficient table for the filters
 
   fsl,asrc-rate:
diff --git a/Bindings/sound/fsl,imx-asrc.yaml b/Bindings/sound/fsl,imx-asrc.yaml
new file mode 100644
index 0000000000..bfef2fcb75
--- /dev/null
+++ b/Bindings/sound/fsl,imx-asrc.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+description:
+  The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
+  a signal associated with an input clock into a signal associated with a
+  different output clock. The driver currently works as a Front End of DPCM
+  with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
+  three pairs to support three substreams within totally 10 channels.
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx35-asrc
+          - fsl,imx53-asrc
+          - fsl,imx8qm-asrc
+          - fsl,imx8qxp-asrc
+      - items:
+          - enum:
+              - fsl,imx6sx-asrc
+              - fsl,imx6ul-asrc
+          - const: fsl,imx53-asrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 6
+
+  dma-names:
+    items:
+      - const: rxa
+      - const: rxb
+      - const: rxc
+      - const: txa
+      - const: txb
+      - const: txc
+
+  clocks:
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: mem
+      - const: ipg
+      - const: asrck_0
+      - const: asrck_1
+      - const: asrck_2
+      - const: asrck_3
+      - const: asrck_4
+      - const: asrck_5
+      - const: asrck_6
+      - const: asrck_7
+      - const: asrck_8
+      - const: asrck_9
+      - const: asrck_a
+      - const: asrck_b
+      - const: asrck_c
+      - const: asrck_d
+      - const: asrck_e
+      - const: asrck_f
+      - const: spba
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample width used by DPCM Back Ends
+    enum: [16, 24]
+
+  fsl,asrc-clk-map:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines clock map used in driver
+      <0> - select the map for asrc0 in imx8qm/imx8qxp
+      <1> - select the map for asrc1 in imx8qm/imx8qxp
+    enum: [0, 1]
+
+  big-endian:
+    type: boolean
+    description:
+      If this property is absent, the little endian mode will be in use as
+      default. Otherwise, the big endian mode will be in use for all the
+      device registers.
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines a mutual sample format used by DPCM Back Ends, which can
+      replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
+    enum: [2, 6]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - fsl,asrc-rate
+  - fsl,asrc-width
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-asrc
+              - fsl,imx8qxp-asrc
+    then:
+      required:
+        - fsl,asrc-clk-map
+    else:
+      properties:
+        fsl,asrc-clk-map: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    asrc: asrc@2034000 {
+        compatible = "fsl,imx53-asrc";
+        reg = <0x02034000 0x4000>;
+        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_SPBA>;
+        clock-names = "mem", "ipg", "asrck_0",
+                "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+                "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+                "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+                "asrck_d", "asrck_e", "asrck_f", "spba";
+        dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+        dma-names = "rxa", "rxb", "rxc",
+                    "txa", "txb", "txc";
+        fsl,asrc-rate  = <48000>;
+        fsl,asrc-width = <16>;
+    };
diff --git a/Bindings/sound/fsl,micfil.yaml b/Bindings/sound/fsl,micfil.yaml
index b7e6058356..c1e9803fc1 100644
--- a/Bindings/sound/fsl,micfil.yaml
+++ b/Bindings/sound/fsl,micfil.yaml
@@ -15,10 +15,16 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mm-micfil
-      - fsl,imx8mp-micfil
-      - fsl,imx93-micfil
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx95-micfil
+          - const: fsl,imx93-micfil
+
+      - enum:
+          - fsl,imx8mm-micfil
+          - fsl,imx8mp-micfil
+          - fsl,imx93-micfil
 
   reg:
     maxItems: 1
diff --git a/Bindings/sound/fsl,sai.yaml b/Bindings/sound/fsl,sai.yaml
index 088c26b001..2456d958ad 100644
--- a/Bindings/sound/fsl,sai.yaml
+++ b/Bindings/sound/fsl,sai.yaml
@@ -39,6 +39,7 @@ properties:
               - fsl,imx8qm-sai
               - fsl,imx8ulp-sai
               - fsl,imx93-sai
+              - fsl,imx95-sai
               - fsl,vf610-sai
 
   reg:
@@ -75,12 +76,17 @@ properties:
           - const: pll11k
         minItems: 4
 
+  power-domains:
+    maxItems: 1
+
   dmas:
+    minItems: 1
     items:
       - description: DMA controller phandle and request line for RX
       - description: DMA controller phandle and request line for TX
 
   dma-names:
+    minItems: 1
     items:
       - const: rx
       - const: tx
diff --git a/Bindings/sound/infineon,peb2466.yaml b/Bindings/sound/infineon,peb2466.yaml
index 66993d378a..5e11ce2c13 100644
--- a/Bindings/sound/infineon,peb2466.yaml
+++ b/Bindings/sound/infineon,peb2466.yaml
@@ -51,7 +51,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Filters coefficients file to load. If this property is omitted, internal
       filters are disabled.
diff --git a/Bindings/sound/microchip,sama7g5-i2smcc.yaml b/Bindings/sound/microchip,sama7g5-i2smcc.yaml
index 651f61c7c2..fb630a1843 100644
--- a/Bindings/sound/microchip,sama7g5-i2smcc.yaml
+++ b/Bindings/sound/microchip,sama7g5-i2smcc.yaml
@@ -24,9 +24,14 @@ properties:
     const: 0
 
   compatible:
-    enum:
-      - microchip,sam9x60-i2smcc
-      - microchip,sama7g5-i2smcc
+    oneOf:
+      - enum:
+          - microchip,sam9x60-i2smcc
+          - microchip,sama7g5-i2smcc
+      - items:
+          - enum:
+              - microchip,sam9x7-i2smcc
+          - const: microchip,sam9x60-i2smcc
 
   reg:
     maxItems: 1
diff --git a/Bindings/sound/qcom,q6usb.yaml b/Bindings/sound/qcom,q6usb.yaml
new file mode 100644
index 0000000000..37161d2aa9
--- /dev/null
+++ b/Bindings/sound/qcom,q6usb.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ASoC DPCM USB backend DAI
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+  The USB port is a supported AFE path on the Q6 DSP.  This ASoC DPCM
+  backend DAI will communicate the required settings to initialize the
+  XHCI host controller properly for enabling the offloaded audio stream.
+  Parameters defined under this node will carry settings, which will be
+  passed along during the QMI stream enable request and configuration of
+  the XHCI host controller.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6usb
+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  qcom,usb-audio-intr-idx:
+    description:
+      Desired XHCI interrupter number to use.  Depending on the audio DSP
+      on the platform, it will operate on a specific XHCI interrupter.
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 8
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - qcom,usb-audio-intr-idx
+
+additionalProperties: false
+
+examples:
+  - |
+    dais {
+      compatible = "qcom,q6usb";
+      #sound-dai-cells = <1>;
+      iommus = <&apps_smmu 0x180f 0x0>;
+      qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+    };
diff --git a/Bindings/sound/qcom,sm8250.yaml b/Bindings/sound/qcom,sm8250.yaml
index 6f41974727..2ab6871e89 100644
--- a/Bindings/sound/qcom,sm8250.yaml
+++ b/Bindings/sound/qcom,sm8250.yaml
@@ -107,7 +107,7 @@ patternProperties:
         properties:
           sound-dai:
             minItems: 1
-            maxItems: 4
+            maxItems: 8
 
     required:
       - link-name
diff --git a/Bindings/sound/qcom,wcd938x.yaml b/Bindings/sound/qcom,wcd938x.yaml
index adbfa67f88..cf6c3787ad 100644
--- a/Bindings/sound/qcom,wcd938x.yaml
+++ b/Bindings/sound/qcom,wcd938x.yaml
@@ -15,6 +15,7 @@ description: |
 
 allOf:
   - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
 
 properties:
   compatible:
@@ -22,92 +23,12 @@ properties:
       - qcom,wcd9380-codec
       - qcom,wcd9385-codec
 
-  reset-gpios:
-    description: GPIO spec for reset line to use
-    maxItems: 1
-
   us-euro-gpios:
     description: GPIO spec for swapping gnd and mic segments
     maxItems: 1
 
-  vdd-buck-supply:
-    description: A reference to the 1.8V buck supply
-
-  vdd-rxtx-supply:
-    description: A reference to the 1.8V rx supply
-
-  vdd-io-supply:
-    description: A reference to the 1.8V I/O supply
-
-  vdd-mic-bias-supply:
-    description: A reference to the 3.8V mic bias supply
-
-  qcom,tx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire tx device phandle
-
-  qcom,rx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire rx device phandle
-
-  qcom,micbias1-microvolt:
-    description: micbias1 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias2-microvolt:
-    description: micbias2 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias3-microvolt:
-    description: micbias3 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias4-microvolt:
-    description: micbias4 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,hphl-jack-type-normally-closed:
-    description: Indicates that HPHL jack switch type is normally closed
-    type: boolean
-
-  qcom,ground-jack-type-normally-closed:
-    description: Indicates that Headset Ground switch type is normally closed
-    type: boolean
-
-  qcom,mbhc-headset-vthreshold-microvolt:
-    description: Voltage threshold value for headset detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-headphone-vthreshold-microvolt:
-    description: Voltage threshold value for headphone detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-buttons-vthreshold-microvolt:
-    description:
-      Array of 8 Voltage threshold values corresponding to headset
-      button0 - button7
-    minItems: 8
-    maxItems: 8
-
-  '#sound-dai-cells':
-    const: 1
-
 required:
   - compatible
-  - reset-gpios
-  - qcom,tx-device
-  - qcom,rx-device
-  - qcom,micbias1-microvolt
-  - qcom,micbias2-microvolt
-  - qcom,micbias3-microvolt
-  - qcom,micbias4-microvolt
-  - "#sound-dai-cells"
 
 unevaluatedProperties: false
 
diff --git a/Bindings/sound/qcom,wcd939x-sdw.yaml b/Bindings/sound/qcom,wcd939x-sdw.yaml
new file mode 100644
index 0000000000..67ed7701b5
--- /dev/null
+++ b/Bindings/sound/qcom,wcd939x-sdw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire devices on WCD9390/WCD9395
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices. This bindings is for the devices.
+
+properties:
+  compatible:
+    const: sdw20217010e00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host tx ports.
+      In the order of the device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host rx ports.
+      In the order of device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Bindings/sound/qcom,wcd939x.yaml b/Bindings/sound/qcom,wcd939x.yaml
new file mode 100644
index 0000000000..6e76f6a863
--- /dev/null
+++ b/Bindings/sound/qcom,wcd939x.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices.
+  The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
+  subsystems are external to the IC, thus requiring DT port-endpoint graph description
+  to handle USB-C altmode & orientation switching for Audio Accessory Mode.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-codec
+      - items:
+          - const: qcom,wcd9395-codec
+          - const: qcom,wcd9390-codec
+
+  mode-switch:
+    description: Flag the port as possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the WCD939x Codec node to USB MUX subsystems for the
+      purpose of handling altmode muxing and orientation switching to detect and
+      enable Audio Accessory Mode.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    codec {
+        compatible = "qcom,wcd9390-codec";
+        reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+        #sound-dai-cells = <1>;
+        qcom,tx-device = <&wcd939x_tx>;
+        qcom,rx-device = <&wcd939x_rx>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd939x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Bindings/sound/qcom,wcd93xx-common.yaml b/Bindings/sound/qcom,wcd93xx-common.yaml
new file mode 100644
index 0000000000..f78ba148ad
--- /dev/null
+++ b/Bindings/sound/qcom,wcd93xx-common.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Qualcomm WCD93xx Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle
+
+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#sound-dai-cells"
+
+additionalProperties: true
diff --git a/Bindings/sound/qcom,wsa8840.yaml b/Bindings/sound/qcom,wsa8840.yaml
index d717017b0f..22798d22d9 100644
--- a/Bindings/sound/qcom,wsa8840.yaml
+++ b/Bindings/sound/qcom,wsa8840.yaml
@@ -28,6 +28,10 @@ properties:
     description: Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  reset-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 0
 
@@ -37,11 +41,16 @@ properties:
 required:
   - compatible
   - reg
-  - powerdown-gpios
   - '#sound-dai-cells'
   - vdd-1p8-supply
   - vdd-io-supply
 
+oneOf:
+  - required:
+      - powerdown-gpios
+  - required:
+      - reset-gpios
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/sound/realtek,rt1015.yaml b/Bindings/sound/realtek,rt1015.yaml
new file mode 100644
index 0000000000..880196081a
--- /dev/null
+++ b/Bindings/sound/realtek,rt1015.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1015 Mono Class D Audio Amplifier
+
+maintainers:
+  - Jack Yu <jack.yu@realtek.com>
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt1015
+
+  reg:
+    maxItems: 1
+
+  realtek,power-up-delay-ms:
+    description: Set a delay time for flush work to be completed,
+      this vlaue is adjustable depending on platform.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@28 {
+            compatible = "realtek,rt1015";
+            reg = <0x28>;
+            realtek,power-up-delay-ms = <50>;
+        };
+    };
diff --git a/Bindings/sound/rt1015.txt b/Bindings/sound/rt1015.txt
deleted file mode 100644
index e498966d43..0000000000
--- a/Bindings/sound/rt1015.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-RT1015 Mono Class D Audio Amplifier
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt1015".
-
-- reg : The I2C address of the device.
-
-Optional properties:
-
-- realtek,power-up-delay-ms
-  Set a delay time for flush work to be completed,
-  this value is adjustable depending on platform.
-
-Example:
-
-rt1015: codec@28 {
-	compatible = "realtek,rt1015";
-	reg = <0x28>;
-	realtek,power-up-delay-ms = <50>;
-};
diff --git a/Bindings/sound/rt5645.txt b/Bindings/sound/rt5645.txt
index 41a62fd2ae..c1fa379f5f 100644
--- a/Bindings/sound/rt5645.txt
+++ b/Bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git a/Bindings/sound/samsung,tm2.yaml b/Bindings/sound/samsung,tm2.yaml
index 7605925991..cbc7ba3736 100644
--- a/Bindings/sound/samsung,tm2.yaml
+++ b/Bindings/sound/samsung,tm2.yaml
@@ -25,8 +25,11 @@ properties:
     description: Phandles to the codecs.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - description: Phandle to the WM5110 audio codec.
-      - description: Phandle to the HDMI transmitter node.
+      - items:
+          - description: Phandle to the WM5110 audio codec.
+      - items:
+          - description: Phandle to the HDMI transmitter node.
+
 
   samsung,audio-routing:
     description: |
diff --git a/Bindings/spi/atmel,at91rm9200-spi.yaml b/Bindings/spi/atmel,at91rm9200-spi.yaml
index 58367587bf..32e7c14033 100644
--- a/Bindings/spi/atmel,at91rm9200-spi.yaml
+++ b/Bindings/spi/atmel,at91rm9200-spi.yaml
@@ -22,7 +22,6 @@ properties:
           - const: atmel,at91rm9200-spi
       - items:
           - const: microchip,sam9x7-spi
-          - const: microchip,sam9x60-spi
           - const: atmel,at91rm9200-spi
 
   reg:
diff --git a/Bindings/spi/samsung,spi.yaml b/Bindings/spi/samsung,spi.yaml
index 79da99ca0e..f681372da8 100644
--- a/Bindings/spi/samsung,spi.yaml
+++ b/Bindings/spi/samsung,spi.yaml
@@ -17,11 +17,13 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - google,gs101-spi
           - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
           - samsung,s3c6410-spi
           - samsung,s5pv210-spi # for S5PV210 and S5PC110
           - samsung,exynos4210-spi
           - samsung,exynos5433-spi
+          - samsung,exynos850-spi
           - samsung,exynosautov9-spi
           - tesla,fsd-spi
       - const: samsung,exynos7-spi
@@ -74,8 +76,6 @@ required:
   - compatible
   - clocks
   - clock-names
-  - dmas
-  - dma-names
   - interrupts
   - reg
 
diff --git a/Bindings/spi/spi-controller.yaml b/Bindings/spi/spi-controller.yaml
index 524f6fe8c2..093150c0cb 100644
--- a/Bindings/spi/spi-controller.yaml
+++ b/Bindings/spi/spi-controller.yaml
@@ -69,6 +69,21 @@ properties:
          Should be generally avoided and be replaced by
          spi-cs-high + ACTIVE_HIGH.
 
+  fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX and TX data FIFOs in bytes.
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX data FIFO in bytes.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the TX data FIFO in bytes.
+
   num-cs:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -116,6 +131,10 @@ patternProperties:
       - compatible
       - reg
 
+dependencies:
+  rx-fifo-depth: [ tx-fifo-depth ]
+  tx-fifo-depth: [ rx-fifo-depth ]
+
 allOf:
   - if:
       not:
@@ -129,6 +148,14 @@ allOf:
       properties:
         "#address-cells":
           const: 0
+  - not:
+      required:
+        - fifo-depth
+        - rx-fifo-depth
+  - not:
+      required:
+        - fifo-depth
+        - tx-fifo-depth
 
 additionalProperties: true
 
diff --git a/Bindings/spi/spi-fsl-lpspi.yaml b/Bindings/spi/spi-fsl-lpspi.yaml
index 727c5346b8..2ff1742447 100644
--- a/Bindings/spi/spi-fsl-lpspi.yaml
+++ b/Bindings/spi/spi-fsl-lpspi.yaml
@@ -22,6 +22,7 @@ properties:
           - enum:
               - fsl,imx8ulp-spi
               - fsl,imx93-spi
+              - fsl,imx95-spi
           - const: fsl,imx7ulp-spi
   reg:
     maxItems: 1
diff --git a/Bindings/spi/spi-nxp-fspi.yaml b/Bindings/spi/spi-nxp-fspi.yaml
index 7fd5911454..4a5f41bde0 100644
--- a/Bindings/spi/spi-nxp-fspi.yaml
+++ b/Bindings/spi/spi-nxp-fspi.yaml
@@ -15,12 +15,18 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - nxp,imx8dxl-fspi
-      - nxp,imx8mm-fspi
-      - nxp,imx8mp-fspi
-      - nxp,imx8qxp-fspi
-      - nxp,lx2160a-fspi
+    oneOf:
+      - enum:
+          - nxp,imx8dxl-fspi
+          - nxp,imx8mm-fspi
+          - nxp,imx8mp-fspi
+          - nxp,imx8qxp-fspi
+          - nxp,lx2160a-fspi
+      - items:
+          - enum:
+              - nxp,imx93-fspi
+              - nxp,imx95-fspi
+          - const: nxp,imx8mm-fspi
 
   reg:
     items:
diff --git a/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
index a1c9698595..cf07b8f787 100644
--- a/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -56,7 +56,7 @@ properties:
   ranges: true
 
 patternProperties:
-  "^sram@[a-z0-9]+":
+  "^sram@[a-f0-9]+":
     $ref: /schemas/sram/sram.yaml#
     unevaluatedProperties: false
 
diff --git a/Bindings/submitting-patches.rst b/Bindings/submitting-patches.rst
index 36a17b250c..a64f21a5f2 100644
--- a/Bindings/submitting-patches.rst
+++ b/Bindings/submitting-patches.rst
@@ -15,6 +15,11 @@ I. For patch submitters
 
        "dt-bindings: <binding dir>: ..."
 
+     Few subsystems, like ASoC, media, regulators and SPI, expect reverse order
+     of the prefixes::
+
+       "<binding dir>: dt-bindings: ..."
+
      The 80 characters of the subject are precious. It is recommended to not
      use "Documentation" or "doc" because that is implied. All bindings are
      docs. Repeating "binding" again should also be avoided.
@@ -42,28 +47,18 @@ I. For patch submitters
      the code implementing the binding.
 
   6) Any compatible strings used in a chip or board DTS file must be
-     previously documented in the corresponding DT binding text file
+     previously documented in the corresponding DT binding file
      in Documentation/devicetree/bindings.  This rule applies even if
      the Linux device driver does not yet match on the compatible
      string.  [ checkpatch will emit warnings if this step is not
      followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
      ("checkpatch: add DT compatible string documentation checks"). ]
 
-  7) The wildcard "<chip>" may be used in compatible strings, as in
-     the following example:
-
-         - compatible: Must contain '"nvidia,<chip>-pcie",
-           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
-
-     As in the above example, the known values of "<chip>" should be
-     documented if it is used.
-
-  8) If a documented compatible string is not yet matched by the
+  7) If a documented compatible string is not yet matched by the
      driver, the documentation should also include a compatible
-     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
-     example above).
+     string that is matched by the driver.
 
-  9) Bindings are actively used by multiple projects other than the Linux
+  8) Bindings are actively used by multiple projects other than the Linux
      Kernel, extra care and consideration may need to be taken when making changes
      to existing bindings.
 
diff --git a/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 9b2272a9ec..6b3aea6d73 100644
--- a/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -21,6 +21,7 @@ properties:
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
+      - allwinner,sun50i-h616-ths
 
   clocks:
     minItems: 1
@@ -50,6 +51,10 @@ properties:
   nvmem-cell-names:
     const: calibration
 
+  allwinner,sram:
+    maxItems: 1
+    description: phandle to device controlling temperate offset SYS_CFG register
+
   # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
@@ -65,6 +70,7 @@ allOf:
               - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
+              - allwinner,sun50i-h616-ths
 
     then:
       properties:
@@ -82,6 +88,17 @@ allOf:
         clock-names:
           minItems: 2
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: allwinner,sun50i-h616-ths
+
+    then:
+      properties:
+        allwinner,sram: false
+
   - if:
       properties:
         compatible:
@@ -101,17 +118,12 @@ allOf:
           const: 1
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - allwinner,sun8i-h3-ths
-              - allwinner,sun8i-r40-ths
-              - allwinner,sun20i-d1-ths
-              - allwinner,sun50i-a64-ths
-              - allwinner,sun50i-a100-ths
-              - allwinner,sun50i-h5-ths
-              - allwinner,sun50i-h6-ths
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - allwinner,sun8i-a83t-ths
 
     then:
       required:
diff --git a/Bindings/thermal/da9062-thermal.txt b/Bindings/thermal/da9062-thermal.txt
deleted file mode 100644
index e241bb5a55..0000000000
--- a/Bindings/thermal/da9062-thermal.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Dialog DA9062/61 TJUNC Thermal Module
-
-This module is part of the DA9061/DA9062. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-
-Junction temperature thermal module uses an interrupt signal to identify
-high THERMAL_TRIP_HOT temperatures for the PMIC device.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-        "dlg,da9061-thermal", "dlg,da9062-thermal"
-        "dlg,da9062-thermal"
-
-Optional properties:
-
-- polling-delay-passive : Specify the polling period, measured in
-    milliseconds, between thermal zone device update checks.
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		thermal {
-			compatible = "dlg,da9062-thermal";
-			polling-delay-passive = <3000>;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		thermal {
-			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
-			polling-delay-passive = <3000>;
-		};
-	};
diff --git a/Bindings/thermal/dlg,da9062-thermal.yaml b/Bindings/thermal/dlg,da9062-thermal.yaml
new file mode 100644
index 0000000000..e8b2cac410
--- /dev/null
+++ b/Bindings/thermal/dlg,da9062-thermal.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9062/61 TJUNC Thermal Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062. For more details about entire
+  DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  Junction temperature thermal module uses an interrupt signal to identify
+  high THERMAL_TRIP_HOT temperatures for the PMIC device.
+
+properties:
+  compatible:
+    oneOf:
+      - const: dlg,da9062-thermal
+      - items:
+          - const: dlg,da9061-thermal
+          - const: dlg,da9062-thermal
+
+  polling-delay-passive:
+    description:
+      Specify the polling period, measured in milliseconds, between
+      thermal zone device update checks.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/thermal/qoriq-thermal.yaml b/Bindings/thermal/qoriq-thermal.yaml
index 1457440272..d155d6799d 100644
--- a/Bindings/thermal/qoriq-thermal.yaml
+++ b/Bindings/thermal/qoriq-thermal.yaml
@@ -33,7 +33,8 @@ properties:
     description: |
       The values to be programmed into TTRnCR, as specified by the SoC
       reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
-    maxItems: 4
+    minItems: 2
+    maxItems: 7
 
   fsl,tmu-calibration:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
diff --git a/Bindings/thermal/rcar-gen3-thermal.yaml b/Bindings/thermal/rcar-gen3-thermal.yaml
index ecf276fd15..6a81cb6e11 100644
--- a/Bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Bindings/thermal/rcar-gen3-thermal.yaml
@@ -29,6 +29,7 @@ properties:
       - renesas,r8a779a0-thermal # R-Car V3U
       - renesas,r8a779f0-thermal # R-Car S4-8
       - renesas,r8a779g0-thermal # R-Car V4H
+      - renesas,r8a779h0-thermal # R-Car V4M
 
   reg: true
 
@@ -90,6 +91,7 @@ else:
             enum:
               - renesas,r8a779f0-thermal
               - renesas,r8a779g0-thermal
+              - renesas,r8a779h0-thermal
   then:
     required:
       - interrupts
diff --git a/Bindings/thermal/thermal-zones.yaml b/Bindings/thermal/thermal-zones.yaml
index dbd52620d2..68398e7e86 100644
--- a/Bindings/thermal/thermal-zones.yaml
+++ b/Bindings/thermal/thermal-zones.yaml
@@ -228,8 +228,6 @@ patternProperties:
             additionalProperties: false
 
     required:
-      - polling-delay
-      - polling-delay-passive
       - thermal-sensors
       - trips
 
diff --git a/Bindings/timer/arm,arch_timer_mmio.yaml b/Bindings/timer/arm,arch_timer_mmio.yaml
index 7a4a6ab859..ab8f289931 100644
--- a/Bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Bindings/timer/arm,arch_timer_mmio.yaml
@@ -60,7 +60,7 @@ properties:
       be implemented in an always-on power domain."
 
 patternProperties:
-  '^frame@[0-9a-z]*$':
+  '^frame@[0-9a-f]+$':
     type: object
     additionalProperties: false
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
diff --git a/Bindings/timer/cdns,ttc.yaml b/Bindings/timer/cdns,ttc.yaml
index dbba780c9b..da342464d3 100644
--- a/Bindings/timer/cdns,ttc.yaml
+++ b/Bindings/timer/cdns,ttc.yaml
@@ -32,12 +32,23 @@ properties:
     description: |
       Bit width of the timer, necessary if not 16.
 
+  "#pwm-cells":
+    const: 3
+
 required:
   - compatible
   - reg
-  - interrupts
   - clocks
 
+allOf:
+  - if:
+      not:
+        required:
+          - "#pwm-cells"
+    then:
+      required:
+        - interrupts
+
 additionalProperties: false
 
 examples:
@@ -50,3 +61,12 @@ examples:
         clocks = <&cpu_clk 3>;
         timer-width = <32>;
     };
+
+  - |
+    pwm: pwm@f8002000 {
+        compatible = "cdns,ttc";
+        reg = <0xf8002000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+        #pwm-cells = <3>;
+    };
diff --git a/Bindings/timer/mediatek,mtk-timer.txt b/Bindings/timer/mediatek,mtk-timer.txt
deleted file mode 100644
index b3e797e8aa..0000000000
--- a/Bindings/timer/mediatek,mtk-timer.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-MediaTek Timers
----------------
-
-MediaTek SoCs have different timers on different platforms,
-- CPUX (ARM/ARM64 System Timer)
-- GPT (General Purpose Timer)
-- SYST (System Timer)
-
-The proper timer will be selected automatically by driver.
-
-Required properties:
-- compatible should contain:
-	For those SoCs that use GPT
-	* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
-	* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
-	* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
-	* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
-	* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
-	* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
-	* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
-	* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
-	* "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
-	* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
-
-	For those SoCs that use SYST
-	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
-	* "mediatek,mt8186-timer" for MT8186 compatible timers (SYST)
-	* "mediatek,mt8188-timer" for MT8188 compatible timers (SYST)
-	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
-	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
-	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
-	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
-
-	For those SoCs that use CPUX
-	* "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
-	* "mediatek,mt8365-systimer" for MT8365 compatible timers (CPUX)
-
-- reg: Should contain location and length for timer register.
-- clocks: Should contain system clock.
-
-Examples:
-
-	timer@10008000 {
-		compatible = "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>;
-	};
diff --git a/Bindings/timer/mediatek,timer.yaml b/Bindings/timer/mediatek,timer.yaml
new file mode 100644
index 0000000000..f68fc7050c
--- /dev/null
+++ b/Bindings/timer/mediatek,timer.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mediatek,timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC timers
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  MediaTek SoCs have different timers on different platforms,
+  CPUX (ARM/ARM64 System Timer), GPT (General Purpose Timer)
+  and SYST (System Timer).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt6577-timer
+              - mediatek,mt6765-timer
+              - mediatek,mt6795-systimer
+      # GPT Timers
+      - items:
+          - enum:
+              - mediatek,mt2701-timer
+              - mediatek,mt6580-timer
+              - mediatek,mt6582-timer
+              - mediatek,mt6589-timer
+              - mediatek,mt7623-timer
+              - mediatek,mt8127-timer
+              - mediatek,mt8135-timer
+              - mediatek,mt8173-timer
+              - mediatek,mt8516-timer
+          - const: mediatek,mt6577-timer
+      # SYST Timers
+      - items:
+          - enum:
+              - mediatek,mt7629-timer
+              - mediatek,mt8183-timer
+              - mediatek,mt8186-timer
+              - mediatek,mt8188-timer
+              - mediatek,mt8192-timer
+              - mediatek,mt8195-timer
+              - mediatek,mt8365-systimer
+          - const: mediatek,mt6765-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Timer clock
+      - description: RTC or bus clock
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@10008000 {
+      compatible = "mediatek,mt6577-timer";
+      reg = <0x10008000 0x80>;
+      interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&system_clk>;
+    };
diff --git a/Bindings/timer/mrvl,mmp-timer.yaml b/Bindings/timer/mrvl,mmp-timer.yaml
index 1ee4aab695..fe6bc41737 100644
--- a/Bindings/timer/mrvl,mmp-timer.yaml
+++ b/Bindings/timer/mrvl,mmp-timer.yaml
@@ -9,7 +9,7 @@ title: Marvell MMP Timer
 maintainers:
   - Daniel Lezcano <daniel.lezcano@linaro.org>
   - Thomas Gleixner <tglx@linutronix.de>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   $nodename:
diff --git a/Bindings/timer/nxp,sysctr-timer.yaml b/Bindings/timer/nxp,sysctr-timer.yaml
index 2b9653dafa..891cca0095 100644
--- a/Bindings/timer/nxp,sysctr-timer.yaml
+++ b/Bindings/timer/nxp,sysctr-timer.yaml
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: nxp,sysctr-timer
+    enum:
+      - nxp,imx95-sysctr-timer
+      - nxp,sysctr-timer
 
   reg:
     maxItems: 1
diff --git a/Bindings/timer/ralink,cevt-systick.yaml b/Bindings/timer/ralink,cevt-systick.yaml
new file mode 100644
index 0000000000..59d97feddf
--- /dev/null
+++ b/Bindings/timer/ralink,cevt-systick.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,cevt-systick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System tick counter present in Ralink family SoCs
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: ralink,cevt-systick
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    systick@d00 {
+        compatible = "ralink,cevt-systick";
+        reg = <0xd00 0x10>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <7>;
+    };
+...
diff --git a/Bindings/timer/renesas,ostm.yaml b/Bindings/timer/renesas,ostm.yaml
index 7207929e5c..8b06a68176 100644
--- a/Bindings/timer/renesas,ostm.yaml
+++ b/Bindings/timer/renesas,ostm.yaml
@@ -23,7 +23,7 @@ properties:
       - enum:
           - renesas,r7s72100-ostm  # RZ/A1H
           - renesas,r7s9210-ostm   # RZ/A2M
-          - renesas,r9a07g043-ostm # RZ/G2UL
+          - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ostm # RZ/G2{L,LC}
           - renesas,r9a07g054-ostm # RZ/V2L
       - const: renesas,ostm        # Generic
diff --git a/Bindings/timer/renesas,tmu.yaml b/Bindings/timer/renesas,tmu.yaml
index a67e427a9e..84bbe15028 100644
--- a/Bindings/timer/renesas,tmu.yaml
+++ b/Bindings/timer/renesas,tmu.yaml
@@ -46,7 +46,19 @@ properties:
 
   interrupts:
     minItems: 2
-    maxItems: 3
+    items:
+      - description: Underflow interrupt, channel 0
+      - description: Underflow interrupt, channel 1
+      - description: Underflow interrupt, channel 2
+      - description: Input capture interrupt, channel 2
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: tuni0
+      - const: tuni1
+      - const: tuni2
+      - const: ticpi2
 
   clocks:
     maxItems: 1
@@ -100,7 +112,9 @@ examples:
             reg = <0xffd80000 0x30>;
             interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
             clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
             clock-names = "fck";
             power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/Bindings/timer/samsung,exynos4210-mct.yaml b/Bindings/timer/samsung,exynos4210-mct.yaml
index 829bd2227f..774b7992a0 100644
--- a/Bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Bindings/timer/samsung,exynos4210-mct.yaml
@@ -26,6 +26,7 @@ properties:
       - items:
           - enum:
               - axis,artpec8-mct
+              - google,gs101-mct
               - samsung,exynos3250-mct
               - samsung,exynos5250-mct
               - samsung,exynos5260-mct
@@ -127,6 +128,7 @@ allOf:
           contains:
             enum:
               - axis,artpec8-mct
+              - google,gs101-mct
               - samsung,exynos5260-mct
               - samsung,exynos5420-mct
               - samsung,exynos5433-mct
diff --git a/Bindings/tpm/tcg,tpm_tis-spi.yaml b/Bindings/tpm/tcg,tpm_tis-spi.yaml
index c3413b47ac..6cb2de7cb5 100644
--- a/Bindings/tpm/tcg,tpm_tis-spi.yaml
+++ b/Bindings/tpm/tcg,tpm_tis-spi.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     items:
       - enum:
+          - atmel,attpm20p
           - infineon,slb9670
           - st,st33htpm-spi
           - st,st33zp24-spi
diff --git a/Bindings/trivial-devices.yaml b/Bindings/trivial-devices.yaml
index 79dcd92c4a..e07be7bf83 100644
--- a/Bindings/trivial-devices.yaml
+++ b/Bindings/trivial-devices.yaml
@@ -28,6 +28,7 @@ properties:
 
   compatible:
     items:
+      # Entries are sorted alphanumerically by the compatible
       - enum:
             # Acbel fsg032 power supply
           - acbel,fsg032
@@ -47,14 +48,16 @@ properties:
           - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
+            # Temperature monitoring of Astera Labs PT5161L PCIe retimer
+          - asteralabs,pt5161l
             # i2c serial eeprom (24cxx)
           - at,24c08
+            # i2c h/w elliptic curve crypto module
+          - atmel,atecc508a
             # ATSHA204 - i2c h/w symmetric crypto module
           - atmel,atsha204
             # ATSHA204A - i2c h/w symmetric crypto module
           - atmel,atsha204a
-            # i2c h/w elliptic curve crypto module
-          - atmel,atecc508a
             # BPA-RS600: Power Supply
           - blutek,bpa-rs600
             # Bosch Sensortec pressure, temperature, humididty and VOC sensor
@@ -115,20 +118,6 @@ properties:
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
-            # Monolithic Power Systems Inc. multi-phase controller mp2856
-          - mps,mp2856
-            # Monolithic Power Systems Inc. multi-phase controller mp2857
-          - mps,mp2857
-            # Monolithic Power Systems Inc. multi-phase controller mp2888
-          - mps,mp2888
-            # Monolithic Power Systems Inc. multi-phase controller mp2971
-          - mps,mp2971
-            # Monolithic Power Systems Inc. multi-phase controller mp2973
-          - mps,mp2973
-            # Monolithic Power Systems Inc. multi-phase controller mp2975
-          - mps,mp2975
-            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
-          - mps,mp5990
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -137,16 +126,10 @@ properties:
           - ibm,cffps1
             # IBM Common Form Factor Power Supply Versions 2
           - ibm,cffps2
+            # Infineon barometric pressure and temperature sensor
+          - infineon,dps310
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
-            # Infineon IR38060 Voltage Regulator
-          - infineon,ir38060
-            # Infineon IR38064 Voltage Regulator
-          - infineon,ir38064
-            # Infineon IR38164 Voltage Regulator
-          - infineon,ir38164
-            # Infineon IR38263 Voltage Regulator
-          - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
@@ -195,6 +178,8 @@ properties:
           - maxim,max1237
             # Temperature Sensor, I2C interface
           - maxim,max1619
+            # 3-Channel Remote Temperature Sensor
+          - maxim,max31730
             # 10-bit 10 kOhm linear programmable voltage divider
           - maxim,max5481
             # 10-bit 50 kOhm linear programmable voltage divider
@@ -207,8 +192,6 @@ properties:
           - maxim,max6621
             # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
           - maxim,max6625
-            # 3-Channel Remote Temperature Sensor
-          - maxim,max31730
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
             # Measurement Specialities I2C temperature and humidity sensor
@@ -239,8 +222,6 @@ properties:
           - memsic,mxc6655
             # Menlo on-board CPLD trivial SPI device
           - menlo,m53cpld
-            # Micron SPI NOR Authenta
-          - micron,spi-authenta
             # Microchip differential I2C ADC, 1 Channel, 18 bit
           - microchip,mcp3421
             # Microchip differential I2C ADC, 2 Channel, 18 bit
@@ -257,40 +238,58 @@ properties:
           - microchip,mcp3427
             # Microchip differential I2C ADC, 4 Channel, 16 bit
           - microchip,mcp3428
-            # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4017-502
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4017-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4017-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4017-104
             # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4018-502
+          - microchip,mcp4017-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4017-503
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4018-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4018-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4018-104
             # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4019-502
+          - microchip,mcp4018-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4018-503
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4019-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4019-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4019-104
+            # Microchip 7-bit Single I2C Digital POT (5k)
+          - microchip,mcp4019-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4019-503
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc654
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc655
+            # Micron SPI NOR Authenta
+          - micron,spi-authenta
             # MiraMEMS DA226 2-axis 14-bit digital accelerometer
           - miramems,da226
             # MiraMEMS DA280 3-axis 14-bit digital accelerometer
           - miramems,da280
             # MiraMEMS DA311 3-axis 12-bit digital accelerometer
           - miramems,da311
+            # Monolithic Power Systems Inc. multi-phase controller mp2856
+          - mps,mp2856
+            # Monolithic Power Systems Inc. multi-phase controller mp2857
+          - mps,mp2857
+            # Monolithic Power Systems Inc. multi-phase controller mp2888
+          - mps,mp2888
+            # Monolithic Power Systems Inc. multi-phase controller mp2971
+          - mps,mp2971
+            # Monolithic Power Systems Inc. multi-phase controller mp2973
+          - mps,mp2973
+            # Monolithic Power Systems Inc. multi-phase controller mp2975
+          - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+          - mps,mp5990
+            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+          - mps,mpq8785
             # Temperature sensor with integrated fan control
           - national,lm63
             # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
@@ -321,12 +320,12 @@ properties:
           - samsung,exynos-sataphy-i2c
             # Semtech sx1301 baseband processor
           - semtech,sx1301
-            # Sensirion low power multi-pixel gas sensor with I2C interface
-          - sensirion,sgpc3
             # Sensirion multi-pixel gas sensor with I2C interface
           - sensirion,sgp30
             # Sensirion gas sensor with I2C interface
           - sensirion,sgp40
+            # Sensirion low power multi-pixel gas sensor with I2C interface
+          - sensirion,sgpc3
             # Sensirion temperature & humidity sensor with I2C interface
           - sensirion,sht4x
             # Sensortek 3 axis accelerometer
@@ -372,8 +371,6 @@ properties:
           - ti,lm74
             # Temperature sensor with integrated fan control
           - ti,lm96000
-            # I2C Touch-Screen Controller
-          - ti,tsc2003
             # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
           - ti,tmp103
             # Thermometer with SPI interface
@@ -395,10 +392,12 @@ properties:
           - ti,tps544b25
           - ti,tps544c20
           - ti,tps544c25
-            # Winbond/Nuvoton H/W Monitor
-          - winbond,w83793
+            # I2C Touch-Screen Controller
+          - ti,tsc2003
             # Vicor Corporation Digital Supervisor
           - vicor,pli1209bc
+            # Winbond/Nuvoton H/W Monitor
+          - winbond,w83793
 
 required:
   - compatible
diff --git a/Bindings/ufs/qcom,ufs.yaml b/Bindings/ufs/qcom,ufs.yaml
index 10c146424b..cd3680dc00 100644
--- a/Bindings/ufs/qcom,ufs.yaml
+++ b/Bindings/ufs/qcom,ufs.yaml
@@ -27,10 +27,13 @@ properties:
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
           - qcom,sa8775p-ufshc
+          - qcom,sc7180-ufshc
           - qcom,sc7280-ufshc
+          - qcom,sc8180x-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6115-ufshc
+          - qcom,sm6125-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -42,11 +45,11 @@ properties:
       - const: jedec,ufs-2.0
 
   clocks:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   clock-names:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   dma-coherent: true
@@ -112,6 +115,31 @@ required:
 allOf:
   - $ref: ufs-common.yaml
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
   - if:
       properties:
         compatible:
@@ -120,6 +148,7 @@ allOf:
               - qcom,msm8998-ufshc
               - qcom,sa8775p-ufshc
               - qcom,sc7280-ufshc
+              - qcom,sc8180x-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc
@@ -215,6 +244,7 @@ allOf:
           contains:
             enum:
               - qcom,sm6115-ufshc
+              - qcom,sm6125-ufshc
     then:
       properties:
         clocks:
@@ -248,7 +278,7 @@ allOf:
         reg:
           maxItems: 1
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 8
     else:
       properties:
@@ -256,7 +286,7 @@ allOf:
           minItems: 1
           maxItems: 2
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 11
 
 unevaluatedProperties: false
diff --git a/Bindings/usb/analogix,anx7411.yaml b/Bindings/usb/analogix,anx7411.yaml
index e4d893369d..3f5857aee3 100644
--- a/Bindings/usb/analogix,anx7411.yaml
+++ b/Bindings/usb/analogix,anx7411.yaml
@@ -23,24 +23,11 @@ properties:
   connector:
     type: object
     $ref: ../connector/usb-connector.yaml
-    unevaluatedProperties: false
-
-    description:
-      Properties for usb c connector.
 
     properties:
       compatible:
         const: usb-c-connector
 
-      power-role: true
-
-      data-role: true
-
-      try-power-role: true
-
-    required:
-      - compatible
-
 required:
   - compatible
   - reg
diff --git a/Bindings/usb/ci-hdrc-usb2.yaml b/Bindings/usb/ci-hdrc-usb2.yaml
index b7e664f739..3b56e0edb1 100644
--- a/Bindings/usb/ci-hdrc-usb2.yaml
+++ b/Bindings/usb/ci-hdrc-usb2.yaml
@@ -313,7 +313,7 @@ properties:
 
   usb-phy:
     description: phandle for the PHY device. Use "phys" instead.
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     deprecated: true
 
   fsl,usbphy:
diff --git a/Bindings/usb/cypress,hx3.yaml b/Bindings/usb/cypress,hx3.yaml
index 47add0d85f..28096619a8 100644
--- a/Bindings/usb/cypress,hx3.yaml
+++ b/Bindings/usb/cypress,hx3.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/usb/cypress,hx3.yaml#
diff --git a/Bindings/usb/fcs,fsa4480.yaml b/Bindings/usb/fcs,fsa4480.yaml
index f9410eb76a..8b25b9a01c 100644
--- a/Bindings/usb/fcs,fsa4480.yaml
+++ b/Bindings/usb/fcs,fsa4480.yaml
@@ -27,13 +27,8 @@ properties:
   vcc-supply:
     description: power supply (2.7V-5.5V)
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -79,6 +74,9 @@ required:
   - reg
   - port
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/generic-ehci.yaml b/Bindings/usb/generic-ehci.yaml
index 87986c45be..2ed178f16a 100644
--- a/Bindings/usb/generic-ehci.yaml
+++ b/Bindings/usb/generic-ehci.yaml
@@ -77,6 +77,7 @@ properties:
           - const: usb-ehci
       - enum:
           - generic-ehci
+          - marvell,ac5-ehci
           - marvell,armada-3700-ehci
           - marvell,orion-ehci
           - nuvoton,npcm750-ehci
diff --git a/Bindings/usb/gpio-sbu-mux.yaml b/Bindings/usb/gpio-sbu-mux.yaml
index d3b2b666ec..88e1607cf0 100644
--- a/Bindings/usb/gpio-sbu-mux.yaml
+++ b/Bindings/usb/gpio-sbu-mux.yaml
@@ -33,13 +33,8 @@ properties:
   vcc-supply:
     description: power supply
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -54,6 +49,9 @@ required:
   - orientation-switch
   - port
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
new file mode 100644
index 0000000000..f301169439
--- /dev/null
+++ b/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Hi3798MV200 DWC3 USB SoC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@foxmail.com>
+
+properties:
+  compatible:
+    const: hisilicon,hi3798mv200-dwc3
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Controller bus clock
+      - description: Controller suspend clock
+      - description: Controller reference clock
+      - description: Controller gm clock
+      - description: Controller gs clock
+      - description: Controller utmi clock
+      - description: Controller pipe clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: suspend
+      - const: ref
+      - const: gm
+      - const: gs
+      - const: utmi
+      - const: pipe
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: soft
+
+patternProperties:
+  '^usb@[0-9a-f]+$':
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "hisilicon,hi3798mv200-dwc3";
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        clocks = <&clk_bus>,
+                 <&clk_suspend>,
+                 <&clk_ref>,
+                 <&clk_gm>,
+                 <&clk_gs>,
+                 <&clk_utmi>,
+                 <&clk_pipe>;
+        clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe";
+        resets = <&crg 0xb0 12>;
+        reset-names = "soft";
+
+        usb@98a0000 {
+            compatible = "snps,dwc3";
+            reg = <0x98a0000 0x10000>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk_bus>,
+                     <&clk_suspend>,
+                     <&clk_ref>;
+            clock-names = "bus_early", "suspend", "ref";
+            phys = <&usb2_phy1_port2>, <&combphy0 0>;
+            phy-names = "usb2-phy", "usb3-phy";
+            maximum-speed = "super-speed";
+            dr_mode = "host";
+        };
+    };
diff --git a/Bindings/usb/ite,it5205.yaml b/Bindings/usb/ite,it5205.yaml
new file mode 100644
index 0000000000..36ec4251b5
--- /dev/null
+++ b/Bindings/usb/ite,it5205.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ite,it5205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT5202 Type-C USB Alternate Mode Passive MUX
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Tianping Fang <tianping.fang@mediatek.com>
+
+properties:
+  compatible:
+    const: ite,it5205
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Power supply for VCC pin (3.3V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ite,ovp-enable:
+    description: Enable Over Voltage Protection functionality
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the IT5205 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - orientation-switch
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@48 {
+          compatible = "ite,it5205";
+          reg = <0x48>;
+
+          mode-switch;
+          orientation-switch;
+
+          vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+          port {
+            it5205_usbss_sbu: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
diff --git a/Bindings/usb/mediatek,mtu3.yaml b/Bindings/usb/mediatek,mtu3.yaml
index a59d91243a..d4e187c78a 100644
--- a/Bindings/usb/mediatek,mtu3.yaml
+++ b/Bindings/usb/mediatek,mtu3.yaml
@@ -185,7 +185,10 @@ properties:
             2 - used by mt2712 etc, revision 2 with following IPM rule;
             101 - used by mt8183, specific 1.01;
             102 - used by mt8192, specific 1.02;
-          enum: [1, 2, 101, 102]
+            103 - used by mt8195, IP0, specific 1.03;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 105, 106]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Bindings/usb/microchip,usb5744.yaml b/Bindings/usb/microchip,usb5744.yaml
index 445183d9d6..e2a72deae7 100644
--- a/Bindings/usb/microchip,usb5744.yaml
+++ b/Bindings/usb/microchip,usb5744.yaml
@@ -72,8 +72,6 @@ allOf:
         i2c-bus: false
     else:
       $ref: /schemas/usb/usb-device.yaml
-      required:
-        - peer-hub
 
 additionalProperties: false
 
diff --git a/Bindings/usb/nxp,ptn36502.yaml b/Bindings/usb/nxp,ptn36502.yaml
index eee548ac1a..d805dde807 100644
--- a/Bindings/usb/nxp,ptn36502.yaml
+++ b/Bindings/usb/nxp,ptn36502.yaml
@@ -20,13 +20,8 @@ properties:
   vdd18-supply:
     description: Power supply for VDD18 pin
 
-  retimer-switch:
-    description: Flag the port as possible handle of SuperSpeed signals retiming
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  orientation-switch: true
+  retimer-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -49,6 +44,9 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/nxp,ptn5110.yaml b/Bindings/usb/nxp,ptn5110.yaml
index eaedb4cc6b..65a8632b4d 100644
--- a/Bindings/usb/nxp,ptn5110.yaml
+++ b/Bindings/usb/nxp,ptn5110.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: nxp,ptn5110
+    items:
+      - const: nxp,ptn5110
+      - const: tcpci
 
   reg:
     maxItems: 1
@@ -41,7 +43,7 @@ examples:
         #size-cells = <0>;
 
         tcpci@50 {
-            compatible = "nxp,ptn5110";
+            compatible = "nxp,ptn5110", "tcpci";
             reg = <0x50>;
             interrupt-parent = <&gpio3>;
             interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Bindings/usb/onnn,nb7vpq904m.yaml b/Bindings/usb/onnn,nb7vpq904m.yaml
index c0201da002..589914d22b 100644
--- a/Bindings/usb/onnn,nb7vpq904m.yaml
+++ b/Bindings/usb/onnn,nb7vpq904m.yaml
@@ -21,14 +21,8 @@ properties:
     description: power supply (1.8V)
 
   enable-gpios: true
-
-  retimer-switch:
-    description: Flag the port as possible handle of SuperSpeed signals retiming
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  orientation-switch: true
+  retimer-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -95,6 +89,9 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/qcom,dwc3.yaml b/Bindings/usb/qcom,dwc3.yaml
index 63d150b216..38a3404ec7 100644
--- a/Bindings/usb/qcom,dwc3.yaml
+++ b/Bindings/usb/qcom,dwc3.yaml
@@ -102,7 +102,7 @@ properties:
     description: |
       Different types of interrupts are used based on HS PHY used on target:
         - pwr_event: Used for wakeup based on other power events.
-        - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+        - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
                        hs_phy_irq which is not triggered by default and its
                        functionality is mutually exclusive to that of
                        {dp/dm}_hs_phy_irq and qusb2_phy_irq.
diff --git a/Bindings/usb/qcom,pmic-typec.yaml b/Bindings/usb/qcom,pmic-typec.yaml
index 55df3129a0..d9694570c4 100644
--- a/Bindings/usb/qcom,pmic-typec.yaml
+++ b/Bindings/usb/qcom,pmic-typec.yaml
@@ -14,8 +14,19 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-typec
+    oneOf:
+      - enum:
+          - qcom,pmi632-typec
+          - qcom,pm8150b-typec
+      - items:
+          - enum:
+              - qcom,pm6150-typec
+          - const: qcom,pm8150b-typec
+      - items:
+          - enum:
+              - qcom,pm4125-typec
+          - const: qcom,pmi632-typec
+
 
   connector:
     type: object
@@ -24,9 +35,11 @@ properties:
 
   reg:
     description: Type-C port and pdphy SPMI register base offsets
+    minItems: 1
     maxItems: 2
 
   interrupts:
+    minItems: 8
     items:
       - description: Type-C CC attach notification, VBUS error, tCCDebounce done
       - description: Type-C VCONN powered
@@ -46,6 +59,7 @@ properties:
       - description: Power Domain Fast Role Swap event
 
   interrupt-names:
+    minItems: 8
     items:
       - const: or-rid-detect-change
       - const: vpd-detect
@@ -81,7 +95,33 @@ required:
   - interrupts
   - interrupt-names
   - vdd-vbus-supply
-  - vdd-pdphy-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi632-typec
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        interrupts:
+          maxItems: 8
+        interrupt-names:
+          maxItems: 8
+        vdd-pdphy-supply: false
+    else:
+      properties:
+        reg:
+          maxItems: 2
+        interrupts:
+          minItems: 16
+        interrupt-names:
+          maxItems: 16
+      required:
+        - vdd-pdphy-supply
 
 additionalProperties: false
 
diff --git a/Bindings/usb/qcom,wcd939x-usbss.yaml b/Bindings/usb/qcom,wcd939x-usbss.yaml
index 7ddfd3313a..96346723f3 100644
--- a/Bindings/usb/qcom,wcd939x-usbss.yaml
+++ b/Bindings/usb/qcom,wcd939x-usbss.yaml
@@ -35,13 +35,8 @@ properties:
   vdd-supply:
     description: USBSS VDD power supply
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -63,6 +58,9 @@ required:
   - reg
   - ports
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/realtek,rts5411.yaml b/Bindings/usb/realtek,rts5411.yaml
index f0784d2e86..0874fc21f6 100644
--- a/Bindings/usb/realtek,rts5411.yaml
+++ b/Bindings/usb/realtek,rts5411.yaml
@@ -21,6 +21,12 @@ properties:
 
   reg: true
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
@@ -30,6 +36,36 @@ properties:
     description:
       phandle to the peer hub on the controller.
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          1st downstream facing USB port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          2nd downstream facing USB port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          3rd downstream facing USB port
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          4th downstream facing USB port
+
+patternProperties:
+  '^.*@[1-4]$':
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+
 required:
   - peer-hub
   - compatible
@@ -50,6 +86,13 @@ examples:
             reg = <1>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_3_0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* USB 2.0 device on port 2 */
+            device@2 {
+                compatible = "usb123,4567";
+                reg = <2>;
+            };
         };
 
         /* 3.0 hub on port 2 */
@@ -58,5 +101,17 @@ examples:
             reg = <2>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_2_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* Type-A connector on port 4 */
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                      remote-endpoint = <&usb_a0_ss>;
+                    };
+                };
+            };
         };
     };
diff --git a/Bindings/usb/ti,am62-usb.yaml b/Bindings/usb/ti,am62-usb.yaml
index fec5651f56..f6e6d084d1 100644
--- a/Bindings/usb/ti,am62-usb.yaml
+++ b/Bindings/usb/ti,am62-usb.yaml
@@ -14,7 +14,10 @@ properties:
     const: ti,am62-usb
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: USB CFG register space
+      - description: USB PHY2 register space
 
   ranges: true
 
@@ -82,7 +85,8 @@ examples:
 
       usbss1: usb@f910000 {
         compatible = "ti,am62-usb";
-        reg = <0x00 0x0f910000 0x00 0x800>;
+        reg = <0x00 0x0f910000 0x00 0x800>,
+              <0x00 0x0f918000 0x00 0x400>;
         clocks = <&k3_clks 162 3>;
         clock-names = "ref";
         ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
diff --git a/Bindings/usb/ti,usb8020b.yaml b/Bindings/usb/ti,usb8020b.yaml
new file mode 100644
index 0000000000..8ef117793e
--- /dev/null
+++ b/Bindings/usb/ti,usb8020b.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI USB8020B USB 3.0 hub controller
+
+maintainers:
+  - Macpaul Lin <macpaul.lin@mediatek.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8025
+      - usb451,8027
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8027";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8025";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+    };
diff --git a/Bindings/usb/usb-nop-xceiv.yaml b/Bindings/usb/usb-nop-xceiv.yaml
index 6734f4d3aa..9b3ea23654 100644
--- a/Bindings/usb/usb-nop-xceiv.yaml
+++ b/Bindings/usb/usb-nop-xceiv.yaml
@@ -37,10 +37,11 @@ properties:
     description: Should specify the GPIO detecting a VBus insertion
     maxItems: 1
 
-  vbus-regulator:
-    description: Should specify the regulator supplying current drawn from
-      the VBus line.
-    $ref: /schemas/types.yaml#/definitions/phandle
+  vbus-supply:
+    description: regulator supplying VBUS. It will be enabled and disabled
+                 dynamically in OTG mode. If the regulator is controlled by a
+                 GPIO line, this should be modeled as a regulator-fixed and
+                 referenced by this supply.
 
   wakeup-source:
     description:
@@ -65,7 +66,7 @@ examples:
         vcc-supply = <&hsusb1_vcc_regulator>;
         reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
         vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-        vbus-regulator = <&vbus_regulator>;
+        vbus-supply = <&vbus_regulator>;
         #phy-cells = <0>;
     };
 
diff --git a/Bindings/usb/usb-switch.yaml b/Bindings/usb/usb-switch.yaml
new file mode 100644
index 0000000000..da76118e73
--- /dev/null
+++ b/Bindings/usb/usb-switch.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Orientation and Mode Switches Common Properties
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+  Common properties for devices handling USB mode and orientation switching.
+
+properties:
+  mode-switch:
+    description: Possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Possible handler of orientation switching
+    type: boolean
+
+  retimer-switch:
+    description: Possible handler of SuperSpeed signals retiming
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the device to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Super Speed (SS) Input endpoint from the Super-Speed PHY
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                $ref: /schemas/types.yaml#/definitions/uint32-array
+                minItems: 1
+                maxItems: 8
+                uniqueItems: true
+                items:
+                  maximum: 8
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: true
diff --git a/Bindings/usb/usb.yaml b/Bindings/usb/usb.yaml
index 326b14f05d..1761b7aa92 100644
--- a/Bindings/usb/usb.yaml
+++ b/Bindings/usb/usb.yaml
@@ -25,6 +25,8 @@ properties:
 
   usb-phy:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       List of all the USB PHYs on this HCD to be accepted by the legacy USB
       Physical Layer subsystem.
diff --git a/Bindings/vendor-prefixes.yaml b/Bindings/vendor-prefixes.yaml
index 1a0dc04f1d..b97d298b3e 100644
--- a/Bindings/vendor-prefixes.yaml
+++ b/Bindings/vendor-prefixes.yaml
@@ -39,6 +39,8 @@ patternProperties:
     description: ShenZhen Asia Better Technology Ltd.
   "^acbel,.*":
     description: Acbel Polytech Inc.
+  "^acelink,.*":
+    description: Acelink Technology Co., Ltd.
   "^acer,.*":
     description: Acer Inc.
   "^acme,.*":
@@ -61,6 +63,8 @@ patternProperties:
     description: Analog Devices, Inc.
   "^adieng,.*":
     description: ADI Engineering, Inc.
+  "^admatec,.*":
+    description: admatec GmbH
   "^advantech,.*":
     description: Advantech Corporation
   "^aeroflexgaisler,.*":
@@ -107,6 +111,8 @@ patternProperties:
     description: Amlogic, Inc.
   "^ampere,.*":
     description: Ampere Computing LLC
+  "^amphenol,.*":
+    description: Amphenol Advanced Sensors
   "^ampire,.*":
     description: Ampire Co., Ltd.
   "^ams,.*":
@@ -159,6 +165,8 @@ patternProperties:
     description: ASPEED Technology Inc.
   "^asrock,.*":
     description: ASRock Inc.
+  "^asteralabs,.*":
+    description: Astera Labs, Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
   "^atheros,.*":
@@ -230,6 +238,8 @@ patternProperties:
     description: ByteDance Ltd.
   "^calamp,.*":
     description: CalAmp Corp.
+  "^calao,.*":
+    description: CALAO Systems SAS
   "^calaosystems,.*":
     description: CALAO Systems SAS
   "^calxeda,.*":
@@ -478,6 +488,9 @@ patternProperties:
     description: EZchip Semiconductor
   "^facebook,.*":
     description: Facebook
+  "^fairchild,.*":
+    description: Fairchild Semiconductor (deprecated, use 'onnn')
+    deprecated: true
   "^fairphone,.*":
     description: Fairphone B.V.
   "^faraday,.*":
@@ -500,6 +513,8 @@ patternProperties:
     description: FocalTech Systems Co.,Ltd
   "^forlinx,.*":
     description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^freebox,.*":
+    description: Freebox SAS
   "^freecom,.*":
     description: Freecom Gmbh
   "^frida,.*":
@@ -542,6 +557,8 @@ patternProperties:
     description: Giantec Semiconductor, Inc.
   "^giantplus,.*":
     description: Giantplus Technology Co., Ltd.
+  "^glinet,.*":
+    description: GL Intelligence, Inc.
   "^globalscale,.*":
     description: Globalscale Technologies, Inc.
   "^globaltop,.*":
@@ -601,6 +618,8 @@ patternProperties:
     description: Honestar Technologies Co., Ltd.
   "^honeywell,.*":
     description: Honeywell
+  "^hoperf,.*":
+    description: Shenzhen Hope Microelectronics Co., Ltd.
   "^hoperun,.*":
     description: Jiangsu HopeRun Software Co., Ltd.
   "^hp,.*":
@@ -631,12 +650,16 @@ patternProperties:
     description: Hyundai Technology
   "^i2se,.*":
     description: I2SE GmbH
+  "^IBM,.*":
+    description: International Business Machines (IBM)
   "^ibm,.*":
     description: International Business Machines (IBM)
   "^icplus,.*":
     description: IC Plus Corp.
   "^idt,.*":
     description: Integrated Device Technologies, Inc.
+  "^iei,.*":
+    description: IEI Integration Corp.
   "^ifi,.*":
     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
   "^ilitek,.*":
@@ -719,6 +742,8 @@ patternProperties:
     description: JetHome (IP Sokolov P.A.)
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^jide,.*":
+    description: Jide Tech
   "^joz,.*":
     description: JOZ BV
   "^kam,.*":
@@ -821,6 +846,8 @@ patternProperties:
     description: LSI Corp. (LSI Logic)
   "^lunzn,.*":
     description: Shenzhen Lunzn Technology Co., Ltd.
+  "^luxul,.*":
+    description: Lagrand | AV
   "^lwn,.*":
     description: Liebherr-Werk Nenzing GmbH
   "^lxa,.*":
@@ -899,6 +926,9 @@ patternProperties:
     description: Miniand Tech
   "^minix,.*":
     description: MINIX Technology Ltd.
+  "^mips,.*":
+    description: MIPS Technology (deprecated, use 'mti' or 'img')
+    deprecated: true
   "^miramems,.*":
     description: MiraMEMS Sensing Technology Co., Ltd.
   "^mitsubishi,.*":
@@ -911,6 +941,8 @@ patternProperties:
     description: Miyoo
   "^mntre,.*":
     description: MNT Research GmbH
+  "^mobileye,.*":
+    description: Mobileye Vision Technologies Ltd.
   "^modtronix,.*":
     description: Modtronix Engineering
   "^moortec,.*":
@@ -993,6 +1025,9 @@ patternProperties:
     description: Novatek
   "^novtech,.*":
     description: NovTech, Inc.
+  "^numonyx,.*":
+    description: Numonyx (deprecated, use micron)
+    deprecated: true
   "^nutsboard,.*":
     description: NutsBoard
   "^nuvoton,.*":
@@ -1297,6 +1332,8 @@ patternProperties:
     description: Skyworks Solutions, Inc.
   "^smartlabs,.*":
     description: SmartLabs LLC
+  "^smartrg,.*":
+    description: SmartRG, Inc.
   "^smi,.*":
     description: Silicon Motion Technology Corporation
   "^smsc,.*":
@@ -1484,6 +1521,8 @@ patternProperties:
     description: Ufi Space Co., Ltd.
   "^ugoos,.*":
     description: Ugoos Industrial Co., Ltd.
+  "^uni-t,.*":
+    description: Uni-Trend Technology (China) Co., Ltd.
   "^uniwest,.*":
     description: United Western Technologies Corp (UniWest)
   "^upisemi,.*":
@@ -1534,10 +1573,16 @@ patternProperties:
     description: VoCore Studio
   "^voipac,.*":
     description: Voipac Technologies s.r.o.
+  "^voltafield,.*":
+    description: Voltafield Technology Corp.
   "^vot,.*":
     description: Vision Optical Technology Co., Ltd.
+  "^vscom,.*":
+    description: VS Visions Systems GmbH
   "^vxt,.*":
     description: VXT Ltd
+  "^wacom,.*":
+    description: Wacom
   "^wanchanglong,.*":
     description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^wand,.*":
diff --git a/Bindings/w1/w1-uart.yaml b/Bindings/w1/w1-uart.yaml
new file mode 100644
index 0000000000..bd7c62d780
--- /dev/null
+++ b/Bindings/w1/w1-uart.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART 1-Wire Bus
+
+maintainers:
+  - Christoph Winklhofer <cj.winklhofer@gmail.com>
+
+description: |
+  UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus
+  to create the 1-Wire timing patterns.
+
+  The UART peripheral must support full-duplex and operate in open-drain
+  mode. The timing patterns are generated by a specific combination of
+  baud-rate and transmitted byte, which corresponds to a 1-Wire read bit,
+  write bit or reset pulse.
+
+  The default baud-rate for reset and presence detection is 9600 and for
+  a 1-Wire read or write operation 115200. In case the actual baud-rate
+  is different from the requested one, the transmitted byte is adapted
+  to generate the 1-Wire timing patterns.
+
+  https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html
+
+properties:
+  compatible:
+    const: w1-uart
+
+  reset-bps:
+    default: 9600
+    description:
+      The baud rate for the 1-Wire reset and presence detect.
+
+  write-0-bps:
+    default: 115200
+    description:
+      The baud rate for the 1-Wire write-0 cycle.
+
+  write-1-bps:
+    default: 115200
+    description:
+      The baud rate for the 1-Wire write-1 and read cycle.
+
+required:
+  - compatible
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    serial {
+        onewire {
+            compatible = "w1-uart";
+        };
+    };
diff --git a/Bindings/watchdog/arm,sp805.yaml b/Bindings/watchdog/arm,sp805.yaml
index 7aea255b30..bd7c09ed19 100644
--- a/Bindings/watchdog/arm,sp805.yaml
+++ b/Bindings/watchdog/arm,sp805.yaml
@@ -50,6 +50,10 @@ properties:
       - const: wdog_clk
       - const: apb_pclk
 
+  resets:
+    maxItems: 1
+    description: WDOGRESn input reset signal for sp805 module.
+
 required:
   - compatible
   - reg
@@ -67,4 +71,5 @@ examples:
         interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&wdt_clk>, <&apb_pclk>;
         clock-names = "wdog_clk", "apb_pclk";
+        resets = <&wdt_rst>;
     };
diff --git a/Bindings/watchdog/atmel,sama5d4-wdt.yaml b/Bindings/watchdog/atmel,sama5d4-wdt.yaml
index 816f85ee2c..cdf87db361 100644
--- a/Bindings/watchdog/atmel,sama5d4-wdt.yaml
+++ b/Bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -14,10 +14,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - atmel,sama5d4-wdt
-      - microchip,sam9x60-wdt
-      - microchip,sama7g5-wdt
+    oneOf:
+      - enum:
+          - atmel,sama5d4-wdt
+          - microchip,sam9x60-wdt
+          - microchip,sama7g5-wdt
+      - items:
+          - const: microchip,sam9x7-wdt
+          - const: microchip,sam9x60-wdt
 
   reg:
     maxItems: 1
diff --git a/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt b/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt
deleted file mode 100644
index f801d71de1..0000000000
--- a/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-BCM2835 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-pm-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- timeout-sec   : Contains the watchdog timeout in seconds
-
-Example:
-
-watchdog {
-	compatible = "brcm,bcm2835-pm-wdt";
-	reg = <0x7e100000 0x28>;
-	timeout-sec = <10>;
-};
diff --git a/Bindings/watchdog/qcom-wdt.yaml b/Bindings/watchdog/qcom-wdt.yaml
index a4f35c598c..47587971fb 100644
--- a/Bindings/watchdog/qcom-wdt.yaml
+++ b/Bindings/watchdog/qcom-wdt.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer
 
 maintainers:
-  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
 
 properties:
   $nodename:
diff --git a/Bindings/watchdog/renesas,wdt.yaml b/Bindings/watchdog/renesas,wdt.yaml
index 951a7d5413..ffb17add49 100644
--- a/Bindings/watchdog/renesas,wdt.yaml
+++ b/Bindings/watchdog/renesas,wdt.yaml
@@ -71,6 +71,7 @@ properties:
               - renesas,r8a779a0-wdt     # R-Car V3U
               - renesas,r8a779f0-wdt     # R-Car S4-8
               - renesas,r8a779g0-wdt     # R-Car V4H
+              - renesas,r8a779h0-wdt     # R-Car V4M
           - const: renesas,rcar-gen4-wdt # R-Car Gen4
 
   reg:
diff --git a/Bindings/watchdog/sprd,sp9860-wdt.yaml b/Bindings/watchdog/sprd,sp9860-wdt.yaml
new file mode 100644
index 0000000000..730d9a3a3c
--- /dev/null
+++ b/Bindings/watchdog/sprd,sp9860-wdt.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/sprd,sp9860-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SP9860 watchdog timer
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: sprd,sp9860-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: enable
+      - const: rtc_enable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - timeout-sec
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        watchdog@40310000 {
+            compatible = "sprd,sp9860-wdt";
+            reg = <0 0x40310000 0 0x1000>;
+            interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&aon_gate CLK_APCPU_WDG_EB>, <&aon_gate CLK_AP_WDG_RTC_EB>;
+            clock-names = "enable", "rtc_enable";
+            timeout-sec = <12>;
+        };
+    };
+...
diff --git a/Bindings/watchdog/sprd-wdt.txt b/Bindings/watchdog/sprd-wdt.txt
deleted file mode 100644
index aeaf3e0caf..0000000000
--- a/Bindings/watchdog/sprd-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Spreadtrum SoCs Watchdog timer
-
-Required properties:
-- compatible : Should be "sprd,sp9860-wdt".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : Exactly one interrupt specifier.
-- timeout-sec : Contain the default watchdog timeout in seconds.
-- clock-names : Contain the input clock names.
-- clocks : Phandles to input clocks.
-
-Example:
-	watchdog: watchdog@40310000 {
-		compatible = "sprd,sp9860-wdt";
-		reg = <0 0x40310000 0 0x1000>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		timeout-sec = <12>;
-		clock-names = "enable", "rtc_enable";
-		clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
-	};
diff --git a/Bindings/watchdog/starfive,jh7100-wdt.yaml b/Bindings/watchdog/starfive,jh7100-wdt.yaml
index 68f3f6fd08..e21f807b0b 100644
--- a/Bindings/watchdog/starfive,jh7100-wdt.yaml
+++ b/Bindings/watchdog/starfive,jh7100-wdt.yaml
@@ -19,14 +19,16 @@ description:
   isn't cleared, the watchdog will reset the system unless the watchdog
   reset is disabled.
 
-allOf:
-  - $ref: watchdog.yaml#
-
 properties:
   compatible:
-    enum:
-      - starfive,jh7100-wdt
-      - starfive,jh7110-wdt
+    oneOf:
+      - enum:
+          - starfive,jh7100-wdt
+          - starfive,jh7110-wdt
+      - items:
+          - enum:
+              - starfive,jh8100-wdt
+          - const: starfive,jh7110-wdt
 
   reg:
     maxItems: 1
@@ -45,9 +47,8 @@ properties:
       - const: core
 
   resets:
-    items:
-      - description: APB reset
-      - description: Core reset
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -56,6 +57,27 @@ required:
   - clock-names
   - resets
 
+allOf:
+  - $ref: watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - starfive,jh8100-wdt
+    then:
+      properties:
+        resets:
+          items:
+            - description: Core reset
+    else:
+      properties:
+        resets:
+          items:
+            - description: APB reset
+            - description: Core reset
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/writing-schema.rst b/Bindings/writing-schema.rst
index 0a6cf19a14..7e71cdd1d6 100644
--- a/Bindings/writing-schema.rst
+++ b/Bindings/writing-schema.rst
@@ -31,7 +31,7 @@ $schema
   Indicates the meta-schema the schema file adheres to.
 
 title
-  A one-line description on the contents of the binding schema.
+  A one-line description of the hardware being described in the binding schema.
 
 maintainers
   A DT specific property. Contains a list of email address(es)
@@ -39,7 +39,7 @@ maintainers
 
 description
   Optional. A multi-line text block containing any detailed
-  information about this binding. It should contain things such as what the block
+  information about this hardware. It should contain things such as what the block
   or device does, standards the device conforms to, and links to datasheets for
   more information.
 
@@ -71,9 +71,31 @@ required
   A list of DT properties from the 'properties' section that
   must always be present.
 
+additionalProperties / unevaluatedProperties
+  Keywords controlling how schema will validate properties not matched by this
+  schema's 'properties' or 'patternProperties'. Each schema is supposed to
+  have exactly one of these keywords in top-level part, so either
+  additionalProperties or unevaluatedProperties. Nested nodes, so properties
+  being objects, are supposed to have one as well.
+
+  * additionalProperties: false
+      Most common case, where no additional schema is referenced or if this
+      binding allows subset of properties from other referenced schemas.
+
+  * unevaluatedProperties: false
+      Used when this binding references other schema whose all properties
+      should be allowed.
+
+  * additionalProperties: true
+      Rare case, used for schemas implementing common set of properties. Such
+      schemas are supposed to be referenced by other schemas, which then use
+      'unevaluatedProperties: false'.  Typically bus or common-part schemas.
+
 examples
-  Optional. A list of one or more DTS hunks implementing the
-  binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead.
+  Optional. A list of one or more DTS hunks implementing this binding only.
+  Example should not contain unrelated device nodes, e.g. consumer nodes in a
+  provider binding, other nodes referenced by phandle.
+  Note: YAML doesn't allow leading tabs, so spaces must be used instead.
 
 Unless noted otherwise, all properties are required.
 
diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index 51e0f60594..19ac7b36f6 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -252,8 +252,11 @@
 #define QCOM_ID_IPQ9510			521
 #define QCOM_ID_QRB4210			523
 #define QCOM_ID_QRB2210			524
+#define QCOM_ID_SM8475			530
+#define QCOM_ID_SM8475P			531
 #define QCOM_ID_SA8775P			534
 #define QCOM_ID_QRU1000			539
+#define QCOM_ID_SM8475_2		540
 #define QCOM_ID_QDU1000			545
 #define QCOM_ID_SM8650			557
 #define QCOM_ID_SM4450			568
@@ -265,6 +268,8 @@
 #define QCOM_ID_IPQ5322			593
 #define QCOM_ID_IPQ5312			594
 #define QCOM_ID_IPQ5302			595
+#define QCOM_ID_QCS8550			603
+#define QCOM_ID_QCM8550			604
 #define QCOM_ID_IPQ5300			624
 
 /*
diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h
index 712782177c..7ae96c7bd7 100644
--- a/include/dt-bindings/clock/ast2600-clock.h
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -86,6 +86,7 @@
 #define ASPEED_CLK_MAC3RCLK		69
 #define ASPEED_CLK_MAC4RCLK		70
 #define ASPEED_CLK_I3C			71
+#define ASPEED_CLK_FSI			72
 
 /* Only list resets here that are not part of a clock gate + reset pair */
 #define ASPEED_RESET_ADC		55
diff --git a/include/dt-bindings/clock/exynos850.h b/include/dt-bindings/clock/exynos850.h
index 3090e09c9a..7666241520 100644
--- a/include/dt-bindings/clock/exynos850.h
+++ b/include/dt-bindings/clock/exynos850.h
@@ -88,6 +88,18 @@
 #define CLK_MOUT_G3D_SWITCH		76
 #define CLK_GOUT_G3D_SWITCH		77
 #define CLK_DOUT_G3D_SWITCH		78
+#define CLK_MOUT_CPUCL0_DBG		79
+#define CLK_MOUT_CPUCL0_SWITCH		80
+#define CLK_GOUT_CPUCL0_DBG		81
+#define CLK_GOUT_CPUCL0_SWITCH		82
+#define CLK_DOUT_CPUCL0_DBG		83
+#define CLK_DOUT_CPUCL0_SWITCH		84
+#define CLK_MOUT_CPUCL1_DBG		85
+#define CLK_MOUT_CPUCL1_SWITCH		86
+#define CLK_GOUT_CPUCL1_DBG		87
+#define CLK_GOUT_CPUCL1_SWITCH		88
+#define CLK_DOUT_CPUCL1_DBG		89
+#define CLK_DOUT_CPUCL1_SWITCH		90
 
 /* CMU_APM */
 #define CLK_RCO_I3C_PMIC		1
@@ -195,6 +207,48 @@
 #define CLK_GOUT_CMGP_USI1_PCLK		14
 #define CLK_GOUT_SYSREG_CMGP_PCLK	15
 
+/* CMU_CPUCL0 */
+#define CLK_FOUT_CPUCL0_PLL		1
+#define CLK_MOUT_PLL_CPUCL0		2
+#define CLK_MOUT_CPUCL0_SWITCH_USER	3
+#define CLK_MOUT_CPUCL0_DBG_USER	4
+#define CLK_MOUT_CPUCL0_PLL		5
+#define CLK_DOUT_CPUCL0_CPU		6
+#define CLK_DOUT_CPUCL0_CMUREF		7
+#define CLK_DOUT_CPUCL0_PCLK		8
+#define CLK_DOUT_CLUSTER0_ACLK		9
+#define CLK_DOUT_CLUSTER0_ATCLK		10
+#define CLK_DOUT_CLUSTER0_PCLKDBG	11
+#define CLK_DOUT_CLUSTER0_PERIPHCLK	12
+#define CLK_GOUT_CLUSTER0_ATCLK		13
+#define CLK_GOUT_CLUSTER0_PCLK		14
+#define CLK_GOUT_CLUSTER0_PERIPHCLK	15
+#define CLK_GOUT_CLUSTER0_SCLK		16
+#define CLK_GOUT_CPUCL0_CMU_CPUCL0_PCLK	17
+#define CLK_GOUT_CLUSTER0_CPU		18
+#define CLK_CLUSTER0_SCLK		19
+
+/* CMU_CPUCL1 */
+#define CLK_FOUT_CPUCL1_PLL		1
+#define CLK_MOUT_PLL_CPUCL1		2
+#define CLK_MOUT_CPUCL1_SWITCH_USER	3
+#define CLK_MOUT_CPUCL1_DBG_USER	4
+#define CLK_MOUT_CPUCL1_PLL		5
+#define CLK_DOUT_CPUCL1_CPU		6
+#define CLK_DOUT_CPUCL1_CMUREF		7
+#define CLK_DOUT_CPUCL1_PCLK		8
+#define CLK_DOUT_CLUSTER1_ACLK		9
+#define CLK_DOUT_CLUSTER1_ATCLK		10
+#define CLK_DOUT_CLUSTER1_PCLKDBG	11
+#define CLK_DOUT_CLUSTER1_PERIPHCLK	12
+#define CLK_GOUT_CLUSTER1_ATCLK		13
+#define CLK_GOUT_CLUSTER1_PCLK		14
+#define CLK_GOUT_CLUSTER1_PERIPHCLK	15
+#define CLK_GOUT_CLUSTER1_SCLK		16
+#define CLK_GOUT_CPUCL1_CMU_CPUCL1_PCLK	17
+#define CLK_GOUT_CLUSTER1_CPU		18
+#define CLK_CLUSTER1_SCLK		19
+
 /* CMU_G3D */
 #define CLK_FOUT_G3D_PLL		1
 #define CLK_MOUT_G3D_PLL		2
@@ -320,6 +374,8 @@
 #define CLK_GOUT_SSS_PCLK		12
 #define CLK_GOUT_GPIO_CORE_PCLK		13
 #define CLK_GOUT_SYSREG_CORE_PCLK	14
+#define CLK_GOUT_PDMA_CORE_ACLK		15
+#define CLK_GOUT_SPDMA_CORE_ACLK	16
 
 /* CMU_DPU */
 #define CLK_MOUT_DPU_USER		1
diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h
index 21adec2238..3dac357778 100644
--- a/include/dt-bindings/clock/google,gs101.h
+++ b/include/dt-bindings/clock/google,gs101.h
@@ -389,4 +389,133 @@
 #define CLK_GOUT_MISC_WDT_CLUSTER1_PCLK			73
 #define CLK_GOUT_MISC_XIU_D_MISC_ACLK			74
 
+/* CMU_PERIC0 */
+#define CLK_MOUT_PERIC0_BUS_USER			1
+#define CLK_MOUT_PERIC0_I3C_USER			2
+#define CLK_MOUT_PERIC0_USI0_UART_USER			3
+#define CLK_MOUT_PERIC0_USI14_USI_USER			4
+#define CLK_MOUT_PERIC0_USI1_USI_USER			5
+#define CLK_MOUT_PERIC0_USI2_USI_USER			6
+#define CLK_MOUT_PERIC0_USI3_USI_USER			7
+#define CLK_MOUT_PERIC0_USI4_USI_USER			8
+#define CLK_MOUT_PERIC0_USI5_USI_USER			9
+#define CLK_MOUT_PERIC0_USI6_USI_USER			10
+#define CLK_MOUT_PERIC0_USI7_USI_USER			11
+#define CLK_MOUT_PERIC0_USI8_USI_USER			12
+#define CLK_DOUT_PERIC0_I3C				13
+#define CLK_DOUT_PERIC0_USI0_UART			14
+#define CLK_DOUT_PERIC0_USI14_USI			15
+#define CLK_DOUT_PERIC0_USI1_USI			16
+#define CLK_DOUT_PERIC0_USI2_USI			17
+#define CLK_DOUT_PERIC0_USI3_USI			18
+#define CLK_DOUT_PERIC0_USI4_USI			19
+#define CLK_DOUT_PERIC0_USI5_USI			20
+#define CLK_DOUT_PERIC0_USI6_USI			21
+#define CLK_DOUT_PERIC0_USI7_USI			22
+#define CLK_DOUT_PERIC0_USI8_USI			23
+#define CLK_GOUT_PERIC0_IP				24
+#define CLK_GOUT_PERIC0_PERIC0_CMU_PERIC0_PCLK		25
+#define CLK_GOUT_PERIC0_CLK_PERIC0_OSCCLK_CLK		26
+#define CLK_GOUT_PERIC0_D_TZPC_PERIC0_PCLK		27
+#define CLK_GOUT_PERIC0_GPC_PERIC0_PCLK			28
+#define CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK		29
+#define CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK		30
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0		31
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1		32
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_10		33
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_11		34
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_12		35
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_13		36
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_14		37
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_15		38
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2		39
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3		40
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4		41
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5		42
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6		43
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7		44
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_8		45
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_9		46
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0		47
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1		48
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_10		49
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_11		50
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_12		51
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_13		52
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_14		53
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_15		54
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2		55
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3		56
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4		57
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5		58
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6		59
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7		60
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_8		61
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_9		62
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0		63
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2		64
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0		65
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2		66
+#define CLK_GOUT_PERIC0_CLK_PERIC0_BUSP_CLK		67
+#define CLK_GOUT_PERIC0_CLK_PERIC0_I3C_CLK		68
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK	69
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI14_USI_CLK	70
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI1_USI_CLK		71
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI2_USI_CLK		72
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI3_USI_CLK		73
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI4_USI_CLK		74
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI5_USI_CLK		75
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI6_USI_CLK		76
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI7_USI_CLK		77
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK		78
+#define CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK		79
+
+/* CMU_PERIC1 */
+#define CLK_MOUT_PERIC1_BUS_USER			1
+#define CLK_MOUT_PERIC1_I3C_USER			2
+#define CLK_MOUT_PERIC1_USI0_USI_USER			3
+#define CLK_MOUT_PERIC1_USI10_USI_USER			4
+#define CLK_MOUT_PERIC1_USI11_USI_USER			5
+#define CLK_MOUT_PERIC1_USI12_USI_USER			6
+#define CLK_MOUT_PERIC1_USI13_USI_USER			7
+#define CLK_MOUT_PERIC1_USI9_USI_USER			8
+#define CLK_DOUT_PERIC1_I3C				9
+#define CLK_DOUT_PERIC1_USI0_USI			10
+#define CLK_DOUT_PERIC1_USI10_USI			11
+#define CLK_DOUT_PERIC1_USI11_USI			12
+#define CLK_DOUT_PERIC1_USI12_USI			13
+#define CLK_DOUT_PERIC1_USI13_USI			14
+#define CLK_DOUT_PERIC1_USI9_USI			15
+#define CLK_GOUT_PERIC1_IP				16
+#define CLK_GOUT_PERIC1_PCLK				17
+#define CLK_GOUT_PERIC1_CLK_PERIC1_I3C_CLK		18
+#define CLK_GOUT_PERIC1_CLK_PERIC1_OSCCLK_CLK		19
+#define CLK_GOUT_PERIC1_D_TZPC_PERIC1_PCLK		20
+#define CLK_GOUT_PERIC1_GPC_PERIC1_PCLK			21
+#define CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK		22
+#define CLK_GOUT_PERIC1_LHM_AXI_P_PERIC1_I_CLK		23
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1		24
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2		25
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3		26
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4		27
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5		28
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6		29
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_8		30
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1		31
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_15		32
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2		33
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3		34
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4		35
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5		36
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6		37
+#define CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_8		38
+#define CLK_GOUT_PERIC1_CLK_PERIC1_BUSP_CLK		39
+#define CLK_GOUT_PERIC1_CLK_PERIC1_USI0_USI_CLK		40
+#define CLK_GOUT_PERIC1_CLK_PERIC1_USI10_USI_CLK	41
+#define CLK_GOUT_PERIC1_CLK_PERIC1_USI11_USI_CLK	42
+#define CLK_GOUT_PERIC1_CLK_PERIC1_USI12_USI_CLK	43
+#define CLK_GOUT_PERIC1_CLK_PERIC1_USI13_USI_CLK	44
+#define CLK_GOUT_PERIC1_CLK_PERIC1_USI9_USI_CLK		45
+#define CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK		46
+
 #endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */
diff --git a/include/dt-bindings/clock/microchip,mpfs-clock.h b/include/dt-bindings/clock/microchip,mpfs-clock.h
index 79775a5134..b52f19a2b4 100644
--- a/include/dt-bindings/clock/microchip,mpfs-clock.h
+++ b/include/dt-bindings/clock/microchip,mpfs-clock.h
@@ -44,6 +44,11 @@
 
 #define CLK_RTCREF	33
 #define CLK_MSSPLL	34
+#define CLK_MSSPLL0	34
+#define CLK_MSSPLL1	35
+#define CLK_MSSPLL2	36
+#define CLK_MSSPLL3	37
+/* 38 is reserved for MSS PLL internals */
 
 /* Clock Conditioning Circuitry Clock IDs */
 
diff --git a/include/dt-bindings/clock/mobileye,eyeq5-clk.h b/include/dt-bindings/clock/mobileye,eyeq5-clk.h
new file mode 100644
index 0000000000..26d8930335
--- /dev/null
+++ b/include/dt-bindings/clock/mobileye,eyeq5-clk.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2024 Mobileye Vision Technologies Ltd.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_MOBILEYE_EYEQ5_CLK_H
+#define _DT_BINDINGS_CLOCK_MOBILEYE_EYEQ5_CLK_H
+
+#define EQ5C_PLL_CPU	0
+#define EQ5C_PLL_VMP	1
+#define EQ5C_PLL_PMA	2
+#define EQ5C_PLL_VDI	3
+#define EQ5C_PLL_DDR0	4
+#define EQ5C_PLL_PCI	5
+#define EQ5C_PLL_PER	6
+#define EQ5C_PLL_PMAC	7
+#define EQ5C_PLL_MPC	8
+#define EQ5C_PLL_DDR1	9
+
+#define EQ5C_DIV_OSPI	10
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8953.h b/include/dt-bindings/clock/qcom,gcc-msm8953.h
index 783162da61..13b4a62877 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8953.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8953.h
@@ -218,6 +218,10 @@
 #define GCC_USB3PHY_PHY_BCR			3
 #define GCC_USB3_PHY_BCR			4
 #define GCC_USB_30_BCR				5
+#define GCC_MDSS_BCR				6
+#define GCC_CRYPTO_BCR				7
+#define GCC_SDCC1_BCR				8
+#define GCC_SDCC2_BCR				9
 
 /* GDSCs */
 #define CPP_GDSC				0
diff --git a/include/dt-bindings/clock/qcom,gcc-sc8180x.h b/include/dt-bindings/clock/qcom,gcc-sc8180x.h
index e893415ae1..90c6e021a0 100644
--- a/include/dt-bindings/clock/qcom,gcc-sc8180x.h
+++ b/include/dt-bindings/clock/qcom,gcc-sc8180x.h
@@ -246,6 +246,8 @@
 #define GCC_PCIE_3_CLKREF_CLK					236
 #define GCC_USB3_PRIM_CLKREF_CLK				237
 #define GCC_USB3_SEC_CLKREF_CLK					238
+#define GCC_UFS_MEM_CLKREF_EN					239
+#define GCC_UFS_CARD_CLKREF_EN					240
 
 #define GCC_EMAC_BCR						0
 #define GCC_GPU_BCR						1
diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h
index dfefd5e8bf..921a33f24d 100644
--- a/include/dt-bindings/clock/qcom,gcc-sm8150.h
+++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h
@@ -239,6 +239,9 @@
 #define GCC_USB30_PRIM_BCR					26
 #define GCC_USB30_SEC_BCR					27
 #define GCC_USB_PHY_CFG_AHB2PHY_BCR				28
+#define GCC_VIDEO_AXIC_CLK_BCR					29
+#define GCC_VIDEO_AXI0_CLK_BCR					30
+#define GCC_VIDEO_AXI1_CLK_BCR					31
 
 /* GCC GDSCRs */
 #define PCIE_0_GDSC						0
diff --git a/include/dt-bindings/clock/qcom,x1e80100-camcc.h b/include/dt-bindings/clock/qcom,x1e80100-camcc.h
new file mode 100644
index 0000000000..d72fdfb06a
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1e80100-camcc.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_X1E80100_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_X1E80100_H
+
+/* CAM_CC clocks */
+#define CAM_CC_BPS_AHB_CLK					0
+#define CAM_CC_BPS_CLK						1
+#define CAM_CC_BPS_CLK_SRC					2
+#define CAM_CC_BPS_FAST_AHB_CLK					3
+#define CAM_CC_CAMNOC_AXI_NRT_CLK				4
+#define CAM_CC_CAMNOC_AXI_RT_CLK				5
+#define CAM_CC_CAMNOC_AXI_RT_CLK_SRC				6
+#define CAM_CC_CAMNOC_DCD_XO_CLK				7
+#define CAM_CC_CAMNOC_XO_CLK					8
+#define CAM_CC_CCI_0_CLK					9
+#define CAM_CC_CCI_0_CLK_SRC					10
+#define CAM_CC_CCI_1_CLK					11
+#define CAM_CC_CCI_1_CLK_SRC					12
+#define CAM_CC_CORE_AHB_CLK					13
+#define CAM_CC_CPAS_AHB_CLK					14
+#define CAM_CC_CPAS_BPS_CLK					15
+#define CAM_CC_CPAS_FAST_AHB_CLK				16
+#define CAM_CC_CPAS_IFE_0_CLK					17
+#define CAM_CC_CPAS_IFE_1_CLK					18
+#define CAM_CC_CPAS_IFE_LITE_CLK				19
+#define CAM_CC_CPAS_IPE_NPS_CLK					20
+#define CAM_CC_CPAS_SFE_0_CLK					21
+#define CAM_CC_CPHY_RX_CLK_SRC					22
+#define CAM_CC_CSI0PHYTIMER_CLK					23
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC				24
+#define CAM_CC_CSI1PHYTIMER_CLK					25
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC				26
+#define CAM_CC_CSI2PHYTIMER_CLK					27
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC				28
+#define CAM_CC_CSI3PHYTIMER_CLK					29
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC				30
+#define CAM_CC_CSI4PHYTIMER_CLK					31
+#define CAM_CC_CSI4PHYTIMER_CLK_SRC				32
+#define CAM_CC_CSI5PHYTIMER_CLK					33
+#define CAM_CC_CSI5PHYTIMER_CLK_SRC				34
+#define CAM_CC_CSID_CLK						35
+#define CAM_CC_CSID_CLK_SRC					36
+#define CAM_CC_CSID_CSIPHY_RX_CLK				37
+#define CAM_CC_CSIPHY0_CLK					38
+#define CAM_CC_CSIPHY1_CLK					39
+#define CAM_CC_CSIPHY2_CLK					40
+#define CAM_CC_CSIPHY3_CLK					41
+#define CAM_CC_CSIPHY4_CLK					42
+#define CAM_CC_CSIPHY5_CLK					43
+#define CAM_CC_FAST_AHB_CLK_SRC					44
+#define CAM_CC_GDSC_CLK						45
+#define CAM_CC_ICP_AHB_CLK					46
+#define CAM_CC_ICP_CLK						47
+#define CAM_CC_ICP_CLK_SRC					48
+#define CAM_CC_IFE_0_CLK					49
+#define CAM_CC_IFE_0_CLK_SRC					50
+#define CAM_CC_IFE_0_DSP_CLK					51
+#define CAM_CC_IFE_0_FAST_AHB_CLK				52
+#define CAM_CC_IFE_1_CLK					53
+#define CAM_CC_IFE_1_CLK_SRC					54
+#define CAM_CC_IFE_1_DSP_CLK					55
+#define CAM_CC_IFE_1_FAST_AHB_CLK				56
+#define CAM_CC_IFE_LITE_AHB_CLK					57
+#define CAM_CC_IFE_LITE_CLK					58
+#define CAM_CC_IFE_LITE_CLK_SRC					59
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK				60
+#define CAM_CC_IFE_LITE_CSID_CLK				61
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC				62
+#define CAM_CC_IPE_NPS_AHB_CLK					63
+#define CAM_CC_IPE_NPS_CLK					64
+#define CAM_CC_IPE_NPS_CLK_SRC					65
+#define CAM_CC_IPE_NPS_FAST_AHB_CLK				66
+#define CAM_CC_IPE_PPS_CLK					67
+#define CAM_CC_IPE_PPS_FAST_AHB_CLK				68
+#define CAM_CC_JPEG_CLK						69
+#define CAM_CC_JPEG_CLK_SRC					70
+#define CAM_CC_MCLK0_CLK					71
+#define CAM_CC_MCLK0_CLK_SRC					72
+#define CAM_CC_MCLK1_CLK					73
+#define CAM_CC_MCLK1_CLK_SRC					74
+#define CAM_CC_MCLK2_CLK					75
+#define CAM_CC_MCLK2_CLK_SRC					76
+#define CAM_CC_MCLK3_CLK					77
+#define CAM_CC_MCLK3_CLK_SRC					78
+#define CAM_CC_MCLK4_CLK					79
+#define CAM_CC_MCLK4_CLK_SRC					80
+#define CAM_CC_MCLK5_CLK					81
+#define CAM_CC_MCLK5_CLK_SRC					82
+#define CAM_CC_MCLK6_CLK					83
+#define CAM_CC_MCLK6_CLK_SRC					84
+#define CAM_CC_MCLK7_CLK					85
+#define CAM_CC_MCLK7_CLK_SRC					86
+#define CAM_CC_PLL0						87
+#define CAM_CC_PLL0_OUT_EVEN					88
+#define CAM_CC_PLL0_OUT_ODD					89
+#define CAM_CC_PLL1						90
+#define CAM_CC_PLL1_OUT_EVEN					91
+#define CAM_CC_PLL2						92
+#define CAM_CC_PLL3						93
+#define CAM_CC_PLL3_OUT_EVEN					94
+#define CAM_CC_PLL4						95
+#define CAM_CC_PLL4_OUT_EVEN					96
+#define CAM_CC_PLL6						97
+#define CAM_CC_PLL6_OUT_EVEN					98
+#define CAM_CC_PLL8						99
+#define CAM_CC_PLL8_OUT_EVEN					100
+#define CAM_CC_SFE_0_CLK					101
+#define CAM_CC_SFE_0_CLK_SRC					102
+#define CAM_CC_SFE_0_FAST_AHB_CLK				103
+#define CAM_CC_SLEEP_CLK					104
+#define CAM_CC_SLEEP_CLK_SRC					105
+#define CAM_CC_SLOW_AHB_CLK_SRC					106
+#define CAM_CC_XO_CLK_SRC					107
+
+/* CAM_CC power domains */
+#define CAM_CC_BPS_GDSC						0
+#define CAM_CC_IFE_0_GDSC					1
+#define CAM_CC_IFE_1_GDSC					2
+#define CAM_CC_IPE_0_GDSC					3
+#define CAM_CC_SFE_0_GDSC					4
+#define CAM_CC_TITAN_TOP_GDSC					5
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR						0
+#define CAM_CC_ICP_BCR						1
+#define CAM_CC_IFE_0_BCR					2
+#define CAM_CC_IFE_1_BCR					3
+#define CAM_CC_IPE_0_BCR					4
+#define CAM_CC_SFE_0_BCR					5
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,x1e80100-dispcc.h b/include/dt-bindings/clock/qcom,x1e80100-dispcc.h
new file mode 100644
index 0000000000..d4a83e4fd0
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1e80100-dispcc.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_DISP_CC_H
+#define _DT_BINDINGS_CLK_QCOM_X1E80100_DISP_CC_H
+
+/* DISP_CC clocks */
+#define DISP_CC_MDSS_ACCU_CLK					0
+#define DISP_CC_MDSS_AHB1_CLK					1
+#define DISP_CC_MDSS_AHB_CLK					2
+#define DISP_CC_MDSS_AHB_CLK_SRC				3
+#define DISP_CC_MDSS_BYTE0_CLK					4
+#define DISP_CC_MDSS_BYTE0_CLK_SRC				5
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC				6
+#define DISP_CC_MDSS_BYTE0_INTF_CLK				7
+#define DISP_CC_MDSS_BYTE1_CLK					8
+#define DISP_CC_MDSS_BYTE1_CLK_SRC				9
+#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC				10
+#define DISP_CC_MDSS_BYTE1_INTF_CLK				11
+#define DISP_CC_MDSS_DPTX0_AUX_CLK				12
+#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC				13
+#define DISP_CC_MDSS_DPTX0_LINK_CLK				14
+#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC				15
+#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC			16
+#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK			17
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK				18
+#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC			19
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK				20
+#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC			21
+#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK		22
+#define DISP_CC_MDSS_DPTX1_AUX_CLK				23
+#define DISP_CC_MDSS_DPTX1_AUX_CLK_SRC				24
+#define DISP_CC_MDSS_DPTX1_LINK_CLK				25
+#define DISP_CC_MDSS_DPTX1_LINK_CLK_SRC				26
+#define DISP_CC_MDSS_DPTX1_LINK_DIV_CLK_SRC			27
+#define DISP_CC_MDSS_DPTX1_LINK_INTF_CLK			28
+#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK				29
+#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC			30
+#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK				31
+#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC			32
+#define DISP_CC_MDSS_DPTX1_USB_ROUTER_LINK_INTF_CLK		33
+#define DISP_CC_MDSS_DPTX2_AUX_CLK				34
+#define DISP_CC_MDSS_DPTX2_AUX_CLK_SRC				35
+#define DISP_CC_MDSS_DPTX2_LINK_CLK				36
+#define DISP_CC_MDSS_DPTX2_LINK_CLK_SRC				37
+#define DISP_CC_MDSS_DPTX2_LINK_DIV_CLK_SRC			38
+#define DISP_CC_MDSS_DPTX2_LINK_INTF_CLK			39
+#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK				40
+#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC			41
+#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK				42
+#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC			43
+#define DISP_CC_MDSS_DPTX2_USB_ROUTER_LINK_INTF_CLK		44
+#define DISP_CC_MDSS_DPTX3_AUX_CLK				45
+#define DISP_CC_MDSS_DPTX3_AUX_CLK_SRC				46
+#define DISP_CC_MDSS_DPTX3_LINK_CLK				47
+#define DISP_CC_MDSS_DPTX3_LINK_CLK_SRC				48
+#define DISP_CC_MDSS_DPTX3_LINK_DIV_CLK_SRC			49
+#define DISP_CC_MDSS_DPTX3_LINK_INTF_CLK			50
+#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK				51
+#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC			52
+#define DISP_CC_MDSS_ESC0_CLK					53
+#define DISP_CC_MDSS_ESC0_CLK_SRC				54
+#define DISP_CC_MDSS_ESC1_CLK					55
+#define DISP_CC_MDSS_ESC1_CLK_SRC				56
+#define DISP_CC_MDSS_MDP1_CLK					57
+#define DISP_CC_MDSS_MDP_CLK					58
+#define DISP_CC_MDSS_MDP_CLK_SRC				59
+#define DISP_CC_MDSS_MDP_LUT1_CLK				60
+#define DISP_CC_MDSS_MDP_LUT_CLK				61
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK				62
+#define DISP_CC_MDSS_PCLK0_CLK					63
+#define DISP_CC_MDSS_PCLK0_CLK_SRC				64
+#define DISP_CC_MDSS_PCLK1_CLK					65
+#define DISP_CC_MDSS_PCLK1_CLK_SRC				66
+#define DISP_CC_MDSS_RSCC_AHB_CLK				67
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK				68
+#define DISP_CC_MDSS_VSYNC1_CLK					69
+#define DISP_CC_MDSS_VSYNC_CLK					70
+#define DISP_CC_MDSS_VSYNC_CLK_SRC				71
+#define DISP_CC_PLL0						72
+#define DISP_CC_PLL1						73
+#define DISP_CC_SLEEP_CLK					74
+#define DISP_CC_SLEEP_CLK_SRC					75
+#define DISP_CC_XO_CLK						76
+#define DISP_CC_XO_CLK_SRC					77
+
+/* DISP_CC resets */
+#define DISP_CC_MDSS_CORE_BCR					0
+#define DISP_CC_MDSS_CORE_INT2_BCR				1
+#define DISP_CC_MDSS_RSCC_BCR					2
+
+/* DISP_CC GDSCR */
+#define MDSS_GDSC						0
+#define MDSS_INT2_GDSC						1
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,x1e80100-gpucc.h b/include/dt-bindings/clock/qcom,x1e80100-gpucc.h
new file mode 100644
index 0000000000..61a3a8f3ac
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1e80100-gpucc.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_GPU_CC_H
+#define _DT_BINDINGS_CLK_QCOM_X1E80100_GPU_CC_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK						0
+#define GPU_CC_CB_CLK						1
+#define GPU_CC_CRC_AHB_CLK					2
+#define GPU_CC_CX_FF_CLK					3
+#define GPU_CC_CX_GMU_CLK					4
+#define GPU_CC_CXO_AON_CLK					5
+#define GPU_CC_CXO_CLK						6
+#define GPU_CC_DEMET_CLK					7
+#define GPU_CC_DEMET_DIV_CLK_SRC				8
+#define GPU_CC_FF_CLK_SRC					9
+#define GPU_CC_FREQ_MEASURE_CLK					10
+#define GPU_CC_GMU_CLK_SRC					11
+#define GPU_CC_GX_GMU_CLK					12
+#define GPU_CC_GX_VSENSE_CLK					13
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK				14
+#define GPU_CC_HUB_AON_CLK					15
+#define GPU_CC_HUB_CLK_SRC					16
+#define GPU_CC_HUB_CX_INT_CLK					17
+#define GPU_CC_MEMNOC_GFX_CLK					18
+#define GPU_CC_MND1X_0_GFX3D_CLK				19
+#define GPU_CC_MND1X_1_GFX3D_CLK				20
+#define GPU_CC_PLL0						21
+#define GPU_CC_PLL1						22
+#define GPU_CC_SLEEP_CLK					23
+#define GPU_CC_XO_CLK_SRC					24
+#define GPU_CC_XO_DIV_CLK_SRC					25
+
+/* GDSCs */
+#define GPU_CX_GDSC						0
+#define GPU_GX_GDSC						1
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,x1e80100-tcsr.h b/include/dt-bindings/clock/qcom,x1e80100-tcsr.h
new file mode 100644
index 0000000000..bae2c4654e
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,x1e80100-tcsr.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_X1E80100_TCSR_CC_H
+#define _DT_BINDINGS_CLK_QCOM_X1E80100_TCSR_CC_H
+
+/* TCSR CC clocks */
+#define TCSR_PCIE_2L_4_CLKREF_EN				0
+#define TCSR_PCIE_2L_5_CLKREF_EN				1
+#define TCSR_PCIE_8L_CLKREF_EN					2
+#define TCSR_USB3_MP0_CLKREF_EN					3
+#define TCSR_USB3_MP1_CLKREF_EN					4
+#define TCSR_USB2_1_CLKREF_EN					5
+#define TCSR_UFS_PHY_CLKREF_EN					6
+#define TCSR_USB4_1_CLKREF_EN					7
+#define TCSR_USB4_2_CLKREF_EN					8
+#define TCSR_USB2_2_CLKREF_EN					9
+#define TCSR_PCIE_4L_CLKREF_EN					10
+#define TCSR_EDP_CLKREF_EN					11
+
+#endif
diff --git a/include/dt-bindings/clock/r8a779g0-cpg-mssr.h b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
index 754c54a6eb..7850cdc62e 100644
--- a/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
+++ b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
@@ -86,5 +86,6 @@
 #define R8A779G0_CLK_CPEX		74
 #define R8A779G0_CLK_CBFUSA		75
 #define R8A779G0_CLK_R			76
+#define R8A779G0_CLK_CP			77
 
 #endif /* __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/clock/renesas,r8a779h0-cpg-mssr.h b/include/dt-bindings/clock/renesas,r8a779h0-cpg-mssr.h
new file mode 100644
index 0000000000..7ab6cfbaf9
--- /dev/null
+++ b/include/dt-bindings/clock/renesas,r8a779h0-cpg-mssr.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_R8A779H0_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_R8A779H0_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a779h0 CPG Core Clocks */
+
+#define R8A779H0_CLK_ZX			0
+#define R8A779H0_CLK_ZD			1
+#define R8A779H0_CLK_ZS			2
+#define R8A779H0_CLK_ZT			3
+#define R8A779H0_CLK_ZTR		4
+#define R8A779H0_CLK_S0D2		5
+#define R8A779H0_CLK_S0D3		6
+#define R8A779H0_CLK_S0D4		7
+#define R8A779H0_CLK_S0D1_VIO		8
+#define R8A779H0_CLK_S0D2_VIO		9
+#define R8A779H0_CLK_S0D4_VIO		10
+#define R8A779H0_CLK_S0D8_VIO		11
+#define R8A779H0_CLK_VIOBUSD1		12
+#define R8A779H0_CLK_VIOBUSD2		13
+#define R8A779H0_CLK_S0D1_VC		14
+#define R8A779H0_CLK_S0D2_VC		15
+#define R8A779H0_CLK_S0D4_VC		16
+#define R8A779H0_CLK_VCBUSD1		17
+#define R8A779H0_CLK_VCBUSD2		18
+#define R8A779H0_CLK_S0D2_MM		19
+#define R8A779H0_CLK_S0D4_MM		20
+#define R8A779H0_CLK_S0D2_U3DG		21
+#define R8A779H0_CLK_S0D4_U3DG		22
+#define R8A779H0_CLK_S0D2_RT		23
+#define R8A779H0_CLK_S0D3_RT		24
+#define R8A779H0_CLK_S0D4_RT		25
+#define R8A779H0_CLK_S0D6_RT		26
+#define R8A779H0_CLK_S0D2_PER		27
+#define R8A779H0_CLK_S0D3_PER		28
+#define R8A779H0_CLK_S0D4_PER		29
+#define R8A779H0_CLK_S0D6_PER		30
+#define R8A779H0_CLK_S0D12_PER		31
+#define R8A779H0_CLK_S0D24_PER		32
+#define R8A779H0_CLK_S0D1_HSC		33
+#define R8A779H0_CLK_S0D2_HSC		34
+#define R8A779H0_CLK_S0D4_HSC		35
+#define R8A779H0_CLK_S0D8_HSC		36
+#define R8A779H0_CLK_SVD1_IR		37
+#define R8A779H0_CLK_SVD2_IR		38
+#define R8A779H0_CLK_IMPAD1		39
+#define R8A779H0_CLK_IMPAD4		40
+#define R8A779H0_CLK_IMPB		41
+#define R8A779H0_CLK_SVD1_VIP		42
+#define R8A779H0_CLK_SVD2_VIP		43
+#define R8A779H0_CLK_CL			44
+#define R8A779H0_CLK_CL16M		45
+#define R8A779H0_CLK_CL16M_MM		46
+#define R8A779H0_CLK_CL16M_RT		47
+#define R8A779H0_CLK_CL16M_PER		48
+#define R8A779H0_CLK_CL16M_HSC		49
+#define R8A779H0_CLK_ZC0		50
+#define R8A779H0_CLK_ZC1		51
+#define R8A779H0_CLK_ZC2		52
+#define R8A779H0_CLK_ZC3		53
+#define R8A779H0_CLK_ZB3		54
+#define R8A779H0_CLK_ZB3D2		55
+#define R8A779H0_CLK_ZB3D4		56
+#define R8A779H0_CLK_ZG			57
+#define R8A779H0_CLK_SD0H		58
+#define R8A779H0_CLK_SD0		59
+#define R8A779H0_CLK_RPC		60
+#define R8A779H0_CLK_RPCD2		61
+#define R8A779H0_CLK_MSO		62
+#define R8A779H0_CLK_CANFD		63
+#define R8A779H0_CLK_CSI		64
+#define R8A779H0_CLK_FRAY		65
+#define R8A779H0_CLK_IPC		66
+#define R8A779H0_CLK_SASYNCRT		67
+#define R8A779H0_CLK_SASYNCPERD1	68
+#define R8A779H0_CLK_SASYNCPERD2	69
+#define R8A779H0_CLK_SASYNCPERD4	70
+#define R8A779H0_CLK_DSIEXT		71
+#define R8A779H0_CLK_DSIREF		72
+#define R8A779H0_CLK_ADGH		73
+#define R8A779H0_CLK_OSC		74
+#define R8A779H0_CLK_ZR0		75
+#define R8A779H0_CLK_ZR1		76
+#define R8A779H0_CLK_ZR2		77
+#define R8A779H0_CLK_RGMII		78
+#define R8A779H0_CLK_CPEX		79
+#define R8A779H0_CLK_CP			80
+#define R8A779H0_CLK_CBFUSA		81
+#define R8A779H0_CLK_R			82
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_R8A779H0_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/clock/rockchip,rk3588-cru.h b/include/dt-bindings/clock/rockchip,rk3588-cru.h
index 5790b13912..0c7d3ca2d5 100644
--- a/include/dt-bindings/clock/rockchip,rk3588-cru.h
+++ b/include/dt-bindings/clock/rockchip,rk3588-cru.h
@@ -733,8 +733,7 @@
 #define ACLK_AV1_PRE			718
 #define PCLK_AV1_PRE			719
 #define HCLK_SDIO_PRE			720
-
-#define CLK_NR_CLKS			(HCLK_SDIO_PRE + 1)
+#define PCLK_VO1GRF			721
 
 /* scmi-clocks indices */
 
diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
index 022a520e31..03edf2ccdf 100644
--- a/include/dt-bindings/input/linux-event-codes.h
+++ b/include/dt-bindings/input/linux-event-codes.h
@@ -602,6 +602,7 @@
 
 #define KEY_ALS_TOGGLE		0x230	/* Ambient light sensor */
 #define KEY_ROTATE_LOCK_TOGGLE	0x231	/* Display rotation lock */
+#define KEY_REFRESH_RATE_TOGGLE	0x232	/* Display refresh rate toggle */
 
 #define KEY_BUTTONCONFIG		0x240	/* AL Button Configuration */
 #define KEY_TASKMANAGER		0x241	/* AL Task/Project Manager */
diff --git a/include/dt-bindings/interconnect/qcom,msm8909.h b/include/dt-bindings/interconnect/qcom,msm8909.h
new file mode 100644
index 0000000000..76365d8aec
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,msm8909.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Qualcomm MSM8909 interconnect IDs
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8909_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8909_H
+
+/* BIMC fabric */
+#define MAS_APPS_PROC			0
+#define MAS_OXILI			1
+#define MAS_SNOC_BIMC_0			2
+#define MAS_SNOC_BIMC_1			3
+#define MAS_TCU_0			4
+#define MAS_TCU_1			5
+#define SLV_EBI				6
+#define SLV_BIMC_SNOC			7
+
+/* PCNOC fabric */
+#define MAS_AUDIO			0
+#define MAS_SPDM			1
+#define MAS_DEHR			2
+#define MAS_QPIC			3
+#define MAS_BLSP_1			4
+#define MAS_USB_HS			5
+#define MAS_CRYPTO			6
+#define MAS_SDCC_1			7
+#define MAS_SDCC_2			8
+#define MAS_SNOC_PCNOC			9
+#define PCNOC_M_0			10
+#define PCNOC_M_1			11
+#define PCNOC_INT_0			12
+#define PCNOC_INT_1			13
+#define PCNOC_S_0			14
+#define PCNOC_S_1			15
+#define PCNOC_S_2			16
+#define PCNOC_S_3			17
+#define PCNOC_S_4			18
+#define PCNOC_S_5			19
+#define PCNOC_S_7			20
+#define SLV_TCSR			21
+#define SLV_SDCC_1			22
+#define SLV_BLSP_1			23
+#define SLV_CRYPTO_0_CFG		24
+#define SLV_MESSAGE_RAM			25
+#define SLV_PDM				26
+#define SLV_PRNG			27
+#define SLV_USB_HS			28
+#define SLV_QPIC			29
+#define SLV_SPDM			30
+#define SLV_SDCC_2			31
+#define SLV_AUDIO			32
+#define SLV_DEHR_CFG			33
+#define SLV_SNOC_CFG			34
+#define SLV_QDSS_CFG			35
+#define SLV_USB_PHY			36
+#define SLV_CAMERA_SS_CFG		37
+#define SLV_DISP_SS_CFG			38
+#define SLV_VENUS_CFG			39
+#define SLV_TLMM			40
+#define SLV_GPU_CFG			41
+#define SLV_IMEM_CFG			42
+#define SLV_BIMC_CFG			43
+#define SLV_PMIC_ARB			44
+#define SLV_TCU				45
+#define SLV_PCNOC_SNOC			46
+
+/* SNOC fabric */
+#define MAS_QDSS_BAM			0
+#define MAS_BIMC_SNOC			1
+#define MAS_MDP				2
+#define MAS_PCNOC_SNOC			3
+#define MAS_VENUS			4
+#define MAS_VFE				5
+#define MAS_QDSS_ETR			6
+#define MM_INT_0			7
+#define MM_INT_1			8
+#define MM_INT_2			9
+#define MM_INT_BIMC			10
+#define QDSS_INT			11
+#define SNOC_INT_0			12
+#define SNOC_INT_1			13
+#define SNOC_INT_BIMC			14
+#define SLV_KPSS_AHB			15
+#define SLV_SNOC_BIMC_0			16
+#define SLV_SNOC_BIMC_1			17
+#define SLV_IMEM			18
+#define SLV_SNOC_PCNOC			19
+#define SLV_QDSS_STM			20
+#define SLV_CATS_0			21
+#define SLV_CATS_1			22
+
+#endif /* __DT_BINDINGS_INTERCONNECT_QCOM_MSM8909_H */
diff --git a/include/dt-bindings/interconnect/qcom,sm7150-rpmh.h b/include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
new file mode 100644
index 0000000000..1f610eb832
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Qualcomm SM7150 interconnect IDs
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM7150_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SM7150_H
+
+#define MASTER_A1NOC_CFG		0
+#define MASTER_QUP_0			1
+#define MASTER_TSIF			2
+#define MASTER_EMMC			3
+#define MASTER_SDCC_2			4
+#define MASTER_SDCC_4			5
+#define MASTER_UFS_MEM			6
+#define A1NOC_SNOC_SLV			7
+#define SLAVE_SERVICE_A1NOC		8
+
+#define MASTER_A2NOC_CFG		0
+#define MASTER_QDSS_BAM			1
+#define MASTER_QUP_1			2
+#define MASTER_CNOC_A2NOC		3
+#define MASTER_CRYPTO_CORE_0		4
+#define MASTER_IPA			5
+#define MASTER_PCIE			6
+#define MASTER_QDSS_ETR			7
+#define MASTER_USB3			8
+#define A2NOC_SNOC_SLV			9
+#define SLAVE_ANOC_PCIE_GEM_NOC		10
+#define SLAVE_SERVICE_A2NOC		11
+
+#define MASTER_CAMNOC_HF0_UNCOMP	0
+#define MASTER_CAMNOC_RT_UNCOMP		1
+#define MASTER_CAMNOC_SF_UNCOMP		2
+#define MASTER_CAMNOC_NRT_UNCOMP	3
+#define SLAVE_CAMNOC_UNCOMP		4
+
+#define MASTER_NPU			0
+#define SLAVE_CDSP_GEM_NOC		1
+
+#define MASTER_SPDM			0
+#define SNOC_CNOC_MAS			1
+#define MASTER_QDSS_DAP			2
+#define SLAVE_A1NOC_CFG			3
+#define SLAVE_A2NOC_CFG			4
+#define SLAVE_AHB2PHY_NORTH		5
+#define SLAVE_AHB2PHY_SOUTH		6
+#define SLAVE_AHB2PHY_WEST		7
+#define SLAVE_AOP			8
+#define SLAVE_AOSS			9
+#define SLAVE_CAMERA_CFG		10
+#define SLAVE_CAMERA_NRT_THROTTLE_CFG	11
+#define SLAVE_CAMERA_RT_THROTTLE_CFG	12
+#define SLAVE_CLK_CTL			13
+#define SLAVE_CDSP_CFG			14
+#define SLAVE_RBCPR_CX_CFG		15
+#define SLAVE_RBCPR_MX_CFG		16
+#define SLAVE_CRYPTO_0_CFG		17
+#define SLAVE_CNOC_DDRSS		18
+#define SLAVE_DISPLAY_CFG		19
+#define SLAVE_DISPLAY_THROTTLE_CFG	20
+#define SLAVE_EMMC_CFG			21
+#define SLAVE_GLM			22
+#define SLAVE_GRAPHICS_3D_CFG		23
+#define SLAVE_IMEM_CFG			24
+#define SLAVE_IPA_CFG			25
+#define SLAVE_CNOC_MNOC_CFG		26
+#define SLAVE_PCIE_CFG			27
+#define SLAVE_PDM			28
+#define SLAVE_PIMEM_CFG			29
+#define SLAVE_PRNG			30
+#define SLAVE_QDSS_CFG			31
+#define SLAVE_QUP_0			32
+#define SLAVE_QUP_1			33
+#define SLAVE_SDCC_2			34
+#define SLAVE_SDCC_4			35
+#define SLAVE_SNOC_CFG			36
+#define SLAVE_SPDM_WRAPPER		37
+#define SLAVE_TCSR			38
+#define SLAVE_TLMM_NORTH		39
+#define SLAVE_TLMM_SOUTH		40
+#define SLAVE_TLMM_WEST			41
+#define SLAVE_TSIF			42
+#define SLAVE_UFS_MEM_CFG		43
+#define SLAVE_USB3			44
+#define SLAVE_VENUS_CFG			45
+#define SLAVE_VENUS_CVP_THROTTLE_CFG	46
+#define SLAVE_VENUS_THROTTLE_CFG	47
+#define SLAVE_VSENSE_CTRL_CFG		48
+#define SLAVE_CNOC_A2NOC		49
+#define SLAVE_SERVICE_CNOC		50
+
+#define MASTER_CNOC_DC_NOC		0
+#define SLAVE_GEM_NOC_CFG		1
+#define SLAVE_LLCC_CFG			2
+
+#define MASTER_AMPSS_M0			0
+#define MASTER_SYS_TCU			1
+#define MASTER_GEM_NOC_CFG		2
+#define MASTER_COMPUTE_NOC		3
+#define MASTER_MNOC_HF_MEM_NOC		4
+#define MASTER_MNOC_SF_MEM_NOC		5
+#define MASTER_GEM_NOC_PCIE_SNOC	6
+#define MASTER_SNOC_GC_MEM_NOC		7
+#define MASTER_SNOC_SF_MEM_NOC		8
+#define MASTER_GRAPHICS_3D		9
+#define SLAVE_MSS_PROC_MS_MPU_CFG	10
+#define SLAVE_GEM_NOC_SNOC		11
+#define SLAVE_LLCC			12
+#define SLAVE_SERVICE_GEM_NOC		13
+
+
+#define MASTER_LLCC			0
+#define SLAVE_EBI_CH0			1
+
+#define MASTER_CNOC_MNOC_CFG		0
+#define MASTER_CAMNOC_HF0		1
+#define MASTER_CAMNOC_NRT		2
+#define MASTER_CAMNOC_RT		3
+#define MASTER_CAMNOC_SF		4
+#define MASTER_MDP_PORT0		5
+#define MASTER_MDP_PORT1		6
+#define MASTER_ROTATOR			7
+#define MASTER_VIDEO_P0			8
+#define MASTER_VIDEO_P1			9
+#define MASTER_VIDEO_PROC		10
+#define SLAVE_MNOC_SF_MEM_NOC		11
+#define SLAVE_MNOC_HF_MEM_NOC		12
+#define SLAVE_SERVICE_MNOC		13
+
+#define MASTER_SNOC_CFG			0
+#define A1NOC_SNOC_MAS			1
+#define A2NOC_SNOC_MAS			2
+#define MASTER_GEM_NOC_SNOC		3
+#define MASTER_PIMEM			4
+#define MASTER_GIC			5
+#define SLAVE_APPSS			6
+#define SNOC_CNOC_SLV			7
+#define SLAVE_SNOC_GEM_NOC_GC		8
+#define SLAVE_SNOC_GEM_NOC_SF		9
+#define SLAVE_OCIMEM			10
+#define SLAVE_PIMEM			11
+#define SLAVE_SERVICE_SNOC		12
+#define SLAVE_QDSS_STM			13
+#define SLAVE_TCU			14
+
+#endif
diff --git a/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h b/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
index a38c347269..7d97108811 100644
--- a/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
+++ b/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
@@ -112,11 +112,6 @@
 #define SLAVE_GEM_NOC_CNOC			12
 #define SLAVE_LLCC				13
 #define SLAVE_MEM_NOC_PCIE_SNOC			14
-#define MASTER_MNOC_HF_MEM_NOC_DISP		15
-#define MASTER_ANOC_PCIE_GEM_NOC_DISP		16
-#define SLAVE_LLCC_DISP				17
-#define MASTER_ANOC_PCIE_GEM_NOC_PCIE		18
-#define SLAVE_LLCC_PCIE				19
 
 #define MASTER_LPIAON_NOC			0
 #define SLAVE_LPASS_GEM_NOC			1
@@ -129,10 +124,6 @@
 
 #define MASTER_LLCC				0
 #define SLAVE_EBI1				1
-#define MASTER_LLCC_DISP			2
-#define SLAVE_EBI1_DISP				3
-#define MASTER_LLCC_PCIE			4
-#define SLAVE_EBI1_PCIE				5
 
 #define MASTER_AV1_ENC				0
 #define MASTER_CAMNOC_HF			1
@@ -147,8 +138,6 @@
 #define SLAVE_MNOC_HF_MEM_NOC			10
 #define SLAVE_MNOC_SF_MEM_NOC			11
 #define SLAVE_SERVICE_MNOC			12
-#define MASTER_MDP_DISP				13
-#define SLAVE_MNOC_HF_MEM_NOC_DISP		14
 
 #define MASTER_CDSP_PROC			0
 #define SLAVE_CDSP_MEM_NOC			1
@@ -156,18 +145,11 @@
 #define MASTER_PCIE_NORTH			0
 #define MASTER_PCIE_SOUTH			1
 #define SLAVE_ANOC_PCIE_GEM_NOC			2
-#define MASTER_PCIE_NORTH_PCIE			3
-#define MASTER_PCIE_SOUTH_PCIE			4
-#define SLAVE_ANOC_PCIE_GEM_NOC_PCIE		5
 
 #define MASTER_PCIE_3				0
 #define MASTER_PCIE_4				1
 #define MASTER_PCIE_5				2
 #define SLAVE_PCIE_NORTH			3
-#define MASTER_PCIE_3_PCIE			4
-#define MASTER_PCIE_4_PCIE			5
-#define MASTER_PCIE_5_PCIE			6
-#define SLAVE_PCIE_NORTH_PCIE			7
 
 #define MASTER_PCIE_0				0
 #define MASTER_PCIE_1				1
@@ -175,12 +157,6 @@
 #define MASTER_PCIE_6A				3
 #define MASTER_PCIE_6B				4
 #define SLAVE_PCIE_SOUTH			5
-#define MASTER_PCIE_0_PCIE			6
-#define MASTER_PCIE_1_PCIE			7
-#define MASTER_PCIE_2_PCIE			8
-#define MASTER_PCIE_6A_PCIE			9
-#define MASTER_PCIE_6B_PCIE			10
-#define SLAVE_PCIE_SOUTH_PCIE			11
 
 #define MASTER_A1NOC_SNOC			0
 #define MASTER_A2NOC_SNOC			1
diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index 9a0d33d027..ecea167930 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h
@@ -100,7 +100,11 @@
 #define LED_FUNCTION_TX "tx"
 #define LED_FUNCTION_USB "usb"
 #define LED_FUNCTION_WAN "wan"
+#define LED_FUNCTION_WAN_ONLINE "wan-online"
 #define LED_FUNCTION_WLAN "wlan"
+#define LED_FUNCTION_WLAN_2GHZ "wlan-2ghz"
+#define LED_FUNCTION_WLAN_5GHZ "wlan-5ghz"
+#define LED_FUNCTION_WLAN_6GHZ "wlan-6ghz"
 #define LED_FUNCTION_WPS "wps"
 
 #endif /* __DT_BINDINGS_LEDS_H */
diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h
index 8d73a9c51e..a4e4f92713 100644
--- a/include/dt-bindings/mfd/stm32f7-rcc.h
+++ b/include/dt-bindings/mfd/stm32f7-rcc.h
@@ -108,6 +108,7 @@
 #define STM32F7_RCC_APB2_SAI1		22
 #define STM32F7_RCC_APB2_SAI2		23
 #define STM32F7_RCC_APB2_LTDC		26
+#define STM32F7_RCC_APB2_DSI		27
 
 #define STM32F7_APB2_RESET(bit)	(STM32F7_RCC_APB2_##bit + (0x24 * 8))
 #define STM32F7_APB2_CLOCK(bit)	(STM32F7_RCC_APB2_##bit + 0xA0)
diff --git a/include/dt-bindings/power/amlogic,c3-pwrc.h b/include/dt-bindings/power/amlogic,c3-pwrc.h
index 1d98a25b08..61759df4b2 100644
--- a/include/dt-bindings/power/amlogic,c3-pwrc.h
+++ b/include/dt-bindings/power/amlogic,c3-pwrc.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
 /*
  * Copyright (c) 2023 Amlogic, Inc.
  * Author: hongyu chen1 <hongyu.chen1@amlogic.com>
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 7f4e2983a4..608087fb9a 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -308,6 +308,13 @@
 #define MSM8953_VDDMX		5
 #define MSM8953_VDDMX_AO	6
 
+/* MSM8974 Power Domain Indexes */
+#define MSM8974_VDDCX		0
+#define MSM8974_VDDCX_AO	1
+#define MSM8974_VDDCX_VFC	2
+#define MSM8974_VDDGFX		3
+#define MSM8974_VDDGFX_VFC	4
+
 /* MSM8976 Power Domain Indexes */
 #define MSM8976_VDDCX		0
 #define MSM8976_VDDCX_AO	1
diff --git a/include/dt-bindings/power/renesas,r8a779h0-sysc.h b/include/dt-bindings/power/renesas,r8a779h0-sysc.h
new file mode 100644
index 0000000000..f27976f523
--- /dev/null
+++ b/include/dt-bindings/power/renesas,r8a779h0-sysc.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_RENESAS_R8A779H0_SYSC_H__
+#define __DT_BINDINGS_POWER_RENESAS_R8A779H0_SYSC_H__
+
+/*
+ * These power domain indices match the Power Domain Register Numbers (PDR)
+ */
+
+#define R8A779H0_PD_A1E0D0C0		0
+#define R8A779H0_PD_A1E0D0C1		1
+#define R8A779H0_PD_A1E0D0C2		2
+#define R8A779H0_PD_A1E0D0C3		3
+#define R8A779H0_PD_A2E0D0		16
+#define R8A779H0_PD_A3CR0		21
+#define R8A779H0_PD_A3CR1		22
+#define R8A779H0_PD_A3CR2		23
+#define R8A779H0_PD_A33DGA		24
+#define R8A779H0_PD_A23DGB		25
+#define R8A779H0_PD_C4			31
+#define R8A779H0_PD_A1DSP0		33
+#define R8A779H0_PD_A2IMP01		34
+#define R8A779H0_PD_A2PSC		35
+#define R8A779H0_PD_A2CV0		36
+#define R8A779H0_PD_A2CV1		37
+#define R8A779H0_PD_A3IMR0		38
+#define R8A779H0_PD_A3IMR1		39
+#define R8A779H0_PD_A3VC		40
+#define R8A779H0_PD_A2CN0		42
+#define R8A779H0_PD_A1CN0		44
+#define R8A779H0_PD_A1DSP1		45
+#define R8A779H0_PD_A2DMA		47
+#define R8A779H0_PD_A2CV2		48
+#define R8A779H0_PD_A2CV3		49
+#define R8A779H0_PD_A3IMR2		50
+#define R8A779H0_PD_A3IMR3		51
+#define R8A779H0_PD_A3PCI		52
+#define R8A779H0_PD_A2PCIPHY		53
+#define R8A779H0_PD_A3VIP0		56
+#define R8A779H0_PD_A3VIP2		58
+#define R8A779H0_PD_A3ISP0		60
+#define R8A779H0_PD_A3DUL		62
+
+/* Always-on power area */
+#define R8A779H0_PD_ALWAYS_ON		64
+
+#endif /* __DT_BINDINGS_POWER_RENESAS_R8A779H0_SYSC_H__ */
diff --git a/include/dt-bindings/reset/mediatek,mt7988-resets.h b/include/dt-bindings/reset/mediatek,mt7988-resets.h
index 4933019713..0eb152889a 100644
--- a/include/dt-bindings/reset/mediatek,mt7988-resets.h
+++ b/include/dt-bindings/reset/mediatek,mt7988-resets.h
@@ -10,4 +10,10 @@
 /* ETHWARP resets */
 #define MT7988_ETHWARP_RST_SWITCH		0
 
+/* INFRA resets */
+#define MT7988_INFRA_RST0_PEXTP_MAC_SWRST	0
+#define MT7988_INFRA_RST1_THERM_CTRL_SWRST	1
+
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7988 */
+
diff --git a/include/dt-bindings/reset/qcom,x1e80100-gpucc.h b/include/dt-bindings/reset/qcom,x1e80100-gpucc.h
new file mode 100644
index 0000000000..32b43e71a1
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,x1e80100-gpucc.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_QCOM_X1E80100_GPU_CC_H
+#define _DT_BINDINGS_RESET_QCOM_X1E80100_GPU_CC_H
+
+#define GPUCC_GPU_CC_ACD_BCR					0
+#define GPUCC_GPU_CC_CB_BCR					1
+#define GPUCC_GPU_CC_CX_BCR					2
+#define GPUCC_GPU_CC_FAST_HUB_BCR				3
+#define GPUCC_GPU_CC_FF_BCR					4
+#define GPUCC_GPU_CC_GFX3D_AON_BCR				5
+#define GPUCC_GPU_CC_GMU_BCR					6
+#define GPUCC_GPU_CC_GX_BCR					7
+#define GPUCC_GPU_CC_XO_BCR					8
+
+#endif
diff --git a/include/dt-bindings/reset/sophgo,sg2042-reset.h b/include/dt-bindings/reset/sophgo,sg2042-reset.h
new file mode 100644
index 0000000000..9ab0980625
--- /dev/null
+++ b/include/dt-bindings/reset/sophgo,sg2042-reset.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_RESET_SOPHGO_SG2042_H_
+#define __DT_BINDINGS_RESET_SOPHGO_SG2042_H_
+
+#define RST_MAIN_AP			0
+#define RST_RISCV_CPU			1
+#define RST_RISCV_LOW_SPEED_LOGIC	2
+#define RST_RISCV_CMN			3
+#define RST_HSDMA			4
+#define RST_SYSDMA			5
+#define RST_EFUSE0			6
+#define RST_EFUSE1			7
+#define RST_RTC				8
+#define RST_TIMER			9
+#define RST_WDT				10
+#define RST_AHB_ROM0			11
+#define RST_AHB_ROM1			12
+#define RST_I2C0			13
+#define RST_I2C1			14
+#define RST_I2C2			15
+#define RST_I2C3			16
+#define RST_GPIO0			17
+#define RST_GPIO1			18
+#define RST_GPIO2			19
+#define RST_PWM				20
+#define RST_AXI_SRAM0			21
+#define RST_AXI_SRAM1			22
+#define RST_SF0				23
+#define RST_SF1				24
+#define RST_LPC				25
+#define RST_ETH0			26
+#define RST_EMMC			27
+#define RST_SD				28
+#define RST_UART0			29
+#define RST_UART1			30
+#define RST_UART2			31
+#define RST_UART3			32
+#define RST_SPI0			33
+#define RST_SPI1			34
+#define RST_DBG_I2C			35
+#define RST_PCIE0			36
+#define RST_PCIE1			37
+#define RST_DDR0			38
+#define RST_DDR1			39
+#define RST_DDR2			40
+#define RST_DDR3			41
+#define RST_FAU0			42
+#define RST_FAU1			43
+#define RST_FAU2			44
+#define RST_RXU0			45
+#define RST_RXU1			46
+#define RST_RXU2			47
+#define RST_RXU3			48
+#define RST_RXU4			49
+#define RST_RXU5			50
+#define RST_RXU6			51
+#define RST_RXU7			52
+#define RST_RXU8			53
+#define RST_RXU9			54
+#define RST_RXU10			55
+#define RST_RXU11			56
+#define RST_RXU12			57
+#define RST_RXU13			58
+#define RST_RXU14			59
+#define RST_RXU15			60
+#define RST_RXU16			61
+#define RST_RXU17			62
+#define RST_RXU18			63
+#define RST_RXU19			64
+#define RST_RXU20			65
+#define RST_RXU21			66
+#define RST_RXU22			67
+#define RST_RXU23			68
+#define RST_RXU24			69
+#define RST_RXU25			70
+#define RST_RXU26			71
+#define RST_RXU27			72
+#define RST_RXU28			73
+#define RST_RXU29			74
+#define RST_RXU30			75
+#define RST_RXU31			76
+
+#endif /* __DT_BINDINGS_RESET_SOPHGO_SG2042_H_ */
diff --git a/src/arc/axc003.dtsi b/src/arc/axc003.dtsi
index 3434c8131e..c0a812674c 100644
--- a/src/arc/axc003.dtsi
+++ b/src/arc/axc003.dtsi
@@ -119,9 +119,9 @@
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
-	 * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+	 * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c)
 	 *
-	 * So here we mimic a direct connection betwen them, ignoring the
+	 * So here we mimic a direct connection between them, ignoring the
 	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
 	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
 	 *
diff --git a/src/arc/hsdk.dts b/src/arc/hsdk.dts
index 6691f42550..41b980df86 100644
--- a/src/arc/hsdk.dts
+++ b/src/arc/hsdk.dts
@@ -205,7 +205,6 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
diff --git a/src/arc/vdk_axs10x_mb.dtsi b/src/arc/vdk_axs10x_mb.dtsi
index 90a412026e..0e0e2d337b 100644
--- a/src/arc/vdk_axs10x_mb.dtsi
+++ b/src/arc/vdk_axs10x_mb.dtsi
@@ -113,7 +113,7 @@
 	/*
 	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
 	 *
-	 * This node is intentionally put outside of MB above becase
+	 * This node is intentionally put outside of MB above because
 	 * it maps areas outside of MB's 0xez-0xfz.
 	 */
 	uio_ev: uio@d0000000 {
diff --git a/src/arm/allwinner/sun8i-r40-feta40i.dtsi b/src/arm/allwinner/sun8i-r40-feta40i.dtsi
index 9f39b5a2bb..c12361d031 100644
--- a/src/arm/allwinner/sun8i-r40-feta40i.dtsi
+++ b/src/arm/allwinner/sun8i-r40-feta40i.dtsi
@@ -42,6 +42,13 @@
 	vcc-pg-supply = <&reg_dldo1>;
 };
 
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
diff --git a/src/arm/amlogic/meson.dtsi b/src/arm/amlogic/meson.dtsi
index 8e3860d5d9..8cb0fc78b2 100644
--- a/src/arm/amlogic/meson.dtsi
+++ b/src/arm/amlogic/meson.dtsi
@@ -23,7 +23,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		cbus: cbus@c1100000 {
+		cbus: bus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0xc1100000 0x200000>;
 			#address-cells = <1>;
@@ -206,7 +206,7 @@
 			};
 		};
 
-		aobus: aobus@c8100000 {
+		aobus: bus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0xc8100000 0x100000>;
 			#address-cells = <1>;
@@ -302,7 +302,7 @@
 			reg = <0xd9040000 0x10000>;
 		};
 
-		secbus: secbus@da000000 {
+		secbus: bus@da000000 {
 			compatible = "simple-bus";
 			reg = <0xda000000 0x6000>;
 			#address-cells = <1>;
diff --git a/src/arm/amlogic/meson8.dtsi b/src/arm/amlogic/meson8.dtsi
index 59932fbfd5..f57be9ae15 100644
--- a/src/arm/amlogic/meson8.dtsi
+++ b/src/arm/amlogic/meson8.dtsi
@@ -645,7 +645,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
diff --git a/src/arm/amlogic/meson8b.dtsi b/src/arm/amlogic/meson8b.dtsi
index 5198f5177c..2d9d24d3a9 100644
--- a/src/arm/amlogic/meson8b.dtsi
+++ b/src/arm/amlogic/meson8b.dtsi
@@ -620,7 +620,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
diff --git a/src/arm/arm/arm-realview-pb1176.dts b/src/arm/arm/arm-realview-pb1176.dts
index efed325af8..d99bac0223 100644
--- a/src/arm/arm/arm-realview-pb1176.dts
+++ b/src/arm/arm/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git a/src/arm/arm/integratorap-im-pd1.dts b/src/arm/arm/integratorap-im-pd1.dts
index 7072a70da0..367850ea09 100644
--- a/src/arm/arm/integratorap-im-pd1.dts
+++ b/src/arm/arm/integratorap-im-pd1.dts
@@ -129,8 +129,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -154,6 +152,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J30";
 
 		port {
 			vga_con_in: endpoint {
diff --git a/src/arm/arm/versatile-ab.dts b/src/arm/arm/versatile-ab.dts
index f31dcf7e58..de45aa99e2 100644
--- a/src/arm/arm/versatile-ab.dts
+++ b/src/arm/arm/versatile-ab.dts
@@ -32,8 +32,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -59,6 +57,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J1";
 
 		port {
 			vga_con_in: endpoint {
diff --git a/src/arm/arm/vexpress-v2p-ca9.dts b/src/arm/arm/vexpress-v2p-ca9.dts
index 5916e4877e..8bf3566641 100644
--- a/src/arm/arm/vexpress-v2p-ca9.dts
+++ b/src/arm/arm/vexpress-v2p-ca9.dts
@@ -20,7 +20,9 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	chosen { };
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
diff --git a/src/arm/broadcom/bcm47622.dtsi b/src/arm/broadcom/bcm47622.dtsi
index 7cd38de118..485863f9c4 100644
--- a/src/arm/broadcom/bcm47622.dtsi
+++ b/src/arm/broadcom/bcm47622.dtsi
@@ -138,6 +138,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm/broadcom/bcm63138.dtsi b/src/arm/broadcom/bcm63138.dtsi
index 4ef0228361..e74ba6bf37 100644
--- a/src/arm/broadcom/bcm63138.dtsi
+++ b/src/arm/broadcom/bcm63138.dtsi
@@ -229,7 +229,12 @@
 			reg-names = "nand", "nand-int-base";
 			status = "disabled";
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
+			interrupt-names = "nand_ctlrdy";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
 		};
 
 		serial@4400 {
diff --git a/src/arm/broadcom/bcm63148.dtsi b/src/arm/broadcom/bcm63148.dtsi
index 24431de181..53703827ee 100644
--- a/src/arm/broadcom/bcm63148.dtsi
+++ b/src/arm/broadcom/bcm63148.dtsi
@@ -119,5 +119,19 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };
diff --git a/src/arm/broadcom/bcm63178.dtsi b/src/arm/broadcom/bcm63178.dtsi
index 3f9aed96ba..6d8d334989 100644
--- a/src/arm/broadcom/bcm63178.dtsi
+++ b/src/arm/broadcom/bcm63178.dtsi
@@ -129,6 +129,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm/broadcom/bcm6756.dtsi b/src/arm/broadcom/bcm6756.dtsi
index 1d8d957d65..6433f8fa5e 100644
--- a/src/arm/broadcom/bcm6756.dtsi
+++ b/src/arm/broadcom/bcm6756.dtsi
@@ -139,6 +139,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm/broadcom/bcm6846.dtsi b/src/arm/broadcom/bcm6846.dtsi
index cf92cf8c46..ee361cb00b 100644
--- a/src/arm/broadcom/bcm6846.dtsi
+++ b/src/arm/broadcom/bcm6846.dtsi
@@ -119,5 +119,19 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };
diff --git a/src/arm/broadcom/bcm6855.dtsi b/src/arm/broadcom/bcm6855.dtsi
index 52d6bc89f9..52915ec6f3 100644
--- a/src/arm/broadcom/bcm6855.dtsi
+++ b/src/arm/broadcom/bcm6855.dtsi
@@ -129,6 +129,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm/broadcom/bcm6878.dtsi b/src/arm/broadcom/bcm6878.dtsi
index 2c5d706bac..70cf23a65f 100644
--- a/src/arm/broadcom/bcm6878.dtsi
+++ b/src/arm/broadcom/bcm6878.dtsi
@@ -120,6 +120,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm/broadcom/bcm947622.dts b/src/arm/broadcom/bcm947622.dts
index 93b8ce2267..6241485408 100644
--- a/src/arm/broadcom/bcm947622.dts
+++ b/src/arm/broadcom/bcm947622.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm963138.dts b/src/arm/broadcom/bcm963138.dts
index 1b405c2492..7fd87e05ec 100644
--- a/src/arm/broadcom/bcm963138.dts
+++ b/src/arm/broadcom/bcm963138.dts
@@ -29,3 +29,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm963138dvt.dts b/src/arm/broadcom/bcm963138dvt.dts
index b5af61853a..f60d09908a 100644
--- a/src/arm/broadcom/bcm963138dvt.dts
+++ b/src/arm/broadcom/bcm963138dvt.dts
@@ -32,15 +32,15 @@
 };
 
 &nand_controller {
+	brcm,wp-not-connected;
 	status = "okay";
+};
 
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		brcm,nand-oob-sectors-size = <16>;
-	};
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	brcm,nand-oob-sector-size = <16>;
+	nand-on-flash-bbt;
 };
 
 &ahci {
diff --git a/src/arm/broadcom/bcm963148.dts b/src/arm/broadcom/bcm963148.dts
index 1f5d6d783f..44bca063a3 100644
--- a/src/arm/broadcom/bcm963148.dts
+++ b/src/arm/broadcom/bcm963148.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm963178.dts b/src/arm/broadcom/bcm963178.dts
index d036e99dd8..098a222cd7 100644
--- a/src/arm/broadcom/bcm963178.dts
+++ b/src/arm/broadcom/bcm963178.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm96756.dts b/src/arm/broadcom/bcm96756.dts
index 8b104f3fb1..402038d3cd 100644
--- a/src/arm/broadcom/bcm96756.dts
+++ b/src/arm/broadcom/bcm96756.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm96846.dts b/src/arm/broadcom/bcm96846.dts
index 55852c2296..943896afb7 100644
--- a/src/arm/broadcom/bcm96846.dts
+++ b/src/arm/broadcom/bcm96846.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm96855.dts b/src/arm/broadcom/bcm96855.dts
index 2ad880af21..571663d9a1 100644
--- a/src/arm/broadcom/bcm96855.dts
+++ b/src/arm/broadcom/bcm96855.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/broadcom/bcm96878.dts b/src/arm/broadcom/bcm96878.dts
index b7af8ade7a..8d6eddd54c 100644
--- a/src/arm/broadcom/bcm96878.dts
+++ b/src/arm/broadcom/bcm96878.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm/gemini/gemini-dlink-dir-685.dts b/src/arm/gemini/gemini-dlink-dir-685.dts
index 3961496642..b4dbcf8f16 100644
--- a/src/arm/gemini/gemini-dlink-dir-685.dts
+++ b/src/arm/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
@@ -187,7 +187,7 @@
 	};
 
 	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
-	switch {
+	ethernet-switch {
 		compatible = "realtek,rtl8366rb";
 		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
 		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -204,36 +204,36 @@
 			#interrupt-cells = <1>;
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 				phy-handle = <&phy0>;
 			};
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 				phy-handle = <&phy1>;
 			};
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 				phy-handle = <&phy2>;
 			};
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 				phy-handle = <&phy3>;
 			};
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 				phy-handle = <&phy4>;
 			};
-			rtl8366rb_cpu_port: port@5 {
+			rtl8366rb_cpu_port: ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&gmac0>;
@@ -252,27 +252,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy0: phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <0>;
 			};
-			phy1: phy@1 {
+			phy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <1>;
 			};
-			phy2: phy@2 {
+			phy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <2>;
 			};
-			phy3: phy@3 {
+			phy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <3>;
 			};
-			phy4: phy@4 {
+			phy4: ethernet-phy@4 {
 				reg = <4>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <12>;
diff --git a/src/arm/gemini/gemini-dlink-dns-313.dts b/src/arm/gemini/gemini-dlink-dns-313.dts
index 138c47e1ac..8c54d3a5a7 100644
--- a/src/arm/gemini/gemini-dlink-dns-313.dts
+++ b/src/arm/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 		};
diff --git a/src/arm/gemini/gemini-sl93512r.dts b/src/arm/gemini/gemini-sl93512r.dts
index 91c19e8ebf..4992ec276d 100644
--- a/src/arm/gemini/gemini-sl93512r.dts
+++ b/src/arm/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@
 		button-setup {
 			debounce-interval = <50>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -93,7 +93,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7385";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -101,27 +101,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
diff --git a/src/arm/gemini/gemini-sq201.dts b/src/arm/gemini/gemini-sq201.dts
index d0efd76695..f8c6f6e5cd 100644
--- a/src/arm/gemini/gemini-sq201.dts
+++ b/src/arm/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@
 		button-setup {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -78,7 +78,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7395";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -86,27 +86,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
diff --git a/src/arm/gemini/gemini-wbd111.dts b/src/arm/gemini/gemini-wbd111.dts
index 3c88c59ab4..6a0c89e0c9 100644
--- a/src/arm/gemini/gemini-wbd111.dts
+++ b/src/arm/gemini/gemini-wbd111.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
+	compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -28,10 +28,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/gemini/gemini-wbd222.dts b/src/arm/gemini/gemini-wbd222.dts
index ff72bbc4db..d8b34ebad4 100644
--- a/src/arm/gemini/gemini-wbd222.dts
+++ b/src/arm/gemini/gemini-wbd222.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
+	compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
diff --git a/src/arm/marvell/armada-385-clearfog-gtr-l8.dts b/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
index 1707d1b015..cb85f8e31d 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/src/arm/marvell/armada-385-clearfog-gtr-l8.dts
@@ -4,6 +4,18 @@
 
 / {
 	model = "SolidRun Clearfog GTR L8";
+	compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385",
+		     "marvell,armada380";
+
+	/* CON25 */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &mdio {
@@ -20,57 +32,65 @@
 
 			ethernet-port@1 {
 				reg = <1>;
-				label = "lan8";
+				label = "lan1";
 				phy-handle = <&switch0phy0>;
 			};
 
 			ethernet-port@2 {
 				reg = <2>;
-				label = "lan7";
+				label = "lan2";
 				phy-handle = <&switch0phy1>;
 			};
 
 			ethernet-port@3 {
 				reg = <3>;
-				label = "lan6";
+				label = "lan3";
 				phy-handle = <&switch0phy2>;
 			};
 
 			ethernet-port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan4";
 				phy-handle = <&switch0phy3>;
 			};
 
 			ethernet-port@5 {
 				reg = <5>;
-				label = "lan4";
+				label = "lan5";
 				phy-handle = <&switch0phy4>;
 			};
 
 			ethernet-port@6 {
 				reg = <6>;
-				label = "lan3";
+				label = "lan6";
 				phy-handle = <&switch0phy5>;
 			};
 
 			ethernet-port@7 {
 				reg = <7>;
-				label = "lan2";
+				label = "lan7";
 				phy-handle = <&switch0phy6>;
 			};
 
 			ethernet-port@8 {
 				reg = <8>;
-				label = "lan1";
+				label = "lan8";
 				phy-handle = <&switch0phy7>;
 			};
 
+			ethernet-port@9 {
+				reg = <9>;
+				label = "lan-sfp";
+				phy-mode = "sgmii";
+				sfp = <&sfp1>;
+				managed = "in-band-status";
+			};
+
 			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
-
 				ethernet = <&eth1>;
+
 				fixed-link {
 					speed = <2500>;
 					full-duplex;
diff --git a/src/arm/marvell/armada-385-clearfog-gtr-s4.dts b/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
index a7678a784c..5f83d98144 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/src/arm/marvell/armada-385-clearfog-gtr-s4.dts
@@ -4,6 +4,8 @@
 
 / {
 	model = "SolidRun Clearfog GTR S4";
+	compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
+		     "marvell,armada380";
 };
 
 &sfp0 {
diff --git a/src/arm/marvell/armada-385-clearfog-gtr.dtsi b/src/arm/marvell/armada-385-clearfog-gtr.dtsi
index d1452a04e9..f3a3cb6ac3 100644
--- a/src/arm/marvell/armada-385-clearfog-gtr.dtsi
+++ b/src/arm/marvell/armada-385-clearfog-gtr.dtsi
@@ -141,18 +141,13 @@
 			};
 
 			pinctrl@18000 {
-				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
-					marvell,pins = "mpp22";
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
-					marvell,pins = "mpp23";
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
 					marvell,function = "gpio";
 				};
 
@@ -162,6 +157,37 @@
 					marvell,function = "i2c1";
 				};
 
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_led_pins: led-pins {
+					marvell,pins = "mpp42", "mpp52";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_lte_disable_pins: lte-disable-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_pci_pins: pci-pins {
+					// pci reset
+					marvell,pins = "mpp33", "mpp35", "mpp44";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+
 				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
 					marvell,pins = "mpp21", "mpp28",
 						       "mpp37", "mpp38",
@@ -169,13 +195,15 @@
 					marvell,function = "sd0";
 				};
 
-				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
-					marvell,pins = "mpp47";
+				cf_gtr_sfp0_pins: sfp0-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp25", "mpp46";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
-					marvell,pins = "mpp48";
+				cf_gtr_sfp1_pins: sfp1-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp24", "mpp54";
 					marvell,function = "gpio";
 				};
 
@@ -184,13 +212,18 @@
 					marvell,function = "spi1";
 				};
 
-				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
-					marvell,pins = "mpp53";
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
-					marvell,pins = "mpp36";
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_wifi_disable_pins: wifi-disable-pins {
+					marvell,pins = "mpp30", "mpp31";
 					marvell,function = "gpio";
 				};
 			};
@@ -221,21 +254,26 @@
 		};
 
 		pcie {
+			pinctrl-0 = <&cf_gtr_pci_pins>;
+			pinctrl-names = "default";
 			status = "okay";
 			/*
 			 * The PCIe units are accessible through
 			 * the mini-PCIe connectors on the board.
 			 */
+			/* CON3 - serdes 0 */
 			pcie@1,0 {
 				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON4 - serdes 2 */
 			pcie@2,0 {
 				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON2 - serdes 4 */
 			pcie@3,0 {
 				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 				status = "okay";
@@ -243,10 +281,12 @@
 		};
 	};
 
-	sfp0: sfp {
+	/* CON5 */
+	sfp0: sfp-0 {
 		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp0_pins>;
+		pinctrl-names = "default";
 		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 	};
@@ -273,6 +313,8 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&cf_gtr_led_pins>;
+		pinctrl-names = "default";
 
 		led1 {
 			function = LED_FUNCTION_CPU;
@@ -408,7 +450,7 @@
 };
 
 &gpio0 {
-	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
 	pinctrl-names = "default";
 
 	wifi-disable {
@@ -420,7 +462,7 @@
 };
 
 &gpio1 {
-	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
 	pinctrl-names = "default";
 
 	lte-disable {
diff --git a/src/arm/marvell/armada-388-clearfog.dts b/src/arm/marvell/armada-388-clearfog.dts
index 3290ccad23..09bf2e6d4e 100644
--- a/src/arm/marvell/armada-388-clearfog.dts
+++ b/src/arm/marvell/armada-388-clearfog.dts
@@ -10,8 +10,9 @@
 
 / {
 	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
+	compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1",
+		     "marvell,armada388", "marvell,armada385",
+		     "marvell,armada380";
 
 	soc {
 		internal-regs {
diff --git a/src/arm/marvell/dove-cubox.dts b/src/arm/marvell/dove-cubox.dts
index bfde99486a..bcaaf8320c 100644
--- a/src/arm/marvell/dove-cubox.dts
+++ b/src/arm/marvell/dove-cubox.dts
@@ -101,7 +101,7 @@
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
 
-		clkout0 {
+		clkout@0 {
 			reg = <0>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <0>;
@@ -109,7 +109,7 @@
 			silabs,pll-master;
 		};
 
-		clkout2 {
+		clkout@2 {
 			reg = <2>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
diff --git a/src/arm/marvell/mmp2-brownstone.dts b/src/arm/marvell/mmp2-brownstone.dts
index 04f1ae1382..bc64348b82 100644
--- a/src/arm/marvell/mmp2-brownstone.dts
+++ b/src/arm/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git a/src/arm/microchip/at91-sama7g54_curiosity.dts b/src/arm/microchip/at91-sama7g54_curiosity.dts
new file mode 100644
index 0000000000..009d2c8324
--- /dev/null
+++ b/src/arm/microchip/at91-sama7g54_curiosity.dts
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama7g54_curiosity.dts - Device Tree file for SAMA7G54 Curiosity Board
+ *
+ * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7G54 Curiosity";
+	compatible = "microchip,sama7g54-curiosity", "microchip,sama7g5", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart3;
+		i2c0 = &i2c10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "user-button";
+			gpios = <&pioA PIN_PD19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_BOOT;
+			gpios = <&pioA PIN_PD14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&pioA PIN_PB15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand_default>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "nand: at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "nand: u-boot";
+					reg = <0x40000 0x100000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "nand: u-boot env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "nand: device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "nand: kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "nand: rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c10: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx10_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <256>;
+			vcc-supply = <&vdd_3v3>;
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <3300000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+	};
+};
+
+&pioA {
+	pinctrl_flx3_default: flx3-default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx10_default: flx10-default {
+		pinmux = <PIN_PC30__FLEXCOM10_IO0>,
+			 <PIN_PC31__FLEXCOM10_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PD19__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PD13__GPIO>,
+			 <PIN_PD14__GPIO>,
+			 <PIN_PB15__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1-an-default {
+		pinmux = <PIN_PC15__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2-an-default {
+		pinmux = <PIN_PC13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_nand_default: nand-default {
+		pinmux = <PIN_PD9__D0>,
+			 <PIN_PD10__D1>,
+			 <PIN_PD11__D2>,
+			 <PIN_PC21__D3>,
+			 <PIN_PC22__D4>,
+			 <PIN_PC23__D5>,
+			 <PIN_PC24__D6>,
+			 <PIN_PD2__D7>,
+			 <PIN_PD3__NANDRDY>,
+			 <PIN_PD4__NCS3_NANDCS>,
+			 <PIN_PD5__NWE_NWR0_NANDWE>,
+			 <PIN_PD6__NRD_NANDOE>,
+			 <PIN_PD7__A21_NANDALE>,
+			 <PIN_PD8__A22_NANDCLE>;
+		bias-disable;
+		slew-rate = <0>;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB22__QSPI1_IO3>,
+			 <PIN_PB23__QSPI1_IO2>,
+			 <PIN_PB24__QSPI1_IO1>,
+			 <PIN_PB25__QSPI1_IO0>,
+			 <PIN_PB26__QSPI1_CS>,
+			 <PIN_PB27__QSPI1_SCK>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>,
+			 <PIN_PC4__SDMMC1_CD>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+/* M.2 slot for wireless card */
+&sdmmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+/* micro SD socket */
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-sama7g5ek.dts b/src/arm/microchip/at91-sama7g5ek.dts
index 217e9b96c6..20b2497657 100644
--- a/src/arm/microchip/at91-sama7g5ek.dts
+++ b/src/arm/microchip/at91-sama7g5ek.dts
@@ -293,7 +293,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1150000>;
+						regulator-suspend-microvolt = <1150000>;
 						regulator-mode = <4>;
 					};
 
@@ -314,7 +314,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
-						regulator-suspend-voltage = <1050000>;
+						regulator-suspend-microvolt = <1050000>;
 						regulator-mode = <4>;
 					};
 
@@ -331,7 +331,7 @@
 					regulator-always-on;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -346,7 +346,7 @@
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
-						regulator-suspend-voltage = <1800000>;
+						regulator-suspend-microvolt = <1800000>;
 						regulator-on-in-suspend;
 					};
 
diff --git a/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts b/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts
index 92f2c05c87..af70eb8a3a 100644
--- a/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts
+++ b/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -121,6 +121,8 @@
 };
 
 &usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 
 	pinctrl-0 = <&pinctrl_usart3
diff --git a/src/arm/microchip/at91sam9x5ek.dtsi b/src/arm/microchip/at91sam9x5ek.dtsi
index 5f4eaa618a..9618b8d965 100644
--- a/src/arm/microchip/at91sam9x5ek.dtsi
+++ b/src/arm/microchip/at91sam9x5ek.dtsi
@@ -39,6 +39,8 @@
 };
 
 &dbgu {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };
 
diff --git a/src/arm/microchip/sam9x60.dtsi b/src/arm/microchip/sam9x60.dtsi
index 73d570a172..291540e5d8 100644
--- a/src/arm/microchip/sam9x60.dtsi
+++ b/src/arm/microchip/sam9x60.dtsi
@@ -179,7 +179,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -202,7 +202,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -220,7 +220,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -248,7 +248,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -271,7 +271,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -289,7 +289,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -377,7 +377,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(22))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(23))>;
@@ -399,7 +399,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(22))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(23))>;
@@ -426,7 +426,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(24))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(25))>;
@@ -448,7 +448,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(24))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(25))>;
@@ -583,7 +583,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(13))>;
@@ -605,7 +605,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(13))>;
@@ -632,7 +632,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(15))>;
@@ -654,7 +654,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(15))>;
@@ -681,7 +681,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(17))>;
@@ -703,7 +703,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(17))>;
@@ -730,7 +730,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -753,7 +753,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -771,7 +771,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -798,7 +798,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -821,7 +821,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -839,7 +839,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -866,7 +866,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -889,7 +889,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -907,7 +907,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -934,7 +934,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -957,7 +957,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -975,7 +975,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -1057,7 +1057,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(19))>;
@@ -1079,7 +1079,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(19))>;
@@ -1106,7 +1106,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(21))>;
@@ -1128,7 +1128,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(21))>;
diff --git a/src/arm/microchip/sama7g5.dtsi b/src/arm/microchip/sama7g5.dtsi
index 269e0a3ca2..75778be126 100644
--- a/src/arm/microchip/sama7g5.dtsi
+++ b/src/arm/microchip/sama7g5.dtsi
@@ -698,7 +698,7 @@
 		};
 
 		flx0: flexcom@e1818000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe1818000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 			#address-cells = <1>;
@@ -714,7 +714,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
-					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -723,7 +723,7 @@
 		};
 
 		flx1: flexcom@e181c000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe181c000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 			#address-cells = <1>;
@@ -740,14 +740,14 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
-					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx3: flexcom@e1824000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe1824000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 			#address-cells = <1>;
@@ -763,7 +763,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
-					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -791,7 +791,7 @@
 		};
 
 		flx4: flexcom@e2018000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2018000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 			#address-cells = <1>;
@@ -807,7 +807,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
-					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -817,7 +817,7 @@
 		};
 
 		flx7: flexcom@e2024000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2024000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 			#address-cells = <1>;
@@ -833,7 +833,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
-					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -911,7 +911,7 @@
 		};
 
 		flx8: flexcom@e2818000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2818000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 			#address-cells = <1>;
@@ -928,14 +928,14 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
-					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx9: flexcom@e281c000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe281c000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 			#address-cells = <1>;
@@ -952,14 +952,38 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
-					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2820000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx11: flexcom@e2824000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2824000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
 			#address-cells = <1>;
@@ -977,7 +1001,7 @@
 				#size-cells = <0>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
-					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
diff --git a/src/arm/nvidia/tegra124-nyan.dtsi b/src/arm/nvidia/tegra124-nyan.dtsi
index a2ee371802..8125c1b3e8 100644
--- a/src/arm/nvidia/tegra124-nyan.dtsi
+++ b/src/arm/nvidia/tegra124-nyan.dtsi
@@ -338,6 +338,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
diff --git a/src/arm/nvidia/tegra124-venice2.dts b/src/arm/nvidia/tegra124-venice2.dts
index 3924ee385d..df98dc2a67 100644
--- a/src/arm/nvidia/tegra124-venice2.dts
+++ b/src/arm/nvidia/tegra124-venice2.dts
@@ -857,6 +857,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
diff --git a/src/arm/nvidia/tegra30-asus-nexus7-grouper-common.dtsi b/src/arm/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
index a9342e04b1..15f53babdc 100644
--- a/src/arm/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/src/arm/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
@@ -915,6 +915,9 @@
 			reg = <0x1c>;
 
 			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
 		};
 
 		nct72: temperature-sensor@4c {
diff --git a/src/arm/nvidia/tegra30-lg-p880.dts b/src/arm/nvidia/tegra30-lg-p880.dts
new file mode 100644
index 0000000000..2f7754fd42
--- /dev/null
+++ b/src/arm/nvidia/tegra30-lg-p880.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus 4X HD P880";
+	compatible = "lg,p880", "nvidia,tegra30";
+
+	aliases {
+		mmc1 = &sdmmc3; /* uSD slot */
+		mmc2 = &sdmmc1; /* WiFi */
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			host-wlan-wake {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MicroSD pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-data {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			microsd-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			volume-up {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1110>;
+				syna,clip-y-high = <1973>;
+
+				touchscreen-inverted-y;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00050001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000004 0xC0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xC0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000001
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000001
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x000b0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000001
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00090220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2150000>;
+		energy-full-design-microwatt-hours = <8200000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p880",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus 4X HD MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/src/arm/nvidia/tegra30-lg-p895.dts b/src/arm/nvidia/tegra30-lg-p895.dts
new file mode 100644
index 0000000000..e32fafc7f5
--- /dev/null
+++ b/src/arm/nvidia/tegra30-lg-p895.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus Vu P895";
+	compatible = "lg,p895", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* GNSS UART-B pinmux */
+			uartb-cts-rxd {
+				nvidia,pins = "uart2_cts_n_pj5",
+						"uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-rts-txd {
+				nvidia,pins = "uart2_rts_n_pj6",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			memo-key {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-up {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-vdd {
+				nvidia,pins = "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			usim-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1535>;
+				syna,clip-y-high = <2047>;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x0000000f 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000004
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080002 0x00080002 0x00080002
+					0x00080002 0x000e0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2080000>;
+		energy-full-design-microwatt-hours = <7700000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-memo {
+			label = "Memo";
+			gpios = <&gpio TEGRA_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEMO>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		led-power {
+			label = "power::white";
+			gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+
+			linux,default-trigger = "battery-charging";
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	regulator-lcd3v {
+		gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p895",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus Vu MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/src/arm/nvidia/tegra30-lg-x3.dtsi b/src/arm/nvidia/tegra30-lg-x3.dtsi
new file mode 100644
index 0000000000..909260a5d0
--- /dev/null
+++ b/src/arm/nvidia/tegra30-lg-x3.dtsi
@@ -0,0 +1,1812 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen { };
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bed00000 {
+			compatible = "ramoops";
+			reg = <0xbed00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wlan-reset {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wlan-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			gps-pwr-en {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-ldo-en {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-clk-ref {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Bluetooth UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-reset {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-pcm-dap4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EMMC pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-data {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-reset {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-i2c {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-down {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			sen-vdd {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			proxi-vdd {
+				nvidia,pins = "spi2_miso_px1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sen-vio {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nct-irq {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bat-irq {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			charger-irq {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mpu-irq {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			compass-irq {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			light-irq {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LED pinmux */
+			backlight-en {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			flash-led-en {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			keypad-led {
+				nvidia,pins = "kb_row2_pr2",
+						"kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* NFC pinmux */
+			nfc-irq {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			nfc-ven {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nfc-firm {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DC pinmux */
+			lcd-pwr {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-wr-n {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-id {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pclk {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-blue {
+				nvidia,pins = "lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-green {
+				nvidia,pins = "lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-red {
+				nvidia,pins = "lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bridge pinmux */
+			bridge-reset {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rgb-ic-en {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bridge-clk {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			rgb-bridge {
+				nvidia,pins = "lcd_sdin_pz2",
+						"lcd_sdout_pn5",
+						"lcd_cs0_n_pn4",
+						"lcd_sck_pz4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-reset {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			panel-vio {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Touchscreen pinmux */
+			touch-vdd {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-vio {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-irq-n {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			touch-rst-n {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-maker-id {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MHL pinmux */
+			mhl-vio {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-rst-n {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-irq {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mhl-sel {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			hp-detect {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp-hook {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ear-mic-en {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			audio-irq {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			audio-mclk {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MUIC pinmux */
+			muic-irq {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			muic-dp2t {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			muic-usif {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ifx-usb-vbus-en {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcb-rev {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Camera pinmux */
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-pmic-en {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-rst {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-vio {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-rst {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-eprom-pr {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-vcm-pwdn {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Haptic pinmux */
+			haptic-en {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			haptic-osc {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			cp2ap-ack1-host-active {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp2ap-ack2-host-wakeup {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack2-suspend-req {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack1-slave-wakeup {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp-kkp {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cp-crash-irq {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-uarta-tx-ipc {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ap2cp-uarta-rx-ipc {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-cts-cp-rts {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-rts-cp-cts {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			modem-enable {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "hsi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			modem-reset {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-i2s2 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-i2c {
+				nvidia,pins = "drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-uart3 {
+				nvidia,pins = "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gmi {
+				nvidia,pins = "drive_at3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* GNSS GSD5T */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 4) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_vbat>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+
+		/* Console */
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v0_sen>;
+			dvdd-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		max98089: audio-codec@10 {
+			compatible = "maxim,max98089";
+			reg = <0x10>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			assigned-clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			assigned-clock-parents = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		};
+
+		imu@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v0_sen>;
+			vddio-supply = <&vdd_1v8_sen>;
+
+			mount-matrix =  "1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Synaptics RMI4 S3203B touchcreen */
+		touchscreen@20 {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vdd_3v0_touch>;
+			vio-supply = <&vdd_1v8_touch>;
+
+			syna,reset-delay-ms = <20>;
+			syna,startup-delay-ms = <200>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				syna,sensor-type = <1>;
+
+				syna,clip-x-low = <0>;
+				syna,clip-y-low = <0>;
+			};
+		};
+	};
+
+	cam_i2c: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		dw9714: coil@c {
+			compatible = "dongwoon,dw9714";
+			reg = <0x0c>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>;
+
+			vcc-supply = <&vcc_focuser>;
+		};
+
+		camera-pmic@7d {
+			compatible = "ti,lp8720";
+			reg = <0x7d>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+
+			vt_1v2_front: ldo1 {
+				regulator-name = "vt_1v2_dig";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vt_2v7_front: ldo2 {
+				regulator-name = "vt_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			vdd_2v7_rear: ldo3 {
+				regulator-name = "8m_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vio_1v8_rear: ldo4 {
+				regulator-name = "vio_1v8_cam";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc_focuser: ldo5 {
+				regulator-name = "8m_2v8_vcm";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vdd_1v2_rear: buck {
+				regulator-name = "8m_1v2_cam";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	pwr_i2c: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: max77663@1c {
+			compatible = "maxim,max77663";
+			reg = <0x1c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77663_default>;
+
+			max77663_default: pinmux {
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					drive-open-drain = <1>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_vbus>;
+				in-sd1-supply = <&vdd_5v0_vbus>;
+				in-sd2-supply = <&vdd_5v0_vbus>;
+				in-sd3-supply = <&vdd_5v0_vbus>;
+
+				in-ldo0-1-supply = <&vdd_1v8_vio>;
+				in-ldo2-supply   = <&vdd_3v3_vbat>;
+				in-ldo3-5-supply = <&vdd_3v3_vbat>;
+				in-ldo4-6-supply = <&vdd_3v3_vbat>;
+				in-ldo7-8-supply = <&vdd_1v8_vio>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8_vio: sd2 {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				sd3 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo0 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				avdd_3v3_periph: ldo2 {
+					regulator-name = "avdd_usb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_usd: ldo3 {
+					regulator-name = "vdd_sdmmc3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				avdd_1v8_hdmi_pll: ldo6 {
+					regulator-name = "avdd_osc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_1v2_mhl: ldo7 {
+					regulator-name = "vdd_1v2_mhl";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+			};
+		};
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17043";
+			reg = <0x36>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
+
+			monitored-battery = <&battery>;
+
+			maxim,alert-low-soc-level = <10>;
+			wakeup-source;
+		};
+
+		power-sensor@40 {
+			compatible = "ti,ina230";
+			reg = <0x40>;
+
+			vs-supply = <&vdd_3v0_sen>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v0_sen>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&gpio TEGRA_GPIO(Q, 7) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio TEGRA_GPIO(Q, 6) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		/* DSI bridge */
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x1c>;
+			nvidia,reg-addr = <0x41>;
+			nvidia,reg-data = <0x02>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		/* HIFI CODEC */
+		i2s@70080300 {		/* i2s0 */
+			status = "okay";
+		};
+
+		/* BASEBAND */
+		i2s@70080500 {		/* i2s2 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_vbat>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* Micro USB */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&avdd_3v3_periph>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	gps_refclk: clock-gps {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	gps_osc: clock-gps-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		clocks = <&gps_refclk>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-keypad {
+			label = "keypad::white";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_vbat: regulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbat";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_vbus>;
+	};
+
+	vdd_3v0_sen: regulator-sen3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_sensor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_proxi: regulator-proxi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_proxi";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_sen: regulator-sen1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_sensor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_3v0_lcd: regulator-lcd3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v0_lcd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	iovcc_1v8_lcd: regulator-lcd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "iovcc_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_mhl: regulator-mhl1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8_mhl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_touch: regulator-touchpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_touch";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_touch: regulator-touchvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_touch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_1v8_gps: regulator-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_gps";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_front: regulator-frontvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vt_1v8_cam_vio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Int Spk", "SPKL",
+			"Int Spk", "SPKR",
+			"Earpiece", "RECL",
+			"Earpiece", "RECR",
+			"INA1", "Mic Jack",
+			"MIC1", "MICBIAS",
+			"MICBIAS", "Internal Mic 1",
+			"MIC2", "Internal Mic 2";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&max98089>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * this device from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 50C until temperature drops to 49.8C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/nxp/imx/imx1-apf9328.dts b/src/arm/nxp/imx/imx1-apf9328.dts
index e66eef87a7..058e943552 100644
--- a/src/arm/nxp/imx/imx1-apf9328.dts
+++ b/src/arm/nxp/imx/imx1-apf9328.dts
@@ -54,7 +54,7 @@
 		#size-cells = <1>;
 	};
 
-	eth: eth@4,c00000 {
+	eth: ethernet@4,c00000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_eth>;
 		compatible = "davicom,dm9000";
diff --git a/src/arm/nxp/imx/imx1.dtsi b/src/arm/nxp/imx/imx1.dtsi
index 1ac10965fd..389ecb1ebf 100644
--- a/src/arm/nxp/imx/imx1.dtsi
+++ b/src/arm/nxp/imx/imx1.dtsi
@@ -251,7 +251,7 @@
 			};
 		};
 
-		weim: weim@220000 {
+		weim: memory-controller@220000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx1-weim";
diff --git a/src/arm/nxp/imx/imx27.dtsi b/src/arm/nxp/imx/imx27.dtsi
index ec472695c7..ec3ccc8f40 100644
--- a/src/arm/nxp/imx/imx27.dtsi
+++ b/src/arm/nxp/imx/imx27.dtsi
@@ -568,7 +568,7 @@
 			status = "disabled";
 		};
 
-		weim: weim@d8002000 {
+		weim: memory-controller@d8002000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx27-weim";
diff --git a/src/arm/nxp/imx/imx31.dtsi b/src/arm/nxp/imx/imx31.dtsi
index e1ae7c175f..00006c90d9 100644
--- a/src/arm/nxp/imx/imx31.dtsi
+++ b/src/arm/nxp/imx/imx31.dtsi
@@ -352,7 +352,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
 				reg = <0xb8002000 0x1000>;
 				clocks = <&clks 56>;
diff --git a/src/arm/nxp/imx/imx35.dtsi b/src/arm/nxp/imx/imx35.dtsi
index 2d20e5541a..442dc15677 100644
--- a/src/arm/nxp/imx/imx35.dtsi
+++ b/src/arm/nxp/imx/imx35.dtsi
@@ -374,7 +374,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clocks = <&clks 0>;
diff --git a/src/arm/nxp/imx/imx51.dtsi b/src/arm/nxp/imx/imx51.dtsi
index c96d6311df..4efce49022 100644
--- a/src/arm/nxp/imx/imx51.dtsi
+++ b/src/arm/nxp/imx/imx51.dtsi
@@ -578,7 +578,7 @@
 				reg = <0x83fd8000 0x1000>;
 			};
 
-			weim: weim@83fda000 {
+			weim: memory-controller@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-weim";
diff --git a/src/arm/nxp/imx/imx53-qsb-hdmi.dtso b/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
new file mode 100644
index 0000000000..c84e9b0525
--- /dev/null
+++ b/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT overlay for MCIMXHDMICARD as used with the iMX53 QSB or QSRB boards
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	/delete-node/ panel;
+
+	hdmi: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p2v>;
+	};
+};
+
+&display0 {
+	status = "okay";
+};
+
+&display0 {
+	port@1 {
+		display0_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>;
+		iovcc-supply = <&reg_3p2v>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&tve {
+	status = "disabled";
+};
diff --git a/src/arm/nxp/imx/imx6dl-sielaff.dts b/src/arm/nxp/imx/imx6dl-sielaff.dts
new file mode 100644
index 0000000000..7de8d5f265
--- /dev/null
+++ b/src/arm/nxp/imx/imx6dl-sielaff.dts
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sielaff i.MX6 Solo";
+	compatible = "sielaff,imx6dl-board", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: pwm-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm3 0 50000 0>;
+		brightness-levels = <0 0 64 88 112 136 184 232 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_backlight>;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_cec>;
+		cec-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		hdmi-phandle = <&hdmi>;
+	};
+
+	enet_ref: clock-enet-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet-ref";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-0 {
+			gpios = <&gpio2 16 0>;
+			debounce-interval = <10>;
+			linux,code = <1>;
+		};
+
+		key-1 {
+			gpios = <&gpio3 27 0>;
+			debounce-interval = <10>;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 4 0>;
+			debounce-interval = <10>;
+			linux,code = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-debug {
+			label = "debug-led";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	osc_eth_phy: clock-osc-eth-phy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc-eth-phy";
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_backlight>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		regulator-name = "backlight";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	/*
+	 * Set PTP clock to external instead of internal reference, as the
+	 * REF_CLK from the PHY is fed back into the i.MX6 and the GPR
+	 * register needs to be set accordingly (see mach-imx6q.c).
+	 */
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&enet_ref>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&osc_eth_phy>;
+			clock-names = "rmii-ref";
+			micrel,led-mode = <1>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <100>;
+			reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "key-out", "key-in",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"lan9500a-rst", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c4>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio5>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		irq-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds_out: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	disable-over-current;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb1@1 {
+		compatible = "usb4b4,6570";
+		reg = <1>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <12000000 0>;
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "host";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RD0__GPIO6_IO25	0x1b0b0	/* PMIC_IRQ */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x100b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b080
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b080
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b080
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_backlight: regbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: regusbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC		0x1b0b1
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x100b1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/src/arm/nxp/imx/imx6dl-yapp4-common.dtsi b/src/arm/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4b..c32ea040fe 100644
--- a/src/arm/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/src/arm/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -117,17 +117,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
@@ -149,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
diff --git a/src/arm/nxp/imx/imx6q-apalis-eval-v1.2.dts b/src/arm/nxp/imx/imx6q-apalis-eval-v1.2.dts
new file mode 100644
index 0000000000..15d4a98ee9
--- /dev/null
+++ b/src/arm/nxp/imx/imx6q-apalis-eval-v1.2.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2";
+	compatible = "toradex,apalis_imx6q-eval-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+
+	sound-carrier {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "apalis-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 */
+&i2c1 {
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nau8822>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	/* Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		size = <256>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <4>;
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <
+			/* MMC1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <
+			/* SD1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			/* CAN1_PWR_EN */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			/* CAN2_PWR_EN */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_nau8822: nau8822grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+		>;
+	};
+};
diff --git a/src/arm/nxp/imx/imx6q-apalis-eval.dts b/src/arm/nxp/imx/imx6q-apalis-eval.dts
index 3fc079dfd6..e1077e2da5 100644
--- a/src/arm/nxp/imx/imx6q-apalis-eval.dts
+++ b/src/arm/nxp/imx/imx6q-apalis-eval.dts
@@ -7,29 +7,13 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
+#include "imx6q-apalis-eval.dtsi"
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
 	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
 		     "fsl,imx6q";
 
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	reg_pcie_switch: regulator-pcie-switch {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -40,14 +24,6 @@
 		startup-delay-us = <100000>;
 		status = "okay";
 	};
-
-	reg_3v3_sw: regulator-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3.3V_SW";
-	};
 };
 
 &can1 {
@@ -62,102 +38,22 @@
 
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
-	status = "okay";
-
+	/* PCIe Switch */
 	pcie-switch@58 {
 		compatible = "plx,pex8605";
 		reg = <0x58>;
 	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
 };
 
 &pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
 	vpcie-supply = <&reg_pcie_switch>;
 	status = "okay";
 };
 
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
 &sound_spdif {
 	status = "okay";
 };
 
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
 /* MMC1 */
 &usdhc1 {
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-apalis-eval.dtsi b/src/arm/nxp/imx/imx6q-apalis-eval.dtsi
new file mode 100644
index 0000000000..b6c45ad3f4
--- /dev/null
+++ b/src/arm/nxp/imx/imx6q-apalis-eval.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2024 Toradex
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/nxp/imx/imx6qdl-hummingboard.dtsi b/src/arm/nxp/imx/imx6qdl-hummingboard.dtsi
index bfade71490..a955c77cd4 100644
--- a/src/arm/nxp/imx/imx6qdl-hummingboard.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -41,6 +41,11 @@
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
@@ -187,7 +192,7 @@
 	status = "okay";
 
 	/* Pro baseboard model */
-	rtc@68 {
+	carrier_rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
diff --git a/src/arm/nxp/imx/imx6qdl-hummingboard2.dtsi b/src/arm/nxp/imx/imx6qdl-hummingboard2.dtsi
index 0883ef99cd..e6017f9bf6 100644
--- a/src/arm/nxp/imx/imx6qdl-hummingboard2.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-hummingboard2.dtsi
@@ -41,6 +41,11 @@
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
+	aliases {
+		rtc0 = &pcf8523;
+		rtc1 = &snvs_rtc;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
diff --git a/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi b/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
index 2731faede1..d59d5d0e1d 100644
--- a/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@
 	aliases {
 		can0 = &can1;
 		can1 = &can2;
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
 		mdio-gpio0 = &mdio;
 		nand = &gpmi;
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs;
+		switch0 = &switch;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
 	};
@@ -60,7 +64,7 @@
 		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
 			<&gpio1 22 GPIO_ACTIVE_HIGH>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "microchip,ksz8873";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -73,13 +77,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ports@0 {
+				lan1: ports@0 {
 					reg = <0>;
 					phy-mode = "internal";
 					label = "lan1";
 				};
 
-				ports@1 {
+				lan2: ports@1 {
 					reg = <1>;
 					phy-mode = "internal";
 					label = "lan2";
diff --git a/src/arm/nxp/imx/imx6qdl.dtsi b/src/arm/nxp/imx/imx6qdl.dtsi
index 81142c523f..8431b8a994 100644
--- a/src/arm/nxp/imx/imx6qdl.dtsi
+++ b/src/arm/nxp/imx/imx6qdl.dtsi
@@ -1158,7 +1158,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
diff --git a/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts b/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
index 815119c12b..5636fb3661 100644
--- a/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -141,8 +141,10 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		x-size = <1072>;
-		y-size = <1448>;
+		touchscreen-size-x = <1072>;
+		touchscreen-size-y = <1448>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-x;
 	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
diff --git a/src/arm/nxp/imx/imx6sl.dtsi b/src/arm/nxp/imx/imx6sl.dtsi
index 28111efb19..6aa61235e3 100644
--- a/src/arm/nxp/imx/imx6sl.dtsi
+++ b/src/arm/nxp/imx/imx6sl.dtsi
@@ -949,7 +949,7 @@
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
diff --git a/src/arm/nxp/imx/imx6sx.dtsi b/src/arm/nxp/imx/imx6sx.dtsi
index df3a375f0a..0de359d62a 100644
--- a/src/arm/nxp/imx/imx6sx.dtsi
+++ b/src/arm/nxp/imx/imx6sx.dtsi
@@ -1107,7 +1107,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
diff --git a/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi b/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
index 2ac40d6942..f10f052549 100644
--- a/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -321,7 +321,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xfff>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-geam.dts b/src/arm/nxp/imx/imx6ul-geam.dts
index 875ae699c5..2ca18f3dad 100644
--- a/src/arm/nxp/imx/imx6ul-geam.dts
+++ b/src/arm/nxp/imx/imx6ul-geam.dts
@@ -203,7 +203,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 &sai2 {
diff --git a/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9..af337f18a2 100644
--- a/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -156,7 +156,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xffff>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul.dtsi b/src/arm/nxp/imx/imx6ul.dtsi
index a27a7554c2..235aa67661 100644
--- a/src/arm/nxp/imx/imx6ul.dtsi
+++ b/src/arm/nxp/imx/imx6ul.dtsi
@@ -370,7 +370,7 @@
 				};
 			};
 
-			tsc: tsc@2040000 {
+			tsc: touchscreen@2040000 {
 				compatible = "fsl,imx6ul-tsc";
 				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
@@ -538,6 +538,8 @@
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 4>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec2_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -638,6 +640,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -855,7 +858,6 @@
 				clocks = <&clks IMX6UL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -897,6 +899,8 @@
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 3>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec1_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -975,7 +979,7 @@
 				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
@@ -1004,6 +1008,14 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				fec1_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
+
+				fec2_mac_addr: mac-addr@8e {
+					reg = <0x8e 6>;
+				};
 			};
 
 			csi: csi@21c4000 {
diff --git a/src/arm/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/src/arm/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
index 040421f9c9..5e39f8dc13 100644
--- a/src/arm/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
+++ b/src/arm/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
@@ -14,10 +14,12 @@
  */
 
 /*
- * To use usdhc1 as SD card, the WiFi node must be deleted.
+ * To use usdhc1 as SD card, the WiFi node must be deleted. The associated
+ * pwrseq node is also deleted in order to ensure that GPIO H is released.
  * BT is also not available, so remove BT from the UART node.
  */
 /delete-node/ &brcmf;
+/delete-node/ &usdhc1_pwrseq;
 /delete-node/ &bluetooth;
 
 / {
diff --git a/src/arm/nxp/imx/imx6ull-dhcom-som.dtsi b/src/arm/nxp/imx/imx6ull-dhcom-som.dtsi
index 830b5a5064..a74f5273f9 100644
--- a/src/arm/nxp/imx/imx6ull-dhcom-som.dtsi
+++ b/src/arm/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -52,7 +52,7 @@
 	};
 
 	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
-	/omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq {
+	usdhc1_pwrseq: usdhc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
 	};
@@ -273,7 +273,7 @@
 	pinctrl-names = "default";
 	pre-charge-time = <0xfff>;
 	touchscreen-average-samples = <32>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 /* DHCOM UART1 */
diff --git a/src/arm/nxp/imx/imx6ull-dhcor-som.dtsi b/src/arm/nxp/imx/imx6ull-dhcor-som.dtsi
index 45315adfaa..75486e1b0c 100644
--- a/src/arm/nxp/imx/imx6ull-dhcor-som.dtsi
+++ b/src/arm/nxp/imx/imx6ull-dhcor-som.dtsi
@@ -28,10 +28,14 @@
 	/*
 	 * Due to the design as a solderable SOM, there are no capacitors
 	 * below the SoC, therefore higher voltages are required.
+	 * Due to CPU lifetime consideration of the SoC manufacturer and
+	 * the preferred area of operation in the industrial related
+	 * environment, set the maximum frequency for each DHCOM i.MX6ULL
+	 * to 792MHz, as with the industrial type.
 	 */
+	clock-frequency = <792000000>;
 	operating-points = <
 		/* kHz	uV */
-		900000	1275000
 		792000	1250000 /* Voltage increased */
 		528000	1175000
 		396000	1025000
@@ -39,7 +43,6 @@
 	>;
 	fsl,soc-operating-points = <
 		/* KHz	uV */
-		900000	1250000
 		792000	1250000 /* Voltage increased */
 		528000	1175000
 		396000	1175000
diff --git a/src/arm/nxp/imx/imx6ull-tarragon-common.dtsi b/src/arm/nxp/imx/imx6ull-tarragon-common.dtsi
index 3fdece5bd3..5248a05823 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-common.dtsi
+++ b/src/arm/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -805,6 +805,7 @@
 		     &pinctrl_usb_pwr>;
 	dr_mode = "host";
 	power-active-high;
+	over-current-active-low;
 	disable-over-current;
 	status = "okay";
 };
diff --git a/src/arm/nxp/imx/imx6ull.dtsi b/src/arm/nxp/imx/imx6ull.dtsi
index 2bccd45e9f..8a1776067e 100644
--- a/src/arm/nxp/imx/imx6ull.dtsi
+++ b/src/arm/nxp/imx/imx6ull.dtsi
@@ -75,7 +75,7 @@
 				clocks = <&clks IMX6UL_CLK_DUMMY>;
 			};
 
-			iomuxc_snvs: iomuxc-snvs@2290000 {
+			iomuxc_snvs: pinctrl@2290000 {
 				compatible = "fsl,imx6ull-iomuxc-snvs";
 				reg = <0x02290000 0x4000>;
 			};
diff --git a/src/arm/nxp/imx/imx7-mba7.dtsi b/src/arm/nxp/imx/imx7-mba7.dtsi
index 3df6dff773..52869e68f8 100644
--- a/src/arm/nxp/imx/imx7-mba7.dtsi
+++ b/src/arm/nxp/imx/imx7-mba7.dtsi
@@ -18,6 +18,8 @@
 		mmc0 = &usdhc3;
 		mmc1 = &usdhc1;
 		/delete-property/ mmc2;
+		rtc0 = &ds1339;
+		rtc1 = &snvs_rtc;
 	};
 
 	beeper {
@@ -32,11 +34,18 @@
 	gpio_buttons: gpio-keys {
 		compatible = "gpio-keys";
 
+		/*
+		 * NOTE: These buttons are attached to a GPIO-expander.
+		 * Enabling wakeup-source, enables wakeup on all inputs.
+		 * If PE_GPIO[3..6] are used as inputs, they cause a
+		 * wakeup as well.
+		 */
 		button-0 {
 			/* #SWITCH_A */
 			label = "S11";
 			linux,code = <KEY_1>;
 			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button-1 {
@@ -44,6 +53,7 @@
 			label = "S12";
 			linux,code = <KEY_2>;
 			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button-2 {
@@ -51,6 +61,7 @@
 			label = "S13";
 			linux,code = <KEY_3>;
 			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -171,6 +182,14 @@
 		regulator-always-on;
 	};
 
+	reg_vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
 		model = "imx-audio-tlv320aic32x4";
@@ -198,9 +217,9 @@
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_ss0>;
 	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
-		   <&gpio4 2 GPIO_ACTIVE_LOW>;
+		   <&gpio4 2 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -214,8 +233,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
 	phy-supply = <&reg_fec1_pwdn>;
 	phy-handle = <&ethphy1_0>;
 	fsl,magic-packet;
@@ -228,10 +245,15 @@
 		ethphy1_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
 		};
 	};
 };
@@ -290,13 +312,17 @@
 	lm75: temperature-sensor@49 {
 		compatible = "national,lm75";
 		reg = <0x49>;
+		vs-supply = <&reg_vcc_3v3>;
 	};
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	tlv320aic32x4: audio-codec@18 {
@@ -319,13 +345,17 @@
 		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
 	};
 };
 
 &i2c3 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -334,213 +364,213 @@
 	pinctrl-0 = <&pinctrl_hog_mba7_1>;
 
 	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c>,
+			<MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74>,
+			<MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74>,
+			<MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74>,
+			<MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74>,
+			<MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74>;
+	};
+
+	pinctrl_ecspi1_ss0: ecspi1ss0grp {
 		fsl,pins = <
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
-			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
-			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
-			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19			0x74
 		>;
 	};
 
 	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
-			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
-			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
-			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
-		>;
+		fsl,pins =
+			<MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c>,
+			<MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74>,
+			<MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74>,
+			<MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0		0x74>;
 	};
 
 	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02>,
+			<MX7D_PAD_GPIO1_IO11__ENET1_MDC				0x00>,
+			<MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71>,
+			<MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet1_phy: enet1phygrp {
+		fsl,pins =
 			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
+			<MX7D_PAD_ENET1_COL__GPIO7_IO15				0x40000070>,
 			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
-		>;
+			<MX7D_PAD_GPIO1_IO09__GPIO1_IO9				0x40000078>;
 	};
 
 	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
-		>;
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52>;
 	};
 
 	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
-		>;
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52>;
 	};
 
 	pinctrl_hog_mba7_1: hogmba71grp {
-		fsl,pins = <
+		fsl,pins =
 			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
-			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
+			<MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c>,
+			<MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074>,
 			/* #BOOT_EN */
-			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
-		>;
+			<MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010>;
 	};
 
 	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__GPIO4_IO10		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x40000078>;
 	};
 
 	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x40000078>;
 	};
 
 	pinctrl_pca9555: pca95550grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
-		>;
+		fsl,pins =
+			<MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78>;
 	};
 
 	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11
-			MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c
-			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c
-			MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c
-
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14
-		>;
+		fsl,pins =
+			<MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11>,
+			<MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c>,
+			<MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c>,
+
+			<MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14>,
+			<MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14>;
 	};
 
 	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
-			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
-			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
-		>;
+		fsl,pins =
+			<MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e>,
+			<MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76>,
+			<MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76>,
+			<MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e>;
 	};
 
 	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
-			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
-			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
-			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
-		>;
+		fsl,pins =
+			<MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e>,
+			<MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76>,
+			<MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76>,
+			<MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e>;
 	};
 
 	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C4_SCL__UART5_DCE_RX	0x7e>,
+			<MX7D_PAD_I2C4_SDA__UART5_DCE_TX	0x76>;
 	};
 
 	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
-			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
-			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
-		>;
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d>,
+			<MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75>,
+			<MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75>,
+			<MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d>;
 	};
 
 	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
-			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
-			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e>,
+			<MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76>,
+			<MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76>,
 			/* Limitation: RTS is not connected */
-			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
-		>;
+			<MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e>;
 	};
 
-	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
-		fsl,pins = <
+	pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+		fsl,pins =
 			/* WP */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
+			<MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c>,
 			/* CD */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
+			<MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c>,
 			/* VSELECT */
-			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
-		>;
+			<MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59>;
 	};
 
 	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-		>;
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5e>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5a>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5b>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b>;
 	};
 };
 
 &iomuxc_lpsr {
 	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
+		fsl,pins =
 			/* LCD_CONTRAST */
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
-		>;
+			<MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50>;
 	};
 
 	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59>;
 	};
 
 	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
 	};
 };
 
@@ -560,6 +590,10 @@
 	status = "okay";
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -605,6 +639,7 @@
 };
 
 &usbh {
+	disable-over-current;
 	status = "okay";
 };
 
@@ -630,6 +665,8 @@
 	vmmc-supply = <&reg_sd1_vmmc>;
 	bus-width = <4>;
 	no-1-8-v;
+	no-sdio;
+	no-mmc;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx7-tqma7.dtsi b/src/arm/nxp/imx/imx7-tqma7.dtsi
index 3fc3130f9d..028961eb71 100644
--- a/src/arm/nxp/imx/imx7-tqma7.dtsi
+++ b/src/arm/nxp/imx/imx7-tqma7.dtsi
@@ -30,8 +30,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -109,7 +112,7 @@
 			};
 
 			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
+				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
@@ -135,7 +138,7 @@
 	};
 
 	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
-	se97b: temperature-sensor-eeprom@1e {
+	se97b: temperature-sensor@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
 	};
@@ -143,15 +146,18 @@
 	/* ST M24C64 */
 	m24c64: eeprom@50 {
 		compatible = "atmel,24c64";
+		read-only;
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&vgen4_reg>;
 		status = "okay";
 	};
 
 	at24c02: eeprom@56 {
-		compatible = "atmel,24c02";
+		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x56>;
 		pagesize = <16>;
+		vcc-supply = <&vgen4_reg>;
 		status = "okay";
 	};
 
@@ -163,91 +169,89 @@
 
 &iomuxc {
 	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
-			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__GPIO4_IO9	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__GPIO4_IO8	0x40000078>;
 	};
 
 	pinctrl_pmic1: pmic1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
-		>;
+		fsl,pins =
+			<MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C>;
 	};
 
 	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
-			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
-			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
-			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
-			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
-			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
-			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
-		>;
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A>,
+			<MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A>,
+			<MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A>,
+			<MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A>,
+			<MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11>,
+			<MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54>,
+			<MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54>;
 	};
 
 	pinctrl_qspi_reset: qspi_resetgrp {
-		fsl,pins = <
+		fsl,pins =
 			/* #QSPI_RESET */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
-		>;
+			<MX7D_PAD_EPDC_DATA04__GPIO2_IO4	0x52>;
 	};
 
 	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD		0x59>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK		0x56>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE	0x19>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
+	pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5a>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
+	pinctrl_usdhc3_200mhz: usdhc3_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5b>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b>;
 	};
 };
 
 &iomuxc_lpsr {
 	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
 	};
 };
 
@@ -265,10 +269,6 @@
 	};
 };
 
-&sdma {
-	status = "okay";
-};
-
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -278,6 +278,8 @@
 	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
+	no-sd;
+	no-sdio;
 	vmmc-supply = <&vgen4_reg>;
 	vqmmc-supply = <&sw2_reg>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx7d-mba7.dts b/src/arm/nxp/imx/imx7d-mba7.dts
index 32bf9fa9d0..0443faa3df 100644
--- a/src/arm/nxp/imx/imx7d-mba7.dts
+++ b/src/arm/nxp/imx/imx7d-mba7.dts
@@ -21,8 +21,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
 	phy-supply = <&reg_fec2_pwdn>;
 	phy-handle = <&ethphy2_0>;
 	fsl,magic-packet;
@@ -35,59 +33,85 @@
 		ethphy2_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet2_phy>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
 		};
 	};
 };
 
+&gpio2 {
+	pcie-dis-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-dis";
+	};
+
+	pcie-rst-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-rst";
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+	pinctrl-0 = <&pinctrl_hog_mba7_1>, <&pinctrl_hog_pcie>;
 
 	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
-			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
+		fsl,pins =
+			<MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02>,
+			<MX7D_PAD_SD2_WP__ENET2_MDC			0x00>,
+			<MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71>,
+			<MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71>,
+			<MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71>,
+			<MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71>,
+			<MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71>,
+			<MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71>,
+			<MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79>,
+			<MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79>,
+			<MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79>,
+			<MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79>,
+			<MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79>,
+			<MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet2_phy: enet2phygrp {
+		fsl,pins =
 			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
+			<MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070>,
 			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
-		>;
+			<MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078>;
 	};
 
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* #pcie_wake */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
+	pinctrl_hog_pcie: hogpciegrp {
+		fsl,pins =
 			/* #pcie_rst */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
+			<MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70>,
 			/* #pcie_dis */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
-		>;
+			<MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins =
+			/* #pcie_wake */
+			<MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70>;
 	};
 };
 
 &iomuxc_lpsr {
 	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59>;
 	};
 };
 
@@ -98,16 +122,14 @@
 	/* probe deferral not supported */
 	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
 	vbus-supply = <&reg_usb_otg2_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
+	disable-over-current;
 	dr_mode = "host";
 	status = "okay";
 };
diff --git a/src/arm/nxp/imx/imx7s-warp.dts b/src/arm/nxp/imx/imx7s-warp.dts
index ba7231b364..7bab113ca6 100644
--- a/src/arm/nxp/imx/imx7s-warp.dts
+++ b/src/arm/nxp/imx/imx7s-warp.dts
@@ -210,6 +210,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};
diff --git a/src/arm/nxp/ls/ls1021a.dtsi b/src/arm/nxp/ls/ls1021a.dtsi
index d471cc5efa..e86998ca77 100644
--- a/src/arm/nxp/ls/ls1021a.dtsi
+++ b/src/arm/nxp/ls/ls1021a.dtsi
@@ -808,7 +808,9 @@
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
+			usb3-lpm-capable;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			snps,host-vbus-glitches;
 		};
 
 		pcie@3400000 {
diff --git a/src/arm/nxp/mxs/imx28-evk.dts b/src/arm/nxp/mxs/imx28-evk.dts
index 9ebb7371e2..330d3aff6b 100644
--- a/src/arm/nxp/mxs/imx28-evk.dts
+++ b/src/arm/nxp/mxs/imx28-evk.dts
@@ -198,7 +198,7 @@
 		clocks = <&saif0>;
 	};
 
-	at24@51 {
+	eeprom@51 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x51>;
diff --git a/src/arm/qcom/qcom-apq8026-lg-lenok.dts b/src/arm/qcom/qcom-apq8026-lg-lenok.dts
index 0a1fd5eb3c..a70de21bf1 100644
--- a/src/arm/qcom/qcom-apq8026-lg-lenok.dts
+++ b/src/arm/qcom/qcom-apq8026-lg-lenok.dts
@@ -7,6 +7,7 @@
 
 #include "qcom-msm8226.dtsi"
 #include "pm8226.dtsi"
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 
 /delete-node/ &adsp_region;
 
@@ -56,6 +57,29 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlan_regulator_default_state>;
 	};
+
+	pwm_vibrator: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+
+		pinctrl-0 = <&vibrator_clk_default_state>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&pwm_vibrator 0 10000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8226_l28>;
+		enable-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&vibrator_en_default_state>;
+		pinctrl-names = "default";
+	};
 };
 
 &adsp {
@@ -330,6 +354,20 @@
 		};
 	};
 
+	vibrator_clk_default_state: vibrator-clk-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_en_default_state: vibrator-en-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	wlan_hostwake_default_state: wlan-hostwake-default-state {
 		pins = "gpio37";
 		function = "gpio";
diff --git a/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index cffc069712..da3be658e8 100644
--- a/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/src/arm/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -5,142 +5,13 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
-#include "qcom-msm8226.dtsi"
-#include "pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-/delete-node/ &smem_region;
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {
 	model = "Samsung Galaxy Tab 4 10.1";
 	compatible = "samsung,matisse-wifi", "qcom,apq8026";
 	chassis-type = "tablet";
 
-	aliases {
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_2; /* SDC2 SD card slot */
-		display0 = &framebuffer0;
-	};
-
-	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		stdout-path = "display0";
-
-		framebuffer0: framebuffer@3200000 {
-			compatible = "simple-framebuffer";
-			reg = <0x03200000 0x800000>;
-			width = <1280>;
-			height = <800>;
-			stride = <(1280 * 3)>;
-			format = "r8g8b8";
-		};
-	};
-
-	gpio-hall-sensor {
-		compatible = "gpio-keys";
-
-		event-hall-sensor {
-			label = "Hall Effect Sensor";
-			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <15>;
-			linux,can-disable;
-			wakeup-source;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		key-home {
-			label = "Home";
-			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOMEPAGE>;
-			debounce-interval = <15>;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-backlight {
-		compatible = "i2c-gpio";
-		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
-		pinctrl-0 = <&backlight_i2c_default_state>;
-		pinctrl-names = "default";
-
-		i2c-gpio,delay-us = <4>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		backlight@2c {
-			compatible = "ti,lp8556";
-			reg = <0x2c>;
-
-			dev-ctrl = /bits/ 8 <0x80>;
-			init-brt = /bits/ 8 <0x3f>;
-
-			pwms = <&backlight_pwm 0 100000>;
-			pwm-names = "lp8556";
-
-			rom-a0h {
-				rom-addr = /bits/ 8 <0xa0>;
-				rom-val = /bits/ 8 <0x44>;
-			};
-
-			rom-a1h {
-				rom-addr = /bits/ 8 <0xa1>;
-				rom-val = /bits/ 8 <0x6c>;
-			};
-
-			rom-a5h {
-				rom-addr = /bits/ 8 <0xa5>;
-				rom-val = /bits/ 8 <0x24>;
-			};
-		};
-	};
-
-	backlight_pwm: pwm {
-		compatible = "clk-pwm";
-		#pwm-cells = <2>;
-		clocks = <&mmcc CAMSS_GP0_CLK>;
-		pinctrl-0 = <&backlight_pwm_default_state>;
-		pinctrl-names = "default";
-	};
-
-	reg_tsp_1p8v: regulator-tsp-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "tsp_1p8v";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_en_default_state>;
-	};
-
 	reg_tsp_3p3v: regulator-tsp-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "tsp_3p3v";
@@ -153,74 +24,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsp_en1_default_state>;
 	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@3200000 {
-			reg = <0x03200000 0x800000>;
-			no-map;
-		};
-
-		mpss@8400000 {
-			reg = <0x08400000 0x1f00000>;
-			no-map;
-		};
-
-		mba@a300000 {
-			reg = <0x0a300000 0x100000>;
-			no-map;
-		};
-
-		reserved@cb00000 {
-			reg = <0x0cb00000 0x700000>;
-			no-map;
-		};
-
-		wcnss@d200000 {
-			reg = <0x0d200000 0x700000>;
-			no-map;
-		};
-
-		adsp_region: adsp@d900000 {
-			reg = <0x0d900000 0x1800000>;
-			no-map;
-		};
-
-		venus@f100000 {
-			reg = <0x0f100000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0x0fa00000 0x100000>;
-			no-map;
-		};
-
-		reserved@fb00000 {
-			reg = <0x0fb00000 0x260000>;
-			no-map;
-		};
-
-		rfsa@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
-		};
-
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
-};
-
-&adsp {
-	status = "okay";
 };
 
 &blsp1_i2c2 {
@@ -243,21 +46,6 @@
 	};
 };
 
-&blsp1_i2c4 {
-	status = "okay";
-
-	muic: usb-switch@25 {
-		compatible = "siliconmitus,sm5502-muic";
-		reg = <0x25>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&muic_int_default_state>;
-	};
-};
-
 &blsp1_i2c5 {
 	status = "okay";
 
@@ -268,6 +56,13 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 
+		linux,keycodes = <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_APPSELECT>,
+				 <KEY_BACK>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsp_int_rst_default_state>;
 
@@ -278,242 +73,19 @@
 	};
 };
 
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pm8226-regulators";
-
-		pm8226_s3: s3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_s5: s5 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-
-		pm8226_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8226_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l3: l3 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1337500>;
-			regulator-always-on;
-		};
-
-		pm8226_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l5: l5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8226_l7: l7 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1850000>;
-		};
-
-		pm8226_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8226_l9: l9 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8226_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l14: l14 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-		};
-
-		pm8226_l15: l15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8226_l16: l16 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8226_l17: l17 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-always-on;
-		};
-
-		pm8226_l18: l18 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_l20: l20 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pm8226_l21: l21 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l22: l22 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_l23: l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8226_l24: l24 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8226_l25: l25 {
-			regulator-min-microvolt = <1775000>;
-			regulator-max-microvolt = <2125000>;
-		};
-
-		pm8226_l26: l26 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_l27: l27 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l28: l28 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_lvs1: lvs1 {};
-	};
-};
-
-&sdhc_1 {
-	vmmc-supply = <&pm8226_l17>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	bus-width = <8>;
-	non-removable;
-
-	status = "okay";
+&pm8226_l3 {
+	regulator-max-microvolt = <1337500>;
 };
 
-&sdhc_2 {
-	vmmc-supply = <&pm8226_l18>;
-	vqmmc-supply = <&pm8226_l21>;
-
-	bus-width = <4>;
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
+&pm8226_s4 {
+	regulator-max-microvolt = <1800000>;
 };
 
 &tlmm {
-	accel_int_default_state: accel-int-default-state {
-		pins = "gpio54";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	backlight_i2c_default_state: backlight-i2c-default-state {
-		pins = "gpio20", "gpio21";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	backlight_pwm_default_state: backlight-pwm-default-state {
-		pins = "gpio33";
-		function = "gp0_clk";
-	};
-
-	muic_int_default_state: muic-int-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tsp_en_default_state: tsp-en-default-state {
-		pins = "gpio31";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	tsp_en1_default_state: tsp-en1-default-state {
 		pins = "gpio73";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
-
-	tsp_int_rst_default_state: tsp-int-rst-default-state {
-		pins = "gpio17";
-		function = "gpio";
-		drive-strength = <10>;
-		bias-pull-up;
-	};
-};
-
-&usb {
-	extcon = <&muic>, <&muic>;
-	status = "okay";
-};
-
-&usb_hs_phy {
-	extcon = <&muic>;
-	v1p8-supply = <&pm8226_l10>;
-	v3p3-supply = <&pm8226_l20>;
 };
diff --git a/src/arm/qcom/qcom-apq8064.dtsi b/src/arm/qcom/qcom-apq8064.dtsi
index 3faf57035d..9a5ba97877 100644
--- a/src/arm/qcom/qcom-apq8064.dtsi
+++ b/src/arm/qcom/qcom-apq8064.dtsi
@@ -190,7 +190,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	clocks {
@@ -244,7 +244,7 @@
 
 		modem_smsm: modem@1 {
 			reg = <1>;
-			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -252,7 +252,7 @@
 
 		q6_smsm: q6@2 {
 			reg = <2>;
-			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -260,7 +260,7 @@
 
 		wcnss_smsm: wcnss@3 {
 			reg = <3>;
-			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -268,7 +268,7 @@
 
 		dsps_smsm: dsps@4 {
 			reg = <4>;
-			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -299,7 +299,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&ps_hold>;
@@ -321,9 +321,9 @@
 		timer@200a000 {
 			compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
 				     "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
 			cpu-offset = <0x80000>;
@@ -365,28 +365,44 @@
 			#clock-cells = <0>;
 		};
 
-		saw0: power-controller@2089000 {
+		saw0: power-manager@2089000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw0_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw1: power-controller@2099000 {
+		saw1: power-manager@2099000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw1_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw2: power-controller@20a9000 {
+		saw2: power-manager@20a9000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw2_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw3: power-controller@20b9000 {
+		saw3: power-manager@20b9000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw3_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
 		sps_sic_non_secure: sps-sic-non-secure@12100000 {
@@ -411,7 +427,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12450000 0x100>,
 				      <0x12400000 0x03>;
-				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -423,7 +439,7 @@
 				pinctrl-1 = <&i2c1_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
-				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
@@ -452,7 +468,7 @@
 				pinctrl-0 = <&i2c2_pins>;
 				pinctrl-1 = <&i2c2_pins_sleep>;
 				pinctrl-names = "default", "sleep";
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
@@ -539,7 +555,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x100>,
 				      <0x1a200000 0x03>;
-				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -548,7 +564,7 @@
 			gsbi5_spi: spi@1a280000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&spi5_default>;
 				pinctrl-1 = <&spi5_sleep>;
 				pinctrl-names = "default", "sleep";
@@ -575,7 +591,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16540000 0x100>,
 				      <0x16500000 0x03>;
-				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -611,7 +627,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
 				      <0x16600000 0x1000>;
-				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -908,7 +924,7 @@
 		sdcc3bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -936,7 +952,7 @@
 		sdcc4bam: dma-controller@121c2000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC4_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -965,7 +981,7 @@
 		sdcc1bam: dma-controller@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
diff --git a/src/arm/qcom/qcom-apq8084.dtsi b/src/arm/qcom/qcom-apq8084.dtsi
index 2b1f9d0fb5..8204e64d9a 100644
--- a/src/arm/qcom/qcom-apq8084.dtsi
+++ b/src/arm/qcom/qcom-apq8084.dtsi
@@ -629,30 +629,29 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
+		saw0: power-manager@f9089000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw1: power-controller@f9099000 {
+		saw1: power-manager@f9099000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw2: power-controller@f90a9000 {
+		saw2: power-manager@f90a9000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw3: power-controller@f90b9000 {
+		saw3: power-manager@f90b9000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,apq8084-saw2-v2.1-l2", "qcom,saw2";
 			reg = <0xf9012000 0x1000>;
-			regulator;
 		};
 
 		acc0: power-manager@f9088000 {
diff --git a/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index 0505270cf5..f7ac8f9d0b 100644
--- a/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/src/arm/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -27,87 +27,83 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+};
 
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
+&prng {
+	status = "okay";
+};
 
-		blsp_dma: dma-controller@7884000 {
-			status = "okay";
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
 		};
+	};
 
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
 		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_pins>;
-			pinctrl-names = "default";
-			status = "okay";
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio54";
 		};
-
-		cryptobam: dma-controller@8e04000 {
-			status = "okay";
+		pinconf {
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
 		};
-
-		crypto@8e3a000 {
-			status = "okay";
+		pinconf_cs {
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
 		};
+	};
+};
 
-		watchdog@b017000 {
-			status = "okay";
-		};
+&blsp_dma {
+	status = "okay";
+};
 
-		wifi@a000000 {
-			status = "okay";
-		};
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
-		wifi@a800000 {
-			status = "okay";
-		};
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <24000000>;
 	};
 };
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+};
diff --git a/src/arm/qcom/qcom-ipq4019.dtsi b/src/arm/qcom/qcom-ipq4019.dtsi
index f989bd741c..681cb3fc80 100644
--- a/src/arm/qcom/qcom-ipq4019.dtsi
+++ b/src/arm/qcom/qcom-ipq4019.dtsi
@@ -162,10 +162,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <48000000>;
 		always-on;
 	};
@@ -350,34 +350,29 @@
 			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		saw0: regulator@b089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@b089000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw1: regulator@b099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@b099000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw2: regulator@b0a9000 {
-			compatible = "qcom,saw2";
+		saw2: power-manager@b0a9000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw3: regulator@b0b9000 {
-			compatible = "qcom,saw2";
+		saw3: power-manager@b0b9000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw_l2: regulator@b012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@b012000 {
+			compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2";
 			reg = <0xb012000 0x1000>;
-			regulator;
 		};
 
 		blsp1_uart1: serial@78af000 {
@@ -684,7 +679,7 @@
 			clocks = <&gcc GCC_USB2_MASTER_CLK>,
 				 <&gcc GCC_USB2_SLEEP_CLK>,
 				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
+			clock-names = "core", "sleep", "mock_utmi";
 			ranges;
 			status = "disabled";
 
diff --git a/src/arm/qcom/qcom-ipq8064.dtsi b/src/arm/qcom/qcom-ipq8064.dtsi
index 6a7f4dd0f7..2eb6758b6a 100644
--- a/src/arm/qcom/qcom-ipq8064.dtsi
+++ b/src/arm/qcom/qcom-ipq8064.dtsi
@@ -586,10 +586,9 @@
 			#clock-cells = <0>;
 		};
 
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@2089000 {
+			compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
 		};
 
 		acc1: clock-controller@2098000 {
@@ -601,10 +600,9 @@
 			#clock-cells = <0>;
 		};
 
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@2099000 {
+			compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
 		};
 
 		nss_common: syscon@3000000 {
@@ -623,7 +621,6 @@
 			ranges;
 
 			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
 
 			status = "disabled";
 
@@ -669,7 +666,6 @@
 			ranges;
 
 			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
 
 			status = "disabled";
 
diff --git a/src/arm/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/src/arm/qcom/qcom-msm8226-samsung-matisse-common.dtsi
new file mode 100644
index 0000000000..a15a44fc01
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+
+			pwms = <&backlight_pwm 0 100000>;
+			pwm-names = "lp8556";
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0x44>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x6c>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+		};
+	};
+
+	backlight_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+		pinctrl-0 = <&backlight_pwm_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default_state: backlight-pwm-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/src/arm/qcom/qcom-msm8226.dtsi b/src/arm/qcom/qcom-msm8226.dtsi
index b492c95e5d..270973e856 100644
--- a/src/arm/qcom/qcom-msm8226.dtsi
+++ b/src/arm/qcom/qcom-msm8226.dtsi
@@ -20,11 +20,6 @@
 
 	chosen { };
 
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	clocks {
 		xo_board: xo_board {
 			compatible = "fixed-clock";
@@ -39,6 +34,57 @@
 		};
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8226", "qcom,scm";
@@ -47,6 +93,11 @@
 		};
 	};
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -185,6 +236,117 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,msm8226-saw2-v2.1-l2", "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8226", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@f9020000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw0: power-manager@f9089000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw1: power-manager@f9099000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw2: power-manager@f90a9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw3: power-manager@f90b9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -201,35 +363,35 @@
 			status = "disabled";
 		};
 
-		sdhc_2: mmc@f98a4900 {
+		sdhc_3: mmc@f9864900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
 			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_default_state>;
+			pinctrl-0 = <&sdhc3_default_state>;
 			status = "disabled";
 		};
 
-		sdhc_3: mmc@f9864900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&gcc GCC_SDCC3_APPS_CLK>,
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc3_default_state>;
+			pinctrl-0 = <&sdhc2_default_state>;
 			status = "disabled";
 		};
 
@@ -272,7 +434,6 @@
 		};
 
 		blsp1_i2c1: i2c@f9923000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9923000 0x1000>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,10 +443,10 @@
 			pinctrl-0 = <&blsp1_i2c1_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c2: i2c@f9924000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9924000 0x1000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,10 +456,10 @@
 			pinctrl-0 = <&blsp1_i2c2_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c3: i2c@f9925000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9925000 0x1000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -308,10 +469,10 @@
 			pinctrl-0 = <&blsp1_i2c3_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c4: i2c@f9926000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9926000 0x1000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -321,10 +482,10 @@
 			pinctrl-0 = <&blsp1_i2c4_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c5: i2c@f9927000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9927000 0x1000>;
 			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
@@ -334,6 +495,7 @@
 			pinctrl-0 = <&blsp1_i2c5_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c6: i2c@f9928000 {
@@ -351,33 +513,6 @@
 			status = "disabled";
 		};
 
-		cci: cci@fda0c000 {
-			compatible = "qcom,msm8226-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfda0c000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_CLK>;
-			clock-names = "camss_top_ahb",
-				      "cci_ahb",
-				      "cci";
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&cci_default>;
-			pinctrl-1 = <&cci_sleep>;
-
-			status = "disabled";
-
-			cci_i2c0: i2c-bus@0 {
-				reg = <0>;
-				clock-frequency = <400000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
 		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
@@ -417,6 +552,18 @@
 			};
 		};
 
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,msm8226-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8226";
 			reg = <0xfc400000 0x4000>;
@@ -430,148 +577,30 @@
 				      "sleep_clk";
 		};
 
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8226";
-			reg = <0xfd8c0000 0x6000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
-				 <&gcc GPLL0_VOTE>,
-				 <&gcc GPLL1_VOTE>,
-				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>;
-			clock-names = "xo",
-				      "mmss_gpll0_vote",
-				      "gpll0_vote",
-				      "gpll1_vote",
-				      "gfx3d_clk_src",
-				      "dsi0pll",
-				      "dsi0pllbyte";
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,msm8226-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 117>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
 
-			blsp1_i2c1_pins: blsp1-i2c1-state {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfc428000 0x4000>;
 
-			blsp1_i2c2_pins: blsp1-i2c2-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
+			apss_master_stats: sram@150 {
+				reg = <0x150 0x14>;
 			};
 
-			blsp1_i2c3_pins: blsp1-i2c3-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
+			mpss_master_stats: sram@b50 {
+				reg = <0xb50 0x14>;
 			};
 
-			blsp1_i2c4_pins: blsp1-i2c4-state {
-				pins = "gpio14", "gpio15";
-				function = "blsp_i2c4";
-				drive-strength = <2>;
-				bias-disable;
+			lpss_master_stats: sram@1550 {
+				reg = <0x1550 0x14>;
 			};
 
-			blsp1_i2c5_pins: blsp1-i2c5-state {
-				pins = "gpio18", "gpio19";
-				function = "blsp_i2c5";
-				drive-strength = <2>;
-				bias-disable;
+			pronto_master_stats: sram@1f50 {
+				reg = <0x1f50 0x14>;
 			};
-
-			blsp1_i2c6_pins: blsp1-i2c6-state {
-				pins = "gpio22", "gpio23";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			cci_default: cci-default-state {
-				pins = "gpio29", "gpio30";
-				function = "cci_i2c0";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			cci_sleep: cci-sleep-state {
-				pins = "gpio29", "gpio30";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdhc1_default_state: sdhc1-default-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data-pins {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc2_default_state: sdhc2-default-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data-pins {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc3_default_state: sdhc3-default-state {
-				clk-pins {
-					pins = "gpio44";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				cmd-pins {
-					pins = "gpio43";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-
-				data-pins {
-					pins = "gpio39", "gpio40", "gpio41", "gpio42";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-		};
+		};
 
 		tsens: thermal-sensor@fc4a9000 {
 			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
@@ -714,170 +743,153 @@
 			#interrupt-cells = <4>;
 		};
 
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
 		};
 
-		timer@f9020000 {
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8226-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 117>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
+			blsp1_i2c1_pins: blsp1-i2c1-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
+			blsp1_i2c2_pins: blsp1-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
+			blsp1_i2c3_pins: blsp1-i2c3-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
+			blsp1_i2c4_pins: blsp1-i2c4-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
+			blsp1_i2c5_pins: blsp1-i2c5-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
+			blsp1_i2c6_pins: blsp1-i2c6-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
 			};
-		};
-
-		sram@fc190000 {
-			compatible = "qcom,msm8226-rpm-stats";
-			reg = <0xfc190000 0x10000>;
-		};
 
-		rpm_msg_ram: sram@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xfc428000 0x4000>;
-
-			apss_master_stats: sram@150 {
-				reg = <0x150 0x14>;
-			};
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
 
-			mpss_master_stats: sram@b50 {
-				reg = <0xb50 0x14>;
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			lpss_master_stats: sram@1550 {
-				reg = <0x1550 0x14>;
-			};
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
 
-			pronto_master_stats: sram@1f50 {
-				reg = <0x1f50 0x14>;
+				drive-strength = <2>;
+				bias-disable;
 			};
-		};
-
-		tcsr_mutex: hwlock@fd484000 {
-			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
-			reg = <0xfd484000 0x1000>;
-			#hwlock-cells = <1>;
-		};
-
-		adsp: remoteproc@fe200000 {
-			compatible = "qcom,msm8226-adsp-pil";
-			reg = <0xfe200000 0x100>;
-
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			power-domains = <&rpmpd MSM8226_VDDCX>;
-			power-domain-names = "cx";
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_region>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
 
-			status = "disabled";
+			sdhc1_default_state: sdhc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
 
-			smd-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				cmd-data-pins {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
 
-				qcom,ipc = <&apcs 8 8>;
-				qcom,smd-edge = <1>;
+			sdhc2_default_state: sdhc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
 
-				label = "lpass";
+				cmd-data-pins {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
 			};
-		};
 
-		sram@fdd00000 {
-			compatible = "qcom,msm8226-ocmem";
-			reg = <0xfdd00000 0x2000>,
-			      <0xfec00000 0x20000>;
-			reg-names = "ctrl", "mem";
-			ranges = <0 0xfec00000 0x20000>;
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
-			clock-names = "core";
+			sdhc3_default_state: sdhc3-default-state {
+				clk-pins {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+				cmd-pins {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
 
-			gmu_sram: gmu-sram@0 {
-				reg = <0x0 0x20000>;
+				data-pins {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
 			};
 		};
 
-		sram@fe805000 {
-			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
-			reg = <0xfe805000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 
-				mode-bootloader = <0x77665500>;
-				mode-normal = <0x77665501>;
-				mode-recovery = <0x77665502>;
-			};
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte";
 		};
 
 		mdss: display-subsystem@fd900000 {
@@ -1007,6 +1019,33 @@
 			};
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			reg = <0xfda0c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gpu: adreno@fdb00000 {
 			compatible = "qcom,adreno-305.18", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
@@ -1046,6 +1085,71 @@
 				};
 			};
 		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8226-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x20000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
+			clock-names = "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x20000>;
+			};
+		};
+
+		adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8226-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+
+				label = "lpass";
+			};
+		};
+
+		sram@fe805000 {
+			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-bootloader = <0x77665500>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/src/arm/qcom/qcom-msm8660.dtsi b/src/arm/qcom/qcom-msm8660.dtsi
index a7c245b9c8..455ba4bf1b 100644
--- a/src/arm/qcom/qcom-msm8660.dtsi
+++ b/src/arm/qcom/qcom-msm8660.dtsi
@@ -47,7 +47,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,scorpion-mp-pmu";
-		interrupts = <1 9 0x304>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	clocks {
@@ -89,12 +89,11 @@
 
 		timer@2000000 {
 			compatible = "qcom,scss-timer", "qcom,msm-timer";
-			interrupts = <1 0 0x301>,
-				     <1 1 0x301>,
-				     <1 2 0x301>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x02000000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
+			clock-frequency = <27000000>;
 			cpu-offset = <0x40000>;
 		};
 
@@ -105,7 +104,7 @@
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 173>;
 			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
@@ -283,7 +282,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x19c40000 0x1000>,
 				      <0x19c00000 0x1000>;
-				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -292,7 +291,7 @@
 			gsbi12_i2c: i2c@19c80000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x19c80000 0x1000>;
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
diff --git a/src/arm/qcom/qcom-msm8926-htc-memul.dts b/src/arm/qcom/qcom-msm8926-htc-memul.dts
index ed328b2433..3037344eb2 100644
--- a/src/arm/qcom/qcom-msm8926-htc-memul.dts
+++ b/src/arm/qcom/qcom-msm8926-htc-memul.dts
@@ -107,7 +107,20 @@
 		};
 
 		unknown@fb00000 {
-			reg = <0x0fb00000 0x1b00000>;
+			reg = <0x0fb00000 0x280000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		unknown@ff00000 {
+			reg = <0x0ff00000 0x1700000>;
 			no-map;
 		};
 	};
diff --git a/src/arm/qcom/qcom-msm8926-samsung-matisselte.dts b/src/arm/qcom/qcom-msm8926-samsung-matisselte.dts
new file mode 100644
index 0000000000..d0e1bc39f8
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8926-samsung-matisselte.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Stefan Hansson <newbyte@postmarketos.org>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1 LTE";
+	compatible = "samsung,matisselte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "tablet";
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+};
+
+&tlmm {
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/src/arm/qcom/qcom-msm8960-pins.dtsi b/src/arm/qcom/qcom-msm8960-pins.dtsi
new file mode 100644
index 0000000000..4fa9827712
--- /dev/null
+++ b/src/arm/qcom/qcom-msm8960-pins.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&msmgpio {
+	i2c3_default_state: i2c3-default-state {
+		i2c3-pins {
+			pins = "gpio16", "gpio17";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	i2c3_sleep_state: i2c3-sleep-state {
+		i2c3-pins {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+	};
+};
diff --git a/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts b/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
index 1a5116336f..af6cc6393d 100644
--- a/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -4,6 +4,9 @@
 
 #include "qcom-msm8960.dtsi"
 #include "pm8921.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -19,6 +22,36 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-home {
+			label = "Home";
+			gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
 };
 
 &gsbi5 {
@@ -52,6 +85,27 @@
 	status = "okay";
 };
 
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+
+	// Atmel mXT224S touchscreen
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		vdda-supply = <&pm8921_lvs6>;
+		vdd-supply = <&pm8921_l17>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen>;
+	};
+};
+
 &msmgpio {
 	spi1_default: spi1-default-state {
 		mosi-pins {
@@ -83,6 +137,21 @@
 			bias-disable;
 		};
 	};
+
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio40", "gpio50", "gpio81";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	touchscreen: touchscreen-int-state {
+		pins = "gpio11";
+		function = "gpio";
+		output-enable;
+		bias-disable;
+		drive-strength = <2>;
+	};
 };
 
 &pm8921 {
@@ -245,7 +314,7 @@
 		};
 
 		pm8921_l17: l17 {
-			regulator-min-microvolt = <1800000>;
+			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
diff --git a/src/arm/qcom/qcom-msm8960.dtsi b/src/arm/qcom/qcom-msm8960.dtsi
index f420740e06..922f9e4946 100644
--- a/src/arm/qcom/qcom-msm8960.dtsi
+++ b/src/arm/qcom/qcom-msm8960.dtsi
@@ -220,16 +220,24 @@
 			#clock-cells = <0>;
 		};
 
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@2089000 {
+			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw0_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@2099000 {
+			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw1_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
 		gsbi5: gsbi@16400000 {
@@ -359,5 +367,33 @@
 				};
 			};
 		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16200000 0x100>;
+			ranges;
+			cell-index = <3>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				pinctrl-0 = <&i2c3_default_state>;
+				pinctrl-1 = <&i2c3_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
 	};
 };
+#include "qcom-msm8960-pins.dtsi"
diff --git a/src/arm/qcom/qcom-msm8974.dtsi b/src/arm/qcom/qcom-msm8974.dtsi
index b141398378..5efc38d712 100644
--- a/src/arm/qcom/qcom-msm8974.dtsi
+++ b/src/arm/qcom/qcom-msm8974.dtsi
@@ -31,7 +31,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <GIC_PPI 9 0xf04>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 
 		CPU0: cpu@0 {
 			compatible = "qcom,krait";
@@ -110,7 +110,7 @@
 
 	pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	rpm: remoteproc {
@@ -346,10 +346,9 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,msm8974-saw2-v2.1-l2", "qcom,saw2";
 			reg = <0xf9012000 0x1000>;
-			regulator;
 		};
 
 		watchdog@f9017000 {
@@ -424,7 +423,7 @@
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw0: power-controller@f9089000 {
+		saw0: power-manager@f9089000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -434,7 +433,7 @@
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw1: power-controller@f9099000 {
+		saw1: power-manager@f9099000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -444,7 +443,7 @@
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw2: power-controller@f90a9000 {
+		saw2: power-manager@f90a9000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -454,7 +453,7 @@
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw3: power-controller@f90b9000 {
+		saw3: power-manager@f90b9000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -538,7 +537,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9923000 0x1000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			pinctrl-names = "default", "sleep";
@@ -566,7 +565,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9925000 0x1000>;
-			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			pinctrl-names = "default", "sleep";
@@ -666,7 +665,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9968000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			pinctrl-names = "default", "sleep";
@@ -1234,7 +1233,7 @@
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -2403,10 +2402,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <19200000>;
 	};
 };
diff --git a/src/arm/qcom/qcom-sdx55.dtsi b/src/arm/qcom/qcom-sdx55.dtsi
index 27429d0fed..edc9aaf828 100644
--- a/src/arm/qcom/qcom-sdx55.dtsi
+++ b/src/arm/qcom/qcom-sdx55.dtsi
@@ -580,12 +580,16 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_GDSC>;
 
@@ -727,57 +731,57 @@
 
 			frame@17821000 {
 				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17821000 0x1000>,
 				      <0x17822000 0x1000>;
 			};
 
 			frame@17823000 {
 				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17823000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17824000 {
 				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17824000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17825000 {
 				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17825000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17826000 {
 				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17826000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17827000 {
 				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17827000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17828000 {
 				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17828000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17829000 {
 				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17829000 0x1000>;
 				status = "disabled";
 			};
diff --git a/src/arm/qcom/qcom-sdx65.dtsi b/src/arm/qcom/qcom-sdx65.dtsi
index 40591a4da6..a949454212 100644
--- a/src/arm/qcom/qcom-sdx65.dtsi
+++ b/src/arm/qcom/qcom-sdx65.dtsi
@@ -492,23 +492,25 @@
 			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-					"sleep";
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_GDSC>;
 
@@ -667,57 +669,57 @@
 
 			frame@17821000 {
 				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17821000 0x1000>,
 				      <0x17822000 0x1000>;
 			};
 
 			frame@17823000 {
 				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17823000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17824000 {
 				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17824000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17825000 {
 				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17825000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17826000 {
 				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17826000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17827000 {
 				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17827000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17828000 {
 				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17828000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17829000 {
 				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17829000 0x1000>;
 				status = "disabled";
 			};
@@ -804,10 +806,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			<1 12 0xf08>,
-			<1 10 0xf08>,
-			<1 11 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <19200000>;
 	};
 };
diff --git a/src/arm/renesas/r8a73a4-ape6evm.dts b/src/arm/renesas/r8a73a4-ape6evm.dts
index ed75c01dbe..3d02f065f7 100644
--- a/src/arm/renesas/r8a73a4-ape6evm.dts
+++ b/src/arm/renesas/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/src/arm/renesas/r8a73a4.dtsi b/src/arm/renesas/r8a73a4.dtsi
index c390669670..ac654ff45d 100644
--- a/src/arm/renesas/r8a73a4.dtsi
+++ b/src/arm/renesas/r8a73a4.dtsi
@@ -450,17 +450,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
@@ -621,6 +624,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&main_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		pll0_div2_clk: pll0_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
@@ -686,9 +696,8 @@
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
-			clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
-				 <&main_div2_clk>,
-				 <&cpg_clocks R8A73A4_CLK_HP>,
+			clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
+				 <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
 				 <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
@@ -702,7 +711,7 @@
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+			clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
diff --git a/src/arm/renesas/r8a7740.dtsi b/src/arm/renesas/r8a7740.dtsi
index 55884ec701..d13ab86c3a 100644
--- a/src/arm/renesas/r8a7740.dtsi
+++ b/src/arm/renesas/r8a7740.dtsi
@@ -459,6 +459,7 @@
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -474,6 +475,7 @@
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
diff --git a/src/arm/renesas/r8a7778.dtsi b/src/arm/renesas/r8a7778.dtsi
index 8d4530ed2f..b80e832c92 100644
--- a/src/arm/renesas/r8a7778.dtsi
+++ b/src/arm/renesas/r8a7778.dtsi
@@ -199,7 +199,9 @@
 		reg = <0xffd80000 0x30>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -214,7 +216,9 @@
 		reg = <0xffd81000 0x30>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -230,6 +234,7 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -250,6 +255,8 @@
 		reg =	<0xffd90000 0x1000>,	/* SRU */
 			<0xffd91000 0x240>,	/* SSI */
 			<0xfffe0000 0x24>;	/* ADG */
+		reg-names = "sru", "ssi", "adg";
+
 		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
 			<&mstp3_clks R8A7778_CLK_SSI7>,
 			<&mstp3_clks R8A7778_CLK_SSI6>,
diff --git a/src/arm/renesas/r8a7779.dtsi b/src/arm/renesas/r8a7779.dtsi
index 7743af5e2a..1944703cba 100644
--- a/src/arm/renesas/r8a7779.dtsi
+++ b/src/arm/renesas/r8a7779.dtsi
@@ -402,7 +402,9 @@
 		reg = <0xffd80000 0x30>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -417,7 +419,9 @@
 		reg = <0xffd81000 0x30>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -433,6 +437,7 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/src/arm/rockchip/rk3128-xpi-3128.dts b/src/arm/rockchip/rk3128-xpi-3128.dts
index 03a9788151..21c1678f4e 100644
--- a/src/arm/rockchip/rk3128-xpi-3128.dts
+++ b/src/arm/rockchip/rk3128-xpi-3128.dts
@@ -47,6 +47,17 @@
 		regulator-boot-on;
 	};
 
+	hdmi-connnector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
 	/*
 	 * This is a vbus-supply, which also supplies the GL852G usb hub,
 	 * thus has to be always-on
@@ -239,6 +250,10 @@
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	vmmc-supply = <&vcc_io>;
@@ -328,6 +343,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_connector_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &mdio {
 	phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -423,3 +448,7 @@
 &usb2phy_otg {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
diff --git a/src/arm/rockchip/rk3128.dtsi b/src/arm/rockchip/rk3128.dtsi
index e2264c40b9..fb98873fd9 100644
--- a/src/arm/rockchip/rk3128.dtsi
+++ b/src/arm/rockchip/rk3128.dtsi
@@ -115,6 +115,12 @@
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+		status = "disabled";
+	};
+
 	gpu_opp_table: opp-table-1 {
 		compatible = "operating-points-v2";
 
@@ -246,6 +252,32 @@
 		};
 	};
 
+	vop: vop@1010e000 {
+		compatible = "rockchip,rk3126-vop";
+		reg = <0x1010e000 0x300>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>, <&cru DCLK_VOP>,
+			 <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop",
+			      "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>,
+			 <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb",
+			      "dclk";
+		power-domains = <&power RK3128_PD_VIO>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
 	qos_gpu: qos@1012d000 {
 		compatible = "rockchip,rk3128-qos", "syscon";
 		reg = <0x1012d000 0x20>;
@@ -436,6 +468,34 @@
 		};
 	};
 
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3128-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI>, <&cru DCLK_VOP>;
+		clock-names = "pclk", "ref";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+		power-domains = <&power RK3128_PD_VIO>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	timer0: timer@20044000 {
 		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
 		reg = <0x20044000 0x20>;
diff --git a/src/arm/rockchip/rk322x.dtsi b/src/arm/rockchip/rk322x.dtsi
index 831561fc18..96421355c2 100644
--- a/src/arm/rockchip/rk322x.dtsi
+++ b/src/arm/rockchip/rk322x.dtsi
@@ -736,14 +736,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop: endpoint@0 {
-					reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
+				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/src/arm/rockchip/rk3288.dtsi b/src/arm/rockchip/rk3288.dtsi
index ead343dc3d..3f1d640afa 100644
--- a/src/arm/rockchip/rk3288.dtsi
+++ b/src/arm/rockchip/rk3288.dtsi
@@ -1240,27 +1240,37 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
-		#sound-dai-cells = <0>;
-		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
 		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				hdmi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_hdmi>;
 				};
+
 				hdmi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/src/arm/rockchip/rv1126-sonoff-ihost.dtsi b/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
index 32b329e87a..9a87dc0d5f 100644
--- a/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
+++ b/src/arm/rockchip/rv1126-sonoff-ihost.dtsi
@@ -8,6 +8,8 @@
 	aliases {
 		ethernet0 = &gmac;
 		mmc0 = &emmc;
+		mmc1 = &sdio;
+		mmc2 = &sdmmc;
 	};
 
 	chosen {
@@ -325,7 +327,7 @@
 	pmuio1-supply = <&vcc3v3_sys>;
 	vccio1-supply = <&vcc_1v8>;
 	vccio2-supply = <&vccio_sd>;
-	vccio3-supply = <&vcc_1v8>;
+	vccio3-supply = <&vcc3v3_sd>;
 	vccio4-supply = <&vcc_dovdd>;
 	vccio5-supply = <&vcc_1v8>;
 	vccio6-supply = <&vcc_1v8>;
@@ -343,14 +345,14 @@
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <100000000>;
+	max-frequency = <50000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
 	rockchip,default-sample-phase = <90>;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc3v3_sys>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
 };
diff --git a/src/arm/samsung/exynos4412-i9300.dts b/src/arm/samsung/exynos4412-i9300.dts
index 61aca5798f..b79d456e97 100644
--- a/src/arm/samsung/exynos4412-i9300.dts
+++ b/src/arm/samsung/exynos4412-i9300.dts
@@ -18,7 +18,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
+		reg = <0x40000000 0x3fc00000>;
 	};
 };
 
diff --git a/src/arm/samsung/exynos4412-i9305.dts b/src/arm/samsung/exynos4412-i9305.dts
index 77083f1a82..1048ef5d9b 100644
--- a/src/arm/samsung/exynos4412-i9305.dts
+++ b/src/arm/samsung/exynos4412-i9305.dts
@@ -11,7 +11,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 };
 
diff --git a/src/arm/samsung/exynos4412-n710x.dts b/src/arm/samsung/exynos4412-n710x.dts
index 0a151437fc..eee1000dea 100644
--- a/src/arm/samsung/exynos4412-n710x.dts
+++ b/src/arm/samsung/exynos4412-n710x.dts
@@ -9,7 +9,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 
 	/* bootargs are passed in by bootloader */
diff --git a/src/arm/samsung/exynos4412-p4note.dtsi b/src/arm/samsung/exynos4412-p4note.dtsi
index 0b89d5682f..28a6058027 100644
--- a/src/arm/samsung/exynos4412-p4note.dtsi
+++ b/src/arm/samsung/exynos4412-p4note.dtsi
@@ -23,7 +23,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 
 	aliases {
@@ -362,6 +362,39 @@
 	status = "okay";
 };
 
+&i2c_1 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lsm330dlc-accel";
+		reg = <0x19>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-0 = <&accelerometer_irq>;
+		pinctrl-names = "default";
+		mount-matrix =	"1",  "0",  "0",
+				"0", "-1",  "0",
+				"0",  "0", "-1";
+	};
+
+	gyro@6b {
+		compatible = "st,lsm330dlc-gyro";
+		reg = <0x6b>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-0 = <&gyro_data_enable &gyro_irq>;
+		pinctrl-names = "default";
+		mount-matrix =	"1",  "0",  "0",
+				"0", "-1",  "0",
+				"0",  "0", "-1";
+	};
+};
+
 &i2c_3 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
@@ -844,6 +877,12 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	gyro_data_enable: gyro-data-enable-pins {
+		samsung,pins = "gpl2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
 	uart_sel: uart-sel-pins {
 		samsung,pins = "gpl2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -894,12 +933,24 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
+	accelerometer_irq: accelerometer-irq-pins {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	stmpe_adc_irq: stmpe-adc-irq-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	gyro_irq: gyro-irq-pins {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/src/arm/samsung/exynos5420-galaxy-tab-common.dtsi b/src/arm/samsung/exynos5420-galaxy-tab-common.dtsi
index f525b2f5e4..2460409670 100644
--- a/src/arm/samsung/exynos5420-galaxy-tab-common.dtsi
+++ b/src/arm/samsung/exynos5420-galaxy-tab-common.dtsi
@@ -30,6 +30,7 @@
 
 	aliases {
 		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
 		mmc2 = &mmc_2;
 	};
 
@@ -39,7 +40,7 @@
 
 	memory@20000000 {
 		device_type = "memory";
-		reg = <0x20000000 0xc0000000>;
+		reg = <0x20000000 0xbfa00000>;
 	};
 
 	firmware@2073000 {
@@ -87,6 +88,13 @@
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
+
+	mmc1_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpy7 7 GPIO_ACTIVE_LOW>;
+		clocks = <&s2mps11_osc S2MPS11_CLK_BT>;
+		clock-names = "ext_clock";
+	};
 };
 
 &cci {
@@ -620,6 +628,25 @@
 	vqmmc-supply = <&ldo3_reg>;
 };
 
+/* WiFi */
+&mmc_1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	card-detect-delay = <200>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&mmc1_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+		    <&sd1_bus4>, <&wifi_en>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&ldo2_reg>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	status = "okay";
+};
+
 /* External sdcard */
 &mmc_2 {
 	status = "okay";
@@ -649,6 +676,11 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+
+	wifi_en: wifi-en-pins {
+		samsung,pins = "gpy7-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
diff --git a/src/arm/samsung/exynos5420-peach-pit.dts b/src/arm/samsung/exynos5420-peach-pit.dts
index 4e757b6e28..3759742d38 100644
--- a/src/arm/samsung/exynos5420-peach-pit.dts
+++ b/src/arm/samsung/exynos5420-peach-pit.dts
@@ -967,6 +967,7 @@
 		reg = <0>;
 		spi-max-frequency = <3125000>;
 		google,has-vbc-nvram;
+		wakeup-source;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
diff --git a/src/arm/samsung/exynos5422-odroidxu3-common.dtsi b/src/arm/samsung/exynos5422-odroidxu3-common.dtsi
index b4a851aa88..4a4c55a4be 100644
--- a/src/arm/samsung/exynos5422-odroidxu3-common.dtsi
+++ b/src/arm/samsung/exynos5422-odroidxu3-common.dtsi
@@ -55,7 +55,7 @@
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			thermal-sensors = <&tmu_cpu0>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
@@ -78,12 +78,6 @@
 					hysteresis = <0>; /* millicelsius */
 					type = "critical";
 				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu0_alert2
-				 */
 				cpu0_alert3: cpu-alert-3 {
 					temperature = <70000>; /* millicelsius */
 					hysteresis = <10000>; /* millicelsius */
@@ -144,7 +138,7 @@
 		};
 		cpu1_thermal: cpu1-thermal {
 			thermal-sensors = <&tmu_cpu1>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
@@ -217,7 +211,7 @@
 		};
 		cpu2_thermal: cpu2-thermal {
 			thermal-sensors = <&tmu_cpu2>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
@@ -290,7 +284,7 @@
 		};
 		cpu3_thermal: cpu3-thermal {
 			thermal-sensors = <&tmu_cpu3>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
@@ -363,7 +357,7 @@
 		};
 		gpu_thermal: gpu-thermal {
 			thermal-sensors = <&tmu_gpu>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
diff --git a/src/arm/samsung/exynos5800-peach-pi.dts b/src/arm/samsung/exynos5800-peach-pi.dts
index f91bc4ae00..9bbbdce910 100644
--- a/src/arm/samsung/exynos5800-peach-pi.dts
+++ b/src/arm/samsung/exynos5800-peach-pi.dts
@@ -949,6 +949,7 @@
 		reg = <0>;
 		spi-max-frequency = <3125000>;
 		google,has-vbc-nvram;
+		wakeup-source;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
diff --git a/src/arm/st/stih407-pinctrl.dtsi b/src/arm/st/stih407-pinctrl.dtsi
index 7815669fe8..dcb821f567 100644
--- a/src/arm/st/stih407-pinctrl.dtsi
+++ b/src/arm/st/stih407-pinctrl.dtsi
@@ -462,14 +462,14 @@
 			serial0 {
 				pinctrl_serial0: serial0-0 {
 					st,pins {
-						tx =  <&pio17 0 ALT1 OUT>;
-						rx =  <&pio17 1 ALT1 IN>;
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
 					};
 				};
 				pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
 					st,pins {
-						tx =  <&pio17 0 ALT1 OUT>;
-						rx =  <&pio17 1 ALT1 IN>;
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
 						cts = <&pio17 2 ALT1 IN>;
 						rts = <&pio17 3 ALT1 OUT>;
 					};
diff --git a/src/arm/st/stm32f769-disco-mb1166-reva09.dts b/src/arm/st/stm32f769-disco-mb1166-reva09.dts
new file mode 100644
index 0000000000..ff7ff32371
--- /dev/null
+++ b/src/arm/st/stm32f769-disco-mb1166-reva09.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include "stm32f769-disco.dts"
+
+&panel0 {
+	compatible = "frida,frd400b25025", "novatek,nt35510";
+	vddi-supply = <&vcc_3v3>;
+	vdd-supply = <&vcc_3v3>;
+	/delete-property/power-supply;
+};
diff --git a/src/arm/st/stm32f769-disco.dts b/src/arm/st/stm32f769-disco.dts
index 5d12ae25b3..52c5baf58a 100644
--- a/src/arm/st/stm32f769-disco.dts
+++ b/src/arm/st/stm32f769-disco.dts
@@ -41,7 +41,7 @@
  */
 
 /dts-v1/;
-#include "stm32f746.dtsi"
+#include "stm32f769.dtsi"
 #include "stm32f769-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -60,6 +60,19 @@
 		reg = <0xC0000000 0x1000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,dma {
+			compatible = "shared-dma-pool";
+			linux,dma-default;
+			no-map;
+			size = <0x100000>;
+		};
+	};
+
 	aliases {
 		serial0 = &usart1;
 	};
@@ -92,9 +105,9 @@
 		clock-names = "main_clk";
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -114,6 +127,45 @@
 	clock-frequency = <25000000>;
 };
 
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel0: panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>; /* dsi virtual channel (0..3) */
+		reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
+		power-supply = <&vcc_3v3>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins_b>;
 	pinctrl-names = "default";
@@ -122,13 +174,23 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint {
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };
 
 &sdio2 {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain", "sleep";
diff --git a/src/arm/st/stm32f769.dtsi b/src/arm/st/stm32f769.dtsi
new file mode 100644
index 0000000000..4e7d903214
--- /dev/null
+++ b/src/arm/st/stm32f769.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include "stm32f746.dtsi"
+
+/ {
+	soc {
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016c00 0x800>;
+			clocks = <&rcc 1 CLK_F769_DSI>, <&clk_hse>;
+			clock-names = "pclk", "ref";
+			resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+			reset-names = "apb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/st/stm32mp131.dtsi b/src/arm/st/stm32mp131.dtsi
index b04d24c939..3900f32da7 100644
--- a/src/arm/st/stm32mp131.dtsi
+++ b/src/arm/st/stm32mp131.dtsi
@@ -1315,6 +1315,13 @@
 			status = "disabled";
 		};
 
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
+			status = "disabled";
+		};
+
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
diff --git a/src/arm/st/stm32mp135f-dk.dts b/src/arm/st/stm32mp135f-dk.dts
index eea740d097..52171214a3 100644
--- a/src/arm/st/stm32mp135f-dk.dts
+++ b/src/arm/st/stm32mp135f-dk.dts
@@ -93,6 +93,14 @@
 	};
 };
 
+&crc1 {
+	status = "okay";
+};
+
+&cryp {
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c1_pins_a>;
diff --git a/src/arm/st/stm32mp157.dtsi b/src/arm/st/stm32mp157.dtsi
index 6197d87889..97cd24227c 100644
--- a/src/arm/st/stm32mp157.dtsi
+++ b/src/arm/st/stm32mp157.dtsi
@@ -20,7 +20,7 @@
 		dsi: dsi@5a000000 {
 			compatible = "st,stm32-dsi";
 			reg = <0x5a000000 0x800>;
-			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clocks = <&rcc DSI>, <&clk_hse>, <&rcc DSI_PX>;
 			clock-names = "pclk", "ref", "px_clk";
 			phy-dsi-supply = <&reg18>;
 			resets = <&rcc DSI_R>;
diff --git a/src/arm/st/stm32mp157a-dk1-scmi.dts b/src/arm/st/stm32mp157a-dk1-scmi.dts
index ce5937270a..306e1bc2a5 100644
--- a/src/arm/st/stm32mp157a-dk1-scmi.dts
+++ b/src/arm/st/stm32mp157a-dk1-scmi.dts
@@ -30,7 +30,7 @@
 };
 
 &dsi {
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/src/arm/st/stm32mp157c-dk2-scmi.dts b/src/arm/st/stm32mp157c-dk2-scmi.dts
index c20a73841c..956da5f26c 100644
--- a/src/arm/st/stm32mp157c-dk2-scmi.dts
+++ b/src/arm/st/stm32mp157c-dk2-scmi.dts
@@ -36,7 +36,7 @@
 
 &dsi {
 	phy-dsi-supply = <&scmi_reg18>;
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/src/arm/st/stm32mp157c-ed1-scmi.dts b/src/arm/st/stm32mp157c-ed1-scmi.dts
index 5e2eaf57ce..8e4b0db198 100644
--- a/src/arm/st/stm32mp157c-ed1-scmi.dts
+++ b/src/arm/st/stm32mp157c-ed1-scmi.dts
@@ -35,7 +35,7 @@
 };
 
 &dsi {
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/src/arm/st/stm32mp157c-ev1-scmi.dts b/src/arm/st/stm32mp157c-ev1-scmi.dts
index 3226fb945a..72b9cab2d9 100644
--- a/src/arm/st/stm32mp157c-ev1-scmi.dts
+++ b/src/arm/st/stm32mp157c-ev1-scmi.dts
@@ -36,7 +36,7 @@
 
 &dsi {
 	phy-dsi-supply = <&scmi_reg18>;
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/src/arm/st/stm32mp157c-lxa-tac-gen2.dts b/src/arm/st/stm32mp157c-lxa-tac-gen2.dts
index 8a34d15e90..4cc1770316 100644
--- a/src/arm/st/stm32mp157c-lxa-tac-gen2.dts
+++ b/src/arm/st/stm32mp157c-lxa-tac-gen2.dts
@@ -148,7 +148,7 @@
 		compatible = "ti,lmp92064";
 		reg = <0>;
 
-		reset-gpios = <&gpioa 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		shunt-resistor-micro-ohms = <15000>;
 		spi-max-frequency = <5000000>;
 		vdd-supply = <&reg_pb_3v3>;
diff --git a/src/arm/st/stm32mp15xc-lxa-tac.dtsi b/src/arm/st/stm32mp15xc-lxa-tac.dtsi
index fc3a2386db..cfaf8adde3 100644
--- a/src/arm/st/stm32mp15xc-lxa-tac.dtsi
+++ b/src/arm/st/stm32mp15xc-lxa-tac.dtsi
@@ -409,7 +409,7 @@ baseboard_eeprom: &sip_eeprom {
 &spi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2_pins_c>;
-	cs-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpiof 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -471,6 +471,10 @@ baseboard_eeprom: &sip_eeprom {
 		interrupt-parent = <&gpioa>;
 		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
 
+		/* Reduce RGMII EMI emissions by reducing drive strength */
+		microchip,hi-drive-strength-microamp = <2000>;
+		microchip,lo-drive-strength-microamp = <8000>;
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/src/arm/ti/davinci/da850.dtsi b/src/arm/ti/davinci/da850.dtsi
index f759fdfe1b..1d3fb5397c 100644
--- a/src/arm/ti/davinci/da850.dtsi
+++ b/src/arm/ti/davinci/da850.dtsi
@@ -536,7 +536,7 @@
 			reg = <0x40000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <16>;
+			interrupts = <16>, <17>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc0 5>;
@@ -566,7 +566,7 @@
 			reg = <0x21b000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <72>;
+			interrupts = <72>, <73>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc1 18>;
diff --git a/src/arm/ti/keystone/keystone-clocks.dtsi b/src/arm/ti/keystone/keystone-clocks.dtsi
index 0397c3423d..20bab90ee0 100644
--- a/src/arm/ti/keystone/keystone-clocks.dtsi
+++ b/src/arm/ti/keystone/keystone-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 clock tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/src/arm/ti/keystone/keystone-k2e-clocks.dtsi b/src/arm/ti/keystone/keystone-k2e-clocks.dtsi
index cf30e007fe..74720dbf31 100644
--- a/src/arm/ti/keystone/keystone-k2e-clocks.dtsi
+++ b/src/arm/ti/keystone/keystone-k2e-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison SoC specific device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/src/arm/ti/keystone/keystone-k2e-evm.dts b/src/arm/ti/keystone/keystone-k2e-evm.dts
index 6978d6a362..58099ce8d4 100644
--- a/src/arm/ti/keystone/keystone-k2e-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2e-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison EVM device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
index 5c88a90903..e586350ae4 100644
--- a/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2e-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Edison Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/src/arm/ti/keystone/keystone-k2e.dtsi b/src/arm/ti/keystone/keystone-k2e.dtsi
index 65c32946c5..662aa33cba 100644
--- a/src/arm/ti/keystone/keystone-k2e.dtsi
+++ b/src/arm/ti/keystone/keystone-k2e.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison soc device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/src/arm/ti/keystone/keystone-k2g-evm.dts b/src/arm/ti/keystone/keystone-k2g-evm.dts
index f0ddbbcdc9..bf5f67d702 100644
--- a/src/arm/ti/keystone/keystone-k2g-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2g-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G EVM
  *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/keystone/keystone-k2g-ice.dts b/src/arm/ti/keystone/keystone-k2g-ice.dts
index 6ceb0d5c63..264e1e0d23 100644
--- a/src/arm/ti/keystone/keystone-k2g-ice.dts
+++ b/src/arm/ti/keystone/keystone-k2g-ice.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G Industrial Communication Engine EVM
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
index 7109ca0316..974c8f2fa7 100644
--- a/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2g-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G Netcp driver
  *
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@4020000 {
diff --git a/src/arm/ti/keystone/keystone-k2g.dtsi b/src/arm/ti/keystone/keystone-k2g.dtsi
index 102d59694d..790b29ab0f 100644
--- a/src/arm/ti/keystone/keystone-k2g.dtsi
+++ b/src/arm/ti/keystone/keystone-k2g.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G SOC
  *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi b/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi
index 4ba6912176..3ca4722087 100644
--- a/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi
+++ b/src/arm/ti/keystone/keystone-k2hk-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking SoC clock nodes
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/src/arm/ti/keystone/keystone-k2hk-evm.dts b/src/arm/ti/keystone/keystone-k2hk-evm.dts
index 8dfb542950..b824fad9a4 100644
--- a/src/arm/ti/keystone/keystone-k2hk-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2hk-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking EVM device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
index c2ee775eab..3ab1b5d6f9 100644
--- a/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Hawking Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/src/arm/ti/keystone/keystone-k2hk.dtsi b/src/arm/ti/keystone/keystone-k2hk.dtsi
index da6d3934c2..4fdf4b3038 100644
--- a/src/arm/ti/keystone/keystone-k2hk.dtsi
+++ b/src/arm/ti/keystone/keystone-k2hk.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking soc specific device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/src/arm/ti/keystone/keystone-k2l-clocks.dtsi b/src/arm/ti/keystone/keystone-k2l-clocks.dtsi
index 635528064d..fcfc2fb6cc 100644
--- a/src/arm/ti/keystone/keystone-k2l-clocks.dtsi
+++ b/src/arm/ti/keystone/keystone-k2l-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 lamarr SoC clock nodes
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/src/arm/ti/keystone/keystone-k2l-evm.dts b/src/arm/ti/keystone/keystone-k2l-evm.dts
index be619e39a1..ccda63ab12 100644
--- a/src/arm/ti/keystone/keystone-k2l-evm.dts
+++ b/src/arm/ti/keystone/keystone-k2l-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Lamarr EVM device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
index 1afebd7458..b8f880faaa 100644
--- a/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
+++ b/src/arm/ti/keystone/keystone-k2l-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Lamarr Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/src/arm/ti/keystone/keystone-k2l.dtsi b/src/arm/ti/keystone/keystone-k2l.dtsi
index 2062fe5616..330b437b66 100644
--- a/src/arm/ti/keystone/keystone-k2l.dtsi
+++ b/src/arm/ti/keystone/keystone-k2l.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Lamarr SoC specific device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/src/arm/ti/keystone/keystone.dtsi b/src/arm/ti/keystone/keystone.dtsi
index 1fd04bb37a..ff16428860 100644
--- a/src/arm/ti/keystone/keystone.dtsi
+++ b/src/arm/ti/keystone/keystone.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/src/arm/ti/omap/am335x-baltos-ir2110.dts b/src/arm/ti/omap/am335x-baltos-ir2110.dts
index ea5882ed70..f82d2231df 100644
--- a/src/arm/ti/omap/am335x-baltos-ir2110.dts
+++ b/src/arm/ti/omap/am335x-baltos-ir2110.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-baltos-ir3220.dts b/src/arm/ti/omap/am335x-baltos-ir3220.dts
index ea4f8dde64..74a2191af1 100644
--- a/src/arm/ti/omap/am335x-baltos-ir3220.dts
+++ b/src/arm/ti/omap/am335x-baltos-ir3220.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-baltos-ir5221.dts b/src/arm/ti/omap/am335x-baltos-ir5221.dts
index ec914f27d1..723ff88f76 100644
--- a/src/arm/ti/omap/am335x-baltos-ir5221.dts
+++ b/src/arm/ti/omap/am335x-baltos-ir5221.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-baltos-leds.dtsi b/src/arm/ti/omap/am335x-baltos-leds.dtsi
index 6a52e42b9e..049fd8e1b4 100644
--- a/src/arm/ti/omap/am335x-baltos-leds.dtsi
+++ b/src/arm/ti/omap/am335x-baltos-leds.dtsi
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /*#include "am33xx.dtsi"*/
diff --git a/src/arm/ti/omap/am335x-baltos.dtsi b/src/arm/ti/omap/am335x-baltos.dtsi
index c14d5b70c7..a4beb71855 100644
--- a/src/arm/ti/omap/am335x-baltos.dtsi
+++ b/src/arm/ti/omap/am335x-baltos.dtsi
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 #include "am33xx.dtsi"
diff --git a/src/arm/ti/omap/am335x-base0033.dts b/src/arm/ti/omap/am335x-base0033.dts
index eba843e22e..46078af4b7 100644
--- a/src/arm/ti/omap/am335x-base0033.dts
+++ b/src/arm/ti/omap/am335x-base0033.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
  *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
  */
 
 #include "am335x-igep0033.dtsi"
diff --git a/src/arm/ti/omap/am335x-bone-common.dtsi b/src/arm/ti/omap/am335x-bone-common.dtsi
index 96451c8a81..2d0216840f 100644
--- a/src/arm/ti/omap/am335x-bone-common.dtsi
+++ b/src/arm/ti/omap/am335x-bone-common.dtsi
@@ -289,8 +289,8 @@
 	 * For details, see linux-omap mailing list May 2015 thread
 	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
 	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *	https://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	https://www.spinics.net/lists/linux-omap/msg118615.html
 	 *
 	 * You can override this later with
 	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
diff --git a/src/arm/ti/omap/am335x-cm-t335.dts b/src/arm/ti/omap/am335x-cm-t335.dts
index 72990e7ffe..06767ea164 100644
--- a/src/arm/ti/omap/am335x-cm-t335.dts
+++ b/src/arm/ti/omap/am335x-cm-t335.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
  *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-evmsk.dts b/src/arm/ti/omap/am335x-evmsk.dts
index 57f78846c4..eba888dcd6 100644
--- a/src/arm/ti/omap/am335x-evmsk.dts
+++ b/src/arm/ti/omap/am335x-evmsk.dts
@@ -5,7 +5,7 @@
 
 /*
  * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
+ * https://www.ti.com/tool/tmdssk3358
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-guardian.dts b/src/arm/ti/omap/am335x-guardian.dts
index 205fe0ed73..56e5d954a4 100644
--- a/src/arm/ti/omap/am335x-guardian.dts
+++ b/src/arm/ti/omap/am335x-guardian.dts
@@ -303,8 +303,8 @@
    * For details, see linux-omap mailing list May 2015 thread
    *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
    * In particular, messages:
-   *  http://www.spinics.net/lists/linux-omap/msg118585.html
-   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *  https://www.spinics.net/lists/linux-omap/msg118585.html
+   *  https://www.spinics.net/lists/linux-omap/msg118615.html
    *
    * You can override this later with
    *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
diff --git a/src/arm/ti/omap/am335x-icev2.dts b/src/arm/ti/omap/am335x-icev2.dts
index 3c4228927f..6f0f4fba04 100644
--- a/src/arm/ti/omap/am335x-icev2.dts
+++ b/src/arm/ti/omap/am335x-icev2.dts
@@ -5,7 +5,7 @@
 
 /*
  * AM335x ICE V2 board
- * http://www.ti.com/tool/tmdsice3359
+ * https://www.ti.com/tool/tmdsice3359
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-igep0033.dtsi b/src/arm/ti/omap/am335x-igep0033.dtsi
index e85c33fd42..c7a4a54764 100644
--- a/src/arm/ti/omap/am335x-igep0033.dtsi
+++ b/src/arm/ti/omap/am335x-igep0033.dtsi
@@ -2,7 +2,7 @@
 /*
  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
  *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-myirtech-myc.dtsi b/src/arm/ti/omap/am335x-myirtech-myc.dtsi
index 5845992692..9c9359844a 100644
--- a/src/arm/ti/omap/am335x-myirtech-myc.dtsi
+++ b/src/arm/ti/omap/am335x-myirtech-myc.dtsi
@@ -2,7 +2,7 @@
 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
 
 /* Based on code by myc_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+/* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */
 
 /dts-v1/;
 
diff --git a/src/arm/ti/omap/am335x-myirtech-myd.dts b/src/arm/ti/omap/am335x-myirtech-myd.dts
index d3bba79b93..fd91a3c01a 100644
--- a/src/arm/ti/omap/am335x-myirtech-myd.dts
+++ b/src/arm/ti/omap/am335x-myirtech-myd.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
 /* Based on code by myd_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+/* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */
 
 /dts-v1/;
 
diff --git a/src/arm/ti/omap/am335x-nano.dts b/src/arm/ti/omap/am335x-nano.dts
index a475c0d913..26b5510cb3 100644
--- a/src/arm/ti/omap/am335x-nano.dts
+++ b/src/arm/ti/omap/am335x-nano.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ * Copyright (C) 2013 Newflow Ltd - https://www.newflow.co.uk/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/omap/am335x-netcan-plus-1xx.dts b/src/arm/ti/omap/am335x-netcan-plus-1xx.dts
index f7fad48e36..546e88f8fb 100644
--- a/src/arm/ti/omap/am335x-netcan-plus-1xx.dts
+++ b/src/arm/ti/omap/am335x-netcan-plus-1xx.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-netcom-plus-2xx.dts b/src/arm/ti/omap/am335x-netcom-plus-2xx.dts
index 76751a324a..f66d57bb68 100644
--- a/src/arm/ti/omap/am335x-netcom-plus-2xx.dts
+++ b/src/arm/ti/omap/am335x-netcom-plus-2xx.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-netcom-plus-8xx.dts b/src/arm/ti/omap/am335x-netcom-plus-8xx.dts
index 5a9fcec040..5fb2c629f3 100644
--- a/src/arm/ti/omap/am335x-netcom-plus-8xx.dts
+++ b/src/arm/ti/omap/am335x-netcom-plus-8xx.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-pdu001.dts b/src/arm/ti/omap/am335x-pdu001.dts
index 3c9444e98c..f38f5bff2b 100644
--- a/src/arm/ti/omap/am335x-pdu001.dts
+++ b/src/arm/ti/omap/am335x-pdu001.dts
@@ -3,7 +3,7 @@
  *
  * EETS GmbH PDU001 board device tree file
  *
- * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/
  *
  * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
  *
diff --git a/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts b/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
index 5522759def..7c9f65126c 100644
--- a/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
+++ b/src/arm/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2021 Sancloud Ltd
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts b/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts
index b1b400226d..c6c96f6182 100644
--- a/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts
+++ b/src/arm/ti/omap/am335x-sancloud-bbe-lite.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2021 SanCloud Ltd
  */
 /dts-v1/;
diff --git a/src/arm/ti/omap/am335x-sbc-t335.dts b/src/arm/ti/omap/am335x-sbc-t335.dts
index 596774c847..2841e95d9a 100644
--- a/src/arm/ti/omap/am335x-sbc-t335.dts
+++ b/src/arm/ti/omap/am335x-sbc-t335.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
  *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
  */
 
 #include "am335x-cm-t335.dts"
diff --git a/src/arm/ti/omap/am335x-sl50.dts b/src/arm/ti/omap/am335x-sl50.dts
index 1115c812f6..757ebd96b3 100644
--- a/src/arm/ti/omap/am335x-sl50.dts
+++ b/src/arm/ti/omap/am335x-sl50.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ * Copyright (C) 2015 Toby Churchill - https://www.toby-churchill.com/
+ * url above is defunct
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/omap/am33xx-clocks.dtsi b/src/arm/ti/omap/am33xx-clocks.dtsi
index d34483ae17..99b62c6b4c 100644
--- a/src/arm/ti/omap/am33xx-clocks.dtsi
+++ b/src/arm/ti/omap/am33xx-clocks.dtsi
@@ -108,30 +108,31 @@
 		compatible = "ti,clksel";
 		reg = <0x664>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+		ehrpwm0_tbclk: clock-ehrpwm0-tbclk@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "ehrpwm0_tbclk";
 			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <0>;
 		};
 
-		ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+		ehrpwm1_tbclk: clock-ehrpwm1-tbclk@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "ehrpwm1_tbclk";
 			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <1>;
 		};
 
-		ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+		ehrpwm2_tbclk: clock-ehrpwm2-tbclk@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "ehrpwm2_tbclk";
 			clocks = <&l4ls_gclk>;
-			ti,bit-shift = <2>;
 		};
 	};
 };
@@ -566,17 +567,19 @@
 		compatible = "ti,clksel";
 		reg = <0x52c>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "gfx_fclk_clksel_ck";
 			clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-			ti,bit-shift = <1>;
 		};
 
-		gfx_fck_div_ck: clock-gfx-fck-div {
+		gfx_fck_div_ck: clock-gfx-fck-div@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "gfx_fck_div_ck";
@@ -589,30 +592,32 @@
 		compatible = "ti,clksel";
 		reg = <0x700>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		sysclkout_pre_ck: clock-sysclkout-pre {
+		sysclkout_pre_ck: clock-sysclkout-pre@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "sysclkout_pre_ck";
 			clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
 		};
 
-		clkout2_div_ck: clock-clkout2-div {
+		clkout2_div_ck: clock-clkout2-div@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "clkout2_div_ck";
 			clocks = <&sysclkout_pre_ck>;
-			ti,bit-shift = <3>;
 			ti,max-div = <8>;
 		};
 
-		clkout2_ck: clock-clkout2 {
+		clkout2_ck: clock-clkout2@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "clkout2_ck";
 			clocks = <&clkout2_div_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 };
diff --git a/src/arm/ti/omap/am33xx.dtsi b/src/arm/ti/omap/am33xx.dtsi
index 5b9e01a8aa..989d5a6ede 100644
--- a/src/arm/ti/omap/am33xx.dtsi
+++ b/src/arm/ti/omap/am33xx.dtsi
@@ -640,10 +640,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x1000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <37>;
+			};
 		};
 	};
 };
diff --git a/src/arm/ti/omap/am3517.dtsi b/src/arm/ti/omap/am3517.dtsi
index 77e58e686f..19aad715df 100644
--- a/src/arm/ti/omap/am3517.dtsi
+++ b/src/arm/ti/omap/am3517.dtsi
@@ -162,12 +162,13 @@
 			clock-names = "fck", "ick";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
+			ranges = <0 0x50000000 0x10000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3430-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <21>;
+			};
 		};
 	};
 };
diff --git a/src/arm/ti/omap/am35xx-clocks.dtsi b/src/arm/ti/omap/am35xx-clocks.dtsi
index 0ee7afaa0e..b521139e6f 100644
--- a/src/arm/ti/omap/am35xx-clocks.dtsi
+++ b/src/arm/ti/omap/am35xx-clocks.dtsi
@@ -66,22 +66,23 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ipss_ick: clock-ipss-ick {
+		ipss_ick: clock-ipss-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,am35xx-interface-clock";
 			clock-output-names = "ipss_ick";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		uart4_ick_am35xx: clock-uart4-ick-am35xx {
+		uart4_ick_am35xx: clock-uart4-ick-am35xx@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart4_ick_am35xx";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <23>;
 		};
 	};
 
@@ -101,14 +102,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		uart4_fck_am35xx: clock-uart4-fck-am35xx {
+		uart4_fck_am35xx: clock-uart4-fck-am35xx@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart4_fck_am35xx";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <23>;
 		};
 	};
 };
diff --git a/src/arm/ti/omap/am4372.dtsi b/src/arm/ti/omap/am4372.dtsi
index 9d2c064534..5fd1b380ec 100644
--- a/src/arm/ti/omap/am4372.dtsi
+++ b/src/arm/ti/omap/am4372.dtsi
@@ -719,6 +719,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x1000000>;
+
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 	};
 };
diff --git a/src/arm/ti/omap/am437x-cm-t43.dts b/src/arm/ti/omap/am437x-cm-t43.dts
index 9ec75d03ea..172516a766 100644
--- a/src/arm/ti/omap/am437x-cm-t43.dts
+++ b/src/arm/ti/omap/am437x-cm-t43.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am437x-sbc-t43.dts b/src/arm/ti/omap/am437x-sbc-t43.dts
index 34a5407bee..5ec57dcb06 100644
--- a/src/arm/ti/omap/am437x-sbc-t43.dts
+++ b/src/arm/ti/omap/am437x-sbc-t43.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 #include "am437x-cm-t43.dts"
diff --git a/src/arm/ti/omap/am5729-beagleboneai.dts b/src/arm/ti/omap/am5729-beagleboneai.dts
index 3e834fc7e3..eb1ec85aba 100644
--- a/src/arm/ti/omap/am5729-beagleboneai.dts
+++ b/src/arm/ti/omap/am5729-beagleboneai.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm/ti/omap/am57xx-cl-som-am57x.dts b/src/arm/ti/omap/am57xx-cl-som-am57x.dts
index 4fd831ff20..d6e3152b02 100644
--- a/src/arm/ti/omap/am57xx-cl-som-am57x.dts
+++ b/src/arm/ti/omap/am57xx-cl-som-am57x.dts
@@ -2,7 +2,7 @@
 /*
  * Support for CompuLab CL-SOM-AM57x System-on-Module
  *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
  */
 
diff --git a/src/arm/ti/omap/am57xx-sbc-am57x.dts b/src/arm/ti/omap/am57xx-sbc-am57x.dts
index 363115afb0..64675f4edb 100644
--- a/src/arm/ti/omap/am57xx-sbc-am57x.dts
+++ b/src/arm/ti/omap/am57xx-sbc-am57x.dts
@@ -2,7 +2,7 @@
 /*
  * Support for CompuLab SBC-AM57x single board computer
  *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
  */
 
diff --git a/src/arm/ti/omap/compulab-sb-som.dtsi b/src/arm/ti/omap/compulab-sb-som.dtsi
index f5e6216718..8a8fa1b2b2 100644
--- a/src/arm/ti/omap/compulab-sb-som.dtsi
+++ b/src/arm/ti/omap/compulab-sb-som.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 / {
diff --git a/src/arm/ti/omap/dra7-l4.dtsi b/src/arm/ti/omap/dra7-l4.dtsi
index 5733e3a4ea..6e67d99832 100644
--- a/src/arm/ti/omap/dra7-l4.dtsi
+++ b/src/arm/ti/omap/dra7-l4.dtsi
@@ -80,7 +80,7 @@
 						};
 					};
 
-					phy_gmii_sel: phy-gmii-sel {
+					phy_gmii_sel: phy-gmii-sel@554 {
 						compatible = "ti,dra7xx-phy-gmii-sel";
 						reg = <0x554 0x4>;
 						#phy-cells = <1>;
diff --git a/src/arm/ti/omap/dra7.dtsi b/src/arm/ti/omap/dra7.dtsi
index 6509c742fb..164fa88c45 100644
--- a/src/arm/ti/omap/dra7.dtsi
+++ b/src/arm/ti/omap/dra7.dtsi
@@ -638,7 +638,7 @@
 			};
 		};
 
-		abb_mpu: regulator-abb-mpu {
+		abb_mpu: regulator-abb-mpu@4ae07ddc {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
 			#address-cells = <0>;
@@ -671,7 +671,7 @@
 			>;
 		};
 
-		abb_ivahd: regulator-abb-ivahd {
+		abb_ivahd: regulator-abb-ivahd@4ae07e34 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_ivahd";
 			#address-cells = <0>;
@@ -704,7 +704,7 @@
 			>;
 		};
 
-		abb_dspeve: regulator-abb-dspeve {
+		abb_dspeve: regulator-abb-dspeve@4ae07e30 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_dspeve";
 			#address-cells = <0>;
@@ -737,7 +737,7 @@
 			>;
 		};
 
-		abb_gpu: regulator-abb-gpu {
+		abb_gpu: regulator-abb-gpu@4ae07de4 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_gpu";
 			#address-cells = <0>;
@@ -850,12 +850,19 @@
 					<SYSC_IDLE_SMART>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
 			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
+
+			gpu@0 {
+				compatible = "ti,am5728-gpu", "img,powervr-sgx544";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		crossbar_mpu: crossbar@4a002a48 {
diff --git a/src/arm/ti/omap/dra74x-p.dtsi b/src/arm/ti/omap/dra74x-p.dtsi
index 006189dad7..bb5239ae16 100644
--- a/src/arm/ti/omap/dra74x-p.dtsi
+++ b/src/arm/ti/omap/dra74x-p.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/src/arm/ti/omap/dra7xx-clocks.dtsi b/src/arm/ti/omap/dra7xx-clocks.dtsi
index 04a7a6d1d5..06466d36ca 100644
--- a/src/arm/ti/omap/dra7xx-clocks.dtsi
+++ b/src/arm/ti/omap/dra7xx-clocks.dtsi
@@ -1685,7 +1685,7 @@
 		reg = <0x0558>;
 	};
 
-	sys_32k_ck: clock-sys-32k {
+	sys_32k_ck: clock-sys-32k@6c4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clock-output-names = "sys_32k_ck";
diff --git a/src/arm/ti/omap/omap3430es1-clocks.dtsi b/src/arm/ti/omap/omap3430es1-clocks.dtsi
index 24adfac26b..6e754d265f 100644
--- a/src/arm/ti/omap/omap3430es1-clocks.dtsi
+++ b/src/arm/ti/omap/omap3430es1-clocks.dtsi
@@ -50,30 +50,31 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		d2d_26m_fck: clock-d2d-26m-fck {
+		d2d_26m_fck: clock-d2d-26m-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "d2d_26m_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <3>;
 		};
 
-		fshostusb_fck: clock-fshostusb-fck {
+		fshostusb_fck: clock-fshostusb-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "fshostusb_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <5>;
 		};
 
-		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-no-wait-gate-clock";
 			clock-output-names = "ssi_ssr_gate_fck_3430es1";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -81,23 +82,24 @@
 		compatible = "ti,clksel";
 		reg = <0xa40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-divider-clock";
 			clock-output-names = "ssi_ssr_div_fck_3430es1";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <8>;
 			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
 		};
 
-		usb_l4_div_ick: clock-usb-l4-div-ick {
+		usb_l4_div_ick: clock-usb-l4-div-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-divider-clock";
 			clock-output-names = "usb_l4_div_ick";
 			clocks = <&l4_ick>;
-			ti,bit-shift = <4>;
 			ti,max-div = <1>;
 			ti,index-starts-at-one;
 		};
@@ -121,38 +123,39 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-no-wait-interface-clock";
 			clock-output-names = "hsotgusb_ick_3430es1";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		fac_ick: clock-fac-ick {
+		fac_ick: clock-fac-ick@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "fac_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <8>;
 		};
 
-		ssi_ick: clock-ssi-ick-3430es1 {
+		ssi_ick: clock-ssi-ick-3430es1@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-no-wait-interface-clock";
 			clock-output-names = "ssi_ick_3430es1";
 			clocks = <&ssi_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 
-		usb_l4_gate_ick: clock-usb-l4-gate-ick {
+		usb_l4_gate_ick: clock-usb-l4-gate-ick@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-interface-clock";
 			clock-output-names = "usb_l4_gate_ick";
 			clocks = <&l4_ick>;
-			ti,bit-shift = <5>;
 		};
 	};
 
@@ -174,14 +177,15 @@
 		compatible = "ti,clksel";
 		reg = <0xe00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "dss1_alwon_fck_3430es1";
 			clocks = <&dpll4_m4x2_ck>;
-			ti,bit-shift = <0>;
 			ti,set-rate-parent;
 		};
 	};
diff --git a/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi b/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi
index 8374532f20..ca6372711b 100644
--- a/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi
+++ b/src/arm/ti/omap/omap34xx-omap36xx-clocks.dtsi
@@ -17,46 +17,47 @@
 		compatible = "ti,clksel";
 		reg = <0xa14>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		aes1_ick: clock-aes1-ick {
+		aes1_ick: clock-aes1-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "aes1_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <3>;
 		};
 
-		rng_ick: clock-rng-ick {
+		rng_ick: clock-rng-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "rng_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <2>;
 		};
 
-		sha11_ick: clock-sha11-ick {
+		sha11_ick: clock-sha11-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "sha11_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <1>;
 		};
 
-		des1_ick: clock-des1-ick {
+		des1_ick: clock-des1-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "des1_ick";
 			clocks = <&security_l4_ick2>;
-			ti,bit-shift = <0>;
 		};
 
-		pka_ick: clock-pka-ick {
+		pka_ick: clock-pka-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "pka_ick";
 			clocks = <&security_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 	};
 
@@ -65,23 +66,24 @@
 		compatible = "ti,clksel";
 		reg = <0xf00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		cam_mclk: clock-cam-mclk {
+		cam_mclk: clock-cam-mclk@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "cam_mclk";
 			clocks = <&dpll4_m5x2_ck>;
-			ti,bit-shift = <0>;
 			ti,set-rate-parent;
 		};
 
-		csi2_96m_fck: clock-csi2-96m-fck {
+		csi2_96m_fck: clock-csi2-96m-fck@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "csi2_96m_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <1>;
 		};
 	};
 
@@ -105,46 +107,47 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		icr_ick: clock-icr-ick {
+		icr_ick: clock-icr-ick@29 {
+			reg = <29>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "icr_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <29>;
 		};
 
-		des2_ick: clock-des2-ick {
+		des2_ick: clock-des2-ick@26 {
+			reg = <26>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "des2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <26>;
 		};
 
-		mspro_ick: clock-mspro-ick {
+		mspro_ick: clock-mspro-ick@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mspro_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <23>;
 		};
 
-		mailboxes_ick: clock-mailboxes-ick {
+		mailboxes_ick: clock-mailboxes-ick@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mailboxes_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <7>;
 		};
 
-		sad2d_ick: clock-sad2d-ick {
+		sad2d_ick: clock-sad2d-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "sad2d_ick";
 			clocks = <&l3_ick>;
-			ti,bit-shift = <3>;
 		};
 	};
 
@@ -160,22 +163,23 @@
 		compatible = "ti,clksel";
 		reg = <0xc00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		sr1_fck: clock-sr1-fck {
+		sr1_fck: clock-sr1-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "sr1_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		sr2_fck: clock-sr2-fck {
+		sr2_fck: clock-sr2-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "sr2_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 
@@ -228,22 +232,23 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		modem_fck: clock-modem-fck {
+		modem_fck: clock-modem-fck@31 {
+			reg = <31>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "modem_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <31>;
 		};
 
-		mspro_fck: clock-mspro-fck {
+		mspro_fck: clock-mspro-fck@23 {
+			reg = <23>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mspro_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <23>;
 		};
 	};
 
@@ -252,14 +257,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa18>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#ssize-cells = <0>;
 
-		mad2d_ick: clock-mad2d-ick {
+		mad2d_ick: clock-mad2d-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mad2d_ick";
 			clocks = <&l3_ick>;
-			ti,bit-shift = <3>;
 		};
 	};
 
diff --git a/src/arm/ti/omap/omap34xx.dtsi b/src/arm/ti/omap/omap34xx.dtsi
index fc7233ac18..acdd0ee344 100644
--- a/src/arm/ti/omap/omap34xx.dtsi
+++ b/src/arm/ti/omap/omap34xx.dtsi
@@ -164,12 +164,13 @@
 			clock-names = "fck", "ick";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
+			ranges = <0 0x50000000 0x10000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3430-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <21>;
+			};
 		};
 	};
 
diff --git a/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index dcc5cfcd1f..656cf80f87 100644
--- a/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/src/arm/ti/omap/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -138,14 +138,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa18>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usbtll_ick: clock-usbtll-ick {
+		usbtll_ick: clock-usbtll-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "usbtll_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <2>;
 		};
 	};
 
@@ -153,14 +154,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mmchs3_ick: clock-mmchs3-ick {
+		mmchs3_ick: clock-mmchs3-ick@30 {
+			reg = <30>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mmchs3_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <30>;
 		};
 	};
 
@@ -168,14 +170,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mmchs3_fck: clock-mmchs3-fck {
+		mmchs3_fck: clock-mmchs3-fck@30 {
+			reg = <30>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mmchs3_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <30>;
 		};
 	};
 
@@ -183,14 +186,15 @@
 		compatible = "ti,clksel";
 		reg = <0xe00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,dss-gate-clock";
 			clock-output-names = "dss1_alwon_fck_3430es2";
 			clocks = <&dpll4_m4x2_ck>;
-			ti,bit-shift = <0>;
 			ti,set-rate-parent;
 		};
 	};
diff --git a/src/arm/ti/omap/omap36xx-clocks.dtsi b/src/arm/ti/omap/omap36xx-clocks.dtsi
index c5fdb2bd76..1e90f2b1ef 100644
--- a/src/arm/ti/omap/omap36xx-clocks.dtsi
+++ b/src/arm/ti/omap/omap36xx-clocks.dtsi
@@ -62,14 +62,15 @@
 		compatible = "ti,clksel";
 		reg = <0x1000>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		uart4_fck: clock-uart4-fck {
+		uart4_fck: clock-uart4-fck@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart4_fck";
 			clocks = <&per_48m_fck>;
-			ti,bit-shift = <18>;
 		};
 	};
 };
diff --git a/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi b/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
index c94eb86d3d..798acb839d 100644
--- a/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/src/arm/ti/omap/omap36xx-omap3430es2plus-clocks.dtsi
@@ -9,14 +9,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-no-wait-gate-clock";
 			clock-output-names = "ssi_ssr_gate_fck_3430es2";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -24,14 +25,15 @@
 		compatible = "ti,clksel";
 		reg = <0xa40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-divider-clock";
 			clock-output-names = "ssi_ssr_div_fck_3430es2";
 			clocks = <&corex2_fck>;
-			ti,bit-shift = <8>;
 			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
 		};
 	};
@@ -54,22 +56,23 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-hsotgusb-interface-clock";
 			clock-output-names = "hsotgusb_ick_3430es2";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		ssi_ick: clock-ssi-ick-3430es2 {
+		ssi_ick: clock-ssi-ick-3430es2@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-ssi-interface-clock";
 			clock-output-names = "ssi_ick_3430es2";
 			clocks = <&ssi_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -85,14 +88,15 @@
 		compatible = "ti,clksel";
 		reg = <0xc00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usim_gate_fck: clock-usim-gate-fck {
+		usim_gate_fck: clock-usim-gate-fck@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "usim_gate_fck";
 			clocks = <&omap_96m_fck>;
-			ti,bit-shift = <9>;
 		};
 	};
 
@@ -172,14 +176,15 @@
 		compatible = "ti,clksel";
 		reg = <0xc40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usim_mux_fck: clock-usim-mux-fck {
+		usim_mux_fck: clock-usim-mux-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "usim_mux_fck";
 			clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-			ti,bit-shift = <3>;
 			ti,index-starts-at-one;
 		};
 	};
@@ -194,14 +199,15 @@
 		compatible = "ti,clksel";
 		reg = <0xc10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		usim_ick: clock-usim-ick {
+		usim_ick: clock-usim-ick@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "usim_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <9>;
 		};
 	};
 };
diff --git a/src/arm/ti/omap/omap36xx.dtsi b/src/arm/ti/omap/omap36xx.dtsi
index e6d8070c1b..c3d79ecd56 100644
--- a/src/arm/ti/omap/omap36xx.dtsi
+++ b/src/arm/ti/omap/omap36xx.dtsi
@@ -211,10 +211,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x50000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <21>;
+			};
 		};
 	};
 
diff --git a/src/arm/ti/omap/omap3xxx-clocks.dtsi b/src/arm/ti/omap/omap3xxx-clocks.dtsi
index 2e13ca11ce..901ee79a66 100644
--- a/src/arm/ti/omap/omap3xxx-clocks.dtsi
+++ b/src/arm/ti/omap/omap3xxx-clocks.dtsi
@@ -83,29 +83,31 @@
 		compatible = "ti,clksel";
 		reg = <0x68>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+		mcbsp5_mux_fck: clock-mcbsp5-mux-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp5_mux_fck";
 			clocks = <&core_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <4>;
 		};
 
-		mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+		mcbsp3_mux_fck: clock-mcbsp3-mux-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp3_mux_fck";
 			clocks = <&per_96m_fck>, <&mcbsp_clks>;
 		};
 
-		mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+		mcbsp4_mux_fck: clock-mcbsp4-mux-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp4_mux_fck";
 			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <2>;
 		};
 	};
 
@@ -120,22 +122,23 @@
 		compatible = "ti,clksel";
 		reg = <0x4>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+		mcbsp1_mux_fck: clock-mcbsp1-mux-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp1_mux_fck";
 			clocks = <&core_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <2>;
 		};
 
-		mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+		mcbsp2_mux_fck: clock-mcbsp2-mux-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "mcbsp2_mux_fck";
 			clocks = <&per_96m_fck>, <&mcbsp_clks>;
-			ti,bit-shift = <6>;
 		};
 	};
 
@@ -259,79 +262,81 @@
 		compatible = "ti,clksel";
 		reg = <0x1140>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dpll3_m3_ck: clock-dpll3-m3 {
+		dpll3_m3_ck: clock-dpll3-m3@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll3_m3_ck";
 			clocks = <&dpll3_ck>;
-			ti,bit-shift = <16>;
 			ti,max-div = <31>;
 			ti,index-starts-at-one;
 		};
 
-		dpll4_m6_ck: clock-dpll4-m6 {
+		dpll4_m6_ck: clock-dpll4-m6@24 {
+			reg = <24>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll4_m6_ck";
 			clocks = <&dpll4_ck>;
-			ti,bit-shift = <24>;
 			ti,max-div = <63>;
 			ti,index-starts-at-one;
 		};
 
-		emu_src_mux_ck: clock-emu-src-mux {
+		emu_src_mux_ck: clock-emu-src-mux@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "emu_src_mux_ck";
 			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
 		};
 
-		pclk_fck: clock-pclk-fck {
+		pclk_fck: clock-pclk-fck@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "pclk_fck";
 			clocks = <&emu_src_ck>;
-			ti,bit-shift = <8>;
 			ti,max-div = <7>;
 			ti,index-starts-at-one;
 		};
 
-		pclkx2_fck: clock-pclkx2-fck {
+		pclkx2_fck: clock-pclkx2-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "pclkx2_fck";
 			clocks = <&emu_src_ck>;
-			ti,bit-shift = <6>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		atclk_fck: clock-atclk-fck {
+		atclk_fck: clock-atclk-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "atclk_fck";
 			clocks = <&emu_src_ck>;
-			ti,bit-shift = <4>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		traceclk_src_fck: clock-traceclk-src-fck {
+		traceclk_src_fck: clock-traceclk-src-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "traceclk_src_fck";
 			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-			ti,bit-shift = <2>;
 		};
 
-		traceclk_fck: clock-traceclk-fck {
+		traceclk_fck: clock-traceclk-fck@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "traceclk_fck";
 			clocks = <&traceclk_src_fck>;
-			ti,bit-shift = <11>;
 			ti,max-div = <7>;
 			ti,index-starts-at-one;
 		};
@@ -429,40 +434,41 @@
 		compatible = "ti,clksel";
 		reg = <0xd40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dpll3_m2_ck: clock-dpll3-m2 {
+		dpll3_m2_ck: clock-dpll3-m2@27 {
+			reg = <27>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll3_m2_ck";
 			clocks = <&dpll3_ck>;
-			ti,bit-shift = <27>;
 			ti,max-div = <31>;
 			ti,index-starts-at-one;
 		};
 
-		omap_96m_fck: clock-omap-96m-fck {
+		omap_96m_fck: clock-omap-96m-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "omap_96m_fck";
 			clocks = <&cm_96m_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		omap_54m_fck: clock-omap-54m-fck {
+		omap_54m_fck: clock-omap-54m-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "omap_54m_fck";
 			clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-			ti,bit-shift = <5>;
 		};
 
-		omap_48m_fck: clock-omap-48m-fck {
+		omap_48m_fck: clock-omap-48m-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,mux-clock";
 			clock-output-names = "omap_48m_fck";
 			clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-			ti,bit-shift = <3>;
 		};
 	};
 
@@ -471,19 +477,21 @@
 		compatible = "ti,clksel";
 		reg = <0xe40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		dpll4_m3_ck: clock-dpll4-m3 {
+		dpll4_m3_ck: clock-dpll4-m3@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll4_m3_ck";
 			clocks = <&dpll4_ck>;
-			ti,bit-shift = <8>;
 			ti,max-div = <32>;
 			ti,index-starts-at-one;
 		};
 
-		dpll4_m4_ck: clock-dpll4-m4 {
+		dpll4_m4_ck: clock-dpll4-m4@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "dpll4_m4_ck";
@@ -603,29 +611,31 @@
 		compatible = "ti,clksel";
 		reg = <0xd70>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		clkout2_src_gate_ck: clock-clkout2-src-gate {
+		clkout2_src_gate_ck: clock-clkout2-src-gate@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-no-wait-gate-clock";
 			clock-output-names = "clkout2_src_gate_ck";
 			clocks = <&core_ck>;
-			ti,bit-shift = <7>;
 		};
 
-		clkout2_src_mux_ck: clock-clkout2-src-mux {
+		clkout2_src_mux_ck: clock-clkout2-src-mux@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "clkout2_src_mux_ck";
 			clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
 		};
 
-		sys_clkout2: clock-sys-clkout2 {
+		sys_clkout2: clock-sys-clkout2@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "sys_clkout2";
 			clocks = <&clkout2_src_ck>;
-			ti,bit-shift = <3>;
 			ti,max-div = <64>;
 			ti,index-power-of-two;
 		};
@@ -666,9 +676,11 @@
 		compatible = "ti,clksel";
 		reg = <0xa40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		l3_ick: clock-l3-ick {
+		l3_ick: clock-l3-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "l3_ick";
@@ -677,30 +689,30 @@
 			ti,index-starts-at-one;
 		};
 
-		l4_ick: clock-l4-ick {
+		l4_ick: clock-l4-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "l4_ick";
 			clocks = <&l3_ick>;
-			ti,bit-shift = <2>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		gpt10_mux_fck: clock-gpt10-mux-fck {
+		gpt10_mux_fck: clock-gpt10-mux-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt10_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt11_mux_fck: clock-gpt11-mux-fck {
+		gpt11_mux_fck: clock-gpt11-mux-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt11_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 
@@ -709,19 +721,21 @@
 		compatible = "ti,clksel";
 		reg = <0xc40>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		rm_ick: clock-rm-ick {
+		rm_ick: clock-rm-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,divider-clock";
 			clock-output-names = "rm_ick";
 			clocks = <&l4_ick>;
-			ti,bit-shift = <1>;
 			ti,max-div = <3>;
 			ti,index-starts-at-one;
 		};
 
-		gpt1_mux_fck: clock-gpt1-mux-fck {
+		gpt1_mux_fck: clock-gpt1-mux-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt1_mux_fck";
@@ -734,134 +748,135 @@
 		compatible = "ti,clksel";
 		reg = <0xa00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpt10_gate_fck: clock-gpt10-gate-fck {
+		gpt10_gate_fck: clock-gpt10-gate-fck@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt10_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <11>;
 		};
 
-		gpt11_gate_fck: clock-gpt11-gate-fck {
+		gpt11_gate_fck: clock-gpt11-gate-fck@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt11_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <12>;
 		};
 
-		mmchs2_fck: clock-mmchs2-fck {
+		mmchs2_fck: clock-mmchs2-fck@25 {
+			reg = <25>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mmchs2_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <25>;
 		};
 
-		mmchs1_fck: clock-mmchs1-fck {
+		mmchs1_fck: clock-mmchs1-fck@24 {
+			reg = <24>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mmchs1_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <24>;
 		};
 
-		i2c3_fck: clock-i2c3-fck {
+		i2c3_fck: clock-i2c3-fck@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "i2c3_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <17>;
 		};
 
-		i2c2_fck: clock-i2c2-fck {
+		i2c2_fck: clock-i2c2-fck@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "i2c2_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <16>;
 		};
 
-		i2c1_fck: clock-i2c1-fck {
+		i2c1_fck: clock-i2c1-fck@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "i2c1_fck";
 			clocks = <&core_96m_fck>;
-			ti,bit-shift = <15>;
 		};
 
-		mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+		mcbsp5_gate_fck: clock-mcbsp5-gate-fck@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp5_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <10>;
 		};
 
-		mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+		mcbsp1_gate_fck: clock-mcbsp1-gate-fck@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp1_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <9>;
 		};
 
-		mcspi4_fck: clock-mcspi4-fck {
+		mcspi4_fck: clock-mcspi4-fck@21 {
+			reg = <21>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi4_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <21>;
 		};
 
-		mcspi3_fck: clock-mcspi3-fck {
+		mcspi3_fck: clock-mcspi3-fck@20 {
+			reg = <20>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi3_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <20>;
 		};
 
-		mcspi2_fck: clock-mcspi2-fck {
+		mcspi2_fck: clock-mcspi2-fck@19 {
+			reg = <19>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi2_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <19>;
 		};
 
-		mcspi1_fck: clock-mcspi1-fck {
+		mcspi1_fck: clock-mcspi1-fck@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "mcspi1_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <18>;
 		};
 
-		uart2_fck: clock-uart2-fck {
+		uart2_fck: clock-uart2-fck@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart2_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <14>;
 		};
 
-		uart1_fck: clock-uart1-fck {
+		uart1_fck: clock-uart1-fck@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart1_fck";
 			clocks = <&core_48m_fck>;
-			ti,bit-shift = <13>;
 		};
 
-		hdq_fck: clock-hdq-fck {
+		hdq_fck: clock-hdq-fck@22 {
+			reg = <22>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "hdq_fck";
 			clocks = <&core_12m_fck>;
-			ti,bit-shift = <22>;
 		};
 	};
 
@@ -914,166 +929,167 @@
 		compatible = "ti,clksel";
 		reg = <0xa10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		sdrc_ick: clock-sdrc-ick {
+		sdrc_ick: clock-sdrc-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "sdrc_ick";
 			clocks = <&core_l3_ick>;
-			ti,bit-shift = <1>;
 		};
 
-		mmchs2_ick: clock-mmchs2-ick {
+		mmchs2_ick: clock-mmchs2-ick@25 {
+			reg = <25>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mmchs2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <25>;
 		};
 
-		mmchs1_ick: clock-mmchs1-ick {
+		mmchs1_ick: clock-mmchs1-ick@24 {
+			reg = <24>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mmchs1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <24>;
 		};
 
-		hdq_ick: clock-hdq-ick {
+		hdq_ick: clock-hdq-ick@22 {
+			reg = <22>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "hdq_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <22>;
 		};
 
-		mcspi4_ick: clock-mcspi4-ick {
+		mcspi4_ick: clock-mcspi4-ick@21 {
+			reg = <21>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi4_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <21>;
 		};
 
-		mcspi3_ick: clock-mcspi3-ick {
+		mcspi3_ick: clock-mcspi3-ick@20 {
+			reg = <20>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi3_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <20>;
 		};
 
-		mcspi2_ick: clock-mcspi2-ick {
+		mcspi2_ick: clock-mcspi2-ick@19 {
+			reg = <19>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <19>;
 		};
 
-		mcspi1_ick: clock-mcspi1-ick {
+		mcspi1_ick: clock-mcspi1-ick@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcspi1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <18>;
 		};
 
-		i2c3_ick: clock-i2c3-ick {
+		i2c3_ick: clock-i2c3-ick@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "i2c3_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <17>;
 		};
 
-		i2c2_ick: clock-i2c2-ick {
+		i2c2_ick: clock-i2c2-ick@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "i2c2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <16>;
 		};
 
-		i2c1_ick: clock-i2c1-ick {
+		i2c1_ick: clock-i2c1-ick@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "i2c1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <15>;
 		};
 
-		uart2_ick: clock-uart2-ick {
+		uart2_ick: clock-uart2-ick@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <14>;
 		};
 
-		uart1_ick: clock-uart1-ick {
+		uart1_ick: clock-uart1-ick@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <13>;
 		};
 
-		gpt11_ick: clock-gpt11-ick {
+		gpt11_ick: clock-gpt11-ick@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt11_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <12>;
 		};
 
-		gpt10_ick: clock-gpt10-ick {
+		gpt10_ick: clock-gpt10-ick@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt10_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <11>;
 		};
 
-		mcbsp5_ick: clock-mcbsp5-ick {
+		mcbsp5_ick: clock-mcbsp5-ick@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp5_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <10>;
 		};
 
-		mcbsp1_ick: clock-mcbsp1-ick {
+		mcbsp1_ick: clock-mcbsp1-ick@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp1_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <9>;
 		};
 
-		omapctrl_ick: clock-omapctrl-ick {
+		omapctrl_ick: clock-omapctrl-ick@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "omapctrl_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <6>;
 		};
 
-		aes2_ick: clock-aes2-ick {
+		aes2_ick: clock-aes2-ick@28 {
+			reg = <28>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "aes2_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <28>;
 		};
 
-		sha12_ick: clock-sha12-ick {
+		sha12_ick: clock-sha12-ick@27 {
+			reg = <27>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "sha12_ick";
 			clocks = <&core_l4_ick>;
-			ti,bit-shift = <27>;
 		};
 	};
 
@@ -1136,30 +1152,31 @@
 		compatible = "ti,clksel";
 		reg = <0xc00>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpt1_gate_fck: clock-gpt1-gate-fck {
+		gpt1_gate_fck: clock-gpt1-gate-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt1_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <0>;
 		};
 
-		gpio1_dbck: clock-gpio1-dbck {
+		gpio1_dbck: clock-gpio1-dbck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio1_dbck";
 			clocks = <&wkup_32k_fck>;
-			ti,bit-shift = <3>;
 		};
 
-		wdt2_fck: clock-wdt2-fck {
+		wdt2_fck: clock-wdt2-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "wdt2_fck";
 			clocks = <&wkup_32k_fck>;
-			ti,bit-shift = <5>;
 		};
 	};
 
@@ -1182,54 +1199,55 @@
 		compatible = "ti,clksel";
 		reg = <0xc10>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		wdt2_ick: clock-wdt2-ick {
+		wdt2_ick: clock-wdt2-ick@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "wdt2_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <5>;
 		};
 
-		wdt1_ick: clock-wdt1-ick {
+		wdt1_ick: clock-wdt1-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "wdt1_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		gpio1_ick: clock-gpio1-ick {
+		gpio1_ick: clock-gpio1-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio1_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <3>;
 		};
 
-		omap_32ksync_ick: clock-omap-32ksync-ick {
+		omap_32ksync_ick: clock-omap-32ksync-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "omap_32ksync_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <2>;
 		};
 
-		gpt12_ick: clock-gpt12-ick {
+		gpt12_ick: clock-gpt12-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt12_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <1>;
 		};
 
-		gpt1_ick: clock-gpt1-ick {
+		gpt1_ick: clock-gpt1-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt1_ick";
 			clocks = <&wkup_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 	};
 
@@ -1254,150 +1272,151 @@
 		compatible = "ti,clksel";
 		reg = <0x1000>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		uart3_fck: clock-uart3-fck {
+		uart3_fck: clock-uart3-fck@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "uart3_fck";
 			clocks = <&per_48m_fck>;
-			ti,bit-shift = <11>;
 		};
 
-		gpt2_gate_fck: clock-gpt2-gate-fck {
+		gpt2_gate_fck: clock-gpt2-gate-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt2_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <3>;
 		};
 
-		gpt3_gate_fck: clock-gpt3-gate-fck {
+		gpt3_gate_fck: clock-gpt3-gate-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt3_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <4>;
 		};
 
-		gpt4_gate_fck: clock-gpt4-gate-fck {
+		gpt4_gate_fck: clock-gpt4-gate-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt4_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <5>;
 		};
 
-		gpt5_gate_fck: clock-gpt5-gate-fck {
+		gpt5_gate_fck: clock-gpt5-gate-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt5_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt6_gate_fck: clock-gpt6-gate-fck {
+		gpt6_gate_fck: clock-gpt6-gate-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt6_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 
-		gpt7_gate_fck: clock-gpt7-gate-fck {
+		gpt7_gate_fck: clock-gpt7-gate-fck@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt7_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <8>;
 		};
 
-		gpt8_gate_fck: clock-gpt8-gate-fck {
+		gpt8_gate_fck: clock-gpt8-gate-fck@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt8_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <9>;
 		};
 
-		gpt9_gate_fck: clock-gpt9-gate-fck {
+		gpt9_gate_fck: clock-gpt9-gate-fck@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "gpt9_gate_fck";
 			clocks = <&sys_ck>;
-			ti,bit-shift = <10>;
 		};
 
-		gpio6_dbck: clock-gpio6-dbck {
+		gpio6_dbck: clock-gpio6-dbck@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio6_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <17>;
 		};
 
-		gpio5_dbck: clock-gpio5-dbck {
+		gpio5_dbck: clock-gpio5-dbck@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio5_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <16>;
 		};
 
-		gpio4_dbck: clock-gpio4-dbck {
+		gpio4_dbck: clock-gpio4-dbck@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio4_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <15>;
 		};
 
-		gpio3_dbck: clock-gpio3-dbck {
+		gpio3_dbck: clock-gpio3-dbck@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio3_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <14>;
 		};
 
-		gpio2_dbck: clock-gpio2-dbck {
+		gpio2_dbck: clock-gpio2-dbck@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,gate-clock";
 			clock-output-names = "gpio2_dbck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <13>;
 		};
 
-		wdt3_fck: clock-wdt3-fck {
+		wdt3_fck: clock-wdt3-fck@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,wait-gate-clock";
 			clock-output-names = "wdt3_fck";
 			clocks = <&per_32k_alwon_fck>;
-			ti,bit-shift = <12>;
 		};
 
-		mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+		mcbsp2_gate_fck: clock-mcbsp2-gate-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp2_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <0>;
 		};
 
-		mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+		mcbsp3_gate_fck: clock-mcbsp3-gate-fck@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp3_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <1>;
 		};
 
-		mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+		mcbsp4_gate_fck: clock-mcbsp4-gate-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-gate-clock";
 			clock-output-names = "mcbsp4_gate_fck";
 			clocks = <&mcbsp_clks>;
-			ti,bit-shift = <2>;
 		};
 	};
 
@@ -1406,69 +1425,71 @@
 		compatible = "ti,clksel";
 		reg = <0x1040>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpt2_mux_fck: clock-gpt2-mux-fck {
+		gpt2_mux_fck: clock-gpt2-mux-fck@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt2_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
 		};
 
-		gpt3_mux_fck: clock-gpt3-mux-fck {
+		gpt3_mux_fck: clock-gpt3-mux-fck@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt3_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <1>;
 		};
 
-		gpt4_mux_fck: clock-gpt4-mux-fck {
+		gpt4_mux_fck: clock-gpt4-mux-fck@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt4_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <2>;
 		};
 
-		gpt5_mux_fck: clock-gpt5-mux-fck {
+		gpt5_mux_fck: clock-gpt5-mux-fck@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt5_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <3>;
 		};
 
-		gpt6_mux_fck: clock-gpt6-mux-fck {
+		gpt6_mux_fck: clock-gpt6-mux-fck@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt6_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <4>;
 		};
 
-		gpt7_mux_fck: clock-gpt7-mux-fck {
+		gpt7_mux_fck: clock-gpt7-mux-fck@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt7_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <5>;
 		};
 
-		gpt8_mux_fck: clock-gpt8-mux-fck {
+		gpt8_mux_fck: clock-gpt8-mux-fck@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt8_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt9_mux_fck: clock-gpt9-mux-fck {
+		gpt9_mux_fck: clock-gpt9-mux-fck@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,composite-mux-clock";
 			clock-output-names = "gpt9_mux_fck";
 			clocks = <&omap_32k_fck>, <&sys_ck>;
-			ti,bit-shift = <7>;
 		};
 	};
 
@@ -1541,158 +1562,159 @@
 		compatible = "ti,clksel";
 		reg = <0x1010>;
 		#clock-cells = <2>;
-		#address-cells = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		gpio6_ick: clock-gpio6-ick {
+		gpio6_ick: clock-gpio6-ick@17 {
+			reg = <17>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio6_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <17>;
 		};
 
-		gpio5_ick: clock-gpio5-ick {
+		gpio5_ick: clock-gpio5-ick@16 {
+			reg = <16>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio5_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <16>;
 		};
 
-		gpio4_ick: clock-gpio4-ick {
+		gpio4_ick: clock-gpio4-ick@15 {
+			reg = <15>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <15>;
 		};
 
-		gpio3_ick: clock-gpio3-ick {
+		gpio3_ick: clock-gpio3-ick@14 {
+			reg = <14>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <14>;
 		};
 
-		gpio2_ick: clock-gpio2-ick {
+		gpio2_ick: clock-gpio2-ick@13 {
+			reg = <13>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpio2_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <13>;
 		};
 
-		wdt3_ick: clock-wdt3-ick {
+		wdt3_ick: clock-wdt3-ick@12 {
+			reg = <12>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "wdt3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <12>;
 		};
 
-		uart3_ick: clock-uart3-ick {
+		uart3_ick: clock-uart3-ick@11 {
+			reg = <11>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <11>;
 		};
 
-		uart4_ick: clock-uart4-ick {
+		uart4_ick: clock-uart4-ick@18 {
+			reg = <18>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "uart4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <18>;
 		};
 
-		gpt9_ick: clock-gpt9-ick {
+		gpt9_ick: clock-gpt9-ick@10 {
+			reg = <10>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt9_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <10>;
 		};
 
-		gpt8_ick: clock-gpt8-ick {
+		gpt8_ick: clock-gpt8-ick@9 {
+			reg = <9>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt8_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <9>;
 		};
 
-		gpt7_ick: clock-gpt7-ick {
+		gpt7_ick: clock-gpt7-ick@8 {
+			reg = <8>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt7_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <8>;
 		};
 
-		gpt6_ick: clock-gpt6-ick {
+		gpt6_ick: clock-gpt6-ick@7 {
+			reg = <7>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt6_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <7>;
 		};
 
-		gpt5_ick: clock-gpt5-ick {
+		gpt5_ick: clock-gpt5-ick@6 {
+			reg = <6>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt5_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <6>;
 		};
 
-		gpt4_ick: clock-gpt4-ick {
+		gpt4_ick: clock-gpt4-ick@5 {
+			reg = <5>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <5>;
 		};
 
-		gpt3_ick: clock-gpt3-ick {
+		gpt3_ick: clock-gpt3-ick@4 {
+			reg = <4>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <4>;
 		};
 
-		gpt2_ick: clock-gpt2-ick {
+		gpt2_ick: clock-gpt2-ick@3 {
+			reg = <3>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "gpt2_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <3>;
 		};
 
-		mcbsp2_ick: clock-mcbsp2-ick {
+		mcbsp2_ick: clock-mcbsp2-ick@0 {
+			reg = <0>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp2_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <0>;
 		};
 
-		mcbsp3_ick: clock-mcbsp3-ick {
+		mcbsp3_ick: clock-mcbsp3-ick@1 {
+			reg = <1>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp3_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <1>;
 		};
 
-		mcbsp4_ick: clock-mcbsp4-ick {
+		mcbsp4_ick: clock-mcbsp4-ick@2 {
+			reg = <2>;
 			#clock-cells = <0>;
 			compatible = "ti,omap3-interface-clock";
 			clock-output-names = "mcbsp4_ick";
 			clocks = <&per_l4_ick>;
-			ti,bit-shift = <2>;
 		};
 	};
 
diff --git a/src/arm/ti/omap/omap4-epson-embt2ws.dts b/src/arm/ti/omap/omap4-epson-embt2ws.dts
index 24f7d0285f..339e52ba36 100644
--- a/src/arm/ti/omap/omap4-epson-embt2ws.dts
+++ b/src/arm/ti/omap/omap4-epson-embt2ws.dts
@@ -85,6 +85,7 @@
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		system-power-controller;
 
 		rtc {
 			compatible = "ti,twl4030-rtc";
diff --git a/src/arm/ti/omap/omap4-panda-common.dtsi b/src/arm/ti/omap/omap4-panda-common.dtsi
index f528511c25..97706d6296 100644
--- a/src/arm/ti/omap/omap4-panda-common.dtsi
+++ b/src/arm/ti/omap/omap4-panda-common.dtsi
@@ -408,6 +408,7 @@
 		reg = <0x48>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		system-power-controller;
 	};
 
 	twl6040: twl@4b {
diff --git a/src/arm/ti/omap/omap4-sdp.dts b/src/arm/ti/omap/omap4-sdp.dts
index b2cb93edbc..b535d24c61 100644
--- a/src/arm/ti/omap/omap4-sdp.dts
+++ b/src/arm/ti/omap/omap4-sdp.dts
@@ -439,7 +439,7 @@
 
 	/*
 	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 * https://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf (defunct)
 	 */
 	bh1780@29 {
 		compatible = "rohm,bh1780";
diff --git a/src/arm/ti/omap/omap4.dtsi b/src/arm/ti/omap/omap4.dtsi
index 2bbff9032b..559b2bfe4c 100644
--- a/src/arm/ti/omap/omap4.dtsi
+++ b/src/arm/ti/omap/omap4.dtsi
@@ -501,10 +501,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap4430-gpu", "img,powervr-sgx540";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		/*
diff --git a/src/arm/ti/omap/omap5-igep0050.dts b/src/arm/ti/omap/omap5-igep0050.dts
index d4ca2e3a14..0368e32f67 100644
--- a/src/arm/ti/omap/omap5-igep0050.dts
+++ b/src/arm/ti/omap/omap5-igep0050.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz/
  */
 /dts-v1/;
 
diff --git a/src/arm/ti/omap/omap5.dtsi b/src/arm/ti/omap/omap5.dtsi
index bac6fa8387..6a66214ad0 100644
--- a/src/arm/ti/omap/omap5.dtsi
+++ b/src/arm/ti/omap/omap5.dtsi
@@ -453,10 +453,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap5432-gpu", "img,powervr-sgx544";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@58000000 {
diff --git a/src/arm/ti/omap/twl4030.dtsi b/src/arm/ti/omap/twl4030.dtsi
index 93e07c1878..a5d9c57383 100644
--- a/src/arm/ti/omap/twl4030.dtsi
+++ b/src/arm/ti/omap/twl4030.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/src/arm/ti/omap/twl6030.dtsi b/src/arm/ti/omap/twl6030.dtsi
index 9d588cfaa5..8da969035c 100644
--- a/src/arm/ti/omap/twl6030.dtsi
+++ b/src/arm/ti/omap/twl6030.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
  * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
  */
 &twl {
 	compatible = "ti,twl6030";
diff --git a/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
index 9ec49ac2f6..381d58cea0 100644
--- a/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
@@ -291,6 +291,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/src/arm64/allwinner/sun50i-h6-tanix.dtsi b/src/arm64/allwinner/sun50i-h6-tanix.dtsi
index 4903d63581..855b7d43bc 100644
--- a/src/arm64/allwinner/sun50i-h6-tanix.dtsi
+++ b/src/arm64/allwinner/sun50i-h6-tanix.dtsi
@@ -166,6 +166,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/src/arm64/allwinner/sun50i-h6.dtsi b/src/arm64/allwinner/sun50i-h6.dtsi
index ca1d287a0a..d11e5041ba 100644
--- a/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/src/arm64/allwinner/sun50i-h6.dtsi
@@ -406,6 +406,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +656,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git a/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
index dbce61b355..4bfb52609c 100644
--- a/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
+++ b/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
  */
diff --git a/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
index 1fed2b46cf..af421ba24c 100644
--- a/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/src/arm64/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
  */
@@ -93,7 +93,7 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 
-		regulators{
+		regulators {
 			reg_dcdc1: dcdc1 {
 				regulator-name = "vdd-gpu-sys";
 				regulator-min-microvolt = <810000>;
diff --git a/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts b/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts
index 832f08b2b2..ff84a37944 100644
--- a/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts
+++ b/src/arm64/allwinner/sun50i-h616-bigtreetech-pi.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
  */
diff --git a/src/arm64/allwinner/sun50i-h616.dtsi b/src/arm64/allwinner/sun50i-h616.dtsi
index d549d277d9..b2e85e52d1 100644
--- a/src/arm64/allwinner/sun50i-h616.dtsi
+++ b/src/arm64/allwinner/sun50i-h616.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun50i-h616-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -133,11 +134,28 @@
 			#reset-cells = <1>;
 		};
 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h616-dma",
+				     "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <49>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
 			reg = <0x03006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -240,6 +258,11 @@
 				function = "spi1";
 			};
 
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH4";
+				function = "spdif";
+			};
+
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -256,6 +279,12 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
+
+			/omit-if-no-ref/
+			x32clk_fanout_pin: x32clk-fanout-pin {
+				pins = "PG10";
+				function = "clock";
+			};
 		};
 
 		gic: interrupt-controller@3021000 {
@@ -339,6 +368,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 14>, <&dma 14>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -350,6 +381,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -361,6 +394,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
@@ -372,6 +407,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART3>;
+			dmas = <&dma 17>, <&dma 17>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
@@ -383,6 +420,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART4>;
+			dmas = <&dma 18>, <&dma 18>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART4>;
 			status = "disabled";
 		};
@@ -394,6 +433,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART5>;
+			dmas = <&dma 19>, <&dma 19>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART5>;
 			status = "disabled";
 		};
@@ -405,6 +446,8 @@
 			reg = <0x05002000 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C0>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c0_pins>;
@@ -420,6 +463,8 @@
 			reg = <0x05002400 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -433,6 +478,8 @@
 			reg = <0x05002800 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -446,6 +493,8 @@
 			reg = <0x05002c00 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -459,6 +508,8 @@
 			reg = <0x05003000 0x400>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
+			dmas = <&dma 47>, <&dma 47>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_I2C4>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -472,6 +523,8 @@
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_SPI0>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -485,6 +538,8 @@
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_SPI1>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -511,6 +566,34 @@
 			};
 		};
 
+		spdif: spdif@5093000 {
+			compatible = "allwinner,sun50i-h616-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h616-ths";
+			reg = <0x05070400 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			allwinner,sram = <&syscon>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		usbotg: usb@5100000 {
 			compatible = "allwinner,sun50i-h616-musb",
 				     "allwinner,sun8i-h3-musb";
@@ -734,6 +817,8 @@
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			dmas = <&dma 48>, <&dma 48>;
+			dma-names = "rx", "tx";
 			resets = <&r_ccu RST_R_APB2_I2C>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -755,4 +840,74 @@
 			#size-cells = <0>;
 		};
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 2>;
+			sustainable-power = <1000>;
+
+			trips {
+				cpu_threshold: cpu-trip-0 {
+					temperature = <60000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_target: cpu-trip-1 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_critical: cpu-trip-2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 0>;
+			sustainable-power = <1100>;
+
+			trips {
+				gpu_temp_critical: gpu-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ve-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				ve_temp_critical: ve-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 3>;
+
+			trips {
+				ddr_temp_critical: ddr-trip-0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+		};
+	};
 };
diff --git a/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi b/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
new file mode 100644
index 0000000000..8c1263a393
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h618-longan-module-3h.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include "sun50i-h616.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
diff --git a/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts b/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts
new file mode 100644
index 0000000000..18b29c6b86
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h618-longanpi-3h.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h618-longan-module-3h.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Sipeed Longan Pi 3H";
+	compatible = "sipeed,longan-pi-3h", "sipeed,longan-module-3h", "allwinner,sun50i-h618";
+
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&pio 6 4 GPIO_ACTIVE_LOW>; /* PG4 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+};
+
+&axp313 {
+	vin1-supply = <&reg_vcc5v>;
+	vin2-supply = <&reg_vcc5v>;
+	vin3-supply = <&reg_vcc5v>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+/* WiFi & BT combo module is connected to this Host */
+&ehci3 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;	/* PF6 */
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	usb2_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts b/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
index 8ea1fd41ae..ac0a2b7ea6 100644
--- a/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
+++ b/src/arm64/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -15,6 +15,7 @@
 	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
 
 	aliases {
+		ethernet1 = &sdio_wifi;
 		serial0 = &uart0;
 	};
 
@@ -39,6 +40,15 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&x32clk_fanout_pin>;
+		pinctrl-names = "default";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+	};
 };
 
 &ehci0 {
@@ -60,6 +70,19 @@
 	status = "okay";
 };
 
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
 &mmc2 {
 	vmmc-supply = <&reg_dldo1>;
 	vqmmc-supply = <&reg_aldo1>;
diff --git a/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts b/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
new file mode 100644
index 0000000000..b6e3c16979
--- /dev/null
+++ b/src/arm64/allwinner/sun50i-h64-remix-mini-pc.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2023 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Remix Mini PC";
+	compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet1 = &rtl8723bs;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v: regulator-5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+/* Connects to the AC200 chip */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * We cannot add that supply for now since it would create a circular
+	 * dependency between pinctrl, the regulator and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		vin5-supply = <&reg_vcc5v>;
+		vin6-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		dldoin-supply = <&reg_vcc5v>;
+		eldoin-supply = <&reg_vcc5v>;
+		fldoin-supply = <&reg_vcc5v>;
+		drivevbus-supply = <&reg_vcc5v>;
+		ips-supply = <&reg_vcc5v>;
+
+		status = "okay";
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* Deviates from the reset default of 1.1V. */
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	/* Specifying R_PIO consumer would create circular dependency. */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+/* AC200 power supply */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ave-33";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-cpvdd-dram-emmc";
+};
+
+/* Supplies the arisc management core, needed by TF-A to power off cores. */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dcdc1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+/* On the (unpopulated) UART pads. */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/src/arm64/amlogic/amlogic-c3.dtsi b/src/arm64/amlogic/amlogic-c3.dtsi
index 2ad1f8eef1..32a754fe79 100644
--- a/src/arm64/amlogic/amlogic-c3.dtsi
+++ b/src/arm64/amlogic/amlogic-c3.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/amlogic,c3-reset.h>
 
 / {
 	cpus {
@@ -81,6 +82,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			reset: reset-controller@2000 {
+				compatible = "amlogic,c3-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
 			watchdog@2100 {
 				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
 				reg = <0x0 0x2100 0x0 0x10>;
diff --git a/src/arm64/amlogic/amlogic-t7.dtsi b/src/arm64/amlogic/amlogic-t7.dtsi
index a03c7667d2..5248bdf824 100644
--- a/src/arm64/amlogic/amlogic-t7.dtsi
+++ b/src/arm64/amlogic/amlogic-t7.dtsi
@@ -54,7 +54,7 @@
 			enable-method = "psci";
 		};
 
-		cpu101: cpu@101{
+		cpu101: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x101>;
@@ -171,6 +171,16 @@
 				};
 			};
 
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,t7-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
 			uart_a: serial@78000 {
 				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
 				reg = <0x0 0x78000 0x0 0x18>;
diff --git a/src/arm64/amlogic/meson-a1-ad402.dts b/src/arm64/amlogic/meson-a1-ad402.dts
index 1c20516fa6..4bc30af058 100644
--- a/src/arm64/amlogic/meson-a1-ad402.dts
+++ b/src/arm64/amlogic/meson-a1-ad402.dts
@@ -106,7 +106,7 @@
 	pinctrl-0 = <&spifc_pins>;
 	pinctrl-names = "default";
 
-	spi_nand@0 {
+	flash@0 {
 		compatible = "spi-nand";
 		status = "okay";
 		reg = <0>;
diff --git a/src/arm64/amlogic/meson-a1.dtsi b/src/arm64/amlogic/meson-a1.dtsi
index 648e7f4942..c03e207ea6 100644
--- a/src/arm64/amlogic/meson-a1.dtsi
+++ b/src/arm64/amlogic/meson-a1.dtsi
@@ -450,6 +450,8 @@
 				 <&clkc_periphs CLKID_USB_BUS>,
 				 <&clkc_periphs CLKID_USB_CTRL_IN>;
 			clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
+			assigned-clocks = <&clkc_periphs CLKID_USB_BUS>;
+			assigned-clock-rates = <64000000>;
 			resets = <&reset RESET_USBCTRL>;
 			reset-name = "usb_ctrl";
 
diff --git a/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
index db605f3a22..9b65ae818e 100644
--- a/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
+++ b/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -35,7 +35,7 @@
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -44,7 +44,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC5V";
 		regulator-min-microvolt = <5000000>;
@@ -52,7 +52,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -61,7 +61,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -70,7 +70,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <3300000>;
@@ -79,7 +79,7 @@
 		regulator-always-on;
 	};
 
-	vccq_1v8: regulator-vccq_1v8 {
+	vccq_1v8: regulator-vccq-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCCQ_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -88,7 +88,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
@@ -332,19 +332,3 @@
 		"", "", "", "", "", // 80 - 84
 		"", ""; // 85-86
 };
-
-&cpu0 {
-	#cooling-cells = <2>;
-};
-
-&cpu1 {
-	#cooling-cells = <2>;
-};
-
-&cpu2 {
-	#cooling-cells = <2>;
-};
-
-&cpu3 {
-	#cooling-cells = <2>;
-};
diff --git a/src/arm64/amlogic/meson-axg-s400.dts b/src/arm64/amlogic/meson-axg-s400.dts
index c8905663bc..7ed526f451 100644
--- a/src/arm64/amlogic/meson-axg-s400.dts
+++ b/src/arm64/amlogic/meson-axg-s400.dts
@@ -12,7 +12,7 @@
 	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
 	model = "Amlogic Meson AXG S400 Development Board";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -111,7 +111,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -119,7 +119,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -128,7 +128,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC5V";
 		regulator-min-microvolt = <5000000>;
@@ -139,7 +139,7 @@
 		enable-active-high;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -148,7 +148,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -157,7 +157,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
@@ -166,7 +166,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
diff --git a/src/arm64/amlogic/meson-axg.dtsi b/src/arm64/amlogic/meson-axg.dtsi
index 7e5ac9db93..6d12b760b9 100644
--- a/src/arm64/amlogic/meson-axg.dtsi
+++ b/src/arm64/amlogic/meson-axg.dtsi
@@ -74,6 +74,8 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -83,6 +85,8 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -92,6 +96,8 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -101,6 +107,8 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			dynamic-power-coefficient = <140>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
diff --git a/src/arm64/amlogic/meson-g12-common.dtsi b/src/arm64/amlogic/meson-g12-common.dtsi
index ff68b911b7..9d5eab6595 100644
--- a/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/src/arm64/amlogic/meson-g12-common.dtsi
@@ -2502,6 +2502,9 @@
 		clocks = <&clkc CLKID_NNA_CORE_CLK>,
 			 <&clkc CLKID_NNA_AXI_CLK>;
 		clock-names = "core", "bus";
+		assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
+				  <&clkc CLKID_NNA_AXI_CLK>;
+		assigned-clock-rates = <800000000>, <800000000>;
 		resets = <&reset RESET_NNA>;
 		status = "disabled";
 	};
diff --git a/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso b/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso
new file mode 100644
index 0000000000..9591fdc31e
--- /dev/null
+++ b/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&sd_emmc_a {
+	/* Per mmc-controller.yaml */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* NB: may be either AP6398S or AP6398SR3 wifi module */
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso b/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso
new file mode 100644
index 0000000000..55fff35b09
--- /dev/null
+++ b/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+&uart_A {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sd_emmc_a {
+	/* No explicit compatible for rtl8822cs sdio */
+};
diff --git a/src/arm64/amlogic/meson-g12a-fbx8am.dts b/src/arm64/amlogic/meson-g12a-fbx8am.dts
new file mode 100644
index 0000000000..af211d8f39
--- /dev/null
+++ b/src/arm64/amlogic/meson-g12a-fbx8am.dts
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/*
+ * SEI codename: SEI530FB (based on SEI510)
+ * Freebox codename: fbx8am
+ * Commercial names: Freebox Pop, Player TV Free 4K
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "freebox,fbx8am", "amlogic,g12a";
+	model = "Freebox Player Pop";
+	chassis-type = "embedded";
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		/* Physical user-accessible reset button near USB port */
+		power-button {
+			label = "Reset";
+			linux,code = <BTN_MISC>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regulator-vddao-3v3-t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <10>; /* required for 43752 */
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "fbx8am";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+			sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/src/arm64/amlogic/meson-g12a-radxa-zero.dts b/src/arm64/amlogic/meson-g12a-radxa-zero.dts
index fcd7e1d8e1..15b9bc2807 100644
--- a/src/arm64/amlogic/meson-g12a-radxa-zero.dts
+++ b/src/arm64/amlogic/meson-g12a-radxa-zero.dts
@@ -60,7 +60,7 @@
 		clock-names = "ext_clock";
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_pw: regulator-hdmi_pw {
+	hdmi_pw: regulator-hdmi-pw {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_PW";
 		regulator-min-microvolt = <5000000>;
@@ -95,7 +95,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -104,7 +104,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-g12a-sei510.dts b/src/arm64/amlogic/meson-g12a-sei510.dts
index 4c4550dd47..61cb8135a3 100644
--- a/src/arm64/amlogic/meson-g12a-sei510.dts
+++ b/src/arm64/amlogic/meson-g12a-sei510.dts
@@ -15,7 +15,7 @@
 	compatible = "seirobotics,sei510", "amlogic,g12a";
 	model = "SEI Robotics SEI510";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -83,7 +83,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -92,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -100,7 +100,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -109,7 +109,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -118,7 +118,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3_t: regultor-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
@@ -147,7 +147,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-g12a-u200.dts b/src/arm64/amlogic/meson-g12a-u200.dts
index 8355ddd7e9..3da7922d83 100644
--- a/src/arm64/amlogic/meson-g12a-u200.dts
+++ b/src/arm64/amlogic/meson-g12a-u200.dts
@@ -75,7 +75,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -84,7 +84,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -92,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -103,7 +103,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -112,7 +112,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -122,7 +122,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -133,7 +133,7 @@
 		enable-active-high;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -142,7 +142,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-g12a-x96-max.dts b/src/arm64/amlogic/meson-g12a-x96-max.dts
index 9b55982b6a..05c7a1e3f1 100644
--- a/src/arm64/amlogic/meson-g12a-x96-max.dts
+++ b/src/arm64/amlogic/meson-g12a-x96-max.dts
@@ -66,7 +66,7 @@
 		clock-names = "ext_clock";
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -75,7 +75,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -83,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -92,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -102,7 +102,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -112,7 +112,7 @@
 		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -121,7 +121,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
index 91c9769fda..d80dd9a3da 100644
--- a/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi
@@ -19,7 +19,7 @@
 		status = "okay";
 	};
 
-	hub_5v: regulator-hub_5v {
+	hub_5v: regulator-hub-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "HUB_5V";
 		regulator-min-microvolt = <5000000>;
diff --git a/src/arm64/amlogic/meson-g12b-odroid.dtsi b/src/arm64/amlogic/meson-g12b-odroid.dtsi
index 9e12a34b28..09d959aefb 100644
--- a/src/arm64/amlogic/meson-g12b-odroid.dtsi
+++ b/src/arm64/amlogic/meson-g12b-odroid.dtsi
@@ -48,7 +48,7 @@
 		};
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -60,7 +60,7 @@
 		regulator-always-on;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -74,7 +74,7 @@
 			 <1800000 1>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -83,7 +83,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -103,7 +103,7 @@
 		enable-active-high;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "5V";
 		regulator-min-microvolt = <5000000>;
@@ -114,7 +114,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -123,7 +123,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -171,7 +171,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -180,7 +180,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-g12b-w400.dtsi b/src/arm64/amlogic/meson-g12b-w400.dtsi
index ac8b717825..4cb6930ffb 100644
--- a/src/arm64/amlogic/meson-g12b-w400.dtsi
+++ b/src/arm64/amlogic/meson-g12b-w400.dtsi
@@ -39,7 +39,7 @@
 		clock-names = "ext_clock";
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -48,7 +48,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -56,7 +56,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gx-libretech-pc.dtsi b/src/arm64/amlogic/meson-gx-libretech-pc.dtsi
index 5e7b9273b0..efd662a452 100644
--- a/src/arm64/amlogic/meson-gx-libretech-pc.dtsi
+++ b/src/arm64/amlogic/meson-gx-libretech-pc.dtsi
@@ -84,7 +84,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -120,7 +120,7 @@
 		};
 	};
 
-	vcc_card: regulator-vcc_card {
+	vcc_card: regulator-vcc-card {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_CARD";
 		regulator-min-microvolt = <3300000>;
@@ -141,7 +141,7 @@
 		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -150,7 +150,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao3v3: regulator-vddio_ao3v3 {
+	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
@@ -159,7 +159,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
index e59c3c92b1..08d6b69ba4 100644
--- a/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi
@@ -50,28 +50,28 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts
index 4aab1ab705..cca129ce2c 100644
--- a/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -78,21 +78,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/src/arm64/amlogic/meson-gxbb-odroidc2.dts
index e6d2de7c45..c431986e6a 100644
--- a/src/arm64/amlogic/meson-gxbb-odroidc2.dts
+++ b/src/arm64/amlogic/meson-gxbb-odroidc2.dts
@@ -67,7 +67,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_p5v0: regulator-hdmi_p5v0 {
+	hdmi_p5v0: regulator-hdmi-p5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_P5V0";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 		vin-supply = <&p5v0>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -92,7 +92,7 @@
 		vin-supply = <&vddio_ao3v3>;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -148,7 +148,7 @@
 		vin-supply = <&p5v0>;
 	};
 
-	ddr3_1v5: regulator-ddr3_1v5 {
+	ddr3_1v5: regulator-ddr3-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "DDR3_1V5";
 		regulator-min-microvolt = <1500000>;
diff --git a/src/arm64/amlogic/meson-gxbb-p200.dts b/src/arm64/amlogic/meson-gxbb-p200.dts
index 591455c50e..7f94716876 100644
--- a/src/arm64/amlogic/meson-gxbb-p200.dts
+++ b/src/arm64/amlogic/meson-gxbb-p200.dts
@@ -21,14 +21,14 @@
 		sound-name-prefix = "DIT";
 	};
 
-	avdd18_usb_adc: regulator-avdd18_usb_adc {
+	avdd18_usb_adc: regulator-avdd18-usb-adc {
 		compatible = "regulator-fixed";
 		regulator-name = "AVDD18_USB_ADC";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
diff --git a/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/src/arm64/amlogic/meson-gxbb-p20x.dtsi
index e803a466fe..52d57773a7 100644
--- a/src/arm64/amlogic/meson-gxbb-p20x.dtsi
+++ b/src/arm64/amlogic/meson-gxbb-p20x.dtsi
@@ -53,21 +53,21 @@
 		regulator-settling-time-down-us = <150000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
index 74df325342..255e93a0b3 100644
--- a/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi
@@ -47,28 +47,28 @@
 		enable-active-high;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxbb-wetek.dtsi b/src/arm64/amlogic/meson-gxbb-wetek.dtsi
index 94dafb9553..deb2952271 100644
--- a/src/arm64/amlogic/meson-gxbb-wetek.dtsi
+++ b/src/arm64/amlogic/meson-gxbb-wetek.dtsi
@@ -49,21 +49,21 @@
 		enable-active-high;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -71,7 +71,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts b/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts
index a29b49f051..90ef9c17d8 100644
--- a/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -42,7 +42,7 @@
 		};
 	};
 
-	dc_5v: regulator-dc_5v {
+	dc_5v: regulator-dc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -89,7 +89,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -98,7 +98,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -107,7 +107,7 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-gxl-s805x-p241.dts b/src/arm64/amlogic/meson-gxl-s805x-p241.dts
index c0d6eb5510..08a4718219 100644
--- a/src/arm64/amlogic/meson-gxl-s805x-p241.dts
+++ b/src/arm64/amlogic/meson-gxl-s805x-p241.dts
@@ -64,28 +64,28 @@
 		reg = <0x0 0x0 0x0 0x20000000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index a18d6d241a..2b94b6e528 100644
--- a/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -37,28 +37,28 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
index c8d74e61de..89fe5110f7 100644
--- a/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -42,21 +42,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 2825db91e4..63b2086006 100644
--- a/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -67,7 +67,7 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	vcc_card: regulator-vcc_card {
+	vcc_card: regulator-vcc-card {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_CARD";
 		regulator-min-microvolt = <3300000>;
@@ -114,7 +114,7 @@
 		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
 	};
 
-	vddio_ao3v3: regulator-vddio_ao3v3 {
+	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
@@ -139,7 +139,7 @@
 		regulator-settling-time-down-us = <50000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -148,7 +148,7 @@
 		regulator-always-on;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
index 27093e6ac9..8b26c9661b 100644
--- a/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -93,7 +93,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -117,7 +117,7 @@
 		regulator-settling-time-down-us = <50000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -125,7 +125,7 @@
 	};
 
 	/* This is provided by LDOs on the eMMC daugther card */
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index f1acca5c44..c79f9f2099 100644
--- a/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -42,21 +42,21 @@
 			 <3300000 1>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi
index a150cc0e18..7e7dc87ede 100644
--- a/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi
@@ -39,28 +39,28 @@
 		regulator-always-on;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
index 860f307494..07e7c3bede 100644
--- a/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
+++ b/src/arm64/amlogic/meson-gxm-khadas-vim2.dts
@@ -112,28 +112,28 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddio_boot: regulator-vddio_boot {
+	vddio_boot: regulator-vddio-boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts b/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts
index 4eda9f634c..a66f19851a 100644
--- a/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts
+++ b/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -14,7 +14,7 @@
 		     "amlogic,meson-gxm";
 	model = "Libre Computer AML-S912-PC";
 
-	typec2_vbus: regulator-typec2_vbus {
+	typec2_vbus: regulator-typec2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "TYPEC2_VBUS";
 		regulator-min-microvolt = <5000000>;
diff --git a/src/arm64/amlogic/meson-khadas-vim3.dtsi b/src/arm64/amlogic/meson-khadas-vim3.dtsi
index 514a6dd4b1..e78cc9b577 100644
--- a/src/arm64/amlogic/meson-khadas-vim3.dtsi
+++ b/src/arm64/amlogic/meson-khadas-vim3.dtsi
@@ -80,7 +80,7 @@
 		clock-names = "ext_clock";
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -88,7 +88,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_5V";
 		regulator-min-microvolt = <5000000>;
@@ -99,7 +99,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -108,7 +108,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -118,7 +118,7 @@
 		/* FIXME: actually controlled by VDDCPU_B_EN */
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -127,7 +127,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -136,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	vsys_3v3: regulator-vsys_3v3 {
+	vsys_3v3: regulator-vsys-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSYS_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -145,7 +145,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr: regulator-usb_pwr {
+	usb_pwr: regulator-usb-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR";
 		regulator-min-microvolt = <5000000>;
diff --git a/src/arm64/amlogic/meson-libretech-cottonwood.dtsi b/src/arm64/amlogic/meson-libretech-cottonwood.dtsi
index 35e8f5bae9..082b72703c 100644
--- a/src/arm64/amlogic/meson-libretech-cottonwood.dtsi
+++ b/src/arm64/amlogic/meson-libretech-cottonwood.dtsi
@@ -150,7 +150,7 @@
 		gpio-open-drain;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -171,7 +171,7 @@
 		pwm-dutycycle-range = <100 0>;
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
+	vddio_ao18: regulator-vddio-ao18 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
@@ -180,7 +180,7 @@
 		vin-supply = <&vddao_3v3>;
 	};
 
-	vddio_c: regulator-vddio_c {
+	vddio_c: regulator-vddio-c {
 		compatible = "regulator-gpio";
 		regulator-name = "VDDIO_C";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-sm1-ac2xx.dtsi b/src/arm64/amlogic/meson-sm1-ac2xx.dtsi
index 46a34731f7..d1fa8b8bf7 100644
--- a/src/arm64/amlogic/meson-sm1-ac2xx.dtsi
+++ b/src/arm64/amlogic/meson-sm1-ac2xx.dtsi
@@ -54,7 +54,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -63,7 +63,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -71,7 +71,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -80,7 +80,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -105,7 +105,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/amlogic/meson-sm1-bananapi.dtsi b/src/arm64/amlogic/meson-sm1-bananapi.dtsi
index 62404743e6..81dce86290 100644
--- a/src/arm64/amlogic/meson-sm1-bananapi.dtsi
+++ b/src/arm64/amlogic/meson-sm1-bananapi.dtsi
@@ -82,7 +82,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -91,7 +91,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -99,7 +99,7 @@
 		regulator-always-on;
 	};
 
-	vddio_c: regulator-vddio_c {
+	vddio_c: regulator-vddio-c {
 		compatible = "regulator-gpio";
 		regulator-name = "VDDIO_C";
 		regulator-min-microvolt = <1800000>;
@@ -116,7 +116,7 @@
 			 <3300000 1>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
@@ -127,7 +127,7 @@
 		regulator-always-on;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -136,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -165,7 +165,7 @@
 	};
 
 	/* USB Hub Power Enable */
-	vl_pwr_en: regulator-vl_pwr_en {
+	vl_pwr_en: regulator-vl-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "VL_PWR_EN";
 		regulator-min-microvolt = <5000000>;
diff --git a/src/arm64/amlogic/meson-sm1-odroid-hc4.dts b/src/arm64/amlogic/meson-sm1-odroid-hc4.dts
index 846a2d6c20..0170139b8d 100644
--- a/src/arm64/amlogic/meson-sm1-odroid-hc4.dts
+++ b/src/arm64/amlogic/meson-sm1-odroid-hc4.dts
@@ -43,7 +43,7 @@
 	};
 
 	/* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
-	p12v_0: regulator-p12v_0 {
+	p12v_0: regulator-p12v-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "P12V_0";
 		regulator-min-microvolt = <12000000>;
@@ -56,7 +56,7 @@
 	};
 
 	/* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
-	p12v_1: regulator-p12v_1 {
+	p12v_1: regulator-p12v-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "P12V_1";
 		regulator-min-microvolt = <12000000>;
diff --git a/src/arm64/amlogic/meson-sm1-odroid.dtsi b/src/arm64/amlogic/meson-sm1-odroid.dtsi
index 1db2327bbd..951eb8e3f0 100644
--- a/src/arm64/amlogic/meson-sm1-odroid.dtsi
+++ b/src/arm64/amlogic/meson-sm1-odroid.dtsi
@@ -28,7 +28,7 @@
 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 	};
 
-	tflash_vdd: regulator-tflash_vdd {
+	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
@@ -40,7 +40,7 @@
 		regulator-always-on;
 	};
 
-	tf_io: gpio-regulator-tf_io {
+	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";
 
 		regulator-name = "TF_IO";
@@ -59,7 +59,7 @@
 			 <1800000 1>;
 	};
 
-	flash_1v8: regulator-flash_1v8 {
+	flash_1v8: regulator-flash-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "FLASH_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	main_12v: regulator-main_12v {
+	main_12v: regulator-main-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "12V";
 		regulator-min-microvolt = <12000000>;
@@ -76,7 +76,7 @@
 		regulator-always-on;
 	};
 
-	vcc_5v: regulator-vcc_5v {
+	vcc_5v: regulator-vcc-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "5V";
 		regulator-min-microvolt = <5000000>;
@@ -87,7 +87,7 @@
 		enable-active-high;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_1v8: regulator-vcc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -96,7 +96,7 @@
 		regulator-always-on;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vcc_3v3: regulator-vcc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -125,7 +125,7 @@
 		regulator-always-on;
 	};
 
-	usb_pwr_en: regulator-usb_pwr_en {
+	usb_pwr_en: regulator-usb-pwr-en {
 		compatible = "regulator-fixed";
 		regulator-name = "USB_PWR_EN";
 		regulator-min-microvolt = <5000000>;
@@ -137,7 +137,7 @@
 		enable-active-high;
 	};
 
-	vddao_1v8: regulator-vddao_1v8 {
+	vddao_1v8: regulator-vddao-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -146,7 +146,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
diff --git a/src/arm64/amlogic/meson-sm1-sei610.dts b/src/arm64/amlogic/meson-sm1-sei610.dts
index 109932068d..3581e14cbf 100644
--- a/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -127,7 +127,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -136,7 +136,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -144,7 +144,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -153,7 +153,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -163,7 +163,7 @@
 	};
 
 	/* Used by Tuner, RGB Led & IR Emitter LED array */
-	vddao_3v3_t: regulator-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
@@ -192,7 +192,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
index 78204d71ec..999d937302 100644
--- a/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+++ b/src/arm64/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -125,6 +125,11 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
diff --git a/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
index fcf092c81b..19fc03ef47 100644
--- a/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
+++ b/src/arm64/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
@@ -155,6 +155,11 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
diff --git a/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
index d94a53d683..2a0d4ee3bd 100644
--- a/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+++ b/src/arm64/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -166,11 +166,15 @@
 	};
 };
 
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
 	nand-on-flash-bbt;
-	brcm,nand-has-wp;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -181,16 +185,17 @@
 		#size-cells = <1>;
 
 		partition@0 {
-			compatible = "nvmem-cells";
 			label = "cferom";
 			reg = <0x0 0x100000>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0x100000>;
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
 
-			base_mac_addr: mac@106a0 {
-				reg = <0x106a0 0x6>;
+				base_mac_addr: mac@106a0 {
+					reg = <0x106a0 0x6>;
+				};
 			};
 		};
 
diff --git a/src/arm64/broadcom/bcmbca/bcm4908.dtsi b/src/arm64/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027b..e01cf4f540 100644
--- a/src/arm64/broadcom/bcmbca/bcm4908.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm4908.dtsi
@@ -227,9 +227,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -589,7 +586,7 @@
 			status = "disabled";
 		};
 
-		nand-controller@1800 {
+		nand_controller: nand-controller@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
@@ -597,7 +594,7 @@
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand_ctlrdy";
-			status = "okay";
+			status = "disabled";
 
 			nandcs: nand@0 {
 				compatible = "brcm,nandcs";
diff --git a/src/arm64/broadcom/bcmbca/bcm4912.dtsi b/src/arm64/broadcom/bcmbca/bcm4912.dtsi
index d658c81f72..14b2adfb81 100644
--- a/src/arm64/broadcom/bcmbca/bcm4912.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm4912.dtsi
@@ -138,6 +138,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm64/broadcom/bcmbca/bcm63146.dtsi b/src/arm64/broadcom/bcmbca/bcm63146.dtsi
index 4f474d4702..589b8a1efc 100644
--- a/src/arm64/broadcom/bcmbca/bcm63146.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm63146.dtsi
@@ -119,6 +119,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm64/broadcom/bcmbca/bcm63158.dtsi b/src/arm64/broadcom/bcmbca/bcm63158.dtsi
index 909f254dc4..48d618e758 100644
--- a/src/arm64/broadcom/bcmbca/bcm63158.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm63158.dtsi
@@ -137,6 +137,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm64/broadcom/bcmbca/bcm6813.dtsi b/src/arm64/broadcom/bcmbca/bcm6813.dtsi
index 685ae32951..1d1303cf90 100644
--- a/src/arm64/broadcom/bcmbca/bcm6813.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm6813.dtsi
@@ -138,6 +138,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/src/arm64/broadcom/bcmbca/bcm6856.dtsi b/src/arm64/broadcom/bcmbca/bcm6856.dtsi
index 820553ce54..00c62c1e5d 100644
--- a/src/arm64/broadcom/bcmbca/bcm6856.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm6856.dtsi
@@ -119,5 +119,19 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };
diff --git a/src/arm64/broadcom/bcmbca/bcm6858.dtsi b/src/arm64/broadcom/bcmbca/bcm6858.dtsi
index 0eb93c2982..caeaf428dc 100644
--- a/src/arm64/broadcom/bcmbca/bcm6858.dtsi
+++ b/src/arm64/broadcom/bcmbca/bcm6858.dtsi
@@ -156,5 +156,19 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };
diff --git a/src/arm64/broadcom/bcmbca/bcm94908.dts b/src/arm64/broadcom/bcmbca/bcm94908.dts
index c4e6e71f63..030ffa5364 100644
--- a/src/arm64/broadcom/bcmbca/bcm94908.dts
+++ b/src/arm64/broadcom/bcmbca/bcm94908.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/broadcom/bcmbca/bcm94912.dts b/src/arm64/broadcom/bcmbca/bcm94912.dts
index e69cd68321..4b779e6c22 100644
--- a/src/arm64/broadcom/bcmbca/bcm94912.dts
+++ b/src/arm64/broadcom/bcmbca/bcm94912.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/broadcom/bcmbca/bcm963146.dts b/src/arm64/broadcom/bcmbca/bcm963146.dts
index db2c82d6df..2851e8e41b 100644
--- a/src/arm64/broadcom/bcmbca/bcm963146.dts
+++ b/src/arm64/broadcom/bcmbca/bcm963146.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/broadcom/bcmbca/bcm963158.dts b/src/arm64/broadcom/bcmbca/bcm963158.dts
index 25c12bc635..17dc594fe8 100644
--- a/src/arm64/broadcom/bcmbca/bcm963158.dts
+++ b/src/arm64/broadcom/bcmbca/bcm963158.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/broadcom/bcmbca/bcm96813.dts b/src/arm64/broadcom/bcmbca/bcm96813.dts
index faba21f031..34832a7347 100644
--- a/src/arm64/broadcom/bcmbca/bcm96813.dts
+++ b/src/arm64/broadcom/bcmbca/bcm96813.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/broadcom/bcmbca/bcm96856.dts b/src/arm64/broadcom/bcmbca/bcm96856.dts
index 9808331eed..e1396b5544 100644
--- a/src/arm64/broadcom/bcmbca/bcm96856.dts
+++ b/src/arm64/broadcom/bcmbca/bcm96856.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/broadcom/bcmbca/bcm96858.dts b/src/arm64/broadcom/bcmbca/bcm96858.dts
index 1f561c8e13..30bbf6f291 100644
--- a/src/arm64/broadcom/bcmbca/bcm96858.dts
+++ b/src/arm64/broadcom/bcmbca/bcm96858.dts
@@ -32,3 +32,13 @@
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/src/arm64/exynos/exynos850.dtsi b/src/arm64/exynos/exynos850.dtsi
index da3f4a791e..2ba67c3d06 100644
--- a/src/arm64/exynos/exynos850.dtsi
+++ b/src/arm64/exynos/exynos850.dtsi
@@ -184,6 +184,16 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		pdma0: dma-controller@120c0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x120c0000 0x1000>;
+			clocks = <&cmu_core CLK_GOUT_PDMA_CORE_ACLK>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			interrupts = <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-broken-no-flushp;
+		};
+
 		gic: interrupt-controller@12a01000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -728,6 +738,24 @@
 				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
 			clock-names = "pclk", "ipclk";
 			status = "disabled";
+
+			spi_0: spi@13940000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x13940000 0x30>;
+				clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+					 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp0: usi@11d000c0 {
@@ -769,6 +797,24 @@
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_1: spi@11d00000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d00000 0x30>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 12>, <&pdma0 13>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp1: usi@11d200c0 {
@@ -810,6 +856,24 @@
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_2: spi@11d20000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d20000 0x30>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+				clock-names = "spi", "spi_busclk0";
+				dmas = <&pdma0 14>, <&pdma0 15>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				samsung,spi-src-clk = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/src/arm64/exynos/google/gs101-oriole.dts b/src/arm64/exynos/google/gs101-oriole.dts
index 4a71f75220..6ccade2c8c 100644
--- a/src/arm64/exynos/google/gs101-oriole.dts
+++ b/src/arm64/exynos/google/gs101-oriole.dts
@@ -63,6 +63,20 @@
 	clock-frequency = <200000000>;
 };
 
+&hsi2c_8 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&hsi2c_12 {
+	status = "okay";
+	/* TODO: add the devices once drivers exist */
+};
+
 &pinctrl_far_alive {
 	key_voldown: key-voldown-pins {
 		samsung,pins = "gpa7-3";
@@ -99,6 +113,16 @@
 	status = "okay";
 };
 
+&usi8 {
+	samsung,mode = <USI_V2_I2C>;
+	status = "okay";
+};
+
+&usi12 {
+	samsung,mode = <USI_V2_I2C>;
+	status = "okay";
+};
+
 &watchdog_cl0 {
 	timeout-sec = <30>;
 	status = "okay";
diff --git a/src/arm64/exynos/google/gs101-pinctrl.dtsi b/src/arm64/exynos/google/gs101-pinctrl.dtsi
index e6a9776d4d..a675f822ac 100644
--- a/src/arm64/exynos/google/gs101-pinctrl.dtsi
+++ b/src/arm64/exynos/google/gs101-pinctrl.dtsi
@@ -251,7 +251,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	pcie0_clkreq: pcie0-clkreq-pins{
+	pcie0_clkreq: pcie0-clkreq-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <GS101_PIN_FUNC_2>;
 		samsung,pin-pud = <GS101_PIN_PULL_UP>;
diff --git a/src/arm64/exynos/google/gs101.dtsi b/src/arm64/exynos/google/gs101.dtsi
index d838e3a7af..55e6bcb368 100644
--- a/src/arm64/exynos/google/gs101.dtsi
+++ b/src/arm64/exynos/google/gs101.dtsi
@@ -73,7 +73,7 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0000>;
 			enable-method = "psci";
-			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
 		};
@@ -83,7 +83,7 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0100>;
 			enable-method = "psci";
-			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
 		};
@@ -93,7 +93,7 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0200>;
 			enable-method = "psci";
-			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
 		};
@@ -103,7 +103,7 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0300>;
 			enable-method = "psci";
-			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			cpu-idle-states = <&ANANKE_CPU_SLEEP>;
 			capacity-dmips-mhz = <250>;
 			dynamic-power-coefficient = <70>;
 		};
@@ -113,7 +113,7 @@
 			compatible = "arm,cortex-a76";
 			reg = <0x0400>;
 			enable-method = "psci";
-			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			cpu-idle-states = <&ENYO_CPU_SLEEP>;
 			capacity-dmips-mhz = <620>;
 			dynamic-power-coefficient = <284>;
 		};
@@ -123,7 +123,7 @@
 			compatible = "arm,cortex-a76";
 			reg = <0x0500>;
 			enable-method = "psci";
-			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			cpu-idle-states = <&ENYO_CPU_SLEEP>;
 			capacity-dmips-mhz = <620>;
 			dynamic-power-coefficient = <284>;
 		};
@@ -133,7 +133,7 @@
 			compatible = "arm,cortex-x1";
 			reg = <0x0600>;
 			enable-method = "psci";
-			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			cpu-idle-states = <&HERA_CPU_SLEEP>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <650>;
 		};
@@ -143,7 +143,7 @@
 			compatible = "arm,cortex-x1";
 			reg = <0x0700>;
 			enable-method = "psci";
-			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			cpu-idle-states = <&HERA_CPU_SLEEP>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <650>;
 		};
@@ -180,14 +180,6 @@
 		};
 	};
 
-	/* TODO replace with CCF clock */
-	dummy_clk: clock-3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12345>;
-		clock-output-names = "pclk";
-	};
-
 	/* ect node is required to be present by bootloader */
 	ect {
 	};
@@ -292,6 +284,26 @@
 			clock-names = "bus", "sss";
 		};
 
+		timer@10050000 {
+			compatible = "google,gs101-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&ext_24_5m>, <&cmu_misc CLK_GOUT_MISC_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
 		watchdog_cl0: watchdog@10060000 {
 			compatible = "google,gs101-wdt";
 			reg = <0x10060000 0x100>;
@@ -339,9 +351,20 @@
 			};
 		};
 
+		cmu_peric0: clock-controller@10800000 {
+			compatible = "google,gs101-cmu-peric0";
+			reg = <0x10800000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		sysreg_peric0: syscon@10820000 {
 			compatible = "google,gs101-peric0-sysreg", "syscon";
 			reg = <0x10820000 0x10000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK>;
 		};
 
 		pinctrl_peric0: pinctrl@10840000 {
@@ -350,6 +373,35 @@
 			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi8: usi@109700c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x101c>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10970000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c8_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
 		usi_uart: usi@10a000c0 {
 			compatible = "google,gs101-usi",
 				     "samsung,exynos850-usi";
@@ -357,7 +409,8 @@
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			clocks = <&dummy_clk>, <&dummy_clk>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
 			samsung,mode = <USI_V2_UART>;
@@ -366,19 +419,30 @@
 			serial_0: serial@10a00000 {
 				compatible = "google,gs101-uart";
 				reg = <0x10a00000 0xc0>;
-				reg-io-width = <4>;
 				interrupts = <GIC_SPI 634
 					      IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
 				samsung,uart-fifosize = <256>;
 				status = "disabled";
 			};
 		};
 
+		cmu_peric1: clock-controller@10c00000 {
+			compatible = "google,gs101-cmu-peric1";
+			reg = <0x10c00000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		sysreg_peric1: syscon@10c20000 {
 			compatible = "google,gs101-peric1-sysreg", "syscon";
 			reg = <0x10c20000 0x10000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PERIC1_PCLK>;
 		};
 
 		pinctrl_peric1: pinctrl@10c40000 {
@@ -387,6 +451,35 @@
 			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi12: usi@10d500c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1010>;
+			status = "disabled";
+
+			hsi2c_12: i2c@10d50000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d50000 0xc0>;
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
 		pinctrl_hsi1: pinctrl@11840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x11840000 0x00001000>;
diff --git a/src/arm64/freescale/fsl-ls1012a.dtsi b/src/arm64/freescale/fsl-ls1012a.dtsi
index 1e3fe3897b..fe9093b3c0 100644
--- a/src/arm64/freescale/fsl-ls1012a.dtsi
+++ b/src/arm64/freescale/fsl-ls1012a.dtsi
@@ -290,7 +290,7 @@
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1012a-dcfg",
 				     "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -351,24 +351,26 @@
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 2 0>;
 			status = "disabled";
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 13 0>;
 			status = "disabled";
 		};
 
@@ -499,6 +501,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			snps,host-vbus-glitches;
 		};
 
 		sata: sata@3200000 {
@@ -550,6 +553,7 @@
 					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
diff --git a/src/arm64/freescale/fsl-ls1046a.dtsi b/src/arm64/freescale/fsl-ls1046a.dtsi
index 1515cec231..754a64be73 100644
--- a/src/arm64/freescale/fsl-ls1046a.dtsi
+++ b/src/arm64/freescale/fsl-ls1046a.dtsi
@@ -485,7 +485,6 @@
 				<0x00030005 0x00000042>,
 				<0x00030006 0x0000004c>,
 				<0x00030007 0x00000056>;
-			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/src/arm64/freescale/fsl-ls1088a.dtsi b/src/arm64/freescale/fsl-ls1088a.dtsi
index 8616d5e0c3..604bf88d70 100644
--- a/src/arm64/freescale/fsl-ls1088a.dtsi
+++ b/src/arm64/freescale/fsl-ls1088a.dtsi
@@ -591,6 +591,8 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x20 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <24>;
 			num-ob-windows = <256>;
 			max-functions = /bits/ 8 <2>;
@@ -628,6 +630,8 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x28 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
@@ -664,6 +668,8 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x30 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
diff --git a/src/arm64/freescale/fsl-lx2160a.dtsi b/src/arm64/freescale/fsl-lx2160a.dtsi
index 6640b49670..e665c629e1 100644
--- a/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -949,34 +949,50 @@
 		};
 
 		uart0: serial@21c0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@21d0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@21e0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@21f0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
diff --git a/src/arm64/freescale/imx8-apalis-eval-v1.1.dtsi b/src/arm64/freescale/imx8-apalis-eval-v1.1.dtsi
new file mode 100644
index 0000000000..0f77f78f4d
--- /dev/null
+++ b/src/arm64/freescale/imx8-apalis-eval-v1.1.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/src/arm64/freescale/imx8-apalis-eval-v1.2.dtsi b/src/arm64/freescale/imx8-apalis-eval-v1.2.dtsi
new file mode 100644
index 0000000000..f5c6a0164f
--- /dev/null
+++ b/src/arm64/freescale/imx8-apalis-eval-v1.2.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* Power/Current Measurement Sensor */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148 */
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x00000021>; /* MXM3_152 */
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158 */
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021>; /* MXM3_156 */
+	};
+};
diff --git a/src/arm64/freescale/imx8-apalis-eval.dtsi b/src/arm64/freescale/imx8-apalis-eval.dtsi
index 685d4294f4..deecb96a15 100644
--- a/src/arm64/freescale/imx8-apalis-eval.dtsi
+++ b/src/arm64/freescale/imx8-apalis-eval.dtsi
@@ -35,18 +35,6 @@
 	status = "okay";
 };
 
-/* Apalis CAN1 */
-&flexcan1 {
-	status = "okay";
-};
-
-/* Apalis CAN2 */
-&flexcan2 {
-	status = "okay";
-};
-
-/* TODO: GPU */
-
 /* Apalis I2C1 */
 &i2c2 {
 	status = "okay";
@@ -132,13 +120,3 @@
 };
 
 /* TODO: Apalis USBH4 SuperSpeed */
-
-/* Apalis MMC1 */
-&usdhc2 {
-	status = "okay";
-};
-
-/* Apalis SD1 */
-&usdhc3 {
-	status = "okay";
-};
diff --git a/src/arm64/freescale/imx8-apalis-v1.1.dtsi b/src/arm64/freescale/imx8-apalis-v1.1.dtsi
index f69b0c1756..160153853b 100644
--- a/src/arm64/freescale/imx8-apalis-v1.1.dtsi
+++ b/src/arm64/freescale/imx8-apalis-v1.1.dtsi
@@ -261,7 +261,6 @@
 			reset-assert-us = <2>;
 			reset-deassert-us = <2>;
 			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
-			reset-names = "phy";
 		};
 	};
 };
diff --git a/src/arm64/freescale/imx8-ss-audio.dtsi b/src/arm64/freescale/imx8-ss-audio.dtsi
index f057c6b21b..07afeb78ed 100644
--- a/src/arm64/freescale/imx8-ss-audio.dtsi
+++ b/src/arm64/freescale/imx8-ss-audio.dtsi
@@ -4,6 +4,7 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
@@ -14,12 +15,174 @@ audio_ipg_clk: clock-audio-ipg {
 	clock-output-names = "audio_ipg_clk";
 };
 
+clk_ext_aud_mclk0: clock-ext-aud-mclk0 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk0";
+};
+
+clk_ext_aud_mclk1: clock-ext-aud-mclk1 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk1";
+};
+
+clk_esai0_rx_clk: clock-esai0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_clk";
+};
+
+clk_esai0_rx_hf_clk: clock-esai0-rx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_hf_clk";
+};
+
+clk_esai0_tx_clk: clock-esai0-tx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_clk";
+};
+
+clk_esai0_tx_hf_clk: clock-esai0-tx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_hf_clk";
+};
+
+clk_spdif0_rx: clock-spdif0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "spdif0_rx";
+};
+
+clk_sai0_rx_bclk: clock-sai0-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_rx_bclk";
+};
+
+clk_sai0_tx_bclk: clock-sai0-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_tx_bclk";
+};
+
+clk_sai1_rx_bclk: clock-sai1-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_rx_bclk";
+};
+
+clk_sai1_tx_bclk: clock-sai1-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_tx_bclk";
+};
+
+clk_sai2_rx_bclk: clock-sai2-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai2_rx_bclk";
+};
+
+clk_sai3_rx_bclk: clock-sai3-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai3_rx_bclk";
+};
+
+clk_sai4_rx_bclk: clock-sai4-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai4_rx_bclk";
+};
+
 audio_subsys: bus@59000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
 
+	sai0: sai@59040000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59040000 0x10000>;
+		interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai0_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai0_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 12 0 1>, <&edma0 13 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+		status = "disabled";
+	};
+
+	sai1: sai@59050000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59050000 0x10000>;
+		interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai1_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai1_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 14 0 1>, <&edma0 15 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+		status = "disabled";
+	};
+
+	sai2: sai@59060000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59060000 0x10000>;
+		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai2_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai2_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 16 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+		status = "disabled";
+	};
+
+	sai3: sai@59070000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59070000 0x10000>;
+		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai3_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai3_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 17 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+		status = "disabled";
+	};
+
 	edma0: dma-controller@591f0000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x591f0000 0x190000>;
@@ -76,6 +239,54 @@ audio_subsys: bus@59000000 {
 				<&pd IMX_SC_R_DMA_0_CH23>;
 	};
 
+	sai0_lpcg: clock-controller@59440000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai0_lpcg_mclk",
+				     "sai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+	};
+
+	sai1_lpcg: clock-controller@59450000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai1_lpcg_mclk",
+				     "sai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+	};
+
+	sai2_lpcg: clock-controller@59460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai2_lpcg_mclk",
+				     "sai2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+	};
+
+	sai3_lpcg: clock-controller@59470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai3_lpcg_mclk",
+				     "sai3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+	};
+
 	dsp_lpcg: clock-controller@59580000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x59580000 0x10000>;
@@ -151,4 +362,123 @@ audio_subsys: bus@59000000 {
 				<&pd IMX_SC_R_DMA_1_CH9>,
 				<&pd IMX_SC_R_DMA_1_CH10>;
 	};
+
+	aud_rec0_lpcg: clock-controller@59d00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_rec1_lpcg: clock-controller@59d10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	aud_pll_div0_lpcg: clock-controller@59d20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_pll_div1_lpcg: clock-controller@59d30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	mclkout0_lpcg: clock-controller@59d50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT0_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_0>;
+	};
+
+	mclkout1_lpcg: clock-controller@59d60000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d60000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT1_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_1>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qxp-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "spdif0_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk";
+	};
 };
diff --git a/src/arm64/freescale/imx8-ss-conn.dtsi b/src/arm64/freescale/imx8-ss-conn.dtsi
index 3c42240e78..4aaf5a0c1e 100644
--- a/src/arm64/freescale/imx8-ss-conn.dtsi
+++ b/src/arm64/freescale/imx8-ss-conn.dtsi
@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
diff --git a/src/arm64/freescale/imx8-ss-dma.dtsi b/src/arm64/freescale/imx8-ss-dma.dtsi
index b0bb77150a..f7a91d43a0 100644
--- a/src/arm64/freescale/imx8-ss-dma.dtsi
+++ b/src/arm64/freescale/imx8-ss-dma.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
 dma_ipg_clk: clock-dma-ipg {
@@ -27,8 +28,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -43,8 +44,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -59,8 +60,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -75,8 +76,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -93,8 +94,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 9 0 0>, <&edma2 8 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
 		status = "disabled";
 	};
 
@@ -107,8 +108,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 11 0 0>, <&edma2 10 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
 		status = "disabled";
 	};
 
@@ -121,8 +122,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 		status = "disabled";
 	};
 
@@ -135,8 +136,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 		status = "disabled";
 	};
 
@@ -144,8 +145,8 @@ dma_subsys: bus@5a000000 {
 		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
 		reg = <0x5a190000 0x1000>;
 		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&adma_pwm_lpcg 1>,
-			 <&adma_pwm_lpcg 0>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -192,29 +193,6 @@ dma_subsys: bus@5a000000 {
 				<&pd IMX_SC_R_DMA_2_CH15>;
 	};
 
-	edma3: dma-controller@5a9f0000 {
-		compatible = "fsl,imx8qm-edma";
-		reg = <0x5a9f0000 0x90000>;
-		#dma-cells = <3>;
-		dma-channels = <8>;
-		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
-				<&pd IMX_SC_R_DMA_3_CH1>,
-				<&pd IMX_SC_R_DMA_3_CH2>,
-				<&pd IMX_SC_R_DMA_3_CH3>,
-				<&pd IMX_SC_R_DMA_3_CH4>,
-				<&pd IMX_SC_R_DMA_3_CH5>,
-				<&pd IMX_SC_R_DMA_3_CH6>,
-				<&pd IMX_SC_R_DMA_3_CH7>;
-	};
-
 	spi0_lpcg: clock-controller@5a400000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a400000 0x10000>;
@@ -377,8 +355,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -392,8 +370,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -406,8 +384,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -427,8 +405,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -448,8 +426,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -460,6 +438,29 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	edma3: dma-controller@5a9f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a9f0000 0x90000>;
+		#dma-cells = <3>;
+		dma-channels = <8>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+				<&pd IMX_SC_R_DMA_3_CH1>,
+				<&pd IMX_SC_R_DMA_3_CH2>,
+				<&pd IMX_SC_R_DMA_3_CH3>,
+				<&pd IMX_SC_R_DMA_3_CH4>,
+				<&pd IMX_SC_R_DMA_3_CH5>,
+				<&pd IMX_SC_R_DMA_3_CH6>,
+				<&pd IMX_SC_R_DMA_3_CH7>;
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
diff --git a/src/arm64/freescale/imx8-ss-gpu0.dtsi b/src/arm64/freescale/imx8-ss-gpu0.dtsi
new file mode 100644
index 0000000000..9b8a44aa63
--- /dev/null
+++ b/src/arm64/freescale/imx8-ss-gpu0.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+gpu0_subsys: bus@53000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x53000000 0x0 0x53000000 0x1000000>;
+
+	gpu_3d0: gpu@53100000 {
+		compatible = "vivante,gc";
+		reg = <0x53100000 0x40000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		clock-names = "core", "shader";
+		assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		assigned-clock-rates = <700000000>, <850000000>;
+		power-domains = <&pd IMX_SC_R_GPU_0_PID0>;
+	};
+};
diff --git a/src/arm64/freescale/imx8-ss-lsio.dtsi b/src/arm64/freescale/imx8-ss-lsio.dtsi
index 7e510b21bb..764c1a08e3 100644
--- a/src/arm64/freescale/imx8-ss-lsio.dtsi
+++ b/src/arm64/freescale/imx8-ss-lsio.dtsi
@@ -25,8 +25,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -38,8 +38,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -51,8 +51,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -64,8 +64,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
diff --git a/src/arm64/freescale/imx8dxl-evk.dts b/src/arm64/freescale/imx8dxl-evk.dts
index b972658efb..2123d431e0 100644
--- a/src/arm64/freescale/imx8dxl-evk.dts
+++ b/src/arm64/freescale/imx8dxl-evk.dts
@@ -81,6 +81,24 @@
 		status = "disabled";
 	};
 
+	reg_can0_stby: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "can0-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can1_stby: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -261,12 +279,81 @@
 	};
 };
 
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	pca9548_2: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+	};
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
 	status = "okay";
 };
 
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can0_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
 &lsio_gpio4 {
 	status = "okay";
 };
@@ -436,6 +523,20 @@
 		>;
 	};
 
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021
+			IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021
+			IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
diff --git a/src/arm64/freescale/imx8dxl-ss-adma.dtsi b/src/arm64/freescale/imx8dxl-ss-adma.dtsi
index 0a477f6318..5d012c9522 100644
--- a/src/arm64/freescale/imx8dxl-ss-adma.dtsi
+++ b/src/arm64/freescale/imx8dxl-ss-adma.dtsi
@@ -15,6 +15,63 @@
 	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&edma0 {
+	reg = <0x591f0000 0x1a0000>;
+	#dma-cells = <3>;
+	dma-channels = <25>;
+	dma-channel-mask = <0x1c0cc0>;
+	interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */
+		<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */
+		<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */
+		<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */
+		<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */
+	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+			<&pd IMX_SC_R_DMA_0_CH1>,
+			<&pd IMX_SC_R_DMA_0_CH2>,
+			<&pd IMX_SC_R_DMA_0_CH3>,
+			<&pd IMX_SC_R_DMA_0_CH4>,
+			<&pd IMX_SC_R_DMA_0_CH5>,
+			<&pd IMX_SC_R_DMA_0_CH6>,
+			<&pd IMX_SC_R_DMA_0_CH7>,
+			<&pd IMX_SC_R_DMA_0_CH8>,
+			<&pd IMX_SC_R_DMA_0_CH9>,
+			<&pd IMX_SC_R_DMA_0_CH10>,
+			<&pd IMX_SC_R_DMA_0_CH11>,
+			<&pd IMX_SC_R_DMA_0_CH12>,
+			<&pd IMX_SC_R_DMA_0_CH13>,
+			<&pd IMX_SC_R_DMA_0_CH14>,
+			<&pd IMX_SC_R_DMA_0_CH15>,
+			<&pd IMX_SC_R_DMA_0_CH16>,
+			<&pd IMX_SC_R_DMA_0_CH17>,
+			<&pd IMX_SC_R_DMA_0_CH18>,
+			<&pd IMX_SC_R_DMA_0_CH19>,
+			<&pd IMX_SC_R_DMA_0_CH20>,
+			<&pd IMX_SC_R_DMA_0_CH21>,
+			<&pd IMX_SC_R_DMA_0_CH22>,
+			<&pd IMX_SC_R_DMA_0_CH23>,
+			<&pd IMX_SC_R_DMA_0_CH24>;
+};
+
 &edma2 {
 	interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
@@ -45,24 +102,44 @@
 		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&flexcan1 {
+	interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan2 {
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan3 {
+	interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &i2c0 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 1 0 0>, <&edma3 0 0 FSL_EDMA_RX>;
 };
 
 &i2c1 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 3 0 0>, <&edma3 2 0 FSL_EDMA_RX>;
 };
 
 &i2c2 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 5 0 0>, <&edma3 4 0 FSL_EDMA_RX>;
 };
 
 &i2c3 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 7 0 0>, <&edma3 6 0 FSL_EDMA_RX>;
 };
 
 &lpuart0 {
diff --git a/src/arm64/freescale/imx8dxl.dtsi b/src/arm64/freescale/imx8dxl.dtsi
index f580eb6db9..a0674c5c55 100644
--- a/src/arm64/freescale/imx8dxl.dtsi
+++ b/src/arm64/freescale/imx8dxl.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/src/arm64/freescale/imx8dxp-tqma8xdp-mba8xx.dts b/src/arm64/freescale/imx8dxp-tqma8xdp-mba8xx.dts
new file mode 100644
index 0000000000..f35514b7b3
--- /dev/null
+++ b/src/arm64/freescale/imx8dxp-tqma8xdp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP on MBa8Xx";
+	compatible = "tq,imx8dxp-tqma8xdp-mba8xx", "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
diff --git a/src/arm64/freescale/imx8dxp-tqma8xdp.dtsi b/src/arm64/freescale/imx8dxp-tqma8xdp.dtsi
new file mode 100644
index 0000000000..e2de8517aa
--- /dev/null
+++ b/src/arm64/freescale/imx8dxp-tqma8xdp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP";
+	compatible = "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
+
+&pmic_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/src/arm64/freescale/imx8dxp.dtsi b/src/arm64/freescale/imx8dxp.dtsi
new file mode 100644
index 0000000000..a8f7352332
--- /dev/null
+++ b/src/arm64/freescale/imx8dxp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/delete-node/ &A35_2;
+/delete-node/ &A35_3;
+
+&thermal_zones {
+	cpu0-thermal {
+		cooling-maps {
+			map0 {
+				cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/freescale/imx8mm-evk.dtsi b/src/arm64/freescale/imx8mm-evk.dtsi
index b53104ed89..bd5b365867 100644
--- a/src/arm64/freescale/imx8mm-evk.dtsi
+++ b/src/arm64/freescale/imx8mm-evk.dtsi
@@ -151,6 +151,28 @@
 			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 		};
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
 };
 
 &A53_0 {
@@ -434,6 +456,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 
@@ -509,6 +541,24 @@
 	status = "okay";
 };
 
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		 <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		      "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba",
+		      "pll8k", "pll11k";
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -636,6 +686,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
+			MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1        0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2        0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3        0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
@@ -666,6 +728,13 @@
 		>;
 	};
 
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
 	pinctrl_typec1: typec1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
diff --git a/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts b/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd6857..33f8d7d197 100644
--- a/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/src/arm64/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -25,23 +25,21 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_led>;
 
 		led1 {
 			label = "led1";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led2 {
 			label = "led2";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
 		};
 
 		led3 {
 			label = "led3";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -52,24 +50,12 @@
 
 	reg_rst_eth2: regulator-rst-eth2 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 		regulator-name = "rst-usb-eth2";
 	};
 
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
-		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "usb1-vbus";
-	};
-
 	reg_vdd_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -80,9 +66,6 @@
 };
 
 &ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	can@0 {
@@ -91,7 +74,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can>;
 		clocks = <&osc_can>;
-		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
 		/*
 		 * Limit the SPI clock to 15 MHz to prevent issues
 		 * with corrupted data due to chip errata.
@@ -103,9 +86,6 @@
 };
 
 &ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeram@0 {
@@ -117,8 +97,8 @@
 
 &fec1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-connection-type = "rgmii-rxid";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 	status = "okay";
 
@@ -127,55 +107,101 @@
 		#size-cells = <0>;
 
 		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id4f51.e91b";
 			reg = <0>;
-			reset-assert-us = <1>;
-			reset-deassert-us = <15000>;
-			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
 
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_0      -> DIO1_OUT
+ *   GPIO_B_1      -> DIO2_OUT
+ */
 &gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1>;
-	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
-			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT",
+			  "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
 };
 
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio5>;
-	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_2      -> DIO3_OUT
+ *   GPIO_B_3      -> DIO4_OUT
+ */
+&gpio3 {
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT",
+			  "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
 };
 
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_4      -> DIO1_IN
+ *   GPIO_B_5      -> DIO2_IN
+ *   GPIO_B_6      -> DIO3_IN
+ *   GPIO_B_7      -> DIO4_IN
+ */
+&gpio4 {
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN",
+			  "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&i2c3 {
 	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reg = <0x2c>;
+		non-removable-ports = <0>, <3>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
+&reg_usb2_vbus {
+	status = "disabled";
+};
+
+&reg_usdhc2_vcc {
+	status = "disabled";
+};
+
+&reg_usdhc3_vcc {
+	status = "disabled";
+};
+
 &uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
 	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	uart-has-rtscts;
 	status = "okay";
@@ -183,8 +209,6 @@
 
 &usbotg1 {
 	dr_mode = "otg";
-	disable-over-current;
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -195,14 +219,17 @@
 	#size-cells = <0>;
 	status = "okay";
 
+	/* VBUS is controlled by the hub */
+	/delete-property/ vbus-supply;
+
 	usb1@1 {
-		compatible = "usb424,9514";
+		compatible = "usb424,2514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		usbnet: ethernet@1 {
-			compatible = "usb424,ec00";
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 		};
@@ -210,167 +237,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	vmmc-supply = <&reg_vdd_3v3>;
-	vqmmc-supply = <&reg_nvcc_sd>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &iomuxc {
 	pinctrl_can: cangrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
-			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
-			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
-			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
-			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* PHY RST */
-			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* ETH IRQ */
-		>;
-	};
-
-	pinctrl_gpio_led: gpioledgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
-			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x19
-		>;
-	};
-
-	pinctrl_gpio1: gpio1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
-			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
-			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
-			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
-			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
-			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
-		>;
-	};
-
-	pinctrl_gpio5: gpio5grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
-		>;
-	};
-
-	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
-		>;
-	};
-
-	pinctrl_usb_eth2: usbeth2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19  /* SDIO_B_PWR_EN */
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	pinctrl_usb_hub: usbhubgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
 		>;
 	};
 };
diff --git a/src/arm64/freescale/imx8mm-kontron-bl.dts b/src/arm64/freescale/imx8mm-kontron-bl.dts
index dcec57c203..aab8e24216 100644
--- a/src/arm64/freescale/imx8mm-kontron-bl.dts
+++ b/src/arm64/freescale/imx8mm-kontron-bl.dts
@@ -279,8 +279,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -292,19 +292,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -316,40 +316,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git a/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi b/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879b..663ae52b48 100644
--- a/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/src/arm64/freescale/imx8mm-kontron-osm-s.dtsi
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Kontron Electronics GmbH
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx8mm.dtsi"
 
@@ -28,6 +29,73 @@
 	chosen {
 		stdout-path = &uart3;
 	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB1";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB2";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_usdhc3_vcc: regulator-usdhc3-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+		enable-active-high;
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_B";
+	};
 };
 
 &A53_0 {
@@ -96,6 +164,79 @@
 	};
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0",
+			  "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "SDIO_A_WP";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2",
+			  "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6",
+			  "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&gpio5 {
+	gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2",
+			  "PWM_1", "PWM_0", "", "",
+			  "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)",
+			  "SPI_A_SCK", "SPI_A_CS0#", "", "",
+			  "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA",
+			  "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX",
+			  "UART_C_RX", "UART_C_TX";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -205,22 +346,86 @@
 		};
 	};
 
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		address-width = <16>;
+		pagesize = <32>;
+		size = <8192>;
+	};
+
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
-		trickle-diode-disable;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
 &uart3 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
 
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -233,6 +438,26 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	vmmc-supply = <&reg_usdhc3_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
@@ -241,6 +466,12 @@
 };
 
 &iomuxc {
+	pinctrl_csi_mck: csimckgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59 /* CAM_MCK */
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
@@ -250,10 +481,140 @@
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82 /* SPI_A_SDI_(IO0) */
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82 /* SPI_A_SDO_(IO1) */
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82 /* SPI_A_SCK */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19 /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_ecspi2_gpio: ecspi2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19 /* SPI_A_/WP_(IO2) */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* SPI_A_/HOLD_(IO3) */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82 /* SPI_B_SDI */
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82 /* SPI_B_SDO */
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82 /* SPI_B_SCK */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_enet_rmii: enetrmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER		0x56 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* GPIO_A_0 */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19 /* GPIO_A_1 */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* GPIO_A_2 */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* GPIO_A_3 */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19 /* GPIO_A_4 */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19 /* GPIO_A_5 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19 /* GPIO_A_6 */
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* GPIO_A_7 */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* GPIO_B_0 */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19 /* GPIO_B_1 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19 /* GPIO_C_5 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19 /* GPIO_C_4 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19 /* GPIO_C_0 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19 /* GPIO_C_1 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19 /* GPIO_C_2 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19 /* GPIO_C_3 */
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19 /* GPIO_B_2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19 /* GPIO_B_3 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19 /* GPIO_C_7 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19 /* GPIO_B_4 */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19 /* BOOT_SEL0# */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19 /* BOOT_SEL1# */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19 /* GPIO_B_5 */
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19 /* GPIO_B_6 */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19 /* GPIO_B_7 */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* GPIO_C_6 */
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083 /* I2C_B_SCL */
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19 /* PCIe_CLKREQ# */
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19 /* PCIe_A_PERST# */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19 /* PCIe_WAKE# */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19 /* PCIe_SM_ALERT */
 		>;
 	};
 
@@ -263,16 +624,113 @@
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x19 /* PWM_0 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19 /* PWM_1 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x19 /* PWM_2 */
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19 /* USB_A_EN */
+		>;
+	};
+
+	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19 /* USB_B_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19 /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* CARRIER_PWR_EN */
+		>;
+	};
+
 	pinctrl_rtc: rtcgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
 		>;
 	};
 
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0		0xd6 /* I2S_A_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0		0xd6 /* I2S_A_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1		0xd6 /* I2S_B_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1		0xd6 /* I2S_B_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK		0xd6 /* I2S_MCLK */
+			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC		0xd6 /* I2S_LRCLK */
+			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK		0xd6 /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0 /* UART_A_RX */
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0 /* UART_A_TX */
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0 /* UART_A_CTS */
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0 /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0 /* UART_B_RX */
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0 /* UART_B_TX */
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0 /* UART_B_CTS */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0 /* UART_B_RTS */
+		>;
+	};
+
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140 /* UART_CON_RX */
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140 /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x0 /* UART_C_RX */
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x0 /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19 /* USB_A_OC# */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC		0x19 /* USB_B_OC# */
 		>;
 	};
 
@@ -327,6 +785,103 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19 /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x90 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x90 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x90 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x90 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x90 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x90 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x90 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x90 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x90 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x90 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x94 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x94 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x94 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x94 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x94 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x94 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x94 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x94 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x94 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x94 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x96 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x96 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x96 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x96 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x96 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x96 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x96 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x96 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x96 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x96 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* SDIO_B_CD# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
diff --git a/src/arm64/freescale/imx8mm-kontron-sl.dtsi b/src/arm64/freescale/imx8mm-kontron-sl.dtsi
index 1f8326613e..2076148e08 100644
--- a/src/arm64/freescale/imx8mm-kontron-sl.dtsi
+++ b/src/arm64/freescale/imx8mm-kontron-sl.dtsi
@@ -237,8 +237,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git a/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts b/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
index ea6e8b8516..01b632b220 100644
--- a/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/src/arm64/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,6 +5,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
 #include "imx8mm-tqma8mqml.dtsi"
 #include "mba8mx.dtsi"
 
@@ -74,19 +76,23 @@
 };
 
 &pcie_phy {
-	clocks = <&pcie0_refclk>;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcieclk 2>;
+	clock-names = "ref";
 	status = "okay";
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 3>,
 		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
-				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
-				<&clk IMX8MM_SYS_PLL2_250M>;
+				 <&clk IMX8MM_SYS_PLL2_250M>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi b/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
index 6425773f68..41c966147b 100644
--- a/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/src/arm64/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,25 +47,20 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
-/* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -144,9 +139,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -204,20 +200,13 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
@@ -234,4 +223,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
diff --git a/src/arm64/freescale/imx8mm-venice-gw7901.dts b/src/arm64/freescale/imx8mm-venice-gw7901.dts
index 87b80e2412..5e2cbaf27e 100644
--- a/src/arm64/freescale/imx8mm-venice-gw7901.dts
+++ b/src/arm64/freescale/imx8mm-venice-gw7901.dts
@@ -285,7 +285,8 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	flash@0 {
@@ -294,6 +295,12 @@
 		spi-max-frequency = <40000000>;
 		status = "okay";
 	};
+
+	tpm@1 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &fec1 {
@@ -319,7 +326,7 @@
 
 &gpio4 {
 	gpio-line-names = "", "", "", "",
-		"", "", "uart3_rs232#", "uart3_rs422#",
+		"dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#",
 		"uart3_rs485#", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
@@ -842,6 +849,8 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x40000041 /* DIG2_CTL */
 			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
 			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
 			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
@@ -987,6 +996,7 @@
 			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
 			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x140
 		>;
 	};
 
diff --git a/src/arm64/freescale/imx8mn-beacon-kit.dts b/src/arm64/freescale/imx8mn-beacon-kit.dts
index 35b8d2060c..bbd80896db 100644
--- a/src/arm64/freescale/imx8mn-beacon-kit.dts
+++ b/src/arm64/freescale/imx8mn-beacon-kit.dts
@@ -99,8 +99,6 @@
 };
 
 &lcdif {
-	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
-	assigned-clock-rates = <594000000>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8mn-evk.dtsi b/src/arm64/freescale/imx8mn-evk.dtsi
index a0e13d3324..269e70f66a 100644
--- a/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/src/arm64/freescale/imx8mn-evk.dtsi
@@ -110,6 +110,20 @@
 		spdif-out;
 		spdif-in;
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
 };
 
 &easrc {
@@ -285,6 +299,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 
@@ -522,6 +546,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXC_PDM_CLK		0xd6
+			MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC	0xd6
+			MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2	0xd6
+			MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
diff --git a/src/arm64/freescale/imx8mn-rve-gateway.dts b/src/arm64/freescale/imx8mn-rve-gateway.dts
index 1b633bd1eb..ea1855171f 100644
--- a/src/arm64/freescale/imx8mn-rve-gateway.dts
+++ b/src/arm64/freescale/imx8mn-rve-gateway.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "RVE gateway";
-	compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+	compatible = "rve,gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
 
 	crystal_duart_24m: crystal-duart-24m {
 		compatible = "fixed-clock";
diff --git a/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
new file mode 100644
index 0000000000..96db07fc9b
--- /dev/null
+++ b/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mn-pinfunc.h"
+
+&{/} {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+};
+
+&rst_usb_hub_hog {
+	output-low;
+};
+
+&sel_usb_hub_hog {
+	output-low;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	/delete-property/ disable-over-current;
+	over-current-active-low;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_usb1_connector: usb1-connectorgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+};
diff --git a/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index c07d59147a..433d8bba44 100644
--- a/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/src/arm64/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -41,7 +41,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0hub_sel>;
 
-	sel-usb-hub-hog {
+	sel_usb_hub_hog: sel-usb-hub-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -198,8 +198,7 @@
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/src/arm64/freescale/imx8mn.dtsi b/src/arm64/freescale/imx8mn.dtsi
index 136e75c512..932c8b05c7 100644
--- a/src/arm64/freescale/imx8mn.dtsi
+++ b/src/arm64/freescale/imx8mn.dtsi
@@ -1168,7 +1168,7 @@
 							 <&clk IMX8MN_SYS_PLL1_800M>;
 				assigned-clock-rates = <266000000>,
 						       <24000000>,
-						       <594000000>,
+						       <24000000>,
 						       <500000000>,
 						       <200000000>;
 				#power-domain-cells = <1>;
diff --git a/src/arm64/freescale/imx8mp-beacon-som.dtsi b/src/arm64/freescale/imx8mp-beacon-som.dtsi
index e5da908047..8be251b693 100644
--- a/src/arm64/freescale/imx8mp-beacon-som.dtsi
+++ b/src/arm64/freescale/imx8mp-beacon-som.dtsi
@@ -50,6 +50,8 @@
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
 	status = "okay";
 
 	mdio {
@@ -66,6 +68,71 @@
 			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
 };
 
 &flexspi {
@@ -206,6 +273,10 @@
 	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8997-bt";
+	};
 };
 
 &usdhc1 {
diff --git a/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts b/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts
index 5828c9d782..7e1b58dbe2 100644
--- a/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/src/arm64/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -45,6 +46,19 @@
 		clock-frequency = <25000000>;
 	};
 
+	clk_pwm4: clock-pwm4 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "codec-pwm4";
+		/*
+		 * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz
+		 * and the calculated PWM period is 1 and duty cycle is 50%, the
+		 * result is exactly 12 MHz, which is fine for SGTL5000 MCLK.
+		 */
+		pwms = <&pwm4 0 83 0>;
+	};
+
 	panel: panel {
 		/* Compatible string is filled in by panel board DT Overlay. */
 		backlight = <&backlight>;
@@ -82,6 +96,24 @@
 		vin-supply = <&buck4>;
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
 	watchdog { /* TPS3813 */
 		compatible = "linux,wdt-gpio";
 		pinctrl-names = "default";
@@ -121,7 +153,7 @@
 	flash@0 {	/* W25Q128JVEI */
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-max-frequency = <40000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 	};
@@ -288,6 +320,15 @@
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_pwm4>;
+		VDDA-supply = <&buck4>;
+		VDDIO-supply = <&buck4>;
+	};
+
 	usb-hub@2c {
 		compatible = "microchip,usb2514bi";
 		reg = <0x2c>;
@@ -429,6 +470,21 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_panel_pwm>;
@@ -436,6 +492,23 @@
 	status = "disabled";
 };
 
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	#clock-cells = <0>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	status = "okay";
+};
+
 /* SD slot */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -785,6 +858,12 @@
 		>;
 	};
 
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0xd6
+		>;
+	};
+
 	pinctrl_rtc: rtc-grp {
 		fsl,pins = <
 			/* RTC_IRQ# */
@@ -816,7 +895,6 @@
 			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
 			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
 			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
-			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
 			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
 		>;
 	};
diff --git a/src/arm64/freescale/imx8mp-evk.dts b/src/arm64/freescale/imx8mp-evk.dts
index f87fa5a948..9beba8d6a0 100644
--- a/src/arm64/freescale/imx8mp-evk.dts
+++ b/src/arm64/freescale/imx8mp-evk.dts
@@ -23,7 +23,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -107,6 +107,13 @@
 		enable-active-high;
 	};
 
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -364,7 +371,7 @@
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -415,14 +422,16 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -431,7 +440,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -439,7 +448,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -524,7 +533,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
diff --git a/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts b/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts
index c8640cac3e..00a240484c 100644
--- a/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/src/arm64/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -19,6 +19,30 @@
 		stdout-path = &uart1;
 	};
 
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <11>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		num-interpolated-steps = <2>;
+		power-supply = <&reg_lvds1_reg_en>;
+		pwms = <&pwm3 0 50000 0>;
+	};
+
+	panel1_lvds: panel-lvds {
+		compatible = "edt,etml1010g3dra";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vcc_3v3_sw>;
+
+		port {
+			panel1_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -39,6 +63,15 @@
 		regulator-name = "can2-stby";
 	};
 
+	reg_lvds1_reg_en: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "lvds1_reg_en";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -61,6 +94,13 @@
 		startup-delay-us = <100>;
 		off-on-delay-us = <12000>;
 	};
+
+	reg_vcc_3v3_sw: regulator-vcc-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &eqos {
@@ -135,10 +175,41 @@
 	};
 };
 
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel1_in>;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
 /* debug console */
 &uart1 {
 	pinctrl-names = "default";
@@ -239,12 +310,12 @@
 			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
 			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
 			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x12
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x12
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x12
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x12
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12
 			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
 		>;
 	};
@@ -289,16 +360,34 @@
 		>;
 	};
 
+	pinctrl_lvds1: lvds1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x12
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x12
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x1C0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
 		>;
 	};
 
@@ -319,7 +408,7 @@
 
 	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40
 		>;
 	};
 
diff --git a/src/arm64/freescale/imx8mp-phycore-som.dtsi b/src/arm64/freescale/imx8mp-phycore-som.dtsi
index c976c3b6cb..e6ffa6a6b6 100644
--- a/src/arm64/freescale/imx8mp-phycore-som.dtsi
+++ b/src/arm64/freescale/imx8mp-phycore-som.dtsi
@@ -175,7 +175,6 @@
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
-		trickle-resistor-ohms = <3000>;
 	};
 };
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
index 0e8d0f3c7e..e7bf032265 100644
--- a/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw71xx.dtsi
@@ -63,8 +63,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -228,6 +235,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
index 41c79d2ebd..f24b147447 100644
--- a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
@@ -14,6 +14,7 @@
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -183,7 +184,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
index d5c400b355..f5491a608b 100644
--- a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
@@ -14,6 +14,7 @@
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -202,7 +203,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8mp-verdin.dtsi b/src/arm64/freescale/imx8mp-verdin.dtsi
index c3305f0d40..faa17cbbe2 100644
--- a/src/arm64/freescale/imx8mp-verdin.dtsi
+++ b/src/arm64/freescale/imx8mp-verdin.dtsi
@@ -552,7 +552,7 @@
 				regulator-name = "On-module +V3.3_ADC (LDO4)";
 			};
 
-			LDO5 {
+			reg_vdd_sdio: LDO5 {
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -885,6 +885,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_vdd_sdio>;
 };
 
 /* On-module eMMC */
diff --git a/src/arm64/freescale/imx8mp.dtsi b/src/arm64/freescale/imx8mp.dtsi
index 39a550c1cd..8141926e4e 100644
--- a/src/arm64/freescale/imx8mp.dtsi
+++ b/src/arm64/freescale/imx8mp.dtsi
@@ -1636,8 +1636,10 @@
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pclk", "wrap", "phy", "axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_CLK_24M>;
 				assigned-clock-rates = <500000000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
 				status = "disabled";
@@ -1670,8 +1672,10 @@
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pclk", "wrap", "phy", "axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_CLK_24M>;
 				assigned-clock-rates = <266000000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
 				status = "disabled";
diff --git a/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts b/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
index b302daca4c..0165f3a259 100644
--- a/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/src/arm64/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -28,18 +28,6 @@
 		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	pcie1_refclk: pcie1-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -103,23 +91,24 @@
 	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&pcie0_refclk>,
-		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&pcieclk 3>,
+		 <&pcieclk 2>,
 		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	status = "okay";
 };
 
 /*
- * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as
  * static gpio hog.
  */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&pcie1_refclk>,
-		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&pcieclk 1>,
+		 <&pcieclk 0>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	status = "okay";
 };
@@ -171,6 +160,7 @@
 };
 
 &usb3_phy1 {
+	vbus-supply = <&reg_hub_vbus>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8qm-apalis-eval-v1.2.dts b/src/arm64/freescale/imx8qm-apalis-eval-v1.2.dts
new file mode 100644
index 0000000000..8466a8204e
--- /dev/null
+++ b/src/arm64/freescale/imx8qm-apalis-eval-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-eval-v1.2",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/src/arm64/freescale/imx8qm-apalis-eval.dts b/src/arm64/freescale/imx8qm-apalis-eval.dts
index 5ab0921eb5..b0ebf6d054 100644
--- a/src/arm64/freescale/imx8qm-apalis-eval.dts
+++ b/src/arm64/freescale/imx8qm-apalis-eval.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "imx8qm-apalis.dtsi"
-#include "imx8-apalis-eval.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
 
 / {
 	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
diff --git a/src/arm64/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts b/src/arm64/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
new file mode 100644
index 0000000000..92c0ae0c03
--- /dev/null
+++ b/src/arm64/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-v1.1-eval-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/delete-property/ no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/delete-property/ no-1-8-v;
+};
diff --git a/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts b/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts
index c8ff758315..c998e542f9 100644
--- a/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts
+++ b/src/arm64/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "imx8qm-apalis-v1.1.dtsi"
-#include "imx8-apalis-eval.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
 
 / {
 	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
diff --git a/src/arm64/freescale/imx8qm-mek.dts b/src/arm64/freescale/imx8qm-mek.dts
index 6d50838ad1..77ac0efdfa 100644
--- a/src/arm64/freescale/imx8qm-mek.dts
+++ b/src/arm64/freescale/imx8qm-mek.dts
@@ -41,6 +41,18 @@
 	};
 };
 
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
@@ -104,6 +116,20 @@
 };
 
 &iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
+			IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpio-grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_LSIO_GPIO0_IO14		0xc600004c
+			IMX8QM_GPT0_CAPTURE_LSIO_GPIO0_IO15	0xc600004c
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
diff --git a/src/arm64/freescale/imx8qm-ss-conn.dtsi b/src/arm64/freescale/imx8qm-ss-conn.dtsi
index ec1639174e..545e175c88 100644
--- a/src/arm64/freescale/imx8qm-ss-conn.dtsi
+++ b/src/arm64/freescale/imx8qm-ss-conn.dtsi
@@ -6,20 +6,25 @@
 
 &fec1 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &fec2 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &usdhc1 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc2 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc3 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
diff --git a/src/arm64/freescale/imx8qm-ss-dma.dtsi b/src/arm64/freescale/imx8qm-ss-dma.dtsi
index 69cb867673..aa9f28c443 100644
--- a/src/arm64/freescale/imx8qm-ss-dma.dtsi
+++ b/src/arm64/freescale/imx8qm-ss-dma.dtsi
@@ -17,6 +17,32 @@
 		power-domains = <&pd IMX_SC_R_UART_4>;
 	};
 
+	i2c4: i2c@5a840000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x5a840000 0x4000>;
+		interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c4_lpcg 0>,
+			 <&i2c4_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+		status = "disabled";
+	};
+
+	i2c4_lpcg: clock-controller@5ac40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c4_lpcg_clk",
+				     "i2c4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+	};
+
 	can1_lpcg: clock-controller@5ace0000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ace0000 0x10000>;
@@ -96,15 +122,30 @@
 	status = "okay";
 };
 
+/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */
 &edma3 {
+	reg = <0x5a9f0000 0x210000>;
+	dma-channels = <10>;
+	interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
 	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
-		     <&pd IMX_SC_R_DMA_1_CH1>,
-		     <&pd IMX_SC_R_DMA_1_CH2>,
-		     <&pd IMX_SC_R_DMA_1_CH3>,
-		     <&pd IMX_SC_R_DMA_1_CH4>,
-		     <&pd IMX_SC_R_DMA_1_CH5>,
-		     <&pd IMX_SC_R_DMA_1_CH6>,
-		     <&pd IMX_SC_R_DMA_1_CH7>;
+			<&pd IMX_SC_R_DMA_1_CH1>,
+			<&pd IMX_SC_R_DMA_1_CH2>,
+			<&pd IMX_SC_R_DMA_1_CH3>,
+			<&pd IMX_SC_R_DMA_1_CH4>,
+			<&pd IMX_SC_R_DMA_1_CH5>,
+			<&pd IMX_SC_R_DMA_1_CH6>,
+			<&pd IMX_SC_R_DMA_1_CH7>,
+			<&pd IMX_SC_R_DMA_1_CH8>,
+			<&pd IMX_SC_R_DMA_1_CH9>;
 };
 
 &flexcan1 {
@@ -112,15 +153,15 @@
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
diff --git a/src/arm64/freescale/imx8qm.dtsi b/src/arm64/freescale/imx8qm.dtsi
index 31744fc1ab..b3d01677b7 100644
--- a/src/arm64/freescale/imx8qm.dtsi
+++ b/src/arm64/freescale/imx8qm.dtsi
@@ -265,6 +265,47 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	system-controller {
 		compatible = "fsl,imx-scu";
 		mbox-names = "tx0",
diff --git a/src/arm64/freescale/imx8qxp-tqma8xqp-mba8xx.dts b/src/arm64/freescale/imx8qxp-tqma8xqp-mba8xx.dts
new file mode 100644
index 0000000000..7d2e98bf8b
--- /dev/null
+++ b/src/arm64/freescale/imx8qxp-tqma8xqp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP on MBa8Xx";
+	compatible = "tq,imx8qxp-tqma8xqp-mba8xx", "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/src/arm64/freescale/imx8qxp-tqma8xqp.dtsi b/src/arm64/freescale/imx8qxp-tqma8xqp.dtsi
new file mode 100644
index 0000000000..b14040bf4d
--- /dev/null
+++ b/src/arm64/freescale/imx8qxp-tqma8xqp.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP";
+	compatible = "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/src/arm64/freescale/imx8qxp.dtsi b/src/arm64/freescale/imx8qxp.dtsi
index 958267b333..10e16d84c0 100644
--- a/src/arm64/freescale/imx8qxp.dtsi
+++ b/src/arm64/freescale/imx8qxp.dtsi
@@ -260,6 +260,13 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
 	xtal32k: clock-xtal32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -310,6 +317,7 @@
 	/* sorted in register address */
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
diff --git a/src/arm64/freescale/imx8ulp-evk.dts b/src/arm64/freescale/imx8ulp-evk.dts
index 69dd8e3102..24bb253b93 100644
--- a/src/arm64/freescale/imx8ulp-evk.dts
+++ b/src/arm64/freescale/imx8ulp-evk.dts
@@ -37,7 +37,7 @@
 			no-map;
 		};
 
-		rsc_table: rsc-table@1fff8000{
+		rsc_table: rsc-table@1fff8000 {
 			reg = <0 0x1fff8000 0 0x1000>;
 			no-map;
 		};
diff --git a/src/arm64/freescale/imx93-phyboard-segin.dts b/src/arm64/freescale/imx93-phyboard-segin.dts
new file mode 100644
index 0000000000..85fb188b05
--- /dev/null
+++ b/src/arm64/freescale/imx93-phyboard-segin.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SD";
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	no-1-8-v;
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x179e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK            0x179e
+			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK            0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx93-phycore-som.dtsi b/src/arm64/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 0000000000..88c2657b50
--- /dev/null
+++ b/src/arm64/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/* Ethernet */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+			  <&clk IMX93_CLK_ENET_REF>,
+			  <&clk IMX93_CLK_ENET_REF_PHY>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>, <50000000>;
+	status = "okay";
+
+	mdio: mdio {
+		clock-frequency = <5000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RX_ER			0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x179e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x1386
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x1386
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x1386
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x1386
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x1386
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x1386
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x1386
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx93-tqma9352.dtsi b/src/arm64/freescale/imx93-tqma9352.dtsi
index f6e422dc26..9d2328c185 100644
--- a/src/arm64/freescale/imx93-tqma9352.dtsi
+++ b/src/arm64/freescale/imx93-tqma9352.dtsi
@@ -122,10 +122,8 @@
 
 	/* protectable identification memory (part of M24C64-D @57) */
 	eeprom@5f {
-		compatible = "st,24c64", "atmel,24c64";
+		compatible = "atmel,24c64d-wl";
 		reg = <0x5f>;
-		size = <32>;
-		pagesize = <32>;
 		vcc-supply = <&reg_v3v3>;
 	};
 
diff --git a/src/arm64/freescale/imx93-var-som-symphony.dts b/src/arm64/freescale/imx93-var-som-symphony.dts
new file mode 100644
index 0000000000..576d6982a4
--- /dev/null
+++ b/src/arm64/freescale/imx93-var-som-symphony.dts
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx93-var-som.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 on Symphony evaluation board";
+	compatible = "variscite,var-som-mx93-symphony",
+		     "variscite,var-som-mx93", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/*
+	 * Needed only for Symphony <= v1.5
+	 */
+	reg_fec_phy: regulator-fec-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethosu_mem: ethosu-region@88000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x0 0x88000000 0x0 0x8000000>;
+		};
+
+		vdev0vring0: vdev0vring0@87ee0000 {
+			reg = <0 0x87ee0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@87ee8000 {
+			reg = <0 0x87ee8000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@87ef0000 {
+			reg = <0 0x87ef0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@87ef8000 {
+			reg = <0 0x87ef8000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@87f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87f00000 0 0x100000>;
+			no-map;
+		};
+
+		ele_reserved: ele-reserved@87de0000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87de0000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/* Use external instead of internal RTC*/
+&bbnsm_rtc {
+	status = "disabled";
+};
+
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@5 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <5>;
+			qca,disable-smarteee;
+			eee-broken-1000t;
+			reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+	scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c5_gpio>;
+	scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* J18.7, J18.9 */
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX                       0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX               0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c1_gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__GPIO1_IO00			0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__GPIO2_IO23			0x31e
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x31e
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx93-var-som.dtsi b/src/arm64/freescale/imx93-var-som.dtsi
new file mode 100644
index 0000000000..783938245e
--- /dev/null
+++ b/src/arm64/freescale/imx93-var-som.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 module";
+	compatible = "variscite,var-som-mx93", "fsl,imx93";
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>,	/* WIFI_RESET */
+			      <&gpio3 7 GPIO_ACTIVE_LOW>;	/* WIFI_PWR_EN */
+	};
+
+	reg_eqos_phy: regulator-eqos-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eqos_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <1000000>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_reg_eqos_phy: regeqosgrp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__GPIO1_IO07			0x51e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
diff --git a/src/arm64/freescale/imx93.dtsi b/src/arm64/freescale/imx93.dtsi
index 8f2e7c42ad..601c94e1fa 100644
--- a/src/arm64/freescale/imx93.dtsi
+++ b/src/arm64/freescale/imx93.dtsi
@@ -294,7 +294,7 @@
 				status = "disabled";
 			};
 
-			i3c1: i3c-master@44330000 {
+			i3c1: i3c@44330000 {
 				compatible = "silvaco,i3c-master-v1";
 				reg = <0x44330000 0x10000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -671,7 +671,7 @@
 				status = "disabled";
 			};
 
-			i3c2: i3c-master@42520000 {
+			i3c2: i3c@42520000 {
 				compatible = "silvaco,i3c-master-v1";
 				reg = <0x42520000 0x10000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/src/arm64/freescale/mba8mx.dtsi b/src/arm64/freescale/mba8mx.dtsi
index e2bc53b8d3..427467df42 100644
--- a/src/arm64/freescale/mba8mx.dtsi
+++ b/src/arm64/freescale/mba8mx.dtsi
@@ -29,6 +29,12 @@
 		stdout-path = &uart3;
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -100,12 +106,6 @@
 		};
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_12v: regulator-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "MBA8MX_12V";
@@ -219,7 +219,7 @@
 			line-name = "BOOT_CFG_OE#";
 		};
 
-		rst-usb-hub-hog {
+		rst_usb_hub_hog: rst-usb-hub-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
@@ -264,6 +264,13 @@
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clk@68 {
+		compatible = "renesas,9fgv0441";
+		reg = <0x68>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c3 {
diff --git a/src/arm64/freescale/mba8xx.dtsi b/src/arm64/freescale/mba8xx.dtsi
new file mode 100644
index 0000000000..276d1683b0
--- /dev/null
+++ b/src/arm64/freescale/mba8xx.dtsi
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	adc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>;
+	};
+
+	aliases {
+		rtc0 = &pcf85063;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl_lvds>;
+		pwms = <&adma_pwm 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* TODO LVDS panels */
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie_1v5: regulator-pcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_1V5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_1v5>;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	reg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_3V3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_mb: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		ssi-controller = <&sai1>;
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_1v8>;
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&adma_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_admapwm>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy3>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	se97b_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	at24c02_54: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9538>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+
+		gpio-line-names = "", "LED_A",
+				  "LED_B", "",
+				  "DSI_EN", "USB_RESET#",
+				  "V_12V_EN", "PCIE_DIS#";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2gpio>;
+	scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* TODO LDB */
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi3>;
+	num-cs = <2>;
+	cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lsgpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "X4_15",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* TODO: Mini-PCIe */
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3v3_mb>;
+	no-1-8-v;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0	0x02000060>,
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1	0x02000060>,
+			   <IMX8QXP_ADC_IN2_ADMA_ADC_IN2	0x02000060>,
+			   <IMX8QXP_ADC_IN3_ADMA_ADC_IN3	0x02000060>;
+	};
+
+	pinctrl_admapwm: admapwmgrp {
+		fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_bl_lvds: bllvdsgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000021>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX		0x00000021>,
+			   <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX		0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX		0x00000021>,
+			   <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX		0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02		0x00000040>,
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x00000040>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x00000040>,
+			   <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttonsgrp {
+		fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000020>,
+			   <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14	0x00000020>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c2gpio: lpi2c2gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x06000021>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX	0x06000020>,
+			   <IMX8QXP_UART1_TX_ADMA_UART1_TX	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX	0x06000020>,
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX	0x06000020>;
+	};
+
+	pinctrl_lsgpio3: lsgpio3grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15	0x00000021>;
+	};
+
+	pinctrl_pca9538: pca9538grp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000020>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	};
+
+	pinctrl_reg_pcie_1v5: regpcie1v5grp {
+		fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30	0x00000021>;
+	};
+
+	pinctrl_reg_pcie_3v3: regpcie3v3grp {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000041>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC		0x06000041>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000041>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI	0x00000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO	0x00000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK	0x00000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27	0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29	0x00000021>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK	0x00000041>,
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI	0x00000041>,
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO	0x00000041>,
+			   <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_spi3: spi3grp {
+		fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK	0x00000041>,
+			   <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI	0x00000041>,
+			   <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO	0x00000041>,
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16	0x00000021>,
+			   <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1	0x00000021>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/src/arm64/freescale/tqma8xx.dtsi b/src/arm64/freescale/tqma8xx.dtsi
new file mode 100644
index 0000000000..d98469a7c4
--- /dev/null
+++ b/src/arm64/freescale/tqma8xx.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+/* TQMa8Xx only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+/* TODO GPU */
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1gpio>;
+	scl-gpios = <&lsio_gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	at24c02: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	m24c64: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic_thermal: pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&reg_1v8>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0600004d
+			IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0600004d
+			IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0600004d
+			IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0600004d
+			IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS	0x0600004d
+			IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0600004d
+			IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0600004d
+			IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0600004d
+			IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0600004d
+			IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0600004d
+			IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS	0x0600004d
+			IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0600004d
+			IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0600004d
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021
+		>;
+	};
+
+	pinctrl_lpi2c1gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28	0x06000021
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+};
diff --git a/src/arm64/intel/socfpga_agilex5.dtsi b/src/arm64/intel/socfpga_agilex5.dtsi
index d66d425e45..1162978329 100644
--- a/src/arm64/intel/socfpga_agilex5.dtsi
+++ b/src/arm64/intel/socfpga_agilex5.dtsi
@@ -202,7 +202,7 @@
 			status = "disabled";
 		};
 
-		i3c0: i3c-master@10da0000 {
+		i3c0: i3c@10da0000 {
 			compatible = "snps,dw-i3c-master-1.00a";
 			reg = <0x10da0000 0x1000>;
 			#address-cells = <3>;
@@ -212,7 +212,7 @@
 			status = "disabled";
 		};
 
-		i3c1: i3c-master@10da1000 {
+		i3c1: i3c@10da1000 {
 			compatible = "snps,dw-i3c-master-1.00a";
 			reg = <0x10da1000 0x1000>;
 			#address-cells = <3>;
diff --git a/src/arm64/marvell/ac5-98dx25xx.dtsi b/src/arm64/marvell/ac5-98dx25xx.dtsi
index b5e042b8e9..5591939e05 100644
--- a/src/arm64/marvell/ac5-98dx25xx.dtsi
+++ b/src/arm64/marvell/ac5-98dx25xx.dtsi
@@ -77,7 +77,6 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		dma-ranges;
 
 		internal-regs@7f000000 {
 			#address-cells = <1>;
@@ -204,6 +203,30 @@
 			};
 		};
 
+		mmc_dma: bus@80500000 {
+				compatible = "simple-bus";
+				ranges;
+				#address-cells = <0x2>;
+				#size-cells = <0x2>;
+				reg = <0x0 0x80500000 0x0 0x100000>;
+				dma-ranges = <0x0 0x0 0x2 0x0 0x0 0x80000000>;
+				dma-coherent;
+
+				sdhci: mmc@805c0000 {
+					compatible = "marvell,ac5-sdhci",
+						     "marvell,armada-ap806-sdhci";
+					reg = <0x0 0x805c0000 0x0 0x1000>;
+					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&emmc_clock>, <&cnm_clock>;
+					clock-names = "core", "axi";
+					bus-width = <8>;
+					non-removable;
+					mmc-ddr-1_8v;
+					mmc-hs200-1_8v;
+					mmc-hs400-1_8v;
+				};
+		};
+
 		/*
 		 * Dedicated section for devices behind 32bit controllers so we
 		 * can configure specific DMA mapping for them
@@ -335,5 +358,11 @@
 			#clock-cells = <0>;
 			clock-frequency = <400000000>;
 		};
+
+		emmc_clock: emmc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 };
diff --git a/src/arm64/marvell/ac5-98dx35xx-rd.dts b/src/arm64/marvell/ac5-98dx35xx-rd.dts
index f0ebdb84ee..0c973d7a21 100644
--- a/src/arm64/marvell/ac5-98dx35xx-rd.dts
+++ b/src/arm64/marvell/ac5-98dx35xx-rd.dts
@@ -99,3 +99,7 @@
 		};
 	};
 };
+
+&sdhci {
+	status = "okay";
+};
diff --git a/src/arm64/marvell/armada-37xx.dtsi b/src/arm64/marvell/armada-37xx.dtsi
index e300145ad1..1cc3fa1c35 100644
--- a/src/arm64/marvell/armada-37xx.dtsi
+++ b/src/arm64/marvell/armada-37xx.dtsi
@@ -431,14 +431,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
diff --git a/src/arm64/marvell/armada-ap807.dtsi b/src/arm64/marvell/armada-ap807.dtsi
index 4a23f65d47..a3328d05fc 100644
--- a/src/arm64/marvell/armada-ap807.dtsi
+++ b/src/arm64/marvell/armada-ap807.dtsi
@@ -33,3 +33,6 @@
 		     "marvell,armada-ap806-sdhci"; /* Backward compatibility */
 };
 
+&ap_thermal {
+	compatible = "marvell,armada-ap807-thermal";
+};
diff --git a/src/arm64/marvell/armada-cp11x.dtsi b/src/arm64/marvell/armada-cp11x.dtsi
index 4ec1aae0a3..7e595ac800 100644
--- a/src/arm64/marvell/armada-cp11x.dtsi
+++ b/src/arm64/marvell/armada-cp11x.dtsi
@@ -511,14 +511,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
diff --git a/src/arm64/mediatek/mt2712-evb.dts b/src/arm64/mediatek/mt2712-evb.dts
index fffdb7bbf8..234e3b23d7 100644
--- a/src/arm64/mediatek/mt2712-evb.dts
+++ b/src/arm64/mediatek/mt2712-evb.dts
@@ -43,12 +43,12 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb1: extcon_iddig1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb_p0_vbus: regulator-usb-p0-vbus {
@@ -129,7 +129,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -156,7 +156,7 @@
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -182,14 +182,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git a/src/arm64/mediatek/mt2712e.dtsi b/src/arm64/mediatek/mt2712e.dtsi
index ed1a9d3194..082672efba 100644
--- a/src/arm64/mediatek/mt2712e.dtsi
+++ b/src/arm64/mediatek/mt2712e.dtsi
@@ -249,10 +249,11 @@
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
@@ -261,7 +262,7 @@
 		#clock-cells = <1>;
 	};
 
-	syscfg_pctl_a: syscfg_pctl_a@10005000 {
+	syscfg_pctl_a: syscon@10005000 {
 		compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
 		reg = <0 0x10005000 0 0x1000>;
 	};
diff --git a/src/arm64/mediatek/mt6797.dtsi b/src/arm64/mediatek/mt6797.dtsi
index c3677d77e0..0e9d11b458 100644
--- a/src/arm64/mediatek/mt6797.dtsi
+++ b/src/arm64/mediatek/mt6797.dtsi
@@ -117,7 +117,7 @@
 		#clock-cells = <1>;
 	};
 
-	infrasys: infracfg_ao@10001000 {
+	infrasys: syscon@10001000 {
 		compatible = "mediatek,mt6797-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
@@ -452,19 +452,19 @@
 		#clock-cells = <1>;
 	};
 
-	imgsys: imgsys_config@15000000  {
+	imgsys: syscon@15000000  {
 		compatible = "mediatek,mt6797-imgsys", "syscon";
 		reg = <0 0x15000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	vdecsys: vdec_gcon@16000000 {
+	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt6797-vdecsys", "syscon";
 		reg = <0 0x16000000 0 0x10000>;
 		#clock-cells = <1>;
 	};
 
-	vencsys: venc_gcon@17000000 {
+	vencsys: syscon@17000000 {
 		compatible = "mediatek,mt6797-vencsys", "syscon";
 		reg = <0 0x17000000 0 0x1000>;
 		#clock-cells = <1>;
diff --git a/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts b/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
index a1f42048dc..224bb28966 100644
--- a/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/src/arm64/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -75,6 +75,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -185,6 +186,18 @@
 					label = "lan3";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
diff --git a/src/arm64/mediatek/mt7622-rfb1.dts b/src/arm64/mediatek/mt7622-rfb1.dts
index 2dc1bdc74e..41629769bd 100644
--- a/src/arm64/mediatek/mt7622-rfb1.dts
+++ b/src/arm64/mediatek/mt7622-rfb1.dts
@@ -57,6 +57,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -117,6 +118,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -155,6 +168,18 @@
 					label = "wan";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
diff --git a/src/arm64/mediatek/mt7622.dtsi b/src/arm64/mediatek/mt7622.dtsi
index 3ee9266fa8..917fa39a74 100644
--- a/src/arm64/mediatek/mt7622.dtsi
+++ b/src/arm64/mediatek/mt7622.dtsi
@@ -252,7 +252,7 @@
 		clock-names = "hif_sel";
 	};
 
-	cir: cir@10009000 {
+	cir: ir-receiver@10009000 {
 		compatible = "mediatek,mt7622-cir";
 		reg = <0 0x10009000 0 0x1000>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
@@ -283,16 +283,14 @@
 		};
 	};
 
-	apmixedsys: apmixedsys@10209000 {
-		compatible = "mediatek,mt7622-apmixedsys",
-			     "syscon";
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
 		reg = <0 0x10209000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	topckgen: topckgen@10210000 {
-		compatible = "mediatek,mt7622-topckgen",
-			     "syscon";
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
 		reg = <0 0x10210000 0 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -515,7 +513,6 @@
 			 <&pericfg CLK_PERI_AUXADC_PD>;
 		clock-names = "therm", "auxadc";
 		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-		reset-names = "therm";
 		mediatek,auxadc = <&auxadc>;
 		mediatek,apmixedsys = <&apmixedsys>;
 		nvmem-cells = <&thermal_calibration>;
@@ -734,9 +731,8 @@
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
 	};
 
-	ssusbsys: ssusbsys@1a000000 {
-		compatible = "mediatek,mt7622-ssusbsys",
-			     "syscon";
+	ssusbsys: clock-controller@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -793,9 +789,8 @@
 		};
 	};
 
-	pciesys: pciesys@1a100800 {
-		compatible = "mediatek,mt7622-pciesys",
-			     "syscon";
+	pciesys: clock-controller@1a100800 {
+		compatible = "mediatek,mt7622-pciesys";
 		reg = <0 0x1a100800 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -921,12 +916,13 @@
 		};
 	};
 
-	hifsys: syscon@1af00000 {
-		compatible = "mediatek,mt7622-hifsys", "syscon";
+	hifsys: clock-controller@1af00000 {
+		compatible = "mediatek,mt7622-hifsys";
 		reg = <0 0x1af00000 0 0x70>;
+		#clock-cells = <1>;
 	};
 
-	ethsys: syscon@1b000000 {
+	ethsys: clock-controller@1b000000 {
 		compatible = "mediatek,mt7622-ethsys",
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
@@ -966,9 +962,7 @@
 	};
 
 	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7622-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
+		compatible = "mediatek,mt7622-eth";
 		reg = <0 0x1b100000 0 0x20000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
diff --git a/src/arm64/mediatek/mt7981b-xiaomi-ax3000t.dts b/src/arm64/mediatek/mt7981b-xiaomi-ax3000t.dts
new file mode 100644
index 0000000000..a314c3e05e
--- /dev/null
+++ b/src/arm64/mediatek/mt7981b-xiaomi-ax3000t.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "xiaomi,ax3000t", "mediatek,mt7981b";
+	model = "Xiaomi AX3000T";
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+};
diff --git a/src/arm64/mediatek/mt7981b.dtsi b/src/arm64/mediatek/mt7981b.dtsi
new file mode 100644
index 0000000000..4feff3d1c5
--- /dev/null
+++ b/src/arm64/mediatek/mt7981b.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt7981b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x200000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		infracfg: clock-controller@10001000 {
+			compatible = "mediatek,mt7981-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clock-controller@1001b000 {
+			compatible = "mediatek,mt7981-topckgen", "syscon";
+			reg = <0 0x1001b000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clock-controller@1001e000 {
+			compatible = "mediatek,mt7981-apmixedsys";
+			reg = <0 0x1001e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwm@10048000 {
+			compatible = "mediatek,mt7981-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_PWM_STA>,
+				<&infracfg CLK_INFRA_PWM_HCK>,
+				<&infracfg CLK_INFRA_PWM1_CK>,
+				<&infracfg CLK_INFRA_PWM2_CK>,
+				<&infracfg CLK_INFRA_PWM3_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+			#pwm-cells = <2>;
+		};
+
+		clock-controller@15000000 {
+			compatible = "mediatek,mt7981-ethsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/src/arm64/mediatek/mt7986a-acelink-ew-7886cax.dts b/src/arm64/mediatek/mt7986a-acelink-ew-7886cax.dts
new file mode 100644
index 0000000000..08b3b08274
--- /dev/null
+++ b/src/arm64/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
+	model = "Acelink EW-7886CAX";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+		nvmem-cells = <&macaddr>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	mdio-bus {
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <50000>;
+		reset-post-delay-us = <20000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy6: phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <6>;
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x100000>;
+				label = "bootloader";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x80000>;
+				label = "u-boot-env";
+			};
+
+			partition@180000 {
+				compatible = "nvmem-cells";
+				reg = <0x180000 0x200000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					macaddr: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@380000 {
+				reg = <0x380000 0x200000>;
+				label = "fip";
+			};
+
+			partition@580000 {
+				reg = <0x580000 0x4000000>;
+				label = "ubi";
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
diff --git a/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
index 543c13385d..7b97c5c91b 100644
--- a/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
+++ b/src/arm64/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
@@ -15,7 +15,7 @@
 		__overlay__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			spi_nand: spi_nand@0 {
+			spi_nand: flash@0 {
 				compatible = "spi-nand";
 				reg = <0>;
 				spi-max-frequency = <10000000>;
diff --git a/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts b/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts
index d06d4af43c..ed79ad1ae8 100644
--- a/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/src/arm64/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -43,7 +43,7 @@
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
 		cooling-levels = <255 96 0>;
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
 
@@ -146,19 +146,19 @@
 
 &cpu_thermal {
 	cooling-maps {
-		cpu-active-high {
+		map-cpu-active-high {
 			/* active: set fan to cooling level 2 */
 			cooling-device = <&fan 2 2>;
 			trip = <&cpu_trip_active_high>;
 		};
 
-		cpu-active-med {
+		map-cpu-active-med {
 			/* active: set fan to cooling level 1 */
 			cooling-device = <&fan 1 1>;
 			trip = <&cpu_trip_active_med>;
 		};
 
-		cpu-active-low {
+		map-cpu-active-low {
 			/* active: set fan to cooling level 0 */
 			cooling-device = <&fan 0 0>;
 			trip = <&cpu_trip_active_low>;
diff --git a/src/arm64/mediatek/mt7986a-rfb.dts b/src/arm64/mediatek/mt7986a-rfb.dts
index 3ef371ca25..5d8e3d3f6c 100644
--- a/src/arm64/mediatek/mt7986a-rfb.dts
+++ b/src/arm64/mediatek/mt7986a-rfb.dts
@@ -65,6 +65,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -237,12 +249,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
@@ -287,6 +300,18 @@
 			label = "lan4";
 		};
 
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac1>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+
 		port@6 {
 			reg = <6>;
 			label = "cpu";
diff --git a/src/arm64/mediatek/mt7986a.dtsi b/src/arm64/mediatek/mt7986a.dtsi
index fc751e0499..559990dcd1 100644
--- a/src/arm64/mediatek/mt7986a.dtsi
+++ b/src/arm64/mediatek/mt7986a.dtsi
@@ -16,49 +16,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator-40m {
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-		#clock-cells = <0>;
-		clock-output-names = "clkxtal";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
 
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -121,38 +121,30 @@
 
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		wed_pcie: wed-pcie@10003000 {
@@ -202,6 +194,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7986-sgmiisys_0",
 				     "syscon";
@@ -234,26 +239,11 @@
 				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ring0", "ring1", "ring2", "ring3";
 			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-			clock-names = "infra_eip97_ck";
 			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
 			status = "disabled";
 		};
 
-		pwm: pwm@10048000 {
-			compatible = "mediatek,mt7986-pwm";
-			reg = <0 0x10048000 0 0x1000>;
-			#clock-cells = <1>;
-			#pwm-cells = <2>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-				 <&infracfg CLK_INFRA_PWM_STA>,
-				 <&infracfg CLK_INFRA_PWM1_CK>,
-				 <&infracfg CLK_INFRA_PWM2_CK>;
-			clock-names = "top", "main", "pwm1", "pwm2";
-			status = "disabled";
-		};
-
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -311,9 +301,9 @@
 
 		spi0: spi@1100a000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100a000 0 0x100>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +315,9 @@
 
 		spi1: spi@1100b000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100b000 0 0x100>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -337,6 +327,20 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100c800 {
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
 		auxadc: adc@1100d000 {
 			compatible = "mediatek,mt7986-auxadc";
 			reg = <0 0x1100d000 0 0x1000>;
@@ -388,39 +392,23 @@
 			status = "disabled";
 		};
 
-		thermal: thermal@1100c800 {
-			#thermal-sensor-cells = <1>;
-			compatible = "mediatek,mt7986-thermal";
-			reg = <0 0x1100c800 0 0x800>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&infracfg CLK_INFRA_THERM_CK>,
-				 <&infracfg CLK_INFRA_ADC_26M_CK>,
-				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
-			clock-names = "therm", "auxadc", "adc_32k";
-			mediatek,auxadc = <&auxadc>;
-			mediatek,apmixedsys = <&apmixedsys>;
-			nvmem-cells = <&thermal_calibration>;
-			nvmem-cell-names = "calibration-data";
-		};
-
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7986-pcie",
 				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg = <0x00 0x11280000 0x00 0x4000>;
-			reg-names = "pcie-mac";
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0x00 0x20000000 0x00
-				  0x20000000 0x00 0x10000000>;
 			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
 				 <&infracfg CLK_INFRA_IPCIE_CK>,
 				 <&infracfg CLK_INFRA_IPCIER_CK>,
 				 <&infracfg CLK_INFRA_IPCIEB_CK>;
 			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-			status = "disabled";
 
 			phys = <&pcie_port PHY_TYPE_PCIE>;
 			phy-names = "pcie-phy";
@@ -431,6 +419,8 @@
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
 			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -441,9 +431,9 @@
 		pcie_phy: t-phy {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
 			status = "disabled";
 
 			pcie_port: pcie-phy@11c00000 {
@@ -468,9 +458,9 @@
 		usb_phy: t-phy@11e10000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0 0x11e10000 0x1700>;
 			status = "disabled";
 
 			u2port0: usb-phy@0 {
@@ -498,8 +488,6 @@
 		};
 
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
@@ -533,20 +521,6 @@
 			mediatek,wo-ccif = <&wo_ccif1>;
 		};
 
-		wo_ccif0: syscon@151a5000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151a5000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		wo_ccif1: syscon@151ad000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151ad000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
 			reg = <0 0x15100000 0 0x80000>;
@@ -579,26 +553,39 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
 			mediatek,wed-pcie = <&wed_pcie>;
 			mediatek,wed = <&wed0>, <&wed1>;
-			#reset-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		wifi: wifi@18000000 {
 			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
 			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
 			reset-names = "consys";
 			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
 				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
 			clock-names = "mcu", "ap2conn";
-			reg = <0 0x18000000 0 0x1000000>,
-			      <0 0x10003000 0 0x1000>,
-			      <0 0x11d10000 0 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
@@ -646,4 +633,13 @@
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
diff --git a/src/arm64/mediatek/mt7986b-rfb.dts b/src/arm64/mediatek/mt7986b-rfb.dts
index dde190442e..58f77d9324 100644
--- a/src/arm64/mediatek/mt7986b-rfb.dts
+++ b/src/arm64/mediatek/mt7986b-rfb.dts
@@ -45,6 +45,18 @@
 		};
 	};
 
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -83,6 +95,18 @@
 					label = "lan4";
 				};
 
+				port@5 {
+					reg = <5>;
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -152,12 +176,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git a/src/arm64/mediatek/mt7988a-bananapi-bpi-r4.dts b/src/arm64/mediatek/mt7988a-bananapi-bpi-r4.dts
new file mode 100644
index 0000000000..efc4ad0b08
--- /dev/null
+++ b/src/arm64/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+
+#include "mt7988a.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
+	model = "Banana Pi BPI-R4";
+	chassis-type = "embedded";
+};
diff --git a/src/arm64/mediatek/mt7988a.dtsi b/src/arm64/mediatek/mt7988a.dtsi
new file mode 100644
index 0000000000..bba97de4fb
--- /dev/null
+++ b/src/arm64/mediatek/mt7988a.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt7988a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c080000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		clock-controller@10001000 {
+			compatible = "mediatek,mt7988-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clock-controller@1001b000 {
+			compatible = "mediatek,mt7988-topckgen", "syscon";
+			reg = <0 0x1001b000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7988-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+		};
+
+		clock-controller@1001e000 {
+			compatible = "mediatek,mt7988-apmixedsys";
+			reg = <0 0x1001e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clock-controller@11f40000 {
+			compatible = "mediatek,mt7988-xfi-pll";
+			reg = <0 0x11f40000 0 0x1000>;
+			resets = <&watchdog 16>;
+			#clock-cells = <1>;
+		};
+
+		clock-controller@15000000 {
+			compatible = "mediatek,mt7988-ethsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		clock-controller@15031000 {
+			compatible = "mediatek,mt7988-ethwarp";
+			reg = <0 0x15031000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/src/arm64/mediatek/mt8173-elm-hana-rev7.dts b/src/arm64/mediatek/mt8173-elm-hana-rev7.dts
index 256f245ac0..1c9fc791bd 100644
--- a/src/arm64/mediatek/mt8173-elm-hana-rev7.dts
+++ b/src/arm64/mediatek/mt8173-elm-hana-rev7.dts
@@ -14,7 +14,7 @@
 
 &cpu_thermal {
 	trips {
-		cpu_crit: cpu_crit0 {
+		cpu_crit: cpu-crit0 {
 			temperature = <100000>;
 			type = "critical";
 		};
diff --git a/src/arm64/mediatek/mt8173-elm.dtsi b/src/arm64/mediatek/mt8173-elm.dtsi
index 8d614ac2c5..6d962d437e 100644
--- a/src/arm64/mediatek/mt8173-elm.dtsi
+++ b/src/arm64/mediatek/mt8173-elm.dtsi
@@ -1135,7 +1135,7 @@
 			compatible = "mediatek,mt6397-rtc";
 		};
 
-		syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
+		syscfg_pctl_pmic: syscon@c000 {
 			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
 				     "syscon";
 			reg = <0 0x0000c000 0 0x0108>;
@@ -1155,6 +1155,7 @@
 		spi-max-frequency = <12000000>;
 		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel0 {
 			compatible = "google,cros-ec-i2c-tunnel";
diff --git a/src/arm64/mediatek/mt8173-evb.dts b/src/arm64/mediatek/mt8173-evb.dts
index 0e5c628d1e..3fab21f59d 100644
--- a/src/arm64/mediatek/mt8173-evb.dts
+++ b/src/arm64/mediatek/mt8173-evb.dts
@@ -41,7 +41,7 @@
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb_p1_vbus: regulator-usb-p1 {
diff --git a/src/arm64/mediatek/mt8173.dtsi b/src/arm64/mediatek/mt8173.dtsi
index cac4cd0a03..3458be7f7f 100644
--- a/src/arm64/mediatek/mt8173.dtsi
+++ b/src/arm64/mediatek/mt8173.dtsi
@@ -222,14 +222,14 @@
 		};
 	};
 
-	pmu_a53 {
+	pmu-a53 {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	pmu_a72 {
+	pmu-a72 {
 		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
@@ -286,7 +286,7 @@
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit0 {
+				cpu_crit: cpu-crit0 {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -318,7 +318,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
+		vpu_dma_reserved: vpu-dma-mem@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
 			alignment = <0x1000>;
@@ -366,7 +366,7 @@
 			#reset-cells = <1>;
 		};
 
-		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+		syscfg_pctl_a: syscon@10005000 {
 			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
 			reg = <0 0x10005000 0 0x1000>;
 		};
@@ -590,6 +590,15 @@
 			reg = <0 0x10206000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			socinfo-data1@40 {
+				reg = <0x040 0x4>;
+			};
+
+			socinfo-data2@44 {
+				reg = <0x044 0x4>;
+			};
+
 			thermal_calibration: calib@528 {
 				reg = <0x528 0xc>;
 			};
diff --git a/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
index a2e74b8293..6a7ae61651 100644
--- a/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
+++ b/src/arm64/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -82,7 +82,8 @@
 };
 
 &mmc1 {
-	bt_reset: bt-reset {
+	bluetooth@2 {
+		reg = <2>;
 		compatible = "mediatek,mt7921s-bluetooth";
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_pins_reset>;
diff --git a/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi b/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi
index b6a9830af2..bfb9e42c8a 100644
--- a/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-kakadu.dtsi
@@ -360,6 +360,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/src/arm64/mediatek/mt8183-kukui-kodama.dtsi b/src/arm64/mediatek/mt8183-kukui-kodama.dtsi
index 306c95166f..5c1bf6a1e4 100644
--- a/src/arm64/mediatek/mt8183-kukui-kodama.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-kodama.dtsi
@@ -339,6 +339,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/src/arm64/mediatek/mt8183-kukui-krane.dtsi b/src/arm64/mediatek/mt8183-kukui-krane.dtsi
index 382e4c6d71..0f5fa893a7 100644
--- a/src/arm64/mediatek/mt8183-kukui-krane.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui-krane.dtsi
@@ -343,6 +343,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/src/arm64/mediatek/mt8183-kukui.dtsi b/src/arm64/mediatek/mt8183-kukui.dtsi
index 1b3396b1ce..100191c645 100644
--- a/src/arm64/mediatek/mt8183-kukui.dtsi
+++ b/src/arm64/mediatek/mt8183-kukui.dtsi
@@ -433,7 +433,6 @@
 };
 
 &mt6358_vgpu_reg {
-	regulator-min-microvolt = <625000>;
 	regulator-max-microvolt = <900000>;
 
 	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
@@ -924,6 +923,7 @@
 		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
+		wakeup-source;
 
 		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
@@ -937,10 +937,6 @@
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
diff --git a/src/arm64/mediatek/mt8183-pumpkin.dts b/src/arm64/mediatek/mt8183-pumpkin.dts
index 76449b4cf2..333c516af4 100644
--- a/src/arm64/mediatek/mt8183-pumpkin.dts
+++ b/src/arm64/mediatek/mt8183-pumpkin.dts
@@ -33,7 +33,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region@50000000 {
+		scp_mem_reserved: scp-mem@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
diff --git a/src/arm64/mediatek/mt8183.dtsi b/src/arm64/mediatek/mt8183.dtsi
index 920ee415ef..774ae5d914 100644
--- a/src/arm64/mediatek/mt8183.dtsi
+++ b/src/arm64/mediatek/mt8183.dtsi
@@ -1585,6 +1585,15 @@
 			reg = <0 0x11f10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			socinfo-data1@4c {
+				reg = <0x04c 0x4>;
+			};
+
+			socinfo-data2@60 {
+				reg = <0x060 0x4>;
+			};
+
 			thermal_calibration: calib@180 {
 				reg = <0x180 0xc>;
 			};
@@ -1628,6 +1637,7 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		gpu: gpu@13040000 {
@@ -1955,7 +1965,7 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
 		};
 
-		venc_jpg: venc_jpg@17030000 {
+		venc_jpg: jpeg-encoder@17030000 {
 			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
 			reg = <0 0x17030000 0 0x1000>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
diff --git a/src/arm64/mediatek/mt8186-corsola-krabby.dtsi b/src/arm64/mediatek/mt8186-corsola-krabby.dtsi
new file mode 100644
index 0000000000..7c971198fa
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-krabby.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c4 = &i2c4;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&ps8640_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	edp-bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_pins>;
+		powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
+		vdd12-supply = <&mt6366_vrf12_reg>;
+		vdd33-supply = <&mt6366_vcn33_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ps8640_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-internal-delay-ns = <10000>;
+
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	proximity@28 {
+		compatible = "semtech,sx9324";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar_sensor_pins>;
+		vdd-supply = <&mt6366_vio18_reg>;
+		svdd-supply = <&mt6366_vio18_reg>;
+	};
+};
+
+&pio {
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+				 <PINMUX_GPIO135__FUNC_SCL4>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	ps8640_pins: ps8640-pins {
+		pins-pwrdn-rst {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
+				 <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+	};
+
+	sar_sensor_pins: sar-sensor-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-magneton-sku393216.dts b/src/arm64/mediatek/mt8186-corsola-magneton-sku393216.dts
new file mode 100644
index 0000000000..c9673381ad
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-magneton-sku393216.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393219", "google,steelix-sku393216",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&pp3300_s3>;
+		post-power-on-delay-ms = <350>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-magneton-sku393217.dts b/src/arm64/mediatek/mt8186-corsola-magneton-sku393217.dts
new file mode 100644
index 0000000000..28e3bbe564
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-magneton-sku393217.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393220", "google,steelix-sku393217",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	touchscreen@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		vdd-supply = <&pp3300_s3>;
+		post-power-on-delay-ms = <450>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-magneton-sku393218.dts b/src/arm64/mediatek/mt8186-corsola-magneton-sku393218.dts
new file mode 100644
index 0000000000..332894218f
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-magneton-sku393218.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Magneton board";
+	compatible = "google,steelix-sku393221", "google,steelix-sku393218",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usb_c1 {
+	status = "disabled";
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-rusty-sku196608.dts b/src/arm64/mediatek/mt8186-corsola-rusty-sku196608.dts
new file mode 100644
index 0000000000..731b0d6022
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-rusty-sku196608.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Rusty board";
+	compatible = "google,steelix-sku196609", "google,steelix-sku196608",
+		     "google,steelix", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+&gpio_keys {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-steelix-sku131072.dts b/src/arm64/mediatek/mt8186-corsola-steelix-sku131072.dts
new file mode 100644
index 0000000000..eae17bca85
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-steelix-sku131072.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131072", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <0>; /* two-wire */
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-steelix-sku131073.dts b/src/arm64/mediatek/mt8186-corsola-steelix-sku131073.dts
new file mode 100644
index 0000000000..a55375b95d
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-steelix-sku131073.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-steelix.dtsi"
+
+/ {
+	model = "Google Steelix board";
+	compatible = "google,steelix-sku131073", "google,steelix",
+		     "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&mt6366codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-steelix.dtsi b/src/arm64/mediatek/mt8186-corsola-steelix.dtsi
new file mode 100644
index 0000000000..e74e886a00
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-steelix.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+	pp1000_edpbrdg: regulator-pp1000-edpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_edpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1000_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_edpbrdg_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_edp_dx: regulator-pp3300-edp-dx {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp_dx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edpbrdg>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_z2>;
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_edpbrdg>;
+		vdd18-supply = <&pp1800_edpbrdg_dx>;
+		vdd33-supply = <&pp3300_edp_dx>;
+		analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
+		analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_disp_x>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&pp3300_s3>;
+		goodix,no-reset-during-suspend;
+	};
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <22000>;
+
+	/* second source component */
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&pio {
+	anx7625_pins: anx7625-pins {
+		pins-int {
+			pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
+			output-low;
+		};
+
+		pins-power-en {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-low;
+		};
+	};
+
+	en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+			output-low;
+		};
+	};
+
+	en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
+			output-low;
+		};
+	};
+
+	en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
+			output-low;
+		};
+	};
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-tentacool-sku327681.dts b/src/arm64/mediatek/mt8186-corsola-tentacool-sku327681.dts
new file mode 100644
index 0000000000..9bb64353ca
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-tentacool-sku327681.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+	model = "Google Tentacool board";
+	compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
+	chassis-type = "laptop";
+};
+
+/* Tentacool omits the pen. */
+&gpio_keys {
+	status = "disabled";
+};
+
+/* Tentacool omits the touchscreen; nothing else is on i2c1. */
+&i2c1 {
+	status = "disabled";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+/* Tentacool omits the touchscreen. */
+&touchscreen {
+	status = "disabled";
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-tentacool-sku327683.dts b/src/arm64/mediatek/mt8186-corsola-tentacool-sku327683.dts
new file mode 100644
index 0000000000..c3ae6f9616
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-tentacool-sku327683.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacool-sku327681.dts"
+
+/ {
+	compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262144.dts
new file mode 100644
index 0000000000..26d3451a5e
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+	model = "Google Tentacruel board";
+	compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
+		     "google,tentacruel-sku262145", "google,tentacruel-sku262144",
+		     "google,tentacruel", "mediatek,mt8186";
+	chassis-type = "convertible";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262148.dts
new file mode 100644
index 0000000000..447b57b12b
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacruel-sku262144.dts"
+
+/ {
+	compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
+		     "google,tentacruel-sku262149", "google,tentacruel-sku262148",
+		     "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+	/delete-node/ trackpad@15;
+
+	trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
diff --git a/src/arm64/mediatek/mt8186-corsola.dtsi b/src/arm64/mediatek/mt8186-corsola.dtsi
new file mode 100644
index 0000000000..1807e9d6cb
--- /dev/null
+++ b/src/arm64/mediatek/mt8186-corsola.dtsi
@@ -0,0 +1,1681 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* The size should be filled in by the bootloader. */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+		enable-gpios = <&pio 152 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	bt-sco-codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject>;
+
+		pen_insert: pen-insert-switch {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&pio 18 GPIO_ACTIVE_LOW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp1800_dpbrdg>;
+		gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+		regulator-name = "pp1800_dpbrdg_dx";
+		enable-active-high;
+		vin-supply = <&mt6366_vio18_reg>;
+	};
+
+	pp3300_disp_x: regulator-pp3300-disp-x {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_fixed_pins>;
+		gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
+		regulator-name = "pp3300_disp_x";
+		enable-active-high;
+		regulator-boot-on;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_z5: regulator-pp3300-ldo-z5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* automatically sequenced by PMIC EXT_PMIC_EN2 */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z2: regulator-pp3300-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z2";
+		/* EN pin tied to pp4200_z2, which is controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_z2: regulator-pp4200-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_z2: regulator-pp5000-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xA00000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x10a0000>;
+			no-map;
+		};
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+		pinctrl-names = "aud_clk_mosi_off",
+				"aud_clk_mosi_on",
+				"aud_clk_miso_off",
+				"aud_clk_miso_on",
+				"aud_dat_miso_off",
+				"aud_dat_miso_on",
+				"aud_dat_mosi_off",
+				"aud_dat_mosi_on",
+				"aud_gpio_i2s0_off",
+				"aud_gpio_i2s0_on",
+				"aud_gpio_i2s1_off",
+				"aud_gpio_i2s1_on",
+				"aud_gpio_i2s2_off",
+				"aud_gpio_i2s2_on",
+				"aud_gpio_i2s3_off",
+				"aud_gpio_i2s3_on",
+				"aud_gpio_pcm_off",
+				"aud_gpio_pcm_on",
+				"aud_gpio_dmic_sec";
+		pinctrl-0 = <&aud_clk_mosi_off>;
+		pinctrl-1 = <&aud_clk_mosi_on>;
+		pinctrl-2 = <&aud_clk_miso_off>;
+		pinctrl-3 = <&aud_clk_miso_on>;
+		pinctrl-4 = <&aud_dat_miso_off>;
+		pinctrl-5 = <&aud_dat_miso_on>;
+		pinctrl-6 = <&aud_dat_mosi_off>;
+		pinctrl-7 = <&aud_dat_mosi_on>;
+		pinctrl-8 = <&aud_gpio_i2s0_off>;
+		pinctrl-9 = <&aud_gpio_i2s0_on>;
+		pinctrl-10 = <&aud_gpio_i2s1_off>;
+		pinctrl-11 = <&aud_gpio_i2s1_on>;
+		pinctrl-12 = <&aud_gpio_i2s2_off>;
+		pinctrl-13 = <&aud_gpio_i2s2_on>;
+		pinctrl-14 = <&aud_gpio_i2s3_off>;
+		pinctrl-15 = <&aud_gpio_i2s3_on>;
+		pinctrl-16 = <&aud_gpio_pcm_off>;
+		pinctrl-17 = <&aud_gpio_pcm_on>;
+		pinctrl-18 = <&aud_gpio_dmic_sec>;
+		mediatek,adsp = <&adsp>;
+		mediatek,platform = <&afe>;
+
+		playback-codecs {
+			sound-dai = <&it6505dptx>, <&rt1019p>;
+		};
+
+		headset-codec {
+			sound-dai = <&rt5682s 0>;
+		};
+	};
+
+	rt1019p: speaker-codec {
+		compatible = "realtek,rt1019p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1019p_pins_default>;
+		#sound-dai-cells = <0>;
+		sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p1_vbus: regulator-usb-p1-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		vin-supply = <&pp5000_z2>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_pin>;
+		post-power-on-delay-ms = <50>;
+		reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wakeup_pin>;
+
+		wowlan-event {
+			label = "Wake on WiFi";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	status = "okay";
+};
+
+&cci {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6366_vproc12_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6366_vproc11_reg>;
+};
+
+&dpi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pins_default>;
+	pinctrl-1 = <&dpi_pins_sleep>;
+	status = "okay";
+};
+
+&dpi_out {
+	remote-endpoint = <&it6505_in>;
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6366_vgpu_reg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <8000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	/*
+	 * Trackpad pin put here to work around second source components
+	 * sharing the pinmux in steelix designs.
+	 */
+	pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	status = "okay";
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	it6505dptx: dp-bridge@5c {
+		compatible = "ite,it6505";
+		reg = <0x5c>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&it6505_pins>;
+		#sound-dai-cells = <0>;
+		ovdd-supply = <&mt6366_vsim2_reg>;
+		pwr18-supply = <&pp1800_dpbrdg_dx>;
+		reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it6505_in: endpoint {
+					link-frequencies = /bits/ 64 <150000000>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+
+	rt5682s: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
+		#sound-dai-cells = <1>;
+		AVDD-supply = <&mt6366_vio18_reg>;
+		DBVDD-supply = <&mt6366_vio18_reg>;
+		LDO1-IN-supply = <&mt6366_vio18_reg>;
+		MICVDD-supply = <&pp3300_z2>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6366_vsram_gpu_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6366_vgpu_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x11814>;
+	mediatek,hs400-ds-dly3 = <0x14>;
+	vmmc-supply = <&mt6366_vemc_reg>;
+	vqmmc-supply = <&mt6366_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs", "state_eint";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	pinctrl-2 = <&mmc1_pins_eint>;
+	/delete-property/ interrupts;
+	interrupt-names = "msdc", "sdio_wakeup";
+	interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+			      <&pio 87 IRQ_TYPE_LEVEL_LOW>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&pp3300_s3>;
+	vqmmc-supply = <&mt6366_vio18_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	bluetooth@2 {
+		compatible = "mediatek,mt7921s-bluetooth";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&nor_flash {
+	assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+	};
+};
+
+&pio {
+	/* 185 lines */
+	gpio-line-names = "TP",
+			  "TP",
+			  "TP",
+			  "I2S0_HP_DI",
+			  "I2S3_DP_SPKR_DO",
+			  "SAR_INT_ODL",
+			  "BT_WAKE_AP_ODL",
+			  "WIFI_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "EDPBRDG_INT_ODL",
+			  "EC_AP_HPD_OD",
+			  "TCHPAD_INT_ODL",
+			  "TCHSCR_INT_1V8_ODL",
+			  "EC_AP_INT_ODL",
+			  "EC_IN_RW_ODL",
+			  "GSC_AP_INT_ODL",
+			  /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
+			  "AP_FLASH_WP_L",
+			  "HP_INT_ODL",
+			  "PEN_EJECT_OD",
+			  "WCAM_PWDN_L",
+			  "WCAM_RST_L",
+			  "UCAM_SEN_EN",
+			  "UCAM_RST_L",
+			  "LTE_RESET_L",
+			  "LTE_SAR_DETECT_L",
+			  "I2S2_DP_SPK_MCK",
+			  "I2S2_DP_SPKR_BCK",
+			  "I2S2_DP_SPKR_LRCK",
+			  "I2S2_DP_SPKR_DI (TP)",
+			  "EN_PP1000_EDPBRDG",
+			  "EN_PP1800_EDPBRDG",
+			  "EN_PP3300_EDPBRDG",
+			  "UART_GSC_TX_AP_RX",
+			  "UART_AP_TX_GSC_RX",
+			  "UART_DBGCON_TX_ADSP_RX",
+			  "UART_ADSP_TX_DBGCON_RX",
+			  "EN_PP1000_DPBRDG",
+			  "TCHSCR_REPORT_DISABLE",
+			  "EN_PP3300_DPBRDG",
+			  "EN_PP1800_DPBRDG",
+			  "SPI_AP_CLK_EC",
+			  "SPI_AP_CS_EC_L",
+			  "SPI_AP_DO_EC_DI",
+			  "SPI_AP_DI_EC_DO",
+			  "SPI_AP_CLK_GSC",
+			  "SPI_AP_CS_GSC_L",
+			  "SPI_AP_DO_GSC_DI",
+			  "SPI_AP_DI_GSC_DO",
+			  "UART_DBGCON_TX_SCP_RX",
+			  "UART_SCP_TX_DBGCON_RX",
+			  "EN_PP1200_CAM_X",
+			  "EN_PP2800A_VCM_X",
+			  "EN_PP2800A_UCAM_X",
+			  "EN_PP2800A_WCAM_X",
+			  "WLAN_MODULE_RST_L",
+			  "EN_PP1200_UCAM_X",
+			  "I2S1_HP_DO",
+			  "I2S1_HP_BCK",
+			  "I2S1_HP_LRCK",
+			  "I2S1_HP_MCK",
+			  "TCHSCR_RST_1V8_L",
+			  "SPI_AP_CLK_ROM",
+			  "SPI_AP_CS_ROM_L",
+			  "SPI_AP_DO_ROM_DI",
+			  "SPI_AP_DI_ROM_DO",
+			  "NC",
+			  "NC",
+			  "EMMC_STRB",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RST_L",
+			  "EMMC_DATA0",
+			  "EMMC_DATA1",
+			  "EMMC_DATA2",
+			  "EMMC_DATA3",
+			  "EMMC_DATA4",
+			  "EMMC_DATA5",
+			  "EMMC_DATA6",
+			  "EMMC_DATA7",
+			  "AP_KPCOL0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "TP",
+			  "SDIO_CLK",
+			  "SDIO_CMD",
+			  "SDIO_DATA0",
+			  "SDIO_DATA1",
+			  "SDIO_DATA2",
+			  "SDIO_DATA3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "EDPBRDG_PWREN",
+			  "BL_PWM_1V8",
+			  "EDPBRDG_RST_L",
+			  "MIPI_DPI_CLK",
+			  "MIPI_DPI_VSYNC",
+			  "MIPI_DPI_HSYNC",
+			  "MIPI_DPI_DE",
+			  "MIPI_DPI_D0",
+			  "MIPI_DPI_D1",
+			  "MIPI_DPI_D2",
+			  "MIPI_DPI_D3",
+			  "MIPI_DPI_D4",
+			  "MIPI_DPI_D5",
+			  "MIPI_DPI_D6",
+			  "MIPI_DPI_DA7",
+			  "MIPI_DPI_D8",
+			  "MIPI_DPI_D9",
+			  "MIPI_DPI_D10",
+			  "MIPI_DPI_D11",
+			  "PCM_BT_CLK",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DI",
+			  "PCM_BT_DO",
+			  "JTAG_TMS_TP",
+			  "JTAG_TCK_TP",
+			  "JTAG_TDI_TP",
+			  "JTAG_TDO_TP",
+			  "JTAG_TRSTN_TP",
+			  "CLK_24M_WCAM",
+			  "CLK_24M_UCAM",
+			  "UCAM_DET_ODL",
+			  "AP_I2C_EDPBRDG_SCL_1V8",
+			  "AP_I2C_EDPBRDG_SDA_1V8",
+			  "AP_I2C_TCHSCR_SCL_1V8",
+			  "AP_I2C_TCHSCR_SDA_1V8",
+			  "AP_I2C_TCHPAD_SCL_1V8",
+			  "AP_I2C_TCHPAD_SDA_1V8",
+			  "AP_I2C_DPBRDG_SCL_1V8",
+			  "AP_I2C_DPBRDG_SDA_1V8",
+			  "AP_I2C_WLAN_SCL_1V8",
+			  "AP_I2C_WLAN_SDA_1V8",
+			  "AP_I2C_AUD_SCL_1V8",
+			  "AP_I2C_AUD_SDA_1V8",
+			  "AP_I2C_TPM_SCL_1V8",
+			  "AP_I2C_UCAM_SDA_1V8",
+			  "AP_I2C_UCAM_SCL_1V8",
+			  "AP_I2C_UCAM_SDA_1V8",
+			  "AP_I2C_WCAM_SCL_1V8",
+			  "AP_I2C_WCAM_SDA_1V8",
+			  "SCP_I2C_SENSOR_SCL_1V8",
+			  "SCP_I2C_SENSOR_SDA_1V8",
+			  "AP_EC_WARM_RST_REQ",
+			  "AP_XHCI_INIT_DONE",
+			  "USB3_HUB_RST_L",
+			  "EN_SPKR",
+			  "BEEP_ON",
+			  "AP_EDP_BKLTEN",
+			  "EN_PP3300_DISP_X",
+			  "EN_PP3300_SDBRDG_X",
+			  "BT_KILL_1V8_L",
+			  "WIFI_KILL_1V8_L",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_MI",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "SCP_VREQ_VAO",
+			  "AP_RTC_CLK32K",
+			  "AP_PMIC_WDTRST_L",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_CLK_MISO",
+			  "AUD_SYNC_MISO",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1",
+			  "NC",
+			  "NC",
+			  "DPBRDG_PWREN",
+			  "DPBRDG_RST_L",
+			  "LTE_W_DISABLE_L",
+			  "LTE_SAR_DETECT_L",
+			  "EN_PP3300_LTE_X",
+			  "LTE_PWR_OFF_L",
+			  "LTE_RESET_L",
+			  "TP",
+			  "TP";
+
+	aud_clk_mosi_off: aud-clk-mosi-off-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
+				 <PINMUX_GPIO167__FUNC_GPIO167>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_clk_mosi_on: aud-clk-mosi-on-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
+		};
+	};
+
+	aud_clk_miso_off: aud-clk-miso-off-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
+				 <PINMUX_GPIO171__FUNC_GPIO171>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_clk_miso_on: aud-clk-miso-on-pins {
+		pins-clk-sync {
+			pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
+				 <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
+		};
+	};
+
+	aud_dat_mosi_off: aud-dat-mosi-off-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
+				 <PINMUX_GPIO169__FUNC_GPIO169>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_dat_mosi_on: aud-dat-mosi-on-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
+		};
+	};
+
+	aud_dat_miso_off: aud-dat-miso-off-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
+				 <PINMUX_GPIO173__FUNC_GPIO173>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	aud_dat_miso_on: aud-dat-miso-on-pins {
+		pins-dat {
+			pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
+			input-schmitt-enable;
+			bias-disable;
+		};
+	};
+
+	aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+		};
+	};
+
+	aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
+		};
+	};
+
+	aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
+				 <PINMUX_GPIO57__FUNC_GPIO57>,
+				 <PINMUX_GPIO58__FUNC_GPIO58>,
+				 <PINMUX_GPIO59__FUNC_GPIO59>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
+				 <PINMUX_GPIO57__FUNC_I2S1_BCK>,
+				 <PINMUX_GPIO58__FUNC_I2S1_LRCK>,
+				 <PINMUX_GPIO59__FUNC_I2S1_MCK>;
+		};
+	};
+
+	aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO27__FUNC_GPIO27>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
+				 <PINMUX_GPIO27__FUNC_I2S2_LRCK>;
+			drive-strength = <4>;
+		};
+	};
+
+	aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			output-low;
+		};
+	};
+
+	aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
+		pins-sdata {
+			pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
+			drive-strength = <4>;
+		};
+	};
+
+	aud_gpio_pcm_off: aud-gpio-pcm-off-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO115__FUNC_GPIO115>,
+				 <PINMUX_GPIO116__FUNC_GPIO116>,
+				 <PINMUX_GPIO117__FUNC_GPIO117>,
+				 <PINMUX_GPIO118__FUNC_GPIO118>;
+			output-low;
+		};
+	};
+
+	aud_gpio_pcm_on: aud-gpio-pcm-on-pins {
+		pins-clk-sdata {
+			pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO116__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO117__FUNC_PCM_DI>,
+				 <PINMUX_GPIO118__FUNC_PCM_DO>;
+		};
+	};
+
+	aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins {
+		pins {
+			pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
+			output-low;
+		};
+	};
+
+	bt_pins_reset: bt-reset-pins {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			output-high;
+		};
+	};
+
+	dpi_pins_sleep: dpi-sleep-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
+				 <PINMUX_GPIO104__FUNC_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_GPIO105>,
+				 <PINMUX_GPIO106__FUNC_GPIO106>,
+				 <PINMUX_GPIO107__FUNC_GPIO107>,
+				 <PINMUX_GPIO108__FUNC_GPIO108>,
+				 <PINMUX_GPIO109__FUNC_GPIO109>,
+				 <PINMUX_GPIO110__FUNC_GPIO110>,
+				 <PINMUX_GPIO111__FUNC_GPIO111>,
+				 <PINMUX_GPIO112__FUNC_GPIO112>,
+				 <PINMUX_GPIO113__FUNC_GPIO113>,
+				 <PINMUX_GPIO114__FUNC_GPIO114>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>,
+				 <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO102__FUNC_GPIO102>,
+				 <PINMUX_GPIO99__FUNC_GPIO99>;
+			drive-strength = <10>;
+			output-low;
+		};
+	};
+
+	dpi_pins_default: dpi-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
+				 <PINMUX_GPIO104__FUNC_DPI_DATA1>,
+				 <PINMUX_GPIO105__FUNC_DPI_DATA2>,
+				 <PINMUX_GPIO106__FUNC_DPI_DATA3>,
+				 <PINMUX_GPIO107__FUNC_DPI_DATA4>,
+				 <PINMUX_GPIO108__FUNC_DPI_DATA5>,
+				 <PINMUX_GPIO109__FUNC_DPI_DATA6>,
+				 <PINMUX_GPIO110__FUNC_DPI_DATA7>,
+				 <PINMUX_GPIO111__FUNC_DPI_DATA8>,
+				 <PINMUX_GPIO112__FUNC_DPI_DATA9>,
+				 <PINMUX_GPIO113__FUNC_DPI_DATA10>,
+				 <PINMUX_GPIO114__FUNC_DPI_DATA11>,
+				 <PINMUX_GPIO101__FUNC_DPI_HSYNC>,
+				 <PINMUX_GPIO100__FUNC_DPI_VSYNC>,
+				 <PINMUX_GPIO102__FUNC_DPI_DE>,
+				 <PINMUX_GPIO99__FUNC_DPI_PCLK>;
+			drive-strength = <10>;
+		};
+	};
+
+	ec_ap_int: cros-ec-int-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO13__FUNC_GPIO13>;
+			input-enable;
+		};
+	};
+
+	edp_panel_fixed_pins: edp-panel-fixed-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			output-high;
+		};
+	};
+
+	en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO39__FUNC_GPIO39>;
+			output-low;
+		};
+	};
+
+	gsc_int: gsc-int-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+				 <PINMUX_GPIO127__FUNC_SCL0>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+				 <PINMUX_GPIO129__FUNC_SCL1>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+				 <PINMUX_GPIO131__FUNC_SCL2>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+				 <PINMUX_GPIO133__FUNC_SCL3>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+				 <PINMUX_GPIO137__FUNC_SCL5>;
+			bias-disable;
+			drive-strength = <4>;
+			input-enable;
+		};
+	};
+
+	it6505_pins: it6505-pins {
+		pins-hpd {
+			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-int {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO177__FUNC_GPIO177>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_eint: mmc1-eint-pins {
+		pins-dat1 {
+			pinmux = <PINMUX_GPIO87__FUNC_GPIO87>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-clk-dat {
+			pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO61__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO64__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs-dat {
+			pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO65__FUNC_SPINOR_IO2>,
+				 <PINMUX_GPIO66__FUNC_SPINOR_IO3>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pen_eject: pen-eject-pins {
+		pins {
+			pinmux = <PINMUX_GPIO18__FUNC_GPIO18>;
+			input-enable;
+			/* External pull-up. */
+			bias-disable;
+		};
+	};
+
+	pwm0_pin: disp-pwm-pins {
+		pins {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>;
+			output-high;
+		};
+	};
+
+	rt1019p_pins_default: rt1019p-default-pins {
+		pins-sdb {
+			pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
+			output-low;
+		};
+	};
+
+	scp_pins: scp-default-pins {
+		pins-scp-uart {
+			pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>,
+				 <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>,
+				 <PINMUX_GPIO41__FUNC_SPI1_CSB_A>,
+				 <PINMUX_GPIO42__FUNC_SPI1_MO_A>,
+				 <PINMUX_GPIO43__FUNC_SPI1_MI_A>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>,
+				 <PINMUX_GPIO45__FUNC_GPIO45>,
+				 <PINMUX_GPIO46__FUNC_SPI2_MO_A>,
+				 <PINMUX_GPIO47__FUNC_SPI2_MI_A>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spmi_pins: spmi-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>,
+				 <PINMUX_GPIO184__FUNC_SPMI_SDA>;
+		};
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO60__FUNC_GPIO60>;
+			output-high;
+		};
+
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+
+	trackpad_pin: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO11__FUNC_GPIO11>;
+			input-enable;
+			bias-disable; /* pulled externally */
+		};
+	};
+
+	wifi_enable_pin: wifi-enable-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+		};
+	};
+
+	wifi_wakeup_pin: wifi-wakeup-pins {
+		pins-wifi-wakeup {
+			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
+			input-enable;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&pwrap {
+	pmic {
+		compatible = "mediatek,mt6366", "mediatek,mt6358";
+		interrupt-controller;
+		interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		mt6366codec: codec {
+			compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
+			Avdd-supply = <&mt6366_vaud28_reg>;
+			mediatek,dmic-mode = <1>; /* one-wire */
+		};
+
+		mt6366_regulators: regulators {
+			compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
+			vsys-ldo1-supply = <&pp4200_z2>;
+			vsys-ldo2-supply = <&pp4200_z2>;
+			vsys-ldo3-supply = <&pp4200_z2>;
+			vsys-vcore-supply = <&pp4200_z2>;
+			vsys-vdram1-supply = <&pp4200_z2>;
+			vsys-vgpu-supply = <&pp4200_z2>;
+			vsys-vmodem-supply = <&pp4200_z2>;
+			vsys-vpa-supply = <&pp4200_z2>;
+			vsys-vproc11-supply = <&pp4200_z2>;
+			vsys-vproc12-supply = <&pp4200_z2>;
+			vsys-vs1-supply = <&pp4200_z2>;
+			vsys-vs2-supply = <&pp4200_z2>;
+			vs1-ldo1-supply = <&mt6366_vs1_reg>;
+			vs2-ldo1-supply = <&mt6366_vdram1_reg>;
+			vs2-ldo2-supply = <&mt6366_vs2_reg>;
+			vs2-ldo3-supply = <&mt6366_vs2_reg>;
+
+			vcore {
+				regulator-name = "pp0750_dvdd_core";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vdram1_reg: vdram1 {
+				regulator-name = "pp1125_emi_vdd2";
+				regulator-min-microvolt = <1125000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vgpu_reg: vgpu {
+				/*
+				 * Called "ppvar_dvdd_gpu" in the schematic.
+				 * Called "ppvar_dvdd_vgpu" here to match
+				 * regulator coupling requirements.
+				 */
+				regulator-name = "ppvar_dvdd_vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
+				regulator-coupled-max-spread = <10000>;
+			};
+
+			mt6366_vproc11_reg: vproc11 {
+				regulator-name = "ppvar_dvdd_proc_bc_mt6366";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vproc12_reg: vproc12 {
+				regulator-name = "ppvar_dvdd_proc_lc";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
+							   MT6397_BUCK_MODE_FORCE_PWM>;
+				regulator-always-on;
+			};
+
+			mt6366_vs1_reg: vs1 {
+				regulator-name = "pp2000_vs1";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6366_vs2_reg: vs2 {
+				regulator-name = "pp1350_vs2";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			va12 {
+				regulator-name = "pp1200_va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6366_vaud28_reg: vaud28 {
+				regulator-name = "pp2800_vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vaux18_reg: vaux18 {
+				regulator-name = "pp1840_vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1840000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vbif28_reg: vbif28 {
+				regulator-name = "pp2800_vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vcn18_reg: vcn18 {
+				regulator-name = "pp1800_vcn18_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vcn28_reg: vcn28 {
+				regulator-name = "pp2800_vcn28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vefuse_reg: vefuse {
+				regulator-name = "pp1800_vefuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vfe28_reg: vfe28 {
+				regulator-name = "pp2800_vfe28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vemc_reg: vemc {
+				regulator-name = "pp3000_vemc";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vibr_reg: vibr {
+				regulator-name = "pp2800_vibr_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vio18_reg: vio18 {
+				regulator-name = "pp1800_vio18_s3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6366_vio28_reg: vio28 {
+				regulator-name = "pp2800_vio28_x";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6366_vm18_reg: vm18 {
+				regulator-name = "pp1800_emi_vdd1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1840000>;
+				regulator-enable-ramp-delay = <325>;
+				regulator-always-on;
+			};
+
+			mt6366_vmc_reg: vmc {
+				regulator-name = "pp3000_vmc";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vmddr_reg: vmddr {
+				regulator-name = "pm0750_emi_vmddr";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <750000>;
+				regulator-enable-ramp-delay = <325>;
+				regulator-always-on;
+			};
+
+			mt6366_vmch_reg: vmch {
+				regulator-name = "pp3000_vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6366_vcn33_reg: vcn33 {
+				regulator-name = "pp3300_vcn33_x";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			vdram2 {
+				regulator-name = "pp0600_emi_vddq";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <600000>;
+				regulator-enable-ramp-delay = <3300>;
+				regulator-always-on;
+			};
+
+			mt6366_vrf12_reg: vrf12 {
+				regulator-name = "pp1200_vrf12_x";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6366_vrf18_reg: vrf18 {
+				regulator-name = "pp1800_vrf18_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			vsim1 {
+				regulator-name = "pp1860_vsim1_x";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1860000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6366_vsim2_reg: vsim2 {
+				regulator-name = "pp2760_vsim2_x";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2760000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6366_vsram_gpu_reg: vsram-gpu {
+				regulator-name = "pp0900_dvdd_sram_gpu";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-coupled-with = <&mt6366_vgpu_reg>;
+				regulator-coupled-max-spread = <10000>;
+			};
+
+			mt6366_vsram_others_reg: vsram-others {
+				regulator-name = "pp0900_dvdd_sram_core";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6366_vsram_proc11_reg: vsram-proc11 {
+				regulator-name = "pp0900_dvdd_sram_bc";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6366_vsram_proc12_reg: vsram-proc12 {
+				regulator-name = "pp0900_dvdd_sram_lc";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1120000>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			vusb {
+				regulator-name = "pp3070_vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3070000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			vxo22 {
+				regulator-name = "pp2240_vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2240000>;
+				regulator-enable-ramp-delay = <120>;
+				/* Feeds DCXO internally */
+				regulator-always-on;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc";
+		};
+	};
+};
+
+&scp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8186/scp.img";
+	memory-region = <&scp_mem>;
+	status = "okay";
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int>;
+		spi-max-frequency = <1000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_int>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ssusb0 {
+	status = "okay";
+};
+
+&ssusb1 {
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host0 {
+	vbus-supply = <&pp3300_s3>;
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
+
+&watchdog {
+	mediatek,reset-by-toprgu;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/src/arm64/mediatek/mt8186.dtsi b/src/arm64/mediatek/mt8186.dtsi
index 2fec6fd1c1..4763ed5dc8 100644
--- a/src/arm64/mediatek/mt8186.dtsi
+++ b/src/arm64/mediatek/mt8186.dtsi
@@ -931,11 +931,17 @@
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB {
 					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
 					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
@@ -1061,7 +1067,7 @@
 						reg = <MT8186_POWER_DOMAIN_VENC>;
 						clocks = <&topckgen CLK_TOP_VENC>,
 							 <&vencsys CLK_VENC_CKE1_VENC>;
-						clock-names = "venc0", "larb";
+						clock-names = "venc0", "subsys-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1530,8 +1536,9 @@
 			clocks = <&topckgen CLK_TOP_USB_TOP>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
-				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port0 PHY_TYPE_USB2>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
@@ -1595,8 +1602,9 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
-				 <&clk26m>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
@@ -1672,6 +1680,10 @@
 				reg = <0x59c 0x4>;
 				bits = <0 3>;
 			};
+
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
 		};
 
 		mipi_tx0: dsi-phy@11cc0000 {
@@ -1959,6 +1971,43 @@
 			power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>;
 		};
 
+		video_decoder: video-decoder@16000000 {
+			compatible = "mediatek,mt8186-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+			iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>;
+			mediatek,scp = <&scp>;
+
+			vcodec_core: video-codec@16025000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x16025000 0 0x1000>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_mm IOMMU_PORT_L4_HW_VDEC_MC_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PP_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_RD_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PRED_WR_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_PPWRAP_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_TILE_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_VLD2_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_AVC_MV_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_UFO_ENC_EXT>,
+					 <&iommu_mm IOMMU_PORT_L4_HW_VDEC_RG_CTRL_DMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC_CKEN>,
+					 <&vdecsys CLK_VDEC_LARB1_CKEN>,
+					 <&topckgen CLK_TOP_UNIVPLL_D3>;
+				clock-names = "vdec-sel", "vdec-soc-vdec", "vdec", "vdec-top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+				power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>;
+			};
+		};
+
 		larb4: smi@1602e000 {
 			compatible = "mediatek,mt8186-smi-larb";
 			reg = <0 0x1602e000 0 0x1000>;
@@ -1993,6 +2042,40 @@
 			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
 		};
 
+		venc: video-encoder@17020000 {
+			compatible = "mediatek,mt8186-vcodec-enc", "mediatek,mt8183-vcodec-enc";
+			reg = <0 0x17020000 0 0x2000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L7_VENC_RCPU>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REC>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_BSDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_SV_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_RD_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_CHROMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_CHROMA>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+			mediatek,scp = <&scp>;
+		};
+
+		jpgenc: jpeg-encoder@17030000 {
+			compatible = "mediatek,mt8186-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x17030000 0 0x10000>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vencsys CLK_VENC_CKE2_JPGENC>;
+			clock-names = "jpgenc";
+			iommus = <&iommu_mm IOMMU_PORT_L7_JPGENC_Y_RDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_C_RDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_Q_TABLE>,
+				 <&iommu_mm IOMMU_PORT_L7_JPGENC_BSDMA>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};
+
 		camsys: clock-controller@1a000000 {
 			compatible = "mediatek,mt8186-camsys";
 			reg = <0 0x1a000000 0 0x1000>;
diff --git a/src/arm64/mediatek/mt8192-asurada.dtsi b/src/arm64/mediatek/mt8192-asurada.dtsi
index d87aab8d7a..7a70424667 100644
--- a/src/arm64/mediatek/mt8192-asurada.dtsi
+++ b/src/arm64/mediatek/mt8192-asurada.dtsi
@@ -1332,14 +1332,11 @@
 		spi-max-frequency = <3000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cros_ec_int>;
+		wakeup-source;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
@@ -1424,7 +1421,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1434,7 +1431,7 @@
 			mt6315_6_vbuck3: vbuck3 {
 				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1451,7 +1448,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <606250>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
diff --git a/src/arm64/mediatek/mt8192.dtsi b/src/arm64/mediatek/mt8192.dtsi
index 6dd32dbfb8..84cbdf6e9e 100644
--- a/src/arm64/mediatek/mt8192.dtsi
+++ b/src/arm64/mediatek/mt8192.dtsi
@@ -1164,6 +1164,14 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			socinfo-data1@44 {
+				reg = <0x044 0x4>;
+			};
+
+			socinfo-data2@50 {
+				reg = <0x050 0x4>;
+			};
+
 			lvts_e_data1: data1@1c0 {
 				reg = <0x1c0 0x58>;
 			};
@@ -1456,6 +1464,7 @@
 			reg = <0 0x14001000 0 0x1000>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
 					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
@@ -1814,7 +1823,7 @@
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
diff --git a/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts b/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts
index 2d5e8f371b..a82d716f10 100644
--- a/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/src/arm64/mediatek/mt8195-cherry-tomato-r1.dts
@@ -23,3 +23,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts b/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts
index 2586c32ce6..2fe20e0dad 100644
--- a/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/src/arm64/mediatek/mt8195-cherry-tomato-r2.dts
@@ -43,3 +43,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts b/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts
index f54f9477b9..dd294ca981 100644
--- a/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/src/arm64/mediatek/mt8195-cherry-tomato-r3.dts
@@ -44,3 +44,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/src/arm64/mediatek/mt8195-cherry.dtsi b/src/arm64/mediatek/mt8195-cherry.dtsi
index 3c6079edda..4a11918da3 100644
--- a/src/arm64/mediatek/mt8195-cherry.dtsi
+++ b/src/arm64/mediatek/mt8195-cherry.dtsi
@@ -264,6 +264,38 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -1149,6 +1181,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&cros_ec_int>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		keyboard-backlight {
 			compatible = "google,cros-kbd-led-backlight";
@@ -1213,7 +1246,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1231,7 +1264,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <625000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1291,11 +1324,32 @@
 	status = "okay";
 };
 
+/*
+ * For the USB Type-C ports the role and alternate modes switching is
+ * done by the EC so we set dr_mode to host to avoid interfering.
+ */
+&ssusb0 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
 &xhci0 {
 	status = "okay";
 
 	rx-fifo-depth = <3072>;
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
 
@@ -1309,8 +1363,6 @@
 
 &xhci2 {
 	status = "okay";
-
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
 
@@ -1319,7 +1371,6 @@
 
 	/* MT7921's USB Bluetooth has issues with USB2 LPM */
 	usb2-lpm-disable;
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
 
diff --git a/src/arm64/mediatek/mt8195-demo.dts b/src/arm64/mediatek/mt8195-demo.dts
index 4127cb84eb..b82f7176b4 100644
--- a/src/arm64/mediatek/mt8195-demo.dts
+++ b/src/arm64/mediatek/mt8195-demo.dts
@@ -529,8 +529,22 @@
 	status = "okay";
 };
 
-&xhci0 {
+&ssusb0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
 	vbus-supply = <&otg_vbus_regulator>;
 	status = "okay";
 };
@@ -541,11 +555,9 @@
 };
 
 &xhci2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
 
 &xhci3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/src/arm64/mediatek/mt8195-evb.dts b/src/arm64/mediatek/mt8195-evb.dts
index 690dc7717f..341b6e0741 100644
--- a/src/arm64/mediatek/mt8195-evb.dts
+++ b/src/arm64/mediatek/mt8195-evb.dts
@@ -160,6 +160,18 @@
 	status = "okay";
 };
 
+&ssusb0 {
+	status = "okay";
+};
+
+&ssusb2 {
+	status = "okay";
+};
+
+&ssusb3 {
+	status = "okay";
+};
+
 &xhci0 {
 	status = "okay";
 };
diff --git a/src/arm64/mediatek/mt8195.dtsi b/src/arm64/mediatek/mt8195.dtsi
index b9101662ce..5d8b68f86c 100644
--- a/src/arm64/mediatek/mt8195.dtsi
+++ b/src/arm64/mediatek/mt8195.dtsi
@@ -1347,29 +1347,40 @@
 			};
 		};
 
-		xhci0: usb@11200000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x11200000 0 0x1000>,
-			      <0 0x11203e00 0 0x0100>;
+		ssusb0: usb@11201000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port0 PHY_TYPE_USB2>,
-			       <&u3port0 PHY_TYPE_USB3>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x11200000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
 				 <&topckgen CLK_TOP_SSUSB_REF>,
-				 <&apmixedsys CLK_APMIXED_USB1PLL>,
-				 <&clk26m>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
-				      "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
 			status = "disabled";
+
+			xhci0: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+						  <&topckgen CLK_TOP_SSUSB_XHCI>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+							 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+					 <&topckgen CLK_TOP_SSUSB_REF>,
+					 <&apmixedsys CLK_APMIXED_USB1PLL>,
+					 <&clk26m>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
 		};
 
 		mmc0: mmc@11230000 {
@@ -1450,52 +1461,68 @@
 			status = "disabled";
 		};
 
-		xhci2: usb@112a0000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x112a0000 0 0x1000>,
-			      <0 0x112a3e00 0 0x0100>;
+		ssusb2: usb@112a1000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port2 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112a0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
-				 <&clk26m>,
-				 <&clk26m>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
-				      "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port2 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
 			status = "disabled";
+
+			xhci2: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
-		xhci3: usb@112b0000 {
-			compatible = "mediatek,mt8195-xhci",
-				     "mediatek,mtk-xhci";
-			reg = <0 0x112b0000 0 0x1000>,
-			      <0 0x112b3e00 0 0x0100>;
+		ssusb3: usb@112b1000 {
+			compatible = "mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x112b1000 0 0x2dff>, <0 0x112b3e00 0 0x0100>;
 			reg-names = "mac", "ippc";
-			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
-			phys = <&u2port3 PHY_TYPE_USB2>;
-			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
-					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
-			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
-						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			ranges = <0 0 0 0x112b0000 0 0x3f00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
 			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
 				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
-				 <&clk26m>,
-				 <&clk26m>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
-				      "xhci_ck";
-			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			phys = <&u2port3 PHY_TYPE_USB2>;
 			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
 			status = "disabled";
+
+			xhci3: usb@0 {
+				compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci";
+				reg = <0 0 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+				assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+				clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+				clock-names = "sys_ck";
+				status = "disabled";
+			};
 		};
 
 		pcie0: pcie@112f0000 {
@@ -1701,6 +1728,9 @@
 			svs_calib_data: svs-calib@580 {
 				reg = <0x580 0x64>;
 			};
+			socinfo-data1@7a0 {
+				reg = <0x7a0 0x4>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1998,6 +2028,7 @@
 			compatible = "mediatek,mt8195-vppsys0", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>;
 		};
 
 		dma-controller@14001000 {
@@ -2221,6 +2252,7 @@
 			compatible = "mediatek,mt8195-vppsys1", "syscon";
 			reg = <0 0x14f00000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>;
 		};
 
 		mutex@14f01000 {
@@ -3050,6 +3082,7 @@
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
 		};
 
 
@@ -3231,6 +3264,7 @@
 			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
 		};
 
@@ -3301,6 +3335,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
 			clock-names = "vdo1_mutex";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
 
diff --git a/src/arm64/mediatek/mt8395-genio-1200-evk.dts b/src/arm64/mediatek/mt8395-genio-1200-evk.dts
index 7fc515a07c..1558649f63 100644
--- a/src/arm64/mediatek/mt8395-genio-1200-evk.dts
+++ b/src/arm64/mediatek/mt8395-genio-1200-evk.dts
@@ -880,6 +880,21 @@
 	status = "disabled";
 };
 
+&ssusb0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&ssusb3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
 &xhci0 {
 	status = "okay";
 };
@@ -890,11 +905,9 @@
 };
 
 &xhci2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
 
 &xhci3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	status = "okay";
 };
diff --git a/src/arm64/mediatek/mt8395-radxa-nio-12l.dts b/src/arm64/mediatek/mt8395-radxa-nio-12l.dts
new file mode 100644
index 0000000000..e5d9b671a4
--- /dev/null
+++ b/src/arm64/mediatek/mt8395-radxa-nio-12l.dts
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 Radxa Limited
+ * Copyright (C) 2024 Collabora Ltd.
+ *                    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Radxa NIO 12L";
+	chassis-type = "embedded";
+	compatible = "radxa,nio-12l", "mediatek,mt8395", "mediatek,mt8195";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+		i2c2 = &i2c4;
+		i2c3 = &i2c0;
+		i2c4 = &i2c1;
+		ethernet0 = &eth;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x1 0x0>;
+	};
+
+	wifi_vreg: regulator-wifi-3v3-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3_en";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 67 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_vreg_pins>;
+		vin-supply = <&vsys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	vsys_buck: regulator-vsys-buck {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_buck";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_vsys>;
+	};
+
+	/* Rail from power-only "TYPE C DC" port */
+	vcc5v0_vsys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			reg = <0 0x43200000 0 0xc00000>;
+			no-map;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			reg = <0 0x54600000 0x0 0x200000>;
+			no-map;
+		};
+
+		afe_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&rgmii_phy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 20000 100000>;
+	status = "okay";
+
+	mdio {
+		rgmii_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	typec-mux@48 {
+		compatible = "ite,it5205";
+		reg = <0x48>;
+
+		mode-switch;
+		orientation-switch;
+
+		vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+		port {
+			it5205_sbu_mux: endpoint {
+				remote-endpoint = <&typec_con_mux>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* I2C4 exposed at 39-pins MIPI-LCD connector */
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN1-supply = <&vsys_buck>;
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "ext_lcd_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo6"; /* Test point */
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+
+		typec {
+			compatible = "mediatek,mt6360-tcpc";
+			interrupts-extended = <&pio 100 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "PD_IRQB";
+
+			connector {
+				compatible = "usb-c-connector";
+				label = "USB-C";
+				data-role = "dual";
+				op-sink-microwatt = <10000000>;
+				power-role = "dual";
+				try-power-role = "sink";
+
+				source-pdos = <PDO_FIXED(5000, 1000,
+							 PDO_FIXED_DUAL_ROLE |
+							 PDO_FIXED_DATA_SWAP)>;
+				sink-pdos = <PDO_FIXED(5000, 3000,
+						       PDO_FIXED_DUAL_ROLE |
+						       PDO_FIXED_DATA_SWAP)>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						typec_con_hs: endpoint {
+							remote-endpoint = <&mtu3_hs0_role_sw>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						typec_con_mux: endpoint {
+							remote-endpoint = <&it5205_sbu_mux>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+/* MMC0 Controller: eMMC (HS400). Power lines are shared with UFS! */
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	hs400-ds-delay = <0x14c11>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+/* MMC1 Controller: MicroSD card slot */
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_default_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO93__FUNC_GPIO93>;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			bias-disable;
+			input-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <6>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <6>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <6>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			drive-strength = <8>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			drive-strength = <8>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>,
+				 <PINMUX_GPIO101__FUNC_GPIO101>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+
+	wifi_vreg_pins: wifi-vreg-pins {
+		pins-wifi-pmu-en {
+			pinmux = <PINMUX_GPIO65__FUNC_GPIO65>;
+			output-high;
+		};
+
+		pins-wifi-vreg-en {
+			pinmux = <PINMUX_GPIO67__FUNC_GPIO67>;
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "okay";
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&spi1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* Exposed at 40 pin connector */
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb0 {
+	role-switch-default-mode = "host";
+	usb-role-switch;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+
+	port {
+		mtu3_hs0_role_sw: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&ssusb2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci0 {
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
+
+&xhci2 {
+	vbus-supply = <&vsys>;
+	status = "okay";
+};
diff --git a/src/arm64/nvidia/tegra132-norrin.dts b/src/arm64/nvidia/tegra132-norrin.dts
index bbc2e9bef0..14d58859bb 100644
--- a/src/arm64/nvidia/tegra132-norrin.dts
+++ b/src/arm64/nvidia/tegra132-norrin.dts
@@ -762,6 +762,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
diff --git a/src/arm64/nvidia/tegra194-p2888.dtsi b/src/arm64/nvidia/tegra194-p2888.dtsi
index 5b59c1986e..e8b296d9e0 100644
--- a/src/arm64/nvidia/tegra194-p2888.dtsi
+++ b/src/arm64/nvidia/tegra194-p2888.dtsi
@@ -53,6 +53,56 @@
 			status = "okay";
 		};
 
+		i2c@c240000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "GPU";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "CPU";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "SOC";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina3221";
+				reg = <0x41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "CV";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "VDDRQ";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "SYS5V";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+		};
+
 		serial@3110000 {
 			status = "okay";
 		};
diff --git a/src/arm64/nvidia/tegra194-p2972-0000.dts b/src/arm64/nvidia/tegra194-p2972-0000.dts
index 64a3398fe7..c32876699a 100644
--- a/src/arm64/nvidia/tegra194-p2972-0000.dts
+++ b/src/arm64/nvidia/tegra194-p2972-0000.dts
@@ -2062,8 +2062,15 @@
 
 			ports {
 				usb2-0 {
-					mode = "host";
+					mode = "otg";
+					usb-role-switch;
 					status = "okay";
+
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
 				};
 
 				usb2-1 {
@@ -2094,6 +2101,14 @@
 			};
 		};
 
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
 		usb@3610000 {
 			status = "okay";
 
@@ -2106,6 +2121,40 @@
 			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
 		};
 
+		i2c@c240000 {
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio_aon>;
+				interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "dual";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+					};
+				};
+			};
+		};
+
 		i2c@c250000 {
 			status = "okay";
 
diff --git a/src/arm64/nvidia/tegra194-p3668.dtsi b/src/arm64/nvidia/tegra194-p3668.dtsi
index 58f190b0f8..59860d19f0 100644
--- a/src/arm64/nvidia/tegra194-p3668.dtsi
+++ b/src/arm64/nvidia/tegra194-p3668.dtsi
@@ -50,6 +50,33 @@
 			status = "okay";
 		};
 
+		i2c@c250000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "VDD_IN";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@1 {
+					reg = <0x1>;
+					label = "VDD_CPU_GPU_CV";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+				input@2 {
+					reg = <0x2>;
+					label = "VDD_SOC";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+		};
+
 		serial@3100000 {
 			status = "okay";
 		};
diff --git a/src/arm64/nvidia/tegra234-p3701.dtsi b/src/arm64/nvidia/tegra234-p3701.dtsi
index db6ef71167..320c8e9b06 100644
--- a/src/arm64/nvidia/tegra234-p3701.dtsi
+++ b/src/arm64/nvidia/tegra234-p3701.dtsi
@@ -3,6 +3,11 @@
 / {
 	compatible = "nvidia,p3701", "nvidia,tegra234";
 
+	aliases {
+		mmc0 = "/bus@0/mmc@3460000";
+		mmc1 = "/bus@0/mmc@3400000";
+	};
+
 	bus@0 {
 		aconnect@2900000 {
 			status = "okay";
@@ -12,1970 +17,22 @@
 
 				i2s@2901000 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s1_cif: endpoint {
-								remote-endpoint = <&xbar_i2s1>;
-							};
-						};
-
-						i2s1_port: port@1 {
-							reg = <1>;
-
-							i2s1_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
 
 				i2s@2901100 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s2_cif: endpoint {
-								remote-endpoint = <&xbar_i2s2>;
-							};
-						};
-
-						i2s2_port: port@1 {
-							reg = <1>;
-
-							i2s2_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
 
 				i2s@2901300 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s4_cif: endpoint {
-								remote-endpoint = <&xbar_i2s4>;
-							};
-						};
-
-						i2s4_port: port@1 {
-							reg = <1>;
-
-							i2s4_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
 				};
 
 				i2s@2901500 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							i2s6_cif: endpoint {
-								remote-endpoint = <&xbar_i2s6>;
-							};
-						};
-
-						i2s6_port: port@1 {
-							reg = <1>;
-
-							i2s6_dap: endpoint {
-								dai-format = "i2s";
-								/* placeholder for external codec */
-							};
-						};
-					};
-				};
-
-				sfc@2902000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc1_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc1_in>;
-							};
-						};
-
-						sfc1_out_port: port@1 {
-							reg = <1>;
-
-							sfc1_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc1_out>;
-							};
-						};
-					};
-				};
-
-				sfc@2902200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc2_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc2_in>;
-							};
-						};
-
-						sfc2_out_port: port@1 {
-							reg = <1>;
-
-							sfc2_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc2_out>;
-							};
-						};
-					};
-				};
-
-				sfc@2902400 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc3_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc3_in>;
-							};
-						};
-
-						sfc3_out_port: port@1 {
-							reg = <1>;
-
-							sfc3_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc3_out>;
-							};
-						};
-					};
-				};
-
-				sfc@2902600 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							sfc4_cif_in: endpoint {
-								remote-endpoint = <&xbar_sfc4_in>;
-							};
-						};
-
-						sfc4_out_port: port@1 {
-							reg = <1>;
-
-							sfc4_cif_out: endpoint {
-								remote-endpoint = <&xbar_sfc4_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx1_in1: endpoint {
-								remote-endpoint = <&xbar_amx1_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx1_in2: endpoint {
-								remote-endpoint = <&xbar_amx1_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx1_in3: endpoint {
-								remote-endpoint = <&xbar_amx1_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx1_in4: endpoint {
-								remote-endpoint = <&xbar_amx1_in4>;
-							};
-						};
-
-						amx1_out_port: port@4 {
-							reg = <4>;
-
-							amx1_out: endpoint {
-								remote-endpoint = <&xbar_amx1_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903100 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx2_in1: endpoint {
-								remote-endpoint = <&xbar_amx2_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx2_in2: endpoint {
-								remote-endpoint = <&xbar_amx2_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx2_in3: endpoint {
-								remote-endpoint = <&xbar_amx2_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx2_in4: endpoint {
-								remote-endpoint = <&xbar_amx2_in4>;
-							};
-						};
-
-						amx2_out_port: port@4 {
-							reg = <4>;
-
-							amx2_out: endpoint {
-								remote-endpoint = <&xbar_amx2_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx3_in1: endpoint {
-								remote-endpoint = <&xbar_amx3_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx3_in2: endpoint {
-								remote-endpoint = <&xbar_amx3_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx3_in3: endpoint {
-								remote-endpoint = <&xbar_amx3_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx3_in4: endpoint {
-								remote-endpoint = <&xbar_amx3_in4>;
-							};
-						};
-
-						amx3_out_port: port@4 {
-							reg = <4>;
-
-							amx3_out: endpoint {
-								remote-endpoint = <&xbar_amx3_out>;
-							};
-						};
-					};
-				};
-
-				amx@2903300 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							amx4_in1: endpoint {
-								remote-endpoint = <&xbar_amx4_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-
-							amx4_in2: endpoint {
-								remote-endpoint = <&xbar_amx4_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <2>;
-
-							amx4_in3: endpoint {
-								remote-endpoint = <&xbar_amx4_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <3>;
-
-							amx4_in4: endpoint {
-								remote-endpoint = <&xbar_amx4_in4>;
-							};
-						};
-
-						amx4_out_port: port@4 {
-							reg = <4>;
-
-							amx4_out: endpoint {
-								remote-endpoint = <&xbar_amx4_out>;
-							};
-						};
-					};
-				};
-
-				adx@2903800 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx1_in: endpoint {
-								remote-endpoint = <&xbar_adx1_in>;
-							};
-						};
-
-						adx1_out1_port: port@1 {
-							reg = <1>;
-
-							adx1_out1: endpoint {
-								remote-endpoint = <&xbar_adx1_out1>;
-							};
-						};
-
-						adx1_out2_port: port@2 {
-							reg = <2>;
-
-							adx1_out2: endpoint {
-								remote-endpoint = <&xbar_adx1_out2>;
-							};
-						};
-
-						adx1_out3_port: port@3 {
-							reg = <3>;
-
-							adx1_out3: endpoint {
-								remote-endpoint = <&xbar_adx1_out3>;
-							};
-						};
-
-						adx1_out4_port: port@4 {
-							reg = <4>;
-
-							adx1_out4: endpoint {
-								remote-endpoint = <&xbar_adx1_out4>;
-							};
-						};
-					};
-				};
-
-				adx@2903900 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx2_in: endpoint {
-								remote-endpoint = <&xbar_adx2_in>;
-							};
-						};
-
-						adx2_out1_port: port@1 {
-							reg = <1>;
-
-							adx2_out1: endpoint {
-								remote-endpoint = <&xbar_adx2_out1>;
-							};
-						};
-
-						adx2_out2_port: port@2 {
-							reg = <2>;
-
-							adx2_out2: endpoint {
-								remote-endpoint = <&xbar_adx2_out2>;
-							};
-						};
-
-						adx2_out3_port: port@3 {
-							reg = <3>;
-
-							adx2_out3: endpoint {
-								remote-endpoint = <&xbar_adx2_out3>;
-							};
-						};
-
-						adx2_out4_port: port@4 {
-							reg = <4>;
-
-							adx2_out4: endpoint {
-								remote-endpoint = <&xbar_adx2_out4>;
-							};
-						};
-					};
-				};
-
-				adx@2903a00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx3_in: endpoint {
-								remote-endpoint = <&xbar_adx3_in>;
-							};
-						};
-
-						adx3_out1_port: port@1 {
-							reg = <1>;
-
-							adx3_out1: endpoint {
-								remote-endpoint = <&xbar_adx3_out1>;
-							};
-						};
-
-						adx3_out2_port: port@2 {
-							reg = <2>;
-
-							adx3_out2: endpoint {
-								remote-endpoint = <&xbar_adx3_out2>;
-							};
-						};
-
-						adx3_out3_port: port@3 {
-							reg = <3>;
-
-							adx3_out3: endpoint {
-								remote-endpoint = <&xbar_adx3_out3>;
-							};
-						};
-
-						adx3_out4_port: port@4 {
-							reg = <4>;
-
-							adx3_out4: endpoint {
-								remote-endpoint = <&xbar_adx3_out4>;
-							};
-						};
-					};
-				};
-
-				adx@2903b00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							adx4_in: endpoint {
-								remote-endpoint = <&xbar_adx4_in>;
-							};
-						};
-
-						adx4_out1_port: port@1 {
-							reg = <1>;
-
-							adx4_out1: endpoint {
-								remote-endpoint = <&xbar_adx4_out1>;
-							};
-						};
-
-						adx4_out2_port: port@2 {
-							reg = <2>;
-
-							adx4_out2: endpoint {
-								remote-endpoint = <&xbar_adx4_out2>;
-							};
-						};
-
-						adx4_out3_port: port@3 {
-							reg = <3>;
-
-							adx4_out3: endpoint {
-								remote-endpoint = <&xbar_adx4_out3>;
-							};
-						};
-
-						adx4_out4_port: port@4 {
-							reg = <4>;
-
-							adx4_out4: endpoint {
-								remote-endpoint = <&xbar_adx4_out4>;
-							};
-						};
-					};
 				};
 
 				dmic@2904200 {
 					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							dmic3_cif: endpoint {
-								remote-endpoint = <&xbar_dmic3>;
-							};
-						};
-
-						dmic3_port: port@1 {
-							reg = <1>;
-
-							dmic3_dap: endpoint {
-								/* placeholder for external codec */
-							};
-						};
-					};
-				};
-
-				processing-engine@2908000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							ope1_cif_in_ep: endpoint {
-								remote-endpoint = <&xbar_ope1_in_ep>;
-							};
-						};
-
-						ope1_out_port: port@1 {
-							reg = <0x1>;
-
-							ope1_cif_out_ep: endpoint {
-								remote-endpoint = <&xbar_ope1_out_ep>;
-							};
-						};
-					};
-				};
-
-				mvc@290a000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							mvc1_cif_in: endpoint {
-								remote-endpoint = <&xbar_mvc1_in>;
-							};
-						};
-
-						mvc1_out_port: port@1 {
-							reg = <1>;
-
-							mvc1_cif_out: endpoint {
-								remote-endpoint = <&xbar_mvc1_out>;
-							};
-						};
-					};
-				};
-
-				mvc@290a200 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-
-							mvc2_cif_in: endpoint {
-								remote-endpoint = <&xbar_mvc2_in>;
-							};
-						};
-
-						mvc2_out_port: port@1 {
-							reg = <1>;
-
-							mvc2_cif_out: endpoint {
-								remote-endpoint = <&xbar_mvc2_out>;
-							};
-						};
-					};
-				};
-
-				amixer@290bb00 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							mix_in1: endpoint {
-								remote-endpoint = <&xbar_mix_in1>;
-							};
-						};
-
-						port@1 {
-							reg = <0x1>;
-
-							mix_in2: endpoint {
-								remote-endpoint = <&xbar_mix_in2>;
-							};
-						};
-
-						port@2 {
-							reg = <0x2>;
-
-							mix_in3: endpoint {
-								remote-endpoint = <&xbar_mix_in3>;
-							};
-						};
-
-						port@3 {
-							reg = <0x3>;
-
-							mix_in4: endpoint {
-								remote-endpoint = <&xbar_mix_in4>;
-							};
-						};
-
-						port@4 {
-							reg = <0x4>;
-
-							mix_in5: endpoint {
-								remote-endpoint = <&xbar_mix_in5>;
-							};
-						};
-
-						port@5 {
-							reg = <0x5>;
-
-							mix_in6: endpoint {
-								remote-endpoint = <&xbar_mix_in6>;
-							};
-						};
-
-						port@6 {
-							reg = <0x6>;
-
-							mix_in7: endpoint {
-								remote-endpoint = <&xbar_mix_in7>;
-							};
-						};
-
-						port@7 {
-							reg = <0x7>;
-
-							mix_in8: endpoint {
-								remote-endpoint = <&xbar_mix_in8>;
-							};
-						};
-
-						port@8 {
-							reg = <0x8>;
-
-							mix_in9: endpoint {
-								remote-endpoint = <&xbar_mix_in9>;
-							};
-						};
-
-						port@9 {
-							reg = <0x9>;
-
-							mix_in10: endpoint {
-								remote-endpoint = <&xbar_mix_in10>;
-							};
-						};
-
-						mix_out1_port: port@a {
-							reg = <0xa>;
-
-							mix_out1: endpoint {
-								remote-endpoint = <&xbar_mix_out1>;
-							};
-						};
-
-						mix_out2_port: port@b {
-							reg = <0xb>;
-
-							mix_out2: endpoint {
-								remote-endpoint = <&xbar_mix_out2>;
-							};
-						};
-
-						mix_out3_port: port@c {
-							reg = <0xc>;
-
-							mix_out3: endpoint {
-								remote-endpoint = <&xbar_mix_out3>;
-							};
-						};
-
-						mix_out4_port: port@d {
-							reg = <0xd>;
-
-							mix_out4: endpoint {
-								remote-endpoint = <&xbar_mix_out4>;
-							};
-						};
-
-						mix_out5_port: port@e {
-							reg = <0xe>;
-
-							mix_out5: endpoint {
-								remote-endpoint = <&xbar_mix_out5>;
-							};
-						};
-					};
-				};
-
-				admaif@290f000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						admaif0_port: port@0 {
-							reg = <0x0>;
-
-							admaif0: endpoint {
-								remote-endpoint = <&xbar_admaif0>;
-							};
-						};
-
-						admaif1_port: port@1 {
-							reg = <0x1>;
-
-							admaif1: endpoint {
-								remote-endpoint = <&xbar_admaif1>;
-							};
-						};
-
-						admaif2_port: port@2 {
-							reg = <0x2>;
-
-							admaif2: endpoint {
-								remote-endpoint = <&xbar_admaif2>;
-							};
-						};
-
-						admaif3_port: port@3 {
-							reg = <0x3>;
-
-							admaif3: endpoint {
-								remote-endpoint = <&xbar_admaif3>;
-							};
-						};
-
-						admaif4_port: port@4 {
-							reg = <0x4>;
-
-							admaif4: endpoint {
-								remote-endpoint = <&xbar_admaif4>;
-							};
-						};
-
-						admaif5_port: port@5 {
-							reg = <0x5>;
-
-							admaif5: endpoint {
-								remote-endpoint = <&xbar_admaif5>;
-							};
-						};
-
-						admaif6_port: port@6 {
-							reg = <0x6>;
-
-							admaif6: endpoint {
-								remote-endpoint = <&xbar_admaif6>;
-							};
-						};
-
-						admaif7_port: port@7 {
-							reg = <0x7>;
-
-							admaif7: endpoint {
-								remote-endpoint = <&xbar_admaif7>;
-							};
-						};
-
-						admaif8_port: port@8 {
-							reg = <0x8>;
-
-							admaif8: endpoint {
-								remote-endpoint = <&xbar_admaif8>;
-							};
-						};
-
-						admaif9_port: port@9 {
-							reg = <0x9>;
-
-							admaif9: endpoint {
-								remote-endpoint = <&xbar_admaif9>;
-							};
-						};
-
-						admaif10_port: port@a {
-							reg = <0xa>;
-
-							admaif10: endpoint {
-								remote-endpoint = <&xbar_admaif10>;
-							};
-						};
-
-						admaif11_port: port@b {
-							reg = <0xb>;
-
-							admaif11: endpoint {
-								remote-endpoint = <&xbar_admaif11>;
-							};
-						};
-
-						admaif12_port: port@c {
-							reg = <0xc>;
-
-							admaif12: endpoint {
-								remote-endpoint = <&xbar_admaif12>;
-							};
-						};
-
-						admaif13_port: port@d {
-							reg = <0xd>;
-
-							admaif13: endpoint {
-								remote-endpoint = <&xbar_admaif13>;
-							};
-						};
-
-						admaif14_port: port@e {
-							reg = <0xe>;
-
-							admaif14: endpoint {
-								remote-endpoint = <&xbar_admaif14>;
-							};
-						};
-
-						admaif15_port: port@f {
-							reg = <0xf>;
-
-							admaif15: endpoint {
-								remote-endpoint = <&xbar_admaif15>;
-							};
-						};
-
-						admaif16_port: port@10 {
-							reg = <0x10>;
-
-							admaif16: endpoint {
-								remote-endpoint = <&xbar_admaif16>;
-							};
-						};
-
-						admaif17_port: port@11 {
-							reg = <0x11>;
-
-							admaif17: endpoint {
-								remote-endpoint = <&xbar_admaif17>;
-							};
-						};
-
-						admaif18_port: port@12 {
-							reg = <0x12>;
-
-							admaif18: endpoint {
-								remote-endpoint = <&xbar_admaif18>;
-							};
-						};
-
-						admaif19_port: port@13 {
-							reg = <0x13>;
-
-							admaif19: endpoint {
-								remote-endpoint = <&xbar_admaif19>;
-							};
-						};
-					};
-				};
-
-				asrc@2910000 {
-					status = "okay";
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0x0>;
-
-							asrc_in1_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in1_ep>;
-							};
-						};
-
-						port@1 {
-							reg = <0x1>;
-
-							asrc_in2_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in2_ep>;
-							};
-						};
-
-						port@2 {
-							reg = <0x2>;
-
-							asrc_in3_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in3_ep>;
-							};
-						};
-
-						port@3 {
-							reg = <0x3>;
-
-							asrc_in4_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in4_ep>;
-							};
-						};
-
-						port@4 {
-							reg = <0x4>;
-
-							asrc_in5_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in5_ep>;
-							};
-						};
-
-						port@5 {
-							reg = <0x5>;
-
-							asrc_in6_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in6_ep>;
-							};
-						};
-
-						port@6 {
-							reg = <0x6>;
-
-							asrc_in7_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_in7_ep>;
-							};
-						};
-
-						asrc_out1_port: port@7 {
-							reg = <0x7>;
-
-							asrc_out1_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out1_ep>;
-							};
-						};
-
-						asrc_out2_port: port@8 {
-							reg = <0x8>;
-
-							asrc_out2_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out2_ep>;
-							};
-						};
-
-						asrc_out3_port: port@9 {
-							reg = <0x9>;
-
-							asrc_out3_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out3_ep>;
-							};
-						};
-
-						asrc_out4_port: port@a {
-							reg = <0xa>;
-
-							asrc_out4_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out4_ep>;
-							};
-						};
-
-						asrc_out5_port: port@b {
-							reg = <0xb>;
-
-							asrc_out5_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out5_ep>;
-							};
-						};
-
-						asrc_out6_port:	port@c {
-							reg = <0xc>;
-
-							asrc_out6_ep: endpoint {
-								remote-endpoint = <&xbar_asrc_out6_ep>;
-							};
-						};
-					};
-				};
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0x0>;
-
-						xbar_admaif0: endpoint {
-							remote-endpoint = <&admaif0>;
-						};
-					};
-
-					port@1 {
-						reg = <0x1>;
-
-						xbar_admaif1: endpoint {
-							remote-endpoint = <&admaif1>;
-						};
-					};
-
-					port@2 {
-						reg = <0x2>;
-
-						xbar_admaif2: endpoint {
-							remote-endpoint = <&admaif2>;
-						};
-					};
-
-					port@3 {
-						reg = <0x3>;
-
-						xbar_admaif3: endpoint {
-							remote-endpoint = <&admaif3>;
-						};
-					};
-
-					port@4 {
-						reg = <0x4>;
-
-						xbar_admaif4: endpoint {
-							remote-endpoint = <&admaif4>;
-						};
-					};
-
-					port@5 {
-						reg = <0x5>;
-
-						xbar_admaif5: endpoint {
-							remote-endpoint = <&admaif5>;
-						};
-					};
-
-					port@6 {
-						reg = <0x6>;
-
-						xbar_admaif6: endpoint {
-							remote-endpoint = <&admaif6>;
-						};
-					};
-
-					port@7 {
-						reg = <0x7>;
-
-						xbar_admaif7: endpoint {
-							remote-endpoint = <&admaif7>;
-						};
-					};
-
-					port@8 {
-						reg = <0x8>;
-
-						xbar_admaif8: endpoint {
-							remote-endpoint = <&admaif8>;
-						};
-					};
-
-					port@9 {
-						reg = <0x9>;
-
-						xbar_admaif9: endpoint {
-							remote-endpoint = <&admaif9>;
-						};
-					};
-
-					port@a {
-						reg = <0xa>;
-
-						xbar_admaif10: endpoint {
-							remote-endpoint = <&admaif10>;
-						};
-					};
-
-					port@b {
-						reg = <0xb>;
-
-						xbar_admaif11: endpoint {
-							remote-endpoint = <&admaif11>;
-						};
-					};
-
-					port@c {
-						reg = <0xc>;
-
-						xbar_admaif12: endpoint {
-							remote-endpoint = <&admaif12>;
-						};
-					};
-
-					port@d {
-						reg = <0xd>;
-
-						xbar_admaif13: endpoint {
-							remote-endpoint = <&admaif13>;
-						};
-					};
-
-					port@e {
-						reg = <0xe>;
-
-						xbar_admaif14: endpoint {
-							remote-endpoint = <&admaif14>;
-						};
-					};
-
-					port@f {
-						reg = <0xf>;
-
-						xbar_admaif15: endpoint {
-							remote-endpoint = <&admaif15>;
-						};
-					};
-
-					port@10 {
-						reg = <0x10>;
-
-						xbar_admaif16: endpoint {
-							remote-endpoint = <&admaif16>;
-						};
-					};
-
-					port@11 {
-						reg = <0x11>;
-
-						xbar_admaif17: endpoint {
-							remote-endpoint = <&admaif17>;
-						};
-					};
-
-					port@12 {
-						reg = <0x12>;
-
-						xbar_admaif18: endpoint {
-							remote-endpoint = <&admaif18>;
-						};
-					};
-
-					port@13 {
-						reg = <0x13>;
-
-						xbar_admaif19: endpoint {
-							remote-endpoint = <&admaif19>;
-						};
-					};
-
-					xbar_i2s1_port: port@14 {
-						reg = <0x14>;
-
-						xbar_i2s1: endpoint {
-							remote-endpoint = <&i2s1_cif>;
-						};
-					};
-
-					xbar_i2s2_port: port@15 {
-						reg = <0x15>;
-
-						xbar_i2s2: endpoint {
-							remote-endpoint = <&i2s2_cif>;
-						};
-					};
-
-					xbar_i2s4_port: port@17 {
-						reg = <0x17>;
-
-						xbar_i2s4: endpoint {
-							remote-endpoint = <&i2s4_cif>;
-						};
-					};
-
-					xbar_i2s6_port: port@19 {
-						reg = <0x19>;
-
-						xbar_i2s6: endpoint {
-							remote-endpoint = <&i2s6_cif>;
-						};
-					};
-
-					xbar_dmic3_port: port@1c {
-						reg = <0x1c>;
-
-						xbar_dmic3: endpoint {
-							remote-endpoint = <&dmic3_cif>;
-						};
-					};
-
-					xbar_sfc1_in_port: port@20 {
-						reg = <0x20>;
-
-						xbar_sfc1_in: endpoint {
-							remote-endpoint = <&sfc1_cif_in>;
-						};
-					};
-
-					port@21 {
-						reg = <0x21>;
-
-						xbar_sfc1_out: endpoint {
-							remote-endpoint = <&sfc1_cif_out>;
-						};
-					};
-
-					xbar_sfc2_in_port: port@22 {
-						reg = <0x22>;
-
-						xbar_sfc2_in: endpoint {
-							remote-endpoint = <&sfc2_cif_in>;
-						};
-					};
-
-					port@23 {
-						reg = <0x23>;
-
-						xbar_sfc2_out: endpoint {
-							remote-endpoint = <&sfc2_cif_out>;
-						};
-					};
-
-					xbar_sfc3_in_port: port@24 {
-						reg = <0x24>;
-
-						xbar_sfc3_in: endpoint {
-							remote-endpoint = <&sfc3_cif_in>;
-						};
-					};
-
-					port@25 {
-						reg = <0x25>;
-
-						xbar_sfc3_out: endpoint {
-							remote-endpoint = <&sfc3_cif_out>;
-						};
-					};
-
-					xbar_sfc4_in_port: port@26 {
-						reg = <0x26>;
-
-						xbar_sfc4_in: endpoint {
-							remote-endpoint = <&sfc4_cif_in>;
-						};
-					};
-
-					port@27 {
-						reg = <0x27>;
-
-						xbar_sfc4_out: endpoint {
-							remote-endpoint = <&sfc4_cif_out>;
-						};
-					};
-
-					xbar_mvc1_in_port: port@28 {
-						reg = <0x28>;
-
-						xbar_mvc1_in: endpoint {
-							remote-endpoint = <&mvc1_cif_in>;
-						};
-					};
-
-					port@29 {
-						reg = <0x29>;
-
-						xbar_mvc1_out: endpoint {
-							remote-endpoint = <&mvc1_cif_out>;
-						};
-					};
-
-					xbar_mvc2_in_port: port@2a {
-						reg = <0x2a>;
-
-						xbar_mvc2_in: endpoint {
-							remote-endpoint = <&mvc2_cif_in>;
-						};
-					};
-
-					port@2b {
-						reg = <0x2b>;
-
-						xbar_mvc2_out: endpoint {
-							remote-endpoint = <&mvc2_cif_out>;
-						};
-					};
-
-					xbar_amx1_in1_port: port@2c {
-						reg = <0x2c>;
-
-						xbar_amx1_in1: endpoint {
-							remote-endpoint = <&amx1_in1>;
-						};
-					};
-
-					xbar_amx1_in2_port: port@2d {
-						reg = <0x2d>;
-
-						xbar_amx1_in2: endpoint {
-							remote-endpoint = <&amx1_in2>;
-						};
-					};
-
-					xbar_amx1_in3_port: port@2e {
-						reg = <0x2e>;
-
-						xbar_amx1_in3: endpoint {
-							remote-endpoint = <&amx1_in3>;
-						};
-					};
-
-					xbar_amx1_in4_port: port@2f {
-						reg = <0x2f>;
-
-						xbar_amx1_in4: endpoint {
-							remote-endpoint = <&amx1_in4>;
-						};
-					};
-
-					port@30 {
-						reg = <0x30>;
-
-						xbar_amx1_out: endpoint {
-							remote-endpoint = <&amx1_out>;
-						};
-					};
-
-					xbar_amx2_in1_port: port@31 {
-						reg = <0x31>;
-
-						xbar_amx2_in1: endpoint {
-							remote-endpoint = <&amx2_in1>;
-						};
-					};
-
-					xbar_amx2_in2_port: port@32 {
-						reg = <0x32>;
-
-						xbar_amx2_in2: endpoint {
-							remote-endpoint = <&amx2_in2>;
-						};
-					};
-
-					xbar_amx2_in3_port: port@33 {
-						reg = <0x33>;
-
-						xbar_amx2_in3: endpoint {
-							remote-endpoint = <&amx2_in3>;
-						};
-					};
-
-					xbar_amx2_in4_port: port@34 {
-						reg = <0x34>;
-
-						xbar_amx2_in4: endpoint {
-							remote-endpoint = <&amx2_in4>;
-						};
-					};
-
-					port@35 {
-						reg = <0x35>;
-
-						xbar_amx2_out: endpoint {
-							remote-endpoint = <&amx2_out>;
-						};
-					};
-
-					xbar_amx3_in1_port: port@36 {
-						reg = <0x36>;
-
-						xbar_amx3_in1: endpoint {
-							remote-endpoint = <&amx3_in1>;
-						};
-					};
-
-					xbar_amx3_in2_port: port@37 {
-						reg = <0x37>;
-
-						xbar_amx3_in2: endpoint {
-							remote-endpoint = <&amx3_in2>;
-						};
-					};
-
-					xbar_amx3_in3_port: port@38 {
-						reg = <0x38>;
-
-						xbar_amx3_in3: endpoint {
-							remote-endpoint = <&amx3_in3>;
-						};
-					};
-
-					xbar_amx3_in4_port: port@39 {
-						reg = <0x39>;
-
-						xbar_amx3_in4: endpoint {
-							remote-endpoint = <&amx3_in4>;
-						};
-					};
-
-					port@3a {
-						reg = <0x3a>;
-
-						xbar_amx3_out: endpoint {
-							remote-endpoint = <&amx3_out>;
-						};
-					};
-
-					xbar_amx4_in1_port: port@3b {
-						reg = <0x3b>;
-
-						xbar_amx4_in1: endpoint {
-							remote-endpoint = <&amx4_in1>;
-						};
-					};
-
-					xbar_amx4_in2_port: port@3c {
-						reg = <0x3c>;
-
-						xbar_amx4_in2: endpoint {
-							remote-endpoint = <&amx4_in2>;
-						};
-					};
-
-					xbar_amx4_in3_port: port@3d {
-						reg = <0x3d>;
-
-						xbar_amx4_in3: endpoint {
-							remote-endpoint = <&amx4_in3>;
-						};
-					};
-
-					xbar_amx4_in4_port: port@3e {
-						reg = <0x3e>;
-
-						xbar_amx4_in4: endpoint {
-							remote-endpoint = <&amx4_in4>;
-						};
-					};
-
-					port@3f {
-						reg = <0x3f>;
-
-						xbar_amx4_out: endpoint {
-							remote-endpoint = <&amx4_out>;
-						};
-					};
-
-					xbar_adx1_in_port: port@40 {
-						reg = <0x40>;
-
-						xbar_adx1_in: endpoint {
-							remote-endpoint = <&adx1_in>;
-						};
-					};
-
-					port@41 {
-						reg = <0x41>;
-
-						xbar_adx1_out1: endpoint {
-							remote-endpoint = <&adx1_out1>;
-						};
-					};
-
-					port@42 {
-						reg = <0x42>;
-
-						xbar_adx1_out2: endpoint {
-							remote-endpoint = <&adx1_out2>;
-						};
-					};
-
-					port@43 {
-						reg = <0x43>;
-
-						xbar_adx1_out3: endpoint {
-							remote-endpoint = <&adx1_out3>;
-						};
-					};
-
-					port@44 {
-						reg = <0x44>;
-
-						xbar_adx1_out4: endpoint {
-							remote-endpoint = <&adx1_out4>;
-						};
-					};
-
-					xbar_adx2_in_port: port@45 {
-						reg = <0x45>;
-
-						xbar_adx2_in: endpoint {
-							remote-endpoint = <&adx2_in>;
-						};
-					};
-
-					port@46 {
-						reg = <0x46>;
-
-						xbar_adx2_out1: endpoint {
-							remote-endpoint = <&adx2_out1>;
-						};
-					};
-
-					port@47 {
-						reg = <0x47>;
-
-						xbar_adx2_out2: endpoint {
-							remote-endpoint = <&adx2_out2>;
-						};
-					};
-
-					port@48 {
-						reg = <0x48>;
-
-						xbar_adx2_out3: endpoint {
-							remote-endpoint = <&adx2_out3>;
-						};
-					};
-
-					port@49 {
-						reg = <0x49>;
-
-						xbar_adx2_out4: endpoint {
-							remote-endpoint = <&adx2_out4>;
-						};
-					};
-
-					xbar_adx3_in_port: port@4a {
-						reg = <0x4a>;
-
-						xbar_adx3_in: endpoint {
-							remote-endpoint = <&adx3_in>;
-						};
-					};
-
-					port@4b {
-						reg = <0x4b>;
-
-						xbar_adx3_out1: endpoint {
-							remote-endpoint = <&adx3_out1>;
-						};
-					};
-
-					port@4c {
-						reg = <0x4c>;
-
-						xbar_adx3_out2: endpoint {
-							remote-endpoint = <&adx3_out2>;
-						};
-					};
-
-					port@4d {
-						reg = <0x4d>;
-
-						xbar_adx3_out3: endpoint {
-							remote-endpoint = <&adx3_out3>;
-						};
-					};
-
-					port@4e {
-						reg = <0x4e>;
-
-						xbar_adx3_out4: endpoint {
-							remote-endpoint = <&adx3_out4>;
-						};
-					};
-
-					xbar_adx4_in_port: port@4f {
-						reg = <0x4f>;
-
-						xbar_adx4_in: endpoint {
-							remote-endpoint = <&adx4_in>;
-						};
-					};
-
-					port@50 {
-						reg = <0x50>;
-
-						xbar_adx4_out1: endpoint {
-							remote-endpoint = <&adx4_out1>;
-						};
-					};
-
-					port@51 {
-						reg = <0x51>;
-
-						xbar_adx4_out2: endpoint {
-							remote-endpoint = <&adx4_out2>;
-						};
-					};
-
-					port@52 {
-						reg = <0x52>;
-
-						xbar_adx4_out3: endpoint {
-							remote-endpoint = <&adx4_out3>;
-						};
-					};
-
-					port@53 {
-						reg = <0x53>;
-
-						xbar_adx4_out4: endpoint {
-							remote-endpoint = <&adx4_out4>;
-						};
-					};
-
-					xbar_mix_in1_port: port@54 {
-						reg = <0x54>;
-
-						xbar_mix_in1: endpoint {
-							remote-endpoint = <&mix_in1>;
-						};
-					};
-
-					xbar_mix_in2_port: port@55 {
-						reg = <0x55>;
-
-						xbar_mix_in2: endpoint {
-							remote-endpoint = <&mix_in2>;
-						};
-					};
-
-					xbar_mix_in3_port: port@56 {
-						reg = <0x56>;
-
-						xbar_mix_in3: endpoint {
-							remote-endpoint = <&mix_in3>;
-						};
-					};
-
-					xbar_mix_in4_port: port@57 {
-						reg = <0x57>;
-
-						xbar_mix_in4: endpoint {
-							remote-endpoint = <&mix_in4>;
-						};
-					};
-
-					xbar_mix_in5_port: port@58 {
-						reg = <0x58>;
-
-						xbar_mix_in5: endpoint {
-							remote-endpoint = <&mix_in5>;
-						};
-					};
-
-					xbar_mix_in6_port: port@59 {
-						reg = <0x59>;
-
-						xbar_mix_in6: endpoint {
-							remote-endpoint = <&mix_in6>;
-						};
-					};
-
-					xbar_mix_in7_port: port@5a {
-						reg = <0x5a>;
-
-						xbar_mix_in7: endpoint {
-							remote-endpoint = <&mix_in7>;
-						};
-					};
-
-					xbar_mix_in8_port: port@5b {
-						reg = <0x5b>;
-
-						xbar_mix_in8: endpoint {
-							remote-endpoint = <&mix_in8>;
-						};
-					};
-
-					xbar_mix_in9_port: port@5c {
-						reg = <0x5c>;
-
-						xbar_mix_in9: endpoint {
-							remote-endpoint = <&mix_in9>;
-						};
-					};
-
-					xbar_mix_in10_port: port@5d {
-						reg = <0x5d>;
-
-						xbar_mix_in10: endpoint {
-							remote-endpoint = <&mix_in10>;
-						};
-					};
-
-					port@5e {
-						reg = <0x5e>;
-
-						xbar_mix_out1: endpoint {
-							remote-endpoint = <&mix_out1>;
-						};
-					};
-
-					port@5f {
-						reg = <0x5f>;
-
-						xbar_mix_out2: endpoint {
-							remote-endpoint = <&mix_out2>;
-						};
-					};
-
-					port@60 {
-						reg = <0x60>;
-
-						xbar_mix_out3: endpoint {
-							remote-endpoint = <&mix_out3>;
-						};
-					};
-
-					port@61 {
-						reg = <0x61>;
-
-						xbar_mix_out4: endpoint {
-							remote-endpoint = <&mix_out4>;
-						};
-					};
-
-					port@62 {
-						reg = <0x62>;
-
-						xbar_mix_out5: endpoint {
-							remote-endpoint = <&mix_out5>;
-						};
-					};
-
-					xbar_asrc_in1_port: port@63 {
-						reg = <0x63>;
-
-						xbar_asrc_in1_ep: endpoint {
-							remote-endpoint = <&asrc_in1_ep>;
-						};
-					};
-
-					port@64 {
-						reg = <0x64>;
-
-						xbar_asrc_out1_ep: endpoint {
-							remote-endpoint = <&asrc_out1_ep>;
-						};
-					};
-
-					xbar_asrc_in2_port: port@65 {
-						reg = <0x65>;
-
-						xbar_asrc_in2_ep: endpoint {
-							remote-endpoint = <&asrc_in2_ep>;
-						};
-					};
-
-					port@66 {
-						reg = <0x66>;
-
-						xbar_asrc_out2_ep: endpoint {
-							remote-endpoint = <&asrc_out2_ep>;
-						};
-					};
-
-					xbar_asrc_in3_port: port@67 {
-						reg = <0x67>;
-
-						xbar_asrc_in3_ep: endpoint {
-							remote-endpoint = <&asrc_in3_ep>;
-						};
-					};
-
-					port@68 {
-						reg = <0x68>;
-
-						xbar_asrc_out3_ep: endpoint {
-							remote-endpoint = <&asrc_out3_ep>;
-						};
-					};
-
-					xbar_asrc_in4_port: port@69 {
-						reg = <0x69>;
-
-						xbar_asrc_in4_ep: endpoint {
-							remote-endpoint = <&asrc_in4_ep>;
-						};
-					};
-
-					port@6a {
-						reg = <0x6a>;
-
-						xbar_asrc_out4_ep: endpoint {
-							remote-endpoint = <&asrc_out4_ep>;
-						};
-					};
-
-					xbar_asrc_in5_port: port@6b {
-						reg = <0x6b>;
-
-						xbar_asrc_in5_ep: endpoint {
-							remote-endpoint = <&asrc_in5_ep>;
-						};
-					};
-
-					port@6c {
-						reg = <0x6c>;
-
-						xbar_asrc_out5_ep: endpoint {
-							remote-endpoint = <&asrc_out5_ep>;
-						};
-					};
-
-					xbar_asrc_in6_port: port@6d {
-						reg = <0x6d>;
-
-						xbar_asrc_in6_ep: endpoint {
-							remote-endpoint = <&asrc_in6_ep>;
-						};
-					};
-
-					port@6e {
-						reg = <0x6e>;
-
-						xbar_asrc_out6_ep: endpoint {
-							remote-endpoint = <&asrc_out6_ep>;
-						};
-					};
-
-					xbar_asrc_in7_port: port@6f {
-						reg = <0x6f>;
-
-						xbar_asrc_in7_ep: endpoint {
-							remote-endpoint = <&asrc_in7_ep>;
-						};
-					};
-
-					xbar_ope1_in_port: port@70 {
-						reg = <0x70>;
-
-						xbar_ope1_in_ep: endpoint {
-							remote-endpoint = <&ope1_cif_in_ep>;
-						};
-					};
-
-					port@71 {
-						reg = <0x71>;
-
-						xbar_ope1_out_ep: endpoint {
-							remote-endpoint = <&ope1_cif_out_ep>;
-						};
-					};
 				};
 			};
 
diff --git a/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts b/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 81a82933e3..69db584253 100644
--- a/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/src/arm64/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -12,7 +12,6 @@
 	compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234";
 
 	aliases {
-		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &tcu;
 		serial1 = &uarta;
 	};
diff --git a/src/arm64/nvidia/tegra234-p3767-0000.dtsi b/src/arm64/nvidia/tegra234-p3767-0000.dtsi
deleted file mode 100644
index baf4f69e41..0000000000
--- a/src/arm64/nvidia/tegra234-p3767-0000.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "tegra234-p3767.dtsi"
-
-/ {
-	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
-	model = "NVIDIA Jetson Orin NX";
-
-	bus@0 {
-		hda@3510000 {
-			nvidia,model = "NVIDIA Jetson Orin NX HDA";
-		};
-	};
-};
diff --git a/src/arm64/nvidia/tegra234-p3767-0005.dtsi b/src/arm64/nvidia/tegra234-p3767-0005.dtsi
deleted file mode 100644
index 232fa95ef4..0000000000
--- a/src/arm64/nvidia/tegra234-p3767-0005.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include "tegra234-p3767.dtsi"
-
-/ {
-	compatible = "nvidia,p3767-0005", "nvidia,tegra234";
-	model = "NVIDIA Jetson Orin Nano";
-
-	bus@0 {
-		hda@3510000 {
-			nvidia,model = "NVIDIA Jetson Orin Nano HDA";
-		};
-	};
-};
diff --git a/src/arm64/nvidia/tegra234-p3767.dtsi b/src/arm64/nvidia/tegra234-p3767.dtsi
index 59c14ded5e..84db7132e8 100644
--- a/src/arm64/nvidia/tegra234-p3767.dtsi
+++ b/src/arm64/nvidia/tegra234-p3767.dtsi
@@ -5,7 +5,35 @@
 / {
 	compatible = "nvidia,p3767", "nvidia,tegra234";
 
+	aliases {
+		mmc0 = "/bus@0/mmc@3400000";
+	};
+
 	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901100 {
+					status = "okay";
+				};
+
+				i2s@2901300 {
+					status = "okay";
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
 		i2c@3160000 {
 			status = "okay";
 
@@ -127,6 +155,64 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s2_port>, <&i2s4_port>;
+	};
+
 	thermal-zones {
 		tj-thermal {
 			polling-delay = <1000>;
diff --git a/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts b/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts
index 61b0e69d3d..1607ee1421 100644
--- a/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts
+++ b/src/arm64/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -4,7 +4,7 @@
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/input/gpio-keys.h>
 
-#include "tegra234-p3767-0000.dtsi"
+#include "tegra234-p3767.dtsi"
 #include "tegra234-p3768-0000.dtsi"
 
 / {
@@ -37,7 +37,6 @@
 
 		hda@3510000 {
 			nvidia,model = "NVIDIA Jetson Orin NX HDA";
-			status = "okay";
 		};
 
 		padctl@3520000 {
@@ -85,6 +84,10 @@
 		enable-active-high;
 	};
 
+	sound {
+		label = "NVIDIA Jetson Orin NX APE";
+	};
+
 	thermal-zones {
 		tj-thermal {
 			cooling-maps {
diff --git a/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts b/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts
index 9e9bb9ca8b..dc2d4bef1e 100644
--- a/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts
+++ b/src/arm64/nvidia/tegra234-p3768-0000+p3767-0005.dts
@@ -4,17 +4,27 @@
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/input/gpio-keys.h>
 
-#include "tegra234-p3767-0005.dtsi"
+#include "tegra234-p3767.dtsi"
 #include "tegra234-p3768-0000.dtsi"
 
 / {
 	compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234";
 	model = "NVIDIA Jetson Orin Nano Developer Kit";
 
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin Nano HDA";
+		};
+	};
+
 	pwm-fan {
 		cooling-levels = <0 88 187 255>;
 	};
 
+	sound {
+		label = "NVIDIA Jetson Orin Nano APE";
+	};
+
 	thermal-zones {
 		tj-thermal {
 			cooling-maps {
diff --git a/src/arm64/nvidia/tegra234-sim-vdk.dts b/src/arm64/nvidia/tegra234-sim-vdk.dts
index 9f3e9f30c3..292e28376e 100644
--- a/src/arm64/nvidia/tegra234-sim-vdk.dts
+++ b/src/arm64/nvidia/tegra234-sim-vdk.dts
@@ -8,7 +8,6 @@
 	compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
 
 	aliases {
-		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &uarta;
 	};
 
diff --git a/src/arm64/nvidia/tegra234.dtsi b/src/arm64/nvidia/tegra234.dtsi
index d1bd328892..78cbfdd98d 100644
--- a/src/arm64/nvidia/tegra234.dtsi
+++ b/src/arm64/nvidia/tegra234.dtsi
@@ -200,6 +200,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S1";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif: endpoint {
+								remote-endpoint = <&xbar_i2s1>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s2: i2s@2901100 {
@@ -214,6 +236,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S2";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif: endpoint {
+								remote-endpoint = <&xbar_i2s2>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s3: i2s@2901200 {
@@ -228,6 +272,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S3";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s3_cif: endpoint {
+								remote-endpoint = <&xbar_i2s3>;
+							};
+						};
+
+						i2s3_port: port@1 {
+							reg = <1>;
+
+							i2s3_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s4: i2s@2901300 {
@@ -242,6 +308,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S4";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif: endpoint {
+								remote-endpoint = <&xbar_i2s4>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s5: i2s@2901400 {
@@ -256,6 +344,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S5";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s5_cif: endpoint {
+								remote-endpoint = <&xbar_i2s5>;
+							};
+						};
+
+						i2s5_port: port@1 {
+							reg = <1>;
+
+							i2s5_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_i2s6: i2s@2901500 {
@@ -270,6 +380,28 @@
 					assigned-clock-rates = <1536000>;
 					sound-name-prefix = "I2S6";
 					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif: endpoint {
+								remote-endpoint = <&xbar_i2s6>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
 				};
 
 				tegra_sfc1: sfc@2902000 {
@@ -277,7 +409,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902000 0x0 0x200>;
 					sound-name-prefix = "SFC1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc1_in>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc1_out>;
+							};
+						};
+					};
 				};
 
 				tegra_sfc2: sfc@2902200 {
@@ -285,7 +437,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902200 0x0 0x200>;
 					sound-name-prefix = "SFC2";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc2_in>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc2_out>;
+							};
+						};
+					};
 				};
 
 				tegra_sfc3: sfc@2902400 {
@@ -293,7 +465,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902400 0x0 0x200>;
 					sound-name-prefix = "SFC3";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc3_in>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc3_out>;
+							};
+						};
+					};
 				};
 
 				tegra_sfc4: sfc@2902600 {
@@ -301,7 +493,27 @@
 						     "nvidia,tegra210-sfc";
 					reg = <0x0 0x2902600 0x0 0x200>;
 					sound-name-prefix = "SFC4";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc4_in>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc4_out>;
+							};
+						};
+					};
 				};
 
 				tegra_amx1: amx@2903000 {
@@ -309,249 +521,2115 @@
 						     "nvidia,tegra194-amx";
 					reg = <0x0 0x2903000 0x0 0x100>;
 					sound-name-prefix = "AMX1";
-					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1: endpoint {
+								remote-endpoint = <&xbar_amx1_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2: endpoint {
+								remote-endpoint = <&xbar_amx1_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3: endpoint {
+								remote-endpoint = <&xbar_amx1_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4: endpoint {
+								remote-endpoint = <&xbar_amx1_in4>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out: endpoint {
+								remote-endpoint = <&xbar_amx1_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx2: amx@2903100 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903100 0x0 0x100>;
+					sound-name-prefix = "AMX2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1: endpoint {
+								remote-endpoint = <&xbar_amx2_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2: endpoint {
+								remote-endpoint = <&xbar_amx2_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx2_in3: endpoint {
+								remote-endpoint = <&xbar_amx2_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx2_in4: endpoint {
+								remote-endpoint = <&xbar_amx2_in4>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out: endpoint {
+								remote-endpoint = <&xbar_amx2_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx3: amx@2903200 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903200 0x0 0x100>;
+					sound-name-prefix = "AMX3";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1: endpoint {
+								remote-endpoint = <&xbar_amx3_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2: endpoint {
+								remote-endpoint = <&xbar_amx3_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3: endpoint {
+								remote-endpoint = <&xbar_amx3_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4: endpoint {
+								remote-endpoint = <&xbar_amx3_in4>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out: endpoint {
+								remote-endpoint = <&xbar_amx3_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amx4: amx@2903300 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903300 0x0 0x100>;
+					sound-name-prefix = "AMX4";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1: endpoint {
+								remote-endpoint = <&xbar_amx4_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2: endpoint {
+								remote-endpoint = <&xbar_amx4_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3: endpoint {
+								remote-endpoint = <&xbar_amx4_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4: endpoint {
+								remote-endpoint = <&xbar_amx4_in4>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out: endpoint {
+								remote-endpoint = <&xbar_amx4_out>;
+							};
+						};
+					};
+				};
+
+				tegra_adx1: adx@2903800 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903800 0x0 0x100>;
+					sound-name-prefix = "ADX1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in: endpoint {
+								remote-endpoint = <&xbar_adx1_in>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1: endpoint {
+								remote-endpoint = <&xbar_adx1_out1>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2: endpoint {
+								remote-endpoint = <&xbar_adx1_out2>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3: endpoint {
+								remote-endpoint = <&xbar_adx1_out3>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4: endpoint {
+								remote-endpoint = <&xbar_adx1_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx2: adx@2903900 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903900 0x0 0x100>;
+					sound-name-prefix = "ADX2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in: endpoint {
+								remote-endpoint = <&xbar_adx2_in>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1: endpoint {
+								remote-endpoint = <&xbar_adx2_out1>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2: endpoint {
+								remote-endpoint = <&xbar_adx2_out2>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3: endpoint {
+								remote-endpoint = <&xbar_adx2_out3>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4: endpoint {
+								remote-endpoint = <&xbar_adx2_out4>;
+							};
+						};
+					};
+				};
+
+				tegra_adx3: adx@2903a00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903a00 0x0 0x100>;
+					sound-name-prefix = "ADX3";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in: endpoint {
+								remote-endpoint = <&xbar_adx3_in>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1: endpoint {
+								remote-endpoint = <&xbar_adx3_out1>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2: endpoint {
+								remote-endpoint = <&xbar_adx3_out2>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3: endpoint {
+								remote-endpoint = <&xbar_adx3_out3>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4: endpoint {
+								remote-endpoint = <&xbar_adx3_out4>;
+							};
+						};
+					};
 				};
 
-				tegra_amx2: amx@2903100 {
-					compatible = "nvidia,tegra234-amx",
-						     "nvidia,tegra194-amx";
-					reg = <0x0 0x2903100 0x0 0x100>;
-					sound-name-prefix = "AMX2";
-					status = "disabled";
-				};
+				tegra_adx4: adx@2903b00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903b00 0x0 0x100>;
+					sound-name-prefix = "ADX4";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in: endpoint {
+								remote-endpoint = <&xbar_adx4_in>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1: endpoint {
+								remote-endpoint = <&xbar_adx4_out1>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2: endpoint {
+								remote-endpoint = <&xbar_adx4_out2>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3: endpoint {
+								remote-endpoint = <&xbar_adx4_out3>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4: endpoint {
+								remote-endpoint = <&xbar_adx4_out4>;
+							};
+						};
+					};
+				};
+
+
+				tegra_dmic1: dmic@2904000 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic1_cif: endpoint {
+								remote-endpoint = <&xbar_dmic1>;
+							};
+						};
+
+						dmic1_port: port@1 {
+							reg = <1>;
+
+							dmic1_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dmic2: dmic@2904100 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic2_cif: endpoint {
+								remote-endpoint = <&xbar_dmic2>;
+							};
+						};
+
+						dmic2_port: port@1 {
+							reg = <1>;
+
+							dmic2_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dmic3: dmic@2904200 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904200 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC3";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif: endpoint {
+								remote-endpoint = <&xbar_dmic3>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dmic4: dmic@2904300 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904300 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC4";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic4_cif: endpoint {
+								remote-endpoint = <&xbar_dmic4>;
+							};
+						};
+
+						dmic4_port: port@1 {
+							reg = <1>;
+
+							dmic4_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dspk1: dspk@2905000 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk1_cif: endpoint {
+								remote-endpoint = <&xbar_dspk1>;
+							};
+						};
+
+						dspk1_port: port@1 {
+							reg = <1>;
+
+							dspk1_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_dspk2: dspk@2905100 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK2";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk2_cif: endpoint {
+								remote-endpoint = <&xbar_dspk2>;
+							};
+						};
+
+						dspk2_port: port@1 {
+							reg = <1>;
+
+							dspk2_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				tegra_ope1: processing-engine@2908000 {
+					compatible = "nvidia,tegra234-ope",
+						     "nvidia,tegra210-ope";
+					reg = <0x0 0x2908000 0x0 0x100>;
+					sound-name-prefix = "OPE1";
+
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					equalizer@2908100 {
+						compatible = "nvidia,tegra234-peq",
+							     "nvidia,tegra210-peq";
+						reg = <0x0 0x2908100 0x0 0x100>;
+					};
+
+					dynamic-range-compressor@2908200 {
+						compatible = "nvidia,tegra234-mbdrc",
+							     "nvidia,tegra210-mbdrc";
+						reg = <0x0 0x2908200 0x0 0x200>;
+					};
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint =
+									<&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint =
+									<&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				tegra_mvc1: mvc@290a000 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a000 0x0 0x200>;
+					sound-name-prefix = "MVC1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc1_in>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc1_out>;
+							};
+						};
+					};
+				};
+
+				tegra_mvc2: mvc@290a200 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a200 0x0 0x200>;
+					sound-name-prefix = "MVC2";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc2_in>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc2_out>;
+							};
+						};
+					};
+				};
+
+				tegra_amixer: amixer@290bb00 {
+					compatible = "nvidia,tegra234-amixer",
+						     "nvidia,tegra210-amixer";
+					reg = <0x0 0x290bb00 0x0 0x800>;
+					sound-name-prefix = "MIXER1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mix_in1: endpoint {
+								remote-endpoint = <&xbar_mix_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mix_in2: endpoint {
+								remote-endpoint = <&xbar_mix_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mix_in3: endpoint {
+								remote-endpoint = <&xbar_mix_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mix_in4: endpoint {
+								remote-endpoint = <&xbar_mix_in4>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mix_in5: endpoint {
+								remote-endpoint = <&xbar_mix_in5>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mix_in6: endpoint {
+								remote-endpoint = <&xbar_mix_in6>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mix_in7: endpoint {
+								remote-endpoint = <&xbar_mix_in7>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mix_in8: endpoint {
+								remote-endpoint = <&xbar_mix_in8>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mix_in9: endpoint {
+								remote-endpoint = <&xbar_mix_in9>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mix_in10: endpoint {
+								remote-endpoint = <&xbar_mix_in10>;
+							};
+						};
+
+						mix_out1_port: port@a {
+							reg = <0xa>;
+
+							mix_out1: endpoint {
+								remote-endpoint = <&xbar_mix_out1>;
+							};
+						};
+
+						mix_out2_port: port@b {
+							reg = <0xb>;
+
+							mix_out2: endpoint {
+								remote-endpoint = <&xbar_mix_out2>;
+							};
+						};
+
+						mix_out3_port: port@c {
+							reg = <0xc>;
+
+							mix_out3: endpoint {
+								remote-endpoint = <&xbar_mix_out3>;
+							};
+						};
+
+						mix_out4_port: port@d {
+							reg = <0xd>;
+
+							mix_out4: endpoint {
+								remote-endpoint = <&xbar_mix_out4>;
+							};
+						};
+
+						mix_out5_port: port@e {
+							reg = <0xe>;
+
+							mix_out5: endpoint {
+								remote-endpoint = <&xbar_mix_out5>;
+							};
+						};
+					};
+				};
+
+				tegra_admaif: admaif@290f000 {
+					compatible = "nvidia,tegra234-admaif",
+						     "nvidia,tegra186-admaif";
+					reg = <0x0 0x0290f000 0x0 0x1000>;
+					dmas = <&adma 1>, <&adma 1>,
+					       <&adma 2>, <&adma 2>,
+					       <&adma 3>, <&adma 3>,
+					       <&adma 4>, <&adma 4>,
+					       <&adma 5>, <&adma 5>,
+					       <&adma 6>, <&adma 6>,
+					       <&adma 7>, <&adma 7>,
+					       <&adma 8>, <&adma 8>,
+					       <&adma 9>, <&adma 9>,
+					       <&adma 10>, <&adma 10>,
+					       <&adma 11>, <&adma 11>,
+					       <&adma 12>, <&adma 12>,
+					       <&adma 13>, <&adma 13>,
+					       <&adma 14>, <&adma 14>,
+					       <&adma 15>, <&adma 15>,
+					       <&adma 16>, <&adma 16>,
+					       <&adma 17>, <&adma 17>,
+					       <&adma 18>, <&adma 18>,
+					       <&adma 19>, <&adma 19>,
+					       <&adma 20>, <&adma 20>;
+					dma-names = "rx1", "tx1",
+						    "rx2", "tx2",
+						    "rx3", "tx3",
+						    "rx4", "tx4",
+						    "rx5", "tx5",
+						    "rx6", "tx6",
+						    "rx7", "tx7",
+						    "rx8", "tx8",
+						    "rx9", "tx9",
+						    "rx10", "tx10",
+						    "rx11", "tx11",
+						    "rx12", "tx12",
+						    "rx13", "tx13",
+						    "rx14", "tx14",
+						    "rx15", "tx15",
+						    "rx16", "tx16",
+						    "rx17", "tx17",
+						    "rx18", "tx18",
+						    "rx19", "tx19",
+						    "rx20", "tx20";
+					interconnects = <&mc TEGRA234_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu_niso0 TEGRA234_SID_APE>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0: endpoint {
+								remote-endpoint = <&xbar_admaif0>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1: endpoint {
+								remote-endpoint = <&xbar_admaif1>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2: endpoint {
+								remote-endpoint = <&xbar_admaif2>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3: endpoint {
+								remote-endpoint = <&xbar_admaif3>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4: endpoint {
+								remote-endpoint = <&xbar_admaif4>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5: endpoint {
+								remote-endpoint = <&xbar_admaif5>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6: endpoint {
+								remote-endpoint = <&xbar_admaif6>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7: endpoint {
+								remote-endpoint = <&xbar_admaif7>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8: endpoint {
+								remote-endpoint = <&xbar_admaif8>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9: endpoint {
+								remote-endpoint = <&xbar_admaif9>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10: endpoint {
+								remote-endpoint = <&xbar_admaif10>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11: endpoint {
+								remote-endpoint = <&xbar_admaif11>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12: endpoint {
+								remote-endpoint = <&xbar_admaif12>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13: endpoint {
+								remote-endpoint = <&xbar_admaif13>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14: endpoint {
+								remote-endpoint = <&xbar_admaif14>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15: endpoint {
+								remote-endpoint = <&xbar_admaif15>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16: endpoint {
+								remote-endpoint = <&xbar_admaif16>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17: endpoint {
+								remote-endpoint = <&xbar_admaif17>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18: endpoint {
+								remote-endpoint = <&xbar_admaif18>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19: endpoint {
+								remote-endpoint = <&xbar_admaif19>;
+							};
+						};
+					};
+				};
+
+				tegra_asrc: asrc@2910000 {
+					compatible = "nvidia,tegra234-asrc",
+						     "nvidia,tegra186-asrc";
+					reg = <0x0 0x2910000 0x0 0x2000>;
+					sound-name-prefix = "ASRC1";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint =
+									<&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0: endpoint {
+							remote-endpoint = <&admaif0>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1: endpoint {
+							remote-endpoint = <&admaif1>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2: endpoint {
+							remote-endpoint = <&admaif2>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3: endpoint {
+							remote-endpoint = <&admaif3>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4: endpoint {
+							remote-endpoint = <&admaif4>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5: endpoint {
+							remote-endpoint = <&admaif5>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6: endpoint {
+							remote-endpoint = <&admaif6>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7: endpoint {
+							remote-endpoint = <&admaif7>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8: endpoint {
+							remote-endpoint = <&admaif8>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9: endpoint {
+							remote-endpoint = <&admaif9>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10: endpoint {
+							remote-endpoint = <&admaif10>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11: endpoint {
+							remote-endpoint = <&admaif11>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12: endpoint {
+							remote-endpoint = <&admaif12>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13: endpoint {
+							remote-endpoint = <&admaif13>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14: endpoint {
+							remote-endpoint = <&admaif14>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15: endpoint {
+							remote-endpoint = <&admaif15>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16: endpoint {
+							remote-endpoint = <&admaif16>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17: endpoint {
+							remote-endpoint = <&admaif17>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18: endpoint {
+							remote-endpoint = <&admaif18>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19: endpoint {
+							remote-endpoint = <&admaif19>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1: endpoint {
+							remote-endpoint = <&i2s1_cif>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2: endpoint {
+							remote-endpoint = <&i2s2_cif>;
+						};
+					};
+
+					xbar_i2s3_port: port@16 {
+						reg = <0x16>;
+
+						xbar_i2s3: endpoint {
+							remote-endpoint = <&i2s3_cif>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4: endpoint {
+							remote-endpoint = <&i2s4_cif>;
+						};
+					};
+
+					xbar_i2s5_port: port@18 {
+						reg = <0x18>;
+
+						xbar_i2s5: endpoint {
+							remote-endpoint = <&i2s5_cif>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6: endpoint {
+							remote-endpoint = <&i2s6_cif>;
+						};
+					};
+
+					xbar_dmic1_port: port@1a {
+						reg = <0x1a>;
+
+						xbar_dmic1: endpoint {
+							remote-endpoint = <&dmic1_cif>;
+						};
+					};
+
+					xbar_dmic2_port: port@1b {
+						reg = <0x1b>;
+
+						xbar_dmic2: endpoint {
+							remote-endpoint = <&dmic2_cif>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3: endpoint {
+							remote-endpoint = <&dmic3_cif>;
+						};
+					};
+
+					xbar_dmic4_port: port@1d {
+						reg = <0x1d>;
+
+						xbar_dmic4: endpoint {
+							remote-endpoint = <&dmic4_cif>;
+						};
+					};
+
+					xbar_dspk1_port: port@1e {
+						reg = <0x1e>;
+
+						xbar_dspk1: endpoint {
+							remote-endpoint = <&dspk1_cif>;
+						};
+					};
+
+					xbar_dspk2_port: port@1f {
+						reg = <0x1f>;
+
+						xbar_dspk2: endpoint {
+							remote-endpoint = <&dspk2_cif>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in: endpoint {
+							remote-endpoint = <&sfc1_cif_in>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out: endpoint {
+							remote-endpoint = <&sfc1_cif_out>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in: endpoint {
+							remote-endpoint = <&sfc2_cif_in>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out: endpoint {
+							remote-endpoint = <&sfc2_cif_out>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in: endpoint {
+							remote-endpoint = <&sfc3_cif_in>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out: endpoint {
+							remote-endpoint = <&sfc3_cif_out>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in: endpoint {
+							remote-endpoint = <&sfc4_cif_in>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out: endpoint {
+							remote-endpoint = <&sfc4_cif_out>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in: endpoint {
+							remote-endpoint = <&mvc1_cif_in>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out: endpoint {
+							remote-endpoint = <&mvc1_cif_out>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in: endpoint {
+							remote-endpoint = <&mvc2_cif_in>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out: endpoint {
+							remote-endpoint = <&mvc2_cif_out>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1: endpoint {
+							remote-endpoint = <&amx1_in1>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2: endpoint {
+							remote-endpoint = <&amx1_in2>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3: endpoint {
+							remote-endpoint = <&amx1_in3>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4: endpoint {
+							remote-endpoint = <&amx1_in4>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out: endpoint {
+							remote-endpoint = <&amx1_out>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1: endpoint {
+							remote-endpoint = <&amx2_in1>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2: endpoint {
+							remote-endpoint = <&amx2_in2>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3: endpoint {
+							remote-endpoint = <&amx2_in3>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4: endpoint {
+							remote-endpoint = <&amx2_in4>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out: endpoint {
+							remote-endpoint = <&amx2_out>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1: endpoint {
+							remote-endpoint = <&amx3_in1>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2: endpoint {
+							remote-endpoint = <&amx3_in2>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3: endpoint {
+							remote-endpoint = <&amx3_in3>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4: endpoint {
+							remote-endpoint = <&amx3_in4>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out: endpoint {
+							remote-endpoint = <&amx3_out>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1: endpoint {
+							remote-endpoint = <&amx4_in1>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2: endpoint {
+							remote-endpoint = <&amx4_in2>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3: endpoint {
+							remote-endpoint = <&amx4_in3>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4: endpoint {
+							remote-endpoint = <&amx4_in4>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out: endpoint {
+							remote-endpoint = <&amx4_out>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in: endpoint {
+							remote-endpoint = <&adx1_in>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1: endpoint {
+							remote-endpoint = <&adx1_out1>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2: endpoint {
+							remote-endpoint = <&adx1_out2>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3: endpoint {
+							remote-endpoint = <&adx1_out3>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4: endpoint {
+							remote-endpoint = <&adx1_out4>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in: endpoint {
+							remote-endpoint = <&adx2_in>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1: endpoint {
+							remote-endpoint = <&adx2_out1>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2: endpoint {
+							remote-endpoint = <&adx2_out2>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3: endpoint {
+							remote-endpoint = <&adx2_out3>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4: endpoint {
+							remote-endpoint = <&adx2_out4>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in: endpoint {
+							remote-endpoint = <&adx3_in>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1: endpoint {
+							remote-endpoint = <&adx3_out1>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2: endpoint {
+							remote-endpoint = <&adx3_out2>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3: endpoint {
+							remote-endpoint = <&adx3_out3>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4: endpoint {
+							remote-endpoint = <&adx3_out4>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in: endpoint {
+							remote-endpoint = <&adx4_in>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1: endpoint {
+							remote-endpoint = <&adx4_out1>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2: endpoint {
+							remote-endpoint = <&adx4_out2>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3: endpoint {
+							remote-endpoint = <&adx4_out3>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4: endpoint {
+							remote-endpoint = <&adx4_out4>;
+						};
+					};
+
+					xbar_mix_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mix_in1: endpoint {
+							remote-endpoint = <&mix_in1>;
+						};
+					};
+
+					xbar_mix_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mix_in2: endpoint {
+							remote-endpoint = <&mix_in2>;
+						};
+					};
+
+					xbar_mix_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mix_in3: endpoint {
+							remote-endpoint = <&mix_in3>;
+						};
+					};
+
+					xbar_mix_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mix_in4: endpoint {
+							remote-endpoint = <&mix_in4>;
+						};
+					};
+
+					xbar_mix_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mix_in5: endpoint {
+							remote-endpoint = <&mix_in5>;
+						};
+					};
+
+					xbar_mix_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mix_in6: endpoint {
+							remote-endpoint = <&mix_in6>;
+						};
+					};
+
+					xbar_mix_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mix_in7: endpoint {
+							remote-endpoint = <&mix_in7>;
+						};
+					};
+
+					xbar_mix_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mix_in8: endpoint {
+							remote-endpoint = <&mix_in8>;
+						};
+					};
+
+					xbar_mix_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mix_in9: endpoint {
+							remote-endpoint = <&mix_in9>;
+						};
+					};
+
+					xbar_mix_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mix_in10: endpoint {
+							remote-endpoint = <&mix_in10>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mix_out1: endpoint {
+							remote-endpoint = <&mix_out1>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mix_out2: endpoint {
+							remote-endpoint = <&mix_out2>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mix_out3: endpoint {
+							remote-endpoint = <&mix_out3>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mix_out4: endpoint {
+							remote-endpoint = <&mix_out4>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mix_out5: endpoint {
+							remote-endpoint = <&mix_out5>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
 
-				tegra_amx3: amx@2903200 {
-					compatible = "nvidia,tegra234-amx",
-						     "nvidia,tegra194-amx";
-					reg = <0x0 0x2903200 0x0 0x100>;
-					sound-name-prefix = "AMX3";
-					status = "disabled";
-				};
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
 
-				tegra_amx4: amx@2903300 {
-					compatible = "nvidia,tegra234-amx",
-						     "nvidia,tegra194-amx";
-					reg = <0x0 0x2903300 0x0 0x100>;
-					sound-name-prefix = "AMX4";
-					status = "disabled";
-				};
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
 
-				tegra_adx1: adx@2903800 {
-					compatible = "nvidia,tegra234-adx",
-						     "nvidia,tegra210-adx";
-					reg = <0x0 0x2903800 0x0 0x100>;
-					sound-name-prefix = "ADX1";
-					status = "disabled";
-				};
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
 
-				tegra_adx2: adx@2903900 {
-					compatible = "nvidia,tegra234-adx",
-						     "nvidia,tegra210-adx";
-					reg = <0x0 0x2903900 0x0 0x100>;
-					sound-name-prefix = "ADX2";
-					status = "disabled";
-				};
+					port@66 {
+						reg = <0x66>;
 
-				tegra_adx3: adx@2903a00 {
-					compatible = "nvidia,tegra234-adx",
-						     "nvidia,tegra210-adx";
-					reg = <0x0 0x2903a00 0x0 0x100>;
-					sound-name-prefix = "ADX3";
-					status = "disabled";
-				};
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
 
-				tegra_adx4: adx@2903b00 {
-					compatible = "nvidia,tegra234-adx",
-						     "nvidia,tegra210-adx";
-					reg = <0x0 0x2903b00 0x0 0x100>;
-					sound-name-prefix = "ADX4";
-					status = "disabled";
-				};
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
 
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
 
-				tegra_dmic1: dmic@2904000 {
-					compatible = "nvidia,tegra234-dmic",
-						     "nvidia,tegra210-dmic";
-					reg = <0x0 0x2904000 0x0 0x100>;
-					clocks = <&bpmp TEGRA234_CLK_DMIC1>;
-					clock-names = "dmic";
-					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>;
-					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
-					assigned-clock-rates = <3072000>;
-					sound-name-prefix = "DMIC1";
-					status = "disabled";
-				};
+					port@68 {
+						reg = <0x68>;
 
-				tegra_dmic2: dmic@2904100 {
-					compatible = "nvidia,tegra234-dmic",
-						     "nvidia,tegra210-dmic";
-					reg = <0x0 0x2904100 0x0 0x100>;
-					clocks = <&bpmp TEGRA234_CLK_DMIC2>;
-					clock-names = "dmic";
-					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>;
-					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
-					assigned-clock-rates = <3072000>;
-					sound-name-prefix = "DMIC2";
-					status = "disabled";
-				};
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
 
-				tegra_dmic3: dmic@2904200 {
-					compatible = "nvidia,tegra234-dmic",
-						     "nvidia,tegra210-dmic";
-					reg = <0x0 0x2904200 0x0 0x100>;
-					clocks = <&bpmp TEGRA234_CLK_DMIC3>;
-					clock-names = "dmic";
-					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>;
-					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
-					assigned-clock-rates = <3072000>;
-					sound-name-prefix = "DMIC3";
-					status = "disabled";
-				};
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
 
-				tegra_dmic4: dmic@2904300 {
-					compatible = "nvidia,tegra234-dmic",
-						     "nvidia,tegra210-dmic";
-					reg = <0x0 0x2904300 0x0 0x100>;
-					clocks = <&bpmp TEGRA234_CLK_DMIC4>;
-					clock-names = "dmic";
-					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>;
-					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
-					assigned-clock-rates = <3072000>;
-					sound-name-prefix = "DMIC4";
-					status = "disabled";
-				};
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
 
-				tegra_dspk1: dspk@2905000 {
-					compatible = "nvidia,tegra234-dspk",
-						     "nvidia,tegra186-dspk";
-					reg = <0x0 0x2905000 0x0 0x100>;
-					clocks = <&bpmp TEGRA234_CLK_DSPK1>;
-					clock-names = "dspk";
-					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>;
-					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
-					assigned-clock-rates = <12288000>;
-					sound-name-prefix = "DSPK1";
-					status = "disabled";
-				};
+					port@6a {
+						reg = <0x6a>;
 
-				tegra_dspk2: dspk@2905100 {
-					compatible = "nvidia,tegra234-dspk",
-						     "nvidia,tegra186-dspk";
-					reg = <0x0 0x2905100 0x0 0x100>;
-					clocks = <&bpmp TEGRA234_CLK_DSPK2>;
-					clock-names = "dspk";
-					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>;
-					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
-					assigned-clock-rates = <12288000>;
-					sound-name-prefix = "DSPK2";
-					status = "disabled";
-				};
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
 
-				tegra_ope1: processing-engine@2908000 {
-					compatible = "nvidia,tegra234-ope",
-						     "nvidia,tegra210-ope";
-					reg = <0x0 0x2908000 0x0 0x100>;
-					sound-name-prefix = "OPE1";
-					status = "disabled";
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
 
-					#address-cells = <2>;
-					#size-cells = <2>;
-					ranges;
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
 
-					equalizer@2908100 {
-						compatible = "nvidia,tegra234-peq",
-							     "nvidia,tegra210-peq";
-						reg = <0x0 0x2908100 0x0 0x100>;
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
 					};
 
-					dynamic-range-compressor@2908200 {
-						compatible = "nvidia,tegra234-mbdrc",
-							     "nvidia,tegra210-mbdrc";
-						reg = <0x0 0x2908200 0x0 0x200>;
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
 					};
-				};
 
-				tegra_mvc1: mvc@290a000 {
-					compatible = "nvidia,tegra234-mvc",
-						     "nvidia,tegra210-mvc";
-					reg = <0x0 0x290a000 0x0 0x200>;
-					sound-name-prefix = "MVC1";
-					status = "disabled";
-				};
+					port@6e {
+						reg = <0x6e>;
 
-				tegra_mvc2: mvc@290a200 {
-					compatible = "nvidia,tegra234-mvc",
-						     "nvidia,tegra210-mvc";
-					reg = <0x0 0x290a200 0x0 0x200>;
-					sound-name-prefix = "MVC2";
-					status = "disabled";
-				};
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
 
-				tegra_amixer: amixer@290bb00 {
-					compatible = "nvidia,tegra234-amixer",
-						     "nvidia,tegra210-amixer";
-					reg = <0x0 0x290bb00 0x0 0x800>;
-					sound-name-prefix = "MIXER1";
-					status = "disabled";
-				};
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
 
-				tegra_admaif: admaif@290f000 {
-					compatible = "nvidia,tegra234-admaif",
-						     "nvidia,tegra186-admaif";
-					reg = <0x0 0x0290f000 0x0 0x1000>;
-					dmas = <&adma 1>, <&adma 1>,
-					       <&adma 2>, <&adma 2>,
-					       <&adma 3>, <&adma 3>,
-					       <&adma 4>, <&adma 4>,
-					       <&adma 5>, <&adma 5>,
-					       <&adma 6>, <&adma 6>,
-					       <&adma 7>, <&adma 7>,
-					       <&adma 8>, <&adma 8>,
-					       <&adma 9>, <&adma 9>,
-					       <&adma 10>, <&adma 10>,
-					       <&adma 11>, <&adma 11>,
-					       <&adma 12>, <&adma 12>,
-					       <&adma 13>, <&adma 13>,
-					       <&adma 14>, <&adma 14>,
-					       <&adma 15>, <&adma 15>,
-					       <&adma 16>, <&adma 16>,
-					       <&adma 17>, <&adma 17>,
-					       <&adma 18>, <&adma 18>,
-					       <&adma 19>, <&adma 19>,
-					       <&adma 20>, <&adma 20>;
-					dma-names = "rx1", "tx1",
-						    "rx2", "tx2",
-						    "rx3", "tx3",
-						    "rx4", "tx4",
-						    "rx5", "tx5",
-						    "rx6", "tx6",
-						    "rx7", "tx7",
-						    "rx8", "tx8",
-						    "rx9", "tx9",
-						    "rx10", "tx10",
-						    "rx11", "tx11",
-						    "rx12", "tx12",
-						    "rx13", "tx13",
-						    "rx14", "tx14",
-						    "rx15", "tx15",
-						    "rx16", "tx16",
-						    "rx17", "tx17",
-						    "rx18", "tx18",
-						    "rx19", "tx19",
-						    "rx20", "tx20";
-					interconnects = <&mc TEGRA234_MEMORY_CLIENT_APEDMAR &emc>,
-							<&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>;
-					interconnect-names = "dma-mem", "write";
-					iommus = <&smmu_niso0 TEGRA234_SID_APE>;
-					status = "disabled";
-				};
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
 
-				tegra_asrc: asrc@2910000 {
-					compatible = "nvidia,tegra234-asrc",
-						     "nvidia,tegra186-asrc";
-					reg = <0x0 0x2910000 0x0 0x2000>;
-					sound-name-prefix = "ASRC1";
-					status = "disabled";
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
 				};
 			};
 
@@ -1461,6 +3539,14 @@
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
 			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
 			status = "disabled";
+
+			snps,axi-config = <&mgbe0_axi_setup>;
+
+			mgbe0_axi_setup: stmmac-axi-config {
+				snps,blen = <256 128 64 32>;
+				snps,rd_osr_lmt = <63>;
+				snps,wr_osr_lmt = <63>;
+			};
 		};
 
 		ethernet@6900000 {
@@ -1495,6 +3581,14 @@
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
 			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
 			status = "disabled";
+
+			snps,axi-config = <&mgbe1_axi_setup>;
+
+			mgbe1_axi_setup: stmmac-axi-config {
+				snps,blen = <256 128 64 32>;
+				snps,rd_osr_lmt = <63>;
+				snps,wr_osr_lmt = <63>;
+			};
 		};
 
 		ethernet@6a00000 {
@@ -1529,6 +3623,14 @@
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
 			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
 			status = "disabled";
+
+			snps,axi-config = <&mgbe2_axi_setup>;
+
+			mgbe2_axi_setup: stmmac-axi-config {
+				snps,blen = <256 128 64 32>;
+				snps,rd_osr_lmt = <63>;
+				snps,wr_osr_lmt = <63>;
+			};
 		};
 
 		ethernet@6b00000 {
diff --git a/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts
index c08b4be5cc..f9cbf8c1d6 100644
--- a/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts
+++ b/src/arm64/qcom/apq8016-sbc-d3-camera-mezzanine.dts
@@ -9,7 +9,7 @@
 #include "apq8016-sbc.dts"
 
 / {
-	camera_vdddo_1v8: camera-vdddo-1v8 {
+	camera_vdddo_1v8: regulator-camera-vdddo {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdddo";
 		regulator-min-microvolt = <1800000>;
@@ -17,7 +17,7 @@
 		regulator-always-on;
 	};
 
-	camera_vdda_2v8: camera-vdda-2v8 {
+	camera_vdda_2v8: regulator-camera-vdda {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdda";
 		regulator-min-microvolt = <2800000>;
@@ -25,7 +25,7 @@
 		regulator-always-on;
 	};
 
-	camera_vddd_1v5: camera-vddd-1v5 {
+	camera_vddd_1v5: regulator-camera-vddd {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vddd";
 		regulator-min-microvolt = <1500000>;
@@ -53,7 +53,7 @@
 };
 
 &cci_i2c0 {
-	camera_rear@3b {
+	camera@3b {
 		compatible = "ovti,ov5640";
 		reg = <0x3b>;
 
diff --git a/src/arm64/qcom/ipq5332.dtsi b/src/arm64/qcom/ipq5332.dtsi
index 42e2e48b2b..770d9c2fb4 100644
--- a/src/arm64/qcom/ipq5332.dtsi
+++ b/src/arm64/qcom/ipq5332.dtsi
@@ -320,8 +320,12 @@
 			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
 			reg = <0x08af8800 0x400>;
 
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>,
+				     <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
 
 			clocks = <&gcc GCC_USB0_MASTER_CLK>,
 				 <&gcc GCC_SNOC_USB_CLK>,
diff --git a/src/arm64/qcom/ipq6018.dtsi b/src/arm64/qcom/ipq6018.dtsi
index 61c8fd49c9..4e29adea57 100644
--- a/src/arm64/qcom/ipq6018.dtsi
+++ b/src/arm64/qcom/ipq6018.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq6018.h>
 #include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	#address-cells = <2>;
@@ -43,6 +44,7 @@
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
 		CPU1: cpu@1 {
@@ -55,6 +57,7 @@
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
 		CPU2: cpu@2 {
@@ -67,6 +70,7 @@
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
 		CPU3: cpu@3 {
@@ -79,6 +83,7 @@
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-supply = <&ipq6018_s2>;
+			#cooling-cells = <2>;
 		};
 
 		L2_0: l2-cache {
@@ -330,6 +335,16 @@
 			clock-names = "core";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq6018-tsens", "qcom,ipq8074-tsens";
+			reg = <0x0 0x004a9000 0x0 0x1000>,
+			      <0x0 0x004a8000 0x0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		cryptobam: dma-controller@704000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x00704000 0x0 0x20000>;
@@ -418,6 +433,12 @@
 					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
 					       <24000000>;
+
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy";
+
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
@@ -578,6 +599,21 @@
 			status = "disabled";
 		};
 
+		blsp1_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078ba000 0x0 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+			       <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 22>, <&blsp_dma 23>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07984000 0x0 0x1a000>;
@@ -630,6 +666,13 @@
 					       <133330000>,
 					       <24000000>;
 
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
+
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
@@ -867,6 +910,122 @@
 		};
 	};
 
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				nss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				nss-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				wcss-phya0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				wcss-phya1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				lpass-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddrss-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				ddrss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/src/arm64/qcom/ipq8074.dtsi b/src/arm64/qcom/ipq8074.dtsi
index 26441447c8..e5b89753aa 100644
--- a/src/arm64/qcom/ipq8074.dtsi
+++ b/src/arm64/qcom/ipq8074.dtsi
@@ -252,6 +252,8 @@
 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
 			clock-names = "gcc_mdio_ahb_clk";
 
+			clock-frequency = <6250000>;
+
 			status = "disabled";
 		};
 
@@ -627,6 +629,13 @@
 						<133330000>,
 						<19200000>;
 
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
+
 			power-domains = <&gcc USB0_GDSC>;
 
 			resets = <&gcc GCC_USB0_BCR>;
@@ -669,6 +678,13 @@
 						<133330000>,
 						<19200000>;
 
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
+
 			power-domains = <&gcc USB1_GDSC>;
 
 			resets = <&gcc GCC_USB1_BCR>;
diff --git a/src/arm64/qcom/ipq9574.dtsi b/src/arm64/qcom/ipq9574.dtsi
index 5f83ee42a7..7f2e5cbf3b 100644
--- a/src/arm64/qcom/ipq9574.dtsi
+++ b/src/arm64/qcom/ipq9574.dtsi
@@ -321,8 +321,10 @@
 
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
-			reg-names = "hc", "cqhci";
+			reg = <0x07804000 0x1000>,
+			      <0x07805000 0x1000>,
+			      <0x07808000 0x2000>;
+			reg-names = "hc", "cqhci", "ice";
 
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -330,9 +332,11 @@
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board_clk>;
-			clock-names = "iface", "core", "xo";
+				 <&xo_board_clk>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
 			non-removable;
+			supports-cqe;
 			status = "disabled";
 		};
 
diff --git a/src/arm64/qcom/msm8216-samsung-fortuna3g.dts b/src/arm64/qcom/msm8216-samsung-fortuna3g.dts
new file mode 100644
index 0000000000..366914be7d
--- /dev/null
+++ b/src/arm64/qcom/msm8216-samsung-fortuna3g.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530H)";
+	compatible = "samsung,fortuna3g", "qcom,msm8916";
+	chassis-type = "handset";
+};
diff --git a/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi b/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
new file mode 100644
index 0000000000..c2800ad2dd
--- /dev/null
+++ b/src/arm64/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85a00000 {
+			reg = <0x0 0x85a00000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	haptic {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	muic: extcon@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuel-gauge@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+
+		interrupts-extended = <&tlmm 121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fg_alert_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio72";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts b/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts
new file mode 100644
index 0000000000..9d65fa58ba
--- /dev/null
+++ b/src/arm64/qcom/msm8916-samsung-gprimeltecan.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530W)";
+	compatible = "samsung,gprimeltecan", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reserved-memory {
+		/* Firmware for gprimeltecan needs more space */
+		/delete-node/ tz-apps@85a00000;
+
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+};
+
+&mpss_mem {
+	/* Firmware for gprimeltecan needs more space */
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
diff --git a/src/arm64/qcom/msm8916-samsung-grandprimelte.dts b/src/arm64/qcom/msm8916-samsung-grandprimelte.dts
new file mode 100644
index 0000000000..a66ce4b135
--- /dev/null
+++ b/src/arm64/qcom/msm8916-samsung-grandprimelte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Grand Prime (SM-G530FZ)";
+	compatible = "samsung,grandprimelte", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&mpss_mem {
+	/* Firmware for grandprimelte needs more space */
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
diff --git a/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi b/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
new file mode 100644
index 0000000000..42843771ae
--- /dev/null
+++ b/src/arm64/qcom/msm8916-samsung-rossa-common.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-fortuna-common.dtsi"
+
+/* SM5504 MUIC instead of SM5502 */
+/delete-node/ &muic;
+
+&blsp_i2c1 {
+	muic: extcon@14 {
+		compatible = "siliconmitus,sm5504-muic";
+		reg = <0x14>;
+		interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+	};
+};
diff --git a/src/arm64/qcom/msm8916-samsung-rossa.dts b/src/arm64/qcom/msm8916-samsung-rossa.dts
new file mode 100644
index 0000000000..ebaa13c6b0
--- /dev/null
+++ b/src/arm64/qcom/msm8916-samsung-rossa.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-rossa-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Core Prime LTE";
+	compatible = "samsung,rossa", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&mpss_mem {
+	/* Firmware for rossa needs more space */
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
diff --git a/src/arm64/qcom/msm8916.dtsi b/src/arm64/qcom/msm8916.dtsi
index e423c57ddd..cedff4166b 100644
--- a/src/arm64/qcom/msm8916.dtsi
+++ b/src/arm64/qcom/msm8916.dtsi
@@ -1785,6 +1785,8 @@
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&gpu_opp_table>;
 			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			gpu_opp_table: opp-table {
@@ -2688,6 +2690,13 @@
 
 			thermal-sensors = <&tsens 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				gpu_alert0: trip-point0 {
 					temperature = <75000>;
diff --git a/src/arm64/qcom/msm8939.dtsi b/src/arm64/qcom/msm8939.dtsi
index 82d85ff610..dd45975682 100644
--- a/src/arm64/qcom/msm8939.dtsi
+++ b/src/arm64/qcom/msm8939.dtsi
@@ -1427,6 +1427,8 @@
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&opp_table>;
 			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			opp_table: opp-table {
@@ -2456,6 +2458,13 @@
 
 			thermal-sensors = <&tsens 3>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				gpu_alert0: trip-point0 {
 					temperature = <75000>;
@@ -2463,7 +2472,7 @@
 					type = "passive";
 				};
 
-				gpu_crit: gpu_crit {
+				gpu_crit: gpu-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
diff --git a/src/arm64/qcom/msm8953.dtsi b/src/arm64/qcom/msm8953.dtsi
index ad2f8cf9c9..f1011bb641 100644
--- a/src/arm64/qcom/msm8953.dtsi
+++ b/src/arm64/qcom/msm8953.dtsi
@@ -859,6 +859,8 @@
 				      "vsync",
 				      "core";
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1044,6 +1046,125 @@
 			};
 		};
 
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-506.0", "qcom,adreno";
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GCC_OXILI_TIMER_CLK>,
+				 <&gcc GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&gpu_iommu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&zap_shader_region>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-133300000 {
+					opp-hz = /bits/ 64 <133300000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				/*
+				 * This opp is only available on msm8953 and
+				 * sdm632, the max for sdm450 is 600MHz.
+				 */
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
+		gpu_iommu: iommu@1c48000 {
+			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2";
+			ranges = <0 0x01c48000 0x8000>;
+
+			clocks = <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+
+			qcom,iommu-secure-id = <18>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* gfx3d_user */
+			iommu-ctx@0 {
+				compatible = "qcom,msm-iommu-v2-ns";
+				reg = <0x0000 0x1000>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d_secure */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v2-sec";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
 			ranges = <0 0x01e20000 0x20000>;
@@ -1160,9 +1281,12 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
@@ -2012,6 +2136,33 @@
 				};
 			};
 		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi b/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
index cbc84459a5..10cd244dea 100644
--- a/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/src/arm64/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -377,7 +377,7 @@
 &blsp2_i2c1 {
 	status = "okay";
 
-	sideinteraction: ad7147_captouch@2c {
+	sideinteraction: touch@2c {
 		compatible = "ad,ad7147_captouch";
 		reg = <0x2c>;
 
diff --git a/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
index 9dbde79f26..0163d41f95 100644
--- a/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -79,7 +79,7 @@
 			pmsg-size = <0x80000>;
 		};
 
-		fb_region: fb_region@40000000 {
+		fb_region: fb@40000000 {
 			reg = <0 0x40000000 0 0x1000000>;
 			no-map;
 		};
diff --git a/src/arm64/qcom/msm8994.dtsi b/src/arm64/qcom/msm8994.dtsi
index 8295bf1b21..695e541832 100644
--- a/src/arm64/qcom/msm8994.dtsi
+++ b/src/arm64/qcom/msm8994.dtsi
@@ -233,7 +233,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		dfps_data_mem: dfps_data_mem@3400000 {
+		dfps_data_mem: dfps-data@3400000 {
 			reg = <0 0x03400000 0 0x1000>;
 			no-map;
 		};
@@ -243,7 +243,7 @@
 			no-map;
 		};
 
-		smem_mem: smem_region@6a00000 {
+		smem_mem: smem@6a00000 {
 			reg = <0 0x06a00000 0 0x200000>;
 			no-map;
 		};
diff --git a/src/arm64/qcom/msm8996.dtsi b/src/arm64/qcom/msm8996.dtsi
index ee6f87c828..1601e46549 100644
--- a/src/arm64/qcom/msm8996.dtsi
+++ b/src/arm64/qcom/msm8996.dtsi
@@ -756,12 +756,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			qusb2p_hstx_trim: hstx_trim@24e {
+			qusb2p_hstx_trim: hstx-trim@24e {
 				reg = <0x24e 0x2>;
 				bits = <5 4>;
 			};
 
-			qusb2s_hstx_trim: hstx_trim@24f {
+			qusb2s_hstx_trim: hstx-trim@24f {
 				reg = <0x24f 0x1>;
 				bits = <1 4>;
 			};
@@ -2077,7 +2077,7 @@
 				<0 0>,
 				<0 0>,
 				<150000000 300000000>,
-				<0 0>,
+				<75000000 150000000>,
 				<0 0>,
 				<0 0>,
 				<0 0>,
@@ -2096,8 +2096,8 @@
 			compatible = "qcom,msm8996-qmp-ufs-phy";
 			reg = <0x00627000 0x1000>;
 
-			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
-			clock-names = "ref";
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref", "qref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
@@ -3381,8 +3381,12 @@
 			#size-cells = <1>;
 			ranges;
 
-			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq";
 
 			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
 				<&gcc GCC_USB20_MASTER_CLK>,
diff --git a/src/arm64/qcom/msm8998.dtsi b/src/arm64/qcom/msm8998.dtsi
index 2793cc22d3..4dfe2d09ac 100644
--- a/src/arm64/qcom/msm8998.dtsi
+++ b/src/arm64/qcom/msm8998.dtsi
@@ -1047,12 +1047,12 @@
 			compatible = "qcom,msm8998-qmp-ufs-phy";
 			reg = <0x01da7000 0x1000>;
 
-			clock-names =
-				"ref",
-				"ref_aux";
-			clocks =
-				<&gcc GCC_UFS_CLKREF_CLK>,
-				<&gcc GCC_UFS_PHY_AUX_CLK>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK1>,
+				 <&gcc GCC_UFS_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
@@ -1072,6 +1072,11 @@
 			reg = <0x01f60000 0x20000>;
 		};
 
+		tcsr_regs_2: syscon@1fc0000 {
+			compatible = "qcom,msm8998-tcsr", "syscon";
+			reg = <0x01fc0000 0x26000>;
+		};
+
 		tlmm: pinctrl@3400000 {
 			compatible = "qcom,msm8998-pinctrl";
 			reg = <0x03400000 0xc00000>;
@@ -2132,9 +2137,12 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <120000000>;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB_30_GDSC>;
 
@@ -2174,6 +2182,8 @@
 			reset-names = "phy",
 				      "phy_phy";
 
+			qcom,tcsr-reg = <&tcsr_regs_2 0xb244>;
+
 			status = "disabled";
 		};
 
diff --git a/src/arm64/qcom/pm2250.dtsi b/src/arm64/qcom/pm4125.dtsi
similarity index 56%
rename from src/arm64/qcom/pm2250.dtsi
rename to src/arm64/qcom/pm4125.dtsi
index 5f1d15db5c..cf8c822e80 100644
--- a/src/arm64/qcom/pm2250.dtsi
+++ b/src/arm64/qcom/pm4125.dtsi
@@ -19,7 +19,7 @@
 			compatible = "qcom,pm8916-pon";
 			reg = <0x800>;
 
-			pm2250_pwrkey: pwrkey {
+			pm4125_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
@@ -27,7 +27,7 @@
 				bias-pull-up;
 			};
 
-			pm2250_resin: resin {
+			pm4125_resin: resin {
 				compatible = "qcom,pm8941-resin";
 				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
@@ -36,6 +36,36 @@
 			};
 		};
 
+		pm4125_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm4125_typec: typec@1500 {
+			compatible = "qcom,pm4125-typec", "qcom,pmi632-typec";
+			reg = <0x1500>;
+			interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect";
+			vdd-vbus-supply = <&pm4125_vbus>;
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
@@ -43,11 +73,11 @@
 			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm2250_gpios: gpio@c000 {
+		pm4125_gpios: gpio@c000 {
 			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm2250_gpios 0 0 10>;
+			gpio-ranges = <&pm4125_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/src/arm64/qcom/pm6150.dtsi b/src/arm64/qcom/pm6150.dtsi
index ddbaf7280b..11158c2bd5 100644
--- a/src/arm64/qcom/pm6150.dtsi
+++ b/src/arm64/qcom/pm6150.dtsi
@@ -63,6 +63,52 @@
 			};
 		};
 
+		pm6150_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm6150-vbus-reg,
+				      qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pm6150_typec: typec@1500 {
+			compatible = "qcom,pm6150-typec,
+				      qcom,pm8150b-typec";
+			reg = <0x1500>, <0x1700>;
+			interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect",
+					  "sig-tx",
+					  "sig-rx",
+					  "msg-tx",
+					  "msg-rx",
+					  "msg-tx-failed",
+					  "msg-tx-discarded",
+					  "msg-rx-discarded",
+					  "fr-swap";
+			status = "disabled";
+		};
+
 		pm6150_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
diff --git a/src/arm64/qcom/pmi632.dtsi b/src/arm64/qcom/pmi632.dtsi
index 4eb79e0ce4..94d53b1cf6 100644
--- a/src/arm64/qcom/pmi632.dtsi
+++ b/src/arm64/qcom/pmi632.dtsi
@@ -45,6 +45,36 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmi632_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
+			reg = <0x1100>;
+			status = "disabled";
+		};
+
+		pmi632_typec: typec@1500 {
+			compatible = "qcom,pmi632-typec";
+			reg = <0x1500>;
+			interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect";
+			vdd-vbus-supply = <&pmi632_vbus>;
+
+			status = "disabled";
+		};
+
 		pmi632_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -127,6 +157,11 @@
 			status = "disabled";
 		};
 
+		pmi632_pbs_client3: pbs@7400 {
+			compatible = "qcom,pmi632-pbs", "qcom,pbs";
+			reg = <0x7400>;
+		};
+
 		pmi632_sdam_7: nvram@b600 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0xb600>;
@@ -155,6 +190,10 @@
 		pmi632_lpg: pwm {
 			compatible = "qcom,pmi632-lpg";
 
+			nvmem = <&pmi632_sdam_7>;
+			nvmem-names = "lpg_chan_sdam";
+			qcom,pbs = <&pmi632_pbs_client3>;
+
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#pwm-cells = <2>;
diff --git a/src/arm64/qcom/qcm2290.dtsi b/src/arm64/qcom/qcm2290.dtsi
index 0911fb08ed..89beac833d 100644
--- a/src/arm64/qcom/qcm2290.dtsi
+++ b/src/arm64/qcom/qcm2290.dtsi
@@ -442,6 +442,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
@@ -690,6 +695,8 @@
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
diff --git a/src/arm64/qcom/qcm6490-fairphone-fp5.dts b/src/arm64/qcom/qcm6490-fairphone-fp5.dts
index 176898c9db..4ff9fc24e5 100644
--- a/src/arm64/qcom/qcm6490-fairphone-fp5.dts
+++ b/src/arm64/qcom/qcm6490-fairphone-fp5.dts
@@ -71,6 +71,41 @@
 		};
 	};
 
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		cont_splash_mem: cont-splash@e1000000 {
 			reg = <0x0 0xe1000000 0x0 0x2300000>;
@@ -82,6 +117,11 @@
 			no-map;
 		};
 
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
 		rmtfs_mem: memory@f8500000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0xf8500000 0x0 0x600000>;
@@ -886,7 +926,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -915,6 +964,11 @@
 	status = "okay";
 };
 
+&venus {
+	firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
+	status = "okay";
+};
+
 &wifi {
 	qcom,ath11k-calibration-variant = "Fairphone_5";
 	status = "okay";
diff --git a/src/arm64/qcom/qcm6490-idp.dts b/src/arm64/qcom/qcm6490-idp.dts
index 03e97e27d1..e4bfad50a6 100644
--- a/src/arm64/qcom/qcm6490-idp.dts
+++ b/src/arm64/qcom/qcm6490-idp.dts
@@ -5,8 +5,14 @@
 
 /dts-v1/;
 
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sc7280.dtsi"
+#include "pm7250b.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
@@ -109,7 +115,7 @@
 			no-map;
 		};
 
-		trusted_apps_mem: trusted_apps@c1800000 {
+		trusted_apps_mem: trusted-apps@c1800000 {
 			reg = <0x0 0xc1800000 0x0 0x1c00000>;
 			no-map;
 		};
@@ -123,8 +129,8 @@
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <4350000>;
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
 	};
 };
 
@@ -415,6 +421,33 @@
 	};
 };
 
+&pm8350c_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/src/arm64/qcom/qcs404.dtsi b/src/arm64/qcom/qcs404.dtsi
index 2f2eeaf2e9..a05d0234f7 100644
--- a/src/arm64/qcom/qcs404.dtsi
+++ b/src/arm64/qcom/qcs404.dtsi
@@ -675,6 +675,14 @@
 			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "qusb2_phy";
+
 			status = "disabled";
 
 			usb3_dwc3: usb@7580000 {
@@ -704,6 +712,14 @@
 			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
 			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "qusb2_phy";
+
 			status = "disabled";
 
 			usb@78c0000 {
diff --git a/src/arm64/qcom/qcs6490-rb3gen2.dts b/src/arm64/qcom/qcs6490-rb3gen2.dts
index 8bb7d13d85..97824c769b 100644
--- a/src/arm64/qcom/qcs6490-rb3gen2.dts
+++ b/src/arm64/qcom/qcs6490-rb3gen2.dts
@@ -110,7 +110,7 @@
 			no-map;
 		};
 
-		trusted_apps_mem: trusted_apps@c1800000 {
+		trusted_apps_mem: trusted-apps@c1800000 {
 			reg = <0x0 0xc1800000 0x0 0x1c00000>;
 			no-map;
 		};
@@ -124,8 +124,8 @@
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <4350000>;
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
 	};
 };
 
@@ -413,6 +413,23 @@
 	};
 };
 
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/src/arm64/qcom/qrb2210-rb1.dts b/src/arm64/qcom/qrb2210-rb1.dts
index aa53b6af6d..6e9dd0312a 100644
--- a/src/arm64/qcom/qrb2210-rb1.dts
+++ b/src/arm64/qcom/qrb2210-rb1.dts
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/leds/common.h>
 #include "qcm2290.dtsi"
-#include "pm2250.dtsi"
+#include "pm4125.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Robotics RB1";
@@ -177,6 +177,24 @@
 	};
 };
 
+&CPU_PD0 {
+	/delete-property/ power-domains;
+};
+
+&CPU_PD1 {
+	/delete-property/ power-domains;
+};
+
+&CPU_PD2 {
+	/delete-property/ power-domains;
+};
+
+&CPU_PD3 {
+	/delete-property/ power-domains;
+};
+
+/delete-node/ &CLUSTER_PD;
+
 &gpi_dma0 {
 	status = "okay";
 };
@@ -226,7 +244,7 @@
 };
 
 &mdss_dsi0 {
-	vdda-supply = <&pm2250_l5>;
+	vdda-supply = <&pm4125_l5>;
 	status = "okay";
 };
 
@@ -239,7 +257,7 @@
 	status = "okay";
 };
 
-&pm2250_resin {
+&pm4125_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
@@ -263,23 +281,23 @@
 		compatible = "qcom,rpm-pm2250-regulators";
 		vdd_s3-supply = <&vph_pwr>;
 		vdd_s4-supply = <&vph_pwr>;
-		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>;
+		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>;
 		vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
-		vdd_l13_l14_l15_l16-supply = <&pm2250_s4>;
+		vdd_l13_l14_l15_l16-supply = <&pm4125_s4>;
 
 		/*
 		 * S1 - VDD_APC
 		 * S2 - VDD_CX
 		 */
 
-		pm2250_s3: s3 {
+		pm4125_s3: s3 {
 			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
 			regulator-min-microvolt = <1352000>;
 			regulator-max-microvolt = <1352000>;
 			regulator-boot-on;
 		};
 
-		pm2250_s4: s4 {
+		pm4125_s4: s4 {
 			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
 			regulator-min-microvolt = <2072000>;
 			regulator-max-microvolt = <2072000>;
@@ -288,7 +306,7 @@
 
 		/* L1 - VDD_MX */
 
-		pm2250_l2: l2 {
+		pm4125_l2: l2 {
 			/* LPDDR4X VDD2 */
 			regulator-min-microvolt = <1136000>;
 			regulator-max-microvolt = <1136000>;
@@ -296,7 +314,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l3: l3 {
+		pm4125_l3: l3 {
 			/* LPDDR4X VDDQ */
 			regulator-min-microvolt = <616000>;
 			regulator-max-microvolt = <616000>;
@@ -304,14 +322,14 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l4: l4 {
+		pm4125_l4: l4 {
 			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2700000>;
 			regulator-allow-set-load;
 		};
 
-		pm2250_l5: l5 {
+		pm4125_l5: l5 {
 			/* CSI/DSI */
 			regulator-min-microvolt = <1232000>;
 			regulator-max-microvolt = <1232000>;
@@ -319,7 +337,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l6: l6 {
+		pm4125_l6: l6 {
 			/* DRAM PLL */
 			regulator-min-microvolt = <928000>;
 			regulator-max-microvolt = <928000>;
@@ -327,7 +345,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l7: l7 {
+		pm4125_l7: l7 {
 			/* Wi-Fi CX/MX */
 			regulator-min-microvolt = <664000>;
 			regulator-max-microvolt = <664000>;
@@ -338,20 +356,20 @@
 		 * L9 - VDD_LPI_MX
 		 */
 
-		pm2250_l10: l10 {
+		pm4125_l10: l10 {
 			/* Wi-Fi RFA */
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
 		};
 
-		pm2250_l11: l11 {
+		pm4125_l11: l11 {
 			/* GPS RF1 */
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 		};
 
-		pm2250_l12: l12 {
+		pm4125_l12: l12 {
 			/* USB PHYs */
 			regulator-min-microvolt = <928000>;
 			regulator-max-microvolt = <928000>;
@@ -359,7 +377,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l13: l13 {
+		pm4125_l13: l13 {
 			/* USB/QFPROM/PLLs */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -367,7 +385,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l14: l14 {
+		pm4125_l14: l14 {
 			/* SDHCI1 VQMMC */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -376,7 +394,7 @@
 			regulator-always-on;
 		};
 
-		pm2250_l15: l15 {
+		pm4125_l15: l15 {
 			/* WCD/DSI/BT VDDIO */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -385,38 +403,38 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l16: l16 {
+		pm4125_l16: l16 {
 			/* GPS RF2 */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 		};
 
-		pm2250_l17: l17 {
+		pm4125_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 		};
 
-		pm2250_l18: l18 {
+		pm4125_l18: l18 {
 			/* VDD_PXn */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		pm2250_l19: l19 {
+		pm4125_l19: l19 {
 			/* VDD_PXn */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		pm2250_l20: l20 {
+		pm4125_l20: l20 {
 			/* SDHCI1 VMMC */
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <3600000>;
 			regulator-allow-set-load;
 		};
 
-		pm2250_l21: l21 {
+		pm4125_l21: l21 {
 			/* SDHCI2 VMMC */
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <3300000>;
@@ -424,7 +442,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l22: l22 {
+		pm4125_l22: l22 {
 			/* Wi-Fi */
 			regulator-min-microvolt = <3312000>;
 			regulator-max-microvolt = <3312000>;
@@ -433,8 +451,8 @@
 };
 
 &sdhc_1 {
-	vmmc-supply = <&pm2250_l20>;
-	vqmmc-supply = <&pm2250_l14>;
+	vmmc-supply = <&pm4125_l20>;
+	vqmmc-supply = <&pm4125_l14>;
 	pinctrl-0 = <&sdc1_state_on>;
 	pinctrl-1 = <&sdc1_state_off>;
 	pinctrl-names = "default", "sleep";
@@ -446,8 +464,8 @@
 };
 
 &sdhc_2 {
-	vmmc-supply = <&pm2250_l21>;
-	vqmmc-supply = <&pm2250_l4>;
+	vmmc-supply = <&pm4125_l21>;
+	vqmmc-supply = <&pm4125_l4>;
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
 	pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
@@ -518,8 +536,8 @@
 };
 
 &usb_qmpphy {
-	vdda-phy-supply = <&pm2250_l12>;
-	vdda-pll-supply = <&pm2250_l13>;
+	vdda-phy-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
 	status = "okay";
 };
 
@@ -528,17 +546,17 @@
 };
 
 &usb_hsphy {
-	vdd-supply = <&pm2250_l12>;
-	vdda-pll-supply = <&pm2250_l13>;
-	vdda-phy-dpdm-supply = <&pm2250_l21>;
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
 	status = "okay";
 };
 
 &wifi {
-	vdd-0.8-cx-mx-supply = <&pm2250_l7>;
-	vdd-1.8-xo-supply = <&pm2250_l13>;
-	vdd-1.3-rfa-supply = <&pm2250_l10>;
-	vdd-3.3-ch0-supply = <&pm2250_l22>;
+	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
+	vdd-1.8-xo-supply = <&pm4125_l13>;
+	vdd-1.3-rfa-supply = <&pm4125_l10>;
+	vdd-3.3-ch0-supply = <&pm4125_l22>;
 	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
 	status = "okay";
 };
diff --git a/src/arm64/qcom/qrb4210-rb2.dts b/src/arm64/qcom/qrb4210-rb2.dts
index 7c19f874fa..696d6d43c5 100644
--- a/src/arm64/qcom/qrb4210-rb2.dts
+++ b/src/arm64/qcom/qrb4210-rb2.dts
@@ -6,8 +6,10 @@
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm4250.dtsi"
 #include "pm6125.dtsi"
+#include "pmi632.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
@@ -256,6 +258,46 @@
 	};
 };
 
+&pmi632_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pmi632_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pmi632_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pmi632_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -607,8 +649,8 @@
 	status = "okay";
 };
 
-&usb_dwc3 {
-	maximum-speed = "super-speed";
+&usb_dwc3_hs {
+	remote-endpoint = <&pmi632_hs_in>;
 };
 
 &usb_hsphy {
@@ -626,6 +668,10 @@
 	status = "okay";
 };
 
+&usb_qmpphy_out {
+	remote-endpoint = <&pmi632_ss_in>;
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
 	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
diff --git a/src/arm64/qcom/sa8155p-adp.dts b/src/arm64/qcom/sa8155p-adp.dts
index 5e4287f8c8..b2cf2c9883 100644
--- a/src/arm64/qcom/sa8155p-adp.dts
+++ b/src/arm64/qcom/sa8155p-adp.dts
@@ -367,6 +367,16 @@
 	};
 };
 
+&pmm8155au_1_gpios {
+	pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
+		pins = "gpio4";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -384,10 +394,10 @@
 &sdhc_2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
 	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
@@ -505,13 +515,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	sdc2_off: sdc2-off-state {
@@ -532,13 +535,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
diff --git a/src/arm64/qcom/sa8295p-adp.dts b/src/arm64/qcom/sa8295p-adp.dts
index fd253942e5..78e933c42c 100644
--- a/src/arm64/qcom/sa8295p-adp.dts
+++ b/src/arm64/qcom/sa8295p-adp.dts
@@ -108,6 +108,13 @@
 			};
 		};
 	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+	};
 };
 
 &apps_rsc {
@@ -266,6 +273,48 @@
 	status = "okay";
 };
 
+&i2c12 {
+	pinctrl-0 = <&qup1_i2c4_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	vdd_gfx: regulator@39 {
+		compatible = "maxim,max20411";
+		reg = <0x39>;
+
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <800000>;
+
+		enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&max20411_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&gpucc {
+	vdd-gfx-supply = <&vdd_gfx>;
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sa8295p/a690_zap.mbn";
+	};
+};
+
+&gpu_smmu {
+	status = "okay";
+};
+
 &mdss0 {
 	status = "okay";
 };
@@ -476,6 +525,10 @@
 	status = "okay";
 };
 
+&qup1 {
+	status = "okay";
+};
+
 &qup2 {
 	status = "okay";
 };
@@ -636,6 +689,14 @@
 
 /* PINCTRL */
 
+&pmm8540a_gpios {
+	max20411_en: max20411-en-state {
+		pins = "gpio2";
+		function = "normal";
+		output-enable;
+	};
+};
+
 &tlmm {
 	pcie2a_default: pcie2a-default-state {
 		clkreq-n-pins {
@@ -728,4 +789,11 @@
 			bias-pull-up;
 		};
 	};
+
+	qup1_i2c4_state: qup1-i2c4-state {
+		pins = "gpio0", "gpio1";
+		function = "qup12";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
diff --git a/src/arm64/qcom/sa8540p-ride.dts b/src/arm64/qcom/sa8540p-ride.dts
index b04f72ec09..177b9dad6f 100644
--- a/src/arm64/qcom/sa8540p-ride.dts
+++ b/src/arm64/qcom/sa8540p-ride.dts
@@ -376,14 +376,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2a_default>;
 
-	status = "okay";
+	status = "disabled";
 };
 
 &pcie2a_phy {
 	vdda-phy-supply = <&vreg_l11a>;
 	vdda-pll-supply = <&vreg_l3a>;
 
-	status = "okay";
+	status = "disabled";
 };
 
 &pcie3a {
diff --git a/src/arm64/qcom/sa8540p.dtsi b/src/arm64/qcom/sa8540p.dtsi
index 96b2c59ad0..23888029cc 100644
--- a/src/arm64/qcom/sa8540p.dtsi
+++ b/src/arm64/qcom/sa8540p.dtsi
@@ -168,6 +168,9 @@
 };
 
 &gpucc {
+	/* SA8295P and SA8540P doesn't provide gfx.lvl */
+	/delete-property/ power-domains;
+
 	status = "disabled";
 };
 
diff --git a/src/arm64/qcom/sa8775p.dtsi b/src/arm64/qcom/sa8775p.dtsi
index a7eaca33d3..231cea1f0f 100644
--- a/src/arm64/qcom/sa8775p.dtsi
+++ b/src/arm64/qcom/sa8775p.dtsi
@@ -356,13 +356,18 @@
 			no-map;
 		};
 
+		ddr_training_checksum: ddr-training-checksum@908c0000 {
+			reg = <0x0 0x908c0000 0x0 0x1000>;
+			no-map;
+		};
+
 		reserved_mem: reserved@908f0000 {
-			reg = <0x0 0x908f0000 0x0 0xf000>;
+			reg = <0x0 0x908f0000 0x0 0xe000>;
 			no-map;
 		};
 
-		secdata_apss_mem: secdata-apss@908ff000 {
-			reg = <0x0 0x908ff000 0x0 0x1000>;
+		secdata_apss_mem: secdata-apss@908fe000 {
+			reg = <0x0 0x908fe000 0x0 0x2000>;
 			no-map;
 		};
 
@@ -373,8 +378,43 @@
 			hwlocks = <&tcsr_mutex 3>;
 		};
 
-		cpucp_fw_mem: cpucp-fw@90b00000 {
-			reg = <0x0 0x90b00000 0x0 0x100000>;
+		tz_sail_mailbox_mem: tz-sail-mailbox@90c00000 {
+			reg = <0x0 0x90c00000 0x0 0x100000>;
+			no-map;
+		};
+
+		sail_mailbox_mem: sail-ss@90d00000 {
+			reg = <0x0 0x90d00000 0x0 0x100000>;
+			no-map;
+		};
+
+		sail_ota_mem: sail-ss@90e00000 {
+			reg = <0x0 0x90e00000 0x0 0x300000>;
+			no-map;
+		};
+
+		aoss_backup_mem: aoss-backup@91b00000 {
+			reg = <0x0 0x91b00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_backup_mem: cpucp-backup@91b40000 {
+			reg = <0x0 0x91b40000 0x0 0x40000>;
+			no-map;
+		};
+
+		tz_config_backup_mem: tz-config-backup@91b80000 {
+			reg = <0x0 0x91b80000 0x0 0x10000>;
+			no-map;
+		};
+
+		ddr_training_data_mem: ddr-training-data@91b90000 {
+			reg = <0x0 0x91b90000 0x0 0x10000>;
+			no-map;
+		};
+
+		cdt_data_backup_mem: cdt-data-backup@91ba0000 {
+			reg = <0x0 0x91ba0000 0x0 0x1000>;
 			no-map;
 		};
 
@@ -433,13 +473,43 @@
 			no-map;
 		};
 
+		audio_mdf_mem: audio-mdf-region@ae000000 {
+			reg = <0x0 0xae000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		firmware_mem: firmware-region@b0000000 {
+			reg = <0x0 0xb0000000 0x0 0x800000>;
+			no-map;
+		};
+
 		hyptz_reserved_mem: hyptz-reserved@beb00000 {
 			reg = <0x0 0xbeb00000 0x0 0x11500000>;
 			no-map;
 		};
 
-		tz_stat_mem: tz-stat@d0000000 {
-			reg = <0x0 0xd0000000 0x0 0x100000>;
+		scmi_mem: scmi-region@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x40000>;
+			no-map;
+		};
+
+		firmware_logs_mem: firmware-logs@d0040000 {
+			reg = <0x0 0xd0040000 0x0 0x10000>;
+			no-map;
+		};
+
+		firmware_audio_mem: firmware-audio@d0050000 {
+			reg = <0x0 0xd0050000 0x0 0x4000>;
+			no-map;
+		};
+
+		firmware_reserved_mem: firmware-reserved@d0054000 {
+			reg = <0x0 0xd0054000 0x0 0x9c000>;
+			no-map;
+		};
+
+		firmware_quantum_test_mem: firmware-quantum-test@d00f0000 {
+			reg = <0x0 0xd00f0000 0x0 0x10000>;
 			no-map;
 		};
 
@@ -453,8 +523,23 @@
 			no-map;
 		};
 
-		trusted_apps_mem: trusted-apps@d1800000 {
-			reg = <0x0 0xd1800000 0x0 0x3900000>;
+		deepsleep_backup_mem: deepsleep-backup@d1800000 {
+			reg = <0x0 0xd1800000 0x0 0x100000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1900000 {
+			reg = <0x0 0xd1900000 0x0 0x3800000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@db100000 {
+			reg = <0x0 0xdb100000 0x0 0x100000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw@db200000 {
+			reg = <0x0 0xdb200000 0x0 0x100000>;
 			no-map;
 		};
 	};
@@ -1615,10 +1700,12 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -1702,10 +1789,12 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -1765,9 +1854,11 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
 
@@ -2394,8 +2485,9 @@
 			      <0x0 0x23016000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
 
 			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
 				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
@@ -2427,8 +2519,9 @@
 			      <0x0 0x23056000 0x0 0x100>;
 			reg-names = "stmmaceth", "rgmii";
 
-			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "sfty";
 
 			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
 				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
diff --git a/src/arm64/qcom/sc7180-trogdor.dtsi b/src/arm64/qcom/sc7180-trogdor.dtsi
index 46aaeba286..5260c63db0 100644
--- a/src/arm64/qcom/sc7180-trogdor.dtsi
+++ b/src/arm64/qcom/sc7180-trogdor.dtsi
@@ -649,6 +649,7 @@ ap_ec_spi: &spi6 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
@@ -943,6 +944,8 @@ ap_spi_fp: &spi10 {
 		vddrf-supply = <&pp1300_l2c>;
 		vddch0-supply = <&pp3300_l10c>;
 		max-speed = <3200000>;
+
+		qcom,local-bd-address-broken;
 	};
 };
 
diff --git a/src/arm64/qcom/sc7180.dtsi b/src/arm64/qcom/sc7180.dtsi
index 4dcaa15cae..2b481e20ae 100644
--- a/src/arm64/qcom/sc7180.dtsi
+++ b/src/arm64/qcom/sc7180.dtsi
@@ -817,7 +817,7 @@
 				bits = <1 3>;
 			};
 
-			gpu_speed_bin: gpu_speed_bin@1d2 {
+			gpu_speed_bin: gpu-speed-bin@1d2 {
 				reg = <0x1d2 0x2>;
 				bits = <5 8>;
 			};
@@ -1532,6 +1532,76 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sc7180-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7180-qmp-ufs-phy",
+				     "qcom,sm7150-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ice: crypto@1d90000 {
+			compatible = "qcom,sc7180-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d90000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sc7180-ipa";
 
@@ -2964,12 +3034,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
diff --git a/src/arm64/qcom/sc7280-chrome-common.dtsi b/src/arm64/qcom/sc7280-chrome-common.dtsi
index c4d00a81da..cecb3e89f7 100644
--- a/src/arm64/qcom/sc7280-chrome-common.dtsi
+++ b/src/arm64/qcom/sc7280-chrome-common.dtsi
@@ -18,6 +18,7 @@
  */
 
 /delete-node/ &cdsp_mem;
+/delete-node/ &domain_idle_states;
 /delete-node/ &gpu_zap_mem;
 /delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
@@ -26,6 +27,18 @@
 /delete-node/ &sec_apps_mem;
 
 / {
+	cpus {
+		domain_idle_states: domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x40003444>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9926>;
+			};
+		};
+	};
+
 	reserved-memory {
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
@@ -39,6 +52,10 @@
 	};
 };
 
+&CLUSTER_PD {
+	domain-idle-states = <&CLUSTER_SLEEP_0>;
+};
+
 &lpass_aon {
 	status = "okay";
 };
@@ -119,6 +136,17 @@
 	dma-coherent;
 };
 
+&venus {
+	iommus = <&apps_smmu 0x2180 0x20>,
+		 <&apps_smmu 0x2184 0x20>;
+
+	status = "okay";
+
+	video-firmware {
+		iommus = <&apps_smmu 0x21a2 0x0>;
+	};
+};
+
 &watchdog {
 	status = "okay";
 };
diff --git a/src/arm64/qcom/sc7280-herobrine.dtsi b/src/arm64/qcom/sc7280-herobrine.dtsi
index 9ea6636125..2ba4ea60cb 100644
--- a/src/arm64/qcom/sc7280-herobrine.dtsi
+++ b/src/arm64/qcom/sc7280-herobrine.dtsi
@@ -548,6 +548,7 @@ ap_ec_spi: &spi10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
diff --git a/src/arm64/qcom/sc7280-idp-ec-h1.dtsi b/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
index ebae545c58..fbfac7534d 100644
--- a/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
+++ b/src/arm64/qcom/sc7280-idp-ec-h1.dtsi
@@ -19,6 +19,7 @@ ap_ec_spi: &spi10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
diff --git a/src/arm64/qcom/sc7280.dtsi b/src/arm64/qcom/sc7280.dtsi
index 83b5b76ba1..41f51d3261 100644
--- a/src/arm64/qcom/sc7280.dtsi
+++ b/src/arm64/qcom/sc7280.dtsi
@@ -202,6 +202,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -229,6 +231,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -251,6 +255,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -273,6 +279,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -295,6 +303,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_400>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <520>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -317,6 +327,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_500>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <520>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -339,6 +351,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_600>;
 			operating-points-v2 = <&cpu4_opp_table>;
+			capacity-dmips-mhz = <1946>;
+			dynamic-power-coefficient = <520>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -361,6 +375,8 @@
 			power-domain-names = "psci";
 			next-level-cache = <&L2_700>;
 			operating-points-v2 = <&cpu7_opp_table>;
+			capacity-dmips-mhz = <1985>;
+			dynamic-power-coefficient = <552>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
@@ -453,15 +469,29 @@
 			};
 		};
 
-		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+		domain_idle_states: domain-idle-states {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
 				compatible = "domain-idle-state";
-				idle-state-name = "cluster-power-down";
-				arm,psci-suspend-param = <0x40003444>;
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41001344>;
 				entry-latency-us = <3263>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_SLEEP_LLCC_OFF: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100b344>;
+				entry-latency-us = <3638>;
 				exit-latency-us = <6562>;
-				min-residency-us = <9926>;
-				local-timer-stop;
+				min-residency-us = <9826>;
 			};
 		};
 	};
@@ -872,7 +902,7 @@
 
 		CLUSTER_PD: power-domain-cluster {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_CX_RET &CLUSTER_SLEEP_LLCC_OFF>;
 		};
 	};
 
@@ -966,7 +996,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speed_bin: gpu_speed_bin@1e9 {
+			gpu_speed_bin: gpu-speed-bin@1e9 {
 				reg = <0x1e9 0x2>;
 				bits = <5 8>;
 			};
@@ -2178,8 +2208,16 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
@@ -2345,6 +2383,8 @@
 				 <&apps_smmu 0x4e6 0x0011>;
 			qcom,ee = <0>;
 			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
 		};
 
 		crypto: crypto@1dfa000 {
@@ -2648,6 +2688,31 @@
 			status = "disabled";
 		};
 
+		slimbam: dma-controller@3a84000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x03a84000 0 0x20000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,controlled-remotely;
+			num-channels  = <31>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x1826 0x0>;
+			status = "disabled";
+		};
+
+		slim: slim-ngd@3ac0000 {
+			compatible = "qcom,slim-ngd-v1.5.0";
+			reg = <0 0x03ac0000 0 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x1826 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		lpass_hm: clock-controller@3c00000 {
 			compatible = "qcom,sc7280-lpasshm";
 			reg = <0 0x03c00000 0 0x28>;
@@ -3582,10 +3647,12 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
 
@@ -3640,7 +3707,7 @@
 			compatible = "qcom,sc7280-adsp-pas";
 			reg = <0 0x03700000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3877,7 +3944,7 @@
 			compatible = "qcom,sc7280-cdsp-pas";
 			reg = <0 0x0a300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4035,11 +4102,13 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq",
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
 					  "ss_phy_irq";
@@ -4065,6 +4134,25 @@
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -4091,10 +4179,11 @@
 					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "cpu-cfg", "video-mem";
 
-			iommus = <&apps_smmu 0x2180 0x20>,
-				 <&apps_smmu 0x2184 0x20>;
+			iommus = <&apps_smmu 0x2180 0x20>;
 			memory-region = <&video_mem>;
 
+			status = "disabled";
+
 			video-decoder {
 				compatible = "venus-decoder";
 			};
@@ -4103,10 +4192,6 @@
 				compatible = "venus-encoder";
 			};
 
-			video-firmware {
-				iommus = <&apps_smmu 0x21a2 0x0>;
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
diff --git a/src/arm64/qcom/sc8180x.dtsi b/src/arm64/qcom/sc8180x.dtsi
index 0430d99091..053f7861c3 100644
--- a/src/arm64/qcom/sc8180x.dtsi
+++ b/src/arm64/qcom/sc8180x.dtsi
@@ -290,7 +290,7 @@
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
+				entry-latency-us = <2411>;
 				exit-latency-us = <1461>;
 				min-residency-us = <4488>;
 				local-timer-stop;
@@ -298,7 +298,15 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <3300>;
+				exit-latency-us = <3300>;
+				min-residency-us = <6000>;
+			};
+
+			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100a344>;
 				entry-latency-us = <3263>;
@@ -582,7 +590,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
 		};
 	};
 
@@ -782,6 +790,7 @@
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "sleep_clk";
+			power-domains = <&rpmhpd SC8180X_CX>;
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -1708,8 +1717,22 @@
 			ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1805,8 +1828,22 @@
 			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1903,8 +1940,22 @@
 			ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -2001,8 +2052,22 @@
 			ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -2131,9 +2196,11 @@
 			reg = <0 0x01d87000 0 0x1000>;
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_EN>;
 			clock-names = "ref",
-				      "ref_aux";
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -2173,6 +2240,8 @@
 			interconnect-names = "gfx-mem";
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
+
 			status = "disabled";
 
 			gpu_opp_table: opp-table {
@@ -2632,7 +2701,7 @@
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
@@ -2692,9 +2761,15 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x420>;
 
@@ -2723,10 +2798,8 @@
 					      "rot",
 					      "lut";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
@@ -3184,7 +3257,7 @@
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
 			clock-names = "aux", "cfg_ahb";
 
-			power-domains = <&dispcc MDSS_GDSC>;
+			power-domains = <&rpmhpd SC8180X_MX>;
 
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -3210,6 +3283,7 @@
 				      "edp_phy_pll_link_clk",
 				      "edp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3248,7 +3322,7 @@
 
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x100000>;
+			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
@@ -3256,6 +3330,11 @@
 			#power-domain-cells = <1>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x0001100>,
@@ -3880,8 +3959,15 @@
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu_top_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -4030,8 +4116,15 @@
 
 			thermal-sensors = <&tsens1 11>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
diff --git a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index eb657e5449..15ae94c160 100644
--- a/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/src/arm64/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -6,10 +6,8 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -855,27 +853,6 @@
 };
 
 &pmk8280_vadc {
-	status = "okay";
-
-	channel@3 {
-		reg = <PMK8350_ADC7_DIE_TEMP>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmk8350_die_temp";
-	};
-
-	channel@44 {
-		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
-		qcom,hw-settle-time = <200>;
-		qcom,ratiometric;
-		label = "pmk8350_xo_therm";
-	};
-
-	channel@103 {
-		reg = <PM8350_ADC7_DIE_TEMP(1)>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmc8280_1_die_temp";
-	};
-
 	channel@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
@@ -904,12 +881,6 @@
 		label = "sys_therm4";
 	};
 
-	channel@303 {
-		reg = <PM8350_ADC7_DIE_TEMP(3)>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmc8280_2_die_temp";
-	};
-
 	channel@344 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
@@ -937,12 +908,6 @@
 		qcom,ratiometric;
 		label = "sys_therm8";
 	};
-
-	channel@403 {
-		reg = <PMR735A_ADC7_DIE_TEMP>;
-		qcom,pre-scaling = <1 1>;
-		label = "pmr735a_die_temp";
-	};
 };
 
 &qup0 {
@@ -1204,7 +1169,7 @@
 };
 
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 
 	vdd-micb-supply = <&vreg_s10b>;
diff --git a/src/arm64/qcom/sc8280xp-pmics.dtsi b/src/arm64/qcom/sc8280xp-pmics.dtsi
index 80ee12ded4..945de77911 100644
--- a/src/arm64/qcom/sc8280xp-pmics.dtsi
+++ b/src/arm64/qcom/sc8280xp-pmics.dtsi
@@ -3,6 +3,9 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
@@ -84,7 +87,37 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
-			status = "disabled";
+
+			channel@3 {
+				reg = <PMK8350_ADC7_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmk8350_die_temp";
+			};
+
+			channel@44 {
+				reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pmk8350_xo_therm";
+			};
+
+			channel@103 {
+				reg = <PM8350_ADC7_DIE_TEMP(1)>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmc8280_1_die_temp";
+			};
+
+			channel@303 {
+				reg = <PM8350_ADC7_DIE_TEMP(3)>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmc8280_2_die_temp";
+			};
+
+			channel@403 {
+				reg = <PMR735A_ADC7_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmr735a_die_temp";
+			};
 		};
 
 		pmk8280_adc_tm: adc-tm@3400 {
@@ -126,6 +159,8 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
 			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>;
+			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
 		};
 
@@ -178,6 +213,8 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
 			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
+			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/src/arm64/qcom/sc8280xp.dtsi b/src/arm64/qcom/sc8280xp.dtsi
index febf28356f..d0f82e1228 100644
--- a/src/arm64/qcom/sc8280xp.dtsi
+++ b/src/arm64/qcom/sc8280xp.dtsi
@@ -1774,6 +1774,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
@@ -1872,6 +1873,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3b_phy>;
 			phy-names = "pciephy";
@@ -1970,6 +1972,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3a_phy>;
 			phy-names = "pciephy";
@@ -2071,6 +2074,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2b_phy>;
 			phy-names = "pciephy";
@@ -2169,6 +2173,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2a_phy>;
 			phy-names = "pciephy";
@@ -2257,9 +2262,12 @@
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
-			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_CARD_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
@@ -2319,9 +2327,12 @@
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
 			reg = <0 0x01da7000 0 0x1000>;
 
-			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
-				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CARD_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_CARD_GDSC>;
 
@@ -2635,7 +2646,7 @@
 			compatible = "qcom,sc8280xp-adsp-pas";
 			reg = <0 0x03000000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2978,7 +2989,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -2994,7 +3005,7 @@
 				};
 			};
 
-			dmic02_sleep: dmic02-sleep-state {
+			dmic23_sleep: dmic23-sleep-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -3451,6 +3462,404 @@
 			};
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac4c000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4c000 0 0x1000>;
+
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac4d000 {
+			compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4d000 0 0x1000>;
+
+			interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci";
+
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			pinctrl-0 = <&cci3_default>;
+			pinctrl-1 = <&cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camss@ac5a000 {
+			compatible = "qcom,sc8280xp-camss";
+
+			reg = <0 0x0ac5a000 0 0x2000>,
+			      <0 0x0ac5c000 0 0x2000>,
+			      <0 0x0ac65000 0 0x2000>,
+			      <0 0x0ac67000 0 0x2000>,
+			      <0 0x0acaf000 0 0x4000>,
+			      <0 0x0acb3000 0 0x1000>,
+			      <0 0x0acb6000 0 0x4000>,
+			      <0 0x0acba000 0 0x1000>,
+			      <0 0x0acbd000 0 0x4000>,
+			      <0 0x0acc1000 0 0x1000>,
+			      <0 0x0acc4000 0 0x4000>,
+			      <0 0x0acc8000 0 0x1000>,
+			      <0 0x0accb000 0 0x4000>,
+			      <0 0x0accf000 0 0x1000>,
+			      <0 0x0acd2000 0 0x4000>,
+			      <0 0x0acd6000 0 0x1000>,
+			      <0 0x0acd9000 0 0x4000>,
+			      <0 0x0acdd000 0 0x1000>,
+			      <0 0x0ace0000 0 0x4000>,
+			      <0 0x0ace4000 0 0x1000>;
+			reg-names = "csiphy2",
+				    "csiphy3",
+				    "csiphy0",
+				    "csiphy1",
+				    "vfe0",
+				    "csid0",
+				    "vfe1",
+				    "csid1",
+				    "vfe2",
+				    "csid2",
+				    "vfe_lite0",
+				    "csid0_lite",
+				    "vfe_lite1",
+				    "csid1_lite",
+				    "vfe_lite2",
+				    "csid2_lite",
+				    "vfe_lite3",
+				    "csid3_lite",
+				    "vfe3",
+				    "csid3";
+
+			interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "csid1_lite",
+					  "vfe_lite1",
+					  "csiphy3",
+					  "csid0",
+					  "vfe0",
+					  "csid1",
+					  "vfe1",
+					  "csid0_lite",
+					  "vfe_lite0",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csid2",
+					  "vfe2",
+					  "csid3_lite",
+					  "csid2_lite",
+					  "vfe_lite3",
+					  "vfe_lite2",
+					  "csid3",
+					  "vfe3";
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc IFE_2_GDSC>,
+					<&camcc IFE_3_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "ife3",
+					     "top";
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CSIPHY0_CLK>,
+				 <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY1_CLK>,
+				 <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY2_CLK>,
+				 <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAMCC_CSIPHY3_CLK>,
+				 <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAMCC_IFE_0_AXI_CLK>,
+				 <&camcc CAMCC_IFE_0_CLK>,
+				 <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_0_CSID_CLK>,
+				 <&camcc CAMCC_IFE_1_AXI_CLK>,
+				 <&camcc CAMCC_IFE_1_CLK>,
+				 <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_1_CSID_CLK>,
+				 <&camcc CAMCC_IFE_2_AXI_CLK>,
+				 <&camcc CAMCC_IFE_2_CLK>,
+				 <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_2_CSID_CLK>,
+				 <&camcc CAMCC_IFE_3_AXI_CLK>,
+				 <&camcc CAMCC_IFE_3_CLK>,
+				 <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_3_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+				 <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "vfe0_axi",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe1_axi",
+				      "vfe1",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe2_axi",
+				      "vfe2",
+				      "vfe2_cphy_rx",
+				      "vfe2_csid",
+				      "vfe3_axi",
+				      "vfe3",
+				      "vfe3_cphy_rx",
+				      "vfe3_csid",
+				      "vfe_lite0",
+				      "vfe_lite0_cphy_rx",
+				      "vfe_lite0_csid",
+				      "vfe_lite1",
+				      "vfe_lite1_cphy_rx",
+				      "vfe_lite1_csid",
+				      "vfe_lite2",
+				      "vfe_lite2_cphy_rx",
+				      "vfe_lite2_csid",
+				      "vfe_lite3",
+				      "vfe_lite3_cphy_rx",
+				      "vfe_lite3_csid",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf";
+
+			iommus = <&apps_smmu 0x2000 0x4e0>,
+				 <&apps_smmu 0x2020 0x4e0>,
+				 <&apps_smmu 0x2040 0x4e0>,
+				 <&apps_smmu 0x2060 0x4e0>,
+				 <&apps_smmu 0x2080 0x4e0>,
+				 <&apps_smmu 0x20e0 0x4e0>,
+				 <&apps_smmu 0x20c0 0x4e0>,
+				 <&apps_smmu 0x20a0 0x4e0>,
+				 <&apps_smmu 0x2400 0x4e0>,
+				 <&apps_smmu 0x2420 0x4e0>,
+				 <&apps_smmu 0x2440 0x4e0>,
+				 <&apps_smmu 0x2460 0x4e0>,
+				 <&apps_smmu 0x2480 0x4e0>,
+				 <&apps_smmu 0x24e0 0x4e0>,
+				 <&apps_smmu 0x24c0 0x4e0>,
+				 <&apps_smmu 0x24a0 0x4e0>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+					<&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cam_ahb",
+					     "cam_hf_mnoc",
+					     "cam_sf_mnoc",
+					     "cam_sf_icp_mnoc";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				port@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc8280xp-camcc";
 			reg = <0 0x0ad00000 0 0x20000>;
@@ -4011,6 +4420,28 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c251000 0 0x1ff>,
+			      <0 0x0c224000 0 0x8>;
+			#qcom,sensors = <11>;
+			interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c252000 0 0x1ff>,
+			      <0 0x0c225000 0 0x8>;
+			#qcom,sensors = <5>;
+			interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		tsens0: thermal-sensor@c263000 {
 			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
@@ -4076,6 +4507,150 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 230>;
 			wakeup-parent = <&pdc>;
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* cci_i2c_sda0, cci_i2c_scl0 */
+					pins = "gpio113", "gpio114";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* cci_i2c_sda1, cci_i2c_scl1 */
+					pins = "gpio115", "gpio116";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* cci_i2c_sda2, cci_i2c_scl2 */
+					pins = "gpio10","gpio11";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* cci_i2c_sda3, cci_i2c_scl3 */
+					pins = "gpio123","gpio124";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_default: cci2-default-state {
+				cci2_i2c0_default: cci2-i2c0-default-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci2_i2c1_default: cci2-i2c1-default-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				cci2_i2c0_sleep: cci2-i2c0-sleep-pins {
+					/* cci_i2c_sda4, cci_i2c_scl4 */
+					pins = "gpio117","gpio118";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci2_i2c1_sleep: cci2-i2c1-sleep-pins {
+					/* cci_i2c_sda5, cci_i2c_scl5 */
+					pins = "gpio12","gpio13";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci3_default: cci3-default-state {
+				cci3_i2c0_default: cci3-i2c0-default-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cci3_i2c1_default: cci3-i2c1-default-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				cci3_i2c0_sleep: cci3-i2c0-sleep-pins {
+					/* cci_i2c_sda6, cci_i2c_scl6 */
+					pins = "gpio145","gpio146";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cci3_i2c1_sleep: cci3-i2c1-sleep-pins {
+					/* cci_i2c_sda7, cci_i2c_scl7 */
+					pins = "gpio164","gpio165";
+					function = "cci_i2c";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -4407,7 +4982,7 @@
 			compatible = "qcom,sc8280xp-nsp0-pas";
 			reg = <0 0x1b300000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4538,7 +5113,7 @@
 			compatible = "qcom,sc8280xp-nsp1-pas";
 			reg = <0 0x21300000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -5212,6 +5787,21 @@
 			};
 		};
 
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
 		mem-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
diff --git a/src/arm64/qcom/sda660-inforce-ifc6560.dts b/src/arm64/qcom/sda660-inforce-ifc6560.dts
index 2ed39d402d..702ab49bbc 100644
--- a/src/arm64/qcom/sda660-inforce-ifc6560.dts
+++ b/src/arm64/qcom/sda660-inforce-ifc6560.dts
@@ -461,3 +461,8 @@
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
+
+&usb3_qmpphy {
+	vdda-phy-supply = <&vreg_l1b_0p925>;
+	status = "okay";
+};
diff --git a/src/arm64/qcom/sdm450-motorola-ali.dts b/src/arm64/qcom/sdm450-motorola-ali.dts
index 362be5719d..e27f3c5d5b 100644
--- a/src/arm64/qcom/sdm450-motorola-ali.dts
+++ b/src/arm64/qcom/sdm450-motorola-ali.dts
@@ -4,7 +4,7 @@
  */
 /dts-v1/;
 
-#include "msm8953.dtsi"
+#include "sdm450.dtsi"
 #include "pm8953.dtsi"
 #include "pmi8950.dtsi"
 
diff --git a/src/arm64/qcom/sdm450.dtsi b/src/arm64/qcom/sdm450.dtsi
new file mode 100644
index 0000000000..b222aeb459
--- /dev/null
+++ b/src/arm64/qcom/sdm450.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> */
+
+#include "msm8953.dtsi"
+
+&gpu_opp_table {
+	/delete-node/ opp-650000000;
+
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-supported-hw = <0xff>;
+		required-opps = <&rpmpd_opp_turbo>;
+	};
+};
diff --git a/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
index 87d0293c72..819a5f8825 100644
--- a/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
@@ -241,6 +241,16 @@
 	};
 };
 
+&pm660l_wled {
+	status = "okay";
+
+	qcom,switching-freq = <800>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-boost-limit = <970>;
+	qcom,current-limit-microamp = <17500>;
+	qcom,num-strings = <2>;
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -658,10 +668,16 @@
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
diff --git a/src/arm64/qcom/sdm630.dtsi b/src/arm64/qcom/sdm630.dtsi
index 513fe5e76b..f5921b80ef 100644
--- a/src/arm64/qcom/sdm630.dtsi
+++ b/src/arm64/qcom/sdm630.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/soc/qcom,apr.h>
 
 / {
@@ -1100,6 +1101,7 @@
 			interconnect-names = "gfx-mem";
 
 			operating-points-v2 = <&gpu_sdm630_opp_table>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -1281,12 +1283,16 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <120000000>;
 
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB_30_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
@@ -1297,17 +1303,38 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 
-				/*
-				 * SDM630 technically supports USB3 but I
-				 * haven't seen any devices making use of it.
-				 */
-				maximum-speed = "high-speed";
-				phys = <&qusb2phy0>;
-				phy-names = "usb2-phy";
+				phys = <&qusb2phy0>, <&usb3_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 			};
 		};
 
+		usb3_qmpphy: phy@c010000 {
+			compatible = "qcom,sdm660-qmp-usb3-phy";
+			reg = <0x0c010000 0x1000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+			status = "disabled";
+		};
+
 		qusb2phy0: phy@c012000 {
 			compatible = "qcom,sdm660-qusb2-phy";
 			reg = <0x0c012000 0x180>;
@@ -1463,8 +1490,12 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <60000000>;
 
-			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq";
 
 			qcom,select-utmi-as-pipe-clk;
 
@@ -2551,6 +2582,13 @@
 
 			thermal-sensors = <&tsens 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&adreno_gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				gpu_alert0: trip-point0 {
 					temperature = <90000>;
diff --git a/src/arm64/qcom/sdm632.dtsi b/src/arm64/qcom/sdm632.dtsi
index 645b9f6a80..95b025ea26 100644
--- a/src/arm64/qcom/sdm632.dtsi
+++ b/src/arm64/qcom/sdm632.dtsi
@@ -79,3 +79,11 @@
 	compatible = "qcom,kryo250";
 	capacity-dmips-mhz = <1980>;
 };
+
+&gpu_opp_table {
+	opp-725000000 {
+		opp-hz = /bits/ 64 <725000000>;
+		opp-supported-hw = <0xff>;
+		required-opps = <&rpmpd_opp_turbo>;
+	};
+};
diff --git a/src/arm64/qcom/sdm660-xiaomi-lavender.dts b/src/arm64/qcom/sdm660-xiaomi-lavender.dts
index 3c47410ba9..7167f75bce 100644
--- a/src/arm64/qcom/sdm660-xiaomi-lavender.dts
+++ b/src/arm64/qcom/sdm660-xiaomi-lavender.dts
@@ -413,10 +413,16 @@
 };
 
 &usb3 {
+	qcom,select-utmi-as-pipe-clk;
+
 	status = "okay";
 };
 
 &usb3_dwc3 {
+	maximum-speed = "high-speed";
+	phys = <&qusb2phy0>;
+	phy-names = "usb2-phy";
+
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
diff --git a/src/arm64/qcom/sdm670.dtsi b/src/arm64/qcom/sdm670.dtsi
index 4d7b77a231..80e81c4233 100644
--- a/src/arm64/qcom/sdm670.dtsi
+++ b/src/arm64/qcom/sdm670.dtsi
@@ -1320,12 +1320,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
diff --git a/src/arm64/qcom/sdm845-cheza.dtsi b/src/arm64/qcom/sdm845-cheza.dtsi
index 0ab5e8f53a..e8276db9ea 100644
--- a/src/arm64/qcom/sdm845-cheza.dtsi
+++ b/src/arm64/qcom/sdm845-cheza.dtsi
@@ -852,6 +852,7 @@ ap_ts_i2c: &i2c14 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_l>;
 		spi-max-frequency = <3000000>;
+		wakeup-source;
 
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
diff --git a/src/arm64/qcom/sdm845-db845c.dts b/src/arm64/qcom/sdm845-db845c.dts
index ab62204565..1f51732819 100644
--- a/src/arm64/qcom/sdm845-db845c.dts
+++ b/src/arm64/qcom/sdm845-db845c.dts
@@ -580,7 +580,7 @@
 &pcie0 {
 	status = "okay";
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
 
diff --git a/src/arm64/qcom/sdm845-oneplus-common.dtsi b/src/arm64/qcom/sdm845-oneplus-common.dtsi
index e821103d49..46e25c5382 100644
--- a/src/arm64/qcom/sdm845-oneplus-common.dtsi
+++ b/src/arm64/qcom/sdm845-oneplus-common.dtsi
@@ -508,13 +508,13 @@
 };
 
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <1>;
 	};
 
-	qi2s@23 {
-		reg = <23>;
+	dai@23 {
+		reg = <QUATERNARY_MI2S_TX>;
 		qcom,sd-lines = <0>;
 	};
 };
diff --git a/src/arm64/qcom/sdm845-shift-axolotl.dts b/src/arm64/qcom/sdm845-shift-axolotl.dts
index fbb8655653..486ce175e6 100644
--- a/src/arm64/qcom/sdm845-shift-axolotl.dts
+++ b/src/arm64/qcom/sdm845-shift-axolotl.dts
@@ -60,7 +60,7 @@
 	};
 
 	reserved-memory {
-		framebuffer_region@9d400000 {
+		framebuffer@9d400000 {
 			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
 			no-map;
 		};
diff --git a/src/arm64/qcom/sdm845.dtsi b/src/arm64/qcom/sdm845.dtsi
index c224482435..2f20be99ee 100644
--- a/src/arm64/qcom/sdm845.dtsi
+++ b/src/arm64/qcom/sdm845.dtsi
@@ -2639,10 +2639,12 @@
 			compatible = "qcom,sdm845-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -3366,8 +3368,8 @@
 
 			qcom,qmp = <&aoss_qmp>;
 
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>;
+			power-domains = <&rpmhpd SDM845_LCX>,
+					<&rpmhpd SDM845_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
@@ -4058,12 +4060,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -4109,12 +4115,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
@@ -4760,6 +4770,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
@@ -5568,7 +5579,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -5588,7 +5599,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -5602,8 +5613,15 @@
 
 			thermal-sensors = <&tsens0 11>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -5617,8 +5635,15 @@
 
 			thermal-sensors = <&tsens0 12>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
diff --git a/src/arm64/qcom/sm4450.dtsi b/src/arm64/qcom/sm4450.dtsi
index 3e7ae3bebb..603c962661 100644
--- a/src/arm64/qcom/sm4450.dtsi
+++ b/src/arm64/qcom/sm4450.dtsi
@@ -17,7 +17,7 @@
 
 	chosen { };
 
-	clocks{
+	clocks {
 		xo_board: xo-board {
 			compatible = "fixed-clock";
 			clock-frequency = <76800000>;
diff --git a/src/arm64/qcom/sm6115.dtsi b/src/arm64/qcom/sm6115.dtsi
index f9849b8bef..aca0a87092 100644
--- a/src/arm64/qcom/sm6115.dtsi
+++ b/src/arm64/qcom/sm6115.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -614,6 +615,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,sm6115-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6115-tlmm";
 			reg = <0x0 0x00500000 0x0 0x400000>,
@@ -878,8 +884,31 @@
 			clock-output-names = "usb3_phy_pipe_clk_src";
 
 			#phy-cells = <0>;
+			orientation-switch;
+
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+			};
 		};
 
 		system_noc: interconnect@1880000 {
@@ -1194,8 +1223,12 @@
 			compatible = "qcom,sm6115-qmp-ufs-phy";
 			reg = <0x0 0x04807000 0x0 0x1000>;
 
-			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -1589,9 +1622,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
@@ -1603,7 +1641,6 @@
 			interconnect-names = "usb-ddr",
 					     "apps-usb";
 
-			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
 			usb_dwc3: usb@4e00000 {
@@ -1618,6 +1655,28 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1649,6 +1708,7 @@
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -3088,7 +3148,7 @@
 					type = "passive";
 				};
 
-				cpu4_crit: cpu_crit {
+				cpu4_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3114,7 +3174,7 @@
 					type = "passive";
 				};
 
-				cpu5_crit: cpu_crit {
+				cpu5_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3140,7 +3200,7 @@
 					type = "passive";
 				};
 
-				cpu6_crit: cpu_crit {
+				cpu6_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3166,7 +3226,7 @@
 					type = "passive";
 				};
 
-				cpu7_crit: cpu_crit {
+				cpu7_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3192,7 +3252,7 @@
 					type = "passive";
 				};
 
-				cpu45_crit: cpu_crit {
+				cpu45_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3218,7 +3278,7 @@
 					type = "passive";
 				};
 
-				cpu67_crit: cpu_crit {
+				cpu67_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3244,7 +3304,7 @@
 					type = "passive";
 				};
 
-				cpu0123_crit: cpu_crit {
+				cpu0123_crit: cpu-crit {
 					temperature = <110000>;
 					hysteresis = <1000>;
 					type = "critical";
@@ -3297,8 +3357,15 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				trip-point0 {
+				gpu_alert0: trip-point0 {
 					temperature = <115000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -3307,7 +3374,7 @@
 				trip-point1 {
 					temperature = <125000>;
 					hysteresis = <1000>;
-					type = "passive";
+					type = "critical";
 				};
 			};
 		};
diff --git a/src/arm64/qcom/sm6125.dtsi b/src/arm64/qcom/sm6125.dtsi
index 1dd3a4056e..98ab083560 100644
--- a/src/arm64/qcom/sm6125.dtsi
+++ b/src/arm64/qcom/sm6125.dtsi
@@ -812,10 +812,12 @@
 			compatible = "qcom,sm6125-qmp-ufs-phy";
 			reg = <0x04807000 0xdb8>;
 
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -1185,9 +1187,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <66666667>;
 
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "qusb2_phy",
+					  "hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			qcom,select-utmi-as-pipe-clk;
diff --git a/src/arm64/qcom/sm6350.dtsi b/src/arm64/qcom/sm6350.dtsi
index 43cffe8e12..0be0535556 100644
--- a/src/arm64/qcom/sm6350.dtsi
+++ b/src/arm64/qcom/sm6350.dtsi
@@ -19,6 +19,7 @@
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -1189,10 +1190,12 @@
 			compatible = "qcom,sm6350-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -1249,7 +1252,7 @@
 			compatible = "qcom,sm6350-adsp-pas";
 			reg = <0 0x03000000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -1325,10 +1328,11 @@
 			qcom,gmu = <&gmu>;
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&pil_gpu_mem>;
 			};
 
@@ -1439,8 +1443,6 @@
 
 			operating-points-v2 = <&gmu_opp_table>;
 
-			status = "disabled";
-
 			gmu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -1509,7 +1511,7 @@
 			compatible = "qcom,sm6350-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -1830,12 +1832,15 @@
 				      "mock_utmi";
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -1966,6 +1971,13 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
 				 <&gcc GCC_DISP_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
@@ -2698,6 +2710,569 @@
 		};
 	};
 
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-left-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_left_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-left-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_left_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-right-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu6_right_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-right-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_right_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-left-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu7_left_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-left-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_left_alert0>;
+					cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-right-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu7_right_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-right-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_right_alert0>;
+					cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpuss0-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpuss1-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		modem-core0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				modem-core0-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-core1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem-core1-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-scl-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem-scl-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem-vec-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				modem-vec-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				npu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6-hvx-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				video-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		clock-frequency = <19200000>;
diff --git a/src/arm64/qcom/sm6375.dtsi b/src/arm64/qcom/sm6375.dtsi
index 7ac8bf26dd..f40509d91b 100644
--- a/src/arm64/qcom/sm6375.dtsi
+++ b/src/arm64/qcom/sm6375.dtsi
@@ -1431,13 +1431,15 @@
 			assigned-clock-rates = <19200000>, <133333333>;
 
 			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
-					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>,
 					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
-					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -1559,7 +1561,7 @@
 			compatible = "qcom,sm6375-adsp-pas";
 			reg = <0 0x0a400000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/src/arm64/qcom/sm7125-xiaomi-common.dtsi b/src/arm64/qcom/sm7125-xiaomi-common.dtsi
index e55cd83c19..29289fa41b 100644
--- a/src/arm64/qcom/sm7125-xiaomi-common.dtsi
+++ b/src/arm64/qcom/sm7125-xiaomi-common.dtsi
@@ -152,6 +152,9 @@
 			regulator-min-microvolt = <824000>;
 			regulator-max-microvolt = <928000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l5a_2p7: ldo5 {
@@ -188,6 +191,9 @@
 			regulator-min-microvolt = <1696000>;
 			regulator-max-microvolt = <1952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13a_1p8: ldo13 {
@@ -230,6 +236,9 @@
 			regulator-min-microvolt = <2696000>;
 			regulator-max-microvolt = <3304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 
@@ -258,6 +267,9 @@
 			regulator-min-microvolt = <1144000>;
 			regulator-max-microvolt = <1304000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c_1p8: ldo4 {
@@ -398,6 +410,20 @@
 	};
 };
 
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l19a_3p0>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l12a_1p8>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	status = "okay";
+};
+
 &usb_1 {
 	qcom,select-utmi-as-pipe-clk;
 	status = "okay";
diff --git a/src/arm64/qcom/sm7125-xiaomi-curtana.dts b/src/arm64/qcom/sm7125-xiaomi-curtana.dts
new file mode 100644
index 0000000000..12f517a849
--- /dev/null
+++ b/src/arm64/qcom/sm7125-xiaomi-curtana.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023, Joe Mason <buddyjojo06@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-common.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9S";
+	compatible = "xiaomi,curtana", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x20022 1>;
+};
diff --git a/src/arm64/qcom/sm7225-fairphone-fp4.dts b/src/arm64/qcom/sm7225-fairphone-fp4.dts
index ade6198055..bc67e8c1fe 100644
--- a/src/arm64/qcom/sm7225-fairphone-fp4.dts
+++ b/src/arm64/qcom/sm7225-fairphone-fp4.dts
@@ -68,6 +68,14 @@
 		};
 	};
 
+	/* Dummy regulator until PM6150L has LCDB VSP/VSN support */
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+	};
+
 	reserved-memory {
 		/*
 		 * The rmtfs memory region in downstream is 'dynamically allocated'
@@ -116,7 +124,7 @@
 };
 
 &adsp {
-	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/adsp.mbn";
 	status = "okay";
 };
 
@@ -361,7 +369,7 @@
 };
 
 &cdsp {
-	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/cdsp.mbn";
 	status = "okay";
 };
 
@@ -373,6 +381,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sm7225/fairphone4/a615_zap.mbn";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -400,12 +416,49 @@
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&pil_ipa_fw_mem>;
-	firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l22a>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "djn,9a-3r063-1102b";
+		reg = <0>;
+
+		backlight = <&pm6150l_wled>;
+		reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+		vdd1-supply = <&vreg_l1e>;
+		vsn-supply = <&lcdb_dummy>;
+		vsp-supply = <&lcdb_dummy>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l18a>;
 	status = "okay";
 };
 
 &mpss {
-	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	firmware-name = "qcom/sm7225/fairphone4/modem.mbn";
 	status = "okay";
 };
 
diff --git a/src/arm64/qcom/sm8150.dtsi b/src/arm64/qcom/sm8150.dtsi
index 761a6757dc..a35c0852b5 100644
--- a/src/arm64/qcom/sm8150.dtsi
+++ b/src/arm64/qcom/sm8150.dtsi
@@ -967,7 +967,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speed_bin: gpu_speed_bin@133 {
+			gpu_speed_bin: gpu-speed-bin@133 {
 				reg = <0x133 0x1>;
 				bits = <5 3>;
 			};
@@ -1843,8 +1843,22 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1858,14 +1872,16 @@
 				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
 				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
 				      "slave_q2a",
-				      "tbu";
+				      "tbu",
+				      "ref";
 
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
@@ -1879,7 +1895,7 @@
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
@@ -1934,8 +1950,22 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1949,14 +1979,16 @@
 				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
 				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "pipe",
 				      "aux",
 				      "cfg",
 				      "bus_master",
 				      "bus_slave",
 				      "slave_q2a",
-				      "tbu";
+				      "tbu",
+				      "ref";
 
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
@@ -2063,10 +2095,12 @@
 			compatible = "qcom,sm8150-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_MEM_CLKREF_CLK>;
 			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
@@ -2198,6 +2232,7 @@
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -2428,7 +2463,7 @@
 				bias-disable;
 			};
 
-			qup_spi6_default: qup-spi6_default-state {
+			qup_spi6_default: qup-spi6-default-state {
 				pins = "gpio4", "gpio5", "gpio6", "gpio7";
 				function = "qup6";
 				drive-strength = <6>;
@@ -2442,7 +2477,7 @@
 				bias-disable;
 			};
 
-			qup_spi7_default: qup-spi7_default-state {
+			qup_spi7_default: qup-spi7-default-state {
 				pins = "gpio98", "gpio99", "gpio100", "gpio101";
 				function = "qup7";
 				drive-strength = <6>;
@@ -3573,12 +3608,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -3645,12 +3684,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
@@ -5067,7 +5110,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -5087,7 +5130,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -5101,8 +5144,15 @@
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -5281,8 +5331,15 @@
 
 			thermal-sensors = <&tsens1 11>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
diff --git a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
index 946365f15a..6f54f50a70 100644
--- a/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/src/arm64/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: BSD-3-Clause
 /*
- * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
+ * Copyright (c) 2022-2024 Jianhua Lu <lujianhua000@gmail.com>
  */
 
 #include <dt-bindings/arm/qcom,ids.h>
@@ -551,6 +551,7 @@
 		vddio-supply = <&vreg_l14a_1p88>;
 		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
 		backlight = <&backlight>;
+		rotation = <90>;
 
 		status = "disabled";
 
diff --git a/src/arm64/qcom/sm8250.dtsi b/src/arm64/qcom/sm8250.dtsi
index 760501c130..7f2333c9d1 100644
--- a/src/arm64/qcom/sm8250.dtsi
+++ b/src/arm64/qcom/sm8250.dtsi
@@ -975,7 +975,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speed_bin: gpu_speed_bin@19b {
+			gpu_speed_bin: gpu-speed-bin@19b {
 				reg = <0x19b 0x1>;
 				bits = <5 3>;
 			};
@@ -2152,8 +2152,14 @@
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0", "msi1", "msi2", "msi3",
-					  "msi4", "msi5", "msi6", "msi7";
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -2248,8 +2254,22 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -2349,8 +2369,22 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -2506,10 +2540,12 @@
 			compatible = "qcom,sm8250-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
-			clock-names = "ref",
-				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1X_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -2888,6 +2924,7 @@
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -3025,7 +3062,7 @@
 			compatible = "qcom,sm8250-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3729,7 +3766,7 @@
 			compatible = "qcom,sm8250-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4128,14 +4165,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			wakeup-source;
@@ -4197,14 +4236,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 			wakeup-source;
@@ -5887,7 +5928,7 @@
 			compatible = "qcom,sm8250-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -6757,7 +6798,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -6777,7 +6818,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -6791,8 +6832,15 @@
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -6926,8 +6974,15 @@
 
 			thermal-sensors = <&tsens1 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
diff --git a/src/arm64/qcom/sm8350.dtsi b/src/arm64/qcom/sm8350.dtsi
index e78c83a897..a5e7dbbd8c 100644
--- a/src/arm64/qcom/sm8350.dtsi
+++ b/src/arm64/qcom/sm8350.dtsi
@@ -1526,8 +1526,14 @@
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi0", "msi1", "msi2", "msi3",
-					  "msi4", "msi5", "msi6", "msi7";
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1611,8 +1617,22 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1726,10 +1746,12 @@
 			compatible = "qcom,sm8350-qmp-ufs-phy";
 			reg = <0 0x01d87000 0 0x1000>;
 
-			clock-names = "ref",
-				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -1847,6 +1869,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -2312,14 +2335,16 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -2385,14 +2410,16 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
@@ -4165,7 +4192,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster0_crit: cluster0_crit {
+				cluster0_crit: cluster0-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -4185,7 +4212,7 @@
 					hysteresis = <2000>;
 					type = "hot";
 				};
-				cluster1_crit: cluster1_crit {
+				cluster1_crit: cluster1-crit {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -4214,8 +4241,15 @@
 
 			thermal-sensors = <&tsens1 1>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
@@ -4229,8 +4263,15 @@
 
 			thermal-sensors = <&tsens1 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <1000>;
 					type = "hot";
diff --git a/src/arm64/qcom/sm8450-hdk.dts b/src/arm64/qcom/sm8450-hdk.dts
index a20d5d76af..0786cff07b 100644
--- a/src/arm64/qcom/sm8450-hdk.dts
+++ b/src/arm64/qcom/sm8450-hdk.dts
@@ -938,8 +938,8 @@
 			"TX DMIC3", "MIC BIAS1",
 			"TX SWR_INPUT0", "ADC1_OUTPUT",
 			"TX SWR_INPUT1", "ADC2_OUTPUT",
-			"TX SWR_INPUT2", "ADC3_OUTPUT",
-			"TX SWR_INPUT3", "ADC4_OUTPUT";
+			"TX SWR_INPUT0", "ADC3_OUTPUT",
+			"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 	wcd-playback-dai-link {
 		link-name = "WCD Playback";
@@ -1147,7 +1147,7 @@
 };
 
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 	vdd-micb-supply = <&vreg_s10b_1p8>;
 	qcom,dmic-sample-rate = <600000>;
diff --git a/src/arm64/qcom/sm8450.dtsi b/src/arm64/qcom/sm8450.dtsi
index 01e4dfc4ba..024d2653cc 100644
--- a/src/arm64/qcom/sm8450.dtsi
+++ b/src/arm64/qcom/sm8450.dtsi
@@ -1028,6 +1028,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1420,6 +1426,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1765,15 +1777,25 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5981 0x1>,
-				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map = <0x0 &gic_its 0x5980 0x1>,
+				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1874,15 +1896,25 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5a01 0x1>,
-				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map = <0x0 &gic_its 0x5a00 0x1>,
+				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -2038,6 +2070,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -3934,7 +3967,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -4485,13 +4518,15 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -4890,6 +4925,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -4909,7 +4951,7 @@
 					type = "passive";
 				};
 
-				gpu0_tj_cfg: tj-cfg {
+				gpu_top_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -4922,6 +4964,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -4941,7 +4990,7 @@
 					type = "passive";
 				};
 
-				gpu1_tj_cfg: tj-cfg {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <5000>;
 					type = "passive";
diff --git a/src/arm64/qcom/sm8550-hdk.dts b/src/arm64/qcom/sm8550-hdk.dts
new file mode 100644
index 0000000000..12d60a0ee0
--- /dev/null
+++ b/src/arm64/qcom/sm8550-hdk.dts
@@ -0,0 +1,1306 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 HDK";
+	compatible = "qcom,sm8550-hdk", "qcom,sm8550";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_out: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 159 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 160 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_ORANGE>;
+			gpios = <&tlmm 162 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	lt9611_1v2: regulator-lt9611-1v2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&vph_pwr>;
+		gpio = <&tlmm 152 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_bob_3v3>;
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		enable-active-high;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_bob_3v3: regulator-vreg-bob-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_BOB_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-HDK";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		qcom,pmic-id = "c";
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo2 supplies SM8550 VDD_LPI_MX */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "e";
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "f";
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "g";
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		qcom,pmic-id = "m";
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		qcom,pmic-id = "n";
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 8 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin>, <&lt9611_rst_pin>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_connector_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+	data-lanes = <0 1>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p9>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		input-enable;
+		output-disable;
+		bias-pull-up;
+		power-source = <1>; /* 1.8 V */
+	};
+
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+/* The RGB signals are routed to 3 separate LEDs on the HDK8550 */
+&pm8550_pwm {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_RED>;
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "off";
+	};
+
+	led@3 {
+		reg = <3>;
+		function = LED_FUNCTION_STATUS;
+		color = <LED_COLOR_ID_BLUE>;
+		default-state = "off";
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9385 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9385 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9385 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9385 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9385 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9385 TX Port 1 (ADC1,2)             <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9385 TX Port 2 (ADC3,4)             <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9385 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9385 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio81";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio82";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio8";
+		function = "gpio";
+		bias-disable;
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio7";
+		function = "gpio";
+		output-high;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s4e_0p95>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa0p8-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p9-supply = <&vreg_s6g_1p86>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/src/arm64/qcom/sm8550-mtp.dts b/src/arm64/qcom/sm8550-mtp.dts
index c1135ad5fa..3d4ad5aac7 100644
--- a/src/arm64/qcom/sm8550-mtp.dts
+++ b/src/arm64/qcom/sm8550-mtp.dts
@@ -106,14 +106,21 @@
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";
@@ -874,7 +881,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
diff --git a/src/arm64/qcom/sm8550-qrd.dts b/src/arm64/qcom/sm8550-qrd.dts
index d401d63e5c..92f0150174 100644
--- a/src/arm64/qcom/sm8550-qrd.dts
+++ b/src/arm64/qcom/sm8550-qrd.dts
@@ -124,14 +124,21 @@
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";
@@ -724,6 +731,10 @@
 		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -960,6 +971,30 @@
 	};
 };
 
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+	};
+};
+
 &swr1 {
 	status = "okay";
 
@@ -978,7 +1013,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
@@ -1028,6 +1063,20 @@
 		bias-pull-down;
 	};
 
+	ts_irq: ts-irq-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio108";
 		function = "gpio";
diff --git a/src/arm64/qcom/sm8550.dtsi b/src/arm64/qcom/sm8550.dtsi
index ee1ba5a8c8..3348bc06db 100644
--- a/src/arm64/qcom/sm8550.dtsi
+++ b/src/arm64/qcom/sm8550.dtsi
@@ -1713,9 +1713,22 @@
 			linux,pci-domain = <0>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1742,6 +1755,8 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
 			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
@@ -1804,9 +1819,22 @@
 			linux,pci-domain = <1>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1838,6 +1866,8 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
+			msi-map = <0x0 &gic_its 0x1480 0x1>,
+				  <0x100 &gic_its 0x1481 0x1>;
 			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
@@ -1907,9 +1937,12 @@
 		ufs_mem_phy: phy@1d80000 {
 			compatible = "qcom,sm8550-qmp-ufs-phy";
 			reg = <0x0 0x01d80000 0x0 0x2000>;
-			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-			clock-names = "ref", "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
 
 			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
 
@@ -1940,6 +1973,7 @@
 			iommus = <&apps_smmu 0x60 0x0>;
 			dma-coherent;
 
+			operating-points-v2 = <&ufs_opp_table>;
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 
@@ -1960,18 +1994,49 @@
 				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<75000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>,
-				<100000000 403000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
 			qcom,ice = <&ice>;
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-75000000 {
+					opp-hz = /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ice: crypto@1d88000 {
@@ -2012,6 +2077,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -2507,7 +2573,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -3133,13 +3199,15 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 			required-opps = <&rpmhpd_opp_nom>;
@@ -3248,7 +3316,7 @@
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;
@@ -4254,6 +4322,7 @@
 						reg = <3>;
 						iommus = <&apps_smmu 0x1003 0x80>,
 							 <&apps_smmu 0x1063 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4261,6 +4330,7 @@
 						reg = <4>;
 						iommus = <&apps_smmu 0x1004 0x80>,
 							 <&apps_smmu 0x1064 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4268,6 +4338,7 @@
 						reg = <5>;
 						iommus = <&apps_smmu 0x1005 0x80>,
 							 <&apps_smmu 0x1065 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -4275,6 +4346,7 @@
 						reg = <6>;
 						iommus = <&apps_smmu 0x1006 0x80>,
 							 <&apps_smmu 0x1066 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -4282,6 +4354,7 @@
 						reg = <7>;
 						iommus = <&apps_smmu 0x1007 0x80>,
 							 <&apps_smmu 0x1067 0x0>;
+						dma-coherent;
 					};
 				};
 
@@ -4388,6 +4461,7 @@
 						iommus = <&apps_smmu 0x1961 0x0>,
 							 <&apps_smmu 0x0c01 0x20>,
 							 <&apps_smmu 0x19c1 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@2 {
@@ -4396,6 +4470,7 @@
 						iommus = <&apps_smmu 0x1962 0x0>,
 							 <&apps_smmu 0x0c02 0x20>,
 							 <&apps_smmu 0x19c2 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@3 {
@@ -4404,6 +4479,7 @@
 						iommus = <&apps_smmu 0x1963 0x0>,
 							 <&apps_smmu 0x0c03 0x20>,
 							 <&apps_smmu 0x19c3 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4412,6 +4488,7 @@
 						iommus = <&apps_smmu 0x1964 0x0>,
 							 <&apps_smmu 0x0c04 0x20>,
 							 <&apps_smmu 0x19c4 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4420,6 +4497,7 @@
 						iommus = <&apps_smmu 0x1965 0x0>,
 							 <&apps_smmu 0x0c05 0x20>,
 							 <&apps_smmu 0x19c5 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -4428,6 +4506,7 @@
 						iommus = <&apps_smmu 0x1966 0x0>,
 							 <&apps_smmu 0x0c06 0x20>,
 							 <&apps_smmu 0x19c6 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -4436,6 +4515,7 @@
 						iommus = <&apps_smmu 0x1967 0x0>,
 							 <&apps_smmu 0x0c07 0x20>,
 							 <&apps_smmu 0x19c7 0x10>;
+						dma-coherent;
 					};
 
 					compute-cb@8 {
@@ -4444,6 +4524,7 @@
 						iommus = <&apps_smmu 0x1968 0x0>,
 							 <&apps_smmu 0x0c08 0x20>,
 							 <&apps_smmu 0x19c8 0x10>;
+						dma-coherent;
 					};
 
 					/* note: secure cb9 in downstream */
@@ -5304,6 +5385,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 1>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu0_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5336,6 +5424,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 2>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5368,6 +5463,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 3>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu2_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5400,6 +5502,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 4>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu3_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5432,6 +5541,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 5>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu4_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5464,6 +5580,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 6>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu5_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5496,6 +5619,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 7>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu6_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -5528,6 +5658,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens2 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu7_junction_config>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
diff --git a/src/arm64/qcom/sm8650-mtp.dts b/src/arm64/qcom/sm8650-mtp.dts
index be133a3d5c..4450273f96 100644
--- a/src/arm64/qcom/sm8650-mtp.dts
+++ b/src/arm64/qcom/sm8650-mtp.dts
@@ -66,6 +66,29 @@
 		};
 	};
 
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-MTP";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT";
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -428,6 +451,138 @@
 						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6c_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p056: ldo2 {
+			regulator-name = "vreg_l2n_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &dispcc {
diff --git a/src/arm64/qcom/sm8650-qrd.dts b/src/arm64/qcom/sm8650-qrd.dts
index b9151c2ddf..b07cac2e5b 100644
--- a/src/arm64/qcom/sm8650-qrd.dts
+++ b/src/arm64/qcom/sm8650-qrd.dts
@@ -77,9 +77,83 @@
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&redriver_ss_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&wcd_usbss_sbu_mux>;
+				    };
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8650-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
+				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT2", "ADC3_OUTPUT",
+				"TX SWR_INPUT3", "ADC4_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
 			};
 		};
 	};
@@ -94,6 +168,41 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	wcd939x: audio-codec {
+		compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			wcd_codec_headset_in: endpoint {
+				remote-endpoint = <&wcd_usbss_headset_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -436,6 +545,138 @@
 						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6c_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p1: ldo1 {
+			regulator-name = "vreg_l1m_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_2p8: ldo6 {
+			regulator-name = "vreg_l6m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p96: ldo7 {
+			regulator-name = "vreg_l7m_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+		vdd-l5-supply = <&vreg_bob2>;
+		vdd-l6-supply = <&vreg_bob2>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p056: ldo2 {
+			regulator-name = "vreg_l2n_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_1p8: ldo3 {
+			regulator-name = "vreg_l3n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_1p8: ldo4 {
+			regulator-name = "vreg_l4n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_2p8: ldo5 {
+			regulator-name = "vreg_l5n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_2p8: ldo6 {
+			regulator-name = "vreg_l6n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_3p3: ldo7 {
+			regulator-name = "vreg_l7n_3p3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &dispcc {
@@ -446,6 +687,78 @@
 	status = "okay";
 };
 
+&i2c3 {
+       status = "okay";
+
+       wcd_usbss: typec-mux@e {
+		compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
+		reg = <0xe>;
+
+		vdd-supply = <&vreg_l15b_1p8>;
+		reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
+
+		mode-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				wcd_usbss_sbu_mux: endpoint {
+					remote-endpoint = <&pmic_glink_sbu>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				wcd_usbss_headset_out: endpoint {
+					remote-endpoint = <&wcd_codec_headset_in>;
+				};
+			};
+		};
+       };
+};
+
+&i2c6 {
+	status = "okay";
+
+	typec-mux@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
 &ipa {
 	qcom,gsi-loader = "self";
 	memory-region = <&ipa_fw_mem>;
@@ -453,6 +766,16 @@
 	status = "okay";
 };
 
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -495,6 +818,15 @@
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
 &mdss_mdp {
 	status = "okay";
 };
@@ -600,6 +932,11 @@
 	status = "okay";
 };
 
+&qup_i2c3_data_clk {
+	/* Use internal I2C pull-up */
+	bias-pull-up = <2200>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -657,6 +994,74 @@
 	};
 };
 
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9395 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010e00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
+		 * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
+		 * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
+		 * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
+		 * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
+		 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5 9>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9395 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010e00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
+		 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
+		 * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
+		 */
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
 &tlmm {
 	/* Reserved I/Os for NFC */
 	gpio-reserved-ranges = <32 8>, <74 1>;
@@ -704,6 +1109,14 @@
 		bias-pull-down;
 	};
 
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
 	ts_irq: ts-irq-state {
 		pins = "gpio161";
 		function = "gpio";
@@ -718,6 +1131,14 @@
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart14 {
@@ -787,7 +1208,7 @@
 };
 
 &usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -803,9 +1224,23 @@
 	vdda-phy-supply = <&vreg_l3i_1p2>;
 	vdda-pll-supply = <&vreg_l3g_0p91>;
 
+	orientation-switch;
+
 	status = "okay";
 };
 
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
 &xo_board {
 	clock-frequency = <76800000>;
 };
diff --git a/src/arm64/qcom/sm8650.dtsi b/src/arm64/qcom/sm8650.dtsi
index 2df77123a8..eb117866e5 100644
--- a/src/arm64/qcom/sm8650.dtsi
+++ b/src/arm64/qcom/sm8650.dtsi
@@ -525,6 +525,11 @@
 			no-map;
 		};
 
+		qlink_logging_mem: qlink-logging@84800000 {
+			reg = <0 0x84800000 0 0x200000>;
+			no-map;
+		};
+
 		mpss_dsm_mem: mpss-dsm@86b00000 {
 			reg = <0 0x86b00000 0 0x4900000>;
 			no-map;
@@ -1228,7 +1233,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				clock-names = "se";
 
-				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -1250,7 +1255,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
 				clock-names = "se";
 
-				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -2213,8 +2218,22 @@
 			      <0 0x60100000 0 0x100000>;
 			reg-names = "parf", "dbi", "elbi", "atu", "config";
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -2255,6 +2274,10 @@
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
+			msi-map-mask = <0xff00>;
+
 			linux,pci-domain = <0>;
 			num-lanes = <2>;
 			bus-range = <0 0xff>;
@@ -2317,8 +2340,22 @@
 				    "atu",
 				    "config";
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2364,6 +2401,10 @@
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
+			msi-map = <0x0 &gic_its 0x1480 0x1>,
+				  <0x100 &gic_its 0x1481 0x1>;
+			msi-map-mask = <0xff00>;
+
 			linux,pci-domain = <1>;
 			num-lanes = <2>;
 			bus-range = <0 0xff>;
@@ -2448,10 +2489,12 @@
 			compatible = "qcom,sm8650-qmp-ufs-phy";
 			reg = <0 0x01d80000 0 0x2000>;
 
-			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
 			clock-names = "ref",
-				      "ref_aux";
+				      "ref_aux",
+				      "qref";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
@@ -2627,7 +2670,8 @@
 					     "mss";
 
 			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
-					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>,
+					<&qlink_logging_mem>;
 
 			qcom,qmp = <&aoss_qmp>;
 
@@ -2919,7 +2963,7 @@
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
@@ -3703,7 +3747,7 @@
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;
@@ -4808,6 +4852,7 @@
 
 						iommus = <&apps_smmu 0x1003 0x80>,
 							 <&apps_smmu 0x1043 0x20>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4816,6 +4861,7 @@
 
 						iommus = <&apps_smmu 0x1004 0x80>,
 							 <&apps_smmu 0x1044 0x20>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4824,6 +4870,7 @@
 
 						iommus = <&apps_smmu 0x1005 0x80>,
 							 <&apps_smmu 0x1045 0x20>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -4832,6 +4879,7 @@
 
 						iommus = <&apps_smmu 0x1006 0x80>,
 							 <&apps_smmu 0x1046 0x20>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -4841,6 +4889,7 @@
 						iommus = <&apps_smmu 0x1007 0x40>,
 							 <&apps_smmu 0x1067 0x0>,
 							 <&apps_smmu 0x1087 0x0>;
+						dma-coherent;
 					};
 				};
 
@@ -4961,6 +5010,7 @@
 						iommus = <&apps_smmu 0x1961 0x0>,
 							 <&apps_smmu 0x0c01 0x20>,
 							 <&apps_smmu 0x19c1 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@2 {
@@ -4970,6 +5020,7 @@
 						iommus = <&apps_smmu 0x1962 0x0>,
 							 <&apps_smmu 0x0c02 0x20>,
 							 <&apps_smmu 0x19c2 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@3 {
@@ -4979,6 +5030,7 @@
 						iommus = <&apps_smmu 0x1963 0x0>,
 							 <&apps_smmu 0x0c03 0x20>,
 							 <&apps_smmu 0x19c3 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@4 {
@@ -4988,6 +5040,7 @@
 						iommus = <&apps_smmu 0x1964 0x0>,
 							 <&apps_smmu 0x0c04 0x20>,
 							 <&apps_smmu 0x19c4 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@5 {
@@ -4997,6 +5050,7 @@
 						iommus = <&apps_smmu 0x1965 0x0>,
 							 <&apps_smmu 0x0c05 0x20>,
 							 <&apps_smmu 0x19c5 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@6 {
@@ -5006,6 +5060,7 @@
 						iommus = <&apps_smmu 0x1966 0x0>,
 							 <&apps_smmu 0x0c06 0x20>,
 							 <&apps_smmu 0x19c6 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@7 {
@@ -5015,6 +5070,7 @@
 						iommus = <&apps_smmu 0x1967 0x0>,
 							 <&apps_smmu 0x0c07 0x20>,
 							 <&apps_smmu 0x19c7 0x0>;
+						dma-coherent;
 					};
 
 					compute-cb@8 {
@@ -5024,6 +5080,7 @@
 						iommus = <&apps_smmu 0x1968 0x0>,
 							 <&apps_smmu 0x0c08 0x20>,
 							 <&apps_smmu 0x19c8 0x0>;
+						dma-coherent;
 					};
 				};
 			};
diff --git a/src/arm64/qcom/x1e80100-crd.dts b/src/arm64/qcom/x1e80100-crd.dts
index 7532d8eca2..6a0a54532e 100644
--- a/src/arm64/qcom/x1e80100-crd.dts
+++ b/src/arm64/qcom/x1e80100-crd.dts
@@ -18,10 +18,124 @@
 		serial0 = &uart21;
 	};
 
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-CRD";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TwitterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -401,10 +515,251 @@
 	};
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	compatible = "qcom,x1e80100-dp";
+	/delete-property/ #sound-dai-cells;
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
 &qupv3_2 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_01_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		/* pinctrl in left_woofer node because of sharing the GPIO*/
+		powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TwitterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_23_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		/* pinctrl in right_woofer node because of sharing the GPIO*/
+		powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TwitterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <34 2>, /* Unused */
 			       <44 4>, /* SPI (TPM) */
@@ -416,9 +771,104 @@
 		drive-strength = <16>;
 		bias-disable;
 	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
 };
 
 &uart21 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
diff --git a/src/arm64/qcom/x1e80100-qcp.dts b/src/arm64/qcom/x1e80100-qcp.dts
index a37ad9475c..e76d29053d 100644
--- a/src/arm64/qcom/x1e80100-qcp.dts
+++ b/src/arm64/qcom/x1e80100-qcp.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
@@ -31,6 +32,23 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &apps_rsc {
@@ -243,7 +261,7 @@
 		qcom,pmic-id = "e";
 
 		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vph_pwr>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
 
 		vreg_l2e_0p8: ldo2 {
 			regulator-name = "vreg_l2e_0p8";
@@ -349,7 +367,7 @@
 		qcom,pmic-id = "j";
 
 		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vph_pwr>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
 		vdd-l3-supply = <&vreg_s1f_0p7>;
 		vdd-s5-supply = <&vph_pwr>;
 
@@ -383,17 +401,170 @@
 	};
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp3 {
+	compatible = "qcom,x1e80100-dp";
+	/delete-property/ #sound-dai-cells;
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
 &qupv3_2 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <33 3>, /* Unused */
 			       <44 4>, /* SPI (TPM) */
 			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
 };
 
 &uart21 {
 	compatible = "qcom,geni-debug-uart";
 	status = "okay";
 };
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+	usb-role-switch;
+};
diff --git a/src/arm64/qcom/x1e80100.dtsi b/src/arm64/qcom/x1e80100.dtsi
index 6f75fc342c..6b40082bac 100644
--- a/src/arm64/qcom/x1e80100.dtsi
+++ b/src/arm64/qcom/x1e80100.dtsi
@@ -4,14 +4,20 @@
  */
 
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -278,7 +284,7 @@
 
 		domain-idle-states {
 			CLUSTER_CL4: cluster-sleep-0 {
-				compatible = "arm,idle-state";
+				compatible = "domain-idle-state";
 				idle-state-name = "l2-ret";
 				arm,psci-suspend-param = <0x01000044>;
 				entry-latency-us = <350>;
@@ -287,7 +293,7 @@
 			};
 
 			CLUSTER_CL5: cluster-sleep-1 {
-				compatible = "arm,idle-state";
+				compatible = "domain-idle-state";
 				idle-state-name = "ret-pll-off";
 				arm,psci-suspend-param = <0x01000054>;
 				entry-latency-us = <2200>;
@@ -395,16 +401,24 @@
 		CLUSTER_PD0: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+			power-domains = <&SYSTEM_PD>;
 		};
 
 		CLUSTER_PD1: power-domain-cpu-cluster1 {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+			power-domains = <&SYSTEM_PD>;
 		};
 
 		CLUSTER_PD2: power-domain-cpu-cluster2 {
 			#power-domain-cells = <0>;
 			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+			power-domains = <&SYSTEM_PD>;
+		};
+
+		SYSTEM_PD: power-domain-system {
+			#power-domain-cells = <0>;
+			/* TODO: system-wide idle states */
 		};
 	};
 
@@ -662,6 +676,58 @@
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 
@@ -677,13 +743,13 @@
 			clocks = <&bi_tcxo_div2>,
 				 <&sleep_clk>,
 				 <0>,
+				 <&pcie4_phy>,
 				 <0>,
+				 <&pcie6a_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 
 			power-domains = <&rpmhpd RPMHPD_CX>;
 			#clock-cells = <1>;
@@ -691,6 +757,17 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipcc: mailbox@408000 {
+			compatible = "qcom,x1e80100-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
 		gpi_dma2: dma-controller@800000 {
 			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00800000 0 0x60000>;
@@ -1139,7 +1216,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				clock-names = "se";
 
-				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
@@ -2428,6 +2505,126 @@
 			};
 		};
 
+		usb_1_ss0_hsphy: phy@fd3000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x00fd3000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss0_qmpphy: phy@fd5000 {
+			compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+			reg = <0 0x00fd5000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			power-domains = <&gcc GCC_USB_0_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss1_hsphy: phy@fd9000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x00fd9000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss1_qmpphy: phy@fda000 {
+			compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+			reg = <0 0x00fda000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			power-domains = <&gcc GCC_USB_1_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss2_hsphy: phy@fde000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x00fde000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_TERT_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss2_qmpphy: phy@fdf000 {
+			compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+			reg = <0 0x00fdf000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			power-domains = <&gcc GCC_USB_2_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_TERT_BCR>,
+				 <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+		};
+
 		cnoc_main: interconnect@1500000 {
 			compatible = "qcom,x1e80100-cnoc-main";
 			reg = <0 0x1500000 0 0x14400>;
@@ -2536,12 +2733,258 @@
 			#interconnect-cells = <2>;
 		};
 
+		pcie6a: pci@1bf8000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01bf8000 0 0x3000>,
+			      <0 0x70000000 0 0xf1d>,
+			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70001000 0 0x1000>,
+			      <0 0x70100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
+				 <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
+			bus-range = <0 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <7>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
+				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_6A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_6A_BCR>,
+				 <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_6A_GDSC>;
+
+			phys = <&pcie6a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie6a_phy: phy@1bfc000 {
+			compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01bfc000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_6A_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
+				 <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie6a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie4: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x7c000000 0 0xf1d>,
+			      <0 0x7c000f40 0 0xa8>,
+			      <0 0x7c001000 0 0x1000>,
+			      <0 0x7c100000 0 0x100000>,
+			      <0 0x01c0b000 0 0x1000>;
+			reg-names = "parf",
+			            "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
+				 <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_4_BCR>,
+				 <&gcc GCC_PCIE_4_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+			phys = <&pcie4_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie4_phy: phy@1c0e000 {
+			compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_4_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie4_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,x1e80100-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gem_noc: interconnect@26400000 {
 			compatible = "qcom,x1e80100-gem-noc";
 			reg = <0 0x26400000 0 0x311200>;
@@ -2560,6 +3003,331 @@
 			#interconnect-cells = <2>;
 		};
 
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "WSA2";
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,x1e80100-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,x1e80100-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "WSA";
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <1>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x00 0x01 0x03 0x03 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x01 0x02 0x00 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0x00 0x00 0x01 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,x1e80100-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,x1e80100-lpass-lpi-pinctrl", "qcom,sm8550-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>,
+			      <0 0x07250000 0 0x10000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic23_default: dmic23-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
 		lpass_ag_noc: interconnect@7e40000 {
 			compatible = "qcom,x1e80100-lpass-ag-noc";
 			reg = <0 0x7e40000 0 0xE080>;
@@ -2587,6 +3355,849 @@
 			#interconnect-cells = <2>;
 		};
 
+		usb_2_hsphy: phy@88e0000 {
+			compatible = "qcom,x1e80100-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e0000 0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_ss2: usb@a0f8800 {
+			compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+			reg = <0 0x0a0f8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>,
+				 <&gcc GCC_USB30_TERT_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>,
+				 <&gcc GCC_USB30_TERT_SLEEP_CLK>,
+				 <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "noc_aggr",
+				      "noc_aggr_north",
+				      "noc_aggr_south",
+				      "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_TERT_MASTER_CLK>;
+			assigned-clock-rates = <19200000>,
+					       <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 58 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 57 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_TERT_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_TERT_BCR>;
+
+			interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			wakeup-source;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_ss2_dwc3: usb@a000000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a000000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x14a0 0x0>;
+
+				phys = <&usb_1_ss2_hsphy>,
+				       <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+				            "usb3-phy";
+
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,usb3_lpm_capable;
+
+				dma-coherent;
+
+				port {
+					usb_1_ss2_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_2: usb@a2f8800 {
+			compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+			reg = <0 0x0a2f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "noc_aggr",
+				      "noc_aggr_north",
+				      "noc_aggr_south",
+				      "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a200000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a200000 0 0xcd00>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x14e0 0x0>;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+
+				port {
+					usb_2_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1_ss0: usb@a6f8800 {
+			compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>,
+				 <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "noc_aggr",
+				      "noc_aggr_north",
+				      "noc_aggr_south",
+				      "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>,
+					       <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 61 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			wakeup-source;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_ss0_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x1420 0x0>;
+
+				phys = <&usb_1_ss0_hsphy>,
+				       <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,usb3_lpm_capable;
+
+				dma-coherent;
+
+				port {
+					usb_1_ss0_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1_ss1: usb@a8f8800 {
+			compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "noc_aggr",
+				      "noc_aggr_north",
+				      "noc_aggr_south",
+				      "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>,
+					       <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 60 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			wakeup-source;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_ss1_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x1460 0x0>;
+
+				phys = <&usb_1_ss1_hsphy>,
+				       <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,usb3_lpm_capable;
+
+				dma-coherent;
+
+				port {
+					usb_1_ss1_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,x1e80100-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,x1e80100-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+
+						mdss_intf4_out: endpoint {
+							remote-endpoint = <&mdss_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+
+						mdss_intf5_out: endpoint {
+							remote-endpoint = <&mdss_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+
+						mdss_intf6_out: endpoint {
+							remote-endpoint = <&mdss_dp2_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-575000000 {
+						opp-hz = /bits/ 64 <575000000>;
+						required-opps = <&rpmhpd_opp_nom_l1>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,x1e80100-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&mdss_dp0_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&mdss_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,x1e80100-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae99000 0 0x400>,
+				      <0 0xae99400 0 0x400>;
+
+				interrupts-extended = <&mdss 13>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&mdss_dp1_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp1_in: endpoint {
+							remote-endpoint = <&mdss_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp1_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp2: displayport-controller@ae9a000 {
+				compatible = "qcom,x1e80100-dp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9b000 0 0x400>,
+				      <0 0xae9b400 0 0x400>;
+
+				interrupts-extended = <&mdss 14>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dp2_phy 0>,
+							 <&mdss_dp2_phy 1>;
+
+				operating-points-v2 = <&mdss_dp2_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dp2_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp2_in: endpoint {
+							remote-endpoint = <&mdss_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp3: displayport-controller@aea0000 {
+				compatible = "qcom,x1e80100-dp";
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0x600>,
+				      <0 0xaea1000 0 0x400>,
+				      <0 0xaea1400 0 0x400>;
+
+				interrupts-extended = <&mdss 15>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dp3_phy 0>,
+							 <&mdss_dp3_phy 1>;
+
+				operating-points-v2 = <&mdss_dp3_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dp3_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp3_in: endpoint {
+							remote-endpoint = <&mdss_intf5_out>;
+
+							link-frequencies = /bits/ 64 <8100000000>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+		};
+
+		mdss_dp2_phy: phy@aec2a00 {
+			compatible = "qcom,x1e80100-dp-phy";
+			reg = <0 0x0aec2a00 0 0x19c>,
+			      <0 0x0aec2200 0 0xec>,
+			      <0 0x0aec2600 0 0xec>,
+			      <0 0x0aec2000 0 0x1c8>;
+
+			clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb";
+
+			power-domains = <&rpmhpd RPMHPD_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss_dp3_phy: phy@aec5a00 {
+			compatible = "qcom,x1e80100-dp-phy";
+			reg = <0 0x0aec5a00 0 0x19c>,
+			      <0 0x0aec5200 0 0xec>,
+			      <0 0x0aec5600 0 0xec>,
+			      <0 0x0aec5000 0 0x1c8>;
+
+			clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb";
+
+			power-domains = <&rpmhpd RPMHPD_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,x1e80100-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <0>, /* dsi0 */
+				 <0>,
+				 <0>, /* dsi1 */
+				 <0>,
+				 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */
+				 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */
+				 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&mdss_dp2_phy 0>, /* dp2 */
+				 <&mdss_dp2_phy 1>,
+				 <&mdss_dp3_phy 0>, /* dp3 */
+				 <&mdss_dp3_phy 1>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,x1e80100-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -2599,6 +4210,18 @@
 			interrupt-controller;
 		};
 
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,x1e80100-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,x1e80100-tlmm";
 			reg = <0 0x0f100000 0 0xf00000>;
@@ -3170,7 +4793,7 @@
 				/* TX, RX */
 				pins = "gpio86", "gpio87";
 				function = "qup2_se5";
-				drive-strength= <2>;
+				drive-strength = <2>;
 				bias-disable;
 			};
 		};
@@ -3315,7 +4938,6 @@
 			      <0 0x17510000 0 0x10000>,
 			      <0 0x17520000 0 0x10000>;
 			reg-names = "drv-0", "drv-1", "drv-2";
-			qcom,drv-count = <3>;
 
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
@@ -3326,6 +4948,7 @@
 					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
 
 			label = "apps_rsc";
+			power-domains = <&SYSTEM_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
@@ -3514,6 +5137,144 @@
 				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,x1e80100-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&adspslpi_mem>,
+					<&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,x1e80100-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			memory-region = <&cdsp_mem>,
+					<&q6_cdsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
 	};
 
 	timer {
diff --git a/src/arm64/renesas/r8a774a1.dtsi b/src/arm64/renesas/r8a774a1.dtsi
index 95b0a1f6de..a8a44fe5e8 100644
--- a/src/arm64/renesas/r8a774a1.dtsi
+++ b/src/arm64/renesas/r8a774a1.dtsi
@@ -529,6 +529,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -541,7 +542,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -554,7 +557,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -568,6 +573,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -581,6 +587,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a774b1.dtsi b/src/arm64/renesas/r8a774b1.dtsi
index 786660fcde..4fff511e99 100644
--- a/src/arm64/renesas/r8a774b1.dtsi
+++ b/src/arm64/renesas/r8a774b1.dtsi
@@ -413,6 +413,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -425,7 +426,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -438,7 +441,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -452,6 +457,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -465,6 +471,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a774c0.dtsi b/src/arm64/renesas/r8a774c0.dtsi
index eed94ffed7..1ef43d78c3 100644
--- a/src/arm64/renesas/r8a774c0.dtsi
+++ b/src/arm64/renesas/r8a774c0.dtsi
@@ -384,6 +384,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -396,7 +397,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -409,7 +412,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -423,6 +428,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -436,6 +442,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a774e1.dtsi b/src/arm64/renesas/r8a774e1.dtsi
index 175e5d296d..be55ae8394 100644
--- a/src/arm64/renesas/r8a774e1.dtsi
+++ b/src/arm64/renesas/r8a774e1.dtsi
@@ -593,6 +593,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
@@ -605,7 +606,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
@@ -618,7 +621,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
@@ -632,6 +637,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
@@ -645,6 +651,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77951.dtsi b/src/arm64/renesas/r8a77951.dtsi
index a4260d9291..bea4edd17d 100644
--- a/src/arm64/renesas/r8a77951.dtsi
+++ b/src/arm64/renesas/r8a77951.dtsi
@@ -614,6 +614,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -626,7 +627,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -639,7 +642,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -653,6 +658,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -666,6 +672,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77960.dtsi b/src/arm64/renesas/r8a77960.dtsi
index a631ead171..7846fea8e4 100644
--- a/src/arm64/renesas/r8a77960.dtsi
+++ b/src/arm64/renesas/r8a77960.dtsi
@@ -578,6 +578,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -590,7 +591,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -603,7 +606,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -617,6 +622,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -630,6 +636,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77961.dtsi b/src/arm64/renesas/r8a77961.dtsi
index 7254912a24..58f9286a5a 100644
--- a/src/arm64/renesas/r8a77961.dtsi
+++ b/src/arm64/renesas/r8a77961.dtsi
@@ -578,6 +578,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
@@ -590,7 +591,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
@@ -603,7 +606,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
@@ -617,6 +622,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
@@ -630,6 +636,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77965.dtsi b/src/arm64/renesas/r8a77965.dtsi
index e57b902706..692940662d 100644
--- a/src/arm64/renesas/r8a77965.dtsi
+++ b/src/arm64/renesas/r8a77965.dtsi
@@ -449,6 +449,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -461,7 +462,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -474,7 +477,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -488,6 +493,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -501,6 +507,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77970.dtsi b/src/arm64/renesas/r8a77970.dtsi
index ed6e2e47c6..d2d3cecc76 100644
--- a/src/arm64/renesas/r8a77970.dtsi
+++ b/src/arm64/renesas/r8a77970.dtsi
@@ -328,6 +328,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
@@ -340,7 +341,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
@@ -353,7 +356,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
@@ -367,6 +372,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
@@ -380,6 +386,7 @@
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77980.dtsi b/src/arm64/renesas/r8a77980.dtsi
index 5ed2daaca1..c0ba110c74 100644
--- a/src/arm64/renesas/r8a77980.dtsi
+++ b/src/arm64/renesas/r8a77980.dtsi
@@ -357,6 +357,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
@@ -369,7 +370,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
@@ -382,7 +385,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
@@ -395,7 +400,9 @@
 			reg = <0 0xe6fe0000 0 0x30>;
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
@@ -408,7 +415,9 @@
 			reg = <0 0xffc00000 0 0x30>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77990.dtsi b/src/arm64/renesas/r8a77990.dtsi
index 8c2b283423..37063e3f4e 100644
--- a/src/arm64/renesas/r8a77990.dtsi
+++ b/src/arm64/renesas/r8a77990.dtsi
@@ -415,6 +415,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -427,7 +428,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -440,7 +443,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -454,6 +459,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -467,6 +473,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a77995.dtsi b/src/arm64/renesas/r8a77995.dtsi
index 8cf6473c63..89990dd8eb 100644
--- a/src/arm64/renesas/r8a77995.dtsi
+++ b/src/arm64/renesas/r8a77995.dtsi
@@ -336,6 +336,7 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 125>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -348,7 +349,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 124>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -361,7 +364,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 123>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -375,6 +380,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 122>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -388,6 +394,7 @@
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 121>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a779a0.dtsi b/src/arm64/renesas/r8a779a0.dtsi
index 4e67a03564..cfa70b441e 100644
--- a/src/arm64/renesas/r8a779a0.dtsi
+++ b/src/arm64/renesas/r8a779a0.dtsi
@@ -370,6 +370,7 @@
 			interrupts = <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 713>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -382,7 +383,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 714>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -395,7 +398,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 715>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -408,7 +413,9 @@
 			reg = <0 0xe6fe0000 0 0x30>;
 			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 716>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -421,7 +428,9 @@
 			reg = <0 0xffc00000 0 0x30>;
 			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 717>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -658,7 +667,7 @@
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
@@ -706,7 +715,7 @@
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/src/arm64/renesas/r8a779f0.dtsi b/src/arm64/renesas/r8a779f0.dtsi
index 7fb4989cce..72cf30341f 100644
--- a/src/arm64/renesas/r8a779f0.dtsi
+++ b/src/arm64/renesas/r8a779f0.dtsi
@@ -501,6 +501,7 @@
 			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 713>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
@@ -513,7 +514,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 714>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
@@ -526,7 +529,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 715>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
@@ -539,7 +544,9 @@
 			reg = <0 0xe6fe0000 0 0x30>;
 			interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 716>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
@@ -552,7 +559,9 @@
 			reg = <0 0xffc00000 0 0x30>;
 			interrupts = <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 717>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
diff --git a/src/arm64/renesas/r8a779g0-white-hawk-cpu.dts b/src/arm64/renesas/r8a779g0-white-hawk-cpu.dts
new file mode 100644
index 0000000000..c8b1bb50a8
--- /dev/null
+++ b/src/arm64/renesas/r8a779g0-white-hawk-cpu.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the standalone R-Car V4H White Hawk CPU board
+ *
+ * Copyright (C) 2023 Glider bv
+ */
+
+/dts-v1/;
+#include "r8a779g0-white-hawk-cpu.dtsi"
+
+/ {
+	model = "Renesas White Hawk CPU board based on r8a779g0";
+};
diff --git a/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi b/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
index 913f70fe6c..b1fe1aedc2 100644
--- a/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/src/arm64/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -1,378 +1,14 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the White Hawk CPU board
+ * Device Tree Source for the R-Car V4H White Hawk CPU board
  *
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
 #include "r8a779g0.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "white-hawk-cpu-common.dtsi"
 
 / {
 	model = "Renesas White Hawk CPU board";
 	compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
-
-	aliases {
-		ethernet0 = &avb0;
-		serial0 = &hscif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:921600n8";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keys_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW47";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW48";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW49";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-1 {
-			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-		};
-
-		led-2 {
-			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <2>;
-		};
-
-		led-3 {
-			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <3>;
-		};
-	};
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x78000000>;
-	};
-
-	memory@480000000 {
-		device_type = "memory";
-		reg = <0x4 0x80000000 0x0 0x80000000>;
-	};
-
-	memory@600000000 {
-		device_type = "memory";
-		reg = <0x6 0x00000000 0x1 0x00000000>;
-	};
-
-	mini-dp-con {
-		compatible = "dp-connector";
-		label = "CN5";
-		type = "mini";
-
-		port {
-			mini_dp_con_in: endpoint {
-				remote-endpoint = <&sn65dsi86_out>;
-			};
-		};
-	};
-
-	reg_1p2v: regulator-1p2v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.2V";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sn65dsi86_refclk: clk-x6 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <38400000>;
-	};
-};
-
-&avb0 {
-	pinctrl-0 = <&avb0_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&phy0>;
-	tx-internal-delay-ps = <2000>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0022.1622",
-			     "ethernet-phy-ieee802.3-c22";
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&dsi0 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			dsi0_out: endpoint {
-				remote-endpoint = <&sn65dsi86_in>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-&du {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <16666666>;
-};
-
-&extalr_clk {
-	clock-frequency = <32768>;
-};
-
-&hscif0 {
-	pinctrl-0 = <&hscif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	io_expander_a: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	eeprom@50 {
-		compatible = "rohm,br24g01", "atmel,24c01";
-		label = "cpu-board";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	bridge@2c {
-		compatible = "ti,sn65dsi86";
-		reg = <0x2c>;
-
-		clocks = <&sn65dsi86_refclk>;
-		clock-names = "refclk";
-
-		interrupt-parent = <&intc_ex>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-
-		vccio-supply = <&reg_1p8v>;
-		vpll-supply = <&reg_1p8v>;
-		vcca-supply = <&reg_1p2v>;
-		vcc-supply = <&reg_1p2v>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sn65dsi86_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				sn65dsi86_out: endpoint {
-					remote-endpoint = <&mini_dp_con_in>;
-				};
-			};
-		};
-	};
-};
-
-&mmc0 {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-1 = <&mmc_pins>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	bus-width = <8>;
-	no-sd;
-	no-sdio;
-	non-removable;
-	full-pwr-cycle-in-suspend;
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
-	avb0_pins: avb0 {
-		mux {
-			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
-				 "avb0_txcrefclk";
-			function = "avb0";
-		};
-
-		pins_mdio {
-			groups = "avb0_mdio";
-			drive-strength = <21>;
-		};
-
-		pins_mii {
-			groups = "avb0_rgmii";
-			drive-strength = <21>;
-		};
-
-	};
-	hscif0_pins: hscif0 {
-		groups = "hscif0_data";
-		function = "hscif0";
-	};
-
-	i2c0_pins: i2c0 {
-		groups = "i2c0";
-		function = "i2c0";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	keys_pins: keys {
-		pins = "GP_5_0", "GP_5_1", "GP_5_2";
-		bias-pull-up;
-	};
-
-	mmc_pins: mmc {
-		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
-		function = "mmc";
-		power-source = <1800>;
-	};
-
-	qspi0_pins: qspi0 {
-		groups = "qspi0_ctrl", "qspi0_data4";
-		function = "qspi0";
-	};
-
-	scif_clk_pins: scif_clk {
-		groups = "scif_clk";
-		function = "scif_clk";
-	};
-};
-
-&rpc {
-	pinctrl-0 = <&qspi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		compatible = "spansion,s25fs512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-		spi-rx-bus-width = <4>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			boot@0 {
-				reg = <0x0 0x1200000>;
-				read-only;
-			};
-			user@1200000 {
-				reg = <0x1200000 0x2e00000>;
-			};
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/src/arm64/renesas/r8a779g0-white-hawk.dts b/src/arm64/renesas/r8a779g0-white-hawk.dts
index eff1ef6e2c..784d4e8b20 100644
--- a/src/arm64/renesas/r8a779g0-white-hawk.dts
+++ b/src/arm64/renesas/r8a779g0-white-hawk.dts
@@ -1,69 +1,15 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the White Hawk CPU and BreakOut boards
+ * Device Tree Source for the R-Car V4H White Hawk CPU and BreakOut boards
  *
  * Copyright (C) 2022 Renesas Electronics Corp.
  */
 
 /dts-v1/;
 #include "r8a779g0-white-hawk-cpu.dtsi"
-#include "r8a779g0-white-hawk-csi-dsi.dtsi"
-#include "r8a779g0-white-hawk-ethernet.dtsi"
+#include "white-hawk-common.dtsi"
 
 / {
 	model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
 	compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
-
-	can_transceiver0: can-phy0 {
-		compatible = "nxp,tjr1443";
-		#phy-cells = <0>;
-		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		max-bitrate = <5000000>;
-	};
-};
-
-&can_clk {
-	clock-frequency = <40000000>;
-};
-
-&canfd {
-	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-		phys = <&can_transceiver0>;
-	};
-
-	channel1 {
-		status = "okay";
-	};
-};
-
-&i2c0 {
-	eeprom@51 {
-		compatible = "rohm,br24g01", "atmel,24c01";
-		label = "breakout-board";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-};
-
-&pfc {
-	can_clk_pins: can-clk {
-		groups = "can_clk";
-		function = "can_clk";
-	};
-
-	canfd0_pins: canfd0 {
-		groups = "canfd0_data";
-		function = "canfd0";
-	};
-
-	canfd1_pins: canfd1 {
-		groups = "canfd1_data";
-		function = "canfd1";
-	};
 };
diff --git a/src/arm64/renesas/r8a779g0.dtsi b/src/arm64/renesas/r8a779g0.dtsi
index d3d25e077c..9bc542bc61 100644
--- a/src/arm64/renesas/r8a779g0.dtsi
+++ b/src/arm64/renesas/r8a779g0.dtsi
@@ -161,11 +161,6 @@
 		};
 	};
 
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -185,13 +180,24 @@
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
-	/* External SCIF clock - to be overridden by boards that provide it */
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clocks - to be overridden by boards that provide them */
 	scif_clk: scif {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
+	scif_clk2: scif2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -479,6 +485,7 @@
 			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2";
 			clocks = <&cpg CPG_MOD 713>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
@@ -491,7 +498,9 @@
 			reg = <0 0xe6fc0000 0 0x30>;
 			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 714>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
@@ -504,7 +513,9 @@
 			reg = <0 0xe6fd0000 0 0x30>;
 			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 715>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
@@ -517,7 +528,9 @@
 			reg = <0 0xe6fe0000 0 0x30>;
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 716>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
@@ -530,7 +543,9 @@
 			reg = <0 0xffc00000 0 0x30>;
 			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 			clocks = <&cpg CPG_MOD 717>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
@@ -681,7 +696,7 @@
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
 			       <&dmac1 0x35>, <&dmac1 0x34>;
@@ -761,7 +776,7 @@
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -808,7 +823,7 @@
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
@@ -1057,7 +1072,7 @@
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
 			       <&dmac1 0x59>, <&dmac1 0x58>;
@@ -1777,6 +1792,37 @@
 			};
 		};
 
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		ipmmu_rt0: iommu@ee480000 {
 			compatible = "renesas,ipmmu-r8a779g0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
@@ -1886,37 +1932,6 @@
 			#iommu-cells = <1>;
 		};
 
-		mmc0: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a779g0",
-				     "renesas,rcar-gen4-sdhi";
-			reg = <0 0xee140000 0 0x2000>;
-			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 706>,
-				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
-			clock-names = "core", "clkh";
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 706>;
-			max-frequency = <200000000>;
-			iommus = <&ipmmu_ds0 32>;
-			status = "disabled";
-		};
-
-		rpc: spi@ee200000 {
-			compatible = "renesas,r8a779g0-rpc-if",
-				     "renesas,rcar-gen4-rpc-if";
-			reg = <0 0xee200000 0 0x200>,
-			      <0 0x08000000 0 0x04000000>,
-			      <0 0xee208000 0 0x100>;
-			reg-names = "regs", "dirmap", "wbuf";
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 629>;
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 629>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git a/src/arm64/renesas/r8a779g2-white-hawk-single.dts b/src/arm64/renesas/r8a779g2-white-hawk-single.dts
new file mode 100644
index 0000000000..2f79e5a612
--- /dev/null
+++ b/src/arm64/renesas/r8a779g2-white-hawk-single.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H ES2.0 White Hawk Single board
+ *
+ * Copyright (C) 2023 Glider bv
+ */
+
+/dts-v1/;
+#include "r8a779g2.dtsi"
+#include "white-hawk-cpu-common.dtsi"
+#include "white-hawk-common.dtsi"
+
+/ {
+	model = "Renesas White Hawk Single board based on r8a779g2";
+	compatible = "renesas,white-hawk-single", "renesas,r8a779g2",
+		     "renesas,r8a779g0";
+};
+
+&hscif0 {
+	uart-has-rtscts;
+};
+
+&hscif0_pins {
+	groups = "hscif0_data", "hscif0_ctrl";
+	function = "hscif0";
+};
diff --git a/src/arm64/renesas/r8a779g2.dtsi b/src/arm64/renesas/r8a779g2.dtsi
new file mode 100644
index 0000000000..e08f531843
--- /dev/null
+++ b/src/arm64/renesas/r8a779g2.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H (R8A779G2) SoC
+ *
+ * Copyright (C) 2023 Glider bv
+ */
+
+#include "r8a779g0.dtsi"
+
+/ {
+	compatible = "renesas,r8a779g2", "renesas,r8a779g0";
+};
diff --git a/src/arm64/renesas/r8a779h0-gray-hawk-single.dts b/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
new file mode 100644
index 0000000000..bc8616a56c
--- /dev/null
+++ b/src/arm64/renesas/r8a779h0-gray-hawk-single.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M Gray Hawk Single board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ * Copyright (C) 2024 Glider bv
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "r8a779h0.dtsi"
+
+/ {
+	model = "Renesas Gray Hawk Single board based on r8a779h0";
+	compatible = "renesas,gray-hawk-single", "renesas,r8a779h0";
+
+	aliases {
+		serial0 = &hscif0;
+		ethernet0 = &avb0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x1 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+			compatible = "regulator-fixed";
+			regulator-name = "fixed-1.8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "fixed-3.3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+	};
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+
+	eeprom@53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif_clk_pins: scif-clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/src/arm64/renesas/r8a779h0.dtsi b/src/arm64/renesas/r8a779h0.dtsi
new file mode 100644
index 0000000000..1188572918
--- /dev/null
+++ b/src/arm64/renesas/r8a779h0.dtsi
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4M (R8A779H0) SoC
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r8a779h0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/renesas,r8a779h0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779h0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a76_0>;
+				};
+				core1 {
+					cpu = <&a76_1>;
+				};
+				core2 {
+					cpu = <&a76_2>;
+				};
+				core3 {
+					cpu = <&a76_3>;
+				};
+			};
+		};
+
+		a76_0: cpu@0 {
+			compatible = "arm,cortex-a76";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779H0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_1: cpu@100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779H0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA76>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC1>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_2: cpu@200 {
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779H0_PD_A1E0D0C2>;
+			next-level-cache = <&L3_CA76>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_3: cpu@300 {
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779H0_PD_A1E0D0C3>;
+			next-level-cache = <&L3_CA76>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779H0_CLK_ZC3>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
+
+		L3_CA76: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A779H0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779h0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779h0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
+			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
+			      <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>;
+		};
+
+		gpio0: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 19>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+		};
+
+		gpio1: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+		};
+
+		gpio2: gpio@e6058180 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058180 0 0x54>;
+			interrupts = <GIC_SPI 627 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+		};
+
+		gpio3: gpio@e6058980 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058980 0 0x54>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+		};
+
+		gpio4: gpio@e6060180 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060180 0 0x54>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 25>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+		};
+
+		gpio5: gpio@e6060980 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060980 0 0x54>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 21>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+		};
+
+		gpio6: gpio@e6061180 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6061180 0 0x54>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 21>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+		};
+
+		gpio7: gpio@e6061980 {
+			compatible = "renesas,gpio-r8a779h0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6061980 0 0x54>;
+			interrupts = <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 21>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779h0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779h0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779h0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779h0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779h0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779h0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779h0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>,
+			       <&dmac2 0x97>, <&dmac2 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779h0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		avb0: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a779h0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6800000 0 0x1000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 211>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 211>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb1: ethernet@e6810000 {
+			compatible = "renesas,etheravb-r8a779h0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6810000 0 0x1000>;
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 212>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 212>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb2: ethernet@e6820000 {
+			compatible = "renesas,etheravb-r8a779h0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6820000 0 0x1000>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 213>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_C4>;
+			resets = <&cpg 213>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac1: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779h0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779h0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779h0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779H0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779h0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/src/arm64/renesas/r9a07g043u.dtsi b/src/arm64/renesas/r9a07g043u.dtsi
index 2ab231572d..964b0a475e 100644
--- a/src/arm64/renesas/r9a07g043u.dtsi
+++ b/src/arm64/renesas/r9a07g043u.dtsi
@@ -61,6 +61,75 @@
 &soc {
 	interrupt-parent = <&gic>;
 
+	cru: video@10830000 {
+		compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru";
+		reg = <0 0x10830000 0 0x400>;
+		clocks = <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
+			 <&cpg CPG_MOD R9A07G043_CRU_PCLK>,
+			 <&cpg CPG_MOD R9A07G043_CRU_ACLK>;
+		clock-names = "video", "apb", "axi";
+		interrupts = <SOC_PERIPHERAL_IRQ(167) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(168) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(169) IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+		resets = <&cpg R9A07G043_CRU_PRESETN>,
+			 <&cpg R9A07G043_CRU_ARESETN>;
+		reset-names = "presetn", "aresetn";
+		power-domains = <&cpg>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg = <1>;
+				crucsi2: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&csi2cru>;
+				};
+			};
+		};
+	};
+
+	csi2: csi2@10830400 {
+		compatible = "renesas,r9a07g043-csi2", "renesas,rzg2l-csi2";
+		reg = <0 0x10830400 0 0xfc00>;
+		interrupts = <SOC_PERIPHERAL_IRQ(166) IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD R9A07G043_CRU_SYSCLK>,
+			 <&cpg CPG_MOD R9A07G043_CRU_VCLK>,
+			 <&cpg CPG_MOD R9A07G043_CRU_PCLK>;
+		clock-names = "system", "video", "apb";
+		resets = <&cpg R9A07G043_CRU_PRESETN>,
+			 <&cpg R9A07G043_CRU_CMN_RSTB>;
+		reset-names = "presetn", "cmn-rstb";
+		power-domains = <&cpg>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				csi2cru: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&crucsi2>;
+				};
+			};
+		};
+	};
+
 	irqc: interrupt-controller@110a0000 {
 		compatible = "renesas,r9a07g043u-irqc",
 			     "renesas,rzg2l-irqc";
@@ -109,7 +178,13 @@
 			     <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
-			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
+			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_EDGE_RISING>;
 		interrupt-names = "nmi",
 				  "irq0", "irq1", "irq2", "irq3",
 				  "irq4", "irq5", "irq6", "irq7",
@@ -121,7 +196,9 @@
 				  "tint20", "tint21", "tint22", "tint23",
 				  "tint24", "tint25", "tint26", "tint27",
 				  "tint28", "tint29", "tint30", "tint31",
-				  "bus-err";
+				  "bus-err", "ec7tie1-0", "ec7tie2-0",
+				  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+				  "ec7tiovf-1";
 		clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
 			<&cpg CPG_MOD R9A07G043_IA55_PCLK>;
 		clock-names = "clk", "pclk";
diff --git a/src/arm64/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso b/src/arm64/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 0000000000..b41bb4b31a
--- /dev/null
+++ b/src/arm64/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2UL SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(4, 4) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>;
+};
diff --git a/src/arm64/renesas/r9a07g044.dtsi b/src/arm64/renesas/r9a07g044.dtsi
index 66f68fc2b2..9f00b75d2b 100644
--- a/src/arm64/renesas/r9a07g044.dtsi
+++ b/src/arm64/renesas/r9a07g044.dtsi
@@ -793,6 +793,22 @@
 			reset-names = "rst", "arst", "prst";
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
 		};
 
 		vspd: vsp@10870000 {
@@ -820,6 +836,36 @@
 			resets = <&cpg R9A07G044_LCDC_RESET_N>;
 		};
 
+		du: display@10890000 {
+			compatible = "renesas,r9a07g044-du";
+			reg = <0 0x10890000 0 0x10000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_LCDC_RESET_N>;
+			renesas,vsps = <&vspd 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		cpg: clock-controller@11010000 {
 			compatible = "renesas,r9a07g044-cpg";
 			reg = <0 0x11010000 0 0x10000>;
@@ -905,7 +951,27 @@
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
 			clock-names = "clk", "pclk";
diff --git a/src/arm64/renesas/r9a07g054.dtsi b/src/arm64/renesas/r9a07g054.dtsi
index 1f1d481dc7..53d8905f36 100644
--- a/src/arm64/renesas/r9a07g054.dtsi
+++ b/src/arm64/renesas/r9a07g054.dtsi
@@ -798,6 +798,22 @@
 			reset-names = "rst", "arst", "prst";
 			power-domains = <&cpg>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
 		};
 
 		vspd: vsp@10870000 {
@@ -826,6 +842,37 @@
 			resets = <&cpg R9A07G054_LCDC_RESET_N>;
 		};
 
+		du: display@10890000 {
+			compatible = "renesas,r9a07g054-du",
+				     "renesas,r9a07g044-du";
+			reg = <0 0x10890000 0 0x10000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_LCDC_RESET_N>;
+			renesas,vsps = <&vspd 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		cpg: clock-controller@11010000 {
 			compatible = "renesas,r9a07g054-cpg";
 			reg = <0 0x11010000 0 0x10000>;
@@ -912,7 +959,27 @@
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G054_IA55_PCLK>;
 			clock-names = "clk", "pclk";
diff --git a/src/arm64/renesas/r9a08g045.dtsi b/src/arm64/renesas/r9a08g045.dtsi
index 5facfad961..f5f3f4f4c8 100644
--- a/src/arm64/renesas/r9a08g045.dtsi
+++ b/src/arm64/renesas/r9a08g045.dtsi
@@ -42,6 +42,11 @@
 		clock-frequency = <0>;
 	};
 
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -152,7 +157,10 @@
 				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nmi",
 					  "irq0", "irq1", "irq2", "irq3",
 					  "irq4", "irq5", "irq6", "irq7",
@@ -164,7 +172,8 @@
 					  "tint20", "tint21", "tint22", "tint23",
 					  "tint24", "tint25", "tint26", "tint27",
 					  "tint28", "tint29", "tint30", "tint31",
-					  "bus-err";
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0";
 			clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>,
 				 <&cpg CPG_MOD R9A08G045_IA55_PCLK>;
 			clock-names = "clk", "pclk";
@@ -264,6 +273,20 @@
 			      <0x0 0x12440000 0 0x60000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a08g045-wdt", "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A08G045_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A08G045_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
 	};
 
 	timer {
diff --git a/src/arm64/renesas/rzg2l-smarc.dtsi b/src/arm64/renesas/rzg2l-smarc.dtsi
index 37807f1bda..887dffe149 100644
--- a/src/arm64/renesas/rzg2l-smarc.dtsi
+++ b/src/arm64/renesas/rzg2l-smarc.dtsi
@@ -40,17 +40,7 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			dsi0_in: endpoint {
-			};
-		};
-
 		port@1 {
-			reg = <1>;
 			dsi0_out: endpoint {
 				data-lanes = <1 2 3 4>;
 				remote-endpoint = <&adv7535_in>;
@@ -59,6 +49,10 @@
 	};
 };
 
+&du {
+	status = "okay";
+};
+
 &i2c1 {
 	adv7535: hdmi@3d {
 		compatible = "adi,adv7535";
diff --git a/src/arm64/renesas/rzg2lc-smarc.dtsi b/src/arm64/renesas/rzg2lc-smarc.dtsi
index 859bc8745e..f21508640b 100644
--- a/src/arm64/renesas/rzg2lc-smarc.dtsi
+++ b/src/arm64/renesas/rzg2lc-smarc.dtsi
@@ -56,17 +56,7 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			dsi0_in: endpoint {
-			};
-		};
-
 		port@1 {
-			reg = <1>;
 			dsi0_out: endpoint {
 				data-lanes = <1 2 3 4>;
 				remote-endpoint = <&adv7535_in>;
@@ -75,6 +65,10 @@
 	};
 };
 
+&du {
+	status = "okay";
+};
+
 &i2c1 {
 	adv7535: hdmi@3d {
 		compatible = "adi,adv7535";
diff --git a/src/arm64/renesas/rzg3s-smarc-som.dtsi b/src/arm64/renesas/rzg3s-smarc-som.dtsi
index f062d4ad78..acac4666ae 100644
--- a/src/arm64/renesas/rzg3s-smarc-som.dtsi
+++ b/src/arm64/renesas/rzg3s-smarc-som.dtsi
@@ -193,12 +193,14 @@
 #endif
 
 &pinctrl {
+#if SW_CONFIG3 == SW_ON
 	eth0-phy-irq-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>;
 		input;
 		line-name = "eth0-phy-irq";
 	};
+#endif
 
 	eth0_pins: eth0 {
 		txc {
@@ -234,12 +236,14 @@
 		};
 	};
 
+#if SW_CONFIG3 == SW_ON
 	eth1-phy-irq-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>;
 		input;
 		line-name = "eth1-phy-irq";
 	};
+#endif
 
 	eth1_pins: eth1 {
 		txc {
@@ -336,3 +340,8 @@
 		};
 	};
 };
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/src/arm64/renesas/rzg3s-smarc.dtsi b/src/arm64/renesas/rzg3s-smarc.dtsi
index 2145201372..deb2ad37bb 100644
--- a/src/arm64/renesas/rzg3s-smarc.dtsi
+++ b/src/arm64/renesas/rzg3s-smarc.dtsi
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
 / {
@@ -14,6 +15,37 @@
 		mmc1 = &sdhi1;
 	};
 
+	keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			interrupts = <RZG2L_GPIO(18, 0) IRQ_TYPE_EDGE_FALLING>;
+			interrupt-parent = <&pinctrl>;
+			linux,code = <KEY_1>;
+			label = "USER_SW1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			interrupts = <RZG2L_GPIO(0, 1) IRQ_TYPE_EDGE_FALLING>;
+			interrupt-parent = <&pinctrl>;
+			linux,code = <KEY_2>;
+			label = "USER_SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			interrupts = <RZG2L_GPIO(0, 3) IRQ_TYPE_EDGE_FALLING>;
+			interrupt-parent = <&pinctrl>;
+			linux,code = <KEY_3>;
+			label = "USER_SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
 	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHI1 Vcc";
@@ -35,6 +67,27 @@
 };
 
 &pinctrl {
+	key-1-gpio-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(18, 0) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "key-1-gpio-irq";
+	};
+
+	key-2-gpio-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "key-2-gpio-irq";
+	};
+
+	key-3-gpio-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "key-3-gpio-irq";
+	};
+
 	scif0_pins: scif0 {
 		pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */
 			 <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
diff --git a/src/arm64/renesas/ulcb-kf.dtsi b/src/arm64/renesas/ulcb-kf.dtsi
index 50de17e4fb..431b37bf56 100644
--- a/src/arm64/renesas/ulcb-kf.dtsi
+++ b/src/arm64/renesas/ulcb-kf.dtsi
@@ -32,39 +32,40 @@
 		};
 	};
 
-	accel_3v3: regulator-acc-3v3 {
+	reg_t1p8v: regulator-t1p8v {
 		compatible = "regulator-fixed";
-		regulator-name = "accel-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	hdmi_1v8: regulator-hdmi-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-1v8";
+		regulator-name = "T1.8V";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
-	hdmi_3v3: regulator-hdmi-3v3 {
+	pcie_1v5: regulator-pcie-1v5 {
 		compatible = "regulator-fixed";
-		regulator-name = "hdmi-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+		regulator-name = "pcie-1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio_exp_77 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
-	snd_3p3v: regulator-snd_3p3v {
+	pcie_3v3: regulator-pcie-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "snd-3.3v";
+		regulator-name = "pcie-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_exp_77 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
-	snd_vcc5v: regulator-snd_vcc5v {
+	reg_5v: regulator-5v {
 		compatible = "regulator-fixed";
-		regulator-name = "snd-vcc5v";
+		regulator-name = "fixed-5V";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	wlan_en: regulator-wlan_en {
@@ -157,11 +158,11 @@
 
 				pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
 
-				avdd-supply = <&hdmi_1v8>;
-				dvdd-supply = <&hdmi_1v8>;
-				pvdd-supply = <&hdmi_1v8>;
-				dvdd-3v-supply = <&hdmi_3v3>;
-				bgvdd-supply = <&hdmi_1v8>;
+				avdd-supply = <&reg_t1p8v>;
+				dvdd-supply = <&reg_t1p8v>;
+				pvdd-supply = <&reg_t1p8v>;
+				dvdd-3v-supply = <&reg_3p3v>;
+				bgvdd-supply = <&reg_t1p8v>;
 
 				adi,input-depth = <8>;
 				adi,input-colorspace = "rgb";
@@ -198,8 +199,8 @@
 				compatible = "st,lsm9ds0-imu";
 				reg = <0x1d>;
 
-				vdd-supply = <&accel_3v3>;
-				vddio-supply = <&accel_3v3>;
+				vdd-supply = <&reg_3p3v>;
+				vddio-supply = <&reg_3p3v>;
 			};
 
 			pcm3168a: audio-codec@44 {
@@ -209,20 +210,20 @@
 				clocks = <&clksndsel>;
 				clock-names = "scki";
 
-				VDD1-supply = <&snd_3p3v>;
-				VDD2-supply = <&snd_3p3v>;
-				VCCAD1-supply = <&snd_vcc5v>;
-				VCCAD2-supply = <&snd_vcc5v>;
-				VCCDA1-supply = <&snd_vcc5v>;
-				VCCDA2-supply = <&snd_vcc5v>;
+				VDD1-supply = <&reg_3p3v>;
+				VDD2-supply = <&reg_3p3v>;
+				VCCAD1-supply = <&reg_5v>;
+				VCCAD2-supply = <&reg_5v>;
+				VCCDA1-supply = <&reg_5v>;
+				VCCDA2-supply = <&reg_5v>;
 			};
 
 			gyroscope@6b {
 				compatible = "st,lsm9ds0-gyro";
 				reg = <0x6b>;
 
-				vdd-supply = <&accel_3v3>;
-				vddio-supply = <&accel_3v3>;
+				vdd-supply = <&reg_3p3v>;
+				vddio-supply = <&reg_3p3v>;
 			};
 		};
 	};
@@ -348,6 +349,9 @@
 
 &pciec1 {
 	status = "okay";
+
+	vpcie1v5-supply = <&pcie_1v5>;
+	vpcie3v3-supply = <&pcie_3v3>;
 };
 
 &pfc {
@@ -417,6 +421,13 @@
 	pinctrl-names = "default";
 
 	status = "okay";
+
+	gnss {
+		compatible = "u-blox,neo-m8";
+		reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3p3v>;
+		current-speed = <9600>;
+	};
 };
 
 &sdhi3 {
diff --git a/src/arm64/renesas/white-hawk-common.dtsi b/src/arm64/renesas/white-hawk-common.dtsi
new file mode 100644
index 0000000000..c99086edad
--- /dev/null
+++ b/src/arm64/renesas/white-hawk-common.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the common parts shared by the White Hawk BreakOut
+ * and White Hawk Single boards
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include "white-hawk-csi-dsi.dtsi"
+#include "white-hawk-ethernet.dtsi"
+
+/ {
+	can_transceiver0: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+		phys = <&can_transceiver0>;
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+};
diff --git a/src/arm64/renesas/white-hawk-cpu-common.dtsi b/src/arm64/renesas/white-hawk-cpu-common.dtsi
new file mode 100644
index 0000000000..8ac17370ff
--- /dev/null
+++ b/src/arm64/renesas/white-hawk-cpu-common.dtsi
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the common parts shared by the White Hawk CPU and
+ * White Hawk Single boards
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &avb0;
+		serial0 = &hscif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW47";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW48";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW49";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+		};
+
+		led-2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+		};
+
+		led-3 {
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander_a: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data";
+		function = "hscif0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_0", "GP_5_1", "GP_5_2";
+		bias-pull-up;
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/src/arm64/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/src/arm64/renesas/white-hawk-csi-dsi.dtsi
similarity index 97%
rename from src/arm64/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
rename to src/arm64/renesas/white-hawk-csi-dsi.dtsi
index f8537f7ea4..3006b0a64f 100644
--- a/src/arm64/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
+++ b/src/arm64/renesas/white-hawk-csi-dsi.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board
+ * Device Tree Source for the White Hawk CSI/DSI sub-board
  *
  * Copyright (C) 2022 Glider bv
  */
diff --git a/src/arm64/renesas/r8a779g0-white-hawk-ethernet.dtsi b/src/arm64/renesas/white-hawk-ethernet.dtsi
similarity index 76%
rename from src/arm64/renesas/r8a779g0-white-hawk-ethernet.dtsi
rename to src/arm64/renesas/white-hawk-ethernet.dtsi
index 4f411f95c6..a218fda337 100644
--- a/src/arm64/renesas/r8a779g0-white-hawk-ethernet.dtsi
+++ b/src/arm64/renesas/white-hawk-ethernet.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1)
+ * Device Tree Source for the White Hawk RAVB/Ethernet(1000Base-T1)
  * sub-board
  *
  * Copyright (C) 2022 Glider bv
diff --git a/src/arm64/rockchip/px30-ringneck-haikou.dts b/src/arm64/rockchip/px30-ringneck-haikou.dts
index 16798eb770..ae398acdcf 100644
--- a/src/arm64/rockchip/px30-ringneck-haikou.dts
+++ b/src/arm64/rockchip/px30-ringneck-haikou.dts
@@ -227,6 +227,7 @@
 
 &uart5 {
 	pinctrl-0 = <&uart5_xfer>;
+	rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/src/arm64/rockchip/px30-ringneck.dtsi b/src/arm64/rockchip/px30-ringneck.dtsi
index 1239775583..bb1aea82e6 100644
--- a/src/arm64/rockchip/px30-ringneck.dtsi
+++ b/src/arm64/rockchip/px30-ringneck.dtsi
@@ -347,6 +347,12 @@
 	};
 };
 
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8>;
 	status = "okay";
diff --git a/src/arm64/rockchip/rk3328-rock-pi-e.dts b/src/arm64/rockchip/rk3328-rock-pi-e.dts
index 3cda6c627b..f09d60bbe6 100644
--- a/src/arm64/rockchip/rk3328-rock-pi-e.dts
+++ b/src/arm64/rockchip/rk3328-rock-pi-e.dts
@@ -148,7 +148,7 @@
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 	clock_in_out = "input";
-	phy-handle = <&rtl8211e>;
+	phy-handle = <&rtl8211>;
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_io>;
 	pinctrl-names = "default";
@@ -165,7 +165,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: ethernet-phy@1 {
+		rtl8211: ethernet-phy@1 {
 			reg = <1>;
 			pinctrl-0 = <&eth_phy_int_pin>, <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
diff --git a/src/arm64/rockchip/rk3328.dtsi b/src/arm64/rockchip/rk3328.dtsi
index 7b4c15c4a9..b6f045069e 100644
--- a/src/arm64/rockchip/rk3328.dtsi
+++ b/src/arm64/rockchip/rk3328.dtsi
@@ -744,11 +744,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/src/arm64/rockchip/rk3399-gru-scarlet.dtsi
index 5846a11f0e..d5e035823e 100644
--- a/src/arm64/rockchip/rk3399-gru-scarlet.dtsi
+++ b/src/arm64/rockchip/rk3399-gru-scarlet.dtsi
@@ -663,7 +663,7 @@ camera: &i2c7 {
 			port@1 {
 				reg = <1>;
 
-				mipi1_in_panel: endpoint@1 {
+				mipi1_in_panel: endpoint {
 					remote-endpoint = <&mipi1_out_panel>;
 				};
 			};
@@ -689,7 +689,6 @@ camera: &i2c7 {
 	ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 
 	/* PERST# asserted in S3 */
-	pcie-reset-suspend = <1>;
 
 	vpcie3v3-supply = <&wlan_3v3>;
 	vpcie1v8-supply = <&pp1800_pcie>;
diff --git a/src/arm64/rockchip/rk3399-kobol-helios64.dts b/src/arm64/rockchip/rk3399-kobol-helios64.dts
index 9e3aec4440..9586bb12a5 100644
--- a/src/arm64/rockchip/rk3399-kobol-helios64.dts
+++ b/src/arm64/rockchip/rk3399-kobol-helios64.dts
@@ -22,9 +22,6 @@
 		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
-		spi1 = &spi1;
-		spi2 = &spi2;
-		spi5 = &spi5;
 	};
 
 	avdd_0v9_s0: avdd-0v9-s0 {
@@ -614,7 +611,7 @@
 				#size-cells = <0>;
 
 				interface@0 {	/* interface 0 of configuration 1 */
-					compatible = "usbbda,8156.config1.0";
+					compatible = "usbifbda,8156.config1.0";
 					reg = <0 1>;
 				};
 			};
diff --git a/src/arm64/rockchip/rk3399-orangepi.dts b/src/arm64/rockchip/rk3399-orangepi.dts
index e7551449e7..e26e2d8627 100644
--- a/src/arm64/rockchip/rk3399-orangepi.dts
+++ b/src/arm64/rockchip/rk3399-orangepi.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "Orange Pi RK3399 Board";
-	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+	compatible = "xunlong,rk3399-orangepi", "rockchip,rk3399";
 
 	aliases {
 		ethernet0 = &gmac;
diff --git a/src/arm64/rockchip/rk3399-pinebook-pro.dts b/src/arm64/rockchip/rk3399-pinebook-pro.dts
index 054c6a4d1a..294eb2de26 100644
--- a/src/arm64/rockchip/rk3399-pinebook-pro.dts
+++ b/src/arm64/rockchip/rk3399-pinebook-pro.dts
@@ -779,7 +779,6 @@
 };
 
 &pcie0 {
-	bus-scan-delay-ms = <1000>;
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
diff --git a/src/arm64/rockchip/rk3399-puma-haikou.dts b/src/arm64/rockchip/rk3399-puma-haikou.dts
index 18a98c4648..f6f1594657 100644
--- a/src/arm64/rockchip/rk3399-puma-haikou.dts
+++ b/src/arm64/rockchip/rk3399-puma-haikou.dts
@@ -194,6 +194,8 @@
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie3v3-supply = <&vcc3v3_baseboard>;
+	vpcie12v-supply = <&dc_12v>;
 	status = "okay";
 };
 
@@ -273,11 +275,12 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };
 
 &uart2 {
+	rts-gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/src/arm64/rockchip/rk3399-puma.dtsi b/src/arm64/rockchip/rk3399-puma.dtsi
index c08e69391c..ccbe3a7a1d 100644
--- a/src/arm64/rockchip/rk3399-puma.dtsi
+++ b/src/arm64/rockchip/rk3399-puma.dtsi
@@ -79,6 +79,26 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	vcca_0v9: vcca-0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcca_1v8: vcca-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -416,16 +436,28 @@
 	gpio1830-supply = <&vcc_1v8>;
 };
 
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_1v8>;
+&pcie0 {
+	/* PCIe PHY supplies */
+	vpcie0v9-supply = <&vcca_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
 };
 
-&pwm2 {
-	status = "okay";
+&pcie_clkreqn_cpm {
+	rockchip,pins =
+		<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&q7_thermal_pin>;
+
+	gpios {
+		q7_thermal_pin: q7-thermal-pin {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	i2c8 {
 		i2c8_xfer_a: i2c8-xfer {
 			rockchip,pins =
@@ -458,11 +490,20 @@
 	usb3 {
 		usb3_id: usb3-id {
 			rockchip,pins =
-			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };
 
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
 &sdhci {
 	/*
 	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
diff --git a/src/arm64/rockchip/rk3399-rock-pi-4a.dts b/src/arm64/rockchip/rk3399-rock-pi-4a.dts
index d5df8939a6..c68f45849c 100644
--- a/src/arm64/rockchip/rk3399-rock-pi-4a.dts
+++ b/src/arm64/rockchip/rk3399-rock-pi-4a.dts
@@ -19,6 +19,6 @@
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <108000000>;
 	};
 };
diff --git a/src/arm64/rockchip/rk3399-rock-pi-4b.dts b/src/arm64/rockchip/rk3399-rock-pi-4b.dts
index bee6d75883..6ea3180e57 100644
--- a/src/arm64/rockchip/rk3399-rock-pi-4b.dts
+++ b/src/arm64/rockchip/rk3399-rock-pi-4b.dts
@@ -37,7 +37,7 @@
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <108000000>;
 	};
 };
 
diff --git a/src/arm64/rockchip/rk3399-rock-pi-4c.dts b/src/arm64/rockchip/rk3399-rock-pi-4c.dts
index de2ebe4cb4..5274938bf1 100644
--- a/src/arm64/rockchip/rk3399-rock-pi-4c.dts
+++ b/src/arm64/rockchip/rk3399-rock-pi-4c.dts
@@ -49,7 +49,7 @@
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <108000000>;
 	};
 };
 
diff --git a/src/arm64/rockchip/rk3399.dtsi b/src/arm64/rockchip/rk3399.dtsi
index 6e12c5a920..9d5f5b083e 100644
--- a/src/arm64/rockchip/rk3399.dtsi
+++ b/src/arm64/rockchip/rk3399.dtsi
@@ -38,6 +38,12 @@
 		serial2 = &uart2;
 		serial3 = &uart3;
 		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
 	};
 
 	cpus {
@@ -45,7 +51,7 @@
 		#size-cells = <0>;
 
 		cpu-map {
-			cluster0 {
+			cluster0 {	/* Cortex-A53 */
 				core0 {
 					cpu = <&cpu_l0>;
 				};
@@ -60,7 +66,7 @@
 				};
 			};
 
-			cluster1 {
+			cluster1 {	/* Cortex-A72 */
 				core0 {
 					cpu = <&cpu_b0>;
 				};
@@ -80,6 +86,13 @@
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu_l1: cpu@1 {
@@ -92,6 +105,13 @@
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -104,6 +124,13 @@
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -116,6 +143,13 @@
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -128,6 +162,13 @@
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b>;
 
 			thermal-idle {
 				#cooling-cells = <2>;
@@ -146,6 +187,13 @@
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b>;
 
 			thermal-idle {
 				#cooling-cells = <2>;
@@ -154,6 +202,24 @@
 			};
 		};
 
+		l2_cache_l: l2-cache-cluster0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+
 		idle-states {
 			entry-method = "psci";
 
@@ -1956,6 +2022,7 @@
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1964,13 +2031,16 @@
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1983,6 +2053,10 @@
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/src/arm64/rockchip/rk3566-anbernic-rg-arc-d.dts b/src/arm64/rockchip/rk3566-anbernic-rg-arc-d.dts
new file mode 100644
index 0000000000..ab83e8a616
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-anbernic-rg-arc-d.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg-arc.dtsi"
+
+/ {
+	model = "Anbernic RG ARC-D";
+	compatible = "anbernic,rg-arc-d", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt927";
+		reg = <0x14>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&touch_int>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-y;
+		touchscreen-size-x = <640>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&pinctrl {
+	touchscreen {
+		touch_int: touch_int {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3566-anbernic-rg-arc-s.dts b/src/arm64/rockchip/rk3566-anbernic-rg-arc-s.dts
new file mode 100644
index 0000000000..6264a8c78d
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-anbernic-rg-arc-s.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg-arc.dtsi"
+
+/ {
+	model = "Anbernic RG ARC-S";
+	compatible = "anbernic,rg-arc-s", "rockchip,rk3566";
+
+	aliases {
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-anbernic-rg-arc.dtsi b/src/arm64/rockchip/rk3566-anbernic-rg-arc.dtsi
new file mode 100644
index 0000000000..a4a60e4a53
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-anbernic-rg-arc.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =	<4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <128000000>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "anbernic,rg-arc-panel", "sitronix,st7701";
+		reg = <0>;
+		backlight = <&backlight>;
+		IOVCC-supply = <&vcc3v3_lcd0_n>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+		rotation = <90>;
+		VCC-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+/*
+ * Device uses a non-standard six button layout for a gamepad with X,
+ * Y, and Z on the top row of buttons and A, B, and C under the bottom
+ * row.
+ */
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+		label = "A";
+		linux,code = <BTN_A>;
+	};
+
+	button-b {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "B";
+		linux,code = <BTN_B>;
+	};
+
+	button-c {
+		gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+		label = "C";
+		linux,code = <BTN_C>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-r1 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-x {
+		gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		label = "X";
+		linux,code = <BTN_X>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "Y";
+		linux,code = <BTN_Y>;
+	};
+
+	button-z {
+		gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		label = "Z";
+		linux,code = <BTN_Z>;
+	};
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi b/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi
index 2a2821f4c5..63a18ff36c 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi
+++ b/src/arm64/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -8,11 +8,73 @@
 #include "rk3566-anbernic-rgxx3.dtsi"
 
 / {
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		power-supply = <&vcc_sys>;
 		pwms = <&pwm4 0 25000 0>;
 	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
 };
 
 &cru {
@@ -83,6 +145,18 @@
 		linux,code = <BTN_DPAD_RIGHT>;
 	};
 
+	button-thumbl {
+		gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		label = "THUMBL";
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+		label = "THUMBR";
+		linux,code = <BTN_THUMBR>;
+	};
+
 	button-y {
 		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
 		label = "WEST";
diff --git a/src/arm64/rockchip/rk3566-anbernic-rg503.dts b/src/arm64/rockchip/rk3566-anbernic-rg503.dts
index c763c7f3b1..94e6dd61a2 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rg503.dts
+++ b/src/arm64/rockchip/rk3566-anbernic-rg503.dts
@@ -17,6 +17,61 @@
 		mmc2 = &sdmmc2;
 	};
 
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3472000>;
@@ -36,6 +91,13 @@
 					<3400000 0>;
 	};
 
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
 	gpio_spi: spi {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -174,6 +236,18 @@
 		linux,code = <BTN_DPAD_RIGHT>;
 	};
 
+	button-thumbl {
+		gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		label = "THUMBL";
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+		label = "THUMBR";
+		linux,code = <BTN_THUMBR>;
+	};
+
 	button-y {
 		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
 		label = "WEST";
diff --git a/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi b/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
index 8cbf3d9a4f..18b8c2e7be 100644
--- a/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -14,51 +14,6 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
-	adc-joystick {
-		compatible = "adc-joystick";
-		io-channels = <&adc_mux 0>,
-			      <&adc_mux 1>,
-			      <&adc_mux 2>,
-			      <&adc_mux 3>;
-		pinctrl-0 = <&joy_mux_en>;
-		pinctrl-names = "default";
-		poll-interval = <60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		axis@0 {
-			reg = <0>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <1023 15>;
-			linux,code = <ABS_X>;
-		};
-
-		axis@1 {
-			reg = <1>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <15 1023>;
-			linux,code = <ABS_RX>;
-		};
-
-		axis@2 {
-			reg = <2>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <15 1023>;
-			linux,code = <ABS_Y>;
-		};
-
-		axis@3 {
-			reg = <3>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <1023 15>;
-			linux,code = <ABS_RY>;
-		};
-	};
-
 	adc_keys: adc-keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
@@ -77,16 +32,6 @@
 		};
 	};
 
-	adc_mux: adc-mux {
-		compatible = "io-channel-mux";
-		channels = "left_x", "right_x", "left_y", "right_y";
-		#io-channel-cells = <1>;
-		io-channels = <&saradc 3>;
-		io-channel-names = "parent";
-		mux-controls = <&gpio_mux>;
-		settle-time-us = <100>;
-	};
-
 	gpio_keys_control: gpio-keys-control {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&btn_pins_ctrl>;
@@ -128,18 +73,6 @@
 			linux,code = <BTN_START>;
 		};
 
-		button-thumbl {
-			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "THUMBL";
-			linux,code = <BTN_THUMBL>;
-		};
-
-		button-thumbr {
-			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "THUMBR";
-			linux,code = <BTN_THUMBR>;
-		};
-
 		button-up {
 			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
 			label = "DPAD-UP";
@@ -172,13 +105,6 @@
 		};
 	};
 
-	gpio_mux: mux-controller {
-		compatible = "gpio-mux";
-		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
-			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
-		#mux-control-cells = <0>;
-	};
-
 	hdmi-con {
 		compatible = "hdmi-connector";
 		ddc-i2c-bus = <&i2c5>;
diff --git a/src/arm64/rockchip/rk3566-lubancat-1.dts b/src/arm64/rockchip/rk3566-lubancat-1.dts
index 6ecdf5d283..c1194d1e43 100644
--- a/src/arm64/rockchip/rk3566-lubancat-1.dts
+++ b/src/arm64/rockchip/rk3566-lubancat-1.dts
@@ -447,7 +447,6 @@
 
 &pcie2x1 {
 	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-	disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };
diff --git a/src/arm64/rockchip/rk3566-pinetab2-v0.1.dts b/src/arm64/rockchip/rk3566-pinetab2-v0.1.dts
new file mode 100644
index 0000000000..5fe6ca5da9
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-pinetab2-v0.1.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinetab2.dtsi"
+
+/ {
+	model = "Pine64 PineTab2 v0.1";
+	compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566";
+};
+
+&lcd {
+	reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+
+&pinctrl {
+	lcd0 {
+		lcd0_rst_l: lcd0-rst-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc1 {
+	vmmc-supply = <&vcc3v3_sys>;
+};
diff --git a/src/arm64/rockchip/rk3566-pinetab2-v2.0.dts b/src/arm64/rockchip/rk3566-pinetab2-v2.0.dts
new file mode 100644
index 0000000000..9349541cbb
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-pinetab2-v2.0.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinetab2.dtsi"
+
+/ {
+	model = "Pine64 PineTab2 v2.0";
+	compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566";
+};
+
+&gpio_keys {
+	pinctrl-0 = <&kb_id_det>, <&hall_int_l>;
+
+	event-hall-sensor {
+		debounce-interval = <20>;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "Hall Sensor";
+		linux,code = <SW_LID>;
+		linux,input-type = <EV_SW>;
+		wakeup-event-action = <EV_ACT_DEASSERTED>;
+		wakeup-source;
+	};
+};
+
+&lcd {
+	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
+};
+
+&pinctrl {
+	lcd0 {
+		lcd0_rst_l: lcd0-rst-l {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hall {
+		hall_int_l: hall-int-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc1 {
+	vmmc-supply = <&vcc_sys>;
+};
diff --git a/src/arm64/rockchip/rk3566-pinetab2.dtsi b/src/arm64/rockchip/rk3566-pinetab2.dtsi
new file mode 100644
index 0000000000..db40281eaf
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-pinetab2.dtsi
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3566.dtsi"
+
+/ {
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <25>;
+
+		button-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <297500>;
+		};
+
+		button-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 25000 0>;
+		brightness-levels = <20 220>;
+		num-interpolated-steps = <200>;
+		default-brightness-level = <100>;
+		power-supply = <&vcc_sys>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <6000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>,
+				       <4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>,
+				       <3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>,
+				       <3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>,
+				       <3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>,
+				       <3400000 0>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&kb_id_det>;
+
+		tablet-mode-switch {
+			debounce-interval = <20>;
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+			label = "Tablet Mode";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	led-0 {
+		compatible = "regulator-led";
+		vled-supply = <&vcc5v0_flashled>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_FLASH;
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_l>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+
+		simple-audio-card,routing =
+			"MICR", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amplifier OUTL",
+			"Internal Speakers", "Speaker Amplifier OUTR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spk_ctl>;
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&vcc_bat>;
+	};
+
+	vcc_3v3: vcc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren_h>;
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc3v3_sd: vcc3v3-sd-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren_l>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_flashled: vcc5v0-flashled-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_led_en_h>;
+		regulator-name = "vcc5v0_flashled";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_midu>;
+	};
+
+	vcc5v0_usb_host0: vcc5v0-usb-host0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren1_h>;
+		regulator-name = "vcc5v0_usb_host0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_midu>;
+	};
+
+	vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren2_h>;
+		regulator-name = "vcc5v0_usb_host2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_midu>;
+	};
+
+	vcc_bat: vcc-bat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_bat";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vdd1v2_dvp: vdd1v2-dvp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd1v2_dvp";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>;
+	assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	clock-master;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: panel@0 {
+		compatible = "boe,th101mb31ig002-28a";
+		reg = <0>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		rotation = <90>;
+		power-supply = <&vcc_3v3>;
+
+		port@0 {
+			panel_in_dsi: endpoint@0 {
+				remote-endpoint = <&dsi0_out_con>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	dsi0_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_con: endpoint {
+		remote-endpoint = <&panel_in_dsi>;
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_npu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9_p>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc5v_midu>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu_npu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc3v3_sys";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdda_0v9_p: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9_p";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v_midu: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vbus: OTG_SWITCH {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>;
+		AVDD28-supply = <&vcc3v3_pmu>;
+		VDDIO-supply = <&vcca1v8_pmu>;
+		irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+
+	vcm@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		vcc-supply = <&vcc1v8_dvp>;
+	};
+
+	camera@36 {
+		compatible = "ovti,ov5648";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>;
+
+		clocks = <&cru CLK_CIF_OUT>;
+		assigned-clocks = <&cru CLK_CIF_OUT>;
+		assigned-clock-rates = <24000000>;
+
+		avdd-supply = <&vcc2v8_dvp>;
+		dvdd-supply = <&vdd1v2_dvp>;
+		dovdd-supply = <&vcc1v8_dvp>;
+		powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
+
+		port {
+			endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <0>;
+				link-frequencies = /bits/ 64 <210000000 168000000>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "silan,sc7a20";
+		reg = <0x18>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int_l>;
+		st,drdy-int-pin = <1>;
+		vdd-supply = <&vcc_1v8>;
+		vddio-supply = <&vcc_1v8>;
+		mount-matrix = "1", "0", "0",
+			       "0", "0", "1",
+			       "0", "1", "0";
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	camerab {
+		camerab_pdn_l: camerab-pdn-l {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		camerab_rst_l: camerab-rst-l {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cameraf {
+		cameraf_pdn_l: cameraf-pdn-l {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cameraf_rst_l: cameraf-rst-l {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		flash_led_en_h: flash-led-en-h {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		fspi_dual_io_pins: fspi-dual-io-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	gsensor {
+		gsensor_int_l: gsensor-int-l {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	kb {
+		kb_id_det: kb-id-det {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_pwren_h: lcd-pwren-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwren_h: pcie-pwren-h {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwren_l: sdmmc-pwren-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_det_l: hp-det-l {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		spk_ctl: spk-ctl {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tp {
+		tp_int_l_pmuio2: tp-int-l-pmuio2 {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		tp_rst_l_pmuio2: tp-rst-l-pmuio2 {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usbcc_int_l: usbcc-int-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_host_pwren1_h: usb-host-pwren1-h {
+			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_host_pwren2_h: usb-host-pwren2-h {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		host_wake_wl: host-wake-wl {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8
+		     &emmc_clk
+		     &emmc_cmd
+		     &emmc_datastrobe
+		     &emmc_rstnout>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4
+		     &sdmmc0_clk
+		     &sdmmc0_cmd
+		     &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4
+		     &sdmmc1_cmd
+		     &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspi_dual_io_pins>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host0>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host2>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rgb10max3.dts b/src/arm64/rockchip/rk3566-powkiddy-rgb10max3.dts
new file mode 100644
index 0000000000..e5a474e681
--- /dev/null
+++ b/src/arm64/rockchip/rk3566-powkiddy-rgb10max3.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "Powkiddy RGB10MAX3";
+	compatible = "powkiddy,rgb10max3", "rockchip,rk3566";
+};
+
+&bluetooth {
+	compatible = "realtek,rtl8723ds-bt";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rgb10max3-panel";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
+		pinctrl-0 = <&lcd_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&green_led {
+	default-state = "on";
+	function = LED_FUNCTION_POWER;
+};
+
+&i2c0 {
+	vdd_cpu: regulator@40 {
+		compatible = "fcs,fan53555";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&leds {
+	amber_led: led-2 {
+		color = <LED_COLOR_ID_AMBER>;
+		function = LED_FUNCTION_CHARGING;
+		max-brightness = <255>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&red_led {
+	default-state = "off";
+	function = LED_FUNCTION_STATUS;
+};
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts b/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
index 0ac64f043b..1f567a14ac 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
+++ b/src/arm64/rockchip/rk3566-powkiddy-rgb30.dts
@@ -37,3 +37,21 @@
 		};
 	};
 };
+
+&i2c0 {
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
index ba32d0793d..bc9933d9e2 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
+++ b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dts
@@ -36,3 +36,21 @@
 		};
 	};
 };
+
+&i2c0 {
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
index 0fa8f06f94..3ab751a01c 100644
--- a/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
+++ b/src/arm64/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -614,22 +614,6 @@
 			rockchip,sleep-filter-current-microamp = <100000>;
 		};
 	};
-
-	vdd_cpu: regulator@1c {
-		compatible = "tcs,tcs4525";
-		reg = <0x1c>;
-		fcs,suspend-voltage-selector = <1>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1390000>;
-		regulator-name = "vdd_cpu";
-		regulator-ramp-delay = <2300>;
-		vin-supply = <&vcc_sys>;
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
 };
 
 &i2c5 {
@@ -805,7 +789,7 @@
 	uart-has-rtscts;
 	status = "okay";
 
-	bluetooth {
+	bluetooth: bluetooth {
 		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
 		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
diff --git a/src/arm64/rockchip/rk3568-bpi-r2-pro.dts b/src/arm64/rockchip/rk3568-bpi-r2-pro.dts
index f9127ddfbb..c87fad2c34 100644
--- a/src/arm64/rockchip/rk3568-bpi-r2-pro.dts
+++ b/src/arm64/rockchip/rk3568-bpi-r2-pro.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
-	compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
+	compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568";
 
 	aliases {
 		ethernet0 = &gmac0;
@@ -416,6 +416,8 @@
 
 			vccio_sd: LDO_REG5 {
 				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 
@@ -525,9 +527,9 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	switch@0 {
+	switch@1f {
 		compatible = "mediatek,mt7531";
-		reg = <0>;
+		reg = <0x1f>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/src/arm64/rockchip/rk3568-lubancat-2.dts b/src/arm64/rockchip/rk3568-lubancat-2.dts
index a8a4cc190e..a3112d5df2 100644
--- a/src/arm64/rockchip/rk3568-lubancat-2.dts
+++ b/src/arm64/rockchip/rk3568-lubancat-2.dts
@@ -523,7 +523,6 @@
 
 &pcie2x1 {
 	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
-	disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_mini_pcie>;
 	status = "okay";
 };
diff --git a/src/arm64/rockchip/rk3568-qnap-ts433.dts b/src/arm64/rockchip/rk3568-qnap-ts433.dts
new file mode 100644
index 0000000000..6a99816600
--- /dev/null
+++ b/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2024 Uwe Kleine-König
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Qnap TS-433-4G NAS System 4-Bay";
+	compatible = "qnap,ts433", "rockchip,rk3568";
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	rx_delay = <0x2f>;
+	tx_delay = <0x3c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "microcrystal,rv8263";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */
+	reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	status = "okay";
+};
+
+/*
+ * Pins available on CN3 connector at TTL voltage level (3V3).
+ * ,_  _.
+ * |1234|  1=TX 2=VCC
+ * `----'  3=RX 4=GND
+ */
+&uart2 {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk356x.dtsi b/src/arm64/rockchip/rk356x.dtsi
index c19c0f1b37..92f96ec013 100644
--- a/src/arm64/rockchip/rk356x.dtsi
+++ b/src/arm64/rockchip/rk356x.dtsi
@@ -597,6 +597,7 @@
 		compatible = "rockchip,rk3568-vpu";
 		reg = <0x0 0xfdea0000 0x0 0x800>;
 		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "hclk";
 		iommus = <&vdpu_mmu>;
@@ -1123,7 +1124,7 @@
 		dmas = <&dmac1 4>, <&dmac1 5>;
 		dma-names = "tx", "rx";
 		resets = <&cru SRST_M_I2S2_2CH>;
-		reset-names = "m";
+		reset-names = "tx-m";
 		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m0_sclktx
diff --git a/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi b/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
index cce1c8e835..94ecb9b4f9 100644
--- a/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
+++ b/src/arm64/rockchip/rk3588-coolpi-cm5.dtsi
@@ -216,9 +216,9 @@
 	pinctrl-0 = <&i2c7m0_xfer>;
 	status = "okay";
 
-	es8316: audio-codec@11 {
+	es8316: audio-codec@10 {
 		compatible = "everest,es8316";
-		reg = <0x11>;
+		reg = <0x10>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi b/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
new file mode 100644
index 0000000000..c0d4a15323
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-common.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_user: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_user_en>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&pinctrl {
+	leds {
+		led_user_en: led_user_en {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts
index be6a4f4f90..46d5e21d4d 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -6,18 +6,10 @@
 /dts-v1/;
 #include "rk3588.dtsi"
 #include "rk3588-edgeble-neu6a.dtsi"
+#include "rk3588-edgeble-neu6a-io.dtsi"
 
 / {
 	model = "Edgeble Neu6A IO Board";
 	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
 };
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
new file mode 100644
index 0000000000..963e880ccc
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-io.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie3x2: vcc3v3-pcie3x2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie3x2_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie3x2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie3x4: vcc3v3-pcie3x4-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie3x4_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie3x4";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+/* ETH */
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; /* PCIE20_1_PERST_L */
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* B-Key and E-Key */
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x2_rst>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
+	vpcie3v3-supply = <&vcc3v3_pcie3x2>;
+	status = "okay";
+};
+
+/* M-Key */
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x4_rst>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
+	vpcie3v3-supply = <&vcc3v3_pcie3x4>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3x2_rst: pcie3x2-rst {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3x2_vcc3v3_en: pcie3x2-vcc3v3-en {
+			rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3x4_rst: pcie3x4-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3x4_vcc3v3_en: pcie3x4-vcc3v3-en {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* FAN */
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart6 {
+	pinctrl-0 = <&uart6m0_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* RS485 */
+&uart7 {
+	pinctrl-0 = <&uart7m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB hub, which is powered by vcc5v0_sys */
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a-wifi.dtso b/src/arm64/rockchip/rk3588-edgeble-neu6a-wifi.dtso
new file mode 100644
index 0000000000..e9a3855e87
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a-wifi.dtso
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ *
+ * DT-overlay for Edgeble On-SoM WiFi6/BT M.2 1216 modules,
+ * - AW-XM548NF
+ * - Intel 8260D2W
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+&{/} {
+	vcc3v3_pcie2x1l1: vcc3v3-pcie2x1l1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; /* WIFI_3V3_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie2_1_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie2x1l1";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+/* WiFi6 */
+&pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_1_rst>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; /* PCIE20_2_WIFI_PERSTn */
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l1>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie2 {
+		pcie2_1_rst: pcie2-1-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_1_vcc3v3_en: pcie2-1-vcc-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi b/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi
index 727580aaa1..4c76a00b41 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6a.dtsi
@@ -3,29 +3,8 @@
  * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
  */
 
+#include "rk3588-edgeble-neu6a-common.dtsi"
+
 / {
 	compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588";
-
-	aliases {
-		mmc0 = &sdhci;
-	};
-
-	vcc12v_dcin: vcc12v-dcin-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	status = "okay";
 };
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts b/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts
index 070baeb634..0d6f1be69a 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -6,84 +6,10 @@
 /dts-v1/;
 #include "rk3588j.dtsi"
 #include "rk3588-edgeble-neu6b.dtsi"
+#include "rk3588-edgeble-neu6a-io.dtsi"
 
 / {
 	model = "Edgeble Neu6B IO Board";
 	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-};
-
-&combphy0_ps {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	hym8563: rtc@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <0>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		wakeup-source;
-	};
-};
-
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-/* FAN */
-&pwm2 {
-	pinctrl-0 = <&pwm2m1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	disable-wp;
-	no-sdio;
-	no-mmc;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
-	vqmmc-supply = <&vccio_sd_s0>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-0 = <&uart2m0_xfer>;
-	status = "okay";
-};
-
-/* RS232 */
-&uart6 {
-	pinctrl-0 = <&uart6m0_xfer>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-/* RS485 */
-&uart7 {
-	pinctrl-0 = <&uart7m2_xfer>;
-	pinctrl-names = "default";
-	status = "okay";
 };
diff --git a/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi b/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi
index 017559bba3..c4634bc09f 100644
--- a/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi
+++ b/src/arm64/rockchip/rk3588-edgeble-neu6b.dtsi
@@ -3,387 +3,8 @@
  * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
  */
 
+#include "rk3588-edgeble-neu6a-common.dtsi"
+
 / {
 	compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588";
-
-	aliases {
-		mmc0 = &sdhci;
-	};
-
-	vcc12v_dcin: vcc12v-dcin-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v1_nldo_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&sdhci {
-	bus-width = <8>;
-	no-sdio;
-	no-sd;
-	non-removable;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	status = "okay";
-};
-
-&spi2 {
-	status = "okay";
-	assigned-clocks = <&cru CLK_SPI2>;
-	assigned-clock-rates = <200000000>;
-	num-cs = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
-
-	pmic@0 {
-		compatible = "rockchip,rk806";
-		spi-max-frequency = <1000000>;
-		reg = <0x0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
-			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc5-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc5v0_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc_2v0_pldo_s3>;
-		vcc12-supply = <&vcc5v0_sys>;
-		vcc13-supply = <&vcc_1v1_nldo_s3>;
-		vcc14-supply = <&vcc_1v1_nldo_s3>;
-		vcca-supply = <&vcc5v0_sys>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs2_null: dvs2-null-pins {
-			pins = "gpio_pwrctrl2";
-			function = "pin_fun0";
-		};
-
-		rk806_dvs3_null: dvs3-null-pins {
-			pins = "gpio_pwrctrl3";
-			function = "pin_fun0";
-		};
-
-		regulators {
-			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
-				regulator-name = "vdd_gpu_s0";
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-				regulator-enable-ramp-delay = <400>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
-				regulator-name = "vdd_cpu_lit_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_log_s0: dcdc-reg3 {
-				regulator-name = "vdd_log_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <750000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
-				regulator-name = "vdd_vdenc_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <550000>;
-				regulator-max-microvolt = <950000>;
-				regulator-init-microvolt = <750000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_ddr_s0: dcdc-reg5 {
-				regulator-name = "vdd_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <900000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			vdd2_ddr_s3: dcdc-reg6 {
-				regulator-name = "vdd2_ddr_s3";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_2v0_pldo_s3: dcdc-reg7 {
-				regulator-name = "vdd_2v0_pldo_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <2000000>;
-				};
-			};
-
-			vcc_3v3_s3: dcdc-reg8 {
-				regulator-name = "vcc_3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vddq_ddr_s0: dcdc-reg9 {
-				regulator-name = "vddq_ddr_s0";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s3: dcdc-reg10 {
-				regulator-name = "vcc_1v8_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avcc_1v8_s0: pldo-reg1 {
-				regulator-name = "avcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v8_s0: pldo-reg2 {
-				regulator-name = "vcc_1v8_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			avdd_1v2_s0: pldo-reg3 {
-				regulator-name = "avdd_1v2_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v3_s0: pldo-reg4 {
-				regulator-name = "vcc_3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vccio_sd_s0: pldo-reg5 {
-				regulator-name = "vccio_sd_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-ramp-delay = <12500>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			pldo6_s3: pldo-reg6 {
-				regulator-name = "pldo6_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_0v75_s3: nldo-reg1 {
-				regulator-name = "vdd_0v75_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <750000>;
-				};
-			};
-
-			vdd_ddr_pll_s0: nldo-reg2 {
-				regulator-name = "vdd_ddr_pll_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <850000>;
-				};
-			};
-
-			avdd_0v75_s0: nldo-reg3 {
-				regulator-name = "avdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v85_s0: nldo-reg4 {
-				regulator-name = "vdd_0v85_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_0v75_s0: nldo-reg5 {
-				regulator-name = "vdd_0v75_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
 };
diff --git a/src/arm64/rockchip/rk3588-nanopc-t6.dts b/src/arm64/rockchip/rk3588-nanopc-t6.dts
index 997b516c25..ad8e36a339 100644
--- a/src/arm64/rockchip/rk3588-nanopc-t6.dts
+++ b/src/arm64/rockchip/rk3588-nanopc-t6.dts
@@ -159,6 +159,29 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-low;
+		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sd_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vdd_4g_3v3: vdd-4g-3v3-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pin_4g_lte_pwren>;
+		regulator-name = "vdd_4g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
 };
 
 &combphy0_ps {
@@ -504,6 +527,10 @@
 	};
 
 	usb {
+		pin_4g_lte_pwren: 4g-lte-pwren {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		typec5v_pwren: typec5v-pwren {
 			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -539,11 +566,12 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	no-mmc;
 	no-sdio;
 	sd-uhs-sdr104;
-	vmmc-supply = <&vcc_3v3_s3>;
+	vmmc-supply = <&vcc3v3_sd_s0>;
 	vqmmc-supply = <&vccio_sd_s0>;
 	status = "okay";
 };
@@ -884,6 +912,7 @@
 };
 
 &u2phy2_host {
+	phy-supply = <&vdd_4g_3v3>;
 	status = "okay";
 };
 
diff --git a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
index 3e660ff6cd..1a604429fb 100644
--- a/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
+++ b/src/arm64/rockchip/rk3588-orangepi-5-plus.dts
@@ -444,7 +444,6 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
@@ -486,6 +485,7 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
@@ -507,7 +507,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
diff --git a/src/arm64/rockchip/rk3588-quartzpro64.dts b/src/arm64/rockchip/rk3588-quartzpro64.dts
index 87a0abf95f..22bbfbe729 100644
--- a/src/arm64/rockchip/rk3588-quartzpro64.dts
+++ b/src/arm64/rockchip/rk3588-quartzpro64.dts
@@ -429,7 +429,6 @@
 &sdmmc {
 	bus-width = <4>;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
@@ -457,6 +456,7 @@
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc4v0_sys>;
 		vcc2-supply = <&vcc4v0_sys>;
diff --git a/src/arm64/rockchip/rk3588-rock-5b.dts b/src/arm64/rockchip/rk3588-rock-5b.dts
index a0e303c3a1..1fe8b2a0ed 100644
--- a/src/arm64/rockchip/rk3588-rock-5b.dts
+++ b/src/arm64/rockchip/rk3588-rock-5b.dts
@@ -58,6 +58,13 @@
 		#cooling-cells = <2>;
 	};
 
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-pcie-wlan";
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	};
+
 	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -371,7 +378,6 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
diff --git a/src/arm64/rockchip/rk3588-tiger-haikou.dts b/src/arm64/rockchip/rk3588-tiger-haikou.dts
new file mode 100644
index 0000000000..d672198c6b
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-tiger-haikou.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3588-tiger.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-Q7 SoM on Haikou devkit";
+	compatible = "tsd,rk3588-tiger-haikou", "tsd,rk3588-tiger", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&haikou_keys_pin>;
+
+		button-batlow-n {
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-slp-btn-n {
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wake-n {
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2s3-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,frame-master = <&sgtl5000_codec>;
+		simple-audio-card,bitclock-master = <&sgtl5000_codec>;
+
+		sgtl5000_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s3_2ch>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator  {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_low_noise: vcc3v3-low-noise-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_low_noise";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vddd_audio_1v6: vddd-audio-1v6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_audio_1v6";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		reg = <0x50>;
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		size = <128>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vcc3v3_low_noise>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+		VDDD-supply = <&vddd_audio_1v6>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2s3_2ch {
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	vpcie3v3-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&pinctrl {
+	haikou {
+		haikou_keys_pin: haikou-keys-pin {
+			rockchip,pins =
+				/* BATLOW# */
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* SLP_BTN# */
+				<4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* WAKE# */
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* LID_BTN */
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	/* while the same pin, sdmmc_det does not detect card changes */
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m2_xfer>;
+	status = "okay";
+};
+
+&uart5 {
+	rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* host0 on Q7_USB_P2, lower usb3 port */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+/* host0 on Q7_USB_P2, lower usb3 port */
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* host1 on Q7_USB_P3, usb2 port */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+/* host1 on Q7_USB_P3, usb2 port */
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* host2 on Q7_USB_P2, lower usb3 port */
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-tiger.dtsi b/src/arm64/rockchip/rk3588-tiger.dtsi
new file mode 100644
index 0000000000..1eb2543a5f
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-tiger.dtsi
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "tsd,rk3588-tiger", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		rtc0 = &rtc_twi;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+
+		/* Named LED1 on the board */
+		led-1 {
+			gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	/*
+	 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
+	 * clock generator.
+	 * The clock output is gated via the OE pin on the clock generator.
+	 * This is modeled as a fixed-clock plus a gpio-gate-clock.
+	 */
+	pcie_refclk_gen: pcie-refclk-gen-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};
+
+	pcie_refclk: pcie-refclk-clock {
+		compatible = "gpio-gate-clock";
+		clocks = <&pcie_refclk_gen>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_s3: vcc-1v2-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_1v2_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_rx_bus2
+		     &gmac0_tx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &eth0_pins
+		     &eth_reset>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 100000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1m0_xfer>;
+};
+
+&i2c1m0_xfer {
+	rockchip,pins =
+		/* i2c1_scl_m0 */
+		<0 RK_PB5 9 &pcfg_pull_none_drv_level_0>,
+		/* i2c1_sda_m0 */
+		<0 RK_PB6 9 &pcfg_pull_none_drv_level_0>;
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2m3_xfer>;
+	status = "okay";
+};
+
+&i2c2m3_xfer {
+	rockchip,pins =
+		/* i2c2_scl_m3 */
+		<1 RK_PC5 9 &pcfg_pull_none_drv_level_0>,
+		/* i2c2_sda_m3 */
+		<1 RK_PC4 9 &pcfg_pull_none_drv_level_0>;
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4m4_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+};
+
+&i2c5m1_xfer {
+	rockchip,pins =
+		/* i2c5_scl_m1 */
+		<4 RK_PB6 9 &pcfg_pull_none_drv_level_0>,
+		/* i2c5_sda_m1 */
+		<4 RK_PB7 9 &pcfg_pull_none_drv_level_0>;
+};
+
+&i2c6 {
+	/*
+	 * Mule-ATtiny can handle up to Fast mode Plus (1MHz) on I2C bus,
+	 * but SOC can handle only up to (400kHz).
+	 */
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c6m0_xfer {
+	rockchip,pins =
+		/* i2c6_scl_m0 */
+		<0 RK_PD0 9 &pcfg_pull_none_drv_level_0>,
+		/* i2c6_sda_m0 */
+		<0 RK_PC7 9 &pcfg_pull_none_drv_level_0>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c7m0_xfer {
+	rockchip,pins =
+		/* i2c7_scl_m0 */
+		<1 RK_PD0 9 &pcfg_pull_none_drv_level_0>,
+		/* i2c7_sda_m0 */
+		<1 RK_PD1 9 &pcfg_pull_none_drv_level_0>;
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@6 {
+		/* KSZ9031 or KSZ9131 */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x6>;
+		clocks = <&cru REFCLKO25M_ETH0_OUT>;
+	};
+};
+
+&pcie3x4 {
+	/*
+	 * The board has a gpio-controlled "pcie_refclk" generator,
+	 * so add it to the list of clocks.
+	 */
+	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+		 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+		 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
+		 <&pcie_refclk>;
+	clock-names = "aclk_mst", "aclk_slv",
+		      "aclk_dbi", "pclk",
+		      "aux", "pipe",
+		      "ref";
+	reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_reset: eth-reset {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
+	supports-cqe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <150000000>;
+	vqmmc-supply = <&vccio_sd_s0>;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0m1_cs0 &spi0m1_cs1 &spi0m3_pins>;
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vcc_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+/* Mule-ATtiny UPDI */
+&uart4 {
+	pinctrl-0 = <&uart4m2_xfer>;
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588-toybrick-x0.dts b/src/arm64/rockchip/rk3588-toybrick-x0.dts
new file mode 100644
index 0000000000..9090c5c99f
--- /dev/null
+++ b/src/arm64/rockchip/rk3588-toybrick-x0.dts
@@ -0,0 +1,688 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip Toybrick TB-RK3588X Board";
+	compatible = "rockchip,rk3588-toybrick-x0", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+
+		button-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <417000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <890000>;
+		};
+
+		button-escape {
+			label = "Escape";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1235000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	pcie20_avdd0v85: pcie20-avdd0v85-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie20_avdd0v85";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	pcie20_avdd1v8: pcie20-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie20_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	pcie30_avdd0v75: pcie30-avdd0v75-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v75";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-init-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588s-indiedroid-nova.dts b/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
index 3c22788868..ce8119cbb8 100644
--- a/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
+++ b/src/arm64/rockchip/rk3588s-indiedroid-nova.dts
@@ -141,6 +141,10 @@
 	status = "okay";
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_l0 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
@@ -842,3 +846,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588s-nanopi-r6c.dts b/src/arm64/rockchip/rk3588s-nanopi-r6c.dts
new file mode 100644
index 0000000000..497bbb5707
--- /dev/null
+++ b/src/arm64/rockchip/rk3588s-nanopi-r6c.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-nanopi-r6s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R6C";
+	compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
+};
+
+&lan2_led {
+	label = "user_led";
+};
diff --git a/src/arm64/rockchip/rk3588s-nanopi-r6s.dts b/src/arm64/rockchip/rk3588s-nanopi-r6s.dts
new file mode 100644
index 0000000000..4fa644ae51
--- /dev/null
+++ b/src/arm64/rockchip/rk3588s-nanopi-r6s.dts
@@ -0,0 +1,764 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R6S";
+	compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Maskrom";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1800>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key1_pin>;
+
+		button-user {
+			label = "User";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_led: led-0 {
+			label = "sys_led";
+			gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sys_led_pin>;
+		};
+
+		wan_led: led-1 {
+			label = "wan_led";
+			gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&wan_led_pin>;
+		};
+
+		lan1_led: led-2 {
+			label = "lan1_led";
+			gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lan1_led_pin>;
+		};
+
+		lan2_led: led-3 {
+			label = "lan2_led";
+			gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lan2_led_pin>;
+		};
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_3v3_s0: vcc-3v3-s0-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_s0_pwr>;
+		regulator-name = "vcc_3v3_sd_s0";
+		regulator-boot-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_pcie20";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vcc5v0_usb_otg0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_host_20: vcc5v0-host-20-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host20_en>;
+		regulator-name = "vcc5v0_host_20";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	tx_delay = <0x42>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l1 {
+	reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-key {
+		key1_pin: key1-pin {
+			rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		sys_led_pin: sys-led-pin {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins =
+				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan1_led_pin: lan1-led-pin {
+			rockchip,pins =
+				<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan2_led_pin: lan2-led-pin {
+			rockchip,pins =
+				<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sd_s0_pwr: sd-s0-pwr {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host20_en: vcc5v0-host20-en {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_sd_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			avdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "avdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "avdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host_20>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/src/arm64/rockchip/rk3588s-rock-5a.dts b/src/arm64/rockchip/rk3588s-rock-5a.dts
index 2002fd0221..00afb90d4e 100644
--- a/src/arm64/rockchip/rk3588s-rock-5a.dts
+++ b/src/arm64/rockchip/rk3588s-rock-5a.dts
@@ -366,7 +366,6 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;
diff --git a/src/arm64/rockchip/rk3588s.dtsi b/src/arm64/rockchip/rk3588s.dtsi
index 36b1b7acfe..87b83c87bd 100644
--- a/src/arm64/rockchip/rk3588s.dtsi
+++ b/src/arm64/rockchip/rk3588s.dtsi
@@ -519,6 +519,7 @@
 	vo1_grf: syscon@fd5a8000 {
 		compatible = "rockchip,rk3588-vo-grf", "syscon";
 		reg = <0x0 0xfd5a8000 0x0 0x100>;
+		clocks = <&cru PCLK_VO1GRF>;
 	};
 
 	php_grf: syscon@fd5b0000 {
@@ -586,6 +587,11 @@
 		};
 	};
 
+	hdptxphy0_grf: syscon@fd5e0000 {
+		compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
+		reg = <0x0 0xfd5e0000 0x0 0x100>;
+	};
+
 	ioc: syscon@fd5f0000 {
 		compatible = "rockchip,rk3588-ioc", "syscon";
 		reg = <0x0 0xfd5f0000 0x0 0x10000>;
@@ -1704,7 +1710,6 @@
 		dmas = <&dmac1 0>, <&dmac1 1>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m1_lrck
 			     &i2s2m1_sclk
@@ -1725,7 +1730,6 @@
 		dmas = <&dmac1 2>, <&dmac1 3>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s3_lrck
 			     &i2s3_sclk
@@ -2360,6 +2364,22 @@
 		#dma-cells = <1>;
 	};
 
+	hdptxphy_hdmi0: phy@fed60000 {
+		compatible = "rockchip,rk3588-hdptx-phy";
+		reg = <0x0 0xfed60000 0x0 0x2000>;
+		clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
+		clock-names = "ref", "apb";
+		#phy-cells = <0>;
+		resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
+			 <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
+			 <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>,
+			 <&cru SRST_HDPTX0_LCPLL>;
+		reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
+			      "lcpll";
+		rockchip,grf = <&hdptxphy0_grf>;
+		status = "disabled";
+	};
+
 	combphy0_ps: phy@fee00000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee00000 0x0 0x100>;
diff --git a/src/arm64/st/stm32mp251.dtsi b/src/arm64/st/stm32mp251.dtsi
index 96859d098e..5dd4f3580a 100644
--- a/src/arm64/st/stm32mp251.dtsi
+++ b/src/arm64/st/stm32mp251.dtsi
@@ -52,6 +52,18 @@
 			compatible = "fixed-clock";
 			clock-frequency = <200000000>;
 		};
+
+		ck_icn_p_vdec: ck-icn-p-vdec {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+
+		ck_icn_p_venc: ck-icn-p-venc {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
 	};
 
 	firmware {
diff --git a/src/arm64/st/stm32mp255.dtsi b/src/arm64/st/stm32mp255.dtsi
index e6fa596211..17f197c5b2 100644
--- a/src/arm64/st/stm32mp255.dtsi
+++ b/src/arm64/st/stm32mp255.dtsi
@@ -6,4 +6,21 @@
 #include "stm32mp253.dtsi"
 
 / {
+	soc@0 {
+		rifsc: rifsc-bus@42080000 {
+			vdec: vdec@480d0000 {
+				compatible = "st,stm32mp25-vdec";
+				reg = <0x480d0000 0x3c8>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_icn_p_vdec>;
+			};
+
+			venc: venc@480e0000 {
+				compatible = "st,stm32mp25-venc";
+				reg = <0x480e0000 0x800>;
+				interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_icn_ls_mcu>;
+			};
+		};
+	};
 };
diff --git a/src/arm64/tesla/fsd.dtsi b/src/arm64/tesla/fsd.dtsi
index aaffb50b8b..047a83cee6 100644
--- a/src/arm64/tesla/fsd.dtsi
+++ b/src/arm64/tesla/fsd.dtsi
@@ -601,6 +601,7 @@
 			clocks = <&clock_peric PERIC_PCLK_UART0>,
 				 <&clock_peric PERIC_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <64>;
 			status = "disabled";
 		};
 
@@ -613,6 +614,7 @@
 			clocks = <&clock_peric PERIC_PCLK_UART1>,
 				 <&clock_peric PERIC_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <64>;
 			status = "disabled";
 		};
 
diff --git a/src/arm64/ti/k3-am62-lp-sk.dts b/src/arm64/ti/k3-am62-lp-sk.dts
index 5e6feb8cd1..c4149059a4 100644
--- a/src/arm64/ti/k3-am62-lp-sk.dts
+++ b/src/arm64/ti/k3-am62-lp-sk.dts
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
  *
- * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am62-main.dtsi b/src/arm64/ti/k3-am62-main.dtsi
index 464b7565d0..e9cffca073 100644
--- a/src/arm64/ti/k3-am62-main.dtsi
+++ b/src/arm64/ti/k3-am62-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM625 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_main {
@@ -42,9 +42,8 @@
 		};
 	};
 
-	main_conf: syscon@100000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x00 0x00100000 0x00 0x20000>;
+	main_conf: bus@100000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x00 0x00100000 0x20000>;
@@ -559,10 +558,9 @@
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 6>;
 		assigned-clock-parents = <&k3_clks 57 8>;
+		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		ti,trm-icp = <0x2>;
-		bus-width = <8>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
@@ -580,7 +578,8 @@
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0x0>;
@@ -592,8 +591,6 @@
 		ti,itap-del-sel-sd-hs = <0x1>;
 		ti,itap-del-sel-sdr12 = <0xa>;
 		ti,itap-del-sel-sdr25 = <0x1>;
-		ti,clkbuf-sel = <0x7>;
-		bus-width = <4>;
 		status = "disabled";
 	};
 
@@ -604,7 +601,8 @@
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0x0>;
@@ -616,7 +614,6 @@
 		ti,itap-del-sel-sd-hs = <0xa>;
 		ti,itap-del-sel-sdr12 = <0xa>;
 		ti,itap-del-sel-sdr25 = <0x1>;
-		ti,clkbuf-sel = <0x7>;
 		status = "disabled";
 	};
 
@@ -640,6 +637,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -663,6 +662,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -779,9 +780,10 @@
 		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
 		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
 		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
-		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+		      <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+		      <0x00 0x30201000 0x00 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			    "ovr1", "ovr2", "vp1", "vp2";
+			    "ovr1", "ovr2", "vp1", "vp2", "common1";
 		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 186 6>,
 			 <&dss_vp1_clk>,
diff --git a/src/arm64/ti/k3-am62-mcu.dtsi b/src/arm64/ti/k3-am62-mcu.dtsi
index 0e0b234581..e66d486ef1 100644
--- a/src/arm64/ti/k3-am62-mcu.dtsi
+++ b/src/arm64/ti/k3-am62-mcu.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM625 SoC Family MCU Domain peripherals
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
diff --git a/src/arm64/ti/k3-am62-phycore-som.dtsi b/src/arm64/ti/k3-am62-phycore-som.dtsi
index aa43e7407e..43488cc8bc 100644
--- a/src/arm64/ti/k3-am62-phycore-som.dtsi
+++ b/src/arm64/ti/k3-am62-phycore-som.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
  * Author: Wadim Egorov <w.egorov@phytec.de>
  *
  * Product homepage:
@@ -317,7 +317,6 @@
 &sdhci0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	non-removable;
 	status = "okay";
diff --git a/src/arm64/ti/k3-am62-thermal.dtsi b/src/arm64/ti/k3-am62-thermal.dtsi
index a358757e26..12ba833002 100644
--- a/src/arm64/ti/k3-am62-thermal.dtsi
+++ b/src/arm64/ti/k3-am62-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-am62-verdin-dahlia.dtsi b/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
index bf6d27e70b..6c4cec8728 100644
--- a/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-dahlia.dtsi
@@ -185,7 +185,6 @@
 
 /* Verdin SD_1 */
 &sdhci1 {
-	ti,driver-strength-ohm = <33>;
 	status = "okay";
 };
 
diff --git a/src/arm64/ti/k3-am62-verdin-dev.dtsi b/src/arm64/ti/k3-am62-verdin-dev.dtsi
index 680071688d..be62648e78 100644
--- a/src/arm64/ti/k3-am62-verdin-dev.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-dev.dtsi
@@ -206,7 +206,6 @@
 
 /* Verdin SD_1 */
 &sdhci1 {
-	ti,driver-strength-ohm = <33>;
 	status = "okay";
 };
 
diff --git a/src/arm64/ti/k3-am62-verdin-mallow.dtsi b/src/arm64/ti/k3-am62-verdin-mallow.dtsi
index 17b93534f6..77b1beb638 100644
--- a/src/arm64/ti/k3-am62-verdin-mallow.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-mallow.dtsi
@@ -127,6 +127,16 @@
 		    <&pinctrl_qspi1_cs2_gpio>;
 	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <18500000>;
+	};
 };
 
 /* Verdin UART_3 */
diff --git a/src/arm64/ti/k3-am62-verdin-wifi.dtsi b/src/arm64/ti/k3-am62-verdin-wifi.dtsi
index a6808b10c7..4768ef42c4 100644
--- a/src/arm64/ti/k3-am62-verdin-wifi.dtsi
+++ b/src/arm64/ti/k3-am62-verdin-wifi.dtsi
@@ -26,7 +26,6 @@
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	ti,fails-without-test-cd;
-	ti,driver-strength-ohm = <50>;
 	vmmc-supply = <&reg_3v3>;
 	status = "okay";
 };
diff --git a/src/arm64/ti/k3-am62-verdin.dtsi b/src/arm64/ti/k3-am62-verdin.dtsi
index 6a06724b6d..e8d8857ad5 100644
--- a/src/arm64/ti/k3-am62-verdin.dtsi
+++ b/src/arm64/ti/k3-am62-verdin.dtsi
@@ -42,6 +42,22 @@
 		usb1 = &usb1;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_id>;
+		id-gpios = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+		label = "USB_1";
+		self-powered;
+		vbus-supply = <&reg_usb0_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb0_ep>;
+			};
+		};
+	};
+
 	verdin_gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -151,6 +167,18 @@
 		vin-supply = <&reg_sd_3v3_1v8>;
 	};
 
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_en>;
+		enable-active-high;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -436,6 +464,13 @@
 		>;
 	};
 
+	/* Verdin USB_1_EN */
+	pinctrl_usb0_en: main-gpio1-50-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0254, PIN_INPUT, 7) /* (C20) USB0_DRVVBUS.GPIO1_50 */ /* SODIMM 155 */
+		>;
+	};
+
 	/* On-module I2C - PMIC_I2C */
 	pinctrl_i2c0: main-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -660,13 +695,6 @@
 		>;
 	};
 
-	/* Verdin USB_1 */
-	pinctrl_usb0: main-usb0-default-pins {
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */
-		>;
-	};
-
 	/* Verdin USB_2 */
 	pinctrl_usb1: main-usb1-default-pins {
 		pinctrl-single,pins = <
@@ -1013,7 +1041,7 @@
 		"",
 		"",
 		"SODIMM_17",
-		"", /* 50 */
+		"SODIMM_155", /* 50 */
 		"",
 		"",
 		"",
@@ -1118,7 +1146,7 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <850000>;
-				regulator-min-microvolt = <850000>;
+				regulator-min-microvolt = <750000>;
 				regulator-name = "+VDD_CORE (PMIC BUCK1)";
 			};
 
@@ -1407,7 +1435,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci0>;
 	non-removable;
-	ti,driver-strength-ohm = <50>;
 	status = "okay";
 };
 
@@ -1416,7 +1443,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhci1>;
 	disable-wp;
-	ti,driver-strength-ohm = <50>;
 	vmmc-supply = <&reg_sdhc1_vmmc>;
 	vqmmc-supply = <&reg_sdhc1_vqmmc>;
 	status = "disabled";
@@ -1428,11 +1454,16 @@
 	status = "disabled";
 };
 
-/* TODO: role swich using ID pin */
 &usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>;
+	adp-disable;
+	usb-role-switch;
 	status = "disabled";
+
+	port {
+		usb0_ep: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 /* Verdin USB_2 */
diff --git a/src/arm64/ti/k3-am62-wakeup.dtsi b/src/arm64/ti/k3-am62-wakeup.dtsi
index fef76f52a5..23ce1bfda8 100644
--- a/src/arm64/ti/k3-am62-wakeup.dtsi
+++ b/src/arm64/ti/k3-am62-wakeup.dtsi
@@ -1,10 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+
 &cbass_wakeup {
 	wkup_conf: syscon@43000000 {
 		bootph-all;
@@ -21,14 +23,34 @@
 		};
 	};
 
-	wkup_uart0: serial@2b300000 {
-		compatible = "ti,am64-uart", "ti,am654-uart";
-		reg = <0x00 0x2b300000 0x00 0x100>;
-		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+	target-module@2b300050 {
+		compatible = "ti,sysc-omap2", "ti,sysc";
+		reg = <0x00 0x2b300050 0x00 0x4>,
+		      <0x00 0x2b300054 0x00 0x4>,
+		      <0x00 0x2b300058 0x00 0x4>;
+		reg-names = "rev", "sysc", "syss";
+		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+				 SYSC_OMAP2_SOFTRESET |
+				 SYSC_OMAP2_AUTOIDLE)>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>,
+				<SYSC_IDLE_SMART_WKUP>;
+		ti,syss-mask = <1>;
+		ti,no-reset-on-init;
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
-		clock-names = "fclk";
-		status = "disabled";
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x2b300000 0x100000>;
+
+		wkup_uart0: serial@0 {
+			compatible = "ti,am64-uart", "ti,am654-uart";
+			reg = <0x0 0x100>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
 	};
 
 	wkup_i2c0: i2c@2b200000 {
diff --git a/src/arm64/ti/k3-am62.dtsi b/src/arm64/ti/k3-am62.dtsi
index f1e15206e1..f0781f2bea 100644
--- a/src/arm64/ti/k3-am62.dtsi
+++ b/src/arm64/ti/k3-am62.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM62 SoC Family
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso
index 5e80ca7033..3b4643b7d1 100644
--- a/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso
+++ b/src/arm64/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
index 5e1cbbc27c..81a2763d43 100644
--- a/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
+++ b/src/arm64/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am625-beagleplay.dts b/src/arm64/ti/k3-am625-beagleplay.dts
index eadbdd9ffe..a34e0df2ab 100644
--- a/src/arm64/ti/k3-am625-beagleplay.dts
+++ b/src/arm64/ti/k3-am625-beagleplay.dts
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * https://beagleplay.org/
  *
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
  */
 
 /dts-v1/;
@@ -29,7 +29,6 @@
 		i2c3 = &main_i2c3;
 		i2c4 = &wkup_i2c0;
 		i2c5 = &mcu_i2c0;
-		mdio-gpio0 = &mdio0;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
 		mmc2 = &sdhci2;
@@ -231,27 +230,6 @@
 		};
 	};
 
-	/* Workaround for errata i2329 - just use mdio bitbang */
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mdio0_pins_default>;
-		gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpsw3g_phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-
-		cpsw3g_phy1: ethernet-phy@1 {
-			reg = <1>;
-			reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <25>;
-			reset-deassert-us = <60000>; /* T2 */
-		};
-	};
 };
 
 &main_pmx0 {
@@ -312,8 +290,8 @@
 
 	mdio0_pins_default: mdio0-default-pins {
 		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
-			AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+			AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
+			AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
 		>;
 	};
 
@@ -573,11 +551,13 @@
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 	status = "okay";
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "peripheral";
 };
 
@@ -611,8 +591,20 @@
 };
 
 &cpsw3g_mdio {
-	/* Workaround for errata i2329 - Use mdio bitbang */
-	status = "disabled";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <25>;
+		reset-deassert-us = <60000>; /* T2 */
+	};
 };
 
 &main_gpio0 {
@@ -827,7 +819,6 @@
 	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	status = "okay";
 };
@@ -840,7 +831,6 @@
 
 	vmmc-supply = <&vdd_3v3_sd>;
 	vqmmc-supply = <&vdd_sd_dv>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
 	cd-debounce-delay-ms = <100>;
@@ -852,12 +842,10 @@
 	vmmc-supply = <&wlan_en>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
-	bus-width = <4>;
 	non-removable;
 	ti,fails-without-test-cd;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,driver-strength-ohm = <50>;
 	assigned-clocks = <&k3_clks 157 158>;
 	assigned-clock-parents = <&k3_clks 157 160>;
 	#address-cells = <1>;
diff --git a/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts b/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
index 4bc0134c98..a83a904978 100644
--- a/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/src/arm64/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
  * Author: Wadim Egorov <w.egorov@phytec.de>
  *
  * Product homepage:
@@ -222,6 +222,7 @@
 	cpsw3g_phy3: ethernet-phy@3 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
 		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 	};
@@ -333,7 +334,6 @@
 	vqmmc-supply = <&vddshv5_sdio>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	no-1-8-v;
 	status = "okay";
diff --git a/src/arm64/ti/k3-am625-sk.dts b/src/arm64/ti/k3-am625-sk.dts
index b18092497c..ae81ebb39d 100644
--- a/src/arm64/ti/k3-am625-sk.dts
+++ b/src/arm64/ti/k3-am625-sk.dts
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * AM625 SK: https://www.ti.com/lit/zip/sprr448
  *
- * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am625.dtsi b/src/arm64/ti/k3-am625.dtsi
index 4193c2b3ee..4014add632 100644
--- a/src/arm64/ti/k3-am625.dtsi
+++ b/src/arm64/ti/k3-am625.dtsi
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM625 SoC family in Quad core configuration
  *
  * TRM: https://www.ti.com/lit/pdf/spruiv7
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am62a-main.dtsi b/src/arm64/ti/k3-am62a-main.dtsi
index f0b8c9ab14..aa1e057082 100644
--- a/src/arm64/ti/k3-am62a-main.dtsi
+++ b/src/arm64/ti/k3-am62a-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM62A SoC Family Main Domain peripherals
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_main {
@@ -42,9 +42,8 @@
 		};
 	};
 
-	main_conf: syscon@100000 {
-		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
-		reg = <0x00 0x00100000 0x00 0x20000>;
+	main_conf: bus@100000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x20000>;
@@ -536,6 +535,24 @@
 		status = "disabled";
 	};
 
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 57 6>;
+		assigned-clock-parents = <&k3_clks 57 8>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		status = "disabled";
+	};
+
 	sdhci1: mmc@fa00000 {
 		compatible = "ti,am62-sdhci";
 		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
@@ -543,7 +560,8 @@
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
@@ -555,8 +573,30 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
-		ti,clkbuf-sel = <0x7>;
+		no-1-8-v;
+		status = "disabled";
+	};
+
+	sdhci2: mmc@fa20000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+		clock-names = "clk_ahb", "clk_xin";
 		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		no-1-8-v;
 		status = "disabled";
 	};
@@ -985,4 +1025,30 @@
 		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	dss: dss@30200000 {
+		compatible = "ti,am62a7-dss";
+		reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+		      <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+		      <0x00 0x30206000 0x00 0x1000>, /* vid */
+		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */
+		      <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+		      <0x00 0x30201000 0x00 0x1000>; /* common1 */
+		reg-names = "common", "vidl1", "vid",
+			    "ovr1", "ovr2", "vp1", "vp2", "common1";
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 186 6>,
+			 <&k3_clks 186 0>,
+			 <&k3_clks 186 2>;
+		clock-names = "fck", "vp1", "vp2";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
diff --git a/src/arm64/ti/k3-am62a-mcu.dtsi b/src/arm64/ti/k3-am62a-mcu.dtsi
index a6d16a9408..8c36e56f41 100644
--- a/src/arm64/ti/k3-am62a-mcu.dtsi
+++ b/src/arm64/ti/k3-am62a-mcu.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM625 SoC Family MCU Domain peripherals
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
diff --git a/src/arm64/ti/k3-am62a-thermal.dtsi b/src/arm64/ti/k3-am62a-thermal.dtsi
index 85ce545633..c7486fb2a5 100644
--- a/src/arm64/ti/k3-am62a-thermal.dtsi
+++ b/src/arm64/ti/k3-am62a-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-am62a-wakeup.dtsi b/src/arm64/ti/k3-am62a-wakeup.dtsi
index 4e8279fa01..f7bec48470 100644
--- a/src/arm64/ti/k3-am62a-wakeup.dtsi
+++ b/src/arm64/ti/k3-am62a-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_wakeup {
diff --git a/src/arm64/ti/k3-am62a.dtsi b/src/arm64/ti/k3-am62a.dtsi
index 61a210ecd5..b1b8846002 100644
--- a/src/arm64/ti/k3-am62a.dtsi
+++ b/src/arm64/ti/k3-am62a.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM62A SoC Family
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/src/arm64/ti/k3-am62a7-sk.dts b/src/arm64/ti/k3-am62a7-sk.dts
index 7b71425862..f241637a56 100644
--- a/src/arm64/ti/k3-am62a7-sk.dts
+++ b/src/arm64/ti/k3-am62a7-sk.dts
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * AM62A SK: https://www.ti.com/lit/zip/sprr459
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -20,6 +20,7 @@
 		serial0 = &wkup_uart0;
 		serial2 = &main_uart0;
 		serial3 = &main_uart1;
+		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
 	};
 
@@ -132,6 +133,18 @@
 		clock-frequency = <12288000>;
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	codec_audio: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "AM62Ax-SKEVM";
@@ -181,6 +194,39 @@
 };
 
 &main_pmx0 {
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x100, PIN_OUTPUT, 0) /* (V17) VOUT0_VSYNC */
+			AM62AX_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (T18) VOUT0_HSYNC */
+			AM62AX_IOPAD(0x104, PIN_OUTPUT, 0) /* (AA22) VOUT0_PCLK */
+			AM62AX_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (U17) VOUT0_DE */
+			AM62AX_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62AX_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (U21) VOUT0_DATA1 */
+			AM62AX_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (U20) VOUT0_DATA2 */
+			AM62AX_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (U19) VOUT0_DATA3 */
+			AM62AX_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (T19) VOUT0_DATA4 */
+			AM62AX_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (U18) VOUT0_DATA5 */
+			AM62AX_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V22) VOUT0_DATA6 */
+			AM62AX_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA7 */
+			AM62AX_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V19) VOUT0_DATA8 */
+			AM62AX_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (V18) VOUT0_DATA9 */
+			AM62AX_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA10 */
+			AM62AX_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA11 */
+			AM62AX_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (W20) VOUT0_DATA12 */
+			AM62AX_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (W19) VOUT0_DATA13 */
+			AM62AX_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y21) VOUT0_DATA14 */
+			AM62AX_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA15 */
+			AM62AX_IOPAD(0x05c, PIN_OUTPUT, 1) /* (P22) GPMC0_AD8.VOUT0_DATA16 */
+			AM62AX_IOPAD(0x060, PIN_OUTPUT, 1) /* (R19) GPMC0_AD9.VOUT0_DATA17 */
+			AM62AX_IOPAD(0x064, PIN_OUTPUT, 1) /* (R20) GPMC0_AD10.VOUT0_DATA18 */
+			AM62AX_IOPAD(0x068, PIN_OUTPUT, 1) /* (R22) GPMC0_AD11.VOUT0_DATA19 */
+			AM62AX_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62AX_IOPAD(0x070, PIN_OUTPUT, 1) /* (R21) GPMC0_AD13.VOUT0_DATA21 */
+			AM62AX_IOPAD(0x074, PIN_OUTPUT, 1) /* (T20) GPMC0_AD14.VOUT0_DATA22 */
+			AM62AX_IOPAD(0x078, PIN_OUTPUT, 1) /* (T21) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
+
 	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
@@ -218,6 +264,22 @@
 		>;
 	};
 
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
+			AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -466,6 +528,36 @@
 				  "CSI_EN", "AUTO_100M_1000M_CONFIG",
 				  "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
 	};
+
+	sii9022: bridge-hdmi@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		interrupt-parent = <&exp1>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = < 0 >;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_i2c2 {
@@ -475,13 +567,21 @@
 	clock-frequency = <400000>;
 };
 
+&sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	disable-wp;
+};
+
 &sdhci1 {
 	/* SD/MMC */
 	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -583,3 +683,20 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+};
+
+&dss_ports {
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
diff --git a/src/arm64/ti/k3-am62a7.dtsi b/src/arm64/ti/k3-am62a7.dtsi
index 58f1c43edc..f86a23404e 100644
--- a/src/arm64/ti/k3-am62a7.dtsi
+++ b/src/arm64/ti/k3-am62a7.dtsi
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM62A7 SoC family in Quad core configuration
  *
  * TRM: https://www.ti.com/lit/zip/spruj16
  *
- * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am62p-main.dtsi b/src/arm64/ti/k3-am62p-main.dtsi
index 4c51bae06b..7337a9e135 100644
--- a/src/arm64/ti/k3-am62p-main.dtsi
+++ b/src/arm64/ti/k3-am62p-main.dtsi
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree file for the AM62P main domain peripherals
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_main {
@@ -158,6 +158,43 @@
 		};
 	};
 
+	dmss_csi: bus@4e000000 {
+		compatible = "simple-bus";
+		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x408000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ti,sci-dev-id = <198>;
+
+		inta_main_dmss_csi: interrupt-controller@4e400000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x4e400000 0x00 0x8000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <200>;
+			ti,interrupt-ranges = <0 237 8>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+		};
+
+		main_bcdma_csi: dma-controller@4e230000 {
+			compatible = "ti,am62a-dmss-bcdma-csirx";
+			reg = <0x00 0x4e230000 0x00 0x100>,
+			      <0x00 0x4e180000 0x00 0x8000>,
+			      <0x00 0x4e100000 0x00 0x10000>;
+			reg-names = "gcfg", "rchanrt", "ringrt";
+			#dma-cells = <3>;
+			msi-parent = <&inta_main_dmss_csi>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <199>;
+			ti,sci-rm-range-rchan = <0x21>;
+		};
+	};
+
 	dmsc: system-controller@44043000 {
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
@@ -534,7 +571,21 @@
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 2>;
 		assigned-clock-parents = <&k3_clks 57 4>;
-		ti,otap-del-sel-legacy = <0x0>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		ti,otap-del-sel-legacy = <0x1>;
+		ti,otap-del-sel-mmc-hs = <0x1>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		status = "disabled";
 	};
 
@@ -545,7 +596,19 @@
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
@@ -556,7 +619,19 @@
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
@@ -891,4 +966,73 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x5000 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@30210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x30210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 204 2>;
+		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
+	};
 };
diff --git a/src/arm64/ti/k3-am62p-mcu.dtsi b/src/arm64/ti/k3-am62p-mcu.dtsi
index c4b0b91d70..b973b550eb 100644
--- a/src/arm64/ti/k3-am62p-mcu.dtsi
+++ b/src/arm64/ti/k3-am62p-mcu.dtsi
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree file for the AM62P MCU domain peripherals
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
@@ -187,6 +187,8 @@
 		ranges = <0x79000000 0x00 0x79000000 0x8000>,
 			 <0x79020000 0x00 0x79020000 0x8000>;
 		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
 		mcu_r5fss0_core0: r5f@79000000 {
 			compatible = "ti,am62-r5f";
 			reg = <0x79000000 0x00008000>,
diff --git a/src/arm64/ti/k3-am62p-thermal.dtsi b/src/arm64/ti/k3-am62p-thermal.dtsi
index 85ce545633..c7486fb2a5 100644
--- a/src/arm64/ti/k3-am62p-thermal.dtsi
+++ b/src/arm64/ti/k3-am62p-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-am62p-wakeup.dtsi b/src/arm64/ti/k3-am62p-wakeup.dtsi
index 19f42b3939..a84756c336 100644
--- a/src/arm64/ti/k3-am62p-wakeup.dtsi
+++ b/src/arm64/ti/k3-am62p-wakeup.dtsi
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree file for the AM62P wakeup domain peripherals
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_wakeup {
@@ -78,6 +78,7 @@
 		ranges = <0x78000000 0x00 0x78000000 0x8000>,
 			 <0x78100000 0x00 0x78100000 0x8000>;
 		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		wkup_r5fss0_core0: r5f@78000000 {
 			compatible = "ti,am62-r5f";
diff --git a/src/arm64/ti/k3-am62p.dtsi b/src/arm64/ti/k3-am62p.dtsi
index 84ffe7b9dc..94babc4125 100644
--- a/src/arm64/ti/k3-am62p.dtsi
+++ b/src/arm64/ti/k3-am62p.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM62P SoC Family
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -71,7 +71,7 @@
 			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
 			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
 			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
-			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */
 			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
 			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
diff --git a/src/arm64/ti/k3-am62p5-sk.dts b/src/arm64/ti/k3-am62p5-sk.dts
index 1773c05f75..e86f34e835 100644
--- a/src/arm64/ti/k3-am62p5-sk.dts
+++ b/src/arm64/ti/k3-am62p5-sk.dts
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree file for the AM62P5-SK
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Schematics: https://www.ti.com/lit/zip/sprr487
  */
@@ -413,6 +413,7 @@
 	status = "okay";
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
+	bootph-all;
 };
 
 &sdhci1 {
@@ -422,9 +423,7 @@
 	vqmmc-supply = <&vddshv_sdio>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 	bootph-all;
 };
 
@@ -445,6 +444,10 @@
 };
 
 &cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+	status = "okay";
+
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
diff --git a/src/arm64/ti/k3-am62p5.dtsi b/src/arm64/ti/k3-am62p5.dtsi
index 50147bb63e..41f479dca4 100644
--- a/src/arm64/ti/k3-am62p5.dtsi
+++ b/src/arm64/ti/k3-am62p5.dtsi
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree file for the AM62P5 SoC family (quad core)
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * TRM: https://www.ti.com/lit/pdf/spruj83
  */
diff --git a/src/arm64/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/src/arm64/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
new file mode 100644
index 0000000000..f0b2fd4165
--- /dev/null
+++ b/src/arm64/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_fan_pins_default>;
+	};
+};
+
+&main_pmx0 {
+	gpio_fan_pins_default: gpio-fan-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+		>;
+	};
+};
+
+&thermal_zones {
+	main0_thermal: main0-thermal {
+		trips {
+			main0_thermal_trip0: main0-thermal-trip {
+				temperature = <65000>;  /* millicelsius */
+				hysteresis = <2000>;    /* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&main0_thermal_trip0>;
+				cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/ti/k3-am62x-sk-common.dtsi b/src/arm64/ti/k3-am62x-sk-common.dtsi
index 33768c02d8..3c45782ab2 100644
--- a/src/arm64/ti/k3-am62x-sk-common.dtsi
+++ b/src/arm64/ti/k3-am62x-sk-common.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Common dtsi for AM62x SK and derivatives
  *
- * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/leds/common.h>
@@ -411,7 +411,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -421,7 +420,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -460,6 +458,7 @@
 };
 
 &usbss0 {
+	bootph-all;
 	status = "okay";
 	ti,vbus-divider;
 };
@@ -470,6 +469,7 @@
 };
 
 &usb0 {
+	bootph-all;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	usb-role-switch;
diff --git a/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso b/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso
index 6f4cd73c2f..76ca02127f 100644
--- a/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso
+++ b/src/arm64/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * IMX219 (RPi v2) Camera Module
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso b/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso
index 9323a4b383..ccc7f5e431 100644
--- a/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso
+++ b/src/arm64/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
index dcaa33a4c8..4eaf9d757d 100644
--- a/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
+++ b/src/arm64/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -1,7 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso b/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso
index 43a0ddc123..18c3082f68 100644
--- a/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso
+++ b/src/arm64/ti/k3-am62x-sk-hdmi-audio.dtso
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * Audio playback via HDMI for AM625-SK and AM62-LP SK.
  *
@@ -6,7 +6,7 @@
  * AM625 SK: https://www.ti.com/tool/SK-AM62
  * AM62-LP SK: https://www.ti.com/tool/SK-AM62-LP
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am64-main.dtsi b/src/arm64/ti/k3-am64-main.dtsi
index e348114f42..6f9aa5e021 100644
--- a/src/arm64/ti/k3-am64-main.dtsi
+++ b/src/arm64/ti/k3-am64-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM642 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/phy/phy-cadence.h>
@@ -51,10 +51,11 @@
 			reg = <0x00000014 0x4>;
 		};
 
-		serdes_ln_ctrl: mux-controller {
-			compatible = "mmio-mux";
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "reg-mux";
+			reg = <0x4080 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
+			mux-reg-masks = <0x0 0x3>; /* SERDES0 lane0 select */
 		};
 
 		phy_gmii_sel: phy@4044 {
@@ -626,13 +627,18 @@
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
 		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
+		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		status = "disabled";
 	};
 
@@ -643,15 +649,19 @@
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,trm-icp = <0x2>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,clkbuf-sel = <0x7>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
@@ -1041,25 +1051,6 @@
 		status = "disabled";
 	};
 
-	pcie0_ep: pcie-ep@f102000 {
-		compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
-		reg = <0x00 0x0f102000 0x00 0x1000>,
-		      <0x00 0x0f100000 0x00 0x400>,
-		      <0x00 0x0d000000 0x00 0x00800000>,
-		      <0x00 0x68000000 0x00 0x08000000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
-		max-link-speed = <2>;
-		num-lanes = <1>;
-		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 114 0>;
-		clock-names = "fck";
-		max-functions = /bits/ 8 <1>;
-		status = "disabled";
-	};
-
 	epwm0: pwm@23000000 {
 		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
 		#pwm-cells = <3>;
@@ -1244,6 +1235,18 @@
 			};
 		};
 
+		icssg0_iep0: iep@2e000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2e000 0x1000>;
+			clocks = <&icssg0_iepclk_mux>;
+		};
+
+		icssg0_iep1: iep@2f000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2f000 0x1000>;
+			clocks = <&icssg0_iepclk_mux>;
+		};
+
 		icssg0_mii_rt: mii-rt@32000 {
 			compatible = "ti,pruss-mii", "syscon";
 			reg = <0x32000 0x100>;
@@ -1385,6 +1388,18 @@
 			};
 		};
 
+		icssg1_iep0: iep@2e000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2e000 0x1000>;
+			clocks = <&icssg1_iepclk_mux>;
+		};
+
+		icssg1_iep1: iep@2f000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2f000 0x1000>;
+			clocks = <&icssg1_iepclk_mux>;
+		};
+
 		icssg1_mii_rt: mii-rt@32000 {
 			compatible = "ti,pruss-mii", "syscon";
 			reg = <0x32000 0x100>;
diff --git a/src/arm64/ti/k3-am64-mcu.dtsi b/src/arm64/ti/k3-am64-mcu.dtsi
index b9508072be..ec17285869 100644
--- a/src/arm64/ti/k3-am64-mcu.dtsi
+++ b/src/arm64/ti/k3-am64-mcu.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM64 SoC Family MCU Domain peripherals
  *
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
diff --git a/src/arm64/ti/k3-am64-phycore-som.dtsi b/src/arm64/ti/k3-am64-phycore-som.dtsi
index 1678e74cb7..125e507966 100644
--- a/src/arm64/ti/k3-am64-phycore-som.dtsi
+++ b/src/arm64/ti/k3-am64-phycore-som.dtsi
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com
  * Author: Matt McKee <mmckee@phytec.com>
  *
- * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
  * Author: Wadim Egorov <w.egorov@phytec.de>
  *
  * Product homepage:
@@ -318,3 +318,10 @@
 	disable-wp;
 	keep-power-in-suspend;
 };
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/src/arm64/ti/k3-am64-thermal.dtsi b/src/arm64/ti/k3-am64-thermal.dtsi
index 036db56ba7..b1cd554242 100644
--- a/src/arm64/ti/k3-am64-thermal.dtsi
+++ b/src/arm64/ti/k3-am64-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-am64.dtsi b/src/arm64/ti/k3-am64.dtsi
index 0187c42aed..74e56cc68d 100644
--- a/src/arm64/ti/k3-am64.dtsi
+++ b/src/arm64/ti/k3-am64.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM642 SoC Family
  *
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/src/arm64/ti/k3-am642-evm-icssg1-dualemac.dtso b/src/arm64/ti/k3-am642-evm-icssg1-dualemac.dtso
new file mode 100644
index 0000000000..af2fd3e744
--- /dev/null
+++ b/src/arm64/ti/k3-am642-evm-icssg1-dualemac.dtso
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for enabling 2nd ICSSG1 port on AM642 EVM
+ *
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/icssg1-eth/ethernet-ports/port@1";
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mdio_mux>;
+		mdio-parent-bus = <&icssg1_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			icssg1_phy2: ethernet-phy@3 {
+				reg = <3>;
+				tx-internal-delay-ps = <250>;
+				rx-internal-delay-ps = <2000>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 2) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-0 = <&rgmii1_pins_default>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mdio_mux_1 {
+	status = "disabled";
+};
+
+&icssg1_eth {
+	pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
+};
+
+&icssg1_emac1 {
+	status = "okay";
+	phy-handle = <&icssg1_phy2>;
+	phy-mode = "rgmii-id";
+};
diff --git a/src/arm64/ti/k3-am642-evm.dts b/src/arm64/ti/k3-am642-evm.dts
index 8c5651d2cf..53fe1d065d 100644
--- a/src/arm64/ti/k3-am642-evm.dts
+++ b/src/arm64/ti/k3-am642-evm.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -32,6 +32,7 @@
 		mmc1 = &sdhci1;
 		ethernet0 = &cpsw_port1;
 		ethernet1 = &cpsw_port2;
+		ethernet2 = &icssg1_emac0;
 	};
 
 	memory@80000000 {
@@ -198,7 +199,7 @@
 		mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
 	};
 
-	mdio-mux-1 {
+	mdio_mux_1: mdio-mux-1 {
 		compatible = "mdio-mux-multiplexer";
 		mux-controls = <&mdio_mux>;
 		mdio-parent-bus = <&cpsw3g_mdio>;
@@ -229,6 +230,64 @@
 		max-bitrate = <5000000>;
 		standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
 	};
+
+	icssg1_eth: icssg1-eth {
+		compatible = "ti,am642-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg1_rgmii1_pins_default>;
+		sram = <&oc_sram>;
+		ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+		firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,	/* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+		ti,mii-g-rt = <&icssg1_mii_g_rt>;
+		ti,mii-rt = <&icssg1_mii_rt>;
+		ti,iep = <&icssg1_iep0>,  <&icssg1_iep1>;
+		interrupt-parent = <&icssg1_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+		dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc201 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc202 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc203 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc204 15>, /* egress slice 1 */
+		       <&main_pktdma 0xc205 15>, /* egress slice 1 */
+		       <&main_pktdma 0xc206 15>, /* egress slice 1 */
+		       <&main_pktdma 0xc207 15>, /* egress slice 1 */
+		       <&main_pktdma 0x4200 15>, /* ingress slice 0 */
+		       <&main_pktdma 0x4201 15>; /* ingress slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg1_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg1_phy1>;
+				phy-mode = "rgmii-id";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+			icssg1_emac1: port@1 {
+				reg = <1>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				status = "disabled";
+			};
+		};
+	};
 };
 
 &main_pmx0 {
@@ -383,6 +442,30 @@
 			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
 		>;
 	};
+
+	icssg1_mdio1_pins_default: icssg1-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */
+			AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */
+		>;
+	};
+
+	icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins{
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+			AM64X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+			AM64X_IOPAD(0x00e8, PIN_INPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+			AM64X_IOPAD(0x00ec, PIN_INPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+			AM64X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+			AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+			AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+		>;
+	};
 };
 
 &main_uart0 {
@@ -494,10 +577,10 @@
 /* eMMC */
 &sdhci0 {
 	status = "okay";
-	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
+	bootph-all;
 };
 
 /* SD/MMC */
@@ -506,9 +589,7 @@
 	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
-	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -660,25 +741,25 @@
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
@@ -705,12 +786,6 @@
 	num-lanes = <1>;
 };
 
-&pcie0_ep {
-	phys = <&serdes0_pcie_link>;
-	phy-names = "pcie-phy";
-	num-lanes = <1>;
-};
-
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J12 */
@@ -731,3 +806,15 @@
 	pinctrl-0 = <&main_mcan1_pins_default>;
 	phys = <&transceiver2>;
 };
+
+&icssg1_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg1_mdio1_pins_default>;
+
+	icssg1_phy1: ethernet-phy@f {
+		reg = <0xf>;
+		tx-internal-delay-ps = <250>;
+		rx-internal-delay-ps = <2000>;
+	};
+};
diff --git a/src/arm64/ti/k3-am642-hummingboard-t-pcie.dtso b/src/arm64/ti/k3-am642-hummingboard-t-pcie.dtso
new file mode 100644
index 0000000000..bd9a5caf20
--- /dev/null
+++ b/src/arm64/ti/k3-am642-hummingboard-t-pcie.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
+ *
+ * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_pins>;
+	reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "okay";
+};
+
+&serdes0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	serdes0_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes_mux {
+	idle-state = <1>;
+};
diff --git a/src/arm64/ti/k3-am642-hummingboard-t-usb3.dtso b/src/arm64/ti/k3-am642-hummingboard-t-usb3.dtso
new file mode 100644
index 0000000000..ffcc3bd3c7
--- /dev/null
+++ b/src/arm64/ti/k3-am642-hummingboard-t-usb3.dtso
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
+ *
+ * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+&serdes0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	serdes0_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes_mux {
+	idle-state = <0>;
+};
+
+&usbss0 {
+	/delete-property/ ti,usb2-only;
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	phys = <&serdes0_link>;
+	phy-names = "cdns3,usb3-phy";
+};
diff --git a/src/arm64/ti/k3-am642-hummingboard-t.dts b/src/arm64/ti/k3-am642-hummingboard-t.dts
new file mode 100644
index 0000000000..234d76e4e9
--- /dev/null
+++ b/src/arm64/ti/k3-am642-hummingboard-t.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
+ *
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-am642.dtsi"
+#include "k3-am642-sr-som.dtsi"
+
+/ {
+	model = "SolidRun AM642 HummingBoard-T";
+	compatible = "solidrun,am642-hummingboard-t", "solidrun,am642-sr-som", "ti,am642";
+
+	aliases {
+		serial5 = &main_uart3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_default_pins>;
+
+		/* D24 */
+		led1: led-1 {
+			label = "led1";
+			gpios = <&main_gpio0 29 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		/* D25 */
+		led2: led-2 {
+			label = "led2";
+			gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		/* D26 */
+		led3: led-3 {
+			label = "led3";
+			gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+
+	regulator-m2-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&regulator_pcie_3v3_default_pins>;
+		regulator-name = "m2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-vpp-1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&regulator_vpp_1v8_default_pins>;
+		regulator-name = "vpp-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&main_gpio1 78 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serdes_mux: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&serdes_mux_default_pins>;
+		#mux-control-cells = <0>;
+		/*
+		 * Mux has 2 IOs:
+		 * - select: 0 = USB-3 (M2); 1 = PCIE (M1)
+		 * - shutdown: 0 = active; 1 = disabled (high impedance)
+		 */
+		mux-gpios = <&main_gpio1 40 GPIO_ACTIVE_HIGH>, <&main_gpio1 41 GPIO_ACTIVE_HIGH>;
+		/* default disabled */
+		idle-state = <2>;
+	};
+};
+
+&main_gpio0 {
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		output-low; /* deasserted */
+		line-name = "m2-reset";
+	};
+
+	m1-m2-w-disable1-hog {
+		gpio-hog;
+		gpios = <32 GPIO_ACTIVE_LOW>;
+		output-low; /* deasserted */
+		line-name = "m1-m2-pcie-w-disable1";
+	};
+
+	m1-m2-w-disable2-hog {
+		gpio-hog;
+		gpios = <34 GPIO_ACTIVE_LOW>;
+		output-low; /* deasserted */
+		line-name = "m1-m2-pcie-w-disable2";
+	};
+};
+
+&main_gpio1 {
+	m1-pcie-clkreq0-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "m1-pcie-clkreq0";
+	};
+
+	m2-pcie-clkreq-hog {
+		gpio-hog;
+		gpios = <35 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "m2-pcie-clkreq";
+	};
+};
+
+&main_i2c0 {
+	pinctrl-0 = <&main_i2c0_default_pins>, <&main_i2c0_int_default_pins>;
+
+	humidity-sensor@41 {
+		compatible = "ti,hdc2010";
+		reg = <0x41>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <37 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	light-sensor@44 {
+		compatible = "ti,opt3001";
+		reg = <0x44>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <37 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	/* charger@6a */
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_default_pins>;
+	status = "okay";
+
+	rtc@69 {
+		compatible = "abracon,abx80x";
+		reg = <0x69>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_default_pins>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_default_pins>;
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <8000000>;
+	};
+};
+
+&main_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_default_pins>;
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <8000000>;
+	};
+};
+
+&main_pmx0 {
+	leds_default_pins: leds-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0074, PIN_OUTPUT, 7) /* GPMC0_AD14.GPIO0_29 */
+			AM64X_IOPAD(0x0078, PIN_OUTPUT, 7) /* GPMC0_AD15.GPIO0_30 */
+			AM64X_IOPAD(0x0088, PIN_OUTPUT, 7) /* GPMC0_OEn_REn.GPIO0_33 */
+		>;
+	};
+
+	main_i2c0_int_default_pins: main-i2c0-int-default-pins {
+		pinctrl-single,pins = <
+			/* external pull-up on Carrier */
+			AM64X_IOPAD(0x0098, PIN_INPUT, 7) /* GPMC0_WAIT0.GPIO0_37 */
+		>;
+	};
+
+	main_i2c1_default_pins: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			/* external pull-up on SoM */
+			AM64X_IOPAD(0x0268, PIN_INPUT, 0) /* I2C1_SCL.I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT, 0) /* I2C1_SDA.I2C1_SDA */
+		>;
+	};
+
+	main_mcan0_default_pins: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* MCAN0_RX.MCAN0_RX */
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* MCAN0_TX.MCAN0_TX */
+		>;
+	};
+
+	main_mcan1_default_pins: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* MCAN1_RX.MCAN1_RX */
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* MCAN1_TX.MCAN1_TX */
+		>;
+	};
+
+	main_uart3_default_pins: main-uart3-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x016c, PIN_INPUT, 10) /* PRG0_PRU0_GPO3.UART3_CTSn */
+			AM64X_IOPAD(0x0170, PIN_OUTPUT, 10) /* PRG0_PRU0_GPO4.UART3_TXD */
+			AM64X_IOPAD(0x0174, PIN_OUTPUT, 10) /* PRG0_PRU0_GPO5.UART3_RTSn */
+			AM64X_IOPAD(0x01ac, PIN_INPUT, 10) /* PRG0_PRU0_GPO19.UART3_RXD */
+		>;
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pinctrl-single,pins = <
+			/* connector M2 RESET */
+			AM64X_IOPAD(0x0030, PIN_OUTPUT, 7) /* OSPI0_CSn1.GPIO0_12 */
+			/* connectors M1 & M2 W_DISABLE1 */
+			AM64X_IOPAD(0x0084, PIN_OUTPUT, 7) /* GPMC0_ADVN_ALE.GPIO0_32 */
+			/* connectors M1 & M2 W_DISABLE2 */
+			AM64X_IOPAD(0x008c, PIN_OUTPUT, 7) /* GPMC0_WEN.GPIO0_34 */
+			/* connectors M1 & M2 PERST0 (PCI Reset) */
+			AM64X_IOPAD(0x019c, PIN_OUTPUT, 7) /* PRG0_PRU0_GPO15.GPIO1_15 */
+			/* connector M1 CLKREQ0 */
+			AM64X_IOPAD(0x018c, PIN_INPUT, 7) /* PRG0_PRU0_GPO11.GPIO1_11 */
+			/* connector M2 CLKREQ0 */
+			AM64X_IOPAD(0x01ec, PIN_INPUT, 7) /* PRG0_PRU1_GPO15.GPIO1_35 */
+		>;
+	};
+
+	regulator_pcie_3v3_default_pins: regulator-pcie-3v3-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01a4, PIN_OUTPUT, 7) /* PRG0_PRU0_GPO17.GPIO1_17 */
+		>;
+	};
+
+	regulator_vpp_1v8_default_pins: regulator-vpp-1v8-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x029c, PIN_OUTPUT, 7) /* MMC1_SDWP.GPIO1_78 */
+		>;
+	};
+
+	rtc_int_default_pins: rtc-int-default-pins {
+		pinctrl-single,pins = <
+			/* external pull-up on Carrier */
+			AM64X_IOPAD(0x00b4, PIN_INPUT, 7) /* GPMC0_CSn3.GPIO0_44 */
+		>;
+	};
+
+	serdes_mux_default_pins: serdes-mux-default-pins {
+		pinctrl-single,pins = <
+			/* SEL, 10k pull-down on carrier, 2.2k pullup on SoM */
+			AM64X_IOPAD(0x0200, PIN_OUTPUT, 7) /* PRG0_MDIO0_MDIO.GPIO1_40 */
+			/* EN */
+			AM64X_IOPAD(0x0204, PIN_OUTPUT, 7) /* PRG0_MDIO0_MDC.GPIO1_41 */
+		>;
+	};
+};
+
+&main_uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart3_default_pins>;
+	uart-has-rtscts;
+	rs485-rts-active-low;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+};
diff --git a/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts b/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
index 53b64e5541..8237b8c815 100644
--- a/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/src/arm64/ti/k3-am642-phyboard-electra-rdk.dts
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com
  * Author: Matt McKee <mmckee@phytec.com>
  *
- * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
  * Author: Wadim Egorov <w.egorov@phytec.de>
  *
  * Product homepage:
@@ -159,6 +159,15 @@
 		>;
 	};
 
+	main_spi0_pins_default: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x020c, PIN_OUTPUT, 7)	/* (C13) SPI0_CS1.GPIO1_43 */
+			AM64X_IOPAD(0x0210, PIN_INPUT, 0)	/* (D13) SPI0_CLK */
+			AM64X_IOPAD(0x0214, PIN_OUTPUT, 0)	/* (A13) SPI0_D0 */
+			AM64X_IOPAD(0x0218, PIN_INPUT, 0)	/* (A14) SPI0_D1 */
+		>;
+	};
+
 	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0230, PIN_INPUT, 0)	/* (D15) UART0_RXD */
@@ -248,6 +257,20 @@
 	phys = <&can_tc2>;
 };
 
+&main_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins_default>;
+	cs-gpios = <0>, <&main_gpio1 43 GPIO_ACTIVE_LOW>;
+	ti,pindir-d0-out-d1-in;
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &main_uart0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -269,7 +292,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	bus-width = <4>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	no-1-8-v;
 };
diff --git a/src/arm64/ti/k3-am642-sk.dts b/src/arm64/ti/k3-am642-sk.dts
index 1dddd6fc1a..67cd41bf80 100644
--- a/src/arm64/ti/k3-am642-sk.dts
+++ b/src/arm64/ti/k3-am642-sk.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -469,9 +469,7 @@
 	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
-	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
-	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
@@ -646,25 +644,25 @@
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
diff --git a/src/arm64/ti/k3-am642-sr-som.dtsi b/src/arm64/ti/k3-am642-sr-som.dtsi
new file mode 100644
index 0000000000..c19d0b8bbf
--- /dev/null
+++ b/src/arm64/ti/k3-am642-sr-som.dtsi
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Josua Mayer <josua@solid-run.com>
+ *
+ */
+
+#include <dt-bindings/net/ti-dp83869.h>
+
+/ {
+	model = "SolidRun AM642 SoM";
+	compatible = "solidrun,am642-sr-som", "ti,am642";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &icssg1_emac0;
+		ethernet2 = &icssg1_emac1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		serial2 = &main_uart0;
+	};
+
+	chosen {
+		/* SoC default UART console */
+		stdout-path = "serial2:115200n8";
+	};
+
+	/* PRU Ethernet Controller */
+	ethernet {
+		compatible = "ti,am642-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pru_rgmii1_default_pins>, <&pru_rgmii2_default_pins>;
+
+		sram = <&oc_sram>;
+		ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		/* configure internal pinmux for mii mode */
+		ti,pruss-gp-mux-sel = <2>, <2>, <2>, <2>, <2>, <2>;
+
+		ti,mii-g-rt = <&icssg1_mii_g_rt>;
+		ti,mii-rt = <&icssg1_mii_rt>;
+		ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+
+		/*
+		 * Configure icssg interrupt controller to map pru-internal
+		 * interrupts 8/9 via channels 0/1 to host interrupts 0/1.
+		 *
+		 * For details see interrupt controller documentation:
+		 * Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
+		 */
+		interrupt-parent = <&icssg1_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc201 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc202 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc203 15>, /* egress slice 0 */
+		       <&main_pktdma 0xc204 15>, /* egress slice 1 */
+		       <&main_pktdma 0xc205 15>, /* egress slice 1 */
+		       <&main_pktdma 0xc206 15>, /* egress slice 1 */
+		       <&main_pktdma 0xc207 15>, /* egress slice 1 */
+		       <&main_pktdma 0x4200 15>, /* ingress slice 0 */
+		       <&main_pktdma 0x4201 15>; /* ingress slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			icssg1_emac0: port@0 {
+				reg = <0>;
+				ti,syscon-rgmii-delay = <&main_conf 0x4110>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&ethernet_phy2>;
+				phy-mode = "rgmii-id";
+			};
+
+			icssg1_emac1: port@1 {
+				reg = <1>;
+				ti,syscon-rgmii-delay = <&main_conf 0x4114>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&ethernet_phy1>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	/* DDR16SS0:
+	 * - Bank 1 @ 0x080000000-0x0FFFFFFFF: max. 2GB in 32-bit address space
+	 * - Bank 2 @ 0x880000000-0x9FFFFFFFF: max. 6GB in 64-bit address space
+	 */
+	memory@80000000 {
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000001 0x80000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	vdd_mmc0: regulator-vdd-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_default_pins>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_default_pins>;
+	status = "okay";
+
+	ethernet_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.a0f1";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ethernet_phy0_default_pins>;
+		ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+		ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
+		/*
+		 * Disable interrupts because ISR never clears 0x0040
+		 *
+		 * interrupt-parent = <&main_gpio1>;
+		 * interrupts = <70 IRQ_TYPE_LEVEL_LOW>;
+		 */
+		/*
+		 * Disable HW Reset because clock signal is daisy-chained
+		 *
+		 * reset-gpios = <&main_gpio0 84 GPIO_ACTIVE_LOW>;
+		 * reset-assert-us = <1>;
+		 * reset-deassert-us = <30>;
+		 */
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&icssg1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pru1_mdio0_default_pins>;
+	status = "okay";
+
+	ethernet_phy1: ethernet-phy@3 {
+		compatible = "ethernet-phy-id2000.a0f1";
+		reg = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ethernet_phy1_default_pins>;
+		ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+		ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
+		/*
+		 * Disable interrupts because ISR never clears 0x0040
+		 *
+		 * interrupt-parent = <&main_gpio1>;
+		 * interrupts = <70 IRQ_TYPE_LEVEL_LOW>;
+		 */
+		/*
+		 * Disable HW Reset because clock signal is daisy-chained
+		 *
+		 * reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>;
+		 * reset-assert-us = <1>;
+		 * reset-deassert-us = <30>;
+		 */
+	};
+
+	ethernet_phy2: ethernet-phy@f {
+		compatible = "ethernet-phy-id2000.a0f1";
+		reg = <0xf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ethernet_phy2_default_pins>;
+		ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
+		/*
+		 * Disable interrupts because ISR never clears 0x0040
+		 *
+		 * interrupt-parent = <&main_gpio1>;
+		 * interrupts = <70 IRQ_TYPE_LEVEL_LOW>;
+		 */
+		/*
+		 * Disable HW Reset because clock signal is daisy-chained
+		 *
+		 * reset-gpios = <&main_gpio0 52 GPIO_ACTIVE_LOW>;
+		 * reset-assert-us = <1>;
+		 * reset-deassert-us = <30>;
+		 */
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_default_pins>;
+	status = "okay";
+
+	som_eeprom: eeprom@50 {
+		compatible = "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&main_pmx0 {
+	/* hog global functions */
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_phy_default_pins>;
+
+	ethernet_phy_default_pins: ethernet-phy-default-pins {
+		pinctrl-single,pins = <
+			/* interrupt / power-down, external pull-up on SoM */
+			AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* EXTINTn.GPIO1_70 */
+		>;
+	};
+
+	ethernet_phy0_default_pins: ethernet-phy0-default-pins {
+		pinctrl-single,pins = <
+			/* reset */
+			AM64X_IOPAD(0x0154, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */
+			/* reference clock */
+			AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */
+		>;
+	};
+
+	ethernet_phy1_default_pins: ethernet-phy1-default-pins {
+		pinctrl-single,pins = <
+			/* reset */
+			AM64X_IOPAD(0x0150, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */
+			/* led0, external pull-down on SoM */
+			AM64X_IOPAD(0x0128, PIN_INPUT, 7) /* PRG1_PRU1_GPO8.GPIO0_73 */
+			/* led1/rxer */
+			AM64X_IOPAD(0x011c, PIN_INPUT, 7) /* PRG1_PRU1_GPO5.GPIO0_70 */
+		>;
+	};
+
+	ethernet_phy2_default_pins: ethernet-phy2-default-pins {
+		pinctrl-single,pins = <
+			/* reset */
+			AM64X_IOPAD(0x00d4, PIN_OUTPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */
+			/* led0, external pull-down on SoM */
+			AM64X_IOPAD(0x00d8, PIN_INPUT, 7) /* PRG1_PRU0_GPO8.GPIO0_53 */
+			/* led1/rxer */
+			AM64X_IOPAD(0x00cc, PIN_INPUT, 7) /* PRG1_PRU0_GPO5.GPIO0_50 */
+		>;
+	};
+
+	main_i2c0_default_pins: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* external pull-up on SoM */
+			AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* I2C0_SCL.I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* I2C0_SDA.I2C0_SDA */
+		>;
+	};
+
+	/*
+	 * main_mmc0_default_pins: main-mmc0-default-pins
+	 *
+	 * MMC0_CMD: no padconfig
+	 * MMC0_CLK: no padconfig, external pull-up on SoM
+	 * MMC0_DAT0: no padconfig
+	 * MMC0_DAT1: no padconfig
+	 * MMC0_DAT2: no padconfig
+	 * MMC0_DAT3: no padconfig
+	 * MMC0_DAT4: no padconfig
+	 * MMC0_DAT5: no padconfig
+	 * MMC0_DAT6: no padconfig
+	 * MMC0_DAT7: no padconfig
+	 * MMC0_DS: no padconfig, external pull-down on SoM
+	 */
+
+	main_mmc1_default_pins: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* MMC1_CLK.MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* MMC1_DAT0.MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* MMC1_DAT1.MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* MMC1_DAT2.MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* MMC1_DAT3.MMC1_DAT3 */
+			/* external pull-down on SoM & Carrier */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* MMC1_SDCD.MMC1_SDCD */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB: clock loopback */
+		>;
+	};
+
+	main_uart0_default_pins: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* UART0_RXD.UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* UART0_TXD.UART0_TXD */
+		>;
+	};
+
+	mdio0_default_pins: mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	ospi0_default_pins: ospi0-default-pins {
+		pinctrl-single,pins = <
+			/* external pull-down on SoM */
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* OSPI0_CLK.OSPI0_CLK */
+			AM64X_IOPAD(0x0008, PIN_OUTPUT, 0) /* OSPI0_DQS.OSPI0_DQS */
+			/* external pull-up on SoM */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* OSPI0_CSn0.OSPI0_CSn0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* OSPI0_D0.OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* OSPI0_D1.OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* OSPI0_D2.OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* OSPI0_D3.OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* OSPI0_D4.OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* OSPI0_D5.OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* OSPI0_D6.OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* OSPI0_D7.OSPI0_D7 */
+		>;
+	};
+
+	ospi0_flash0_default_pins: ospi0-flash0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0034, PIN_OUTPUT, 7) /* OSPI0_CSn2.GPIO0_13 */
+			AM64X_IOPAD(0x0038, PIN_INPUT, 7) /* OSPI0_CSn3.GPIO0_14 */
+		>;
+	};
+
+	pru1_mdio0_default_pins: pru1-mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* PRG1_MDIO0_MDC.PRG1_MDIO0_MDC */
+			AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* PRG1_MDIO0_MDIO.PRG1_MDIO0_MDIO */
+		>;
+	};
+
+	pru_rgmii1_default_pins: pru-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+			AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+			AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+			AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+			AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+			AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+			AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+		>;
+	};
+
+	pru_rgmii2_default_pins: pru-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_INPUT, 2) /* PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	rgmii1_default_pins: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_INPUT, 4) /* PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+	usb0_default_pins: usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* USB0_DRVVBUS.USB0_DRVVBUS */
+		>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+/* SoC default UART console */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_default_pins>;
+	status = "okay";
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_default_pins>;
+	num-cs = <1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ospi0_flash0_default_pins>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <200000000>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		cdns,read-delay = <0>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&main_gpio0 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&sdhci0 {
+	/* mmc0 pins have no padconfig */
+	bus-width = <8>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	non-removable;
+	cap-mmc-hw-reset;
+	no-sd;
+	/*
+	 * MMC controller supports switching between 1.8V and 3.3V signalling.
+	 * However MMC0 (unlike MMC1) does not integrate an LDO.
+	 * Explicitly link a regulator node for indicating to the driver which
+	 * voltages are actually usable.
+	 */
+	vqmmc-supply = <&vdd_mmc0>;
+	status = "okay";
+};
+
+/*
+ * microSD is on carrier - however since SoC can boot from it,
+ * configure it just in case.
+ */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_default_pins>;
+	bus-width = <4>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	status = "okay";
+};
+
+/*
+ * USB settings are a carrier choice - however since SoC can boot from it,
+ * configure as USB-2.0 OTG here, keeping USB-3 serdes disabled.
+ */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_default_pins>;
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	ti,usb2-only;
+};
diff --git a/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index 55102d35ce..1f4dc5ad16 100644
--- a/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/src/arm64/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -422,7 +422,6 @@
 	cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	no-mmc;
-	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
 };
diff --git a/src/arm64/ti/k3-am642.dtsi b/src/arm64/ti/k3-am642.dtsi
index 7a6eedea3a..8589ee55ef 100644
--- a/src/arm64/ti/k3-am642.dtsi
+++ b/src/arm64/ti/k3-am642.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM642 SoC family in Dual core configuration
  *
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am65-iot2050-arduino-connector.dtsi b/src/arm64/ti/k3-am65-iot2050-arduino-connector.dtsi
new file mode 100644
index 0000000000..7ff0abd7c6
--- /dev/null
+++ b/src/arm64/ti/k3-am65-iot2050-arduino-connector.dtsi
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Siemens AG, 2018-2023
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits for IOT2050 variants with Arduino connector
+ */
+
+&wkup_pmx0 {
+	pinctrl-names =
+		"default",
+		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
+		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
+		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
+		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
+		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+	pinctrl-0 = <&d0_uart0_rxd>;
+	pinctrl-1 = <&d0_uart0_rxd>;
+	pinctrl-2 = <&d0_gpio>;
+	pinctrl-3 = <&d0_gpio_pullup>;
+	pinctrl-4 = <&d0_gpio_pulldown>;
+	pinctrl-5 = <&d1_uart0_txd>;
+	pinctrl-6 = <&d1_gpio>;
+	pinctrl-7 = <&d1_gpio_pullup>;
+	pinctrl-8 = <&d1_gpio_pulldown>;
+	pinctrl-9 = <&d2_uart0_ctsn>;
+	pinctrl-10 = <&d2_gpio>;
+	pinctrl-11 = <&d2_gpio_pullup>;
+	pinctrl-12 = <&d2_gpio_pulldown>;
+	pinctrl-13 = <&d3_uart0_rtsn>;
+	pinctrl-14 = <&d3_gpio>;
+	pinctrl-15 = <&d3_gpio_pullup>;
+	pinctrl-16 = <&d3_gpio_pulldown>;
+	pinctrl-17 = <&d10_spi0_cs0>;
+	pinctrl-18 = <&d10_gpio>;
+	pinctrl-19 = <&d10_gpio_pullup>;
+	pinctrl-20 = <&d10_gpio_pulldown>;
+	pinctrl-21 = <&d11_spi0_d0>;
+	pinctrl-22 = <&d11_gpio>;
+	pinctrl-23 = <&d11_gpio_pullup>;
+	pinctrl-24 = <&d11_gpio_pulldown>;
+	pinctrl-25 = <&d12_spi0_d1>;
+	pinctrl-26 = <&d12_gpio>;
+	pinctrl-27 = <&d12_gpio_pullup>;
+	pinctrl-28 = <&d12_gpio_pulldown>;
+	pinctrl-29 = <&d13_spi0_clk>;
+	pinctrl-30 = <&d13_gpio>;
+	pinctrl-31 = <&d13_gpio_pullup>;
+	pinctrl-32 = <&d13_gpio_pulldown>;
+	pinctrl-33 = <&a0_gpio>;
+	pinctrl-34 = <&a0_gpio_pullup>;
+	pinctrl-35 = <&a0_gpio_pulldown>;
+	pinctrl-36 = <&a1_gpio>;
+	pinctrl-37 = <&a1_gpio_pullup>;
+	pinctrl-38 = <&a1_gpio_pulldown>;
+	pinctrl-39 = <&a2_gpio>;
+	pinctrl-40 = <&a2_gpio_pullup>;
+	pinctrl-41 = <&a2_gpio_pulldown>;
+	pinctrl-42 = <&a3_gpio>;
+	pinctrl-43 = <&a3_gpio_pullup>;
+	pinctrl-44 = <&a3_gpio_pulldown>;
+	pinctrl-45 = <&a4_gpio>;
+	pinctrl-46 = <&a4_gpio_pullup>;
+	pinctrl-47 = <&a4_gpio_pulldown>;
+	pinctrl-48 = <&a5_gpio>;
+	pinctrl-49 = <&a5_gpio_pullup>;
+	pinctrl-50 = <&a5_gpio_pulldown>;
+
+	d0_uart0_rxd: d0-uart0-rxd-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+		>;
+	};
+
+	d0_gpio: d0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+		>;
+	};
+
+	d0_gpio_pullup: d0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d0_gpio_pulldown: d0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d1_uart0_txd: d1-uart0-txd-pins {
+		pinctrl-single,pins = <
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d1_gpio: d1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pullup: d1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pulldown: d1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d2_uart0_ctsn: d2-uart0-ctsn-pins {
+		pinctrl-single,pins = <
+			/* (P1) MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+		>;
+	};
+
+	d2_gpio: d2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pullup: d2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pulldown: d2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d3_uart0_rtsn: d3-uart0-rtsn-pins {
+		pinctrl-single,pins = <
+			/* (N3) MCU_UART0_RTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d3_gpio: d3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pullup: d3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pulldown: d3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d10_spi0_cs0: d10-spi0-cs0-pins {
+		pinctrl-single,pins = <
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	d10_gpio: d10-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pullup: d10-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pulldown: d10-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d11_spi0_d0: d11-spi0-d0-pins {
+		pinctrl-single,pins = <
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+		>;
+	};
+
+	d11_gpio: d11-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pullup: d11-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pulldown: d11-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d12_spi0_d1: d12-spi0-d1-pins {
+		pinctrl-single,pins = <
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+		>;
+	};
+
+	d12_gpio: d12-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pullup: d12-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pulldown: d12-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d13_spi0_clk: d13-spi0-clk-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+		>;
+	};
+
+	d13_gpio: d13-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pullup: d13-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pulldown: d13-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a0_gpio: a0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pullup: a0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pulldown: a0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a1_gpio: a1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pullup: a1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pulldown: a1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a2_gpio: a2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pullup: a2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pulldown: a2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a3_gpio: a3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pullup: a3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pulldown: a3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a4_gpio: a4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pullup: a4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pulldown: a4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a5_gpio: a5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+		>;
+	};
+
+	a5_gpio_pullup: a5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	a5_gpio_pulldown: a5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
+			/* (AD6) WKUP_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
+		>;
+	};
+
+	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
+		pinctrl-single,pins = <
+			/* (R2) WKUP_GPIO0_21 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
+		pinctrl-single,pins = <
+			/* (N4) WKUP_GPIO0_34 */
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
+			/* (M2) WKUP_GPIO0_36 */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
+			/* (M3) WKUP_GPIO0_37 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
+			/* (M4) WKUP_GPIO0_38 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (M1) WKUP_GPIO0_41 */
+			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_pmx0 {
+	pinctrl-names =
+		"default",
+		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+	pinctrl-0 = <&d4_ehrpwm0_a>;
+	pinctrl-1 = <&d4_ehrpwm0_a>;
+	pinctrl-2 = <&d4_gpio>;
+	pinctrl-3 = <&d4_gpio_pullup>;
+	pinctrl-4 = <&d4_gpio_pulldown>;
+
+	pinctrl-5 = <&d5_ehrpwm1_a>;
+	pinctrl-6 = <&d5_gpio>;
+	pinctrl-7 = <&d5_gpio_pullup>;
+	pinctrl-8 = <&d5_gpio_pulldown>;
+
+	pinctrl-9 = <&d6_ehrpwm2_a>;
+	pinctrl-10 = <&d6_gpio>;
+	pinctrl-11 = <&d6_gpio_pullup>;
+	pinctrl-12 = <&d6_gpio_pulldown>;
+
+	pinctrl-13 = <&d7_ehrpwm3_a>;
+	pinctrl-14 = <&d7_gpio>;
+	pinctrl-15 = <&d7_gpio_pullup>;
+	pinctrl-16 = <&d7_gpio_pulldown>;
+
+	pinctrl-17 = <&d8_ehrpwm4_a>;
+	pinctrl-18 = <&d8_gpio>;
+	pinctrl-19 = <&d8_gpio_pullup>;
+	pinctrl-20 = <&d8_gpio_pulldown>;
+
+	pinctrl-21 = <&d9_ehrpwm5_a>;
+	pinctrl-22 = <&d9_gpio>;
+	pinctrl-23 = <&d9_gpio_pullup>;
+	pinctrl-24 = <&d9_gpio_pulldown>;
+
+	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+		pinctrl-single,pins = <
+			/* (AG18) EHRPWM0_A */
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d4_gpio: d4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	d4_gpio_pullup: d4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d4_gpio_pulldown: d4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+		pinctrl-single,pins = <
+			/* (AF17) EHRPWM1_A */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d5_gpio: d5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+		>;
+	};
+
+	d5_gpio_pullup: d5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d5_gpio_pulldown: d5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+		pinctrl-single,pins = <
+			/* (AH16) EHRPWM2_A */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d6_gpio: d6-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d6_gpio_pullup: d6-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d6_gpio_pulldown: d6-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+		pinctrl-single,pins = <
+			/* (AH15) EHRPWM3_A */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d7_gpio: d7-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+		>;
+	};
+
+	d7_gpio_pullup: d7-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d7_gpio_pulldown: d7-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+		pinctrl-single,pins = <
+			/* (AG15) EHRPWM4_A */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d8_gpio: d8-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+		>;
+	};
+
+	d8_gpio_pullup: d8-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d8_gpio_pulldown: d8-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+		pinctrl-single,pins = <
+			/* (AD15) EHRPWM5_A */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d9_gpio: d9-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+		>;
+	};
+
+	d9_gpio_pullup: d9-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d9_gpio_pulldown: d9-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
+		"", "", "", "IO7", "", "", "", "", "IO8", "",
+		"", "IO9";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&arduino_i2c_aio_switch_pins_default>,
+		<&arduino_io_oe_pins_default>,
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>;
+	gpio-line-names =
+		/* 0..9 */
+		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
+		/* 30..39 */
+		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
+		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
+		/* 40..49 */
+		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
+		"IO11",
+		/* 50..51 */
+		"IO12", "IO10";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	/* D4200 */
+	pcal9535_1: gpio@20 {
+		compatible = "nxp,pcal9535";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
+			"A5-pull", "", "",
+			"IO14-enable", "IO15-enable", "IO16-enable",
+			"IO17-enable", "IO18-enable", "IO19-enable";
+	};
+
+	/* D4201 */
+	pcal9535_2: gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-direction", "IO1-direction", "IO2-direction",
+			"IO3-direction", "IO4-direction", "IO5-direction",
+			"IO6-direction", "IO7-direction",
+			"IO8-direction", "IO9-direction", "IO10-direction",
+			"IO11-direction", "IO12-direction", "IO13-direction",
+			"IO19-direction";
+	};
+
+	/* D4202 */
+	pcal9535_3: gpio@25 {
+		compatible = "nxp,pcal9535";
+		reg = <0x25>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
+			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
+			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
+			"IO12-pull", "IO13-pull";
+	};
+};
+
+&mcu_uart0 {
+	status = "okay";
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5>;
+	};
+};
diff --git a/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi b/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
index 1d19798595..c50a585dd6 100644
--- a/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2021-2023
  *
@@ -8,10 +8,7 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG1
  */
 
-&dss {
-	assigned-clocks = <&k3_clks 67 2>;
-	assigned-clock-parents = <&k3_clks 67 5>;
-};
+#include "k3-am65-iot2050-dp.dtsi"
 
 &serdes0 {
 	status = "disabled";
diff --git a/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi b/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi
index e9b57b87e4..e2584a5efe 100644
--- a/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) Siemens AG, 2021
+ * Copyright (c) Siemens AG, 2021-2023
  *
  * Authors:
  *   Chao Zeng <chao.zeng@siemens.com>
@@ -9,6 +9,11 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG2
  */
 
+&mcu_r5fss0 {
+	/* lock-step mode not supported on PG2 boards */
+	ti,cluster-mode = <0>;
+};
+
 &main_pmx0 {
 	cp2102n_reset_pin_default: cp2102n-reset-default-pins {
 		pinctrl-single,pins = <
@@ -33,21 +38,3 @@
 	/* Workaround needed to get DP clock of 154Mhz */
 	assigned-clocks = <&k3_clks 67 0>;
 };
-
-&serdes0 {
-	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
-	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
-};
-
-&dwc3_0 {
-	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
-				 <&k3_clks 151 8>;  /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
-	phys = <&serdes0 PHY_TYPE_USB3 0>;
-	phy-names = "usb3-phy";
-};
-
-&usb0 {
-	maximum-speed = "super-speed";
-	snps,dis-u1-entry-quirk;
-	snps,dis-u2-entry-quirk;
-};
diff --git a/src/arm64/ti/k3-am65-iot2050-common.dtsi b/src/arm64/ti/k3-am65-iot2050-common.dtsi
index 61a634afaa..ef34b851e1 100644
--- a/src/arm64/ti/k3-am65-iot2050-common.dtsi
+++ b/src/arm64/ti/k3-am65-iot2050-common.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) Siemens AG, 2018-2021
+ * Copyright (c) Siemens AG, 2018-2024
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
@@ -9,6 +9,7 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */
 
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/net/ti-dp83867.h>
 
@@ -75,6 +76,12 @@
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		/* To reserve the power-on(PON) reason for watchdog reset */
+		wdt_reset_memory_region: wdt-memory@a2200000 {
+			reg = <0x00 0xa2200000 0x00 0x1000>;
+			no-map;
+		};
 	};
 
 	leds {
@@ -82,28 +89,46 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins_default>;
 
-		status-led-red {
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			label = "status-led-red";
 			gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
 
-		status-led-green {
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			label = "status-led-green";
 			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led1-red {
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			label = "user-led1-red";
 			gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led1-green {
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			label = "user-led1-green";
 			gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led2-red {
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			label = "user-led2-red";
 			gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led2-green {
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			label = "user-led2-green";
 			gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
 	};
@@ -186,434 +211,6 @@
 };
 
 &wkup_pmx0 {
-	pinctrl-names =
-		"default",
-		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
-		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
-		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
-		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
-		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
-		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
-		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
-		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
-		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
-		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
-		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
-		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
-		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
-		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
-
-	pinctrl-0 = <&d0_uart0_rxd>;
-	pinctrl-1 = <&d0_uart0_rxd>;
-	pinctrl-2 = <&d0_gpio>;
-	pinctrl-3 = <&d0_gpio_pullup>;
-	pinctrl-4 = <&d0_gpio_pulldown>;
-	pinctrl-5 = <&d1_uart0_txd>;
-	pinctrl-6 = <&d1_gpio>;
-	pinctrl-7 = <&d1_gpio_pullup>;
-	pinctrl-8 = <&d1_gpio_pulldown>;
-	pinctrl-9 = <&d2_uart0_ctsn>;
-	pinctrl-10 = <&d2_gpio>;
-	pinctrl-11 = <&d2_gpio_pullup>;
-	pinctrl-12 = <&d2_gpio_pulldown>;
-	pinctrl-13 = <&d3_uart0_rtsn>;
-	pinctrl-14 = <&d3_gpio>;
-	pinctrl-15 = <&d3_gpio_pullup>;
-	pinctrl-16 = <&d3_gpio_pulldown>;
-	pinctrl-17 = <&d10_spi0_cs0>;
-	pinctrl-18 = <&d10_gpio>;
-	pinctrl-19 = <&d10_gpio_pullup>;
-	pinctrl-20 = <&d10_gpio_pulldown>;
-	pinctrl-21 = <&d11_spi0_d0>;
-	pinctrl-22 = <&d11_gpio>;
-	pinctrl-23 = <&d11_gpio_pullup>;
-	pinctrl-24 = <&d11_gpio_pulldown>;
-	pinctrl-25 = <&d12_spi0_d1>;
-	pinctrl-26 = <&d12_gpio>;
-	pinctrl-27 = <&d12_gpio_pullup>;
-	pinctrl-28 = <&d12_gpio_pulldown>;
-	pinctrl-29 = <&d13_spi0_clk>;
-	pinctrl-30 = <&d13_gpio>;
-	pinctrl-31 = <&d13_gpio_pullup>;
-	pinctrl-32 = <&d13_gpio_pulldown>;
-	pinctrl-33 = <&a0_gpio>;
-	pinctrl-34 = <&a0_gpio_pullup>;
-	pinctrl-35 = <&a0_gpio_pulldown>;
-	pinctrl-36 = <&a1_gpio>;
-	pinctrl-37 = <&a1_gpio_pullup>;
-	pinctrl-38 = <&a1_gpio_pulldown>;
-	pinctrl-39 = <&a2_gpio>;
-	pinctrl-40 = <&a2_gpio_pullup>;
-	pinctrl-41 = <&a2_gpio_pulldown>;
-	pinctrl-42 = <&a3_gpio>;
-	pinctrl-43 = <&a3_gpio_pullup>;
-	pinctrl-44 = <&a3_gpio_pulldown>;
-	pinctrl-45 = <&a4_gpio>;
-	pinctrl-46 = <&a4_gpio_pullup>;
-	pinctrl-47 = <&a4_gpio_pulldown>;
-	pinctrl-48 = <&a5_gpio>;
-	pinctrl-49 = <&a5_gpio_pullup>;
-	pinctrl-50 = <&a5_gpio_pulldown>;
-
-	d0_uart0_rxd: d0-uart0-rxd-pins {
-		pinctrl-single,pins = <
-			/* (P4) MCU_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
-		>;
-	};
-
-	d0_gpio: d0-gpio-pins {
-		pinctrl-single,pins = <
-			/* (P4) WKUP_GPIO0_29 */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
-		>;
-	};
-
-	d0_gpio_pullup: d0-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (P4) WKUP_GPIO0_29 */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d0_gpio_pulldown: d0-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (P4) WKUP_GPIO0_29 */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d1_uart0_txd: d1-uart0-txd-pins {
-		pinctrl-single,pins = <
-			/* (P5) MCU_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
-		>;
-	};
-
-	d1_gpio: d1-gpio-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_30 */
-			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
-		>;
-	};
-
-	d1_gpio_pullup: d1-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_30 */
-			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
-		>;
-	};
-
-	d1_gpio_pulldown: d1-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_30 */
-			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d2_uart0_ctsn: d2-uart0-ctsn-pins {
-		pinctrl-single,pins = <
-			/* (P1) MCU_UART0_CTSn */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
-		>;
-	};
-
-	d2_gpio: d2-gpio-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
-		>;
-	};
-
-	d2_gpio_pullup: d2-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
-		>;
-	};
-
-	d2_gpio_pulldown: d2-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (P5) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d3_uart0_rtsn: d3-uart0-rtsn-pins {
-		pinctrl-single,pins = <
-			/* (N3) MCU_UART0_RTSn */
-			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
-		>;
-	};
-
-	d3_gpio: d3-gpio-pins {
-		pinctrl-single,pins = <
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
-		>;
-	};
-
-	d3_gpio_pullup: d3-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
-		>;
-	};
-
-	d3_gpio_pulldown: d3-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d10_spi0_cs0: d10-spi0-cs0-pins {
-		pinctrl-single,pins = <
-			/* (Y4) MCU_SPI0_CS0 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
-		>;
-	};
-
-	d10_gpio: d10-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y4) WKUP_GPIO0_51 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
-		>;
-	};
-
-	d10_gpio_pullup: d10-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y4) WKUP_GPIO0_51 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
-		>;
-	};
-
-	d10_gpio_pulldown: d10-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y4) WKUP_GPIO0_51 */
-			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d11_spi0_d0: d11-spi0-d0-pins {
-		pinctrl-single,pins = <
-			/* (Y3) MCU_SPI0_D0 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
-		>;
-	};
-
-	d11_gpio: d11-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y3) WKUP_GPIO0_49 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
-		>;
-	};
-
-	d11_gpio_pullup: d11-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y3) WKUP_GPIO0_49 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
-		>;
-	};
-
-	d11_gpio_pulldown: d11-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y3) WKUP_GPIO0_49 */
-			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d12_spi0_d1: d12-spi0-d1-pins {
-		pinctrl-single,pins = <
-			/* (Y2) MCU_SPI0_D1 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
-		>;
-	};
-
-	d12_gpio: d12-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y2) WKUP_GPIO0_50 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
-		>;
-	};
-
-	d12_gpio_pullup: d12-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y2) WKUP_GPIO0_50 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
-		>;
-	};
-
-	d12_gpio_pulldown: d12-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y2) WKUP_GPIO0_50 */
-			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d13_spi0_clk: d13-spi0-clk-pins {
-		pinctrl-single,pins = <
-			/* (Y1) MCU_SPI0_CLK */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
-		>;
-	};
-
-	d13_gpio: d13-gpio-pins {
-		pinctrl-single,pins = <
-			/* (Y1) WKUP_GPIO0_48 */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
-		>;
-	};
-
-	d13_gpio_pullup: d13-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (Y1) WKUP_GPIO0_48 */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
-		>;
-	};
-
-	d13_gpio_pulldown: d13-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (Y1) WKUP_GPIO0_48 */
-			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a0_gpio: a0-gpio-pins {
-		pinctrl-single,pins = <
-			/* (L6) WKUP_GPIO0_45 */
-			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
-		>;
-	};
-
-	a0_gpio_pullup: a0-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (L6) WKUP_GPIO0_45 */
-			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
-		>;
-	};
-
-	a0_gpio_pulldown: a0-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (L6) WKUP_GPIO0_45 */
-			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a1_gpio: a1-gpio-pins {
-		pinctrl-single,pins = <
-			/* (M6) WKUP_GPIO0_44 */
-			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
-		>;
-	};
-
-	a1_gpio_pullup: a1-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (M6) WKUP_GPIO0_44 */
-			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
-		>;
-	};
-
-	a1_gpio_pulldown: a1-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (M6) WKUP_GPIO0_44 */
-			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a2_gpio: a2-gpio-pins {
-		pinctrl-single,pins = <
-			/* (L5) WKUP_GPIO0_43 */
-			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
-		>;
-	};
-
-	a2_gpio_pullup: a2-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (L5) WKUP_GPIO0_43 */
-			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
-		>;
-	};
-
-	a2_gpio_pulldown: a2-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (L5) WKUP_GPIO0_43 */
-			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a3_gpio: a3-gpio-pins {
-		pinctrl-single,pins = <
-			/* (M5) WKUP_GPIO0_39 */
-			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
-		>;
-	};
-
-	a3_gpio_pullup: a3-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (M5) WKUP_GPIO0_39 */
-			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
-		>;
-	};
-
-	a3_gpio_pulldown: a3-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (M5) WKUP_GPIO0_39 */
-			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a4_gpio: a4-gpio-pins {
-		pinctrl-single,pins = <
-			/* (L2) WKUP_GPIO0_42 */
-			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
-		>;
-	};
-
-	a4_gpio_pullup: a4-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (L2) WKUP_GPIO0_42 */
-			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
-		>;
-	};
-
-	a4_gpio_pulldown: a4-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (L2) WKUP_GPIO0_42 */
-			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	a5_gpio: a5-gpio-pins {
-		pinctrl-single,pins = <
-			/* (N5) WKUP_GPIO0_35 */
-			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
-		>;
-	};
-
-	a5_gpio_pullup: a5-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (N5) WKUP_GPIO0_35 */
-			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	a5_gpio_pulldown: a5-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (N5) WKUP_GPIO0_35 */
-			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
-		pinctrl-single,pins = <
-			/* (AC7) WKUP_I2C0_SCL */
-			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
-			/* (AD6) WKUP_I2C0_SDA */
-			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
-		>;
-	};
-
 	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
 		pinctrl-single,pins = <
 			/* (AD8) MCU_I2C0_SCL */
@@ -623,13 +220,6 @@
 		>;
 	};
 
-	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
-		pinctrl-single,pins = <
-			/* (R2) WKUP_GPIO0_21 */
-			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
-		>;
-	};
-
 	push_button_pins_default: push-button-default-pins {
 		pinctrl-single,pins = <
 			/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
@@ -637,22 +227,6 @@
 		>;
 	};
 
-
-	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
-		pinctrl-single,pins = <
-			/* (N4) WKUP_GPIO0_34 */
-			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
-			/* (M2) WKUP_GPIO0_36 */
-			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
-			/* (M3) WKUP_GPIO0_37 */
-			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
-			/* (M4) WKUP_GPIO0_38 */
-			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
-			/* (M1) WKUP_GPIO0_41 */
-			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
-		>;
-	};
-
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 		pinctrl-single,pins = <
 			/* (V1) MCU_OSPI0_CLK */
@@ -716,214 +290,6 @@
 };
 
 &main_pmx0 {
-	pinctrl-names =
-		"default",
-		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
-		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
-		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
-		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
-		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
-		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
-
-	pinctrl-0 = <&d4_ehrpwm0_a>;
-	pinctrl-1 = <&d4_ehrpwm0_a>;
-	pinctrl-2 = <&d4_gpio>;
-	pinctrl-3 = <&d4_gpio_pullup>;
-	pinctrl-4 = <&d4_gpio_pulldown>;
-
-	pinctrl-5 = <&d5_ehrpwm1_a>;
-	pinctrl-6 = <&d5_gpio>;
-	pinctrl-7 = <&d5_gpio_pullup>;
-	pinctrl-8 = <&d5_gpio_pulldown>;
-
-	pinctrl-9 = <&d6_ehrpwm2_a>;
-	pinctrl-10 = <&d6_gpio>;
-	pinctrl-11 = <&d6_gpio_pullup>;
-	pinctrl-12 = <&d6_gpio_pulldown>;
-
-	pinctrl-13 = <&d7_ehrpwm3_a>;
-	pinctrl-14 = <&d7_gpio>;
-	pinctrl-15 = <&d7_gpio_pullup>;
-	pinctrl-16 = <&d7_gpio_pulldown>;
-
-	pinctrl-17 = <&d8_ehrpwm4_a>;
-	pinctrl-18 = <&d8_gpio>;
-	pinctrl-19 = <&d8_gpio_pullup>;
-	pinctrl-20 = <&d8_gpio_pulldown>;
-
-	pinctrl-21 = <&d9_ehrpwm5_a>;
-	pinctrl-22 = <&d9_gpio>;
-	pinctrl-23 = <&d9_gpio_pullup>;
-	pinctrl-24 = <&d9_gpio_pulldown>;
-
-	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
-		pinctrl-single,pins = <
-			/* (AG18) EHRPWM0_A */
-			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d4_gpio: d4-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
-		>;
-	};
-
-	d4_gpio_pullup: d4-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d4_gpio_pulldown: d4-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
-		pinctrl-single,pins = <
-			/* (AF17) EHRPWM1_A */
-			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d5_gpio: d5-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
-		>;
-	};
-
-	d5_gpio_pullup: d5-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d5_gpio_pulldown: d5-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
-		pinctrl-single,pins = <
-			/* (AH16) EHRPWM2_A */
-			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d6_gpio: d6-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
-		>;
-	};
-
-	d6_gpio_pullup: d6-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d6_gpio_pulldown: d6-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
-		pinctrl-single,pins = <
-			/* (AH15) EHRPWM3_A */
-			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d7_gpio: d7-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
-		>;
-	};
-
-	d7_gpio_pullup: d7-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d7_gpio_pulldown: d7-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
-		pinctrl-single,pins = <
-			/* (AG15) EHRPWM4_A */
-			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d8_gpio: d8-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
-		>;
-	};
-
-	d8_gpio_pullup: d8-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d8_gpio_pulldown: d8-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
-	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
-		pinctrl-single,pins = <
-			/* (AD15) EHRPWM5_A */
-			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
-		>;
-	};
-
-	d9_gpio: d9-gpio-pins {
-		pinctrl-single,pins = <
-			/* (AD15) GPIO0_51 */
-			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
-		>;
-	};
-
-	d9_gpio_pullup: d9-gpio-pullup-pins {
-		pinctrl-single,pins = <
-			/* (AD15) GPIO0_51 */
-			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
-		>;
-	};
-
-	d9_gpio_pulldown: d9-gpio-pulldown-pins {
-		pinctrl-single,pins = <
-			/* (AD15) GPIO0_51 */
-			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
-		>;
-	};
-
 	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
@@ -971,45 +337,6 @@
 		>;
 	};
 
-	dss_vout1_pins_default: dss-vout1-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
-			AM65X_IOPAD(0x0004, PIN_OUTPUT, 1)  /* VOUT1_DATA1 */
-			AM65X_IOPAD(0x0008, PIN_OUTPUT, 1)  /* VOUT1_DATA2 */
-			AM65X_IOPAD(0x000c, PIN_OUTPUT, 1)  /* VOUT1_DATA3 */
-			AM65X_IOPAD(0x0010, PIN_OUTPUT, 1)  /* VOUT1_DATA4 */
-			AM65X_IOPAD(0x0014, PIN_OUTPUT, 1)  /* VOUT1_DATA5 */
-			AM65X_IOPAD(0x0018, PIN_OUTPUT, 1)  /* VOUT1_DATA6 */
-			AM65X_IOPAD(0x001c, PIN_OUTPUT, 1)  /* VOUT1_DATA7 */
-			AM65X_IOPAD(0x0020, PIN_OUTPUT, 1)  /* VOUT1_DATA8 */
-			AM65X_IOPAD(0x0024, PIN_OUTPUT, 1)  /* VOUT1_DATA9 */
-			AM65X_IOPAD(0x0028, PIN_OUTPUT, 1)  /* VOUT1_DATA10 */
-			AM65X_IOPAD(0x002c, PIN_OUTPUT, 1)  /* VOUT1_DATA11 */
-			AM65X_IOPAD(0x0030, PIN_OUTPUT, 1)  /* VOUT1_DATA12 */
-			AM65X_IOPAD(0x0034, PIN_OUTPUT, 1)  /* VOUT1_DATA13 */
-			AM65X_IOPAD(0x0038, PIN_OUTPUT, 1)  /* VOUT1_DATA14 */
-			AM65X_IOPAD(0x003c, PIN_OUTPUT, 1)  /* VOUT1_DATA15 */
-			AM65X_IOPAD(0x0040, PIN_OUTPUT, 1)  /* VOUT1_DATA16 */
-			AM65X_IOPAD(0x0044, PIN_OUTPUT, 1)  /* VOUT1_DATA17 */
-			AM65X_IOPAD(0x0048, PIN_OUTPUT, 1)  /* VOUT1_DATA18 */
-			AM65X_IOPAD(0x004c, PIN_OUTPUT, 1)  /* VOUT1_DATA19 */
-			AM65X_IOPAD(0x0050, PIN_OUTPUT, 1)  /* VOUT1_DATA20 */
-			AM65X_IOPAD(0x0054, PIN_OUTPUT, 1)  /* VOUT1_DATA21 */
-			AM65X_IOPAD(0x0058, PIN_OUTPUT, 1)  /* VOUT1_DATA22 */
-			AM65X_IOPAD(0x005c, PIN_OUTPUT, 1)  /* VOUT1_DATA23 */
-			AM65X_IOPAD(0x0060, PIN_OUTPUT, 1)  /* VOUT1_VSYNC */
-			AM65X_IOPAD(0x0064, PIN_OUTPUT, 1)  /* VOUT1_HSYNC */
-			AM65X_IOPAD(0x0068, PIN_OUTPUT, 1)  /* VOUT1_PCLK */
-			AM65X_IOPAD(0x006c, PIN_OUTPUT, 1)  /* VOUT1_DE */
-		>;
-	};
-
-	dp_pins_default: dp-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0078, PIN_OUTPUT, 7)  /* (AF18) DP rst_n */
-		>;
-	};
-
 	main_i2c2_pins_default: main-i2c2-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0074, PIN_INPUT,  5)  /* (T27) I2C2_SCL */
@@ -1082,57 +409,11 @@
 	pinctrl-0 = <&main_uart1_pins_default>;
 };
 
-&mcu_uart0 {
-	status = "okay";
-};
-
-&main_gpio0 {
-	gpio-line-names =
-		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "", "", "",
-		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
-		"", "", "", "IO7", "", "", "", "", "IO8", "",
-		"", "IO9";
-};
-
 &main_gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_pcie_enable_pins_default>;
 };
 
-&wkup_gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 =
-		<&arduino_i2c_aio_switch_pins_default>,
-		<&arduino_io_oe_pins_default>,
-		<&push_button_pins_default>,
-		<&db9_com_mode_pins_default>;
-	gpio-line-names =
-		/* 0..9 */
-		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
-		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
-		/* 10..19 */
-		"", "", "", "", "", "", "", "", "", "",
-		/* 20..29 */
-		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
-		/* 30..39 */
-		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
-		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
-		/* 40..49 */
-		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
-		"IO11",
-		/* 50..51 */
-		"IO12", "IO10";
-};
-
-&wkup_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_i2c0_pins_default>;
-	clock-frequency = <400000>;
-};
-
 &mcu_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -1150,47 +431,6 @@
 		ti,vsel1-state-high;
 		ti,enable-vout-discharge;
 	};
-
-	/* D4200 */
-	pcal9535_1: gpio@20 {
-		compatible = "nxp,pcal9535";
-		reg = <0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-line-names =
-			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
-			"A5-pull", "", "",
-			"IO14-enable", "IO15-enable", "IO16-enable",
-			"IO17-enable", "IO18-enable", "IO19-enable";
-	};
-
-	/* D4201 */
-	pcal9535_2: gpio@21 {
-		compatible = "nxp,pcal9535";
-		reg = <0x21>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-line-names =
-			"IO0-direction", "IO1-direction", "IO2-direction",
-			"IO3-direction", "IO4-direction", "IO5-direction",
-			"IO6-direction", "IO7-direction",
-			"IO8-direction", "IO9-direction", "IO10-direction",
-			"IO11-direction", "IO12-direction", "IO13-direction",
-			"IO19-direction";
-	};
-
-	/* D4202 */
-	pcal9535_3: gpio@25 {
-		compatible = "nxp,pcal9535";
-		reg = <0x25>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-line-names =
-			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
-			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
-			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
-			"IO12-pull", "IO13-pull";
-	};
 };
 
 &main_i2c0 {
@@ -1233,32 +473,6 @@
 
 	#address-cells = <1>;
 	#size-cells = <0>;
-
-	edp-bridge@f {
-		compatible = "toshiba,tc358767";
-		reg = <0x0f>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_pins_default>;
-		reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
-
-		clock-names = "ref";
-		clocks = <&dp_refclk>;
-
-		toshiba,hpd-pin = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-		};
-	};
 };
 
 &mcu_cpsw {
@@ -1292,13 +506,6 @@
 	ti,pindir-d0-out-d1-in;
 };
 
-&tscadc1 {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5>;
-	};
-};
-
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -1364,26 +571,6 @@
 	};
 };
 
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_vout1_pins_default>;
-
-	assigned-clocks = <&k3_clks 67 2>;
-	assigned-clock-parents = <&k3_clks 67 5>;
-};
-
-&dss_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	port@1 {
-		reg = <1>;
-
-		dpi_out: endpoint {
-			remote-endpoint = <&bridge_in>;
-		};
-	};
-};
-
 &pcie1_rc {
 	status = "okay";
 	pinctrl-names = "default";
@@ -1418,13 +605,17 @@
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 };
 
 &mcu_r5fss0_core1 {
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+};
+
+&mcu_rti1 {
+	memory-region = <&wdt_reset_memory_region>;
 };
 
 &icssg0_mdio {
diff --git a/src/arm64/ti/k3-am65-iot2050-dp.dtsi b/src/arm64/ti/k3-am65-iot2050-dp.dtsi
new file mode 100644
index 0000000000..984cc80913
--- /dev/null
+++ b/src/arm64/ti/k3-am65-iot2050-dp.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Siemens AG, 2024
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits for IOT2050 variants with Display Port
+ */
+
+&main_pmx0 {
+	dss_vout1_pins_default: dss-vout1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
+			AM65X_IOPAD(0x0004, PIN_OUTPUT, 1)  /* VOUT1_DATA1 */
+			AM65X_IOPAD(0x0008, PIN_OUTPUT, 1)  /* VOUT1_DATA2 */
+			AM65X_IOPAD(0x000c, PIN_OUTPUT, 1)  /* VOUT1_DATA3 */
+			AM65X_IOPAD(0x0010, PIN_OUTPUT, 1)  /* VOUT1_DATA4 */
+			AM65X_IOPAD(0x0014, PIN_OUTPUT, 1)  /* VOUT1_DATA5 */
+			AM65X_IOPAD(0x0018, PIN_OUTPUT, 1)  /* VOUT1_DATA6 */
+			AM65X_IOPAD(0x001c, PIN_OUTPUT, 1)  /* VOUT1_DATA7 */
+			AM65X_IOPAD(0x0020, PIN_OUTPUT, 1)  /* VOUT1_DATA8 */
+			AM65X_IOPAD(0x0024, PIN_OUTPUT, 1)  /* VOUT1_DATA9 */
+			AM65X_IOPAD(0x0028, PIN_OUTPUT, 1)  /* VOUT1_DATA10 */
+			AM65X_IOPAD(0x002c, PIN_OUTPUT, 1)  /* VOUT1_DATA11 */
+			AM65X_IOPAD(0x0030, PIN_OUTPUT, 1)  /* VOUT1_DATA12 */
+			AM65X_IOPAD(0x0034, PIN_OUTPUT, 1)  /* VOUT1_DATA13 */
+			AM65X_IOPAD(0x0038, PIN_OUTPUT, 1)  /* VOUT1_DATA14 */
+			AM65X_IOPAD(0x003c, PIN_OUTPUT, 1)  /* VOUT1_DATA15 */
+			AM65X_IOPAD(0x0040, PIN_OUTPUT, 1)  /* VOUT1_DATA16 */
+			AM65X_IOPAD(0x0044, PIN_OUTPUT, 1)  /* VOUT1_DATA17 */
+			AM65X_IOPAD(0x0048, PIN_OUTPUT, 1)  /* VOUT1_DATA18 */
+			AM65X_IOPAD(0x004c, PIN_OUTPUT, 1)  /* VOUT1_DATA19 */
+			AM65X_IOPAD(0x0050, PIN_OUTPUT, 1)  /* VOUT1_DATA20 */
+			AM65X_IOPAD(0x0054, PIN_OUTPUT, 1)  /* VOUT1_DATA21 */
+			AM65X_IOPAD(0x0058, PIN_OUTPUT, 1)  /* VOUT1_DATA22 */
+			AM65X_IOPAD(0x005c, PIN_OUTPUT, 1)  /* VOUT1_DATA23 */
+			AM65X_IOPAD(0x0060, PIN_OUTPUT, 1)  /* VOUT1_VSYNC */
+			AM65X_IOPAD(0x0064, PIN_OUTPUT, 1)  /* VOUT1_HSYNC */
+			AM65X_IOPAD(0x0068, PIN_OUTPUT, 1)  /* VOUT1_PCLK */
+			AM65X_IOPAD(0x006c, PIN_OUTPUT, 1)  /* VOUT1_DE */
+		>;
+	};
+
+	dp_pins_default: dp-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0078, PIN_OUTPUT, 7)  /* (AF18) DP rst_n */
+		>;
+	};
+};
+
+&main_i2c3 {
+	edp-bridge@f {
+		compatible = "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pins_default>;
+		reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+		clock-names = "ref";
+		clocks = <&dp_refclk>;
+
+		toshiba,hpd-pin = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout1_pins_default>;
+
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+		};
+	};
+};
diff --git a/src/arm64/ti/k3-am65-iot2050-usb3.dtsi b/src/arm64/ti/k3-am65-iot2050-usb3.dtsi
new file mode 100644
index 0000000000..e5bd7c301b
--- /dev/null
+++ b/src/arm64/ti/k3-am65-iot2050-usb3.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Siemens AG, 2024
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits for IOT2050 variants with USB3 support
+ */
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 8>;  /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+	phys = <&serdes0 PHY_TYPE_USB3 0>;
+	phy-names = "usb3-phy";
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+};
diff --git a/src/arm64/ti/k3-am65-main.dtsi b/src/arm64/ti/k3-am65-main.dtsi
index fcea544656..ff857117d7 100644
--- a/src/arm64/ti/k3-am65-main.dtsi
+++ b/src/arm64/ti/k3-am65-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM6 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/phy/phy-am654-serdes.h>
 
@@ -886,20 +886,6 @@
 		status = "disabled";
 	};
 
-	pcie0_ep: pcie-ep@5500000 {
-		compatible = "ti,am654-pcie-ep";
-		reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
-		reg-names = "app", "dbics", "addr_space", "atu";
-		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
-		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
-		num-ib-windows = <16>;
-		num-ob-windows = <16>;
-		max-link-speed = <2>;
-		dma-coherent;
-		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
-		status = "disabled";
-	};
-
 	pcie1_rc: pcie@5600000 {
 		compatible = "ti,am654-pcie-rc";
 		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
@@ -921,20 +907,6 @@
 		status = "disabled";
 	};
 
-	pcie1_ep: pcie-ep@5600000 {
-		compatible = "ti,am654-pcie-ep";
-		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
-		reg-names = "app", "dbics", "addr_space", "atu";
-		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
-		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
-		num-ib-windows = <16>;
-		num-ob-windows = <16>;
-		max-link-speed = <2>;
-		dma-coherent;
-		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
-		status = "disabled";
-	};
-
 	mcasp0: mcasp@2b00000 {
 		compatible = "ti,am33xx-mcasp-audio";
 		reg = <0x0 0x02b00000 0x0 0x2000>,
@@ -1019,9 +991,10 @@
 		      <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
 		      <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
 		      <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
-		      <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		      <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */
+		      <0x0 0x04a01000 0x0 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			"ovr1", "ovr2", "vp1", "vp2";
+			"ovr1", "ovr2", "vp1", "vp2", "common1";
 
 		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
 
@@ -1050,6 +1023,13 @@
 		};
 	};
 
+	gpu: gpu@7000000 {
+		compatible = "ti,am6548-gpu", "img,powervr-sgx544";
+		reg = <0x0 0x7000000 0x0 0x10000>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	ehrpwm0: pwm@3000000 {
 		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
 		#pwm-cells = <3>;
diff --git a/src/arm64/ti/k3-am65-mcu.dtsi b/src/arm64/ti/k3-am65-mcu.dtsi
index ecd7356f33..6ff3ccc39f 100644
--- a/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/src/arm64/ti/k3-am65-mcu.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM6 SoC Family MCU Domain peripherals
  *
- * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
diff --git a/src/arm64/ti/k3-am65-wakeup.dtsi b/src/arm64/ti/k3-am65-wakeup.dtsi
index f037b36243..37527890dd 100644
--- a/src/arm64/ti/k3-am65-wakeup.dtsi
+++ b/src/arm64/ti/k3-am65-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_wakeup {
diff --git a/src/arm64/ti/k3-am65.dtsi b/src/arm64/ti/k3-am65.dtsi
index 4d7b6155a7..c59baebc5a 100644
--- a/src/arm64/ti/k3-am65.dtsi
+++ b/src/arm64/ti/k3-am65.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM6 SoC Family
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/src/arm64/ti/k3-am652.dtsi b/src/arm64/ti/k3-am652.dtsi
index 0f22e00faa..cbb3caaf82 100644
--- a/src/arm64/ti/k3-am652.dtsi
+++ b/src/arm64/ti/k3-am652.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM65 SoC family in Dual core configuration
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "k3-am65.dtsi"
diff --git a/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi b/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
index 1d6cddb119..eed6fe70d2 100644
--- a/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/src/arm64/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2018-2021
  *
@@ -11,6 +11,7 @@
 
 #include "k3-am652.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
 
 / {
 	memory@80000000 {
@@ -40,8 +41,3 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
-
-&mcu_r5fss0 {
-	/* lock-step mode not supported on Basic boards */
-	ti,cluster-mode = <0>;
-};
diff --git a/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts b/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts
index c62549a4b4..c1faf9497b 100644
--- a/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts
+++ b/src/arm64/ti/k3-am6528-iot2050-basic-pg2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2018-2021
  *
@@ -17,6 +17,8 @@
 
 #include "k3-am6528-iot2050-basic-common.dtsi"
 #include "k3-am65-iot2050-common-pg2.dtsi"
+#include "k3-am65-iot2050-dp.dtsi"
+#include "k3-am65-iot2050-usb3.dtsi"
 
 / {
 	compatible = "siemens,iot2050-basic-pg2", "ti,am654";
diff --git a/src/arm64/ti/k3-am6528-iot2050-basic.dts b/src/arm64/ti/k3-am6528-iot2050-basic.dts
index 87928ff282..29a31891b3 100644
--- a/src/arm64/ti/k3-am6528-iot2050-basic.dts
+++ b/src/arm64/ti/k3-am6528-iot2050-basic.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2018-2021
  *
@@ -22,3 +22,8 @@
 	compatible = "siemens,iot2050-basic", "ti,am654";
 	model = "SIMATIC IOT2050 Basic";
 };
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
diff --git a/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
index 3be92c39ec..364c57b3b3 100644
--- a/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
+++ b/src/arm64/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.
  * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT
  * AM654 LCD EVM: https://www.ti.com/tool/TMDSLCD1EVM
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am654-base-board.dts b/src/arm64/ti/k3-am654-base-board.dts
index 822c288d27..aba0c52b12 100644
--- a/src/arm64/ti/k3-am654-base-board.dts
+++ b/src/arm64/ti/k3-am654-base-board.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -531,13 +531,13 @@
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 };
 
 &mcu_r5fss0_core1 {
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
 };
 
 &ospi0 {
diff --git a/src/arm64/ti/k3-am654-icssg2.dtso b/src/arm64/ti/k3-am654-icssg2.dtso
index ec8cf20ca3..0a6e75265b 100644
--- a/src/arm64/ti/k3-am654-icssg2.dtso
+++ b/src/arm64/ti/k3-am654-icssg2.dtso
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT overlay for IDK application board on AM654 EVM
  *
- * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am654-idk.dtso b/src/arm64/ti/k3-am654-idk.dtso
index 150428dfce..8bdb87fcbd 100644
--- a/src/arm64/ti/k3-am654-idk.dtso
+++ b/src/arm64/ti/k3-am654-idk.dtso
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT overlay for IDK application board on AM654 EVM
  *
- * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-am654-industrial-thermal.dtsi b/src/arm64/ti/k3-am654-industrial-thermal.dtsi
index 9021c73805..de5a2ed907 100644
--- a/src/arm64/ti/k3-am654-industrial-thermal.dtsi
+++ b/src/arm64/ti/k3-am654-industrial-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-am654-pcie-usb2.dtso b/src/arm64/ti/k3-am654-pcie-usb2.dtso
new file mode 100644
index 0000000000..c3cb752f8c
--- /dev/null
+++ b/src/arm64/ti/k3-am654-pcie-usb2.dtso
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for SERDES personality card: 2lane PCIe + USB2.0 Host on AM654 EVM
+ *
+ * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-am654-serdes.h>
+#include "k3-pinctrl.h"
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>,
+			  <&serdes0 AM654_SERDES_CMU_REFCLK>,
+			  <&serdes0 AM654_SERDES_RO_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 8>,
+				 <&k3_clks 153 4>,
+				 <&k3_clks 153 4>;
+	status = "okay";
+};
+
+&serdes1 {
+	assigned-clocks = <&serdes1 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&serdes0 AM654_SERDES_RO_REFCLK>;
+	status = "okay";
+};
+
+&pcie0_rc {
+	num-lanes = <2>;
+	phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+	reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&main_pmx0 {
+       usb0_pins_default: usb0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
+		>;
+	};
+};
+
+&dwc3_0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "host";
+};
diff --git a/src/arm64/ti/k3-am654-pcie-usb3.dtso b/src/arm64/ti/k3-am654-pcie-usb3.dtso
new file mode 100644
index 0000000000..333e423e8b
--- /dev/null
+++ b/src/arm64/ti/k3-am654-pcie-usb3.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for SERDES personality card: 1lane PCIe + USB3.0 DRD on AM654 EVM
+ *
+ * Copyright (C) 2018-2024 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-am654-serdes.h>
+
+#include "k3-pinctrl.h"
+
+&serdes1 {
+	status = "okay";
+};
+
+&pcie1_rc {
+	num-lanes = <1>;
+	phys = <&serdes1 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy0";
+	reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&main_pmx0 {
+	usb0_pins_default: usb0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
+		>;
+	};
+};
+
+&serdes0 {
+	status = "okay";
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	assigned-clock-parents = <&k3_clks 151 4>,      /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+	<&k3_clks 151 8>;      /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+	phys = <&serdes0 PHY_TYPE_USB3 0>;
+	phy-names = "usb3-phy";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+};
+
+&usb0_phy {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-am654.dtsi b/src/arm64/ti/k3-am654.dtsi
index 888567b921..bb77c84547 100644
--- a/src/arm64/ti/k3-am654.dtsi
+++ b/src/arm64/ti/k3-am654.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for AM6 SoC family in Quad core configuration
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "k3-am65.dtsi"
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi b/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
index 3864ec54e3..ae842b85b7 100644
--- a/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2018-2021
  *
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts b/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts
index bd6f2e696e..cc619bbec1 100644
--- a/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2018-2023
  *
@@ -15,17 +15,14 @@
 
 #include "k3-am6548-iot2050-advanced-common.dtsi"
 #include "k3-am65-iot2050-common-pg2.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
+#include "k3-am65-iot2050-dp.dtsi"
 
 / {
 	compatible = "siemens,iot2050-advanced-m2", "ti,am654";
 	model = "SIMATIC IOT2050 Advanced M2";
 };
 
-&mcu_r5fss0 {
-	/* lock-step mode not supported on this board */
-	ti,cluster-mode = <0>;
-};
-
 &main_pmx0 {
 	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
@@ -96,16 +93,3 @@
 &pcie1_rc {
 	status = "disabled";
 };
-
-&dwc3_0 {
-	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
-				 <&k3_clks 151 9>;  /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
-	/delete-property/ phys;
-	/delete-property/ phy-names;
-};
-
-&usb0 {
-	maximum-speed = "high-speed";
-	/delete-property/ snps,dis-u1-entry-quirk;
-	/delete-property/ snps,dis-u2-entry-quirk;
-};
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts b/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts
index f00dc86d01..ec721275e8 100644
--- a/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) Siemens AG, 2018-2021
+ * Copyright (c) Siemens AG, 2018-2023
  *
  * Authors:
  *   Le Jin <le.jin@siemens.com>
@@ -17,13 +17,11 @@
 
 #include "k3-am6548-iot2050-advanced-common.dtsi"
 #include "k3-am65-iot2050-common-pg2.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
+#include "k3-am65-iot2050-dp.dtsi"
+#include "k3-am65-iot2050-usb3.dtsi"
 
 / {
 	compatible = "siemens,iot2050-advanced-pg2", "ti,am654";
 	model = "SIMATIC IOT2050 Advanced PG2";
 };
-
-&mcu_r5fss0 {
-	/* lock-step mode not supported on this board */
-	ti,cluster-mode = <0>;
-};
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced-sm.dts b/src/arm64/ti/k3-am6548-iot2050-advanced-sm.dts
new file mode 100644
index 0000000000..b829f4bcab
--- /dev/null
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced-sm.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Siemens AG, 2023
+ *
+ * Authors:
+ *   Baocheng Su <baocheng.su@siemens.com>
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Huaqian Li <huaqian.li@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 SM variant, Product Generation 2
+ * 4 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-sm", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced SM";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	aliases {
+		spi1 = &main_spi0;
+	};
+
+	leds {
+		pinctrl-0 = <&leds_pins_default>, <&user1_led_pins>;
+
+		led-2 {
+			gpios = <&wkup_gpio0 52 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			gpios = <&wkup_gpio0 53 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&main_pmx0 {
+	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01d8, PIN_OUTPUT, 7)  /* (AH12) GPIO1_22 */
+		>;
+	};
+
+	main_spi0_pins: main-spi0-default-pins  {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
+			AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
+			AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
+			AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
+		>;
+	};
+};
+
+&main_pmx1 {
+	asic_spi_mux_ctrl_pin: asic-spi-mux-ctrl-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_OUTPUT, 7)  /* (D21) GPIO1_86 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	user1_led_pins: user1-led-default-pins {
+		pinctrl-single,pins = <
+			/* (AB1) WKUP_UART0_RXD:WKUP_GPIO0_52, as USER 1 led red */
+			AM65X_WKUP_IOPAD(0x00a0, PIN_OUTPUT, 7)
+			/* (AB5) WKUP_UART0_TXD:WKUP_GPIO0_53, as USER 1 led green */
+			AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 7)
+		>;
+	};
+
+	soc_asic_pins: soc-asic-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)  /* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)  /* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x004c, PIN_INPUT, 7)  /* (P1) WKUP_GPIO0_31 */
+		>;
+	};
+};
+
+&main_gpio0 {
+	gpio-line-names = "main_gpio0-base";
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&cp2102n_reset_pin_default>,
+		<&main_pcie_enable_pins_default>,
+		<&asic_spi_mux_ctrl_pin>;
+	gpio-line-names =
+		/* 0..9 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "", "", "", "CP2102N-RESET", "", "", "", "", "",
+		/* 30..39 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 40..49 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 50..59 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 60..69 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 70..79 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 80..86 */
+		"", "", "", "", "", "", "ASIC-spi-mux-ctrl";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>,
+		<&soc_asic_pins>;
+	gpio-line-names =
+		/* 0..9 */
+		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "", "", "", "", "USER-button", "", "", "","ASIC-gpio-0",
+		/* 30..31 */
+		"ASIC-gpio-1", "ASIC-gpio-2";
+};
+
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins>;
+
+	#address-cells = <1>;
+	#size-cells= <0>;
+};
+
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+};
+
+&main_i2c3 {
+	accelerometer: lsm6dso@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&dss {
+	status = "disabled";
+};
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+};
+
+&serdes1 {
+	status = "disabled";
+};
+
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_pins_default>;
+
+	num-lanes = <1>;
+	phys = <&serdes0 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy0";
+	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
diff --git a/src/arm64/ti/k3-am6548-iot2050-advanced.dts b/src/arm64/ti/k3-am6548-iot2050-advanced.dts
index 077f165bdc..649652a540 100644
--- a/src/arm64/ti/k3-am6548-iot2050-advanced.dts
+++ b/src/arm64/ti/k3-am6548-iot2050-advanced.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) Siemens AG, 2018-2021
  *
@@ -17,6 +17,7 @@
 
 #include "k3-am6548-iot2050-advanced-common.dtsi"
 #include "k3-am65-iot2050-common-pg1.dtsi"
+#include "k3-am65-iot2050-arduino-connector.dtsi"
 
 / {
 	compatible = "siemens,iot2050-advanced", "ti,am654";
diff --git a/src/arm64/ti/k3-am68-sk-base-board.dts b/src/arm64/ti/k3-am68-sk-base-board.dts
index d0cfdeac21..d743f023cd 100644
--- a/src/arm64/ti/k3-am68-sk-base-board.dts
+++ b/src/arm64/ti/k3-am68-sk-base-board.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Base Board: https://www.ti.com/lit/zip/SPRR463
  */
@@ -169,6 +169,13 @@
 			};
 		};
 	};
+
+	csi_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp3 1 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
 };
 
 &main_pmx0 {
@@ -186,6 +193,13 @@
 		>;
 	};
 
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ac, PIN_INPUT, 13) /* (AC25) MCASP0_AXR15.I2C1_SCL */
+			J721S2_IOPAD(0x0b0, PIN_INPUT, 13) /* (AD26) MCASP1_AXR3.I2C1_SDA */
+		>;
+	};
+
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
@@ -431,6 +445,42 @@
 	};
 };
 
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	status = "okay";
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn",
+				  "IO_EXP_CSI2_EXP_RSTz","CSI0_B_GPIO1",
+				  "CSI1_B_GPIO1";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		cam0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		cam1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+	};
+};
+
 &main_i2c4 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/src/arm64/ti/k3-am68-sk-som.dtsi b/src/arm64/ti/k3-am68-sk-som.dtsi
index 20861a0a46..0f4a5da0eb 100644
--- a/src/arm64/ti/k3-am68-sk-som.dtsi
+++ b/src/arm64/ti/k3-am68-sk-som.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -209,51 +209,51 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
 
 &c71_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
 
 &c71_1 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
 	memory-region = <&c71_1_dma_memory_region>,
 			<&c71_1_memory_region>;
 };
diff --git a/src/arm64/ti/k3-am69-sk.dts b/src/arm64/ti/k3-am69-sk.dts
index 8da5915798..50de2a448a 100644
--- a/src/arm64/ti/k3-am69-sk.dts
+++ b/src/arm64/ti/k3-am69-sk.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Design Files: https://www.ti.com/lit/zip/SPRR466
  * TRM: https://www.ti.com/lit/zip/spruj52
@@ -33,6 +33,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 32G RAM */
 		reg = <0x00 0x80000000 0x00 0x80000000>,
 		      <0x08 0x80000000 0x07 0x80000000>;
@@ -321,6 +322,38 @@
 			};
 		};
 	};
+
+	csi_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver3: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver4: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
 };
 
 &main_pmx0 {
@@ -340,6 +373,13 @@
 		>;
 	};
 
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0ac, PIN_INPUT_PULLUP, 13) /* (AE34) MCASP0_AXR15.I2C1_SCL */
+			J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 13) /* (AL33) MCASP1_AXR3.I2C1_SDA */
+		>;
+	};
+
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -429,6 +469,40 @@
 			J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */
 		>;
 	};
+
+	main_mcan6_pins_default: main-mcan6-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x098, PIN_INPUT, 0) /* (AH36) MCAN6_RX */
+			J784S4_IOPAD(0x094, PIN_OUTPUT, 0) /* (AG35) MCAN6_TX */
+		>;
+	};
+
+	main_mcan7_pins_default: main-mcan7-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0A0, PIN_INPUT, 0) /* (AD34) MCAN7_RX */
+			J784S4_IOPAD(0x09C, PIN_OUTPUT, 0) /* (AF35) MCAN7_TX */
+		>;
+	};
+
+};
+
+&wkup_pmx0 {
+	bootph-all;
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
+			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
+		>;
+	};
 };
 
 &wkup_pmx2 {
@@ -525,6 +599,21 @@
 			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */
 		>;
 	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */
+			J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0)/* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
 };
 
 &wkup_pmx3 {
@@ -646,7 +735,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <83 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ti,primary-pmic;
@@ -774,6 +863,42 @@
 	};
 };
 
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	exp2: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CSI_VIO_SEL", "CSI_MUX_SEL_2", "CSI2_RSTz",
+				  "IO_EXP_CAM0_GPIO1", "IO_EXP_CAM1_GPIO1";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		cam0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		cam1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+	};
+};
+
 &main_sdhci0 {
 	bootph-all;
 	/* eMMC */
@@ -822,77 +947,77 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
 
 &main_r5fss2_core0 {
-	mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core0>;
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
 	memory-region = <&main_r5fss2_core0_dma_memory_region>,
 			<&main_r5fss2_core0_memory_region>;
 };
 
 &main_r5fss2_core1 {
-	mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core1>;
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
 	memory-region = <&main_r5fss2_core1_dma_memory_region>,
 			<&main_r5fss2_core1_memory_region>;
 };
 
 &c71_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
 
 &c71_1 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
 	memory-region = <&c71_1_dma_memory_region>,
 			<&c71_1_memory_region>;
 };
 
 &c71_2 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster5>, <&mbox_c71_2>;
+	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
 	memory-region = <&c71_2_dma_memory_region>,
 			<&c71_2_memory_region>;
 };
 
 &c71_3 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster5>, <&mbox_c71_3>;
+	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
 	memory-region = <&c71_3_dma_memory_region>,
 			<&c71_3_memory_region>;
 };
@@ -918,13 +1043,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_vout0_pins_default>;
 	assigned-clocks = <&k3_clks 218 2>,
-			  <&k3_clks 218 5>,
-			  <&k3_clks 218 14>,
-			  <&k3_clks 218 18>;
+			  <&k3_clks 218 5>;
 	assigned-clock-parents = <&k3_clks 218 3>,
-				 <&k3_clks 218 7>,
-				 <&k3_clks 218 16>,
-				 <&k3_clks 218 22>;
+				 <&k3_clks 218 7>;
 };
 
 &serdes_wiz4 {
@@ -992,3 +1113,93 @@
 		};
 	};
 };
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan6_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan7 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan7_pins_default>;
+	phys = <&transceiver4>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			bootph-all;
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-pre-ram;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/ti/k3-j7200-common-proc-board.dts b/src/arm64/ti/k3-j7200-common-proc-board.dts
index cee2b4b0eb..6593c5da82 100644
--- a/src/arm64/ti/k3-j7200-common-proc-board.dts
+++ b/src/arm64/ti/k3-j7200-common-proc-board.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -88,27 +88,56 @@
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
 	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 58 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux0 1>;
+	};
 };
 
 &wkup_pmx0 {
+};
+
+&wkup_pmx2 {
 	mcu_uart0_pins_default: mcu-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
-			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
-			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
-			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
 		>;
 	};
 
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
-			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
 		>;
 	};
-};
 
-&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
@@ -138,6 +167,33 @@
 			J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 		>;
 	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x54, PIN_INPUT, 0) /* (A17) MCU_MCAN0_RX */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (A16) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x6c, PIN_INPUT, 0) /* (B16) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (D13) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x58, PIN_INPUT, 7) /* (B18) WKUP_GPIO0_0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 7) /* (B17) MCU_SPI0_D1 */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x60, PIN_INPUT, 7) /* (D14) WKUP_GPIO0_2 */
+		>;
+	};
 };
 
 &main_pmx0 {
@@ -189,6 +245,13 @@
 			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
 		>;
 	};
+
+	main_mcan3_pins_default: main-mcan3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x3c, PIN_INPUT, 0) /* (W16) MCAN3_RX */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 0) /* (Y21) MCAN3_TX */
+		>;
+	};
 };
 
 &main_pmx1 {
@@ -210,7 +273,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_uart0_pins_default>;
-	clock-frequency = <96000000>;
 };
 
 &main_uart0 {
@@ -382,15 +444,30 @@
 };
 
 &pcie1_rc {
+	status = "okay";
 	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
 	phys = <&serdes0_pcie_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <2>;
 };
 
-&pcie1_ep {
-	phys = <&serdes0_pcie_link>;
-	phy-names = "pcie-phy";
-	num-lanes = <2>;
-	status = "disabled";
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan3_pins_default>;
+	phys = <&transceiver3>;
 };
diff --git a/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso
index 32d905235e..6432ca08ee 100644
--- a/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso
+++ b/src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
  * J7200 board.
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-j7200-main.dtsi b/src/arm64/ti/k3-j7200-main.dtsi
index da67bf8fe7..657f9cc9f4 100644
--- a/src/arm64/ti/k3-j7200-main.dtsi
+++ b/src/arm64/ti/k3-j7200-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J7200 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 / {
@@ -33,10 +33,11 @@
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
 		serdes_ln_ctrl: mux-controller@4080 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
+			reg = <0x4080 0x20>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */
 		};
 
 		cpsw0_phy_gmii_sel: phy@4044 {
@@ -47,9 +48,10 @@
 		};
 
 		usb_serdes_mux: mux-controller@4000 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
+			reg = <0x4000 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
 		};
 	};
 
@@ -399,7 +401,7 @@
 
 	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
 	main_timerio_input: pinctrl@104200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x104200 0x0 0x50>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -408,7 +410,7 @@
 
 	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
 	main_timerio_output: pinctrl@104280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x104280 0x0 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -416,7 +418,7 @@
 	};
 
 	main_pmx0: pinctrl@11c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c000 0x00 0x10c>;
 		#pinctrl-cells = <1>;
@@ -425,7 +427,7 @@
 	};
 
 	main_pmx1: pinctrl@11c11c {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c11c 0x00 0xc>;
 		#pinctrl-cells = <1>;
@@ -770,26 +772,7 @@
 		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
 			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
 		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
-	};
-
-	pcie1_ep: pcie-ep@2910000 {
-		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
-		reg = <0x00 0x02910000 0x00 0x1000>,
-		      <0x00 0x02917000 0x00 0x400>,
-		      <0x00 0x0d800000 0x00 0x00800000>,
-		      <0x00 0x18000000 0x00 0x08000000>;
-		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
-		interrupt-names = "link_state";
-		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
-		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
-		max-link-speed = <3>;
-		num-lanes = <4>;
-		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 240 6>;
-		clock-names = "fck";
-		max-functions = /bits/ 8 <6>;
-		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
-		dma-coherent;
+		status = "disabled";
 	};
 
 	usbss0: cdns-usb@4104000 {
@@ -895,6 +878,276 @@
 		status = "disabled";
 	};
 
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>, <&k3_clks 156 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>, <&k3_clks 158 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>, <&k3_clks 160 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 161 0>, <&k3_clks 161 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>, <&k3_clks 163 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>, <&k3_clks 164 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>, <&k3_clks 165 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>, <&k3_clks 166 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 167 0>, <&k3_clks 167 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 168 0>, <&k3_clks 168 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 169 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 169 0>, <&k3_clks 169 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 170 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 170 0>, <&k3_clks 170 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 171 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 171 0>, <&k3_clks 171 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 150 0>, <&k3_clks 150 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 0>, <&k3_clks 151 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>, <&k3_clks 152 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>, <&k3_clks 153 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
 	main_spi0: spi@2100000 {
 		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
 		reg = <0x00 0x02100000 0x00 0x400>;
diff --git a/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi b/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
index 60b26374ae..7cf21c9995 100644
--- a/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j7200-mcu-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
  *
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu_wakeup {
@@ -192,7 +192,7 @@
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
 	mcu_timerio_input: pinctrl@40f04200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x40f04200 0x0 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -202,7 +202,7 @@
 
 	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
 	mcu_timerio_output: pinctrl@40f04280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x40f04280 0x0 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -211,7 +211,7 @@
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c000 0x00 0x34>;
 		#pinctrl-cells = <1>;
@@ -220,7 +220,7 @@
 	};
 
 	wkup_pmx1: pinctrl@4301c038 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x8>;
 		#pinctrl-cells = <1>;
@@ -229,7 +229,7 @@
 	};
 
 	wkup_pmx2: pinctrl@4301c068 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0xec>;
 		#pinctrl-cells = <1>;
@@ -238,7 +238,7 @@
 	};
 
 	wkup_pmx3: pinctrl@4301c174 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c174 0x00 0x20>;
 		#pinctrl-cells = <1>;
@@ -518,17 +518,18 @@
 		status = "disabled";
 	};
 
-	fss: syscon@47000000 {
-		compatible = "syscon", "simple-mfd";
+	fss: bus@47000000 {
+		compatible = "simple-bus";
 		reg = <0x00 0x47000000 0x00 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		hbmc_mux: hbmc-mux {
-			compatible = "mmio-mux";
+		hbmc_mux: mux-controller@47000004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+			mux-reg-masks = <0x0 0x2>; /* HBMC select */
 		};
 
 		hbmc: hyperbus@47034000 {
@@ -655,4 +656,34 @@
 		ti,esm-pins = <95>;
 		bootph-pre-ram;
 	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 172 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 172 0>, <&k3_clks 172 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 173 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 173 0>, <&k3_clks 173 2>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
 };
diff --git a/src/arm64/ti/k3-j7200-som-p0.dtsi b/src/arm64/ti/k3-j7200-som-p0.dtsi
index ea47f10d39..7e6a584ac6 100644
--- a/src/arm64/ti/k3-j7200-som-p0.dtsi
+++ b/src/arm64/ti/k3-j7200-som-p0.dtsi
@@ -1,10 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+
 #include "k3-j7200.dtsi"
 
 / {
@@ -80,6 +82,25 @@
 			no-map;
 		};
 	};
+
+	mux0: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	mux1: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver0: can-phy0 {
+		/* standby pin has been grounded by default */
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
 };
 
 &wkup_pmx0 {
@@ -142,6 +163,13 @@
 			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
 		>;
 	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x24, PIN_INPUT, 0) /* (V20) MCAN0_RX */
+			J721E_IOPAD(0x20, PIN_OUTPUT, 0) /* (V18) MCAN0_TX */
+		>;
+	};
 };
 
 &hbmc {
@@ -222,25 +250,25 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
@@ -478,3 +506,10 @@
 		};
 	};
 };
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	pinctrl-names = "default";
+	phys = <&transceiver0>;
+};
diff --git a/src/arm64/ti/k3-j7200-thermal.dtsi b/src/arm64/ti/k3-j7200-thermal.dtsi
index e7e3a643a6..2d22a95a6f 100644
--- a/src/arm64/ti/k3-j7200-thermal.dtsi
+++ b/src/arm64/ti/k3-j7200-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-j7200.dtsi b/src/arm64/ti/k3-j7200.dtsi
index ef73e6d7e8..d411911fdf 100644
--- a/src/arm64/ti/k3-j7200.dtsi
+++ b/src/arm64/ti/k3-j7200.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J7200 SoC Family
  *
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/src/arm64/ti/k3-j721e-beagleboneai64.dts b/src/arm64/ti/k3-j721e-beagleboneai64.dts
index 2f954729f3..a2925555fe 100644
--- a/src/arm64/ti/k3-j721e-beagleboneai64.dts
+++ b/src/arm64/ti/k3-j721e-beagleboneai64.dts
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * https://beagleboard.org/ai-64
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
- * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Jason Kridner, BeagleBoard.org Foundation
+ * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation
  */
 
 /dts-v1/;
@@ -936,58 +936,58 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
 
 &c66_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
 	memory-region = <&c66_0_dma_memory_region>,
 			<&c66_0_memory_region>;
 };
 
 &c66_1 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
 	memory-region = <&c66_1_dma_memory_region>,
 			<&c66_1_memory_region>;
 };
 
 &c71_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
diff --git a/src/arm64/ti/k3-j721e-common-proc-board.dts b/src/arm64/ti/k3-j721e-common-proc-board.dts
index fe5207ac7d..8230d53cd6 100644
--- a/src/arm64/ti/k3-j721e-common-proc-board.dts
+++ b/src/arm64/ti/k3-j721e-common-proc-board.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2019-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Product Link: https://www.ti.com/tool/J721EXCPXEVM
  */
diff --git a/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso b/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso
index 6a7d37575d..f84aa9f945 100644
--- a/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso
+++ b/src/arm64/ti/k3-j721e-evm-gesi-exp-board.dtso
@@ -1,11 +1,11 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT Overlay for CPSW9G in RGMII mode using J7 GESI EXP BRD board with
  * J721E board.
  *
  * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso b/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso
index 0c82a13b65..4062709d65 100644
--- a/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso
+++ b/src/arm64/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -1,11 +1,11 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the
  * J7 common processor board.
  *
  * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso
index d4c51ffc3d..8376fa4b6e 100644
--- a/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso
+++ b/src/arm64/ti/k3-j721e-evm-quad-port-eth-exp.dtso
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
  * J721E board.
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-j721e-main.dtsi b/src/arm64/ti/k3-j721e-main.dtsi
index 2569b4c08f..c7eafbc862 100644
--- a/src/arm64/ti/k3-j721e-main.dtsi
+++ b/src/arm64/ti/k3-j721e-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J721E SoC Family Main Domain peripherals
  *
- * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/phy/phy-ti.h>
@@ -45,15 +45,15 @@
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
 
 		serdes_ln_ctrl: mux-controller@4080 {
-			compatible = "mmio-mux";
-			reg = <0x00004080 0x50>;
+			compatible = "reg-mux";
+			reg = <0x4080 0x50>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
-					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
-					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
-					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
-					/* SERDES4 lane0/1/2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
+					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
+					<0x30 0x3>, <0x34 0x3>, /* SERDES3 lane0/1 select */
+					<0x40 0x3>, <0x44 0x3>, /* SERDES4 lane0/1 select */
+					<0x48 0x3>, <0x4c 0x3>; /* SERDES4 lane2/3 select */
 			idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
 				      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
 				      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
@@ -70,10 +70,11 @@
 		};
 
 		usb_serdes_mux: mux-controller@4000 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
+			reg = <0x4000 0x20>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
-					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+			mux-reg-masks = <0x0 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x10 0x8000000>; /* USB1 to SERDES1/2 mux */
 		};
 
 		ehrpwm_tbclk: clock-controller@4140 {
@@ -572,6 +573,128 @@
 		pinctrl-single,function-mask = <0x0000001f>;
 	};
 
+	ti_csi2rx0: ticsi2rx@4500000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x0 0x4500000 0x0 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_udmap 0x4940>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@4504000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x0 0x4504000 0x0 0x1000>;
+			clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+				<&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx1: ticsi2rx@4510000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x0 0x4510000 0x0 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_udmap 0x4960>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx1: csi-bridge@4514000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x0 0x4514000 0x0 0x1000>;
+			clocks = <&k3_clks 27 2>, <&k3_clks 27 0>, <&k3_clks 27 2>,
+				 <&k3_clks 27 2>, <&k3_clks 27 3>, <&k3_clks 27 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				      "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy1>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi1_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi1_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi1_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi1_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi1_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@4580000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x0 0x4580000 0x0 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy1: phy@4590000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x0 0x4590000 0x0 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 	serdes_wiz0: wiz@5000000 {
 		compatible = "ti,j721e-wiz-16g";
 		#address-cells = <1>;
diff --git a/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index a74912d9e4..4618b697fb 100644
--- a/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
  *
- * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu_wakeup {
@@ -353,9 +353,9 @@
 
 		hbmc_mux: mux-controller@47000004 {
 			compatible = "reg-mux";
-			reg = <0x00 0x47000004 0x00 0x2>;
+			reg = <0x00 0x47000004 0x00 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+			mux-reg-masks = <0x0 0x2>; /* HBMC select */
 		};
 
 		hbmc: hyperbus@47034000 {
diff --git a/src/arm64/ti/k3-j721e-sk-csi2-dual-imx219.dtso b/src/arm64/ti/k3-j721e-sk-csi2-dual-imx219.dtso
new file mode 100644
index 0000000000..47bb5480b5
--- /dev/null
+++ b/src/arm64/ti/k3-j721e-sk-csi2-dual-imx219.dtso
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for dual RPi Camera V2.1 (Sony IMX219) interfaced with CSI2
+ * on J721E SK, AM68 SK or AM69-SK board.
+ * https://datasheets.raspberrypi.org/camera/camera-v2-schematic.pdf
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	clk_imx219_fixed: imx219-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&csi_mux {
+	idle-state = <1>;
+};
+
+/* CAM0 I2C */
+&cam0_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	imx219_0: imx219-0@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_imx219_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				link-frequencies = /bits/ 64 <456000000>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+/* CAM1 I2C */
+&cam1_i2c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	imx219_1: imx219-1@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_imx219_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam1: endpoint {
+				remote-endpoint = <&csi2rx1_in_sensor>;
+				link-frequencies = /bits/ 64 <456000000>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		csi0_port1: port@1 {
+			reg = <1>;
+			status = "disabled";
+		};
+
+		csi0_port2: port@2 {
+			reg = <2>;
+			status = "disabled";
+		};
+
+		csi0_port3: port@3 {
+			reg = <3>;
+			status = "disabled";
+		};
+
+		csi0_port4: port@4 {
+			reg = <4>;
+			status = "disabled";
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&cdns_csi2rx1 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx1_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam1>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		csi1_port1: port@1 {
+			reg = <1>;
+			status = "disabled";
+		};
+
+		csi1_port2: port@2 {
+			reg = <2>;
+			status = "disabled";
+		};
+
+		csi1_port3: port@3 {
+			reg = <3>;
+			status = "disabled";
+		};
+
+		csi1_port4: port@4 {
+			reg = <4>;
+			status = "disabled";
+		};
+	};
+};
+
+&dphy1 {
+	status = "okay";
+};
+
+&ti_csi2rx1 {
+	status = "okay";
+};
diff --git a/src/arm64/ti/k3-j721e-sk.dts b/src/arm64/ti/k3-j721e-sk.dts
index 188dfe291a..0c4575ad8d 100644
--- a/src/arm64/ti/k3-j721e-sk.dts
+++ b/src/arm64/ti/k3-j721e-sk.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM
  */
@@ -286,6 +286,15 @@
 			};
 		};
 	};
+
+	csi_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&main_gpio0 88 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_csi_mux_sel_pins_default>;
+	};
 };
 
 &main_pmx0 {
@@ -352,6 +361,12 @@
 		>;
 	};
 
+	main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */
+		>;
+	};
+
 	dp0_pins_default: dp0-default-pins {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
@@ -574,7 +589,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ti,primary-pmic;
@@ -651,7 +666,7 @@
 		reg = <0x4c>;
 		system-power-controller;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		buck1234-supply = <&vsys_3v3>;
@@ -858,14 +873,14 @@
 		reg = <0x70>;
 
 		/* CSI0 I2C */
-		i2c@0 {
+		cam0_i2c: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
 		/* CSI1 I2C */
-		i2c@1 {
+		cam1_i2c: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
@@ -1168,58 +1183,58 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
 
 &c66_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
 	memory-region = <&c66_0_dma_memory_region>,
 			<&c66_0_memory_region>;
 };
 
 &c66_1 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
 	memory-region = <&c66_1_dma_memory_region>,
 			<&c66_1_memory_region>;
 };
 
 &c71_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
diff --git a/src/arm64/ti/k3-j721e-som-p0.dtsi b/src/arm64/ti/k3-j721e-som-p0.dtsi
index a75611eec7..1fae6495db 100644
--- a/src/arm64/ti/k3-j721e-som-p0.dtsi
+++ b/src/arm64/ti/k3-j721e-som-p0.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2019-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Product Link: https://www.ti.com/tool/J721EXSOMXEVM
  */
@@ -549,58 +549,58 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
 
 &c66_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
 	memory-region = <&c66_0_dma_memory_region>,
 			<&c66_0_memory_region>;
 };
 
 &c66_1 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
 	memory-region = <&c66_1_dma_memory_region>,
 			<&c66_1_memory_region>;
 };
 
 &c71_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
diff --git a/src/arm64/ti/k3-j721e-thermal.dtsi b/src/arm64/ti/k3-j721e-thermal.dtsi
index c252327900..927f7614ae 100644
--- a/src/arm64/ti/k3-j721e-thermal.dtsi
+++ b/src/arm64/ti/k3-j721e-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-j721e.dtsi b/src/arm64/ti/k3-j721e.dtsi
index a200810df5..5a72c518ce 100644
--- a/src/arm64/ti/k3-j721e.dtsi
+++ b/src/arm64/ti/k3-j721e.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J721E SoC Family
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/src/arm64/ti/k3-j721s2-common-proc-board.dts b/src/arm64/ti/k3-j721s2-common-proc-board.dts
index c6b85bbf9a..c5a0b7cbb1 100644
--- a/src/arm64/ti/k3-j721s2-common-proc-board.dts
+++ b/src/arm64/ti/k3-j721s2-common-proc-board.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM
  */
@@ -147,6 +147,13 @@
 		>;
 	};
 
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
+			J721S2_IOPAD(0x018, PIN_INPUT, 8) /* (W23) MCAN14_RX.I2C5_SDA */
+		>;
+	};
+
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
@@ -190,8 +197,6 @@
 &wkup_pmx2 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
 		>;
@@ -356,6 +361,24 @@
 	};
 };
 
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
+				  "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO2",
+				  "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
+				  "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
+	};
+};
+
 &main_sdhci0 {
 	/* eMMC */
 	status = "okay";
diff --git a/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso b/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso
index b78feea31b..1be28283c7 100644
--- a/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso
+++ b/src/arm64/ti/k3-j721s2-evm-gesi-exp-board.dtso
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT Overlay for MAIN CPSW2G using GESI Expansion Board with J7 common processor board.
  *
  * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso b/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso
index 43568eb67d..5ff390915b 100644
--- a/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso
+++ b/src/arm64/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -1,11 +1,11 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /**
  * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
  * J7 common processor board.
  *
  * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/src/arm64/ti/k3-j721s2-main.dtsi b/src/arm64/ti/k3-j721s2-main.dtsi
index ea7f2b2ab1..b70c8615e3 100644
--- a/src/arm64/ti/k3-j721s2-main.dtsi
+++ b/src/arm64/ti/k3-j721s2-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J721S2 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/phy/phy-cadence.h>
@@ -45,7 +45,7 @@
 		ranges = <0x00 0x00 0x00104000 0x18000>;
 
 		usb_serdes_mux: mux-controller@0 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
 			reg = <0x0 0x4>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
@@ -58,11 +58,11 @@
 		};
 
 		serdes_ln_ctrl: mux-controller@80 {
-			compatible = "mmio-mux";
+			compatible = "reg-mux";
 			reg = <0x80 0x10>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
-					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>; /* SERDES0 lane2/3 select */
 		};
 
 		ehrpwm_tbclk: clock-controller@140 {
@@ -716,6 +716,14 @@
 		status = "disabled";
 	};
 
+	vpu: video-codec@4210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 179 2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	main_sdhci0: mmc@4f80000 {
 		compatible = "ti,j721e-sdhci-8bit";
 		reg = <0x00 0x04f80000 0x00 0x1000>,
@@ -1122,7 +1130,6 @@
 			ti,sci-dev-id = <225>;
 			ti,sci-rm-range-rchan = <0x21>;
 			ti,sci-rm-range-tchan = <0x22>;
-			status = "disabled";
 		};
 
 		cpts@310d0000 {
@@ -1233,6 +1240,128 @@
 		};
 	};
 
+	ti_csi2rx0: ticsi2rx@4500000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04500000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4940 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@4504000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04504000 0x00 0x1000>;
+			clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>,
+				<&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx1: ticsi2rx@4510000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04510000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4960 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx1: csi-bridge@4514000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04514000 0x00 0x1000>;
+			clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>,
+				<&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy1>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi1_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi1_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi1_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi1_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi1_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@4580000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x04580000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy1: phy@4590000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x04590000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 	serdes_wiz0: wiz@5060000 {
 		compatible = "ti,j721s2-wiz-10g";
 		#address-cells = <1>;
diff --git a/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi b/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
index 80aa33c58a..eaf7f70944 100644
--- a/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals
  *
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu_wakeup {
@@ -663,7 +663,7 @@
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x0 0x350>,
 		      <0x00 0x42050000 0x0 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git a/src/arm64/ti/k3-j721s2-som-p0.dtsi b/src/arm64/ti/k3-j721s2-som-p0.dtsi
index da3237b23b..623c842152 100644
--- a/src/arm64/ti/k3-j721s2-som-p0.dtsi
+++ b/src/arm64/ti/k3-j721s2-som-p0.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * SoM: https://www.ti.com/lit/zip/sprr439
  *
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -504,51 +504,51 @@
 };
 
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
 };
 
 &mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
 	memory-region = <&main_r5fss0_core0_dma_memory_region>,
 			<&main_r5fss0_core0_memory_region>;
 };
 
 &main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
 	memory-region = <&main_r5fss0_core1_dma_memory_region>,
 			<&main_r5fss0_core1_memory_region>;
 };
 
 &main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
 	memory-region = <&main_r5fss1_core0_dma_memory_region>,
 			<&main_r5fss1_core0_memory_region>;
 };
 
 &main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
 	memory-region = <&main_r5fss1_core1_dma_memory_region>,
 			<&main_r5fss1_core1_memory_region>;
 };
 
 &c71_0 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
 
 &c71_1 {
 	status = "okay";
-	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
 	memory-region = <&c71_1_dma_memory_region>,
 			<&c71_1_memory_region>;
 };
diff --git a/src/arm64/ti/k3-j721s2-thermal.dtsi b/src/arm64/ti/k3-j721s2-thermal.dtsi
index f7b1a15b8f..e3ef61c165 100644
--- a/src/arm64/ti/k3-j721s2-thermal.dtsi
+++ b/src/arm64/ti/k3-j721s2-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-j721s2.dtsi b/src/arm64/ti/k3-j721s2.dtsi
index 1f636acd4e..be4502fe1c 100644
--- a/src/arm64/ti/k3-j721s2.dtsi
+++ b/src/arm64/ti/k3-j721s2.dtsi
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J721S2 SoC Family
  *
  * TRM (SPRUJ28 NOVEMBER 2021): https://www.ti.com/lit/pdf/spruj28
  *
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  */
 
diff --git a/src/arm64/ti/k3-j722s-evm.dts b/src/arm64/ti/k3-j722s-evm.dts
new file mode 100644
index 0000000000..cee3a8661d
--- /dev/null
+++ b/src/arm64/ti/k3-j722s-evm.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree file for the J722S EVM
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Schematics: https://www.ti.com/lit/zip/sprr495
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-j722s.dtsi"
+
+/ {
+	compatible = "ti,j722s-evm", "ti,j722s";
+	model = "Texas Instruments J722S EVM";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	memory@80000000 {
+		/* 8G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000001 0x80000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-mmc1 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&exp1 15 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vdd_sd_dv: regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 70 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */
+			J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */
+		>;
+		bootph-all;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x01c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
+			J722S_IOPAD(0x01cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */
+		>;
+		bootph-all;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */
+			J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */
+			J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */
+			J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */
+			J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */
+			J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */
+			J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	mdio_pins_default: mdio-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
+			J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */
+			J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */
+			J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */
+			J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */
+			J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */
+			J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */
+			J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (L21) OSPI0_D4 */
+			J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (M26) OSPI0_D5 */
+			J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (N27) OSPI0_D6 */
+			J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (M27) OSPI0_D7 */
+			J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (L22) OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */
+			J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */
+			J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */
+			J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */
+			J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */
+			J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */
+			J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */
+			J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */
+			J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */
+			J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
+			J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
+			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
+		>;
+	};
+};
+
+&cpsw3g {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+	bootph-all;
+};
+
+&mcu_pmx0 {
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C7) WKUP_UART0_CTSn */
+			J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (C6) WKUP_UART0_RTSn */
+			J722S_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (D8) WKUP_UART0_RXD */
+			J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (D7) WKUP_UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0)	/* (C7) WKUP_I2C0_SCL */
+			J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0)	/* (C6) WKUP_I2C1_SDA */
+		>;
+		bootph-all;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by Device Manager firmware */
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+	bootph-all;
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+	bootph-all;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+	bootph-all;
+
+	exp1: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "TRC_MUX_SEL", "OSPI/ONAND_MUX_SEL",
+				  "MCASP1_FET_SEL", "CTRL_PM_I2C_OE#",
+				  "CSI_VIO_SEL", "USB2.0_MUX_SEL",
+				  "CSI01_MUX_SEL_2", "CSI23_MUX_SEL_2",
+				  "LMK1_OE1", "LMK1_OE0",
+				  "LMK2_OE0", "LMK2_OE1",
+				  "GPIO_RGMII1_RST#", "GPIO_AUD_RSTn",
+				  "GPIO_eMMC_RSTn", "GPIO_uSD_PWR_EN",
+				  "USER_LED2", "MCAN0_STB",
+				  "PCIe0_1L_RC_RSTz", "PCIe0_1L_PRSNT#",
+				  "ENET1_EXP_SPARE2", "ENET1_EXP_PWRDN",
+				  "PD_I2ENET1_I2CMUX_SELC_IRQ", "ENET1_EXP_RESETZ";
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x00 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+	bootph-all;
+};
diff --git a/src/arm64/ti/k3-j722s.dtsi b/src/arm64/ti/k3-j722s.dtsi
new file mode 100644
index 0000000000..c75744edb1
--- /dev/null
+++ b/src/arm64/ti/k3-j722s.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for J722S SoC Family
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-am62p5.dtsi"
+
+/ {
+	model = "Texas Instruments K3 J722S SoC";
+	compatible = "ti,j722s";
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_0 */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd80000 0x00 0x0fd80000 0x00 0x00080000>, /* GPU */
+			 <0x00 0x0fd20000 0x00 0x0fd20000 0x00 0x00000100>, /* JPEGENC0_CORE */
+			 <0x00 0x0fd20200 0x00 0x0fd20200 0x00 0x00000200>, /* JPEGENC0_CORE_MMU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x301C0000 0x00 0x301C0000 0x00 0x00001000>, /* DPHY-TX */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00080100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */
+			 <0x00 0x30220000 0x00 0x30220000 0x00 0x00010000>, /* DSS1 */
+			 <0x00 0x30270000 0x00 0x30270000 0x00 0x00010000>, /* DSI-base1 */
+			 <0x00 0x30500000 0x00 0x30500000 0x00 0x00100000>, /* DSI-base2 */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31200000 0x00 0x31200000 0x00 0x00040000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe0 DAT0 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00040000>, /* OCSRAM */
+			 <0x00 0x78400000 0x00 0x78400000 0x00 0x00008000>, /* MAIN R5FSS0 ATCM */
+			 <0x00 0x78500000 0x00 0x78500000 0x00 0x00008000>, /* MAIN R5FSS0 BTCM */
+			 <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00200000>, /* C7X_0 L2SRAM */
+			 <0x00 0x7e200000 0x00 0x7e200000 0x00 0x00200000>, /* C7X_1 L2SRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe0 DAT1 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+			 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>,
+			 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>,
+			 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>,
+			 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>,
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>,
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>;
+	};
+};
+
+/* Main domain overrides */
+
+&inta_main_dmss {
+	ti,interrupt-ranges = <7 71 21>;
+};
+
+&oc_sram {
+	reg = <0x00 0x70000000 0x00 0x40000>;
+	ranges = <0x00 0x00 0x70000000 0x40000>;
+};
diff --git a/src/arm64/ti/k3-j784s4-evm.dts b/src/arm64/ti/k3-j784s4-evm.dts
index f34b92acc5..81fd7afac8 100644
--- a/src/arm64/ti/k3-j784s4-evm.dts
+++ b/src/arm64/ti/k3-j784s4-evm.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
  */
@@ -31,6 +31,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
+		bootph-all;
 		/* 32G RAM */
 		reg = <0x00 0x80000000 0x00 0x80000000>,
 		      <0x08 0x80000000 0x07 0x80000000>;
@@ -296,6 +297,13 @@
 		>;
 	};
 
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */
+			J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */
+		>;
+	};
+
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -335,8 +343,6 @@
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
@@ -760,6 +766,24 @@
 	};
 };
 
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
+				  "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO3",
+				  "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
+				  "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
+	};
+};
+
 &main_sdhci0 {
 	bootph-all;
 	/* eMMC */
diff --git a/src/arm64/ti/k3-j784s4-main.dtsi b/src/arm64/ti/k3-j784s4-main.dtsi
index f2b720ed1e..b67c37460a 100644
--- a/src/arm64/ti/k3-j784s4-main.dtsi
+++ b/src/arm64/ti/k3-j784s4-main.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J784S4 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/mux/mux.h>
@@ -52,12 +52,12 @@
 			compatible = "reg-mux";
 			reg = <0x00004080 0x30>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
-					<0x4088 0x3>, <0x408c 0x3>, /* SERDES0 lane2/3 select */
-					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
-					<0x4098 0x3>, <0x409c 0x3>, /* SERDES1 lane2/3 select */
-					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
-					<0x40a8 0x3>, <0x40ac 0x3>; /* SERDES2 lane2/3 select */
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
+					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
+					<0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */
+					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
+					<0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */
 			idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
 				      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
 				      <J784S4_SERDES0_LANE2_IP3_UNUSED>,
@@ -662,6 +662,204 @@
 		status = "disabled";
 	};
 
+	ti_csi2rx0: ticsi2rx@4500000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04500000 0x00 0x00001000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4940 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@4504000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04504000 0x00 0x00001000>;
+			clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>,
+				<&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx1: ticsi2rx@4510000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04510000 0x00 0x1000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4960 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx1: csi-bridge@4514000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04514000 0x00 0x00001000>;
+			clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>,
+				<&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy1>;
+			phy-names = "dphy";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi1_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi1_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi1_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi1_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi1_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	ti_csi2rx2: ticsi2rx@4520000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		reg = <0x00 0x04520000 0x00 0x00001000>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dmas = <&main_bcdma_csi 0 0x4980 0>;
+		dma-names = "rx0";
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		cdns_csi2rx2: csi-bridge@4524000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x04524000 0x00 0x00001000>;
+			clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>,
+				<&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy2>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi2_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi2_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi2_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi2_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@4580000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x04580000 0x00 0x00001100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 212 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy1: phy@4590000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x04590000 0x00 0x00001100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 213 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	dphy2: phy@45a0000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x045a0000 0x00 0x00001100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	vpu0: video-codec@4210000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4210000 0x00 0x10000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 241 2>;
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	vpu1: video-codec@4220000 {
+		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+		reg = <0x00 0x4220000 0x00 0x10000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 242 2>;
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	main_sdhci0: mmc@4f80000 {
 		compatible = "ti,j721e-sdhci-8bit";
 		reg = <0x00 0x04f80000 0x00 0x1000>,
@@ -1224,7 +1422,6 @@
 			ti,sci-dev-id = <281>;
 			ti,sci-rm-range-rchan = <0x21>;
 			ti,sci-rm-range-tchan = <0x22>;
-			status = "disabled";
 		};
 
 		cpts@310d0000 {
diff --git a/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi b/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
index 3902a921d7..77a8d99139 100644
--- a/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -1,8 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu_wakeup {
@@ -628,7 +628,7 @@
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x00 0x350>,
 		      <0x00 0x42050000 0x00 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 
diff --git a/src/arm64/ti/k3-j784s4-thermal.dtsi b/src/arm64/ti/k3-j784s4-thermal.dtsi
index f7b1a15b8f..e3ef61c165 100644
--- a/src/arm64/ti/k3-j784s4-thermal.dtsi
+++ b/src/arm64/ti/k3-j784s4-thermal.dtsi
@@ -1,4 +1,7 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
 
 #include <dt-bindings/thermal/thermal.h>
 
diff --git a/src/arm64/ti/k3-j784s4.dtsi b/src/arm64/ti/k3-j784s4.dtsi
index 4398c3a463..6e2e92ffe7 100644
--- a/src/arm64/ti/k3-j784s4.dtsi
+++ b/src/arm64/ti/k3-j784s4.dtsi
@@ -1,10 +1,10 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
 /*
  * Device Tree Source for J784S4 SoC Family
  *
  * TRM (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52
  *
- * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  *
  */
 
@@ -235,6 +235,8 @@
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
+			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
diff --git a/src/arm64/ti/k3-pinctrl.h b/src/arm64/ti/k3-pinctrl.h
index 2a4e0e084d..4cd2df467d 100644
--- a/src/arm64/ti/k3-pinctrl.h
+++ b/src/arm64/ti/k3-pinctrl.h
@@ -1,9 +1,9 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
 /*
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 #ifndef DTS_ARM64_TI_K3_PINCTRL_H
 #define DTS_ARM64_TI_K3_PINCTRL_H
@@ -59,6 +59,9 @@
 #define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define J722S_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J722S_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
diff --git a/src/arm64/ti/k3-serdes.h b/src/arm64/ti/k3-serdes.h
index 21b4886c47..a011ad893b 100644
--- a/src/arm64/ti/k3-serdes.h
+++ b/src/arm64/ti/k3-serdes.h
@@ -1,8 +1,8 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
 /*
  * This header provides constants for SERDES MUX for TI SoCs
  *
- * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef DTS_ARM64_TI_K3_SERDES_H
diff --git a/src/arm64/xilinx/zynqmp-clk-ccf.dtsi b/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
index ccaca29200..dd4569e7bd 100644
--- a/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
+++ b/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
@@ -230,18 +230,30 @@
 
 &uart0 {
 	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk UART0_REF>;
 };
 
 &uart1 {
 	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk UART1_REF>;
 };
 
-&dwc3_0 {
+&usb0 {
 	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+	assigned-clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
 };
 
-&dwc3_1 {
+&dwc3_0 {
+	clocks = <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&usb1 {
 	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+	assigned-clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&dwc3_1 {
+	clocks = <&zynqmp_clk USB3_DUAL_REF>;
 };
 
 &watchdog0 {
diff --git a/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso b/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
index 92f4190d56..d7535a77b4 100644
--- a/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/src/arm64/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -139,7 +139,7 @@
 	bus-width = <4>;
 };
 
-&gem3 { /* required by spec */
+&gem3 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
@@ -166,9 +166,28 @@
 	};
 };
 
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
 	status = "okay";
 
+	pinctrl_gpio0_default: gpio0-default {
+                conf {
+                        groups = "gpio0_38_grp";
+                        bias-pull-up;
+                        power-source = <IO_STANDARD_LVCMOS18>;
+                };
+
+                mux {
+                        groups = "gpio0_38_grp";
+                        function = "gpio0";
+                };
+
+                conf-tx {
+                        pins = "MIO38";
+                        bias-disable;
+                        output-enable;
+                };
+        };
+
 	pinctrl_uart1_default: uart1-default {
 		conf {
 			groups = "uart1_9_grp";
@@ -185,6 +204,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -207,7 +227,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		conf {
 			groups = "gpio0_24_grp", "gpio0_25_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
@@ -236,6 +256,7 @@
 		conf-bootstrap {
 			pins = "MIO71", "MIO73", "MIO75";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -243,6 +264,7 @@
 			pins = "MIO64", "MIO65", "MIO66",
 				"MIO67", "MIO68", "MIO69";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -251,6 +273,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -281,6 +304,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
@@ -319,6 +343,12 @@
 	};
 };
 
+&gpio {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &uart1 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso b/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
index f88b71f5b0..a7b8fffad4 100644
--- a/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/src/arm64/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -94,6 +94,7 @@
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+	assigned-clock-rates = <250000000>, <20000000>;
 };
 
 &dwc3_0 {
@@ -122,7 +123,7 @@
 	bus-width = <4>;
 };
 
-&gem3 { /* required by spec */
+&gem3 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
@@ -149,9 +150,28 @@
 	};
 };
 
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
 	status = "okay";
 
+	pinctrl_gpio0_default: gpio0-default {
+		conf {
+			groups = "gpio0_38_grp";
+			bias-pull-up;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_38_grp";
+			function = "gpio0";
+		};
+
+		conf-tx {
+			pins = "MIO38";
+			bias-disable;
+			output-enable;
+		};
+	};
+
 	pinctrl_uart1_default: uart1-default {
 		conf {
 			groups = "uart1_9_grp";
@@ -168,6 +188,7 @@
 		conf-tx {
 			pins = "MIO36";
 			bias-disable;
+			output-enable;
 		};
 
 		mux {
@@ -190,7 +211,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		conf {
 			groups = "gpio0_24_grp", "gpio0_25_grp";
 			slew-rate = <SLEW_RATE_SLOW>;
@@ -219,6 +240,7 @@
 		conf-bootstrap {
 			pins = "MIO71", "MIO73", "MIO75";
 			bias-disable;
+			output-enable;
 			low-power-disable;
 		};
 
@@ -226,6 +248,7 @@
 			pins = "MIO64", "MIO65", "MIO66",
 				"MIO67", "MIO68", "MIO69";
 			bias-disable;
+			output-enable;
 			low-power-enable;
 		};
 
@@ -234,6 +257,7 @@
 			slew-rate = <SLEW_RATE_SLOW>;
 			power-source = <IO_STANDARD_LVCMOS18>;
 			bias-disable;
+			output-enable;
 		};
 
 		mux-mdio {
@@ -264,6 +288,7 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			"MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
+			output-enable;
 			drive-strength = <4>;
 			slew-rate = <SLEW_RATE_SLOW>;
 		};
@@ -302,6 +327,12 @@
 	};
 };
 
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
 &uart1 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts b/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 73491626e0..6aff22d433 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -148,7 +148,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_36_grp", "gpio0_37_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts b/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
index f767708fb5..1850325e1d 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -219,7 +219,7 @@
 		};
 	};
 
-	pinctrl_i2c0_gpio: i2c0-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_6_grp", "gpio0_7_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts b/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b1857e17ab..53aa3dca1d 100644
--- a/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -125,7 +125,7 @@
 		};
 	};
 
-	pinctrl_i2c0_gpio: i2c0-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_74_grp", "gpio0_75_grp";
 			function = "gpio0";
@@ -152,7 +152,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_76_grp", "gpio0_77_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/src/arm64/xilinx/zynqmp-zcu100-revC.dts
index 52f998c225..c5945067cd 100644
--- a/src/arm64/xilinx/zynqmp-zcu100-revC.dts
+++ b/src/arm64/xilinx/zynqmp-zcu100-revC.dts
@@ -275,7 +275,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_4_grp", "gpio0_5_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu102-revA.dts b/src/arm64/xilinx/zynqmp-zcu102-revA.dts
index 84952c14f0..ad8f23a0ec 100644
--- a/src/arm64/xilinx/zynqmp-zcu102-revA.dts
+++ b/src/arm64/xilinx/zynqmp-zcu102-revA.dts
@@ -603,7 +603,7 @@
 				reg = <0x5d>;
 				temperature-stability = <50>; /* copy from zc702 */
 				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
+				clock-frequency = <156250000>;
 				clock-output-names = "si570_mgt";
 			};
 		};
@@ -689,7 +689,7 @@
 		};
 	};
 
-	pinctrl_i2c0_gpio: i2c0-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_14_grp", "gpio0_15_grp";
 			function = "gpio0";
@@ -716,7 +716,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_16_grp", "gpio0_17_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu104-revA.dts b/src/arm64/xilinx/zynqmp-zcu104-revA.dts
index 5084ddcee0..b1eca1bb6a 100644
--- a/src/arm64/xilinx/zynqmp-zcu104-revA.dts
+++ b/src/arm64/xilinx/zynqmp-zcu104-revA.dts
@@ -272,7 +272,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_16_grp", "gpio0_17_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu104-revC.dts b/src/arm64/xilinx/zynqmp-zcu104-revC.dts
index b273bd1d92..ddc74d963a 100644
--- a/src/arm64/xilinx/zynqmp-zcu104-revC.dts
+++ b/src/arm64/xilinx/zynqmp-zcu104-revC.dts
@@ -284,7 +284,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_16_grp", "gpio0_17_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu106-revA.dts b/src/arm64/xilinx/zynqmp-zcu106-revA.dts
index 50c384aa25..7beedd730f 100644
--- a/src/arm64/xilinx/zynqmp-zcu106-revA.dts
+++ b/src/arm64/xilinx/zynqmp-zcu106-revA.dts
@@ -605,7 +605,7 @@
 				reg = <0x5d>;
 				temperature-stability = <50>; /* copy from zc702 */
 				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
+				clock-frequency = <156250000>;
 				clock-output-names = "si570_mgt";
 			};
 		};
@@ -700,7 +700,7 @@
 		};
 	};
 
-	pinctrl_i2c0_gpio: i2c0-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_14_grp", "gpio0_15_grp";
 			function = "gpio0";
@@ -727,7 +727,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_16_grp", "gpio0_17_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu111-revA.dts b/src/arm64/xilinx/zynqmp-zcu111-revA.dts
index 617cb0405a..b67ff7ecf3 100644
--- a/src/arm64/xilinx/zynqmp-zcu111-revA.dts
+++ b/src/arm64/xilinx/zynqmp-zcu111-revA.dts
@@ -589,7 +589,7 @@
 		};
 	};
 
-	pinctrl_i2c0_gpio: i2c0-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		mux {
 			groups = "gpio0_14_grp", "gpio0_15_grp";
 			function = "gpio0";
@@ -616,7 +616,7 @@
 		};
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio {
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		mux {
 			groups = "gpio0_16_grp", "gpio0_17_grp";
 			function = "gpio0";
diff --git a/src/arm64/xilinx/zynqmp-zcu1275-revA.dts b/src/arm64/xilinx/zynqmp-zcu1275-revA.dts
index c406017b03..a38c2baeba 100644
--- a/src/arm64/xilinx/zynqmp-zcu1275-revA.dts
+++ b/src/arm64/xilinx/zynqmp-zcu1275-revA.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * dts file for Xilinx ZynqMP ZC1275
+ * dts file for Xilinx ZynqMP ZCU1275
  *
  * (C) Copyright 2017 - 2021, Xilinx, Inc.
  *
diff --git a/src/arm64/xilinx/zynqmp.dtsi b/src/arm64/xilinx/zynqmp.dtsi
index eaba466804..25d20d8032 100644
--- a/src/arm64/xilinx/zynqmp.dtsi
+++ b/src/arm64/xilinx/zynqmp.dtsi
@@ -24,6 +24,13 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	options {
+		u-boot {
+			compatible = "u-boot,config";
+			bootscr-address = /bits/ 64 <0x20000000>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -180,13 +187,18 @@
 	};
 
 	firmware {
+		optee: optee  {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
 		zynqmp_firmware: zynqmp-firmware {
 			compatible = "xlnx,zynqmp-firmware";
 			#power-domain-cells = <1>;
 			method = "smc";
 			bootph-all;
 
-			zynqmp_power: zynqmp-power {
+			zynqmp_power: power-management {
 				bootph-all;
 				compatible = "xlnx,zynqmp-power";
 				interrupt-parent = <&gic>;
@@ -281,6 +293,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_CAN0>;
 			power-domains = <&zynqmp_firmware PD_CAN_0>;
 		};
 
@@ -293,6 +306,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_CAN1>;
 			power-domains = <&zynqmp_firmware PD_CAN_1>;
 		};
 
@@ -326,7 +340,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14e8>;
+			/* iommus = <&smmu 0x14e8>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -339,7 +353,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14e9>;
+			/* iommus = <&smmu 0x14e9>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -352,7 +366,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14ea>;
+			/* iommus = <&smmu 0x14ea>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -365,7 +379,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14eb>;
+			/* iommus = <&smmu 0x14eb>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -378,7 +392,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14ec>;
+			/* iommus = <&smmu 0x14ec>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -391,7 +405,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14ed>;
+			/* iommus = <&smmu 0x14ed>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -404,7 +418,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14ee>;
+			/* iommus = <&smmu 0x14ee>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -417,7 +431,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			iommus = <&smmu 0x14ef>;
+			/* iommus = <&smmu 0x14ef>; */
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
@@ -462,7 +476,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x868>;
+			/* iommus = <&smmu 0x868>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -475,7 +489,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x869>;
+			/* iommus = <&smmu 0x869>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -488,7 +502,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x86a>;
+			/* iommus = <&smmu 0x86a>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -501,7 +515,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x86b>;
+			/* iommus = <&smmu 0x86b>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -514,7 +528,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x86c>;
+			/* iommus = <&smmu 0x86c>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -527,7 +541,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x86d>;
+			/* iommus = <&smmu 0x86d>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -540,7 +554,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x86e>;
+			/* iommus = <&smmu 0x86e>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -553,7 +567,7 @@
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			iommus = <&smmu 0x86f>;
+			/* iommus = <&smmu 0x86f>; */
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
@@ -573,7 +587,7 @@
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			iommus = <&smmu 0x872>;
+			/* iommus = <&smmu 0x872>; */
 			power-domains = <&zynqmp_firmware PD_NAND>;
 		};
 
@@ -585,7 +599,7 @@
 				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			iommus = <&smmu 0x874>;
+			/* iommus = <&smmu 0x874>; */
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
 			reset-names = "gem0_rst";
@@ -599,7 +613,7 @@
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			iommus = <&smmu 0x875>;
+			/* iommus = <&smmu 0x875>; */
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
 			reset-names = "gem1_rst";
@@ -613,7 +627,7 @@
 				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			iommus = <&smmu 0x876>;
+			/* iommus = <&smmu 0x876>; */
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
 			reset-names = "gem2_rst";
@@ -627,7 +641,7 @@
 				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			iommus = <&smmu 0x877>;
+			/* iommus = <&smmu 0x877>; */
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
 			reset-names = "gem3_rst";
@@ -689,7 +703,7 @@
 			msi-parent = <&pcie>;
 			reg = <0x0 0xfd0e0000 0x0 0x1000>,
 			      <0x0 0xfd480000 0x0 0x1000>,
-			      <0x80 0x00000000 0x0 0x1000000>;
+			      <0x80 0x00000000 0x0 0x10000000>;
 			reg-names = "breg", "pcireg", "cfg";
 			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */
 				 <0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
@@ -699,7 +713,7 @@
 					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
 					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
 					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
-			iommus = <&smmu 0x4d0>;
+			/* iommus = <&smmu 0x4d0>; */
 			power-domains = <&zynqmp_firmware PD_PCIE>;
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
@@ -720,7 +734,7 @@
 			      <0x0 0xc0000000 0x0 0x8000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			iommus = <&smmu 0x873>;
+			/* iommus = <&smmu 0x873>; */
 			power-domains = <&zynqmp_firmware PD_QSPI>;
 		};
 
@@ -752,8 +766,7 @@
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&zynqmp_firmware PD_SATA>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-			iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
-				 <&smmu 0x4c2>, <&smmu 0x4c3>;
+			/* iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; */
 		};
 
 		sdhci0: mmc@ff160000 {
@@ -764,7 +777,7 @@
 			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			iommus = <&smmu 0x870>;
+			/* iommus = <&smmu 0x870>; */
 			#clock-cells = <1>;
 			clock-output-names = "clk_out_sd0", "clk_in_sd0";
 			power-domains = <&zynqmp_firmware PD_SD_0>;
@@ -779,7 +792,7 @@
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			iommus = <&smmu 0x871>;
+			/* iommus = <&smmu 0x871>; */
 			#clock-cells = <1>;
 			clock-output-names = "clk_out_sd1", "clk_in_sd1";
 			power-domains = <&zynqmp_firmware PD_SD_1>;
@@ -912,6 +925,7 @@
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
 			reg = <0x0 0xff9d0000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
 			power-domains = <&zynqmp_firmware PD_USB_0>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
 				 <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
@@ -922,14 +936,15 @@
 
 			dwc3_0: usb@fe200000 {
 				compatible = "snps,dwc3";
+				status = "disabled";
 				reg = <0x0 0xfe200000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
 				interrupt-names = "host", "peripheral", "otg";
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "bus_early", "ref";
-				iommus = <&smmu 0x860>;
+				clock-names = "ref";
+				/* iommus = <&smmu 0x860>; */
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,resume-hs-terminations;
 				/* dma-coherent; */
@@ -942,6 +957,7 @@
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
 			reg = <0x0 0xff9e0000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
 			power-domains = <&zynqmp_firmware PD_USB_1>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
 				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
@@ -951,14 +967,15 @@
 
 			dwc3_1: usb@fe300000 {
 				compatible = "snps,dwc3";
+				status = "disabled";
 				reg = <0x0 0xfe300000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
 				interrupt-names = "host", "peripheral", "otg";
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "bus_early", "ref";
-				iommus = <&smmu 0x861>;
+				clock-names = "ref";
+				/* iommus = <&smmu 0x861>; */
 				snps,quirk-frame-length-adjustment = <0x20>;
 				snps,resume-hs-terminations;
 				/* dma-coherent; */
@@ -1018,6 +1035,7 @@
 			interrupt-parent = <&gic>;
 			clock-names = "axi_clk";
 			power-domains = <&zynqmp_firmware PD_DP>;
+			/* iommus = <&smmu 0xce4>; */
 			#dma-cells = <1>;
 		};
 
@@ -1032,6 +1050,7 @@
 			reg-names = "dp", "blend", "av_buf", "aud";
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
+			/* iommus = <&smmu 0xce3>; */
 			clock-names = "dp_apb_clk", "dp_aud_clk",
 				      "dp_vtc_pixel_clk_in";
 			power-domains = <&zynqmp_firmware PD_DP>;
diff --git a/src/loongarch/loongson-2k1000.dtsi b/src/loongarch/loongson-2k1000.dtsi
index 49a70f8c3c..b6aeb1f70e 100644
--- a/src/loongarch/loongson-2k1000.dtsi
+++ b/src/loongarch/loongson-2k1000.dtsi
@@ -100,6 +100,13 @@
 		#size-cells = <2>;
 		dma-coherent;
 
+		isa@18000000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18000000 0x4000>;
+		};
+
 		liointc0: interrupt-controller@1fe01400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0x0 0x1fe01400 0x0 0x40>,
diff --git a/src/loongarch/loongson-2k2000-ref.dts b/src/loongarch/loongson-2k2000-ref.dts
index dca91caf89..74b99bd234 100644
--- a/src/loongarch/loongson-2k2000-ref.dts
+++ b/src/loongarch/loongson-2k2000-ref.dts
@@ -61,12 +61,45 @@
 
 &gmac0 {
 	status = "okay";
+
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <2>;
+		};
+	};
 };
 
 &gmac1 {
 	status = "okay";
+
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <2>;
+		};
+	};
 };
 
 &gmac2 {
 	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy2>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy2: ethernet-phy@2 {
+			reg = <0>;
+		};
+	};
 };
diff --git a/src/loongarch/loongson-2k2000.dtsi b/src/loongarch/loongson-2k2000.dtsi
index a231949b5f..9eab2d02cb 100644
--- a/src/loongarch/loongson-2k2000.dtsi
+++ b/src/loongarch/loongson-2k2000.dtsi
@@ -51,6 +51,13 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
+		isa@18400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18400000 0x4000>;
+		};
+
 		pmc: power-management@100d0000 {
 			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x100d0000 0x0 0x58>;
@@ -109,6 +116,8 @@
 		msi: msi-controller@1fe01140 {
 			compatible = "loongson,pch-msi-1.0";
 			reg = <0x0 0x1fe01140 0x0 0x8>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
 			msi-controller;
 			loongson,msi-base-vec = <64>;
 			loongson,msi-num-vecs = <192>;
@@ -140,27 +149,34 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			msi-parent = <&msi>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>,
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18408000 0x0 0x00008000>,
 				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
 
 			gmac0: ethernet@3,0 {
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			gmac1: ethernet@3,1 {
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			gmac2: ethernet@3,2 {
 				reg = <0x1a00 0x0 0x0 0x0 0x0>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
diff --git a/src/mips/mobileye/eyeq5-epm5.dts b/src/mips/mobileye/eyeq5-epm5.dts
new file mode 100644
index 0000000000..6898b2d826
--- /dev/null
+++ b/src/mips/mobileye/eyeq5-epm5.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+/dts-v1/;
+
+#include "eyeq5.dtsi"
+
+/ {
+	compatible = "mobileye,eyeq5-epm5", "mobileye,eyeq5";
+	model = "Mobile EyeQ5 MP5 Evaluation board";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x02000000>,
+		      <0x8 0x02000000 0x0 0x7E000000>;
+	};
+};
diff --git a/src/mips/mobileye/eyeq5-fixed-clocks.dtsi b/src/mips/mobileye/eyeq5-fixed-clocks.dtsi
new file mode 100644
index 0000000000..78f5533a95
--- /dev/null
+++ b/src/mips/mobileye/eyeq5-fixed-clocks.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+/ {
+	/* Fixed clock */
+	pll_cpu: pll-cpu {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1500000000>;
+	};
+
+	pll_vdi: pll-vdi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1280000000>;
+	};
+
+	pll_per: pll-per {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2000000000>;
+	};
+
+	pll_ddr0: pll-ddr0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1857210000>;
+	};
+
+	pll_ddr1: pll-ddr1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1857210000>;
+	};
+
+/* PLL_CPU derivatives */
+	occ_cpu: occ-cpu {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	si_css0_ref_clk: si-css0-ref-clk { /* gate ClkRstGen_si_css0_ref */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_cpu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	cpc_clk: cpc-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core0_clk: core0-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core1_clk: core1-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core2_clk: core2-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	core3_clk: core3-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	cm_clk: cm-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	mem_clk: mem-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&si_css0_ref_clk>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	occ_isram: occ-isram {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+	isram_clk: isram-clk { /* gate ClkRstGen_isram */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_isram>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	occ_dbu: occ-dbu {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_cpu>;
+		#clock-cells = <0>;
+		clock-div = <10>;
+		clock-mult = <1>;
+	};
+	si_dbu_tp_pclk: si-dbu-tp-pclk { /* gate ClkRstGen_dbu */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_dbu>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+/* PLL_VDI derivatives */
+	occ_vdi: occ-vdi {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_vdi>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+	vdi_clk: vdi-clk { /* gate ClkRstGen_vdi */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_vdi>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	occ_can_ser: occ-can-ser {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_vdi>;
+		#clock-cells = <0>;
+		clock-div = <16>;
+		clock-mult = <1>;
+	};
+	can_ser_clk: can-ser-clk { /* gate ClkRstGen_can_ser */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_can_ser>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	i2c_ser_clk: i2c-ser-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_vdi>;
+		#clock-cells = <0>;
+		clock-div = <20>;
+		clock-mult = <1>;
+	};
+/* PLL_PER derivatives */
+	occ_periph: occ-periph {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <16>;
+		clock-mult = <1>;
+	};
+	periph_clk: periph-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	can_clk: can-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	spi_clk: spi-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	uart_clk: uart-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+	i2c_clk: i2c-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "i2c_clk";
+	};
+	timer_clk: timer-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "timer_clk";
+	};
+	gpio_clk: gpio-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_periph>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "gpio_clk";
+	};
+	emmc_sys_clk: emmc-sys-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <10>;
+		clock-mult = <1>;
+		clock-output-names = "emmc_sys_clk";
+	};
+	ccf_ctrl_clk: ccf-ctrl-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "ccf_ctrl_clk";
+	};
+	occ_mjpeg_core: occ-mjpeg-core {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "occ_mjpeg_core";
+	};
+	hsm_clk: hsm-clk { /* gate ClkRstGen_hsm */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_mjpeg_core>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "hsm_clk";
+	};
+	mjpeg_core_clk: mjpeg-core-clk { /* gate ClkRstGen_mjpeg_gen */
+		compatible = "fixed-factor-clock";
+		clocks = <&occ_mjpeg_core>;
+		#clock-cells = <0>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "mjpeg_core_clk";
+	};
+	fcmu_a_clk: fcmu-a-clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <20>;
+		clock-mult = <1>;
+		clock-output-names = "fcmu_a_clk";
+	};
+	occ_pci_sys: occ-pci-sys {
+		compatible = "fixed-factor-clock";
+		clocks = <&pll_per>;
+		#clock-cells = <0>;
+		clock-div = <8>;
+		clock-mult = <1>;
+		clock-output-names = "occ_pci_sys";
+	};
+	pclk: pclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;  /* 250MHz */
+	};
+	tsu_clk: tsu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;  /* 125MHz */
+	};
+};
diff --git a/src/mips/mobileye/eyeq5.dtsi b/src/mips/mobileye/eyeq5.dtsi
new file mode 100644
index 0000000000..6cc5980e2f
--- /dev/null
+++ b/src/mips/mobileye/eyeq5.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+* Copyright 2023 Mobileye Vision Technologies Ltd.
+*/
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include "eyeq5-fixed-clocks.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "img,i6500";
+			reg = <0>;
+			clocks = <&core0_clk>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* These reserved memory regions are also defined in bootmanager
+		* for configuring inbound translation for BARS, don't change
+		* these without syncing with bootmanager
+		*/
+		shmem0_reserved: shmem@804000000 {
+			reg = <0x8 0x04000000 0x0 0x1000000>;
+		};
+		shmem1_reserved: shmem@805000000 {
+			reg = <0x8 0x05000000 0x0 0x1000000>;
+		};
+		pci0_msi_reserved: pci0-msi@806000000 {
+			reg = <0x8 0x06000000 0x0 0x100000>;
+		};
+		pci1_msi_reserved: pci1-msi@806100000 {
+			reg = <0x8 0x06100000 0x0 0x100000>;
+		};
+
+		mini_coredump0_reserved: mini-coredump0@806200000 {
+			reg = <0x8 0x06200000 0x0 0x100000>;
+		};
+		mhm_reserved_0: the-mhm-reserved-0@0 {
+			reg = <0x8 0x00000000 0x0 0x0000800>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	soc: soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		compatible = "simple-bus";
+
+		uart0: serial@800000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x800000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks  = <&uart_clk>, <&occ_periph>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@900000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x900000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks  = <&uart_clk>, <&occ_periph>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: serial@a00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0xa00000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks  = <&uart_clk>, <&occ_periph>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		gic: interrupt-controller@140000 {
+			compatible = "mti,gic";
+			reg = <0x0 0x140000 0x0 0x20000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/*
+			* Declare the interrupt-parent even though the mti,gic
+			* binding doesn't require it, such that the kernel can
+			* figure out that cpu_intc is the root interrupt
+			* controller & should be probed first.
+			*/
+			interrupt-parent = <&cpu_intc>;
+
+			timer {
+				compatible = "mti,gic-timer";
+				interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+				clocks = <&core0_clk>;
+			};
+		};
+	};
+};
diff --git a/src/mips/ralink/mt7621.dtsi b/src/mips/ralink/mt7621.dtsi
index 35a10258f2..6e95e6f19a 100644
--- a/src/mips/ralink/mt7621.dtsi
+++ b/src/mips/ralink/mt7621.dtsi
@@ -115,14 +115,58 @@
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
 			clocks = <&sysc MT7621_CLK_UART1>;
 
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
 
+			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+		};
+
+		serial1: serial@d00 {
+			compatible = "ns16550a";
+			reg = <0xd00 0x100>;
+
+			reg-io-width = <4>;
 			reg-shift = <2>;
+
+			clocks = <&sysc MT7621_CLK_UART2>;
+
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>;
+
+			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+
+			status = "disabled";
+		};
+
+		serial2: serial@e00 {
+			compatible = "ns16550a";
+			reg = <0xe00 0x100>;
+
 			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			clocks = <&sysc MT7621_CLK_UART3>;
+
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>;
+
 			no-loopback-test;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins>;
+
+			status = "disabled";
 		};
 
 		spi0: spi@b00 {
@@ -263,6 +307,9 @@
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
 
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		clocks = <&sysc MT7621_CLK_XTAL>;
 		clock-names = "sys_ck";
 
diff --git a/src/powerpc/akebono.dts b/src/powerpc/akebono.dts
index df18f8dc46..343326c303 100644
--- a/src/powerpc/akebono.dts
+++ b/src/powerpc/akebono.dts
@@ -126,7 +126,7 @@
 			interrupts = <93 2>;
 		};
 
-		EHCI0: ehci@30010000000 {
+		EHCI0: usb@30010000000 {
 			compatible = "ibm,476gtr-ehci", "generic-ehci";
 			reg = <0x300 0x10000000 0x0 0x10000>;
 			interrupt-parent = <&MPIC>;
@@ -140,14 +140,14 @@
 			interrupt-parent = <&MPIC>;
 		};
 
-		OHCI0: ohci@30010010000 {
+		OHCI0: usb@30010010000 {
 			compatible = "ibm,476gtr-ohci", "generic-ohci";
 			reg = <0x300 0x10010000 0x0 0x10000>;
 			interrupt-parent = <&MPIC>;
 			interrupts = <89 1>;
 			};
 
-		OHCI1: ohci@30010020000 {
+		OHCI1: usb@30010020000 {
 			compatible = "ibm,476gtr-ohci", "generic-ohci";
 			reg = <0x300 0x10020000 0x0 0x10000>;
 			interrupt-parent = <&MPIC>;
diff --git a/src/riscv/microchip/mpfs.dtsi b/src/riscv/microchip/mpfs.dtsi
index 59fd2d4ea5..9883ca3554 100644
--- a/src/riscv/microchip/mpfs.dtsi
+++ b/src/riscv/microchip/mpfs.dtsi
@@ -243,7 +243,7 @@
 		};
 
 		pdma: dma-controller@3000000 {
-			compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+			compatible = "microchip,mpfs-pdma", "sifive,pdma0";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic>;
 			interrupts = <5 6>, <7 8>, <9 10>, <11 12>;
@@ -422,7 +422,7 @@
 		can0: can@2010c000 {
 			compatible = "microchip,mpfs-can";
 			reg = <0x0 0x2010c000 0x0 0x1000>;
-			clocks = <&clkcfg CLK_CAN0>;
+			clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>;
 			interrupt-parent = <&plic>;
 			interrupts = <56>;
 			status = "disabled";
@@ -431,7 +431,7 @@
 		can1: can@2010d000 {
 			compatible = "microchip,mpfs-can";
 			reg = <0x0 0x2010d000 0x0 0x1000>;
-			clocks = <&clkcfg CLK_CAN1>;
+			clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>;
 			interrupt-parent = <&plic>;
 			interrupts = <57>;
 			status = "disabled";
diff --git a/src/riscv/renesas/r9a07g043f.dtsi b/src/riscv/renesas/r9a07g043f.dtsi
index a92cfcfc02..f35324b917 100644
--- a/src/riscv/renesas/r9a07g043f.dtsi
+++ b/src/riscv/renesas/r9a07g043f.dtsi
@@ -27,7 +27,7 @@
 			riscv,isa-base = "rv64i";
 			riscv,isa-extensions = "i", "m", "a", "f", "d", "c",
 					       "zicntr", "zicsr", "zifencei",
-					       "zihpm";
+					       "zihpm", "xandespmu";
 			mmu-type = "riscv,sv39";
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <0x40>;
@@ -39,13 +39,17 @@
 
 			cpu0_intc: interrupt-controller {
 				#interrupt-cells = <1>;
-				compatible = "riscv,cpu-intc";
+				compatible = "andestech,cpu-intc", "riscv,cpu-intc";
 				interrupt-controller;
 			};
 		};
 	};
 };
 
+&pinctrl {
+	gpio-ranges = <&pinctrl 0 0 232>;
+};
+
 &soc {
 	dma-noncoherent;
 	interrupt-parent = <&plic>;
diff --git a/src/riscv/sophgo/sg2042.dtsi b/src/riscv/sophgo/sg2042.dtsi
index ead1cc35d8..81fda312f9 100644
--- a/src/riscv/sophgo/sg2042.dtsi
+++ b/src/riscv/sophgo/sg2042.dtsi
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 
+#include <dt-bindings/reset/sophgo,sg2042-reset.h>
+
 #include "sg2042-cpus.dtsi"
 
 / {
@@ -327,6 +329,12 @@
 			riscv,ndev = <224>;
 		};
 
+		rstgen: reset-controller@7030013000 {
+			compatible = "sophgo,sg2042-reset";
+			reg = <0x00000070 0x30013000 0x00000000 0x0000000c>;
+			#reset-cells = <1>;
+		};
+
 		uart0: serial@7040000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00000070 0x40000000 0x00000000 0x00001000>;
@@ -335,6 +343,7 @@
 			clock-frequency = <500000000>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rstgen RST_UART0>;
 			status = "disabled";
 		};
 	};
diff --git a/src/riscv/starfive/jh7100-beaglev-starlight.dts b/src/riscv/starfive/jh7100-beaglev-starlight.dts
index 7cda3a8902..168f5d9895 100644
--- a/src/riscv/starfive/jh7100-beaglev-starlight.dts
+++ b/src/riscv/starfive/jh7100-beaglev-starlight.dts
@@ -11,3 +11,14 @@
 	model = "BeagleV Starlight Beta";
 	compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
 };
+
+&gmac {
+	phy-handle = <&phy>;
+};
+
+&mdio {
+	phy: ethernet-phy@7 {
+		reg = <7>;
+		reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/src/riscv/starfive/jh7100-common.dtsi b/src/riscv/starfive/jh7100-common.dtsi
index 42fb61c360..ae1a6aeb0a 100644
--- a/src/riscv/starfive/jh7100-common.dtsi
+++ b/src/riscv/starfive/jh7100-common.dtsi
@@ -72,7 +72,91 @@
 	};
 };
 
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+	};
+};
+
 &gpio {
+	gmac_pins: gmac-0 {
+		gtxclk-pins {
+			pins = <PAD_FUNC_SHARE(115)>;
+			bias-pull-up;
+			drive-strength = <35>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+		miitxclk-pins {
+			pins = <PAD_FUNC_SHARE(116)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		tx-pins {
+			pins = <PAD_FUNC_SHARE(117)>,
+			       <PAD_FUNC_SHARE(119)>,
+			       <PAD_FUNC_SHARE(120)>,
+			       <PAD_FUNC_SHARE(121)>,
+			       <PAD_FUNC_SHARE(122)>,
+			       <PAD_FUNC_SHARE(123)>,
+			       <PAD_FUNC_SHARE(124)>,
+			       <PAD_FUNC_SHARE(125)>,
+			       <PAD_FUNC_SHARE(126)>;
+			bias-pull-up;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		rxclk-pins {
+			pins = <PAD_FUNC_SHARE(127)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <6>;
+		};
+		rxer-pins {
+			pins = <PAD_FUNC_SHARE(129)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+		rx-pins {
+			pins = <PAD_FUNC_SHARE(128)>,
+			       <PAD_FUNC_SHARE(130)>,
+			       <PAD_FUNC_SHARE(131)>,
+			       <PAD_FUNC_SHARE(132)>,
+			       <PAD_FUNC_SHARE(133)>,
+			       <PAD_FUNC_SHARE(134)>,
+			       <PAD_FUNC_SHARE(135)>,
+			       <PAD_FUNC_SHARE(136)>,
+			       <PAD_FUNC_SHARE(137)>,
+			       <PAD_FUNC_SHARE(138)>,
+			       <PAD_FUNC_SHARE(139)>,
+			       <PAD_FUNC_SHARE(140)>,
+			       <PAD_FUNC_SHARE(141)>;
+			bias-pull-up;
+			drive-strength = <14>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
 			pinmux = <GPIOMUX(62, GPO_LOW,
@@ -115,6 +199,24 @@
 		};
 	};
 
+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(7,
+				  GPO_PWM_PAD_OUT_BIT0,
+				  GPO_PWM_PAD_OE_N_BIT0,
+				  GPI_NONE)>,
+				 <GPIOMUX(5,
+				  GPO_PWM_PAD_OUT_BIT1,
+				  GPO_PWM_PAD_OE_N_BIT1,
+				  GPI_NONE)>;
+			bias-disable;
+			drive-strength = <35>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
 	sdio0_pins: sdio0-0 {
 		clk-pins {
 			pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT,
@@ -257,6 +359,12 @@
 	clock-frequency = <27000000>;
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &sdio0 {
 	broken-cd;
 	bus-width = <4>;
diff --git a/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts b/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts
index e82af72f1a..692c696e1a 100644
--- a/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts
+++ b/src/riscv/starfive/jh7100-starfive-visionfive-v1.dts
@@ -6,7 +6,6 @@
 
 /dts-v1/;
 #include "jh7100-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "StarFive VisionFive V1";
@@ -18,3 +17,24 @@
 		priority = <224>;
 	};
 };
+
+&gmac {
+	phy-handle = <&phy>;
+};
+
+/*
+ * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires
+ * manual adjustment of the RX internal delay to work properly.  The default
+ * RX delay provided by the driver (1.95ns) is too high, but applying a 50%
+ * reduction seems to mitigate the issue.
+ *
+ * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC,
+ * which uses a Microchip PHY.  Hence, most likely the Motorcomm PHY is the one
+ * responsible for the misbehaviour, not the GMAC.
+ */
+&mdio {
+	phy: ethernet-phy@0 {
+		reg = <0>;
+		rx-internal-delay-ps = <900>;
+	};
+};
diff --git a/src/riscv/starfive/jh7100.dtsi b/src/riscv/starfive/jh7100.dtsi
index 8bcf36d07f..9a2e9583af 100644
--- a/src/riscv/starfive/jh7100.dtsi
+++ b/src/riscv/starfive/jh7100.dtsi
@@ -116,6 +116,7 @@
 	osc_sys: osc-sys {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
+		clock-output-names = "osc_sys";
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
@@ -123,6 +124,7 @@
 	osc_aud: osc-aud {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
+		clock-output-names = "osc_aud";
 		/* This value must be overridden by the board */
 		clock-frequency = <0>;
 	};
@@ -130,6 +132,7 @@
 	gmac_rmii_ref: gmac-rmii-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
+		clock-output-names = "gmac_rmii_ref";
 		/* Should be overridden by the board when needed */
 		clock-frequency = <0>;
 	};
@@ -137,6 +140,7 @@
 	gmac_gr_mii_rxclk: gmac-gr-mii-rxclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
+		clock-output-names = "gmac_gr_mii_rxclk";
 		/* Should be overridden by the board when needed */
 		clock-frequency = <0>;
 	};
@@ -204,6 +208,37 @@
 			status = "disabled";
 		};
 
+		gmac: ethernet@10020000 {
+			compatible = "starfive,jh7100-dwmac", "snps,dwmac";
+			reg = <0x0 0x10020000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
+				 <&clkgen JH7100_CLK_GMAC_AHB>,
+				 <&clkgen JH7100_CLK_GMAC_PTP_REF>,
+				 <&clkgen JH7100_CLK_GMAC_TX_INV>,
+				 <&clkgen JH7100_CLK_GMAC_GTX>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx";
+			resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
+			reset-names = "ahb";
+			interrupts = <6>, <7>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			max-frame-size = <9000>;
+			snps,multicast-filter-bins = <32>;
+			snps,perfect-filter-entries = <128>;
+			starfive,syscon = <&sysmain 0x70 0>;
+			rx-fifo-depth = <32768>;
+			tx-fifo-depth = <16384>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,fixed-burst;
+			snps,force_thresh_dma_mode;
+			status = "disabled";
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <16>;
+				snps,rd_osr_lmt = <16>;
+				snps,blen = <256 128 64 32 0 0 0>;
+			};
+		};
+
 		clkgen: clock-controller@11800000 {
 			compatible = "starfive,jh7100-clkgen";
 			reg = <0x0 0x11800000 0x0 0x10000>;
@@ -218,6 +253,11 @@
 			#reset-cells = <1>;
 		};
 
+		sysmain: syscon@11850000 {
+			compatible = "starfive,jh7100-sysmain", "syscon";
+			reg = <0x0 0x11850000 0x0 0x10000>;
+		};
+
 		i2c0: i2c@118b0000 {
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x118b0000 0x0 0x10000>;
@@ -320,6 +360,15 @@
 				 <&rstgen JH7100_RSTN_WDT>;
 		};
 
+		pwm: pwm@12490000 {
+			compatible = "starfive,jh7100-pwm", "opencores,pwm-v1";
+			reg = <0x0 0x12490000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_PWM_APB>;
+			resets = <&rstgen JH7100_RSTN_PWM_APB>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		sfctemp: temperature-sensor@124a0000 {
 			compatible = "starfive,jh7100-temp";
 			reg = <0x0 0x124a0000 0x0 0x10000>;
diff --git a/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi b/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
index b89e9791ef..45b58b6f3d 100644
--- a/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/src/riscv/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -125,6 +125,55 @@
 	clock-frequency = <49152000>;
 };
 
+&camss {
+	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+	assigned-clock-rates = <49500000>, <198000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			camss_from_csi2rx: endpoint {
+				remote-endpoint = <&csi2rx_to_camss>;
+			};
+		};
+	};
+};
+
+&csi2rx {
+	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+	assigned-clock-rates = <297000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			/* remote MIPI sensor endpoint */
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi2rx_to_camss: endpoint {
+				remote-endpoint = <&camss_from_csi2rx>;
+			};
+		};
+	};
+};
+
 &gmac0 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
@@ -323,6 +372,12 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
@@ -513,6 +568,22 @@
 		};
 	};
 
+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+					      GPOEN_SYS_PWM0_CHANNEL0,
+					      GPI_NONE)>,
+				 <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+					      GPOEN_SYS_PWM0_CHANNEL1,
+					      GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
 	spi0_pins: spi0-0 {
 		mosi-pins {
 			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
diff --git a/src/riscv/starfive/jh7110.dtsi b/src/riscv/starfive/jh7110.dtsi
index 74ed3b9264..4a5708f7fc 100644
--- a/src/riscv/starfive/jh7110.dtsi
+++ b/src/riscv/starfive/jh7110.dtsi
@@ -829,6 +829,15 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@120d0000 {
+			compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+			reg = <0x0 0x120d0000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_PWM_APB>;
+			resets = <&syscrg JH7110_SYSRST_PWM_APB>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		sfctemp: temperature-sensor@120e0000 {
 			compatible = "starfive,jh7110-temp";
 			reg = <0x0 0x120e0000 0x0 0x10000>;
@@ -1104,6 +1113,32 @@
 			#power-domain-cells = <1>;
 		};
 
+		csi2rx: csi@19800000 {
+			compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
+			reg = <0x0 0x19800000 0x0 0x10000>;
+			clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>,
+				 <&ispcrg JH7110_ISPCLK_VIN_APB>,
+				 <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>,
+				 <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>,
+				 <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>,
+				 <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>;
+			clock-names = "sys_clk", "p_clk",
+				      "pixel_if0_clk", "pixel_if1_clk",
+				      "pixel_if2_clk", "pixel_if3_clk";
+			resets = <&ispcrg JH7110_ISPRST_VIN_SYS>,
+				 <&ispcrg JH7110_ISPRST_VIN_APB>,
+				 <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>,
+				 <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>,
+				 <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>,
+				 <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>;
+			reset-names = "sys", "reg_bank",
+				      "pixel_if0", "pixel_if1",
+				      "pixel_if2", "pixel_if3";
+			phys = <&csi_phy>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		ispcrg: clock-controller@19810000 {
 			compatible = "starfive,jh7110-ispcrg";
 			reg = <0x0 0x19810000 0x0 0x10000>;
@@ -1121,6 +1156,47 @@
 			power-domains = <&pwrc JH7110_PD_ISP>;
 		};
 
+		csi_phy: phy@19820000 {
+			compatible = "starfive,jh7110-dphy-rx";
+			reg = <0x0 0x19820000 0x0 0x10000>;
+			clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>,
+				 <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>,
+				 <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>;
+			clock-names = "cfg", "ref", "tx";
+			resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+				 <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>;
+			power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>;
+			#phy-cells = <0>;
+		};
+
+		camss: isp@19840000 {
+			compatible = "starfive,jh7110-camss";
+			reg = <0x0 0x19840000 0x0 0x10000>,
+			      <0x0 0x19870000 0x0 0x30000>;
+			reg-names = "syscon", "isp";
+			clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+				 <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>,
+				 <&ispcrg JH7110_ISPCLK_DVP_INV>,
+				 <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>,
+				 <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>,
+				 <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+				 <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>;
+			clock-names = "apb_func", "wrapper_clk_c", "dvp_inv",
+				      "axiwr", "mipi_rx0_pxl", "ispcore_2x",
+				      "isp_axi";
+			resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>,
+				 <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>,
+				 <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>,
+				 <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>,
+				 <&syscrg JH7110_SYSRST_ISP_TOP>,
+				 <&syscrg JH7110_SYSRST_ISP_TOP_AXI>;
+			reset-names = "wrapper_p", "wrapper_c", "axird",
+				      "axiwr", "isp_top_n", "isp_top_axi";
+			power-domains = <&pwrc JH7110_PD_ISP>;
+			interrupts = <92>, <87>, <90>, <88>;
+			status = "disabled";
+		};
+
 		voutcrg: clock-controller@295c0000 {
 			compatible = "starfive,jh7110-voutcrg";
 			reg = <0x0 0x295c0000 0x0 0x10000>;