From: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Date: Tue, 27 Feb 2024 15:40:01 +0000 (+0100)
Subject: opos6uldev: make the LCD work again
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=64ca8db96e71a8170e5e5921ce2ea063f9e68c96;p=u-boot.git

opos6uldev: make the LCD work again

Commit 5d7a95f49999 ("imx6ul/imx6ull: synchronise device trees with
linux") removed the display timings from the board device tree whereas
they are still needed by the mxsfb driver.
Add the timings back (the correct ones) in the
imx6ul-opos6uldev-u-boot.dtsi file and remove them from the
opos6uldev.env file.

Update the opos6uldev_defconfig file so that the LCD turns on at boot.

Fixes: 5d7a95f49999 ("imx6ul/imx6ull: synchronise device trees with linux")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---

diff --git a/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi b/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
index aa88964f21..3b52d6bbd9 100644
--- a/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
+++ b/arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
@@ -7,12 +7,6 @@
 
 #include "imx6ul-opos6ul-u-boot.dtsi"
 
-/ {
-	aliases {
-		display0 = &lcdif;
-	};
-};
-
 &aips1 {
 	bootph-pre-ram;
 
@@ -22,7 +16,29 @@
 };
 
 &lcdif {
+	display = <&display0>;
 	bootph-some-ram;
+
+	display0: display0 {
+		bits-per-pixel = <18>;
+		bus-width = <18>;
+
+		display-timings {
+			timing0 {
+				clock-frequency = <33300000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <36>;
+				hfront-porch = <210>;
+				vback-porch = <13>;
+				vfront-porch = <22>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
 };
 
 &pinctrl_uart1 {
diff --git a/board/armadeus/opos6uldev/opos6uldev.env b/board/armadeus/opos6uldev/opos6uldev.env
index f900297871..2e7b65968d 100644
--- a/board/armadeus/opos6uldev/opos6uldev.env
+++ b/board/armadeus/opos6uldev/opos6uldev.env
@@ -24,7 +24,6 @@ mmcrootfstype=ext4 rootwait
 kernelimg=opos6ul-linux.bin
 splashpos=0,0
 splashimage=CONFIG_SYS_LOAD_ADDR
-videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0
 check_env=if test -n ${flash_env_version};
 	then env default env_version;
 	else env set flash_env_version ${env_version}; env save;
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index e1884df9dd..7d21a6fe93 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@@ -115,13 +115,10 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_VIDEO=y
 CONFIG_VIDEO_LOGO=y
-# CONFIG_VIDEO_BPP8 is not set
-# CONFIG_VIDEO_BPP32 is not set
 CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_MXS=y
 CONFIG_SPLASH_SCREEN=y
 CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_SPLASH_SOURCE=y
 CONFIG_BMP_16BPP=y
 CONFIG_BMP_24BPP=y
 CONFIG_BMP_32BPP=y