From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 19 Jun 2024 21:44:04 +0000 (-0700)
Subject: imx8mp-venice-gw74xx: default USB1 to host mode
X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=5b74b613694d11e802a43903afed53cbdc0c9cb0;p=u-boot.git

imx8mp-venice-gw74xx: default USB1 to host mode

The GW74xx USB1 controller connects to a dual-role connector using a GPIO
for role detection via the usb-connector Linux driver (usb-conn-gpio.c).

This drive does not exist yet in U-Boot so for now we will just default
USB1 to host mode.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
index 240fbc1b56..a90794d810 100644
--- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
@@ -243,3 +243,8 @@
 &wdog1 {
 	bootph-pre-ram;
 };
+
+/* gpio-usb-con not supported yet in U-Boot so make this a host for now */
+&usb_dwc3_0 {
+	dr_mode = "host";
+};