From: Tony Dinh Date: Tue, 26 Mar 2024 21:12:14 +0000 (-0700) Subject: arm: dts: kirkwood: Remove DTS files for Kirkwood boards X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=4dfe8e3b18cdd52017a87e145d6918643711cdc9;p=u-boot.git arm: dts: kirkwood: Remove DTS files for Kirkwood boards Remove DTS and DTSI files for Kirkwood boards that have upstream supports. This patch depends on "arm: dts: kirkwood: Enable upstream DT on Kirkwood boards" https://patchwork.ozlabs.org/project/uboot/patch/20240322021747.14873-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh Reviewed-by: Sumit Garg --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7b7788f755..27a1003985 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -47,33 +47,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \ dtb-$(CONFIG_ARCH_KIRKWOOD) += \ kirkwood-atl-sbx81lifkw.dtb \ - kirkwood-atl-sbx81lifxcat.dtb \ - kirkwood-blackarmor-nas220.dtb \ - kirkwood-d2net.dtb \ - kirkwood-dns325.dtb \ - kirkwood-dockstar.dtb \ - kirkwood-dreamplug.dtb \ - kirkwood-ds109.dtb \ - kirkwood-goflexnet.dtb \ - kirkwood-guruplug-server-plus.dtb \ - kirkwood-ib62x0.dtb \ - kirkwood-iconnect.dtb \ - kirkwood-is2.dtb \ - kirkwood-lsxhl.dtb \ - kirkwood-lschlv2.dtb \ - kirkwood-net2big.dtb \ - kirkwood-ns2.dtb \ - kirkwood-ns2lite.dtb \ - kirkwood-ns2max.dtb \ - kirkwood-ns2mini.dtb \ - kirkwood-nsa310s.dtb \ - kirkwood-nsa325.dtb \ - kirkwood-openrd-base.dtb \ - kirkwood-openrd-client.dtb \ - kirkwood-openrd-ultimate.dtb \ - kirkwood-pogo_e02.dtb \ - kirkwood-pogoplug-series-4.dtb \ - kirkwood-sheevaplug.dtb + kirkwood-atl-sbx81lifxcat.dtb dtb-$(CONFIG_MACH_S900) += \ bubblegum_96.dtb diff --git a/arch/arm/dts/kirkwood-6192.dtsi b/arch/arm/dts/kirkwood-6192.dtsi deleted file mode 100644 index 396bcba08a..0000000000 --- a/arch/arm/dts/kirkwood-6192.dtsi +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - compatible = "marvell,88f6192-pinctrl"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp5", "mpp21", "mpp23"; - marvell,function = "sata0"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp4", "mpp20", "mpp22"; - marvell,function = "sata1"; - }; - pmx_sdio: pmx-sdio { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16", "mpp17"; - marvell,function = "sdio"; - }; - }; - - rtc: rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - - sata: sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - phys = <&sata_phy0>, <&sata_phy1>; - phy-names = "port0", "port1"; - status = "disabled"; - }; - - sdio: mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - cap-mmc-highspeed; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-6281.dtsi b/arch/arm/dts/kirkwood-6281.dtsi deleted file mode 100644 index faa05849a4..0000000000 --- a/arch/arm/dts/kirkwood-6281.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - compatible = "marvell,88f6281-pinctrl"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp5", "mpp21", "mpp23"; - marvell,function = "sata0"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp4", "mpp20", "mpp22"; - marvell,function = "sata1"; - }; - pmx_sdio: pmx-sdio { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16", "mpp17"; - marvell,function = "sdio"; - }; - }; - - rtc: rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - - sata: sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - phys = <&sata_phy0>, <&sata_phy1>; - phy-names = "port0", "port1"; - status = "disabled"; - }; - - sdio: mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - cap-mmc-highspeed; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-6282.dtsi b/arch/arm/dts/kirkwood-6282.dtsi deleted file mode 100644 index e732c501ea..0000000000 --- a/arch/arm/dts/kirkwood-6282.dtsi +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 - 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ - 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-names = "intx", "error"; - interrupts = <9>, <44>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - - pcie0_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-names = "intx", "error"; - interrupts = <10>, <45>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie1_intc 0>, - <0 0 0 2 &pcie1_intc 1>, - <0 0 0 3 &pcie1_intc 2>, - <0 0 0 4 &pcie1_intc 3>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 18>; - status = "disabled"; - - pcie1_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; - }; - ocp@f1000000 { - - pinctrl: pin-controller@10000 { - compatible = "marvell,88f6282-pinctrl"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp5", "mpp21", "mpp23"; - marvell,function = "sata0"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp4", "mpp20", "mpp22"; - marvell,function = "sata1"; - }; - - /* - * Default I2C1 pinctrl setting on mpp36/mpp37, - * overwrite marvell,pins on board level if required. - */ - pmx_twsi1: pmx-twsi1 { - marvell,pins = "mpp36", "mpp37"; - marvell,function = "twsi1"; - }; - - pmx_sdio: pmx-sdio { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16", "mpp17"; - marvell,function = "sdio"; - }; - }; - - thermal: thermal@10078 { - compatible = "marvell,kirkwood-thermal"; - reg = <0x10078 0x4>; - status = "okay"; - }; - - rtc: rtc@10300 { - compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <53>; - clocks = <&gate_clk 7>; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - sata: sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <21>; - clocks = <&gate_clk 14>, <&gate_clk 15>; - clock-names = "0", "1"; - phys = <&sata_phy0>, <&sata_phy1>; - phy-names = "port0", "port1"; - status = "disabled"; - }; - - sdio: mvsdio@90000 { - compatible = "marvell,orion-sdio"; - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - bus-width = <4>; - cap-sdio-irq; - cap-sd-highspeed; - cap-mmc-highspeed; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-98dx4122.dtsi b/arch/arm/dts/kirkwood-98dx4122.dtsi deleted file mode 100644 index 299c147298..0000000000 --- a/arch/arm/dts/kirkwood-98dx4122.dtsi +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - mbus@f1000000 { - pciec: pcie@82000000 { - compatible = "marvell,kirkwood-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - - pcie0: pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - bus-range = <0x00 0xff>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &intc 9>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gate_clk 2>; - status = "disabled"; - }; - }; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - compatible = "marvell,98dx4122-pinctrl"; - - }; - }; -}; - -&sata_phy0 { - status = "disabled"; -}; - -&sata_phy1 { - status = "disabled"; -}; diff --git a/arch/arm/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/dts/kirkwood-blackarmor-nas220.dts deleted file mode 100644 index 07fbfca444..0000000000 --- a/arch/arm/dts/kirkwood-blackarmor-nas220.dts +++ /dev/null @@ -1,172 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Device Tree file for Seagate Blackarmor NAS220 - * - * Copyright (C) 2014 Evgeni Dobrev - */ - -/dts-v1/; - -#include -#include -#include "kirkwood.dtsi" -#include "kirkwood-6192.dtsi" - -/ { - model = "Seagate Blackarmor NAS220"; - compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", - "marvell,kirkwood"; - - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = ; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - button { - label = "Power"; - linux,code = ; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - blue-power { - label = "nas220:blue:power"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; - pinctrl-names = "default"; - - sata0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "SATA0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* - * Serial port routed to connector CN5 - * - * pin 1 - TX (CPU's TX) - * pin 4 - RX (CPU's RX) - * pin 6 - GND - */ -&uart0 { - status = "okay"; -}; - -&pinctrl { - pinctrl-0 = <&pmx_button_reset &pmx_button_power>; - pinctrl-names = "default"; - - pmx_act_sata0: pmx-act-sata0 { - marvell,pins = "mpp15"; - marvell,function = "sata0"; - }; - - pmx_act_sata1: pmx-act-sata1 { - marvell,pins = "mpp16"; - marvell,function = "sata1"; - }; - - pmx_power_sata0: pmx-power-sata0 { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_power_sata1: pmx-power-sata1 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_button_power: pmx-button-power { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; -}; - -&sata { - status = "okay"; - nr-ports = <2>; -}; - -&i2c0 { - status = "okay"; - - adt7476: thermal@2e { - compatible = "adi,adt7476"; - reg = <0x2e>; - }; -}; - -&nand { - status = "okay"; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-d2net.dts b/arch/arm/dts/kirkwood-d2net.dts deleted file mode 100644 index bd3b266dd7..0000000000 --- a/arch/arm/dts/kirkwood-d2net.dts +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree file for d2 Network v2 - * - * Copyright (C) 2014 Simon Guinot - * -*/ - -/dts-v1/; - -#include -#include "kirkwood-netxbig.dtsi" - -/ { - model = "LaCie d2 Network v2"; - compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "d2net_v2:blue:sata"; - slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - modes-map = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - red-fail { - label = "d2net_v2:red:fail"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-dns325.dts b/arch/arm/dts/kirkwood-dns325.dts deleted file mode 100644 index 94d9c06cbb..0000000000 --- a/arch/arm/dts/kirkwood-dns325.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-dnskw.dtsi" - -/ { - model = "D-Link DNS-325 NAS (Rev A1)"; - compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325 - &pmx_led_red_left_hdd &pmx_led_red_right_hdd - &pmx_led_white_usb>; - pinctrl-names = "default"; - - white-power { - label = "dns325:white:power"; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - white-usb { - label = "dns325:white:usb"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ - }; - red-l_hdd { - label = "dns325:red:l_hdd"; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - red-r_hdd { - label = "dns325:red:r_hdd"; - gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - }; - red-usb { - label = "dns325:red:usb"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - ocp@f1000000 { - i2c@11000 { - status = "okay"; - - lm75: lm75@48 { - compatible = "national,lm75"; - reg = <0x48>; - }; - }; - serial@12000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-dnskw.dtsi b/arch/arm/dts/kirkwood-dnskw.dtsi deleted file mode 100644 index cbaf06f2f7..0000000000 --- a/arch/arm/dts/kirkwood-dnskw.dtsi +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "D-Link DNS NASes (kirkwood-based)"; - compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_power &pmx_button_unmount - &pmx_button_reset>; - pinctrl-names = "default"; - - power { - label = "Power button"; - linux,code = ; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - eject { - label = "USB unmount button"; - linux,code = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - reset { - label = "Reset button"; - linux,code = ; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; - pinctrl-names = "default"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW - &gpio1 13 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 0 - 3000 1 - 6000 2>; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_power_off>; - pinctrl-names = "default"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 - &pmx_present_sata1 &pmx_fan_tacho - &pmx_temp_alarm>; - pinctrl-names = "default"; - - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - pmx_led_red_right_hdd: pmx-led-red-right-hdd { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - pmx_led_red_left_hdd: pmx-led-red-left-hdd { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_led_red_usb_325: pmx-led-red-usb-325 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_button_power: pmx-button-power { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_led_red_usb_320: pmx-led-red-usb-320 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_power_off: pmx-power-off { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_power_back_on: pmx-power-back-on { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_power_sata0: pmx-power-sata0 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_power_sata1: pmx-power-sata1 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_present_sata0: pmx-present-sata0 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_present_sata1: pmx-present-sata1 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_white_usb: pmx-led-white-usb { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_fan_tacho: pmx-fan-tacho { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_fan_high_speed: pmx-fan-high-speed { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_fan_low_speed: pmx-fan-low-speed { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_button_unmount: pmx-button-unmount { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_temp_alarm: pmx-temp-alarm { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - }; - sata@80000 { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>; - pinctrl-names = "default"; - - sata0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "SATA0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 7 0>; - }; - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 8 0>; - }; - }; -}; - -&nand { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x500000>; - }; - - partition@600000 { - label = "ramdisk"; - reg = <0x0600000 0x500000>; - }; - - partition@b00000 { - label = "image"; - reg = <0x0b00000 0x6600000>; - }; - - partition@7100000 { - label = "mini firmware"; - reg = <0x7100000 0xa00000>; - }; - - partition@7b00000 { - label = "config"; - reg = <0x7b00000 0x500000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-dockstar.dts b/arch/arm/dts/kirkwood-dockstar.dts deleted file mode 100644 index 6a3f1bf6d9..0000000000 --- a/arch/arm/dts/kirkwood-dockstar.dts +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Seagate FreeAgent Dockstar"; - compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_green: pmx-led-green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_orange: pmx-led-orange { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - }; - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_green &pmx_led_orange>; - pinctrl-names = "default"; - - health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 0>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x0500000 0xfb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - compatible = "marvell,88e1116"; - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-dreamplug.dts b/arch/arm/dts/kirkwood-dreamplug.dts deleted file mode 100644 index e9eea22fc9..0000000000 --- a/arch/arm/dts/kirkwood-dreamplug.dts +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Globalscale Technologies Dreamplug"; - compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - aliases { - spi0 = &spi0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_led_bluetooth: pmx-led-bluetooth { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_led_wifi: pmx-led-wifi { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_wifi_ap: pmx-led-wifi-ap { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x80000>; - label = "u-boot"; - }; - - partition@100000 { - reg = <0x100000 0x10000>; - label = "u-boot env"; - }; - - partition@180000 { - reg = <0x180000 0x10000>; - label = "dtb"; - }; - }; - }; - - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi - &pmx_led_wifi_ap >; - pinctrl-names = "default"; - - bluetooth { - label = "dreamplug:blue:bluetooth"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - wifi { - label = "dreamplug:green:wifi"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - wifi-ap { - label = "dreamplug:green:wifi_ap"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-ds109.dts b/arch/arm/dts/kirkwood-ds109.dts deleted file mode 100644 index 29982e7acb..0000000000 --- a/arch/arm/dts/kirkwood-ds109.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Andrew Lunn - * Ben Peddell - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" -#include "kirkwood-synology.dtsi" - -/ { - model = "Synology DS109, DS110, DS110jv20"; - compatible = "synology,ds109", "synology,ds110jv20", - "synology,ds110", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio-fan-150-32-35 { - status = "okay"; - }; - - gpio-leds-hdd-21-1 { - status = "okay"; - }; -}; - -&rs5c372 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-goflexnet.dts b/arch/arm/dts/kirkwood-goflexnet.dts deleted file mode 100644 index 02d87e0a10..0000000000 --- a/arch/arm/dts/kirkwood-goflexnet.dts +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_0: pmx-led_right_cap_0 { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_1: pmx-led_right_cap_1 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_2: pmx-led_right_cap_2 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_3: pmx-led_right_cap_3 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_0: pmx-led_left_cap_0 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_1: pmx-led_left_cap_1 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_2: pmx-led_left_cap_2 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_3: pmx-led_left_cap_3 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_led_green: pmx-led_green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_orange: pmx-led_orange { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - }; - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_orange - &pmx_led_left_cap_0 &pmx_led_left_cap_1 - &pmx_led_left_cap_2 &pmx_led_left_cap_3 - &pmx_led_right_cap_0 &pmx_led_right_cap_1 - &pmx_led_right_cap_2 &pmx_led_right_cap_3 - >; - pinctrl-names = "default"; - - health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - left0 { - label = "status:white:left0"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - left1 { - label = "status:white:left1"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - left2 { - label = "status:white:left2"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - left3 { - label = "status:white:left3"; - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - right0 { - label = "status:white:right0"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - }; - right1 { - label = "status:white:right1"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - right2 { - label = "status:white:right2"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - right3 { - label = "status:white:right3"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0xd800000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/dts/kirkwood-guruplug-server-plus.dts deleted file mode 100644 index ff1260ee3f..0000000000 --- a/arch/arm/dts/kirkwood-guruplug-server-plus.dts +++ /dev/null @@ -1,133 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Globalscale Technologies Guruplug Server Plus"; - compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_led_health_r: pmx-led-health-r { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_health_g: pmx-led-health-g { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_led_wmode_r: pmx-led-wmode-r { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - pmx_led_wmode_g: pmx-led-wmode-g { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - /* AzureWave AW-GH381 WiFi/BT */ - mvsdio@90000 { - status = "okay"; - non-removable; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g - &pmx_led_wmode_r &pmx_led_wmode_g >; - pinctrl-names = "default"; - - health-r { - label = "guruplug:red:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - health-g { - label = "guruplug:green:health"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - wmode-r { - label = "guruplug:red:wmode"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - wmode-g { - label = "guruplug:green:wmode"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x00100000 0x00400000>; - }; - - partition@500000 { - label = "data"; - reg = <0x00500000 0x1fb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - /* Marvell 88E1121R */ - compatible = "ethernet-phy-id0141.0cb0", - "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - /* Marvell 88E1121R */ - compatible = "ethernet-phy-id0141.0cb0", - "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - phy-connection-type = "rgmii-id"; - }; -}; diff --git a/arch/arm/dts/kirkwood-ib62x0.dts b/arch/arm/dts/kirkwood-ib62x0.dts deleted file mode 100644 index 962a910a6f..0000000000 --- a/arch/arm/dts/kirkwood-ib62x0.dts +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_led_os_red: pmx-led-os-red { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - pmx_power_off: pmx-power-off { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - pmx_led_os_green: pmx-led-os-green { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - pmx_led_usb_transfer: pmx-led-usb-transfer { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_button_usb_copy: pmx-button-usb-copy { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; - pinctrl-names = "default"; - - copy { - label = "USB Copy"; - linux,code = ; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - reset { - label = "Reset"; - linux,code = ; - gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green - &pmx_led_usb_transfer>; - pinctrl-names = "default"; - - green-os { - label = "ib62x0:green:os"; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - red-os { - label = "ib62x0:red:os"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - }; - usb-copy { - label = "ib62x0:red:usb_copy"; - gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_power_off>; - pinctrl-names = "default"; - gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0xe0000>; - }; - - partition@e0000 { - label = "u-boot environment"; - reg = <0xe0000 0x20000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x600000>; - }; - - partition@700000 { - label = "root"; - reg = <0x0700000 0xf900000>; - }; - -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-iconnect.dts b/arch/arm/dts/kirkwood-iconnect.dts deleted file mode 100644 index 4a512d8091..0000000000 --- a/arch/arm/dts/kirkwood-iconnect.dts +++ /dev/null @@ -1,195 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - linux,initrd-start = <0x4500040>; - linux,initrd-end = <0x4800000>; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_button_reset: pmx-button-reset { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - pmx_button_otb: pmx-button-otb { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - pmx_led_level: pmx-led-level { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_led_power_blue: pmx-led-power-blue { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_power_red: pmx-power-red { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_usb1: pmx-led-usb1 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_led_usb2: pmx-led-usb2 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_led_usb3: pmx-led-usb3 { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_usb4: pmx-led-usb4 { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_led_otb: pmx-led-otb { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - }; - i2c@11000 { - status = "okay"; - - lm63: lm63@4c { - compatible = "national,lm63"; - reg = <0x4c>; - }; - }; - serial@12000 { - status = "ok"; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_level &pmx_led_power_blue - &pmx_led_power_red &pmx_led_usb1 - &pmx_led_usb2 &pmx_led_usb3 - &pmx_led_usb4 &pmx_led_otb >; - pinctrl-names = "default"; - - led-level { - label = "led_level"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - power-blue { - label = "power:blue"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - power-red { - label = "power:red"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - usb1 { - label = "usb1:blue"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - usb2 { - label = "usb2:blue"; - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - usb3 { - label = "usb3:blue"; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - usb4 { - label = "usb4:blue"; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - otb { - label = "otb:blue"; - gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; - pinctrl-names = "default"; - - otb { - label = "OTB Button"; - linux,code = ; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - debounce-interval = <100>; - }; - reset { - label = "Reset"; - linux,code = ; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - debounce-interval = <100>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0xc0000>; - }; - - partition@a0000 { - label = "env"; - reg = <0xa0000 0x20000>; - }; - - partition@100000 { - label = "zImage"; - reg = <0x100000 0x300000>; - }; - - partition@540000 { - label = "initrd"; - reg = <0x540000 0x300000>; - }; - - partition@980000 { - label = "boot"; - reg = <0x980000 0x1f400000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@11 { - reg = <11>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-is2.dts b/arch/arm/dts/kirkwood-is2.dts deleted file mode 100644 index 1bc16a5cdb..0000000000 --- a/arch/arm/dts/kirkwood-is2.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Internet Space v2"; - compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = ; - }; - }; -}; - -ðphy0 { reg = <8>; }; diff --git a/arch/arm/dts/kirkwood-lschlv2.dts b/arch/arm/dts/kirkwood-lschlv2.dts deleted file mode 100644 index 1d737d903f..0000000000 --- a/arch/arm/dts/kirkwood-lschlv2.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-lsxl.dtsi" - -/ { - model = "Buffalo Linkstation LS-CHLv2"; - compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x4000000>; - }; - - ocp@f1000000 { - serial@12000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-lsxhl.dts b/arch/arm/dts/kirkwood-lsxhl.dts deleted file mode 100644 index a56e0d7977..0000000000 --- a/arch/arm/dts/kirkwood-lsxhl.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-lsxl.dtsi" - -/ { - model = "Buffalo Linkstation LS-XHL"; - compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ocp@f1000000 { - serial@12000 { - status = "okay"; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-lsxl.dtsi b/arch/arm/dts/kirkwood-lsxl.dtsi deleted file mode 100644 index c99c0da093..0000000000 --- a/arch/arm/dts/kirkwood-lsxl.dtsi +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - aliases { - spi0 = &spi0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_power_hdd: pmx-power-hdd { - marvell,pins = "mpp10"; - marvell,function = "gpo"; - }; - pmx_usb_vbus: pmx-usb-vbus { - marvell,pins = "mpp11"; - marvell,function = "gpio"; - }; - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp18"; - marvell,function = "gpo"; - }; - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp19"; - marvell,function = "gpo"; - }; - pmx_led_function_blue: pmx-led-function-blue { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - pmx_led_alarm: pmx-led-alarm { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - pmx_led_info: pmx-led-info { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_power: pmx-led-power { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_button_function: pmx-button-function { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_power_switch: pmx-power-switch { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_power_auto_switch: pmx-power-auto-switch { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_function_red: pmx-led-function_red { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - - }; - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - spi@10600 { - status = "okay"; - - m25p40@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p40", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x60000>; - label = "uboot"; - read-only; - }; - - partition@60000 { - reg = <0x60000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@70000 { - reg = <0x70000 0x10000>; - label = "uboot_env"; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_function &pmx_power_switch - &pmx_power_auto_switch>; - pinctrl-names = "default"; - - option { - label = "Function Button"; - linux,code = ; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - reserved { - label = "Power-on Switch"; - linux,code = ; - linux,input-type = <5>; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - power { - label = "Power-auto Switch"; - linux,code = ; - linux,input-type = <5>; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm - &pmx_led_info &pmx_led_power - &pmx_led_function_blue>; - pinctrl-names = "default"; - - func_blue { - label = "lsxl:blue:func"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - alarm { - label = "lsxl:red:alarm"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - info { - label = "lsxl:amber:info"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - power { - label = "lsxl:blue:power"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - func_red { - label = "lsxl:red:func"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; - pinctrl-names = "default"; - gpios = <&gpio0 19 GPIO_ACTIVE_LOW - &gpio0 18 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; - alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - restart_poweroff { - compatible = "restart-poweroff"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 11 0>; - }; - hdd_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 10 0>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - - ethphy1: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-net2big.dts b/arch/arm/dts/kirkwood-net2big.dts deleted file mode 100644 index 3e3ac289e5..0000000000 --- a/arch/arm/dts/kirkwood-net2big.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree file for LaCie 2Big Network v2 - * - * Copyright (C) 2014 - * - * Andrew Lunn - * - * Based on netxbig_v2-setup.c, - * Copyright (C) 2010 Simon Guinot - * -*/ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" -#include "kirkwood-netxbig.dtsi" - -/ { - model = "LaCie 2Big Network v2"; - compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - fan { - compatible = "gpio-fan"; - alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; -}; - -®ulators { - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; - }; - - clocks { - g762_clk: g762-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; -}; - -&i2c0 { - g762@3e { - compatible = "gmt,g762"; - reg = <0x3e>; - clocks = <&g762_clk>; - }; -}; diff --git a/arch/arm/dts/kirkwood-netxbig.dtsi b/arch/arm/dts/kirkwood-netxbig.dtsi deleted file mode 100644 index b5737026e2..0000000000 --- a/arch/arm/dts/kirkwood-netxbig.dtsi +++ /dev/null @@ -1,232 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree common file for LaCie 2Big and 5Big Network v2 - * - * Copyright (C) 2014 - * - * Andrew Lunn - * - * Based on netxbig_v2-setup.c, - * Copyright (C) 2010 Simon Guinot - * -*/ - -#include -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - serial@12000 { - status = "okay"; - }; - - spi@10600 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x80000>; - label = "u-boot"; - }; - }; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - /* - * esc and power represent a three position rocker - * switch. Thus the conventional KEY_POWER does not fit - */ - exc { - label = "Back power switch (on|auto)"; - linux,code = ; - linux,input-type = <5>; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - }; - power { - label = "Back power switch (auto|off)"; - linux,code = ; - linux,input-type = <5>; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - option { - label = "Function button"; - linux,code = ; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - regulators: regulators { - status = "okay"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd0power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; - }; - }; - - netxbig_gpio_ext: netxbig-gpio-ext { - compatible = "lacie,netxbig-gpio-ext"; - - addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH - &gpio1 16 GPIO_ACTIVE_HIGH - &gpio1 17 GPIO_ACTIVE_HIGH>; - data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH - &gpio1 13 GPIO_ACTIVE_HIGH - &gpio1 14 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - netxbig-leds { - compatible = "lacie,netxbig-leds"; - - gpio-ext = <&netxbig_gpio_ext>; - - timers = ; - - blue-power { - label = "netxbig:blue:power"; - mode-addr = <0>; - mode-val = ; - bright-addr = <1>; - max-brightness = <7>; - }; - red-power { - label = "netxbig:red:power"; - mode-addr = <0>; - mode-val = ; - bright-addr = <1>; - max-brightness = <7>; - }; - blue-sata0 { - label = "netxbig:blue:sata0"; - mode-addr = <3>; - mode-val = ; - bright-addr = <2>; - max-brightness = <7>; - }; - red-sata0 { - label = "netxbig:red:sata0"; - mode-addr = <3>; - mode-val = ; - bright-addr = <2>; - max-brightness = <7>; - }; - blue-sata1 { - label = "netxbig:blue:sata1"; - mode-addr = <4>; - mode-val = ; - bright-addr = <2>; - max-brightness = <7>; - }; - red-sata1 { - label = "netxbig:red:sata1"; - mode-addr = <4>; - mode-val = ; - bright-addr = <2>; - max-brightness = <7>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <8>; - }; - - ethphy1: ethernet-phy@1 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pinctrl { - pinctrl-names = "default"; - - pmx_button_function: pmx-button-function { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - pmx_button_power_off: pmx-button-power-off { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - pmx_button_power_on: pmx-button-power-on { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; -}; - -&i2c0 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; -}; diff --git a/arch/arm/dts/kirkwood-ns2-common.dtsi b/arch/arm/dts/kirkwood-ns2-common.dtsi deleted file mode 100644 index 51530ea866..0000000000 --- a/arch/arm/dts/kirkwood-ns2-common.dtsi +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_ns2_sata0: pmx-ns2-sata0 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - pmx_ns2_sata1: pmx-ns2-sata1 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - spi@10600 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - mode = <0>; - - partition@0 { - reg = <0x0 0x80000>; - label = "u-boot"; - }; - }; - }; - - i2c@11000 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - power { - label = "Power push button"; - linux,code = ; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - red-fail { - label = "ns2:red:fail"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; - -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@X { - /* overwrite reg property in board file */ - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-ns2.dts b/arch/arm/dts/kirkwood-ns2.dts deleted file mode 100644 index 7b67083e1e..0000000000 --- a/arch/arm/dts/kirkwood-ns2.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Network Space v2"; - compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = ; - }; - }; -}; - -ðphy0 { reg = <8>; }; diff --git a/arch/arm/dts/kirkwood-ns2lite.dts b/arch/arm/dts/kirkwood-ns2lite.dts deleted file mode 100644 index b0cb5907ed..0000000000 --- a/arch/arm/dts/kirkwood-ns2lite.dts +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Network Space Lite v2"; - compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - blue-sata { - label = "ns2:blue:sata"; - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - }; -}; - -ðphy0 { reg = <0>; }; diff --git a/arch/arm/dts/kirkwood-ns2max.dts b/arch/arm/dts/kirkwood-ns2max.dts deleted file mode 100644 index c0a087e774..0000000000 --- a/arch/arm/dts/kirkwood-ns2max.dts +++ /dev/null @@ -1,59 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include -#include "kirkwood-ns2-common.dtsi" - -/ { - model = "LaCie Network Space Max v2"; - compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW - &gpio0 7 GPIO_ACTIVE_LOW - &gpio1 1 GPIO_ACTIVE_LOW - &gpio0 23 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = - < 0 0 - 1500 15 - 1700 14 - 1800 13 - 2100 12 - 3100 11 - 3300 10 - 4300 9 - 5500 8>; - alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = ; - }; - }; -}; - -ðphy0 { reg = <8>; }; diff --git a/arch/arm/dts/kirkwood-ns2mini.dts b/arch/arm/dts/kirkwood-ns2mini.dts deleted file mode 100644 index 5b9fa14b64..0000000000 --- a/arch/arm/dts/kirkwood-ns2mini.dts +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include -#include "kirkwood-ns2-common.dtsi" - -/ { - /* This machine is embedded in the first LaCie CloudBox product. */ - model = "LaCie Network Space Mini v2"; - compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - ocp@f1000000 { - sata@80000 { - pinctrl-0 = <&pmx_ns2_sata0>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <1>; - }; - }; - - gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW - &gpio0 7 GPIO_ACTIVE_LOW - &gpio1 1 GPIO_ACTIVE_LOW - &gpio0 23 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = - < 0 0 - 3000 15 - 3180 14 - 4140 13 - 4570 12 - 6760 11 - 7140 10 - 7980 9 - 9200 8>; - alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - - ns2-leds { - compatible = "lacie,ns2-leds"; - - blue-sata { - label = "ns2:blue:sata"; - slow-gpio = <&gpio0 29 0>; - cmd-gpio = <&gpio0 30 0>; - modes-map = ; - }; - }; -}; - -ðphy0 { reg = <0>; }; diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts deleted file mode 100644 index 09ee76c2a2..0000000000 --- a/arch/arm/dts/kirkwood-nsa310s.dts +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree file for the Zyxel NSA 310S NAS box. - * - * Copyright (c) 2015-2021, Tony Dinh - * - * Based on - * Copyright (c) 2014, Adam Baker - * Based upon the board setup file created by Peter Schildmann - */ -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Zyxel NSA310S"; - compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-names = "default"; - - pmx_sata0: pmx-sata0 { - marvell,pins ; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins ; - marvell,function = "sata1"; - }; - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_green: pmx-led-hdd2-green { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_red: pmx-led-hdd2-red { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_led_usb_green: pmx-led-usb-green { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - - pmx_led_sys_green: pmx-led-sys-green { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_led_sys_orange: pmx-led-sys-orange { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_green: pmx-led-hdd1-green { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_red: pmx-led-hdd1-red { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_pwr_sata1: pmx-pwr-sata1 { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <1>; - }; - - rtc@10300 { - status = "disabled"; - }; - - i2c@11000 { - status = "okay"; - ht1382: rtc@68 { - compatible = "htk,ht1382"; - reg = <0x68>; - }; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>; - - usb0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - button@1 { - label = "Power Button"; - linux,code = ; - gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = ; - gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red - &pmx_led_usb_green - &pmx_led_sys_green &pmx_led_sys_orange - &pmx_led_copy_green &pmx_led_copy_red - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - - green-sys { - label = "nsa310s:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - orange-sys { - label = "nsa310s:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa310s:green:hdd1"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - }; - red-hdd1 { - label = "nsa310s:red:hdd1"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - green-hdd2 { - label = "nsa310s:green:hdd2"; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - red-hdd2 { - label = "nsa310s:red:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - green-usb { - label = "nsa310s:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - green-copy { - label = "nsa310s:green:copy"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk"; - }; - red-copy { - label = "nsa310s:red:copy"; - gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - }; - partition@100000 { - label = "stock_uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; -}; - -&mdio { - status = "okay"; - ethphy0: ethernet-phy@1 { - compatible = "marvell,88e1510"; - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - phy-mode = "rgmii"; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-nsa325.dts b/arch/arm/dts/kirkwood-nsa325.dts deleted file mode 100644 index efc57cfa41..0000000000 --- a/arch/arm/dts/kirkwood-nsa325.dts +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Device tree file for the Zyxel NSA 325 NAS box. - * - * Copyright (c) 2015, Hans Ulli Kroll - * - * - * Based upon the board setup file created by Peter Schildmann - */ - -/dts-v1/; - -#include "kirkwood-nsa3x0-common.dtsi" - -/ { - model = "ZyXEL NSA325"; - compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-names = "default"; - - pmx_led_hdd2_green: pmx-led-hdd2-green { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_red: pmx-led-hdd2-red { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_mcu_data: pmx-mcu-data { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_led_usb_green: pmx-led-usb-green { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_mcu_clk: pmx-mcu-clk { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_mcu_act: pmx-mcu-act { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_led_sys_green: pmx-led-sys-green { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_led_sys_orange: pmx-led-sys-orange { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_green: pmx-led-hdd1-green { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_red: pmx-led-hdd1-red { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_htp: pmx-htp { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - - /* - * Buzzer needs to be switched at around 1kHz so is - * not compatible with the gpio-beeper driver. - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_vid_b1: pmx-vid-b1 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_power_resume_data: pmx-power-resume-data { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - pmx_power_resume_clk: pmx-power-resume-clk { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - - pmx_pwr_sata1: pmx-pwr-sata1 { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - /* This board uses the pcf8563 RTC instead of the SoC RTC */ - rtc@10300 { - status = "disabled"; - }; - - i2c@11000 { - status = "okay"; - - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_pwr_sata1>; - pinctrl-names = "default"; - - usb0_power: regulator@1 { - enable-active-high; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red - &pmx_led_usb_green - &pmx_led_sys_green &pmx_led_sys_orange - &pmx_led_copy_green &pmx_led_copy_red - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - - green-sys { - label = "nsa325:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - orange-sys { - label = "nsa325:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa325:green:hdd1"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - red-hdd1 { - label = "nsa325:red:hdd1"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - green-hdd2 { - label = "nsa325:green:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - red-hdd2 { - label = "nsa325:red:hdd2"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - green-usb { - label = "nsa325:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - green-copy { - label = "nsa325:green:copy"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - red-copy { - label = "nsa325:red:copy"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - /* The following pins are currently not assigned to a driver, - some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 - &pmx_power_resume_data &pmx_power_resume_clk>; */ - }; - -}; - -&mdio { - status = "okay"; - ethphy0: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/dts/kirkwood-nsa3x0-common.dtsi deleted file mode 100644 index a21c50d44a..0000000000 --- a/arch/arm/dts/kirkwood-nsa3x0-common.dtsi +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "ZyXEL NSA310"; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pmx_usb_power: pmx-usb-power { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - power { - label = "Power Button"; - linux,code = ; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - copy { - label = "Copy Button"; - linux,code = ; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - reset { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power>; - pinctrl-names = "default"; - - usb0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-openrd-base.dts b/arch/arm/dts/kirkwood-openrd-base.dts deleted file mode 100644 index 094191ece3..0000000000 --- a/arch/arm/dts/kirkwood-openrd-base.dts +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD Base Board Description - * - * Andrew Lunn - * - * This file contains the definitions that are specific to OpenRD - * base variant of the Marvell Kirkwood Development Board. - */ - -/dts-v1/; - -#include "kirkwood-openrd.dtsi" - -/ { - model = "OpenRD Base"; - compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - serial@12100 { - status = "okay"; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-openrd-client.dts b/arch/arm/dts/kirkwood-openrd-client.dts deleted file mode 100644 index 74dc23daf6..0000000000 --- a/arch/arm/dts/kirkwood-openrd-client.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD Client Board Description - * - * Andrew Lunn - * - * This file contains the definitions that are specific to OpenRD - * client variant of the Marvell Kirkwood Development Board. - */ - -/dts-v1/; - -#include "kirkwood-openrd.dtsi" - -/ { - model = "OpenRD Client"; - compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - audio-controller@a0000 { - status = "okay"; - }; - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - }; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&audio0 0>; - }; - - simple-audio-card,codec { - sound-dai = <&cs42l51>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@8 { - reg = <8>; - }; - ethphy1: ethernet-phy@24 { - reg = <24>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-openrd-ultimate.dts b/arch/arm/dts/kirkwood-openrd-ultimate.dts deleted file mode 100644 index 888e13320c..0000000000 --- a/arch/arm/dts/kirkwood-openrd-ultimate.dts +++ /dev/null @@ -1,55 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD Ultimate Board Description - * - * Andrew Lunn - * - * This file contains the definitions that are specific to OpenRD - * ultimate variant of the Marvell Kirkwood Development Board. - */ - -/dts-v1/; - -#include "kirkwood-openrd.dtsi" - -/ { - model = "OpenRD Ultimate"; - compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - }; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; - ethphy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "okay"; - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; diff --git a/arch/arm/dts/kirkwood-openrd.dtsi b/arch/arm/dts/kirkwood-openrd.dtsi deleted file mode 100644 index 47f03c69c5..0000000000 --- a/arch/arm/dts/kirkwood-openrd.dtsi +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Marvell OpenRD (Base|Client|Ultimate) Board Description - * - * Andrew Lunn - * - * This file contains the definitions that are common between the three - * variants of the Marvell Kirkwood Development Board. - */ - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; - pinctrl-names = "default"; - - pmx_select28: pmx-select-rs232-rs485 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_select34: pmx-select-uart-sd { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "okay"; - - }; - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - mvsdio@90000 { - status = "okay"; - cd-gpios = <&gpio0 29 9>; - }; - gpio@10100 { - p28 { - gpio-hog; - gpios = <28 GPIO_ACTIVE_HIGH>; - /* - * SelRS232or485 selects between RS-232 or RS-485 - * mode for the second UART. - * - * Low: RS-232 - * High: RS-485 - * - * To use the second UART, you need to change also - * the SelUARTorSD. - */ - output-low; - line-name = "SelRS232or485"; - }; - }; - gpio@10140 { - p2 { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - /* - * SelUARTorSD selects between the second UART - * (serial@12100) and SD (mvsdio@90000). - * - * Low: UART - * High: SD - * - * When changing this line make sure the newly - * selected device node is enabled and the - * previously selected device node is disabled. - */ - output-high; /* Select SD by default */ - line-name = "SelUARTorSD"; - }; - }; - }; -}; - -&nand { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@600000 { - label = "root"; - reg = <0x0600000 0x1FA00000>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood-pogo_e02.dts b/arch/arm/dts/kirkwood-pogo_e02.dts deleted file mode 100644 index f9e95e55f3..0000000000 --- a/arch/arm/dts/kirkwood-pogo_e02.dts +++ /dev/null @@ -1,132 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02 - * - * Copyright (C) 2015 Christoph Junghans - * - * based on information of dts files from - * Arch Linux ARM by Oleg Rakhmanov - * OpenWrt by Felix Kaechele - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Cloud Engines Pogoplug E02"; - compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", - "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; - }; - - gpio-leds { - compatible = "gpio-leds"; - - health { - label = "pogo_e02:green:health"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "pogo_e02:orange:fault"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange - &pmx_led_green >; - pinctrl-names = "default"; - - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led-green { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - - pmx_led_orange: pmx-led-orange { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; -}; - -&uart0 { - status = "okay"; -}; - -&nand { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0x5b00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/dts/kirkwood-pogoplug-series-4.dts deleted file mode 100644 index 5aa4669ae2..0000000000 --- a/arch/arm/dts/kirkwood-pogoplug-series-4.dts +++ /dev/null @@ -1,180 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4 - * inspired by the board files made by Kevin Mihelich for ArchLinux, - * and their DTS file. - * - * Copyright (C) 2015 Linus Walleij - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6192.dtsi" -#include - -/ { - model = "Cloud Engines PogoPlug Series 4"; - compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", - "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - chosen { - stdout-path = "uart0:115200n8"; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_button_eject>; - pinctrl-names = "default"; - - eject { - debounce-interval = <50>; - wakeup-source; - linux,code = ; - label = "Eject Button"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_green &pmx_led_red>; - pinctrl-names = "default"; - - health { - label = "pogoplugv4:green:health"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - fault { - label = "pogoplugv4:red:fault"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pinctrl { - pmx_sata0: pmx-sata0 { - marvell,pins = "mpp21"; - marvell,function = "sata0"; - }; - - pmx_sata1: pmx-sata1 { - marvell,pins = "mpp20"; - marvell,function = "sata1"; - }; - - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_sdio_wp: pmx-sdio-wp { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_button_eject: pmx-button-eject { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led-green { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_led_red: pmx-led-red { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* - * This PCIE controller has a USB 3.0 XHCI controller at 1,0 - */ -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&sata { - status = "okay"; - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - nr-ports = <1>; -}; - -&sdio { - status = "okay"; - pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; - pinctrl-names = "default"; - cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -}; - -&nand { - /* 128 MiB of NAND flash */ - chip-delay = <40>; - status = "okay"; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x200000>; - read-only; - }; - - partition@200000 { - label = "uImage"; - reg = <0x00200000 0x300000>; - }; - - partition@500000 { - label = "uImage2"; - reg = <0x00500000 0x300000>; - }; - - partition@800000 { - label = "failsafe"; - reg = <0x00800000 0x800000>; - }; - - partition@1000000 { - label = "root"; - reg = <0x01000000 0x7000000>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/dts/kirkwood-sheevaplug-common.dtsi deleted file mode 100644 index 0a698d3b73..0000000000 --- a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs - * - * Copyright (C) 2013 Simon Baatz - */ - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_red: pmx-led-red { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_blue: pmx-led-blue { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - pmx_sdio_cd: pmx-sdio-cd { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_sdio_wp: pmx-sdio-wp { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "okay"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 0>; - }; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "root"; - reg = <0x0500000 0x1fb00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/arch/arm/dts/kirkwood-sheevaplug.dts b/arch/arm/dts/kirkwood-sheevaplug.dts deleted file mode 100644 index c73cc904e5..0000000000 --- a/arch/arm/dts/kirkwood-sheevaplug.dts +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug - * - * Copyright (C) 2013 Simon Baatz - */ - -/dts-v1/; - -#include "kirkwood-sheevaplug-common.dtsi" - -/ { - model = "Globalscale Technologies SheevaPlug"; - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - ocp@f1000000 { - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_blue &pmx_led_red>; - pinctrl-names = "default"; - - health { - label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - misc { - label = "sheevaplug:red:misc"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - }; -}; diff --git a/arch/arm/dts/kirkwood-synology.dtsi b/arch/arm/dts/kirkwood-synology.dtsi deleted file mode 100644 index c97ed29a0a..0000000000 --- a/arch/arm/dts/kirkwood-synology.dtsi +++ /dev/null @@ -1,855 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Nodes for Marvell 628x Synology devices - * - * Andrew Lunn - * Ben Peddell - * - */ - -/ { - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_alarmled_12: pmx-alarmled-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_15: pmx-fanctrl-15 { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_16: pmx-fanctrl-16 { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_17: pmx-fanctrl-17 { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_18: pmx-fanalarm-18 { - marvell,pins = "mpp18"; - marvell,function = "gpo"; - }; - - pmx_hddled_20: pmx-hddled-20 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_hddled_21: pmx-hddled-21 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_hddled_22: pmx-hddled-22 { - marvell,pins = "mpp22"; - marvell,function = "gpio"; - }; - - pmx_hddled_23: pmx-hddled-23 { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - - pmx_hddled_24: pmx-hddled-24 { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_hddled_25: pmx-hddled-25 { - marvell,pins = "mpp25"; - marvell,function = "gpio"; - }; - - pmx_hddled_26: pmx-hddled-26 { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - - pmx_hddled_27: pmx-hddled-27 { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - pmx_hddled_28: pmx-hddled-28 { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_hdd1_pwr_30: pmx-hdd-pwr-30 { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 { - marvell,pins = "mpp31"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_32: pmx-fanctrl-32 { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - - pmx_fanctrl_33: pmx-fanctrl-33 { - marvell,pins = "mpp33"; - marvell,function = "gpo"; - }; - - pmx_fanctrl_34: pmx-fanctrl-34 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_35: pmx-fanalarm-35 { - marvell,pins = "mpp35"; - marvell,function = "gpio"; - }; - - pmx_hddled_36: pmx-hddled-36 { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_hddled_37: pmx-hddled-37 { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_hddled_38: pmx-hddled-38 { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - - pmx_hddled_39: pmx-hddled-39 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_hddled_40: pmx-hddled-40 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - - pmx_hddled_41: pmx-hddled-41 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_hddled_42: pmx-hddled-42 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_hddled_43: pmx-hddled-43 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - - pmx_hddled_44: pmx-hddled-44 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_hddled_45: pmx-hddled-45 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_44: pmx-fanalarm-44 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_fanalarm_45: pmx-fanalarm-45 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - }; - - rtc@10300 { - status = "disabled"; - }; - - spi@10600 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - mode = <0>; - - partition@0 { - reg = <0x00000000 0x00080000>; - label = "RedBoot"; - }; - - partition@80000 { - reg = <0x00080000 0x00200000>; - label = "zImage"; - }; - - partition@280000 { - reg = <0x00280000 0x00140000>; - label = "rd.gz"; - }; - - partition@3c0000 { - reg = <0x003c0000 0x00010000>; - label = "vendor"; - }; - - partition@3d0000 { - reg = <0x003d0000 0x00020000>; - label = "RedBoot config"; - }; - - partition@3f0000 { - reg = <0x003f0000 0x00010000>; - label = "FIS directory"; - }; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - - rs5c372: rs5c372@32 { - status = "disabled"; - compatible = "ricoh,rs5c372"; - reg = <0x32>; - }; - - s35390a: s35390a@30 { - status = "disabled"; - compatible = "sii,s35390a"; - reg = <0x30>; - }; - }; - - serial@12000 { - status = "okay"; - }; - - serial@12100 { - status = "okay"; - }; - - poweroff@12100 { - compatible = "synology,power-off"; - reg = <0x12100 0x100>; - clocks = <&gate_clk 7>; - }; - - sata@80000 { - pinctrl-0 = <&pmx_sata0 &pmx_sata1>; - pinctrl-names = "default"; - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio-fan-150-32-35 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 - &pmx_fanalarm_35>; - pinctrl-names = "default"; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH - &gpio1 1 GPIO_ACTIVE_HIGH - &gpio1 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; - }; - - gpio-fan-150-15-18 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_18>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; - }; - - gpio-fan-100-32-35 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 - &pmx_fanalarm_35>; - pinctrl-names = "default"; - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH - &gpio1 1 GPIO_ACTIVE_HIGH - &gpio1 2 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-fan-100-15-18 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_18>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-fan-100-15-35-1 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_35>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-fan-100-15-35-3 { - status = "disabled"; - compatible = "gpio-fan"; - pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 - &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>; - pinctrl-names = "default"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH - &gpio0 16 GPIO_ACTIVE_HIGH - &gpio0 17 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH - &gpio1 12 GPIO_ACTIVE_HIGH - &gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; - }; - - gpio-leds-alarm-12 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_alarmled_12>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:alarm"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-20 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22 - &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25 - &pmx_hddled_26 &pmx_hddled_27>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - - hdd3-green { - label = "synology:green:hdd3"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - hdd3-amber { - label = "synology:amber:hdd3"; - gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - }; - - hdd4-green { - label = "synology:green:hdd4"; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - - hdd4-amber { - label = "synology:amber:hdd4"; - gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-21-1 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-21-2 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-36 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38 - &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41 - &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44 - &pmx_hddled_45>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - hdd3-green { - label = "synology:green:hdd3"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - hdd3-amber { - label = "synology:amber:hdd3"; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - - hdd4-green { - label = "synology:green:hdd4"; - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - }; - - hdd4-amber { - label = "synology:amber:hdd4"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - }; - - hdd5-green { - label = "synology:green:hdd5"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - }; - - hdd5-amber { - label = "synology:amber:hdd5"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds-hdd-38 { - status = "disabled"; - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; - pinctrl-names = "default"; - - hdd1-green { - label = "synology:green:hdd1"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - - hdd1-amber { - label = "synology:amber:hdd1"; - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - hdd2-green { - label = "synology:green:hdd2"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - hdd2-amber { - label = "synology:amber:hdd2"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - }; - - regulators-hdd-29 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-30-1 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_30>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-30-2 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - }; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-30-4 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34 - &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd1power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; - }; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "hdd3power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "hdd4power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-31 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd2_pwr_31>; - pinctrl-names = "default"; - - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; - }; - }; - - regulators-hdd-34 { - status = "disabled"; - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44 - &pmx_hdd4_pwr_45>; - pinctrl-names = "default"; - - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdd2power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "hdd3power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "hdd4power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - startup-delay-us = <5000000>; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <8>; - }; - - ethphy1: ethernet-phy@1 { - device_type = "ethernet-phy"; - reg = <9>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -ð1 { - status = "disabled"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/arch/arm/dts/kirkwood.dtsi b/arch/arm/dts/kirkwood.dtsi deleted file mode 100644 index 81c7eda2c4..0000000000 --- a/arch/arm/dts/kirkwood.dtsi +++ /dev/null @@ -1,393 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" -#include -#include - -#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) - -/ { - compatible = "marvell,kirkwood"; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,feroceon"; - reg = <0>; - clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; - clock-names = "cpu_clk", "ddrclk", "powersave"; - }; - }; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - i2c0 = &i2c0; - }; - - mbus@f1000000 { - compatible = "marvell,kirkwood-mbus", "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - /* If a board file needs to change this ranges it must replace it completely */ - ranges = ; - controller = <&mbusc>; - pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ - pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - - nand: nand@12f { - #address-cells = <1>; - #size-cells = <1>; - cle = <0>; - ale = <1>; - bank-width = <1>; - compatible = "marvell,orion-nand"; - reg = ; - chip-delay = <25>; - /* set partition map and/or chip-delay in board dts */ - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "disabled"; - }; - - crypto_sram: sa-sram@301 { - compatible = "mmio-sram"; - reg = ; - clocks = <&gate_clk 17>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x0100000>; - #address-cells = <1>; - #size-cells = <1>; - - pinctrl: pin-controller@10000 { - /* set compatible property in SoC file */ - reg = <0x10000 0x20>; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", - "mpp24", "mpp25", "mpp26", "mpp27", - "mpp30", "mpp31", "mpp32", "mpp33"; - marvell,function = "ge1"; - }; - - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", "mpp19"; - marvell,function = "nand"; - }; - - /* - * Default SPI0 pinctrl setting with CSn on mpp0, - * overwrite marvell,pins on board level if required. - */ - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - - /* - * Default UART pinctrl setting without RTS/CTS, - * overwrite marvell,pins on board level if required. - */ - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; - }; - - core_clk: core-clocks@10030 { - compatible = "marvell,kirkwood-core-clock"; - reg = <0x10030 0x4>; - #clock-cells = <1>; - }; - - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <23>; - reg = <0x10600 0x28>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; - status = "disabled"; - }; - - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <35>, <36>, <37>, <38>; - clocks = <&gate_clk 7>; - }; - - gpio1: gpio@10140 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10140 0x40>; - ngpios = <18>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <39>, <40>, <41>; - clocks = <&gate_clk 7>; - }; - - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <29>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart0: serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <33>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart1: serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <34>; - clocks = <&gate_clk 7>; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; - status = "disabled"; - }; - - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x1500 0x20>; - }; - - sysc: system-controller@20000 { - compatible = "marvell,orion-system-controller"; - reg = <0x20000 0x120>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <1>; - marvell,#interrupts = <6>; - }; - - gate_clk: clock-gating-control@2011c { - compatible = "marvell,kirkwood-gating-clock"; - reg = <0x2011c 0x4>; - clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - l2: l2-cache@20128 { - compatible = "marvell,kirkwood-cache"; - reg = <0x20128 0x4>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - wdt: watchdog-timer@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>, <0x20108 0x4>; - interrupt-parent = <&bridge_intc>; - interrupts = <3>; - clocks = <&gate_clk 7>; - status = "okay"; - }; - - cesa: crypto@30000 { - compatible = "marvell,kirkwood-crypto"; - reg = <0x30000 0x10000>; - reg-names = "regs"; - interrupts = <22>; - clocks = <&gate_clk 17>; - marvell,crypto-srams = <&crypto_sram>; - marvell,crypto-sram-size = <0x800>; - status = "okay"; - }; - - usb0: ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <19>; - clocks = <&gate_clk 3>; - status = "okay"; - }; - - dma0: xor@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60A00 0x100>; - status = "okay"; - clocks = <&gate_clk 8>; - - xor00 { - interrupts = <5>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <6>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - - dma1: xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60B00 0x100>; - status = "okay"; - clocks = <&gate_clk 16>; - - xor00 { - interrupts = <7>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <8>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - - eth0: ethernet-controller@72000 { - compatible = "marvell,kirkwood-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 0>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - eth0port: ethernet0-port@0 { - compatible = "marvell,kirkwood-eth-port"; - reg = <0>; - interrupts = <11>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <46>; - clocks = <&gate_clk 0>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - - eth1: ethernet-controller@76000 { - compatible = "marvell,kirkwood-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76000 0x4000>; - clocks = <&gate_clk 19>; - marvell,tx-checksum-limit = <1600>; - pinctrl-0 = <&pmx_ge1>; - pinctrl-names = "default"; - status = "disabled"; - - eth1port: ethernet1-port@0 { - compatible = "marvell,kirkwood-eth-port"; - reg = <0>; - interrupts = <15>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ - }; - }; - - sata_phy0: sata-phy@82000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x82000 0x0334>; - clocks = <&gate_clk 14>; - clock-names = "sata"; - #phy-cells = <0>; - status = "ok"; - }; - - sata_phy1: sata-phy@84000 { - compatible = "marvell,mvebu-sata-phy"; - reg = <0x84000 0x0334>; - clocks = <&gate_clk 15>; - clock-names = "sata"; - #phy-cells = <0>; - status = "ok"; - }; - - audio0: audio-controller@a0000 { - compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; - reg = <0xa0000 0x2210>; - interrupts = <24>; - clocks = <&gate_clk 9>; - clock-names = "internal"; - status = "disabled"; - }; - }; -};