From: Jernej Skrabec Date: Mon, 10 Apr 2023 08:21:18 +0000 (+0200) Subject: sunxi: Parameterize some of H616 DDR3 timings X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=4a967cb95fd12f9f17e4ae12c1c35de337576f22;p=u-boot.git sunxi: Parameterize some of H616 DDR3 timings Currently twr2rd, trd2wr and twtp are constants, but according to vendor driver they are calculated from other values. Do that here too, in preparation for later introduction of new parameter. While at it, introduce constant for t_wr_lat, which was incorrectly calculated from tcl before. Signed-off-by: Jernej Skrabec Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- diff --git a/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c b/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c index 8f508344bc..f109e92082 100644 --- a/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c +++ b/arch/arm/mach-sunxi/dram_timings/h616_ddr3_1333.c @@ -48,10 +48,11 @@ void mctl_set_timing_params(struct dram_para *para) u8 tcl = 7; /* JEDEC: CL / 2 => 6 */ u8 tcwl = 5; /* JEDEC: 8 */ u8 t_rdata_en = 9; /* ? */ + u8 t_wr_lat = 5; /* ? */ - u8 twtp = 14; /* (WL + BL / 2 + tWR) / 2 */ - u8 twr2rd = trtp + 7; /* (WL + BL / 2 + tWTR) / 2 */ - u8 trd2wr = 5; /* (RL + BL / 2 + 2 - WL) / 2 */ + u8 twtp = tcl + 2 + tcwl; /* (WL + BL / 2 + tWR) / 2 */ + u8 twr2rd = trtp + 2 + tcwl; /* (WL + BL / 2 + tWTR) / 2 */ + u8 trd2wr = tcl + 3 - tcwl; /* (RL + BL / 2 + 2 - WL) / 2 */ /* set DRAM timing */ writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, @@ -85,7 +86,7 @@ void mctl_set_timing_params(struct dram_para *para) clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); /* Configure DFI timing */ - writel((tcl - 2) | 0x2000000 | (t_rdata_en << 16) | 0x808000, + writel(t_wr_lat | 0x2000000 | (t_rdata_en << 16) | 0x808000, &mctl_ctl->dfitmg0); writel(0x100202, &mctl_ctl->dfitmg1);