From: Jonathan Humphreys Date: Fri, 14 Jun 2024 16:35:51 +0000 (-0500) Subject: doc: board: ti: j784s4: document OSPI NOR layout X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=3e6fd29aa88c5c05a3e4057148ff74c7f2d7a3d2;p=u-boot.git doc: board: ti: j784s4: document OSPI NOR layout Added OSPI NOR flash layout diagram, as well as example commands to flash firmware to it. Added OSPI boot mode pin setting. Signed-off-by: Jonathan Humphreys --- diff --git a/doc/board/ti/img/ospi_sysfw3.svg b/doc/board/ti/img/ospi_sysfw3.svg new file mode 100644 index 0000000000..382867c6f4 --- /dev/null +++ b/doc/board/ti/img/ospi_sysfw3.svg @@ -0,0 +1,802 @@ + + + + + + + + + + + + + + + + + + + ospi.tiboot3(512k) + + + + ospi.tiboot3(512k) + + + + + + + + + + + + + + 0x0 + + + + + 0x0 + + + + + + + + + + + + + ospi.tispl(2M) + + + + ospi.tispl(2M) + + + + + + + + + + + + + + 0x80000 + + + + + 0x80000 + + + + + + + + + + + + + ospi.u-boot(4M) + + + + ospi.u-boot(4M) + + + + + + + + + + + + + + 0x280000 + + + + + 0x280000 + + + + + + + + + + + + + ospi.env(128K) + + + + ospi.env(128K) + + + + + + + + + + + + + + 0x680000 + + + + + 0x680000 + + + + + + + + + + + + + ospi.env.backup(128K) + + + + ospi.env.backup(128K) + + + + + + + + + + + + + + 0x6A0000 + + + + + 0x6A0000 + + + + + + + + + + + + + padding(1280K) + + + + padding(1280K) + + + + + + + + + + + + + + 0x6C0000 + + + + + 0x6C0000 + + + + + + + + + + + + + ospi.rootfs(UBIFS) + + + + ospi.rootfs(UBIFS) + + + + + + + + + + + + + + 0x800000 + + + + + 0x800000 + + + + + + + + + + + + + ospi.phypattern(256k) + + + + ospi.phypattern(256k) + + + + + + + + + + + + + + 0x3FC0000 + + + + + 0x3FC0000 + + + + + diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst index 5c4bd2c927..2ffec3dbd3 100644 --- a/doc/board/ti/j784s4_evm.rst +++ b/doc/board/ti/j784s4_evm.rst @@ -153,6 +153,31 @@ Image formats .. image:: img/dm_tispl.bin.svg :alt: tispl.bin format +OSPI: +----- +ROM supports booting from OSPI from offset 0x0. + +Flashing images to OSPI NOR: + +Below commands can be used to download tiboot3.bin, tispl.bin, and +u-boot.img over tftp and then flash those to OSPI at their respective +addresses. + +.. prompt:: bash => + + sf probe + tftp ${loadaddr} tiboot3.bin + sf update $loadaddr 0x0 $filesize + tftp ${loadaddr} tispl.bin + sf update $loadaddr 0x80000 $filesize + tftp ${loadaddr} u-boot.img + sf update $loadaddr 0x280000 $filesize + +Flash layout for OSPI NOR: + +.. image:: img/ospi_sysfw3.svg + :alt: OSPI NOR flash partition layout + R5 Memory Map ------------- @@ -262,6 +287,9 @@ section. * - SD - 0000 + * - OSPI + - 0010 + * - EMMC - 0110