From: Masahiro Yamada Date: Tue, 2 Feb 2016 03:53:31 +0000 (+0900) Subject: ARM: uniphier: update U-Boot file names in workflow X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=3cb9abc9c512;p=u-boot.git ARM: uniphier: update U-Boot file names in workflow Since commit ad1ecd2063da ("fdt: Build a U-Boot binary without device tree") and commit 03c25bcd263a ("fdt: Build an SPL binary without device tree"), we can use shorter file names for the output images. The default configuration for UniPhier SoCs enables CONFIG_OF_SEPARATE and CONFIG_SPL_OF_CONTROL. In this case, spl/u-boot-spl.bin is the same as spl/u-boot-spl-dtb.bin. Likewise, u-boot.img is the same as as u-boot-dtb.img. So, this change of the flow has no impact. Signed-off-by: Masahiro Yamada Reviewed-by: Simon Glass --- diff --git a/doc/README.uniphier b/doc/README.uniphier index bce70cf5fe..bcf0ac3d4b 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -68,8 +68,8 @@ Burn U-Boot images to NAND -------------------------- Write two files to the NAND device as follows: - - spl/u-boot-spl-dtb.bin at the offset address 0x00000000 - - u-boot-dtb.img at the offset address 0x00010000 + - spl/u-boot-spl.bin at the offset address 0x00000000 + - u-boot.img at the offset address 0x00010000 If a TFTP server is available, the images can be easily updated. Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public @@ -145,4 +145,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most of the boards. -- Masahiro Yamada -Aug. 2015 +Feb. 2016 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index b340f63cde..6f91ee61ae 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -230,9 +230,9 @@ "nor_base=0x42000000\0" \ "bootm_low=0x80000000\0" \ "nandupdate=nand erase 0 0x00100000 &&" \ - "tftpboot u-boot-spl-dtb.bin &&" \ + "tftpboot u-boot-spl.bin &&" \ "nand write $loadaddr 0 0x00010000 &&" \ - "tftpboot u-boot-dtb.img &&" \ + "tftpboot u-boot.img &&" \ "nand write $loadaddr 0x00010000 0x000f0000\0" \ LINUXBOOT_ENV_SETTINGS