From: Tom Rini Date: Sat, 12 Nov 2022 22:36:48 +0000 (-0500) Subject: Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=1a792803d8905373bc04bbc2a4dc7d0d1ecdd967;p=u-boot.git Convert CONFIG_SYS_NAND_NO_SUBPAGE_WRITE to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_NO_SUBPAGE_WRITE Signed-off-by: Tom Rini Reviewed-by: Simon Glass --- diff --git a/README b/README index 4309d93386..f24decf5e4 100644 --- a/README +++ b/README @@ -1806,11 +1806,6 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. -- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE - Option to disable subpage write in NAND driver - driver that uses this: - drivers/mtd/nand/raw/davinci_nand.c - Freescale QE/FMAN Firmware Support: ----------------------------------- diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index 977348e73f..25007793b3 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -78,6 +78,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_SYS_NAND_NO_SUBPAGE_WRITE=y CONFIG_NAND_DAVINCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig index afba285ffb..6c8a284e7c 100644 --- a/configs/k2e_hs_evm_defconfig +++ b/configs/k2e_hs_evm_defconfig @@ -53,6 +53,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_SYS_NAND_NO_SUBPAGE_WRITE=y CONFIG_NAND_DAVINCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 6c4563912b..fec29f2c91 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -78,6 +78,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_SYS_NAND_NO_SUBPAGE_WRITE=y CONFIG_NAND_DAVINCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig index 33624badae..f6ac484f2e 100644 --- a/configs/k2hk_hs_evm_defconfig +++ b/configs/k2hk_hs_evm_defconfig @@ -53,6 +53,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_SYS_NAND_NO_SUBPAGE_WRITE=y CONFIG_NAND_DAVINCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index e28054bcc7..bb91aa3534 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -78,6 +78,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_SYS_NAND_NO_SUBPAGE_WRITE=y CONFIG_NAND_DAVINCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig index 8f8bb54913..d10965a70f 100644 --- a/configs/k2l_hs_evm_defconfig +++ b/configs/k2l_hs_evm_defconfig @@ -56,6 +56,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_SYS_NAND_NO_SUBPAGE_WRITE=y CONFIG_NAND_DAVINCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 0e428418b2..3585031ddf 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -41,6 +41,10 @@ config SYS_NAND_USE_FLASH_BBT help Enable the BBT (Bad Block Table) usage. +config SYS_NAND_NO_SUBPAGE_WRITE + bool "Disable subpage write support" + depends on NAND_ARASAN || NAND_DAVINCI || NAND_KIRKWOOD + config NAND_ATMEL bool "Support Atmel NAND controller" select SYS_NAND_SELF_INIT diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 6c01ab813e..b8b4b28b3d 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \