From: Matthias Schiffer Date: Wed, 27 Sep 2023 13:43:14 +0000 (+0200) Subject: arm: mach-k3: common: fix compile warnings with PHYS_64BIT on 32bit X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=17deab0edd2ba0a79a2b566c9a4e52e303bed362;p=u-boot.git arm: mach-k3: common: fix compile warnings with PHYS_64BIT on 32bit Use uintptr_t instead of phys_addr_t where appropriate, so passing the addresses to writel() doesn't result in compile warnings when PHYS_64BIT is set for 32bit builds (which is actually a useful configuration, as the K3 SoC family boots from an R5 SPL, which may pass bank information based on gd->bd->bi_dram to fdt_fixup_memory_banks() etc., so PHYS_64BIT is needed for fixing up the upper bank). Signed-off-by: Matthias Schiffer --- diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index cc755dd1bf..c3006ba387 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -84,10 +84,10 @@ void k3_sysfw_print_ver(void) ti_sci->version.firmware_revision, fw_desc); } -void mmr_unlock(phys_addr_t base, u32 partition) +void mmr_unlock(uintptr_t base, u32 partition) { /* Translate the base address */ - phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE; + uintptr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE; /* Unlock the requested partition if locked using two-step sequence */ writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0); diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index 9bd9ad6d1a..eabb44f620 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -38,7 +38,7 @@ void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size); int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr); void k3_sysfw_print_ver(void); void spl_enable_dcache(void); -void mmr_unlock(phys_addr_t base, u32 partition); +void mmr_unlock(uintptr_t base, u32 partition); bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data); enum k3_device_type get_device_type(void); void ti_secure_image_post_process(void **p_image, size_t *p_size);