From: Adam Ford Date: Wed, 1 May 2024 09:57:51 +0000 (-0500) Subject: arm: ti: am3517_evm: Migrate to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=160ab4ba9fe1d112e98bcdfc708be305907377c9;p=u-boot.git arm: ti: am3517_evm: Migrate to OF_UPSTREAM With the feature of OF_UPSTREAM now available, the device trees for the SOM and baseboard can now deleted and the device tree locations need to point to the ti/omap directory. Signed-off-by: Adam Ford V2: Remove DT reference from Makefile. --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d6135c41ad..f9b582a87e 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -482,7 +482,6 @@ dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \ am437x-idk-evm.dtb \ am4372-generic.dtb \ am437x-cm-t43.dtb -dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ diff --git a/arch/arm/dts/am3517-evm.dts b/arch/arm/dts/am3517-evm.dts deleted file mode 100644 index d21bb2ccd0..0000000000 --- a/arch/arm/dts/am3517-evm.dts +++ /dev/null @@ -1,339 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "am3517.dtsi" -#include "am3517-som.dtsi" -#include "am3517-evm-ui.dtsi" -#include - -/ { - model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; - compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; - - aliases { - display0 = &lcd0; - }; - - chosen { - stdout-path = &uart3; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - vmmc_fixed: vmmc { - compatible = "regulator-fixed"; - regulator-name = "vmmc_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - button-user { - label = "User Push Button"; - linux,code = ; - gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; - }; - - switch-1 { - label = "User Switch 1"; - linux,code = ; - gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; - }; - - switch-2 { - label = "User Switch 2"; - linux,code = ; - gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; - }; - - switch-3 { - label = "User Switch 3"; - linux,code = ; - gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; - }; - - switch-4 { - label = "User Switch 4"; - linux,code = ; - gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; - }; - - switch-5 { - label = "User Switch 5"; - linux,code = ; - gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; - }; - - switch-6 { - label = "User Switch 6"; - linux,code = ; - gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; - }; - - switch-7 { - label = "User Switch 7"; - linux,code = ; - gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; - }; - - switch-8 { - label = "User Switch 8"; - linux,code = ; - gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; - - user_led_1 { - label = "am3517evm:green:user_led_1"; - gpios = <&tca6416 7 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - user_led_2 { - label = "am3517evm:green:user_led_2"; - gpios = <&tca6416 6 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - user_led_3 { - label = "am3517evm:green:user_led_3"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; /* SD/MMC card activity */ - }; - - user_led_4 { - label = "am3517evm:green:user_led_4"; - gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - lcd0: display@0 { - /* This isn't the exact LCD, but the timings meet spec */ - /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ - compatible = "newhaven,nhd-4.3-480272ef-atxl"; - label = "15"; - backlight = <&bl>; - enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ - vcc-supply = <&vdd_io_reg>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - }; - - bl: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - power-supply = <&vdd_io_reg>; - pinctrl-0 = <&backlight_pins>; - pwms = <&pwm11 0 5000000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <7>; - enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */ - }; - - pwm11: pwm-11 { - compatible = "ti,omap-dmtimer-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - ti,timers = <&timer11>; - #pwm-cells = <3>; - ti,clock-source = <0x01>; - }; - - /* HS USB Host PHY on PORT 1 */ - hsusb1_phy: hsusb1_phy { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ - #phy-cells = <0>; - }; -}; - -&davinci_emac { - pinctrl-names = "default"; - pinctrl-0 = <ðernet_pins>; - status = "okay"; -}; - -&davinci_mdio { - status = "okay"; -}; - -&dss { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins>; - - vdds_dsi-supply = <&vdd_io_reg>; - vdda_video-supply = <&vdd_io_reg>; - - port { - dpi_out: endpoint { - remote-endpoint = <&lcd_in>; - data-lines = <16>; - }; - }; -}; - -&i2c2 { - clock-frequency = <400000>; - /* User DIP swithes [1:8] / User LEDS [1:2] */ - tca6416: gpio@21 { - compatible = "ti,tca6416"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - vcc-supply = <&vdd_io_reg>; - }; -}; - -&i2c3 { - clock-frequency = <400000>; -}; - -&mmc1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&vmmc_fixed>; - bus-width = <4>; - wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */ -}; - -&mmc3 { - status = "disabled"; -}; - -&usbhshost { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; - port1-mode = "ehci-phy"; -}; - -&usbhsehci { - phys = <&hsusb1_phy>; -}; - -&omap3_pmx_core { - - ethernet_pins: pinmux_ethernet_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ - OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ - OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ - OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ - OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ - OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ - OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ - OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ - OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ - OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ - >; - }; - - leds_pins: pinmux_leds_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */ - OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */ - >; - }; - - mmc1_pins: pinmux_mmc1_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */ - OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */ - >; - }; - - pwm_pins: pinmux_pwm_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */ - >; - }; - - backlight_pins: pinmux_backlight_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ - >; - }; - - dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - >; - }; - - hsusb1_rst_pins: pinmux_hsusb1_rst_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ - >; - }; -}; - -&omap3_pmx_core2 { - - hsusb1_pins: pinmux_hsusb1_pins { - pinctrl-single,pins = < - OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ - OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ - OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ - OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ - OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ - OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ - OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ - OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ - OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ - OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ - OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ - OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ - >; - }; -}; diff --git a/arch/arm/dts/am3517-som.dtsi b/arch/arm/dts/am3517-som.dtsi deleted file mode 100644 index 8b669e2eaf..0000000000 --- a/arch/arm/dts/am3517-som.dtsi +++ /dev/null @@ -1,234 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2016 Derald D. Woods - * - * Based on am3517-evm.dts - */ - -/ { - cpus { - cpu@0 { - cpu0-supply = <&vdd_core_reg>; - }; - }; - - wl12xx_buffer: wl12xx_buf { - compatible = "regulator-fixed"; - regulator-name = "wl1271_buf"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_buffer_pins>; - gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */ - regulator-always-on; - vin-supply = <&vdd_1v8_reg>; - }; - - wl12xx_vmmc2: wl12xx_vmmc2 { - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_wkup_pins>; - gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */ - startup-delay-us = <70000>; - enable-active-high; - regulator-always-on; - vin-supply = <&wl12xx_buffer>; - }; -}; - -&gpmc { - ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ - - nand@0,0 { - compatible = "ti,omap2-nand"; - linux,mtd-name = "micron,mt29f4g16abchch"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - gpmc,device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - s35390a: s35390a@30 { - compatible = "sii,s35390a"; - reg = <0x30>; - - pinctrl-names = "default"; - pinctrl-0 = <&rtc_pins>; - interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */ - }; - - tps: tps65023@48 { - compatible = "ti,tps65023"; - reg = <0x48>; - - regulators { - vdd_core_reg: VDCDC1 { - regulator-name = "vdd_core"; - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vdd_io_reg: VDCDC2 { - regulator-name = "vdd_io"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_1v8_reg: VDCDC3 { - regulator-name = "vdd_1v8"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vdd_usb18_reg: LDO1 { - regulator-name = "vdd_usb18"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vdd_usb33_reg: LDO2 { - regulator-name = "vdd_usb33"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - }; - }; - - touchscreen: tsc2004@4b { - compatible = "ti,tsc2004"; - reg = <0x4b>; - - vio-supply = <&vdd_io_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&tsc2004_pins>; - interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */ - - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - touchscreen-fuzz-pressure = <2>; - touchscreen-size-x = <480>; - touchscreen-size-y = <272>; - touchscreen-max-pressure = <2048>; - - ti,x-plate-ohms = <280>; - ti,esd-recovery-timeout-ms = <8000>; - }; -}; - -&mmc2 { - interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>; - - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; - vmmc-supply = <&wl12xx_vmmc2>; - non-removable; - bus-width = <4>; - cap-power-off-card; - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1271"; - reg = <2>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */ - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bluetooth { - compatible = "ti,wl1271-st"; - enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */ - max-speed = <3000000>; - }; -}; - -&omap3_pmx_core { - - wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ - >; - }; - - mmc2_pins: pinmux_mmc2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ - OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ - OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */ - OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */ - OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */ - OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */ - OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */ - OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */ - OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */ - OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */ - OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */ - >; - }; - - rtc_pins: pinmux_rtc_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ - >; - }; - - tsc2004_pins: pinmux_tsc2004_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ - OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */ - >; - }; -}; - -&omap3_pmx_wkup { - - wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ - >; - }; -}; diff --git a/arch/arm/dts/am3517.dtsi b/arch/arm/dts/am3517.dtsi deleted file mode 100644 index 2633fae14b..0000000000 --- a/arch/arm/dts/am3517.dtsi +++ /dev/null @@ -1,109 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for am3517 SoC - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include "omap3.dtsi" - -/ { - aliases { - serial3 = &uart4; - can = &hecc; - }; - - ocp@68000000 { - am35x_otg_hs: am35x_otg_hs@5c040000 { - compatible = "ti,omap3-musb"; - ti,hwmods = "am35x_otg_hs"; - status = "disabled"; - reg = <0x5c040000 0x1000>; - interrupts = <71>; - interrupt-names = "mc"; - }; - - davinci_emac: ethernet@5c000000 { - compatible = "ti,am3517-emac"; - ti,hwmods = "davinci_emac"; - status = "disabled"; - reg = <0x5c000000 0x30000>; - interrupts = <67 68 69 70>; - syscon = <&scm_conf>; - ti,davinci-ctrl-reg-offset = <0x10000>; - ti,davinci-ctrl-mod-reg-offset = <0>; - ti,davinci-ctrl-ram-offset = <0x20000>; - ti,davinci-ctrl-ram-size = <0x2000>; - ti,davinci-rmii-en = /bits/ 8 <1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - clocks = <&emac_ick>; - clock-names = "ick"; - }; - - davinci_mdio: mdio@5c030000 { - compatible = "ti,davinci_mdio"; - ti,hwmods = "davinci_mdio"; - status = "disabled"; - reg = <0x5c030000 0x1000>; - bus_freq = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&emac_fck>; - clock-names = "fck"; - }; - - uart4: serial@4809e000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - status = "disabled"; - reg = <0x4809e000 0x400>; - interrupts = <84>; - dmas = <&sdma 55 &sdma 54>; - dma-names = "tx", "rx"; - clock-frequency = <48000000>; - }; - - omap3_pmx_core2: pinmux@480025d8 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x480025d8 0x24>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - hecc: can@5c050000 { - compatible = "ti,am3517-hecc"; - status = "disabled"; - reg = <0x5c050000 0x80>, - <0x5c053000 0x180>, - <0x5c052000 0x200>; - reg-names = "hecc", "hecc-ram", "mbx"; - interrupts = <24>; - clocks = <&hecc_ck>; - }; - }; -}; - -/* Table Table 5-79 of the TRM shows 480ab000 is reserved */ -&usb_otg_hs { - status = "disabled"; -}; - -&iva { - status = "disabled"; -}; - -&mailbox { - status = "disabled"; -}; - -&mmu_isp { - status = "disabled"; -}; - -/include/ "am35xx-clocks.dtsi" -/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/dts/am35xx-clocks.dtsi b/arch/arm/dts/am35xx-clocks.dtsi deleted file mode 100644 index 220d0a5279..0000000000 --- a/arch/arm/dts/am35xx-clocks.dtsi +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for OMAP3 clock data - * - * Copyright (C) 2013 Texas Instruments, Inc. - */ -&scm_clocks { - emac_ick: emac_ick@32c { - #clock-cells = <0>; - compatible = "ti,am35xx-gate-clock"; - clocks = <&ipss_ick>; - reg = <0x032c>; - ti,bit-shift = <1>; - }; - - emac_fck: emac_fck@32c { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&rmii_ck>; - reg = <0x032c>; - ti,bit-shift = <9>; - }; - - vpfe_ick: vpfe_ick@32c { - #clock-cells = <0>; - compatible = "ti,am35xx-gate-clock"; - clocks = <&ipss_ick>; - reg = <0x032c>; - ti,bit-shift = <2>; - }; - - vpfe_fck: vpfe_fck@32c { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&pclk_ck>; - reg = <0x032c>; - ti,bit-shift = <10>; - }; - - hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c { - #clock-cells = <0>; - compatible = "ti,am35xx-gate-clock"; - clocks = <&ipss_ick>; - reg = <0x032c>; - ti,bit-shift = <0>; - }; - - hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_ck>; - reg = <0x032c>; - ti,bit-shift = <8>; - }; - - hecc_ck: hecc_ck@32c { - #clock-cells = <0>; - compatible = "ti,am35xx-gate-clock"; - clocks = <&sys_ck>; - reg = <0x032c>; - ti,bit-shift = <3>; - }; -}; -&cm_clocks { - ipss_ick: ipss_ick@a10 { - #clock-cells = <0>; - compatible = "ti,am35xx-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; - }; - - rmii_ck: rmii_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; - - pclk_ck: pclk_ck { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <27000000>; - }; - - uart4_ick_am35xx: uart4_ick_am35xx@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; - - uart4_fck_am35xx: uart4_fck_am35xx@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; - }; -}; - -&cm_clockdomains { - core_l3_clkdm: core_l3_clkdm { - compatible = "ti,clockdomain"; - clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>, - <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>, - <&hecc_ck>; - }; - - core_l4_clkdm: core_l4_clkdm { - compatible = "ti,clockdomain"; - clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>, - <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>, - <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>, - <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>, - <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>, - <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>, - <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>, - <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>, - <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>, - <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>, - <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, - <&uart4_ick_am35xx>, <&uart4_fck_am35xx>; - }; -}; diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 66bb4f6371..70498ca7fb 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -8,7 +8,7 @@ CONFIG_TI_COMMON_CMD_OPTIONS=y CONFIG_NR_DRAM_BANKS=2 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 -CONFIG_DEFAULT_DEVICE_TREE="am3517-evm" +CONFIG_DEFAULT_DEVICE_TREE="ti/omap/am3517-evm" CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_TARGET_AM3517_EVM=y CONFIG_EMIF4=y @@ -58,6 +58,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1920k(u-boot),256k(u-bo CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_UPSTREAM=y CONFIG_ENV_OVERWRITE=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y